Commercial

Industrial Healthcare

Education

Founded in 1996

Privately held Texas Corporation

Over 300 highly skilled employees

120 Plus Service Vehicles

Headquarters: Houston, Texas

Over (300,000 ft2) on approximately 16 acres which consist of Corporate Offices,

Service & Plumbing Department, Part Distribution, Manufacturing /Fabrication

Facilities, Testing and Mechanical Field Services

A Global Customer Base

Parts: HVAC Parts Division Fully Stocked Replacement & Warranty Components

OEM Parts

Available 24/7/365

Design/Build: Manufacturing Division Engineering / Design Services

Equipment Fabrication & Manufacturing

Electrical Modifications and Custom Controls

Painting & Custom Coatings

Equipment Retrofit & Rebranding

Install: Mechanical Field Services Division Equipment Installation

Sheet Metal/Piping

Equipment Start Up and Commissioning

Service: HVAC Services Division HVAC Equipment Service, Repair and Maintenance

Equipment Training Services

IAQ/Duct Cleaning Services

ELECTRICAL / PIPING

ENGINEERING / PAINT /QC

SERVICE

MECHANICAL FIELD SERVICE

PARTS / TESTING

35 Southbelt Industrial Dr. Houston Texas 77047 Located in the Industrial Corridor of the SW Corner of Highway 288 South and Beltway 8

Campus

Safety Experience & Rate

2017

0.41 = Total Recordable Incident Rate (TRIR)

558,693 Man Hours

0.62 = Experience Modified Rate (EMR)

2016

0.00 = Total Recordable Incident Rate (TRIR)

533,578 Man Hours

0.62 = Experience Modified Rate (EMR)

2015

0.00 = Total Recordable Incident Rate (TRIR)

519,237 Man Hours

0.66 = Experience Modified Rate (EMR)

Dedicated Quality Control Manager on Every

Project

Daily Project QA Evaluations

Routine Equipment QA Inspections

QA/QC provides accountability to Customers

and Procedures

Lessons Learned Philosophy

Certified PMP-Project Managers

Projects are monitored using Microsoft Project to

manage production and delivery schedules

Industrial & Commercial Customers • MD Anderson

• Memorial Herman

• Memorial Southwest & Northwest

• Methodist Hospital

• Shriners Hospital

• University of Texas Medical Branch

• City of Houston Lab

• Surgicare

• ABB

• Siemens

• Yokogawa

• Baker Hughes

• Dow Chemical

• Koontz-Wagner

• PEMEX

• Johnson Controls, Inc.

• National Oilwell Varco (NOV)

• Powell Electric

• ExxonMobil

• ABB

• Bayer Chemical

• BP

• Fluor

Custom / Design Build HVAC Service &

Solutions • Commercial Buildings

• Analyzer / Powerhouse Specialist

• Oil & Gas Drilling Rigs

• Portable / Rental Equipment

• Marine / Offshore

Government • Lockheed Martin

• University of Houston

• University of Texas

• Western State Oklahoma Stated College

• Air Force Academy

• Lamar University

• Houston ISD

• Fort Bend ISD

• Dayton ISD

• Sweetwater ISD

• Richmond State School

• City of Corpus Christi

• City of Beaumont

• Dallas Waste Water Treatment Plant

Manufacturing / Fabrication (FAB) Design & Build

Engineered - PE’s on staff - Design Build - To stand alone or to fit your existing equipment's footprint

Capability to manufacture, paint / custom coatings, electrical and explosion proofing for the commercial and industrial industries

Provide fabricating, electrical and coating modifications to existing equipment

Hours of Operation

24/7

Engineering Logic Customer Specified or Industry Selected Components

Electronically commutated motors (ECMs) vary the motor RPMs in response to changing system conditions.

EC relief & supply fan grid with motorized impeller and airfoil blades allow for easy commissioning with control/motor/fan components suitably matched to each other along with the precision control of airflow, low noise, and exceptional efficiency.

Working to maintain a programmed air flow (CFM), based on occupancy and outdoor conditions, the CAPS AHU units with selected options recognizes up to 60% reduction in energy consumption.

UV light installed on the leaving air side of the evaporator coil to prevent mold and algae growth

Engineering Efficiency SEMCO Fusion Energy Wheel

Aluminum fluted and coated to maximize latent recovery

Recovery performance & pressure loss certified by AHRI

Fully UL-900 compliant

Project: 75,000 CFM Roof Top AHU

Location: Colorado Springs, Colorado

Project: 27,500 CFM AHU

Location: Katy, Texas

Manufacturing Division

Air Handling Units-(DX, Chilled Water, Steam & Hot Water)

Self Contained Air Conditioning Unit

100% redundant HVAC and Pressurization Systems

Explosion Proof Air Conditioning Equipment

Electrical Cabinet Coolers

Portable / Rental Equipment Packaging

Wall Mount HVAC Package Units

Chemical Filtration Systems

TYPES of Manufactured CAPS Equipment:

Completely Assembled

Fully Welded Base Aluminum Casing

Shipping Split

Three (3) Styles of Construction:

Unitized, Modular & Knock-Down

Modular System Components

Unitized Construction

Modular Construction

Knock-Down

NEC Standards for Division 1 and 2 locations

IEC Standards for Zone 1 and 2 locations

ABS & SMACNA construction standards

ASHRAE standards

The ETL Mark is proof of product compliance to North American safety standards.

A QMS certified according to ISO 9001 specifies who is responsible for which quality-related activities and which procedures are to be complied with.

UL brings clarity and empowers trust to support the responsible design, production, marketing, and purchase of the goods, solutions, and innovations of today and tomorrow.

QPS Accreditation demonstrates that the organization in question is fully qualified to test and certify products to the standards for which it is accredited.

CSA Group is a global provider of testing, inspection and certification services for products from a wide range of market sectors, and a leader in safety and environmental certification for Canada and the US.

Employee Safety and Training are Essential Aspects to Quality

75,000 CFM Roof Top AHU

Modular System Construction Completed Roof Top Unit

On Location in Colorado Springs, Colorado

Heat Pipe & Enthalpy Core Plate Exchanger AHU

effective and affordable energy recovery

DESIGN VIEW

BUILD VIEW

Custom Designed Fan Coil Unit

Education Industry

San Antonio, TX

Project: 27,500 CFM AHU

Location: Katy, Texas

230 Ton York Chiller

with Purge Panel to Declassify Enclosure

6 Ton Condensing Unit

Class 1, Division 2, Groups C & D

NEMA-7 Enclosure

Interior: General Purpose

Exterior: Class 1, Division 2, Groups C & D

12 ½ Ton Trane Package Unit

with Pressurization

NEMA-7 Enclosure

Custom cabinet and coil coating designed to meet the needs of harsh chemical and extreme temperature environments Can be done at the OEM level; before, during and after installation Energy Guard coating for coils, components and unit rejuvenation Energy Guard protects YOUR equipment

Mechanical Field Services (MFS) Install

Our MFS Division designs, selects and installs HVAC systems for Commercial and Industrial applications.

CAPABILITIES:

Renovations & retrofits

Custom sheet metal ductwork

Piping spool assemblies

Custom DX, chilled & hot water piping installation

System equipment start up and commissioning

Mechanical Field Service Division

Hot Water & Chill Water Coils

Project: 100% Outside Air Location: Houston, Texas

Timeframe: 3 day Demo/Install

Removed Equipment New Equipment: 9 Fan Array

Filter Racks Complete Mechanical System

Project Change Out – 100% Outside Air – Air Handler

Mechanical Field Service Division Project Change Out –Chilled Water AHU

Day 1 (Friday Evening) Disconnecting unit

Day 2 (Saturday Morning) Demo unit

Day 2 (Saturday Afternoon) Knock down AHU delivered

Day 3 (Sunday Afternoon) In place and running

Mechanical Field Service Division

Project: Chilled Water AHU & Duct Install Location: Florida

BEFORE

AFTER

Project: Duct Design & Install Medical Industry Location: Peru

Mechanical Field Service Division

Project: Duct Design & Install Location: North Dakota

HVAC & Plumbing Services Service

World wide service available

Startup & commissioning services

Technical training & support

Single source HVAC Service Provider

Quick response 24/7

Large service fleet (120+ service vehicles)

We Service All Makes and Models

Chillers

Air Handler Units Roof Top Units Split systems.

Computer room units. Exhaust & make-up air units.

Portable rental equipment. Refrigeration equipment.

Ice machines. Building automation.

EMS-energy management systems. Air scrubbers.

Air filtration systems and components. Boilers.

Water heaters. Plumbing systems and fixtures.

On-site Service, Repair and Maintenance of all types of heating, ventilation, air conditioning & refrigeration systems for the commercial & industrial

applications.

Extend the life of your equipment and cut down on repair costs!

Our Preventive Maintenance team provides complete turnkey services, including scheduled air filtration replacements, custom fittings, and facility

evaluations and recommendations for all types of commercial and industrial businesses.

•We design custom maintenance solutions that revolve around your individual facility needs:

Monthly, quarterly, and annual preventative maintenance agreements. Comprehensive maintenance agreements. Test and inspection services for HVAC & plumbing systems. IAQ duct cleaning services. Water treatment and conditioning services. Monthly or quarterly filter change outs (all sizes and efficiencies available). Media bed testing and service. Coil cleaning.

Custom Air Products & Services provides a wide range of plumbing service and maintenance programs for both

commercial or industrial facilities.

If it is leaking or clogged, we’ve got you covered!

Factory Tours & Customer Training:

Factory tours promotes customer feedback and establishes a “partnering relationship”

Customer training provides an opportunity to learn all details and features about your equipment

40,000 ft² of fully stocked replacement & warranty components

Reduced downtime

Available 24/7/365

Online warranty claims portal

Matt Phil

Carl Mark Andrew

Don

Ronnie

We are here to be your HVAC Solutions

Provider…..Let us know how we can Help!

In order to maintain our position as a world class manufacturer and service company, we have committed and continued to invest in

our company through manufacturing equipment, technology, training and most importantly, PEOPLE.

THANK YOU!

Custom Air Products & Services, Inc. 35 Southbelt Industrial Dr.

Houston, TX 77047 USA

www.customairproducts.com

(713) 460-9009

THIS DRAWING AND THE INFORMATION HEREIN CONTAINED ARE THE PROPERTY OF CUSTOM AIR PRODUCTS, WHICH HAS FURNISHED THEM IN CONFIDENCE UPON THE UNDERSTANDING AND CONDITION THAT ALL PERSONS, FIRMS OR CORPORATIONS RECEIVING SUCH DRAWINGS AND INFORMATION SHALL BY THE ACT OF RECEIVING THEM BE DEEMED TO HAVE AGREED: TO MAKE NO COPY, DUPLICATION, DISCLOSURE OR USE WHATSOEVER OF ALL OR ANY PART THEREOF EXCEPT AS EXPRESSLY AUTHORIZED IN WRITING BY CUSTOM AIR PRODUCTS: NOT TO GIVE, LEND OR OTHERWISE DISPOSE OF THIS DRAWING: AND TO RETURN THIS DRAWING PROMPTLY UPON REQUEST