COMMERCIAL DOOR - Architectural Builders Supply Inc. 780-224 SL24 FM SFGHFS3083SD 780-157 SL57 FSCP GHFS 21 GHFS 30. 03 Rockwell Slimline exit devices are suitable for all doors

www.rockwellsecurityinc.com

Rockwell Security Inc.

COMMERCIAL DOORHARDWARE

01

Aluminum Geared Continuous Hinges

Available in Full Mortise and Surface

Mount

Material: 6063 T6 Aluminum Alloy with

Interlocking Extrusions

Non-Handed Design

Standard duty with 16 Thrust type Self

Lubricating Concealed bearings

Heavy Duty with 32 Thrust type Self-

Lubricating concealed bearings per hinge

High degree of security

Anodized aluminum after machining

Through bolt and machine screws �xing

Template Hole Pattern

10 year Warranty

ROCKWELL CONTINUOUS HINGES

SPECIFICATIONS

10 SeriesFull Mortise Type

Flush Mount

Each hinge has an alignment stop

1/4” clearance between door and frame

24 SeriesFull Mortise Type

1/16” Door O�setDoor Edge Guard


GHMT 10

GHMT 24

02

ROCKWELL CONTINUOUS HINGES

SPECIFICATIONS

21 Series

Full Surface Type

1/32” Door O�set

Tamper Resistant Removable door leaf cover


30 Series

Full Surface Type

For Narrow Limited Frames

Tamper Resistant Removable door leaf cover


Part No. Roton Select Pemko

SFGHMT10‐83SD 780-112 SL11 FMSLF

SFGHFS2183SD 780-210 SL21 FS

SFGHMT2483SD 780-224 SL24 FM

SFGHFS3083SD 780-157 SL57 FSCP

GHFS 21

GHFS 30

03

Rockwell Slimline exit devices are suitable for all doors

including narrow stile doors with a minimum 2”

mounting surface. Rim Cylinder included for keyed entry.

Grade - ANSI A156.3 Grade 2

Warranty - 10 years

ROCKWELL SLIMLINE PANIC EXIT DEVICES

SPECIFICATIONS

Slimline �ts 2” narrow aluminum door stiles

Door thickness: 1-3/4”

Cylinder: SC1 Keyway

Underwriters' Laboratories Inc. UL Listed - 3 hour Fire Rating

Handing: Non-handed and reversible

Latch bolt : 5/8” Throw

Dogging: Hex Key dogging

Door width: 36” Standard

Finishes: Aluminum and Duronodic

Part No. Size Finish

SFEDSL36AL Fire Rated Aluminum

SFEDSL36DU Fire Rated Bronze

ROCKWELL SLIMLINE CONCEALED VERTICAL ROD

Rockwell Slimline “Concealed Vertical Rod” exit devices

are for all doors including 2” narrow door stiles.


SFEDSLCVR36AL Fire Rated Aluminum

SFEDSLCVR36DU Fire Rated Bronze

SPECIFICATIONS


Cylinder: SC1 Keyway

Concealed Vertical Rod Standard for 7’0”door height

Handing: Non-handed, Field reversible

Latch bolt: 5/8” Throw

Dogging: Hex Key dogging

Door width: 36” Standard

Finishes: Aluminum and Duronodic


Warranty - 10 years

04

Rockwell exit devices are suitable for medium and

wide stile doors (aluminum, hollow metal, or wood)

where there is no projection on the face. Available

in Stainless Steel or extruded anodized aluminum.


Warranty - 10 years

SFEDT Series

ROCKWELL EXIT DEVICE

SPECIFICATIONS

Material: Anodized aluminum push bar, or stainless steel

Latch: Stainless Steel, 3/4” throw - 5/8” deadlatch

Backset: 2-3/4” Covers 161 prep, includes latch & strike �ller plates

Strike: Surface mounted for 5/8” stop with shim

Projection: 2-1/2” - 1-7/8” dogged

Door Stile: 4-1/4” minimum

Handing: Reversible, non-handed

Door Thickness: 1-3/4” standard

Door Width: 36”


SFEDTBARAL Aluminum

SFEDTBARDU Bronze

SFEDTBARFAL Fire Rated Aluminum

SFEDTBARSS Fire Rated Stainless Steel

ROCKWELL TRIM OPTIONS

Handle set Trim

Exit device Trim

Lever Trim

Part No. Finish

TH1100-DUMED Aluminum

TH1100-TPED

Dummy

Entry Aluminum

Part No. Finish

TH1100-PLDUM Aluminum

TH1100-PLED

Dummy

Pull Trim Aluminum

Part No. Finish

TH1100-LHED Aluminum

TH1100-LHPS

Entry

Passage Aluminum

TH1100-LHST Dummy Aluminum

05

Finish

SPECIFICATIONSSPECIFICATIONS

ROCKWELL COMMERCIAL PULLS

Inline Back to Back Tempered Glass Mount Commercial

Pull Sizes: 10” or 12”

Material Speci�cations: Stainless Steel

Application: Heavy Glass Doors

Glass Thickness: 3/8” to 3/4”

Construction: 1” (25mm) Diameter

Glass Fabrication: 2 X 5/8” diameter holes— 10” CTC or 12” CTC

O�set Back to Back Tempered Glass Mount Commercial

Material Speci�cations: Stainless Steel

Glass Thickness: 3/8” to 3/4”

Construction: 1” (25mm) Diameter

O�set: 3”

Glass Fabrication:2 X 5/8” diameter holes— 10” CTC or 12” CTC

2 Through bolts for Glass mounting4 Metal Washers— 1-1/4” diameter with rubber gaskets.

2 Through bolts for Glass mounting4 Metal Washers— 1-1/4” diameter with rubber gaskets.

INCLUDESINCLUDES


SDHW1‐10BS 10" Brushed Stainless

SDHW1‐10PS 10" Polished Stainless

SDHW1‐12BS 12" Brushed Stainless

SDHW1‐12PS 12" Polished Stainless

Pull Sizes: 10” or 12”

Brushed Stainless

Part No. Size

10"

SDDPW1‐10PS 10" Polished Stainless

SDDPW1‐12‐BS 12" Brushed Stainless

SDDPW1‐12‐PS 12" Polished Stainless

SDDPW1‐10BS

FinishBrushed Stainless

06

ROCKWELL GLASS MOUNTED STRAIGHT COMBINATION PUSH AND PULL HANDLES

Rockwell Glass Mount Straight Combination Pulls are for

Use with 3/8” to 3/4” (10 - 19 mm) Glass thickness

SPECIFICATIONS

Fits 3/8” - 3/4” (10 - 19 mm) Glass

Diameter: 1” (25mm)

Material: Stainless Steel or Brass Tubing

Glass Fabrication: 3-5/8” (16 mm)

** TEMPERED GLASS Use Only

Holes: 28” (711 mm CTC)

2 Through bolts for Glass mounting

4 Metal Washers— 1-1/4” diameter

INCLUDES


CPPW10X28BS 10”x 28” Brushed Stainless

CPPW10X28PS 10”x 28” Polished Stainless

CPPW12X28BS 12”x 28” Brushed Stainless

CPPW12X28PS 12”x 28” Polished Stainless

Diameter

with rubber gaskets.

Part No. Finish

DA-DPS02-AL Aluminum

DA-DPS02-BL Black

DA-DPS02--CP

Brushed StainlessDA-DPS02-US15

Polished Stainless

2-1/2”

1-3/4”

1”

ROCKWELL DUSTPROOF KEEPER WITH MOUNTING PLATE

Rockwell Dustproof Keeper with Mounting Plate available in four

�nishes in Locking models. Accepts 5/8” (16 mm) Diameter Plunger Bolt

SPECIFICATIONS

Fits 5/8” (16 mm) Plunger from these or similar devices

Function: Locking

Material: Stainless Steel

2 Flat Head Screws

(Requires a 1” diameter hole drilled 2” into �oor for installation)

INCLUDES

07

ROCKWELL DEADLATCH MORTISELOCKSET

Material Speci�cations: Steel in zinc dichromate �nish.

Backset: 31/32”, 1-1/8”

Non-handed—�eld reversible

Cylinder: Lock Accepts Standard 1-5/32” mortise cylinders

Faceplate: 1” W x 6-7/8” L

SPECIFICATIONSSPECIFICATIONS

ROCKWELL DEADBOLT MORTISE LOCKSET

Material Speci�cations: Steel in zinc dichromate �nish.

Backset: 31/32”, 1-1/8”



Part No. Material Backset

SFDB01118 Steel 1‐1/8

SFDB013132 Steel 31/32

Part No. Material Backset

SFDL01118 Steel 1‐1/8

SFDL013132 Steel 31/32

08

SPECIFICATIONS

ROCKWELL STAINLESS STEELDEADLOCKING HOOK BOLT

Material Speci�cations: All Stainless Steel, Steel with Stainless Steel Hook (Steel in zinc dichromate �nish)

Backset: 31/32”, 1-1/8”



Lock Bolt: 5/8” x 1-3/8” with 13/16” throw

5 Ply laminated stainless steel or steel with anti-saw core

Lock Accepts 1-5/32”

Mortise cylinder (sold separately) from both sides. MS Cam

Faceplates sold separately in Duronodic or Aluminum �nishes and are available in radius, �at, bevel, and with weather strip.

Part No. Casing Hook Backset

SFHBSS118 StainlessSteel

StainlessSteel

1‐1/8

SFHBSS3132 31/32

SFHB00118Steel

1‐1/8

SFHBSTS3132

StainlessSteel 31/32

FACEPLATE INFORMATION

FLAT L.H. BEVEL R.H. BEVEL RADIUSR.H. BEVELRADIUS WITH

WEATHER STRIP

FP1 FP2 FP3 FP4 FP5For Deadbolt For Deadbolt For Deadbolt For Deadbolt For Deadbolt

FP6 FP7 FP8 FP9 FP10For HookBolt For HookBolt For HookBolt For HookBolt For HookBolt

FP11 FP12 FP13 FP14 FP15For Deadlatch For Deadlatch For Deadlatch For Deadlatch For Deadlatch

FOR DEADBOLT FOR HOOKBOLT FOR DEADLATCH

25.5

16.5

73.8

6.2

15.7

92.2

50.9

174.

5

25.5

16.5

16.7

15.7

22.4

58.8

50.9

92.2

174.

5

25.5

16.7

15.7

47.5

26.6

96.8

77.

2

174.

5

09

ROCKWELL MORTISE CYLINDERS

SPECIFICATIONS

Diameter: 1-5/32”

5 PIN mortise keyed cylinder SC1 Keyway

Cam: MS-type cam

Finishes: Aluminum and Bronze

Functions: Keyed, Privacy thumbturn or dummy

Available in singles or pairs keyed di�erentlyor keyed alike

Supplied with trim ring 1/4” thickPart No. Function Finish

SFZCX1AL Aluminum

SFZCX1DU Bronze

SFZCX2AL

SFZCX2DU

SingleKeyed Di�erent

Bronze

Aluminum Keyed Di�erent Pair

SFZCX1ALKA

SFZCX1DUKA Bronze

Aluminum Keyed Alike Single

SFZCX2ALKA

SFZCX2DUKA Bronze

Aluminum Keyed Alike Pair

Quantity

Part No. Function Finish

SFRCAL Aluminum

SFRCDU BronzeKeyed Di�erent

Part No. Function Finish

SFDUMAL Aluminum

SFDUMDU Bronze

Dummy

Part No. Material Finish

SFZTAL Aluminum

SFZTDU BronzeZinc

SFBTAL Aluminum

SFBTDU BronzeBrass

Dummy

10

Works with Standard Deadlatches.

Field Reversible with Cam Plug included.

Non-handed and reversible handle. For use

with Rockwell Deadlatch or narrow

stile mortise deadlatches.

Material: Aluminum Alloy

Escutcheon: 1-3/8” x 4 “

Spindle: 1/4” square

ROCKWELL PUSH-PULL PADDLE

ROCKWELL LEVER HANDLE

Part No. Description

SFLH-AL Aluminum

SFLH-DU Bronze

SPECIFICATIONS

SPECIFICATIONS

Part No. Handing Finish

SFPUSHALLH LH Aluminum

SFPUSHALRH RH Aluminum

SFPUSHDULH LH Bronze

SFPUSHDURH RH Bronze

ROCKWELL ACCESSORIES

TR1Extruded Trim Ring

TR2Stamped

Trim Ring

CG1Anti-Wrench

Collar

STRIKES

ST2Single Strike

ST1Double Strike

Part No. Finish

SFTR1AL Aluminum

SFTR1DU Bronze

SFTR2AL Aluminum

SFTR2DU Bronze

SFCG1AL Aluminum

SFCG1DU Bronze

Part No. Finish

SFST2 Aluminum

SFST1 Aluminum

CYLINDER GUARD

11

ROCKWELL OFFSET PIVOTS

Diecast Aluminum Construction1/8” Vertical AdjustmentTamper Proof with full race bearingsNon-Handed, Reversible1/8” Recessed

SFOP10Suitable for Arch, Vistawall

Handed — Not Reversible

1/8” Recessed

SFOP12Suitable for Amarlite

Handed — Not Reversible

1/8” Recessed


SFOP10LHAL Left Hand Aluminum

SFOP10RHAL Right Hand Aluminum

SFOP10LHDU Left Hand Bronze

SFOP10RHDU Right Hand Bronze






Part No. Finish

SFOP09AL Aluminum

SFOP09DU Bronze

SFOP09

1-1/4”

1/2”

1-1/4” 7/8”

1-3/

4”

2-7/16”

1-1/4”

1-3/

4”

9/16”

3/8”

1-1/4”

1-3/4”

1-1/4” 7/8”

3/8”

1-1/4”

1-3/4”

9/16”

11/16”

9/16”

2-15/16”

15/16”

2-7/16”

5/16”

1-7/16”

1-1/4” 1-5/16”

3/8”

1-5/16”

2-1/

4”

1/2”

2-15/16”

5/16”

1-1/8”

2-1/

16”

15/16” 3/4”9/16”

1-5/16”

2-1/

4”

SFOP09

SFOP10

SFOP12

12

ROCKWELL OFFSET PIVOTS

SFOP14Suitable for US Aluminum1/8” Recessed

Diecast Aluminum Construction

1/8” Vertical Adjustment

Tamper Proof with full race bearings


SFOP14ULHAL Left Hand Aluminum

SFOP14URHAL Right Hand Aluminum

SFOP14ULHDU Left Hand Bronze

SFOP14URHDU Right Hand Bronze

1118Suitable for KawneerPivot—top and bottoms sold separately.


1118BLHAL Left Hand Aluminum

1118BRHAL Right Hand Aluminum

1118BLHDU Left Hand Bronze

1118BRHDU Right Hand Bronze

SFOP14KMSuitable for Pitco1/8” Recessed


SFOP14KMLHAL Left Hand Aluminum

SFOP14KMRHAL Right Hand Aluminum

SFOP14KMLHDU Left Hand Bronze

SFOP14KMRHDU Right Hand Bronze

Part No. Finish

1118TAL Aluminum

1118TDU Bronze

1-3/8”1-3/8”

9/16”

1-7/

8”

1-1/2”

9/16”

1-5/8”

1-7/

8”

13/16”3/4”

1/2”

3-1/4”5/16”

1-5/

16”

13/1

6”

3/8”7/8”

1-1/8”

5/16”

11/1

6”1-

5/16

”1-

7/16

”

SFOP14

SFOP14KM

1118

1-1/4”

1-3/8”5/8”

2-1/8”

2-11/16”

7/8” 1-1/16”

5/16”3/8”

1”

2-1/8”

1-3/8”

7/16”

1-3/8”

3/8”11/16”

3/4”

3/8”

1-3/8”

9/16”

2-1/

8”

2-1/

8”

1-3/8”

1-1/4” 5/8”

7/16”

2-11/16”

7/8” 1-1/16”3/8”

5/16”3/8”

1”

1/2”

1/4”

13

ROCKWELL OFFSET PIVOTSDiecast Aluminum Construction

1/8” Vertical Adjustment

Tamper Proof with full race bearings

SFOP13Suitable for YKK

Handed—Not Reversible






SFOP16Suitable for AldoraHanded Not ReversibleRecessed






Intermediate Pivot

Suitable for Arch / Amarlite

Part No. Finish

SFOP11120AL Aluminum

SFOP11120DU Bronze

SFOP11120

Intermediate Pivot

Suitable for Kawneer

Part No. Finish

SFOP11121AL Aluminum

SFOP11121DU Bronze

SFOP11121

1/8”

1/2”

1-5/16” 1/4”

2-1/4”

11/16”2”

1-1/2”

11/16”

4-1/8”2-1/2”

1-1/4”

1/8”

1/2”

1-5/16” 1/4”

2-1/4”

7/8”

2-1/4”

1-1/2”

1”

1-7/16”

2-3/16”

1/2”

3-1/16”3/8”

3/4” 7/8”

2-3/8”

1-1/4”

1-3/8” 1-1/2”

7/16”

1-7/16”

5/8”

2-3/16”

SFOP13

1”

1-5/8”

3/8”

5/8”

4-1/2”2”

3/4”

1-1/4”

1/2”

1-5/16”

1-5/8”

1/2”

1-3/8”

1-5/16”

2-9/16”1-3/8”

1/2”

SFOP16

SFOP11120

SFOP11121

14

ROCKWELL FLUSH BOLT

SPECIFICATIONS

Throw: 3/4”

Adjustment: 5/8” on Rod Length

Part No. Backset Rod Finish

SFFB1AL 1/8 10" Aluminum

SFFB1DU 1/8 10" Bronze





ROCKWELL HINGE REPLACEMENT KIT

Fits both Flush and 1/8” Recessed Doors

Adjustable with Ball Bearing and self lubricating Pin

Construction: Aluminum

Finishes: Anodized Aluminum and Anodized Bronze

Each Hinge kit contains 2 Hinges, 2 pcs of 1/8” thick shim Plates, 4 Screw Cover Plates, 12 pcs One Way Mounting Screws, One Hex Wrench and installation instructions.

For Doors with Cylinder height 34-37”

Part No. Finish

SFHK1AL Aluminum

SFHK1DU Bronze

ROCKWELL THRESHOLDTB4016

15

ROCKWELL SECURITY

SPECIFICATIONS

18040032 Series Surface Mounted Overhead Door Stops

18040032 Series Light to Medium DutySurface application for single acting doors

available in:

“S” –Stop only with shock absorbing spring and

“H” –Hold only (Special order)

“F” –Friction type (Special order)

For Doors: 18” - 40” wide x 1-3/8” - 1-3/4” thick

Track: Stainless Steel, 3/4” wide x 5/8” high x 0.059”

Slide: Wear resistant nylon for high loading and wear applications

Arm: Stainless Steel 0.0134” x 9/16”

Jamb Bracket: Stainless Steel 3/4” x 3”

Handing: Reversible/Non-handed

Spring Heavy: Heavy duty shock spring

Finishes: US32 and US32D (Other �nishes maybe available on special order)

Fasteners: Machine screws, through-bolts, wood screws

Fits: 36-1/16” to 42” wide doors, Up to 2-1/2” thick doors (Other door size options available by special order)

Features and Bene�ts

Stainless steel construction to withstand the

toughest environmental conditions

Non-handed (Reversible)

16

PRECISION BEARING COMMERCIAL GRADE ADJUSTABLE ROLLER

SPECIFICATIONS

GENERAL DESCRIPTION

Wheel size 1.5” diameter or 1-13/16” diameter

MATERIAL AND FINISH

Housing: Heavy gauge Stainless steel

Wheel: Stainless steel

Bearing and Race: Sealed Precision Bearing

Load Capacity: Up to 250 lbs.

Height Adjustment Range: Up to 0.77”

Adjustment Type: Ramped slot Screw driven

Certi�cation: Exceeds AAMA 906-96requirements for cycle life and load capacity

Precision Bearing end adjust heavy duty

commercia l grade tandem rol lers for

sliding glass doors. Heavy gauge housing

and sealed precision bearing wheels for

heavy load capacity. Height adjustment

mechanism can be operated with a Phillips

screwdriver. Mounting tabs and hole location

conform to general industry practice.

Part Number Wheel Size Wheel \ Case

5400925 1-1/2” Stainless

5433925 1-13/16” Stainless

17

ROCKWELL SECURITY-HEAVY DUTY 4 BAR HINGE

General Description

Rockwell Heavy Duty 4 Bar Hinge in stainless

steel to meet toughest coastal applications.

Rockwell Top Hung hinges have an adjustable

opening stop. Rockwell Side Hung hinges open

to about 90 degree for easy clean and egressed

functions.

Easy to install with an adjustable friction

mechanism to ensure smooth operation. Meets

US AAMA 904.1 standards.

General Description

TEST: Endurance tested to 10,000 cycles to

AAMA 904.1 standards

Technical Data for Heavy Duty Hinges

Top HungNormal

SizeOpening

AngleMax.Weigh

in lbs.Vent Max Height

HDFTH10 10”(259mm)

50˚ 58 lbs 20”

HDFTH12 12”(259mm)

50˚ 73 lbs 25 ”

HDFTH16 16”(412mm)

50˚ 99 lbs 40 ”

HDFTH22 22”(558mm)

45˚ 129 lbs 60”

HDFTH26 26”(558mm)

30˚ 234 lbs 80”

HDFTH26SB 26”(558mm)

15˚ 224 lbs 80”

Side HungNormal

SizeOpening

AngleMax.Weigh

in lbs.Vent Max Height

HDFSH10 10”(259mm)

85˚ 83 lbs 26”

HDFSH16 16”(412mm)

90˚ 103 lbs 33 ”

SPECIFICATIONS

18

STAINLESS STEEL SLIDING GLASS DOOR SYSTEM

SPECIFICATIONS

SR1000 Series

SLIDING GLASS DOOR KIT

2 x SR1000DRBS

Sliding Door Roller

Stainless Steel Construction

Glass Thickness: 10 - 12 mm

Maximum Glass Width: 36”

Maximum Weight: 80 Kg

2 x SR1000DSBS

Door Stop

2 x SR1000ECBS

End Cap

1 x SR1000TKBS

Track 25mm x 84”

1 x SR1000FGBS

Floor Guide

5 x SR1000WCBS

Wall Clamp

1 x SR1101RPBS

Recessed Pull


© Rockwell Security Inc. 2012

Barn Door Hardware

®

ROCKWELL SECURITY INC.

www.rockwellsecurityinc.com [email protected]

Barn Door HardwareSonoma System

®


Sonoma Barn Door Hardware

Load Capacity of Max 200 lbs per Door

Matt Black Finish

Precision Ball Bearing Rollers

Pre-drilled track with 16” Centers

Can be installed on either side

Anti-Jump design

Steel Flat Track 79" Length

Face Mount design

STANDOFF

ANTI-JUMP DISC

END STOP

C-GUIDE

J-HOOK / Hanger

SPACER

HEX Bolt, Washer & Nut

HEX HEAD LAG BOLT

TRACK

ALLEN WRENCH

5

2

2

1

2

1

4

5

1

1

Complete Kit Includes:

End Cap

Standoff Anti-Jump Disc Guide

Flat Track J-Hook Hanger

Barn Door Hardware

Napa Stainless Steel System

®


Napa Barn Door Hardware

Load Capacity of Max 200 lbs per Door

Stainless Steel Clear Finish

Precision Bearing Rollers

Pre-drilled track with 16” Centers

Can be installed on either side

Anti-Jump design

Stainless Steel Flat Track 79" Length

Top Mount design

STANDOFF

ANTI-JUMP DISC

END STOP

C-GUIDE

Stainless Steel Hanger

HEX HEAD LAG BOLT

TRACK

ALLEN WRENCH

5

2

2

1

2

1

5

1

Complete Kit Includes:

End Cap

Standoff Anti-Jump Disc Guide

Flat Track SS Hanger



SLIDING DOORHARDWARE

01

Contents

SLIDING DOOR HANDLES ( pages 02-06 )

02 A Standard Of Excellence

03 Charlotte

Aspen04 Sonoma

Cambridge

05 Euro-Charlotte

Euro-Cambridge

06 Euro-Aspen

Cylinder & Housing

SLIDING DOOR LOCKS ( pages 07-14 )

07 Rockwell Keystone

08 Keystone Dual Point Mortise Lock

09 Keystone Dual Point Mortise Lock - 7091 Series

10 Keystone Dual Point Mortise Lockset For Vinyl Door Applications

Keystone Dual Point Lock Keeper

11 Multipoint Mortise Deadlock For Sliding Door

12 Multipoint Mortise Badock

13 Single-Point Mortise Lock

14 Keystone Multipoint Mortise Deadlock

SLIDING DOOR ROLLERS ( pages 15-18 )

15 Tandem Rollers

16 Side-Adjust Tandem Roller 3900 Series

17 Side-Adjust Tandem Roller 3900 Series

18 End-Adjust Tandem Roller 5100 Series

02

SLIDING GLASS DOOR HANDLES

A standard of excellence

The Rockwell product line offers a wide variety of sliding door handles to fit all tastes and preferences of homeowners - from the economical Euro-Cambridge handle to the elegant Charlotte solid brass handle. All handles are designed to fit most crosshole boring practices. What's more, you may offer your customers the added security of a multipoint lock as all our handles work with multipoint locks.

CONSIDER•No change to Operations-3-15/16” mounting hole spacing conforms to general industry practice and will not require any change to your manufacturing process

•Multi-point security- all handles fit single and multi-point locks from Rockwell; Rockwell locks have a mishandling device to prevent door frame damage

•Key-alike convenience- homeowners have the option to key all doors alike with an optional universal keyway cylinder;locks may also be re-keyed

•Customize your application- all handles are compatible with all Rockwell exterior pulls and locks; available in keyed, non-keyed or privacy configurations

•Lower inventory costs- Non-handed design reduces SKUs and associated inventory issues.

•Available in popular finishes including PVD- All handles are available in various powder-coated colors; decorative finishes including the Rockwell Guard lifetime finish

•Aesthetic Distinction-Matching interior and exterior handles are available with most handle styles

03


SPECIFICATIONS

CHARLOTTE

ASPEN

MATERIAL AND FINISH High-pressure die-cast zinc with powder-coat finish in standard, and architectural plated finishes.

MOUNTING DIMENSIONS : Per general industry practice. CROSS-HOLE SPACING : 3-15/16” BACKSET : In-line or 1/8” offset DOOR THICKNESS : 1.75”

MATERIAL AND FINISH High-pressure diecast zinc with powder-coat finish in standard, and architectural plated finishes.


3.937 7.48

1.00

1.5351.909

2.705

2.5551.01

1.3981.949

3.937 7.52

Handle\ Finish Privacy Functionwithout Cylinder

Polished Brass 88060001Antique Brass 88060006

Brushed Chrome 88060002Pewter 88060007

Victorian Bronze 88060064


Cylinder & Housing

Polished Brass 5008800 5008801Antique Brass 5009937 5009985

Brushed Chrome 5009938 5009986Pewter 5009939 5009984White 5000803 5000782


White 88060011Black 88060014

Satin Nickel 88060003Polished Chrome 88060005

Oil Rubbed Bronze 88060004

04

Handle\ FinishPrivacy Function

without Cylinder

Entry Function w/ Cylinder

installedCameo 88070056 88079856White 88070051Tan 88070055 88079855

Black Chrome 88070038 88079838

Handle\ FinishActive handle

setw/ full Cylinder

Privacy handle setw/

thumb turnAntique Brass 88199805 88190005

Polished Chorme 88199806 88190006White 88199851 88190051Black 88199814 88190014

Polished Brass 88199831 88190031Satin Nickel 88199833 88190033


SPECIFICATIONS

SONOMA

CAMBRIDGE

MATERIAL AND FINISH High-pressuredie-cast zinc with powder-coat finish in standard, and architectural plated finishes.

MOUNTING DIMENSIONS : Per general industry practice. CROSS-HOLE SPACING : 3-15/16” BACKSET : In line or 1/8” offset DOOR THICKNESS : 1.45” or 1-3/4”


MOUNTING DIMENSIONS : Per general industry practice. CROSS-HOLE SPACING : 3-15/16” BACKSET : In-line or 1/8” offset ACTUATOR LOCATION : Centered or 3/4” offset DOOR THICKNESS : 1-3/4”

0.472”

0.551”

1.102”

3.937”

7.402”

1.024” 2.047”

3.946.54

2.56

1.01

1.91

05


SPECIFICATIONS

EURO-CHARLOTTE

EURO-CAMBRIDGE


MOUNTING DIMENSIONS Per general industry practice. CROSS-HOLE SPACING-3-15/16” BACKSET-In-line or 1/8” offset DOOR THICKNESS-1.75”



Handle\ Finish Privacy Function

Brushed Chrome 89060002White 89060011Black 89060014 Tan 89060015

Handle\ Finish Privacy Function

White 89070011

7.52

3.937

1.01

1.3981.949

7.362

0.886

1.34

2.56

3.94

6.54

1.91

1.01

7.362

0.886

1.34

06

7.362

3.937

7.48

1.00

1.34

0.886

1.535

1.909

3.937

2.56

1.29

0.75

1.89

7.224

9.301.00 7.362

1.34

0.886

24.5

Handle\ Finish Privacy FunctionBlack 82020014White 82020011

Handle\ Finish Cylinder &HousingPolished Brass 5008801Antique Brass 5009985

Brushed Chrome 5009986 Pewter 5009984White 5000782Black 50018114

Satin Nickel 50018103Polished Chrome 50018105

Oil Rubbed Bronze 50018104

Handle\ Finish Privacy FunctionBlack 89050014White 89050011

Brushed Chrome 89050002


SPECIFICATIONS

EURO-ASPEN

CYLINDER & HOUSING

MATERIAL AND FINISH High-pressure die-cast zinc with powder-coat finish in standard, and architectural plated finishes.MOUNTING DIMENSIONS Per general industry practice. ‧ CROSS-HOLE SPACING-3-15/16” ‧ BACKSET-In line or 1/8” offset

MATERIAL AND FINISH High-pressure die-cast zinc with powder-coat finish in standard, and architectural plated finishes.MOUNTING DIMENSIONS : Per general industry practice. ‧ CROSS-HOLE SPACING : 3-15/16” ‧ BACKSET : In-line or 1/8” offset

MATERIAL AND FINISH Zinc die cast housing solid brass cylinders.

07

DUAL POINT LOCK FOR AMERICAN SLIDING Glass Doors

Rockwell Keystone - DUAL POINT LOCK FOR AMERICAN SLIDING Glass Doors

The Rockwell Keystone dual point mortise lock is compatible with all Rockwell sliding Door handles. The Keystone has a built-in mishandling anti-slam in its collapsible hooks. Unlike other anti-slam locks in the market where the lock can only be operated when the door is engaged with the frame the Keystone dual point lock can be operated without engaging the door into the frame and can be slammed without causing any damage to the lock, the strike or the door. It also easily upgrades single point locks with very minor changes to the mortise.

The Keystone only requires a 45 degree turn to lock or unlock, a built in lock indicator with a compression hook.

Opposing hook orientation provides anti-l i ft security and laminated hooks ensur a load capacity of over 2,000 lbs. Available in All Stainless Steel for the toughest coastal applications.

The Keystone is available in flush mount, surface mount and recessed mount making it suitable for Vinyl, Clad, Fiberglass, Aluminum and Wood doors.

SPECIFICATIONSMATERIAL AND FINISH: 300 Series Stainless Steel or Heavy Gauge steel with zinc dichromate finish per ASTM-B633Load Capacity: Over 2,000 lbs.709 MORTISE LOCK—SURFACE MOUNT7092877 Steel70929878 Stainless Steel

08

0.287

0.283

0.894

0.126

1.002

1.307

8.701

7.756

3.064

0.472

0.748 0.5

1.5160.492

1.24

0.75

1.22

0.256

3.189

4.685

5.669

KEYSTONE DUAL POINT MORTISE LOCK

SPECIFICATIONS

Keystone Dual Point Mortise Lock

Industry standard specs

Minor change from standard single point rout

For use with all door construction materials

Available with recess adapte and faceplates

Tested to over 100,000 operating cycles

Load Capacity : over 2000 lbs

Material Part Number

Steel 70929877

Stainless 70929878

09


SPECIFICATIONS

Keystone Dual Point Mortise lock - 7091 series

Sliding door dual point lock for wood applications

Load capacity: over 2000 lbs

Keeper height 0.500” extendable to 1” overall height



Steel 70910877

Stainless 70910878

10


SPECIFICATIONS

SPECIFICATIONS

Keystone dual point Mortise Lockset for vinyl door applications

Keystone Dual point lock Keeper

Load : over 2000 lbs

Keeper height 0.500” extendable to 1” overall height


Colled rolled steel

Tested to over 2,000 Ibs

For use with all door construction materials


Steel 70938877

Stainless 70938878


Steel 71900890

11

SINGLE-POINT MORTISE LOCK

SPECIFICATIONS

MATERIAL AND FINISH-

Heavy gauge steel with zinc dichromate finish per ASTM-B633 or 300-series stainless steel

LOAD CAPACITY : Over 800 lbs.

HOOK ADJUSTMENT : Hook adjustment can be made after installation

MOUNTING HOLE LOCATIONS : Per industry practice

CROSS-HOLE SPACING : 3-15/16”

KEY BACKSET : In-line or 1/8” offset

ACTUATOR LOCATION : Center or 3/4” offset

OPTION-Available with recess adapters and face-plates preinstalled


Steel 50000876

Stainless 50000878

500 MORTISE LOCK

Industry standard size•For use with all door construction materialsAvailable with recess adapters and faceplatesAvailable with mounting screws

Reliable performanceLong the standard of locking systems for sliding glass doors, the single-point mortise locks stood the test of time. This reliable lock isconstructed of heavy gauge metal—dichromated steel or stainless steel—and laminated hook.Installation is made easy with the adjustable hook and the anti-slam design will prevent dam-age to the door. Rockwell offers several models to fit your specific door preparation practice.

General descriptionSingle-point mortise lock for sliding glassdoors. Heavy gauge construction in zinc-dichromate steel or 300-series stainless steel.Mounting dimensions conform to general industry practice. All locks are compatible with all sliding door handles. Suitable for wood,vinyl, or aluminum doors.

14

KEYSTONE MULTIPOINT MORTISE DEADLOCK

SPECIFICATIONS

2600 KEEPER

2PT077/078—KEEPER HEIGHT ADJUSTOR

Keeper for use with 780 series multi-point applications

Made of cold rolled steel

Tested to 2000 lbs.

For use with all door construction

Keeper height adjustment for use with slidingdoor multipoint point mortise lock

Packer And shim all in 0.125” increments

Made of nylon 6

500 Series keeper for 5000876/5000877 single point sliding door mortise lock

A Finish PartNumber

0.5” Zinc-plated 26000099

0.5” Stainless Steel 7800892

0.625" Stainless Steel 26126524

0.625" Steel 26116598

Product Part Number

Packer 2PT077

Shim 2PT078

Color Part Number

Zinc-plated 5000814

4.222

1.5951.0311.595

.357

.440

.607

15

TANDEM ROLLERS

Quality you can feel

Rockwell tandem rollers are built to provide you and your customer a long, trouble-free service life. The quality and workmanship of your doors will become tangible to homeowners from the smooth and effortless operation provided by our packed-race ball-bearing construction—even on your heaviest doors. These rollers may be easily installed with routing and mounting hole locations designed according to general industry practice, while our many optional mounting tabs can accommodate your specific profile and mounting requirements. Rollers are available in side-adjust or end adjust configurations to suit your preference.

CONSIDER•No change to Operations- mounting holelocation and routing detail conform to general industry practice and will not require any change in your manufacturing

•Tangible quality- users will notice the smoothrolling action pro-vided by our packed hardened-race ball-bearing construction

•Rated for your heaviest door- heavy gaugeconstruction sup-ports doors up to 400 lbs (using two rollers)

Customize to your door profile- many optional mounting tabs are available to meet your specific requirements; custom wheel and mounting tabs are available

Easy adjustment under full load- our tandem rollers design provide easy height adjustment using a screwdriver even under full load preparation

Superior corrosion protection- zinc dichromate finish pro-vides unsurpassed corrosion protection and stainless steel is available for your toughest applications

Tested performance- all Rockwell rollers exceed AAMA 906-96 requirements

16

SIDE-ADJUST TANDEM ROLLER3900 SERIES

SPECIFICATIONS

GENERAL DESCRIPTION

Side-adjust tandem roller for sliding glass doors. Heavy gauge housing and hardened ball bearing construction for heavy load capacity. Faceted cam height adjustment mechanism can be operated with a flat screwdriver from either side. Mounting tabs and hole location conform to general industry practice. Optional mounting tabs available for specific profile and mounting requirements.

MATERIAL AND FINISH HOUSING : Heavy gauge steel with zinc dichromate finish per ASTM-B633 or 300-series stainless steel

WHEEL : Cold rolled steel with zinc dichromate finish per ASTM-B633, 300-series stainless steel, or Nylon

BEARING AND RACE : Hardened steel or stainless steel, packed-race construction

LOAD CAPACITY : Up to 200 lbs. per roller

HEIGHT ADJUSTMENT RANGE : Up to .312 in

ADJUSTMENT TYPE : Faceted cam

CERTIFICATION : Exceeds AAMA 906-96 requirements for cycle life and load capacity

WHEEL \ CASE PART NUMBER

Satinless 5000925

steel 5000924

R0.125

0.718

0.438 DIA MIN HOLESIZE TO ACCESSADJUSTMENT SCREWS

1.161

0.183 MIN0.493 MAX

4.65

0.452

1-1/4 DIA

5.75

6.24

17

SIDE-ADJUST TANDEM ROLLER3900 SERIES

SPECIFICATIONS

GENERAL DESCRIPTION

Side-adjust tandem roller for sliding glass doors. Heavy gauge housing and hardened ballbearing construction for heavy load capacity. Wedge-type height adjustment mechanism can be operated with a Phillips head screwdriver from one side. Mounting tabs and hole location conform to general industry practice. Optional mounting styles available for specific profile and mounting requirements.

MATERIAL AND FINISH HOUSING : Heavy gauge steel with zinc dichromate finish per ASTM-B633 or 300-series stainless steel

WHEEL : Cold rolled steel with zinc dichromate finish per ASTM-B633, 300-series stainless steel, or Nylon

BEARING AND RACE : Hardened steel or stainless steel, packed-race construction

LOAD CAPACITY : Up to 200 lbs. per roller

HEIGHT ADJUSTMENT RANGE : Up to .406 in

ADJUSTMENT TYPE : Wedge, screw driven

MOUNTING : Per general industry practice, Optional mounting styles (not shown) available for specific applications

CERTIFICATION : Exceeds AAMA 906-96 requirements for cycle life and load capacity

WHEEL \ CASE PART NUMBER

steel 5300924

Satinless 5300925

4.67

1-1/2 DIA

5.75

6.17

0.244 MIN0.650 MAX

0.520

1.161

0.622 MINIMUM HOLESIZE TO ACCESSADJUSTING SCREW

R0.125 0.74

18

4.67

1-1/2 DIA

5.75

6.17

0.244 MIN0.650 MAX

0.520

1.161

0.622 MINIMUM HOLESIZE TO ACCESSADJUSTING SCREW

R0.125 0.74

END-ADJUST TANDEM ROLLER 5100 SERIES

PRECISION BEARING COMMERCIAL GRADE ADJUSTABLE ROLLER

SPECIFICATIONS

5102 END ADJUST ROLLER

GENERAL DESCRIPTION

Wheel size 1.5” diameter or 1-13/16” diameter

Notched to accommodate weld spatter in vinyl applicationsUtilizes 1/4-20 screw for mountingLoad rated to 125 lbs per rollerAvailable with other wheel sizes and materials

MATERIAL AND FINISH HOUSING : Heavy gauge Stainless steel WHEEL : Stainless steel BEARING AND RACE : Sealed Precision Bearing

LOAD CAPACITY : Up to 250 lbs.

HEIGHT ADJUSTMENT RANGE : Up to 0.77”

ADJUSTMENT TYPE : Ramped slot Screw drivenC

ERTIFICATION : Exceeds AAMA 906-96 requirements for cycle life and load capacity

Precision Bearing end adjust heavy duty commercial grade tandem rollers for sliding glass doors. Heavy gauge housing and sealed precision bearing wheels for heavy load capacity. Height adjustment mechanism can be operated with a philipps screwdriver. Mounting tabs and hole location conform to general industry practice.

WHEEL \ CASE PART NUMBER steel 5102924

Satinless 5102925

WHEEL \ CASE Wheel Size PART NUMBER Stainless 1-1/2” 5400925Stainless 1-13/16” 5433925

0.693

Ø1.25

0.20

R0.125

0.315

1.3 MIN1.74 MAX

1.0240.788

4.37 MAX

3.17

1.000.88



WHEEL SIZE:WHEEL SIZE:

MATERIAL:

Rockwell - SOLID BRASS WINDOW SASH PULLEY WITH PRECESSION BEARING WHEELS

R

GENERAL DESCRIPTION-

The Sash Pulley is manufactured of Solid Brass

Housing with a precision sealed bearing solid

SPECIF ICASPECIF ICA TIONSTIONS

• Solid Brass

brass wheel.

Available with a 2-5/8” or 2-7/8” wheel size.

Over 1000 lbs working load capacity.

MATERIAL:

WHEEL:• Solid BrassWHEEL:

• 2-5/8” or 2-7/8”

BEARING:• Precision Sealed Ball BearingsBEARING:

Part No. Wheel Size Wheel Type

11123001 Chain Driven 2-5/8”

11123002 Wire Driven 2-5/8”

11123003 Chain Driven 2-7/8”

11123004 Wire Driven 2-7/8”

Chain Driven or Wire Rope Driven

Wheel Groove Option1.250”

5.75

0”

4.50

0”

0.500”0.500”

2.97

1”

0.200”

0.96

8”3.

814”

1.90

7”

2.000”

2011.3

FULL MORTISE

FULL MORTISE

2011.3

2011.3

2011.3

03 04

ROCKWELL INLINE LADDER PULLS

SPECIFICATIONS

SPECIFICATIONS

Rockwell Inline Ladder Puills are constructed of Stainless Steel with a 1-1/4” diameter.

The Ladder Pulls include through bolts for installation on either 3/8” - 3/4” thick tempered Glass doors or 1-3/4” thick Aluminum,Wood or Fiberglass Doors. The Ladder Pulls also include metal washers and gaskets for installation.

Rockwell Slimline exit devices are suitable for all doors including narrow stile doors with a minimum 2” mounting surface. Rim Cylinder included for keyed entry.

Grade - ANSI A156.3 Grade 2Warranty - 10 years

ROCKWELL SLIMLINE PANIC EXIT DEVICES

Fits 3/8” - 3/4” thick Glass Doors or 1-3/4” thick Doors.

Diameter: 1-1/4”

Material: Stainless Steel

Glass Fabrication: 2 x 5/8” diameter holes

Projection: 3”

Clearance: 1-3/4”

Slimline fits 2” narrow aluminum door stiles


CYLINDER: SC1 Keyway

Underwriters' Laboratories Inc. Listed - 3 hour Fire Rating

HANDING: Non-handed and reversible

Latch bolt : 5/8” Throw

DOGGING: Hex Key dogging

DOORWIDTH: 36” Standard

FINISHES: Aluminum and Duronodic

SLIMLINE CONCEALED VERTICAL ROD

Rockwell Slimline “Concealed Vertical Rode exit devices

are for all doors including 2” narrow door stiles.


Warranty - 10 years

Part No. OverallLength

MountingCTC Finish

SFSLP60BS 60" 48" BrushedStainless


SFEDSL36AL Fire Rated $OXPLQXPbb

6)('6/��'8bbbb Fire Rated Bronze

6)('697%$566b Fire Rated b6WDLQOHVV�Steel

1-1/4”

3.0"

48"

60"



MULTIPOINT LOCKS& TRIM SETS

Contents

MULTIPOINT LOCKS & TRIM SETS

02 INTRODUCTION

03 ROCKWELL TL10 TRIPLE LATCH MULTIPOINT LOCK FOR AMERICAN ENTRY DOORS - 2-3/4” BACKSET

04 ROCKWELL XL22 TRIPLE LATCH MULTIPOINT LOCK FOR AMERICAN ENTRY DOORS - 2-3/8” BACKSET

05 ROCKWELL ST3 DEADLOCKING TONGUE MULTIPOINT LOCK FOR AMERICAN ENTRY DOORS - 2-3/8” BACKSET

06 ROCKWELL THUNDERBOLT SHOOTBOLT MULTIPOINT LOCK - 2-3/8” BACKSET

01

07 ROCKWELL TIMES SQUARE MULTIPOINT HANDLE SET WITH DELTA LEVER HANDLE

08 ROCKWELL VERANO MULTIPOINT TRIM WITH DAHLI LEVER HANDLE

09 ROCKWELL VERANO MULTIPOINT TRIM WITH BOURNE LEVER HANDLE

10 ROCKWELL VERANO MULTIPOINT TRIM WITH QUATTRO LEVER HANDLE

11 ROCKWELL VERANO MULTIPOINT TRIM WITH CHELSEA LEVER HANDLE

12 ROCKWELL MONACO MULTIPOINT TRIM WITH CHELSEA LEVER HANDLE

13 ROCKWELL MONACO MULTIPOINT TRIM WITH BOURNE LEVER HANDLE

14 KEYNETIC KEYPAD MULTIPOINT DEADBOLT AND TRIM SET

15 ROCKWELL SAVOY MULTIPOINT HANDLE SET

16 ROCKWELL SAN JOSE MULTIPOINT HANDLE SET

17

ROCKWELL MONDRIAN MULTIPOINT HANDLE SET 18

ROCKWELL WINDSOR MULTIPOINT HANDLE SET

ROCKWELL CONTEMPORARY AND OLD WORLD MULTIPOINT HANDLE SETS

ROCKWELL BUILDERS GRADE MULTIPOINT TRIM SETS

ROCKWELL STRIKE PLATES, KEY BLANKS

ADJUSTABLE HINGES AND STRIKE PLATE

CONSTRUCTION HANDLE AND ACCESSORIES

ROCKWELL YORKSHIRE NARROW STYLE MULTIPOINT LOCK

ROCKWELL EUROLUX NARROW STYLE MULTIPOINT LOCK

ROCKWELL NARROW STYLE MULTIPOINT LOCK HANDLE SETS

ROCKWELL NARROW STYLE MULTIPOINT LOCK HANDLE SETS

ROCKWELL EURO PROFILE CYLINDERS

19

20

21

22

23

24

25

26

27

28

29

30

ROCKWELL SECTIONAL SAPPHIRE MULTIPOINT HANDLE SETS

ROCKWELL SECTIONAL SAPPHIRE MULTIPOINT HANDLE SETS

MULTIPOINT LOCKS, HANDLES AND ACCESSORIES

SECURITY THEY ASK FOR

The Rockwell locksets are designed for discerning

homeowners loaded with features they increasingly

seek, like the peace of mind afforded by a multipoint

locking system with options to fit their security and

aesthetic preferences. We’ve made it easy to offer

these benefits as the Rockwell locksets are compatible

with standard mounting hole locations and are an ex-

ceptional value. What’s more, our precision engineered

mechanisms will provide years of trouble-free service.

02

CONSIDER

•Greater customer appeal - homeowners want the

security and comfort afforded by multipoint hardware.

•High strength- heavy gauge construction with

maximum security options, precision engineered

mechanism provides better structural performance.

•Superior corrosion protection- zinc dichromate steel

finish provides unsurpassed protection and stainless

steel is available for your toughest applications.

•Options to suit any style- works with wood, fiberglass,

vinyl, or aluminum doors matched with complementary

Rockwell trim sets.

•Simple manufacturing conversion- compatible

with industry standard 5-1/2” CTC double bore hole

locations. Minor changes to door preparation.

•Economical- delivering exceptional value for money.

•Easy installation, fewer service calls- easy to handle,

one piece construction multipoint locks increases

manufacturing efficiencies.

•Greater reliability and durability- quality built into

the product to last a lifetime.

2.0

41

"[5

1.8

mm

]

7.0

00

" [

17

7.8

mm

]

ROCKWELL TL10 MULTIPOINT LOCKFOR AMERICAN ENTRY DOORS

7010 Series - 2-3/4” Backset

Rockwell TL10 multipoint lock with triple latch built

for entry doors.

SPECIFICATIONS

Part

Number

Panel

Size

Top Latch

Location

Overall

Length

70108768 6’8” 35.875” 73.094”

70108780 8’0” 51.875” 89.094”

BA

CK

SE

T2

-3/4

”[6

9.9

mm

]

3.6

48

" [

92

.7m

m]

3.7

80

" [

96

.0m

m]

9.4

49

" [

24

0.0

mm

]

30

.21

9"

[76

7.6

mm

] 23

.21

9"

[58

9.8

mm

]7

.00

0"

[1

77

.8m

m]

OV

ER

ALL

LE

NG

TH

0.7

87

" [

20

.0m

m]

1.0

00

"[2

5.4

mm

]

6.09

4" [

154.

8mm

]

03

Automatic independent triple latching points.

Laminated steel, Anti-saw, anti-jemmy and kick

resistant center deadbolt for maximum security.

90 degree consumer friendly easy locking operation.

Visual lock indicator feature.

Adjustable strike plates allow for field adjustment.

MATERIAL AND FINISH :

Heavy gauge steel construction with coated faceplate

BACKSET : 2-3/4”

HOLE CENTER : 5.5” center to center

DEADBOLT : 1“ wide x 1” throw Laminated Steel

with anti-saw, Anti-jemmy and kick resistant feature.

Americanized 90 degree turn

LATCH : 1/2” throw, 45 degree turn

FACEPLATE : 0.787” wide (20mm) Euro-groove

application

CYCLE TESTING : Tested to over 100,000 cycles

TOP

LA

TCH

LO

CA

TIO

N

Fits standard double bore with 5.5” hole centers

and 2-1/8” bore.

Precision engineered components for a smooth and

reliable operation.

One piece construction maintains door panel integrity

while ensuring a simple, trouble free and easy

installation.

Field reversible with a screwdriver.

ROCKWELL XL22 MULTIPOINT LOCK FOR AMERICAN ENTRY DOORS

7222 Series - 2 -3/8” Backset

Rockwell XL22 multipoint lock with triple latch2.

041”

51.8

mm

One Piece Construction maintains door panel

integrity while ensuring a simple, trouble free

and easy installation.

Automatic independent triple latching points.

04

SPECIFICATIONS

Part

Number

Panel

Size

Top Latch

Location

Overall

Length

72228768 6’8” 32.375” 66.594”

72228780 8’0” 45.500” 79.724”



BACKSET : 2-3/8”


DEADBOLT : 1“ wide x 1” throw Laminated steel




application


Laminated Steel, Anti-saw, anti-jemmy and

kick resistant center deadbolt for maximum security.

Visual lock indicator feature

Fits standard double bore with 5.5” hole centers

and 2-1/8” bore.


Precision engineered components for a smooth

and reliable operation


OV

ER

ALL

LE

NG

TH

5.12

2”13

0.1m

m

0.78

7”20

.0m

m

25.4mm

3.758”95.5mm

28.3

41”

719.

9mm

9.44

9”24

0.0m

m 6.09

5”15

4.8m

m

BACKSET2-3/8”

60.3mm

1.0”

TOP

LA

TCH

LO

CA

TIO

N

3.78

0”96

.0m

m

5.87

8”14

9.3m

m


ROCKWELL ST3 MULTIPOINT LOCK FOR AMERICAN ENTRY DOORS

7322 Series, 7311 Series - 2-3/8” Backset

Rockwell ST multipoint lock with deadlocking tongues

are built to work with Rockwell traditional grip handle

sets and standard lever sets.


reliable operation.


SPECIFICATIONS

Part

NumberMaterial

Panel

Size

Tongue

Location

Top Latch

Location

73228768 Steel 6’8” 19.443” 32.555”

73228780 Steel 8’0” 22.318” 45.680”

73118868Stainless

Steel6’8” 19.443” 32.555”

73118880Stainless

Steel8’0” 22.318” 45.680”



or Stainless Steel for coastal applications.

BACKSET : 2-3/8”


DEADBOLT : 1” Wide x 1“ throw Laminated Steel



FACEPLATE : 0.787” wide (20mm) Eurogroove

application


OVERALL LENGTH : 6’8” - 66.594”

8’0” - 79.724”

Fits standard double bore with 5.5” hole centers and

2-1/8” bore.

05

Laminated Steel, anti-saw, anti-jemmy and kick resistant

center deadbolt for maximum security.


25.4mm1.00”

OV

ER

ALL

LE

NG

TH


One piece construction maintains door panel integrity

while ensuring a simple, trouble free and easy installation

Visual lock indicator feature.

ROCKWELL THUNDERBOLT SB6MULTIPOINT DOOR LOCK

7360 Series - 2 -3/8” Backset

Rockwell Thunder Bolt Multipoint Lock with deadlocking

shootbolts top and bottom.

1" Deep Throw Triple Laminated Steel Shootbolts provide

additional security against forced entry

1.00

"

SPECIFICATIONS

Part

NumberDescription Overall

Length

73601035 Lock Body Center Module

73600066 Top Extension piece 76.813”

06


Heavy gauge steel construction with a coated faceplate

BACKSET : 2-3/8”


HANDLE HEIGHT : 35”

DEADBOLT : 1” wide x 1“ throw laminated deadbolt with

anti-saw, anti-jemmy and kick resistant feature

LATCH : 1/2” throw, short rotation turn


application


Lever actuated Multipoint lock to provide maximum

compression and sealing between the door and frame.

2 piece construction allows for an easy installation while

maintaining door panel integrity.

Laminated steel, anti-saw, anti-jemmy and Kick resistant

center deadbolt for maximum security

Visual lock indicator with single point locking and

multipoint locking option.

Non-handed anti-slam feature.

Fits Standard 5-1/2" double bore with 2-1/8" hole.



reliable operation.


73600068 Top Extension piece 79”

73600069 Top Extension piece 79- 1/4”

73600080 Top Extension piece 95”

73600081 Top Extension piece 95 -1/4”

3.76"

1.00"

35" H

AN

DLE

HE

IGH

T

31.6

5"9.

45"

2-3/8" Backset

37.9

1"

OV

ER

ALL

LE

NG

TH1.

00"

.78"

PREMIUM ROCKWELL TIMES SQUARE MULTIPOINT LOCK DOOR HANDLE SET WITH DELTA LEVER

SPECIFICATIONS

07

MATERIAL: Solid Brass Drop Forged construction

for precision, strength and long lasting durability

SIZE: 11” x 2 - 1/2” Escutcheon Plate covers 2-1/8”

cylindrical cutout.

CYLINDER : Anti-bump, and Anti-pick 5 pin SC1

Keyway, pin depths and increments.

KEY: 1-1/4“ Wide bow Solid Brass keys

DOOR THICKNESS : 1-3/4”; Conversion Kits

available for 2-1/4” thick doors

Individually Spring Loaded Levers

FUNCTION : Residential Single Cylinder Multipoint

lock door Handle

HANDING : Non-handed Reversible Levers

2.5" (63.5mm)

11.2

" (28

4mm

)

Part Number Finish

H433MPDLUS15 Brushed Nickel

H433MPDLUS10B Oil Rubbed Bronze

PREMIUM ROCKWELL VERANOMULTIPOINT LOCK TRIMWITH DAHLI LEVER HANDLE

SPECIFICATIONS

08

284.

1 [1

1.2"

]

63.5 [2.5"]

Part Number Finish

H432MPMLUS15 Brushed Nickel

H432MPMLUS10B Oil Rubbed Bronze

MATERIAL: Solid Brass Drop Forged Construction


SIZE: 11” x 2 - 1/2” Escutcheon Plate. Covers 2-1/8”

cylindrical cutout.

CYLINDER : Anti-bump, Anti-pick, 5 pin SC1


KEY : 1-1/4“ Solid Brass Nickel Plated Wide bow keys

DOOR THICKNESS : 1-3/4”; Conversion Kits for 2-1/4”

thick doors are available.


lock door Handle

HANDING : Non-Handed Reversible Levers

PREMIUM ROCKWELL VERANOMULTIPOINT LOCK TRIMWITH BOURNE LEVER HANDLE

SPECIFICATIONS

09

Part Number Finish

H432MPBLUS15 Brushed Nickel

H432MPBLUS10B Oil Rubbed Bronze

H432MPBLDN Distressed Nickel

284.

1 [1

1.2"

]

63.5 [2.5"]




cylindrical cutout.







lock door Handle


PREMIUM ROCKWELL VERANOMULTIPOINT LOCK TRIM WITH QUATTRO LEVER HANDLE

SPECIFICATIONS

10

Part Number Finish

H432MPDQUS15 Brushed Nickel

H432MPDQUS10B Oil Rubbed Bronze

H432MPDQDN Distressed Nickel

284.

1 [1

1"]

63.5 [2.5"]




cylindrical cutout.







lock door Handle


PREMIUM ROCKWELL VERANO MULTIPOINT TRIM WITH CHELSEA

SPECIFICATIONS

11

Part Number Finish

H432MPCLUS15 Brushed Nickel

H432MPCLUS10B Oil Rubbed Bronze

H432MPCLDN Distressed Nickel

284.

12 [1

1"]

63.5 [2.5"]



SIZE: 11” x 2 - 1/2” Escutcheon Plate.



KEY : 1-1/4“ Solid Brass Wide bow KEYS.

Covers 2-1/8” cylindrical cutout.




lock door Handle


LEVER HANDLE

SPECIFICATIONS

PREMIUM SAPPHIRE MONACOFULL ESCUTCHEON MULTIPOINT TRIMWITH CHELSEA LEVER DOOR HANDLE

12

MATERIAL: Solid Brass Drop Forged construction.

SIZE: 9” x 2 - 1/2” Trim Plate. Covers 2-1/8“ Cutout.

CYLINDER : Anti-bump, anti-pick, 5 pin SC1 Keyway,

pin depths and increments.

KEY: 1-1/4” Wide bow Solid Brass keys

DOOR THICKNESS: 1-3/4”; 2-1/4” C Kits available.

FUNCTION : Residential Single Cylinder Multipoint lock

door Handle


Part Number Finish

H401CLUS15 Brushed Nickel

H401CL10B Oil Rubbed Bronze

H401CLDN Distressed Nickel

H401CLWH White

H401CLPVDUS3 Lifetime Brass

H401CLPVDUS15 Lifetime Brushed Nickel

2.5" 63.5mm

9" 2

28.6

mm

9" 2

28.6

mm

PREMIUM SAPPHIRE MONACO FULLESCUTCHEON MULTIPOINT TRIMWITH BOURNE LEVER DOOR HANDLE

SPECIFICATIONS

MATERIAL: Solid Brass Drop Forged Construction.

SIZE : 9" x 2 -1/2” Trim Plate. Covers 2-1/8” cutout.



KEY : 1-1/4“ Wide Bow Solid Brass keys

DOOR THICKNESS: 1-3/4”, 2-1/4” C Kits available.

FUNCTION : Residential Single Cylinder Multipoint lock

door Handle

HANDING: Non-Handed Reversible Levers

13

Part Number Finish

H401BLUS15 Brushed Nickel

H401BL10B Oil Rubbed Bronze

H401BLDN Distressed Nickel

H401BLPVDUS3 Lifetime Brass

2.5" 63.5mm

Keynetic KEYPAD DEADBOLT

Keynetic Keypad Deadbolt With Remote Control

PART NO. Finish

75000001 Brass

75000003 Brushed Nickel

75000004 Oil Rubbed Bronze

PART NO. Finish


Note: Keynetic Keypad Deadbolt is for use with

the 7010 and 7222 series Multipoint locks only.

PART NO. Finish

GLM10-US15 Brushed Nickel

GLM10-10B Oil Rubbed Bronze

GLM10-US3 Brass

KEYNETIC KEYPAD MULTIPOINTDEADBOLT AND LEVER TRIM SET

14

One Touch Locking Multipoint lockset.

The Keynetic Digital keypad allows you to lock

your door with the press of one button and

unlock your door with a 4 digit user code.

Innovative and Intuitive design, with a manual

key override. Easy to operate and program.

The keypad also has a programmable

relocking feature which would allow you to

relock your door without touching the lockset.

Easy to install without any hard wiring.

Keypad is also illuminated and comes standard

with visual and audio indicators. Remote Key

FOB is also available

Security they ask for

PREMIUM ROCKWELL SAVOYMULTIPOINT LOCK DOOR HANDLE SET

SPECIFICATIONS


for precision, strength and long lasting durability.

Individually spring loaded function

Cylinder : Anti-bump and anti-pick, 5 pin SC1

Keyway, pin depths and increments

KEYS: 1-1/4”Wide Bow Solid Brass Keys

DOOR THICKNESS : 1-3/4”; 2-1/4” Kits available.

HANDING : Non-Handed Kit


lock door handle for use with 7322 and 7311 series

Multipoint locks.

Part Number Finish

H303MPCLUS15 Brushed Nickel

H303MPCL10B Oil Rubbed Bronze


H303MPCLUS3 Lifetime Brass

H300MPMWH White

3.937

5.000

4.000

2.750

5.500

7.594

2.750

2.750

Finish

Brushed Nickel

Brass

Oil Rubbed Bronze15

Part Number

HDMK03

HDMK71

HDMK10B

Dummy mounting kits for Double Door

PREMIUM ROCKWELL SAN JOSE

SPECIFICATIONS

MULTIPOINT LOCK DOOR HANDLE SETS

16

Part Number Finish

H600MPMUS15 Brushed Nickel

H600MPMUS10B Oil Rubbed Bronze

H600MPMDN Distressed Nickel

3.500

2.500

2.500

5.500

3.296

11.1865.500

7.667

4.008

SAN JOSE HANDLE SET DUMMY MOUNTING KIT

Part Number Finish

HDMKAIWUS15 Brushed Nickel

HDMKAIWUS10B Oil Rubbed Bronze

HDMKAIWDN Distressed Nickel











Multipoint locks.

PREMIUM MONDRIAN ROCKWELLMULTIPOINT LOCK DOOR HANDLE SET

SPECIFICATIONS

Part Number Finish

H200MPMCLUS15 Brushed Nickel

H200MPMCLUS10B Oil Rubbed Bronze

H200MPMCLPVDUS3 Lifetime Brass

MONDRIAN HANDLE SET DUMMY MOUNTING KIT

Part Number Finish

HDMK03 Brushed Nickel

HDMK10B Oil Rubbed Bronze

HDMK71 Brass17











Multipoint locks.

3.031

10.8275.500

7.594

SPECIFICATIONS

PREMIUM WINDSOR ROCKWELL MULTIPOINT LOCK DOOR HANDLE SET

18

WINDSOR HANDLE SET DUMMY MOUNTING KIT

Part Number Finish

HDMK03 Brushed Nickel

HDMK10B Oil Rubbed Bronze

HDMK71 Brass

Part Number Finish

H100MPCLS15 Brushed Nickel

H100MPCL10B Oil Rubbed Bronze


H100MPCLPVDUS3 Brass











Multipoint locks.

ROCKWELL SOLID BRASS SECTIONALDEADBOLT AND LEVER MULTIPOINT

SPECIFICATIONS

CHELSEA LEVER

Sapphire Drop Forged Solid Brass

Deadbolts

Traditional style low profile deadbolt

CYLINDER: Anti-bump, anti-pick, 5 pin SC1 keyway,

pins and increments.

KEYS : 1-1/4” Wide bow Solid Brass Keys

DOOR THICKNESS: 1-3/4”; 2-1/4” C Kits available.

19

Part Number Finish

DB20-US15 Brushed Nickel

DB20-US10B Oil Rubbed Bronze

DB20-PVDUS3 Brass

DB20-WH White

Concealed screws.

Individually spring loaded levers to prevent handle sag.

Non-Handed.

Short rotation lever trims


Part Number Finish

LCM-1510-US15 Brushed Nickel

LCM-1510-US10B Oil Rubbed Bronze

LCM-1510-PVD Brass

LCM-1510-WH White


Lever Multipoint Door Handle set

HANDLE SET

SOLID BRASS SECTIONAL DEADBOLT

SPECIFICATIONS

AND LEVER MULTIPOINT DOOR HANDLE


Lever Trim SetsBOURNE LEVER

20

Concealed Screws

Individually spring loaded levers to prevent handle sag.

Non-Handed.


BOURNE LEVER TRIM

Part Number Finish

LBM-1510-US15 Brushed Nickel

LBM-1510-US10B Oil Rubbed Bronze

LBM-1510-PVD Brass

NORWICH LEVER TRIM

Part Number Finish

LNM-1510-US15 Brushed Nickel

LNM-1510-US10B Oil Rubbed Bronze

LNM-1510-PVD Brass

NORWICH LEVER

DAHLI LEVER

CHELSEA LEVER

DAHLI LEVER TRIM

Part Number Finish

LMM-1510-US15 Brushed Nickel

LMM-1510-US10B Oil Rubbed Bronze

LMM-1510-PVD Brass

461MPC - US10B

PREMIUM CONTEMPORARY AND OLD WORLD SECTIONAL MULTIPOINTDOOR HANDLE SET

805MPC - DVB

21

SPECIFICATIONS

Low Profile deadbolt with cylinder cover coupled with

individually spring loaded levers to prevent handle sag.

Non-handed.



Easy to install.

TRIM PLATES : Cover 2-1/8” cylindrical cutout.

DOOR THICKNESS : 1.75”; 2-1/4” C Kits available.

Drop Forged Solid Brass Multipoint

Lock Deadbolts

Part Number Finish

461MPC - US10B Oil Rubbed Bronze

250MPC - DVB Victorian Bronze

760MPC - DN Distressed Nickel

Traditional style low profile deadbolt

CYLINDER : Anti-bump, anti-pick 5 pin SC1 keyway,


KEYS : 1-1/4” Wide bow Solid Brass keys

Part Number

802MPC - US10B Oil Rubbed Bronze

805MPC - DVB Distressed Bronze

801MPC - DN Distressed Nickel

Finish

Drop Forged Solid Brass Lever

Multipoint door handles

Individually spring loaded levers prevent handle sag.

Non-Handed


250MPC - DVB

801MPN - DN

760MPC - DN

802MPC - US10B

BUILDERS GRADE SECTIONAL

SPECIFICATIONS

DEADBOLT AND LEVER MULTIPOINT LOCK HANDLE SET

D180 Series

22

Contemporary style deadbolt and individually spring

loaded levers to prevent handle sag.

Fully reversible lever handles.

CYLINDER : 5 pin SC1 Keyway, pin depths and increments.

Short rotation lever trim facilitates ease of operation.

Easy to install.


DOOR THICKNESS : 1-3/4”

Builders Lever Trim Set

Part Number Finish

GLM10-US15 Brushed Nickel

GLM10-10B Oil Rubbed Bronze

GLM10-US3 Brass

Builders Deadbolts

Part Number Finish

D180-US15 Brushed Nickel

D180-US10B Oil Rubbed Bronze

D180-US3 Brass

GLM10 Series

ADJUSTABLE CENTER STRIKE PLATE

2334 Series

SHOOTBOLT DOUBLE DOOR STRIKE PLATE WITH MATCHING MOUNTING SCREWS

2333 Series

23

Part Number

7010MPSSC

3" Strike Plate Screws

Part Number Finish

23340004

23340001

23340003

Oil Rubbed Bronze

Brass

Brushed Nickel

Part Number Finish

2332SC10B

2332SCUS3

2332SCUS15

Oil Rubbed Bronze

Brass

Brushed Nickel

1-1/2” MP Lock Mounting Screws

Part Number Finish

23330004

23330001

23330003

Oil Rubbed Bronze

Brass

Brushed Nickel

Solid Brass Nickel Plated Keyblank

Wide Bow Key

SC1 Keyway

Part Number Finish

EROKBSC NICKEL PLATED

ROCKWELL WIDE BOW KEY BLANKS

ADJUSTABLE STRIKE PLATE

LIFT-OFF ADJUSTABLE DOOR HINGE

1220 Series

2332 Series

24

Part Number Finish

23320001

23320003

23320004

233200DN

23321178

Brass

Brushed Nickel

Oil Rubbed Bronze

Distressed Nickel

Stainless Steel

2319 Series - STRIKEPLATE

Part Number Finish

23190001

23190003

23190004

Brass

Brushed Nickel

Oil Rubbed Bronze

Part Number Description Finish

122020FBRH 2D Hinge, RH Tuscan Bronze

122020FBLH 2D Hinge, LH

12202001RH 2D Hinge, RH Brass

12202001LH 2D Hinge, LH Brass

12202003RH 2D Hinge, RH Brushed Nickel

12202003LH 2D Hinge, LH

Tuscan Bronze

Brushed Nickel

45.8 [1.803]

47.6 [1.875]73.0 [2.875]88.9 [3.500]

7.3 [0.287]

10.2 [0.402]

45.8

[1.

803]

7.3

[0.2

87]

88.9 [3.500]73 [2.875]

47.6 [1.875]

14.5

[0.

571]

38.2 [1.505]

1.5

[0.0

59]

9.2

3.996”2.067”

0~0.236"

3.622” 4.016”

0.098”

0.228”

0.689”

0.053”

0.591”

ACCESSORIES

ROUTER BIT

Passage Lever Set Conversion Kit

ROCKWELL CONVERSION KITS FOR

2-1/4” THICK DOORS

0.800”

0.563”

0.406”

CONSTRUCTION HANDLES

Part Number Description

70100000 Construction Handle

Handle Set Conversion Kit

2 .000 "

3 .000 "

2 .500 "

25

DUST BOX FOR STRIKE

Deadbolt Conversion Kit


MPLDB203 Euro Groove Router Bit

1.0

00”

2 .875 "3 .465 "

0.87

0”

0 .032 "


70108700DB Dust box for Adjustable Strike


Passage Set Conversion Kit

Deadbolt Conversion Kit

Entry Handle Set Conversion Kit

MI-DL-PACK72

MI-DL-PACK73

MI-DL-PACK74

YORKSHIRE 200 SERIES NARROW STYLEPATIO DOOR MULTIPOINT LOCK

The Rockwell Yorkshire 200 series Narrow Style

Multipoint lock with deadlocking hooks top and bottom.

Dual opposing deadlocking hooks provide

anti-jemmy and a kickproof feature.

SPECIFICATIONS

26


Heavy gauge steel construction with Stainless Steel

Faceplate. 16mm eurogroove application.

MOUNTING HOLE CENTER :

Per industry practice

HANDLE TO HOLE LOCATION : 3.622"

KEY BACKSET : 1.377"

DEADBOLT : 3/4" (20mm) throw

LATCH : 1/2" throw

CYCLE TESTING: Cycle tested to over 100,000 cycles

Narrow backset fits most patio doors.

Single Piece construction maintains door panel

integrity while ensuring a simple, trouble free and easy

installation.

Lever operated Multipoint lock provides maximum

compression and sealing between door and frame

Non-handed and field reversible.


reliable operation.

Multipoint locks are available with compatible Rockwell

Narrow Style Multipoint lock door handles.

Part Number Material

20212200 Steel

EUROLUX NARROW STYLE DH2SERIES MULTIPOINT DOOR LOCK

Eurolox Narrowstyle Multipoint mortise lock for garden or patio doors are available with deadlocking hooks top and bottom.

One piece construction maintains door panel integrity while ensuring a simple, trouble free and easy installation.

3.74

3.94

Suitable for narrow style wood, vinyl, or aluminum doors.


Adjustable strikeplates allow for field adjustment.

SPECIFICATIONS

Part Number Material

2026497.1 Steel

All locks are available with compatible Rockwell Narrow Style multipoint swing door handles

27

Triple locking points provide security and the lever operated hooks provide maximum compression and sealing across the door and frame. Precision engineered components for a smooth and reliable operation.

Mounting dimensions conform to general industrypractice for Multipoint trims.


Heavy gauge steel with zinc dichromate

finish per ASTM-B633

MOUNTING HOLE CENTER : Per Industry practice

HANDLE TO HOLE LOCATION : 3.622”

KEY BACKSET : 1"

DEADBOLT : 3/4" throw

FACEPLATE: 18mm eurogroove application.

6.77

32.56

55.12

1"

27.39

3.62

3.74

5.30

9.17

26.00

17.68

1.71

CYCLE TESTING: Tested to over 100,000 cycles

NARROW STYLE 6500 MULTIPOINTLOCK TRIM SET

MATERIAL: Solid Forged Brass Construction

DOOR THICKNESS : 1.5" or 1-3/4"

CYLINDER : Anti-bump, 5 pin SC1 keyway, pin

depths and increments.

28

Part Number Finish

20265001 Brass


20265004 Black

MATERIAL : Aluminum construction

FINISH : WHITE

DOOR THICKNESS: 2.5”

NARROW STYLE 5100 MULTIPOINTLOCK HANDLE SET

Part Number Finish

51105551 White

3.925”

NARROW STYLE WINDSOR MULTIPOINT LOCKTRIM SET

29


CYLINDER : 90 degree Europrofile Cylinder

DOOR THICKNESS: 1-3/4”

Part Number Finish

61093304

61093371

61093373

Oil Rubbed Bronze

Brass

Brushed Nickel

3.622

1.496

2.756

3.925 8.740

1.378

2.230

4.468

8.740 2.756

3.622

1.496

1.378

2.285

Part Number Finish

62603304

62603371

62603373

Oil Rubbed Bronze

Brass

Brushed Nickel

NARROW STYLE CONTEMPORARY MULTIPOINT LOCK TRIM SET

EURO PROFILE LOCKING CYLINDERS

Euro Profile Cylinder Locks 90 degree Turn

30

MATERIAL: Solid Brass Construction with 2 solid

brass keys with set screws for easy rekeying

DOOR THICKNESS: 1-3/4"

SPECIFICATIONS: SC1 Keyway with SC1 pin

depths, and pin increments.

Part Number Finish

33330101 Brass





DOOR THICKNESS: 1-3/4"




Part Number Finish

33660101 Brass





DOOR THICKNESS: 2-1/2”




Part Number Finish

36454551 Brass



Solid Brass Euro profilecylinder 90 degree turn

Fits 1-3/4" thick door







18930032 Series Light to Medium Duty• Surface application for single acting doors with Stop and Friction adjustment.

Features and Benefits

• Stainless steel construction to withstand the toughest environmental conditions• Non handed (Reversible)

SpecificationsFor Doors

Track

Slide

Arm

Jamb Bracket

Handing

Spring

Finishes

Fasteners

Fits

18"-40" wide x 1-3/8"-1-3/4" thick

Stainless Steel, ¾” wide x 5/8” high x 0.059”

Wear resistant nylon for high load and wear applications

Stainless Steel 0.0134” x 9/16”

Stainless Steel ¾” x 3”

Reversible/Non-handed

Heavy duty shock spring

US32D

Machine screws, through-bolts, wood screws

36-1/16" to 42" wide doors, Up to 2-1/2" thick doors


16.635”

13.937”

2.850”

• Meets ANSI Grade 1 standards • Tested to 250,000 cycles and 300 lbs force testing

• Heavy duty track and Arm with offset Jamb bracket

18040032 Series Light to Medium Duty

• Surface application for single acting doors available in: o “S” –Stop only with shock absorbing spring and o “H” –Hold only (Special order) o “F” –Friction type (Special order)

Features and Benefits • Stainless steel construction to withstand the toughest environmental conditions• Non handed (Reversible)

SpecificationsFor Doors

Track

Slide

Arm

Jamb Bracket

Handing

Spring Heavy

Finishes

Fasteners

Fits

18"-40" wide x 1-3/8"-1-3/4" thick

Stainless Steel, ¾” wide x 5/8” high x 0.059”

Wear resistant nylon for high loading and wear applications

Stainless Steel 0.0134” x 9/16”

Stainless Steel ¾” x 3”

Reversible/Non-handed

Heavy duty shock spring

US32 and US32D (Other finishes maybe available on special order)

Machine screws, through-bolts, wood screws

36-1/16" to 42" wide doors, Up to 2-1/2" thick doors

(Other door size options available by special order)


16.635”

16.929”

2.850”

Documents

COMMERCIAL DOOR - Architectural Builders Supply Inc. 780-224 SL24 FM SFGHFS3083SD 780-157 SL57 FSCP GHFS 21 GHFS 30. 03 Rockwell Slimline exit devices are suitable for all doors