Upload
phungcong
View
216
Download
0
Embed Size (px)
Citation preview
TechnicalInformation
LD-V07 02/2013
Mineral core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004
1-3/4” (44 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) proprietary material (FPCM*). ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) proprietary material (FPCM*).
2” (51 mm) proprietary material (FPCM*).
Non-combustible mineral core.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband.
• Neutral or positive pressure.• Blocking for hardware.Refer to Technical space of our Website for details.
Cut-out for lite and louver with size limitations. Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Available in our 5-FD45-BE series
Laminated strand lumber core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1W.D.M.A. SERIES I.S. 1-A-2004ASTM D5456-09
1-3/8” (35 mm) – 1-3/4” (44 mm). 2” (51 mm) – 2-1/4” (57 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) structural composite lumber (SCL). ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) structural composite lumber (SCL).
1-7/16” (36 mm) structural composite lumber (SCL).
Structural composite lumber (SCL) with a density of 38 PCF (609 kg/m3) bonded to the stiles.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband. • [ Door 1-3/4” – (44 mm) ] 20 minute rating neutral or positive pressure. Refer to Technical space of our Website for details.• 15/16” (24 mm) wood (mill option) or hardwood laminated to 1” (25 mm) structural composite lumber (SCL).
• Wood louvers not permitted in 20 minute labeled doors.• Minimum 5” (127 mm) from stiles or rails.• Minimum 1-1/2” (38 mm) from cut-out to cut-out.Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2).
Available in our 5-LSL-BE series
Type
In conformity with industry standards
Thickness
Maximum size
Stiles
Rails
Core
Adhesive
Face Options Lite and louver openings
Notes
Warranty
Factory finish
Environmental description
Particleboard core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004 ASTM D5456-09 ANSI A208.1
1-3/4” (44 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 4” (102 mm) structural composite lumber (SCL). ME: 7/16” (11 mm) hardwood laminated to 4” (102 mm) structural composite lumber (SCL).
3” (76 mm) structural composite lumber (SCL).
Particleboard core with a density of 28-32 PCF (449-513 kg/m3) LD-1, bonded to the stiles and rails.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband. • LD-2 core. • 20 minute rating neutral or positive pressure. Refer to Technical space of our Website for details.• 15/16” (24 mm) wood (mill option) or hardwood
laminated to 4” (102 mm) structural composite lumber (SCL).
• Wood louvers not permitted in 20 minute labeled doors.• Minimum 5” (127 mm) from stiles or rails.• Minimum 1-1/2” (38 mm) from cut-out to cut-out.Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2).
Available in our 5-8300-BE series
Agrifiber core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004
1-3/4” (44 mm).
48” x 96” (1 219 mm x 2 438 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to proprietary material (FPCM*). ME: 7/16” (11 mm) hardwood laminated to proprietary material (FPCM*). Lock stile: 5” (127 mm) proprietary material (FPCM*). Hinges stile: 2” (51 mm) proprietary material (FPCM*).
2” (51 mm) proprietary material (FPCM*).
Low combustion proprietary agrifiber core.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband.
• Neutral or positive pressure.• Blocking for hardware.Refer to Technical space of our Website for details.
Cut-out for lite and louver with size limitations. Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2). Rapidly renewable material (LEED MRc6).
Available in our 5-AG45-BE series
* FPCM: Fire Proof Composite Material For structural composite lumber (SCL), Lambton Doors uses laminated strand lumber (LSL) with a density of 38 PCF (609 kg/m3).
More information on LEED® credits per door series are available in both of our LEED® and ENVIRO DESIGN brochures. Refer to Technical space of our Website or ask for printed documents.
5-FD45-CE 5-FD45-ME
5-AG45-CE 5-AG45-ME
5-FD60/90-CE 5-FD60/90-ME
Mineral core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004
1-3/4” (44 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) proprietary material (FPCM*). ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) proprietary material (FPCM*).
Top: 1-1/2” (38 mm) proprietary material (FPCM*). Bottom: 1-1/2” (38 mm) proprietary material (FPCM*).
Non-combustible mineral core.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband.
• Neutral or positive pressure.• Blocking for hardware.Refer to Technical space of our Website for details.
Cut-out for lite and louver with size limitations. Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Available in our 5-FD60/90-BE series
Customer ServiceTelephone418 486.74011 800 463.3124 (CAN)
1 800 363.2248 (USA)
Fax418 486.73811 800 561.7443 (CAN/USA)
[email protected] and DesignersYou can also reach us directly at
Mail235, 2nd Avenue, Lambton (Quebec) G0M 1H0 Canada
Active member of the planetary ecological movement
Think Green!
The mission of Lambton Doors is to develop, manufacture and sell high quality and value added interior wood doors and frames, of standard and ecological types, for the commercial, architectural and institutional markets.
These doors and frames meet the various North American building codes, as well as environmental codes when applicable, while respecting the customers’requirements.
We believe in a transformed
built environmentcontributing to
a sustainable future.
We believe in Good Forestry
StewardshipPractices.
The FSC® logo identifies products which contain wood from well-managed forests certified in accordance with the rules of the Forest Stewardship Council® A.C. P
rint
ed in
Can
ada
Particleboard core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004 ASTM D5456-09 ANSI A208.1
1-3/8” (35 mm) – 1-3/4” (44 mm). 2” (51 mm) – 2-1/4” (57 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) structural composite lumber (SCL).ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) structural composite lumber (SCL).
1-7/16” (36 mm) structural composite lumber (SCL).
Particleboard core with a density of 28-32 PCF (449-513 kg/m3) LD-1, bonded to the stiles and rails.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband. • LD-2 core. • [ Door 1-3/4” – (44 mm) ] 20 minute rating neutral or positive pressure. Refer to Technical space of our Website for details.• 15/16” (24 mm) wood (mill option) or hardwood
laminated to 1” (25 mm) structural composite lumber (SCL). • Bifold.
• Wood louvers not permitted in 20 minute labeled doors.• Cut-out must not exceed 40% of door area.• Minimum 5” (127 mm) from stiles or rails.• Minimum 1-1/2” (38 mm) from cut-out to cut-out.Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2).
Available in our 5-PC-BE series
5-PC-CE 5-PC-ME
5-8300-CE 5-8300-ME
5-LSL-CE 5-LSL-ME
COMMERCIAL andARCHITECTURALDOORS
5PLY
TechnicalInformation
LD-V07 02/2013
Mineral core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004
1-3/4” (44 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) proprietary material (FPCM*). ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) proprietary material (FPCM*).
2” (51 mm) proprietary material (FPCM*).
Non-combustible mineral core.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband.
• Neutral or positive pressure.• Blocking for hardware.Refer to Technical space of our Website for details.
Cut-out for lite and louver with size limitations. Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Available in our 5-FD45-BE series
Laminated strand lumber core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1W.D.M.A. SERIES I.S. 1-A-2004ASTM D5456-09
1-3/8” (35 mm) – 1-3/4” (44 mm). 2” (51 mm) – 2-1/4” (57 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) structural composite lumber (SCL). ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) structural composite lumber (SCL).
1-7/16” (36 mm) structural composite lumber (SCL).
Structural composite lumber (SCL) with a density of 38 PCF (609 kg/m3) bonded to the stiles.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband. • [ Door 1-3/4” – (44 mm) ] 20 minute rating neutral or positive pressure. Refer to Technical space of our Website for details.• 15/16” (24 mm) wood (mill option) or hardwood laminated to 1” (25 mm) structural composite lumber (SCL).
• Wood louvers not permitted in 20 minute labeled doors.• Minimum 5” (127 mm) from stiles or rails.• Minimum 1-1/2” (38 mm) from cut-out to cut-out.Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2).
Available in our 5-LSL-BE series
Type
In conformity with industry standards
Thickness
Maximum size
Stiles
Rails
Core
Adhesive
Face Options Lite and louver openings
Notes
Warranty
Factory finish
Environmental description
Particleboard core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004 ASTM D5456-09 ANSI A208.1
1-3/4” (44 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 4” (102 mm) structural composite lumber (SCL). ME: 7/16” (11 mm) hardwood laminated to 4” (102 mm) structural composite lumber (SCL).
3” (76 mm) structural composite lumber (SCL).
Particleboard core with a density of 28-32 PCF (449-513 kg/m3) LD-1, bonded to the stiles and rails.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband. • LD-2 core. • 20 minute rating neutral or positive pressure. Refer to Technical space of our Website for details.• 15/16” (24 mm) wood (mill option) or hardwood
laminated to 4” (102 mm) structural composite lumber (SCL).
• Wood louvers not permitted in 20 minute labeled doors.• Minimum 5” (127 mm) from stiles or rails.• Minimum 1-1/2” (38 mm) from cut-out to cut-out.Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2).
Available in our 5-8300-BE series
Agrifiber core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004
1-3/4” (44 mm).
48” x 96” (1 219 mm x 2 438 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to proprietary material (FPCM*). ME: 7/16” (11 mm) hardwood laminated to proprietary material (FPCM*). Lock stile: 5” (127 mm) proprietary material (FPCM*). Hinges stile: 2” (51 mm) proprietary material (FPCM*).
2” (51 mm) proprietary material (FPCM*).
Low combustion proprietary agrifiber core.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband.
• Neutral or positive pressure.• Blocking for hardware.Refer to Technical space of our Website for details.
Cut-out for lite and louver with size limitations. Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2). Rapidly renewable material (LEED MRc6).
Available in our 5-AG45-BE series
* FPCM: Fire Proof Composite Material For structural composite lumber (SCL), Lambton Doors uses laminated strand lumber (LSL) with a density of 38 PCF (609 kg/m3).
More information on LEED® credits per door series are available in both of our LEED® and ENVIRO DESIGN brochures. Refer to Technical space of our Website or ask for printed documents.
5-FD45-CE 5-FD45-ME
5-AG45-CE 5-AG45-ME
5-FD60/90-CE 5-FD60/90-ME
Mineral core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004
1-3/4” (44 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) proprietary material (FPCM*). ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) proprietary material (FPCM*).
Top: 1-1/2” (38 mm) proprietary material (FPCM*). Bottom: 1-1/2” (38 mm) proprietary material (FPCM*).
Non-combustible mineral core.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband.
• Neutral or positive pressure.• Blocking for hardware.Refer to Technical space of our Website for details.
Cut-out for lite and louver with size limitations. Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Available in our 5-FD60/90-BE series
Customer ServiceTelephone418 486.74011 800 463.3124 (CAN)
1 800 363.2248 (USA)
Fax418 486.73811 800 561.7443 (CAN/USA)
[email protected] and DesignersYou can also reach us directly at
Mail235, 2nd Avenue, Lambton (Quebec) G0M 1H0 Canada
Active member of the planetary ecological movement
Think Green!
The mission of Lambton Doors is to develop, manufacture and sell high quality and value added interior wood doors and frames, of standard and ecological types, for the commercial, architectural and institutional markets.
These doors and frames meet the various North American building codes, as well as environmental codes when applicable, while respecting the customers’requirements.
We believe in a transformed
built environmentcontributing to
a sustainable future.
We believe in Good Forestry
StewardshipPractices.
The FSC® logo identifies products which contain wood from well-managed forests certified in accordance with the rules of the Forest Stewardship Council® A.C. P
rint
ed in
Can
ada
Particleboard core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004 ASTM D5456-09 ANSI A208.1
1-3/8” (35 mm) – 1-3/4” (44 mm). 2” (51 mm) – 2-1/4” (57 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) structural composite lumber (SCL).ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) structural composite lumber (SCL).
1-7/16” (36 mm) structural composite lumber (SCL).
Particleboard core with a density of 28-32 PCF (449-513 kg/m3) LD-1, bonded to the stiles and rails.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband. • LD-2 core. • [ Door 1-3/4” – (44 mm) ] 20 minute rating neutral or positive pressure. Refer to Technical space of our Website for details.• 15/16” (24 mm) wood (mill option) or hardwood
laminated to 1” (25 mm) structural composite lumber (SCL). • Bifold.
• Wood louvers not permitted in 20 minute labeled doors.• Cut-out must not exceed 40% of door area.• Minimum 5” (127 mm) from stiles or rails.• Minimum 1-1/2” (38 mm) from cut-out to cut-out.Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2).
Available in our 5-PC-BE series
5-PC-CE 5-PC-ME
5-8300-CE 5-8300-ME
5-LSL-CE 5-LSL-ME
COMMERCIAL andARCHITECTURALDOORS
5PLY
TechnicalInformation
LD-V07 02/2013
Mineral core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004
1-3/4” (44 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) proprietary material (FPCM*). ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) proprietary material (FPCM*).
2” (51 mm) proprietary material (FPCM*).
Non-combustible mineral core.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband.
• Neutral or positive pressure.• Blocking for hardware.Refer to Technical space of our Website for details.
Cut-out for lite and louver with size limitations. Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Available in our 5-FD45-BE series
Laminated strand lumber core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1W.D.M.A. SERIES I.S. 1-A-2004ASTM D5456-09
1-3/8” (35 mm) – 1-3/4” (44 mm). 2” (51 mm) – 2-1/4” (57 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) structural composite lumber (SCL). ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) structural composite lumber (SCL).
1-7/16” (36 mm) structural composite lumber (SCL).
Structural composite lumber (SCL) with a density of 38 PCF (609 kg/m3) bonded to the stiles.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband. • [ Door 1-3/4” – (44 mm) ] 20 minute rating neutral or positive pressure. Refer to Technical space of our Website for details.• 15/16” (24 mm) wood (mill option) or hardwood laminated to 1” (25 mm) structural composite lumber (SCL).
• Wood louvers not permitted in 20 minute labeled doors.• Minimum 5” (127 mm) from stiles or rails.• Minimum 1-1/2” (38 mm) from cut-out to cut-out.Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2).
Available in our 5-LSL-BE series
Type
In conformity with industry standards
Thickness
Maximum size
Stiles
Rails
Core
Adhesive
Face Options Lite and louver openings
Notes
Warranty
Factory finish
Environmental description
Particleboard core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004 ASTM D5456-09 ANSI A208.1
1-3/4” (44 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 4” (102 mm) structural composite lumber (SCL). ME: 7/16” (11 mm) hardwood laminated to 4” (102 mm) structural composite lumber (SCL).
3” (76 mm) structural composite lumber (SCL).
Particleboard core with a density of 28-32 PCF (449-513 kg/m3) LD-1, bonded to the stiles and rails.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband. • LD-2 core. • 20 minute rating neutral or positive pressure. Refer to Technical space of our Website for details.• 15/16” (24 mm) wood (mill option) or hardwood
laminated to 4” (102 mm) structural composite lumber (SCL).
• Wood louvers not permitted in 20 minute labeled doors.• Minimum 5” (127 mm) from stiles or rails.• Minimum 1-1/2” (38 mm) from cut-out to cut-out.Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2).
Available in our 5-8300-BE series
Agrifiber core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004
1-3/4” (44 mm).
48” x 96” (1 219 mm x 2 438 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to proprietary material (FPCM*). ME: 7/16” (11 mm) hardwood laminated to proprietary material (FPCM*). Lock stile: 5” (127 mm) proprietary material (FPCM*). Hinges stile: 2” (51 mm) proprietary material (FPCM*).
2” (51 mm) proprietary material (FPCM*).
Low combustion proprietary agrifiber core.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband.
• Neutral or positive pressure.• Blocking for hardware.Refer to Technical space of our Website for details.
Cut-out for lite and louver with size limitations. Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2). Rapidly renewable material (LEED MRc6).
Available in our 5-AG45-BE series
* FPCM: Fire Proof Composite Material For structural composite lumber (SCL), Lambton Doors uses laminated strand lumber (LSL) with a density of 38 PCF (609 kg/m3).
More information on LEED® credits per door series are available in both of our LEED® and ENVIRO DESIGN brochures. Refer to Technical space of our Website or ask for printed documents.
5-FD45-CE 5-FD45-ME
5-AG45-CE 5-AG45-ME
5-FD60/90-CE 5-FD60/90-ME
Mineral core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004
1-3/4” (44 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) proprietary material (FPCM*). ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) proprietary material (FPCM*).
Top: 1-1/2” (38 mm) proprietary material (FPCM*). Bottom: 1-1/2” (38 mm) proprietary material (FPCM*).
Non-combustible mineral core.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband.
• Neutral or positive pressure.• Blocking for hardware.Refer to Technical space of our Website for details.
Cut-out for lite and louver with size limitations. Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Available in our 5-FD60/90-BE series
Customer ServiceTelephone418 486.74011 800 463.3124 (CAN)
1 800 363.2248 (USA)
Fax418 486.73811 800 561.7443 (CAN/USA)
[email protected] and DesignersYou can also reach us directly at
Mail235, 2nd Avenue, Lambton (Quebec) G0M 1H0 Canada
Active member of the planetary ecological movement
Think Green!
The mission of Lambton Doors is to develop, manufacture and sell high quality and value added interior wood doors and frames, of standard and ecological types, for the commercial, architectural and institutional markets.
These doors and frames meet the various North American building codes, as well as environmental codes when applicable, while respecting the customers’requirements.
We believe in a transformed
built environmentcontributing to
a sustainable future.
We believe in Good Forestry
StewardshipPractices.
The FSC® logo identifies products which contain wood from well-managed forests certified in accordance with the rules of the Forest Stewardship Council® A.C. P
rint
ed in
Can
ada
Particleboard core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004 ASTM D5456-09 ANSI A208.1
1-3/8” (35 mm) – 1-3/4” (44 mm). 2” (51 mm) – 2-1/4” (57 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) structural composite lumber (SCL).ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) structural composite lumber (SCL).
1-7/16” (36 mm) structural composite lumber (SCL).
Particleboard core with a density of 28-32 PCF (449-513 kg/m3) LD-1, bonded to the stiles and rails.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband. • LD-2 core. • [ Door 1-3/4” – (44 mm) ] 20 minute rating neutral or positive pressure. Refer to Technical space of our Website for details.• 15/16” (24 mm) wood (mill option) or hardwood
laminated to 1” (25 mm) structural composite lumber (SCL). • Bifold.
• Wood louvers not permitted in 20 minute labeled doors.• Cut-out must not exceed 40% of door area.• Minimum 5” (127 mm) from stiles or rails.• Minimum 1-1/2” (38 mm) from cut-out to cut-out.Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2).
Available in our 5-PC-BE series
5-PC-CE 5-PC-ME
5-8300-CE 5-8300-ME
5-LSL-CE 5-LSL-ME
COMMERCIAL andARCHITECTURALDOORS
5PLY
CALL our CuStomer ServICe DePArtment for more InformAtIonfDS: fire Door System + rating 20 = 20 minute (Positive pressure) / 90 = 90 minute (Positive pressure) / NP = Neutral pressure
13/16” (21 mm)
3/4” (19 mm)
AM-04
AM-08
AM-05
AM-10
AM-06
AM-11
Chevron
RatINGS aVaILabLE WIth MEtaL LOuVERS(not shown) uP tO 90 MINutE
False
AM-01 AM-02
3/4” (19 mm)
5/16” (8 mm)
AM-03
7/8” (22 mm)
1/2” (13 mm)
1/4” (6 mm) GLASS
1-3/4” (44 mm) DOOR
FORALL
THESEDESIGNS
7/8” (22 mm)
3/8” (10 mm)
LB1
3/4” (19 mm)
3/8” (10 mm)
LB5
3/8” (10 mm)
LB6
3/4” (19 mm)
3/8” (10 mm)
LB8
3/8” (10 mm)
LB7
3/4” (19 mm)
LB2
3/8” (10 mm)
1/16” x 1/16” (1,6 mm x 1,6 mm)
3/4” (19 mm)
TOP VIEW
3/4” (19 mm)
11/16” (17 mm)
3/8” (10 mm)
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
French DoorSquare MoulDing
5/8” (16 mm)
7/16” (11 mm)
Metal clips
FPCM*(Veneerwrapped)
LB7-90P
Intumescentincased
in black PVC
Positive orneutral pressure
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
AVAILABLE NON-RATED
1/2” (13 mm) 3/8” (10 mm)
7/8” (22 mm)
LB3
STANDARD vISION wooD LIte beAD DESIGNS overSIZe DOORSLouver modelS
STANDARD APPLIeD mouLDInG DESIGNS
STANDARD JAmbS and CASInGS
GrooveS AND InLAYS
LeAD LIneD DOORS
7/8” (22 mm)
1/2” (13 mm)
2-5/16” (59 mm)
13/16” (21 mm)3/4” (19 mm)
1-3/8” (35 mm)
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
1-3/4” (44 mm)
3/4” (19 mm)
3/4” (19 mm)
DOORDOOR
Architectural
1-3/4” (44 mm)
3/8” (10 mm)
2-1/4” (57 mm)
DOOR
3/8” (10 mm)
5/8” (16 mm)
5/16” (8 mm)
2” (51 mm)
Slat
1-3/4” (44 mm)
DOOR
3/4” (19 mm)
5/8” (16 mm)
3/16” (5 mm)
1/4” (6 mm)
1-3/16” (30 mm)
INdUSTRY ReCommeNdATIoNSlAmBToN dooRS
ReCommeNdATIoNS
X-Raysgenerated by peakvoltages
not exceeding
minimumthickness
mm in
Corresponding weight of lead
lbs/sq. ft.
lead thickness
75 kv 1,0 0.039 2-1/2 Two sheets of 1/32”(0.0625 in total)100 kv 1,5 0.059 4
125 kv 2,0 0.079 5Two sheets of 1/16”
(0.125 in total)150 kv 2,5 0.098 7
175 kv 3,0 0.118 8
200 kv 4,0 0.157 10 Two sheets of 1/8”(0.25 in total)225 kv 5,0 0.197 13
leAd ThICkNeSSeS AvAIlABle
1/32” - 1/16” - 1/8”Two sheets maximum
FIRe RATINgAvAIlABle
20 minute, neutral pressure only
lITe opeNINgNon Fire-Rated
- Maximum 1,628 m2
(2524 sq. in.)- Wood beads or metal lite kit
model #115-L2
lITe opeNINg Fire-Rated
- Maximum 1,628 m2
(2524 sq. in.)- Metal lite kit onlymodel # 115-L1
RECOMMENDED THICKNESSES of LEAD SHIELDING for X-RAY ROOMS
Available with lSl core only.lambton doors recommends the use of heavy duty hinges.
maximum lead supply by lambton doors is two sheets of thickness 1/8” (16 lbs/sq. ft.) per door.For other options, please refer to our Website.
LEAD LINED DOOR DETAILS
dUTCh dooR StAnDArD SHeLf moDeLS WITH MACHINING
SH-1
Specify length
R3” (R76 mm)5”(127 mm) 1-1/16” (27 mm)
SH-2
Specify length
For standard metal frame
R3” (R76 mm)
10-1/2”(267 mm)
1-1/16” (27 mm)
5”(127 mm)
5”(127 mm)
5”(127 mm)
Specify length
R3” (R76 mm)
R3” (R76 mm)10-1/2”(267 mm)
4-7/16”(113 mm)
3/4” (19 mm) For standard metal frame
SH-3
ShelfBracket*
ShelfBracket*
ShelfBracket*
Veneer Edge
Veneer Edge
VeneerEdge
VeneerEdge
VeneerEdge
VeneerEdge
Max. 1/8” (3 mm) gap
Max. 1/8” (3 mm) gap
Max. 1/8” (3 mm) gap
Max. 1/8” (3 mm) gap
3”(76 mm)
3”(76 mm)
3”(76 mm)
1-3/4”(44 mm)
1-3/4”(44 mm)
1-3/4”(44 mm)
1-3/4”(44 mm)
1-1/4”(32 mm)
D1
D3 D5
D2
Top view Top view
Jamb AssemblingRabbet Jamb RJT-Jamb TJ
CP-01 CP-02 CP-03 CP-04 CP-05
Over 48” wide Over 120” long Over 48” wide and over 120” long
Vary
Vary
Vary
Vary Vary
Vary
max. 108” (2 743 mm)
max. 108” (2 743 mm)
Vary max. 48” ( 1 219 mm)
Vary max. 48” (1 219 mm)
Vary max. 48” (1 219 mm)
Vary max. 48” (1 219 mm)
Vary max. 48” (1 219 mm)
Vary
OBVIOUS JOINT
OBVIOUSJOINT
OBVIOUSJOINTS
Custom jambs and sidelites also available. our engineered wood frame is built to be strong, solid and stable with no effect from moisture variation rate.
DOOR
WAL
L
WAL
L
DOOR
1-1/8”(29 mm)
1-1/8”(29 mm)
1-1/8”(29 mm)
5/8”(16 mm)
1/2”(13 mm)
45°5/8”
(16 mm)
5/8”(16 mm)
5/8”(16 mm)
5/8”(16 mm)
5/8”(16 mm)
7/16”(11 mm)
v Groove
U Groove
3/32”(2 mm)
1/2”(13 mm)
max.
rePAIr KITA Repair Kit for your order is available. Please contact our Customer Ser vice Department for information.
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
aLL DESIGNS
* 2 Shelf brackets supplied each side
ACouStICAL (StC) DOORS
STCRATINg
dooRThICkNeSS
mAXImUmFIRe RATINg
glAZINgTYpe
gASkeTSYSTem
271-3/4 in(44 mm)
20 min. P.P.
Yes
STC rating will be affect
Pemko products:Double row S88 SiliconSealTM gasket,
434ARL drop seal and 2005T threshold
311-3/4 in(44 mm)
321-3/4 in(44 mm)
90 min. P.P.
351-3/4 in(44 mm)
20 min. N.P.
351-3/4 in(44 mm)
90 min. P.P.
371-3/4 in(44 mm)
Non Fire-Rated
1/4” (6 mm)Tempered Glass
431-3/4 in(44 mm)
3/4” (19 mm) Sound Tempered Thermo Glass
441-3/4 in(44 mm)
NA451-3/4 in(44 mm)
Zero International: Spring #119W, Weatherstrip #475 and rabetted threshold #564
502-1/4 in(57 mm)
Pemko products: Double row S88 SiliconSealTM gasket,Weatherstrip 312R, 434ARL drop seal and 2005T threshold
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
AVAILABLE
AVAILABLE
AVAILABLE
AVAILABLE AVAILABLE AVAILABLE
11/16” (17 mm)
* FpCm: Fire proof Composite material
Inset panel | Shaker styleFDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
60NP
Vary
Miter joint Lap joint
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
DOOR
Metal Inlays
ANODIZED ALUMINUMor BRASS INLAY
1/8”(3 mm)
1/32”(0,8 mm)
1/2”(13 mm)
max.
1/2”(13 mm)
max.
DOOR
DOOR
lambton doors can match or customize to any moulding design.
Inset panel imitation | Recessed moulding
aLL 3 MODELS
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
9/64” (4 mm)
3/32”(2 mm)DOOR
All acoustical doors are available UF FRee and/or certified FSC.
2-1/4”(57 mm)
2-1/4”(57 mm)
2-1/4”(57 mm)
2-1/4”(57 mm)
3”(76 mm)
1-3/4” (44 mm)
LB8
CALL our CuStomer ServICe DePArtment for more InformAtIonfDS: fire Door System + rating 20 = 20 minute (Positive pressure) / 90 = 90 minute (Positive pressure) / NP = Neutral pressure
13/16” (21 mm)
3/4” (19 mm)
AM-04
AM-08
AM-05
AM-10
AM-06
AM-11
Chevron
RatINGS aVaILabLE WIth MEtaL LOuVERS(not shown) uP tO 90 MINutE
False
AM-01 AM-02
3/4” (19 mm)
5/16” (8 mm)
AM-03
7/8” (22 mm)
1/2” (13 mm)
1/4” (6 mm) GLASS
1-3/4” (44 mm) DOOR
FORALL
THESEDESIGNS
7/8” (22 mm)
3/8” (10 mm)
LB1
3/4” (19 mm)
3/8” (10 mm)
LB5
3/8” (10 mm)
LB6
3/4” (19 mm)
3/8” (10 mm)
LB8
3/8” (10 mm)
LB7
3/4” (19 mm)
LB2
3/8” (10 mm)
1/16” x 1/16” (1,6 mm x 1,6 mm)
3/4” (19 mm)
TOP VIEW
3/4” (19 mm)
11/16” (17 mm)
3/8” (10 mm)
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
French DoorSquare MoulDing
5/8” (16 mm)
7/16” (11 mm)
Metal clips
FPCM*(Veneerwrapped)
LB7-90P
Intumescentincased
in black PVC
Positive orneutral pressure
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
AVAILABLE NON-RATED
1/2” (13 mm) 3/8” (10 mm)
7/8” (22 mm)
LB3
STANDARD vISION wooD LIte beAD DESIGNS overSIZe DOORSLouver modelS
STANDARD APPLIeD mouLDInG DESIGNS
STANDARD JAmbS and CASInGS
GrooveS AND InLAYS
LeAD LIneD DOORS
7/8” (22 mm)
1/2” (13 mm)
2-5/16” (59 mm)
13/16” (21 mm)3/4” (19 mm)
1-3/8” (35 mm)
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
1-3/4” (44 mm)
3/4” (19 mm)
3/4” (19 mm)
DOORDOOR
Architectural
1-3/4” (44 mm)
3/8” (10 mm)
2-1/4” (57 mm)
DOOR
3/8” (10 mm)
5/8” (16 mm)
5/16” (8 mm)
2” (51 mm)
Slat
1-3/4” (44 mm)
DOOR
3/4” (19 mm)
5/8” (16 mm)
3/16” (5 mm)
1/4” (6 mm)
1-3/16” (30 mm)
INdUSTRY ReCommeNdATIoNSlAmBToN dooRS
ReCommeNdATIoNS
X-Raysgenerated by peakvoltages
not exceeding
minimumthickness
mm in
Corresponding weight of lead
lbs/sq. ft.
lead thickness
75 kv 1,0 0.039 2-1/2 Two sheets of 1/32”(0.0625 in total)100 kv 1,5 0.059 4
125 kv 2,0 0.079 5Two sheets of 1/16”
(0.125 in total)150 kv 2,5 0.098 7
175 kv 3,0 0.118 8
200 kv 4,0 0.157 10 Two sheets of 1/8”(0.25 in total)225 kv 5,0 0.197 13
leAd ThICkNeSSeS AvAIlABle
1/32” - 1/16” - 1/8”Two sheets maximum
FIRe RATINgAvAIlABle
20 minute, neutral pressure only
lITe opeNINgNon Fire-Rated
- Maximum 1,628 m2
(2524 sq. in.)- Wood beads or metal lite kit
model #115-L2
lITe opeNINg Fire-Rated
- Maximum 1,628 m2
(2524 sq. in.)- Metal lite kit onlymodel # 115-L1
RECOMMENDED THICKNESSES of LEAD SHIELDING for X-RAY ROOMS
Available with lSl core only.lambton doors recommends the use of heavy duty hinges.
maximum lead supply by lambton doors is two sheets of thickness 1/8” (16 lbs/sq. ft.) per door.For other options, please refer to our Website.
LEAD LINED DOOR DETAILS
dUTCh dooR StAnDArD SHeLf moDeLS WITH MACHINING
SH-1
Specify length
R3” (R76 mm)5”(127 mm) 1-1/16” (27 mm)
SH-2
Specify length
For standard metal frame
R3” (R76 mm)
10-1/2”(267 mm)
1-1/16” (27 mm)
5”(127 mm)
5”(127 mm)
5”(127 mm)
Specify length
R3” (R76 mm)
R3” (R76 mm)10-1/2”(267 mm)
4-7/16”(113 mm)
3/4” (19 mm) For standard metal frame
SH-3
ShelfBracket*
ShelfBracket*
ShelfBracket*
Veneer Edge
Veneer Edge
VeneerEdge
VeneerEdge
VeneerEdge
VeneerEdge
Max. 1/8” (3 mm) gap
Max. 1/8” (3 mm) gap
Max. 1/8” (3 mm) gap
Max. 1/8” (3 mm) gap
3”(76 mm)
3”(76 mm)
3”(76 mm)
1-3/4”(44 mm)
1-3/4”(44 mm)
1-3/4”(44 mm)
1-3/4”(44 mm)
1-1/4”(32 mm)
D1
D3 D5
D2
Top view Top view
Jamb AssemblingRabbet Jamb RJT-Jamb TJ
CP-01 CP-02 CP-03 CP-04 CP-05
Over 48” wide Over 120” long Over 48” wide and over 120” long
Vary
Vary
Vary
Vary Vary
Vary
max. 108” (2 743 mm)
max. 108” (2 743 mm)
Vary max. 48” ( 1 219 mm)
Vary max. 48” (1 219 mm)
Vary max. 48” (1 219 mm)
Vary max. 48” (1 219 mm)
Vary max. 48” (1 219 mm)
Vary
OBVIOUS JOINT
OBVIOUSJOINT
OBVIOUSJOINTS
Custom jambs and sidelites also available. our engineered wood frame is built to be strong, solid and stable with no effect from moisture variation rate.
DOOR
WAL
L
WAL
L
DOOR
1-1/8”(29 mm)
1-1/8”(29 mm)
1-1/8”(29 mm)
5/8”(16 mm)
1/2”(13 mm)
45°5/8”
(16 mm)
5/8”(16 mm)
5/8”(16 mm)
5/8”(16 mm)
5/8”(16 mm)
7/16”(11 mm)
v Groove
U Groove
3/32”(2 mm)
1/2”(13 mm)
max.
rePAIr KITA Repair Kit for your order is available. Please contact our Customer Ser vice Department for information.
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
aLL DESIGNS
* 2 Shelf brackets supplied each side
ACouStICAL (StC) DOORS
STCRATINg
dooRThICkNeSS
mAXImUmFIRe RATINg
glAZINgTYpe
gASkeTSYSTem
271-3/4 in(44 mm)
20 min. P.P.
Yes
STC rating will be affect
Pemko products:Double row S88 SiliconSealTM gasket,
434ARL drop seal and 2005T threshold
311-3/4 in(44 mm)
321-3/4 in(44 mm)
90 min. P.P.
351-3/4 in(44 mm)
20 min. N.P.
351-3/4 in(44 mm)
90 min. P.P.
371-3/4 in(44 mm)
Non Fire-Rated
1/4” (6 mm)Tempered Glass
431-3/4 in(44 mm)
3/4” (19 mm) Sound Tempered Thermo Glass
441-3/4 in(44 mm)
NA451-3/4 in(44 mm)
Zero International: Spring #119W, Weatherstrip #475 and rabetted threshold #564
502-1/4 in(57 mm)
Pemko products: Double row S88 SiliconSealTM gasket,Weatherstrip 312R, 434ARL drop seal and 2005T threshold
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
AVAILABLE
AVAILABLE
AVAILABLE
AVAILABLE AVAILABLE AVAILABLE
11/16” (17 mm)
* FpCm: Fire proof Composite material
Inset panel | Shaker styleFDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
60NP
Vary
Miter joint Lap joint
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
DOOR
Metal Inlays
ANODIZED ALUMINUMor BRASS INLAY
1/8”(3 mm)
1/32”(0,8 mm)
1/2”(13 mm)
max.
1/2”(13 mm)
max.
DOOR
DOOR
lambton doors can match or customize to any moulding design.
Inset panel imitation | Recessed moulding
aLL 3 MODELS
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
9/64” (4 mm)
3/32”(2 mm)DOOR
All acoustical doors are available UF FRee and/or certified FSC.
2-1/4”(57 mm)
2-1/4”(57 mm)
2-1/4”(57 mm)
2-1/4”(57 mm)
3”(76 mm)
1-3/4” (44 mm)
LB8
CALL our CuStomer ServICe DePArtment for more InformAtIonfDS: fire Door System + rating 20 = 20 minute (Positive pressure) / 90 = 90 minute (Positive pressure) / NP = Neutral pressure
13/16” (21 mm)
3/4” (19 mm)
AM-04
AM-08
AM-05
AM-10
AM-06
AM-11
Chevron
RatINGS aVaILabLE WIth MEtaL LOuVERS(not shown) uP tO 90 MINutE
False
AM-01 AM-02
3/4” (19 mm)
5/16” (8 mm)
AM-03
7/8” (22 mm)
1/2” (13 mm)
1/4” (6 mm) GLASS
1-3/4” (44 mm) DOOR
FORALL
THESEDESIGNS
7/8” (22 mm)
3/8” (10 mm)
LB1
3/4” (19 mm)
3/8” (10 mm)
LB5
3/8” (10 mm)
LB6
3/4” (19 mm)
3/8” (10 mm)
LB8
3/8” (10 mm)
LB7
3/4” (19 mm)
LB2
3/8” (10 mm)
1/16” x 1/16” (1,6 mm x 1,6 mm)
3/4” (19 mm)
TOP VIEW
3/4” (19 mm)
11/16” (17 mm)
3/8” (10 mm)
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
French DoorSquare MoulDing
5/8” (16 mm)
7/16” (11 mm)
Metal clips
FPCM*(Veneerwrapped)
LB7-90P
Intumescentincased
in black PVC
Positive orneutral pressure
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
AVAILABLE NON-RATED
1/2” (13 mm) 3/8” (10 mm)
7/8” (22 mm)
LB3
STANDARD vISION wooD LIte beAD DESIGNS overSIZe DOORSLouver modelS
STANDARD APPLIeD mouLDInG DESIGNS
STANDARD JAmbS and CASInGS
GrooveS AND InLAYS
LeAD LIneD DOORS
7/8” (22 mm)
1/2” (13 mm)
2-5/16” (59 mm)
13/16” (21 mm)3/4” (19 mm)
1-3/8” (35 mm)
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
1-3/4” (44 mm)
3/4” (19 mm)
3/4” (19 mm)
DOORDOOR
Architectural
1-3/4” (44 mm)
3/8” (10 mm)
2-1/4” (57 mm)
DOOR
3/8” (10 mm)
5/8” (16 mm)
5/16” (8 mm)
2” (51 mm)
Slat
1-3/4” (44 mm)
DOOR
3/4” (19 mm)
5/8” (16 mm)
3/16” (5 mm)
1/4” (6 mm)
1-3/16” (30 mm)
INdUSTRY ReCommeNdATIoNSlAmBToN dooRS
ReCommeNdATIoNS
X-Raysgenerated by peakvoltages
not exceeding
minimumthickness
mm in
Corresponding weight of lead
lbs/sq. ft.
lead thickness
75 kv 1,0 0.039 2-1/2 Two sheets of 1/32”(0.0625 in total)100 kv 1,5 0.059 4
125 kv 2,0 0.079 5Two sheets of 1/16”
(0.125 in total)150 kv 2,5 0.098 7
175 kv 3,0 0.118 8
200 kv 4,0 0.157 10 Two sheets of 1/8”(0.25 in total)225 kv 5,0 0.197 13
leAd ThICkNeSSeS AvAIlABle
1/32” - 1/16” - 1/8”Two sheets maximum
FIRe RATINgAvAIlABle
20 minute, neutral pressure only
lITe opeNINgNon Fire-Rated
- Maximum 1,628 m2
(2524 sq. in.)- Wood beads or metal lite kit
model #115-L2
lITe opeNINg Fire-Rated
- Maximum 1,628 m2
(2524 sq. in.)- Metal lite kit onlymodel # 115-L1
RECOMMENDED THICKNESSES of LEAD SHIELDING for X-RAY ROOMS
Available with lSl core only.lambton doors recommends the use of heavy duty hinges.
maximum lead supply by lambton doors is two sheets of thickness 1/8” (16 lbs/sq. ft.) per door.For other options, please refer to our Website.
LEAD LINED DOOR DETAILS
dUTCh dooR StAnDArD SHeLf moDeLS WITH MACHINING
SH-1
Specify length
R3” (R76 mm)5”(127 mm) 1-1/16” (27 mm)
SH-2
Specify length
For standard metal frame
R3” (R76 mm)
10-1/2”(267 mm)
1-1/16” (27 mm)
5”(127 mm)
5”(127 mm)
5”(127 mm)
Specify length
R3” (R76 mm)
R3” (R76 mm)10-1/2”(267 mm)
4-7/16”(113 mm)
3/4” (19 mm) For standard metal frame
SH-3
ShelfBracket*
ShelfBracket*
ShelfBracket*
Veneer Edge
Veneer Edge
VeneerEdge
VeneerEdge
VeneerEdge
VeneerEdge
Max. 1/8” (3 mm) gap
Max. 1/8” (3 mm) gap
Max. 1/8” (3 mm) gap
Max. 1/8” (3 mm) gap
3”(76 mm)
3”(76 mm)
3”(76 mm)
1-3/4”(44 mm)
1-3/4”(44 mm)
1-3/4”(44 mm)
1-3/4”(44 mm)
1-1/4”(32 mm)
D1
D3 D5
D2
Top view Top view
Jamb AssemblingRabbet Jamb RJT-Jamb TJ
CP-01 CP-02 CP-03 CP-04 CP-05
Over 48” wide Over 120” long Over 48” wide and over 120” long
Vary
Vary
Vary
Vary Vary
Vary
max. 108” (2 743 mm)
max. 108” (2 743 mm)
Vary max. 48” ( 1 219 mm)
Vary max. 48” (1 219 mm)
Vary max. 48” (1 219 mm)
Vary max. 48” (1 219 mm)
Vary max. 48” (1 219 mm)
Vary
OBVIOUS JOINT
OBVIOUSJOINT
OBVIOUSJOINTS
Custom jambs and sidelites also available. our engineered wood frame is built to be strong, solid and stable with no effect from moisture variation rate.
DOOR
WAL
L
WAL
L
DOOR
1-1/8”(29 mm)
1-1/8”(29 mm)
1-1/8”(29 mm)
5/8”(16 mm)
1/2”(13 mm)
45°5/8”
(16 mm)
5/8”(16 mm)
5/8”(16 mm)
5/8”(16 mm)
5/8”(16 mm)
7/16”(11 mm)
v Groove
U Groove
3/32”(2 mm)
1/2”(13 mm)
max.
rePAIr KITA Repair Kit for your order is available. Please contact our Customer Ser vice Department for information.
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
aLL DESIGNS
* 2 Shelf brackets supplied each side
ACouStICAL (StC) DOORS
STCRATINg
dooRThICkNeSS
mAXImUmFIRe RATINg
glAZINgTYpe
gASkeTSYSTem
271-3/4 in(44 mm)
20 min. P.P.
Yes
STC rating will be affect
Pemko products:Double row S88 SiliconSealTM gasket,
434ARL drop seal and 2005T threshold
311-3/4 in(44 mm)
321-3/4 in(44 mm)
90 min. P.P.
351-3/4 in(44 mm)
20 min. N.P.
351-3/4 in(44 mm)
90 min. P.P.
371-3/4 in(44 mm)
Non Fire-Rated
1/4” (6 mm)Tempered Glass
431-3/4 in(44 mm)
3/4” (19 mm) Sound Tempered Thermo Glass
441-3/4 in(44 mm)
NA451-3/4 in(44 mm)
Zero International: Spring #119W, Weatherstrip #475 and rabetted threshold #564
502-1/4 in(57 mm)
Pemko products: Double row S88 SiliconSealTM gasket,Weatherstrip 312R, 434ARL drop seal and 2005T threshold
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
AVAILABLE
AVAILABLE
AVAILABLE
AVAILABLE AVAILABLE AVAILABLE
11/16” (17 mm)
* FpCm: Fire proof Composite material
Inset panel | Shaker styleFDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
60NP
Vary
Miter joint Lap joint
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
DOOR
Metal Inlays
ANODIZED ALUMINUMor BRASS INLAY
1/8”(3 mm)
1/32”(0,8 mm)
1/2”(13 mm)
max.
1/2”(13 mm)
max.
DOOR
DOOR
lambton doors can match or customize to any moulding design.
Inset panel imitation | Recessed moulding
aLL 3 MODELS
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
9/64” (4 mm)
3/32”(2 mm)DOOR
All acoustical doors are available UF FRee and/or certified FSC.
2-1/4”(57 mm)
2-1/4”(57 mm)
2-1/4”(57 mm)
2-1/4”(57 mm)
3”(76 mm)
1-3/4” (44 mm)
LB8
CALL our CuStomer ServICe DePArtment for more InformAtIonfDS: fire Door System + rating 20 = 20 minute (Positive pressure) / 90 = 90 minute (Positive pressure) / NP = Neutral pressure
13/16” (21 mm)
3/4” (19 mm)
AM-04
AM-08
AM-05
AM-10
AM-06
AM-11
Chevron
RatINGS aVaILabLE WIth MEtaL LOuVERS(not shown) uP tO 90 MINutE
False
AM-01 AM-02
3/4” (19 mm)
5/16” (8 mm)
AM-03
7/8” (22 mm)
1/2” (13 mm)
1/4” (6 mm) GLASS
1-3/4” (44 mm) DOOR
FORALL
THESEDESIGNS
7/8” (22 mm)
3/8” (10 mm)
LB1
3/4” (19 mm)
3/8” (10 mm)
LB5
3/8” (10 mm)
LB6
3/4” (19 mm)
3/8” (10 mm)
LB8
3/8” (10 mm)
LB7
3/4” (19 mm)
LB2
3/8” (10 mm)
1/16” x 1/16” (1,6 mm x 1,6 mm)
3/4” (19 mm)
TOP VIEW
3/4” (19 mm)
11/16” (17 mm)
3/8” (10 mm)
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
French DoorSquare MoulDing
5/8” (16 mm)
7/16” (11 mm)
Metal clips
FPCM*(Veneerwrapped)
LB7-90P
Intumescentincased
in black PVC
Positive orneutral pressure
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
AVAILABLE NON-RATED
1/2” (13 mm) 3/8” (10 mm)
7/8” (22 mm)
LB3
STANDARD vISION wooD LIte beAD DESIGNS overSIZe DOORSLouver modelS
STANDARD APPLIeD mouLDInG DESIGNS
STANDARD JAmbS and CASInGS
GrooveS AND InLAYS
LeAD LIneD DOORS
7/8” (22 mm)
1/2” (13 mm)
2-5/16” (59 mm)
13/16” (21 mm)3/4” (19 mm)
1-3/8” (35 mm)
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
1-3/4” (44 mm)
3/4” (19 mm)
3/4” (19 mm)
DOORDOOR
Architectural
1-3/4” (44 mm)
3/8” (10 mm)
2-1/4” (57 mm)
DOOR
3/8” (10 mm)
5/8” (16 mm)
5/16” (8 mm)
2” (51 mm)
Slat
1-3/4” (44 mm)
DOOR
3/4” (19 mm)
5/8” (16 mm)
3/16” (5 mm)
1/4” (6 mm)
1-3/16” (30 mm)
INdUSTRY ReCommeNdATIoNSlAmBToN dooRS
ReCommeNdATIoNS
X-Raysgenerated by peakvoltages
not exceeding
minimumthickness
mm in
Corresponding weight of lead
lbs/sq. ft.
lead thickness
75 kv 1,0 0.039 2-1/2 Two sheets of 1/32”(0.0625 in total)100 kv 1,5 0.059 4
125 kv 2,0 0.079 5Two sheets of 1/16”
(0.125 in total)150 kv 2,5 0.098 7
175 kv 3,0 0.118 8
200 kv 4,0 0.157 10 Two sheets of 1/8”(0.25 in total)225 kv 5,0 0.197 13
leAd ThICkNeSSeS AvAIlABle
1/32” - 1/16” - 1/8”Two sheets maximum
FIRe RATINgAvAIlABle
20 minute, neutral pressure only
lITe opeNINgNon Fire-Rated
- Maximum 1,628 m2
(2524 sq. in.)- Wood beads or metal lite kit
model #115-L2
lITe opeNINg Fire-Rated
- Maximum 1,628 m2
(2524 sq. in.)- Metal lite kit onlymodel # 115-L1
RECOMMENDED THICKNESSES of LEAD SHIELDING for X-RAY ROOMS
Available with lSl core only.lambton doors recommends the use of heavy duty hinges.
maximum lead supply by lambton doors is two sheets of thickness 1/8” (16 lbs/sq. ft.) per door.For other options, please refer to our Website.
LEAD LINED DOOR DETAILS
dUTCh dooR StAnDArD SHeLf moDeLS WITH MACHINING
SH-1
Specify length
R3” (R76 mm)5”(127 mm) 1-1/16” (27 mm)
SH-2
Specify length
For standard metal frame
R3” (R76 mm)
10-1/2”(267 mm)
1-1/16” (27 mm)
5”(127 mm)
5”(127 mm)
5”(127 mm)
Specify length
R3” (R76 mm)
R3” (R76 mm)10-1/2”(267 mm)
4-7/16”(113 mm)
3/4” (19 mm) For standard metal frame
SH-3
ShelfBracket*
ShelfBracket*
ShelfBracket*
Veneer Edge
Veneer Edge
VeneerEdge
VeneerEdge
VeneerEdge
VeneerEdge
Max. 1/8” (3 mm) gap
Max. 1/8” (3 mm) gap
Max. 1/8” (3 mm) gap
Max. 1/8” (3 mm) gap
3”(76 mm)
3”(76 mm)
3”(76 mm)
1-3/4”(44 mm)
1-3/4”(44 mm)
1-3/4”(44 mm)
1-3/4”(44 mm)
1-1/4”(32 mm)
D1
D3 D5
D2
Top view Top view
Jamb AssemblingRabbet Jamb RJT-Jamb TJ
CP-01 CP-02 CP-03 CP-04 CP-05
Over 48” wide Over 120” long Over 48” wide and over 120” long
Vary
Vary
Vary
Vary Vary
Vary
max. 108” (2 743 mm)
max. 108” (2 743 mm)
Vary max. 48” ( 1 219 mm)
Vary max. 48” (1 219 mm)
Vary max. 48” (1 219 mm)
Vary max. 48” (1 219 mm)
Vary max. 48” (1 219 mm)
Vary
OBVIOUS JOINT
OBVIOUSJOINT
OBVIOUSJOINTS
Custom jambs and sidelites also available. our engineered wood frame is built to be strong, solid and stable with no effect from moisture variation rate.
DOOR
WAL
L
WAL
L
DOOR
1-1/8”(29 mm)
1-1/8”(29 mm)
1-1/8”(29 mm)
5/8”(16 mm)
1/2”(13 mm)
45°5/8”
(16 mm)
5/8”(16 mm)
5/8”(16 mm)
5/8”(16 mm)
5/8”(16 mm)
7/16”(11 mm)
v Groove
U Groove
3/32”(2 mm)
1/2”(13 mm)
max.
rePAIr KITA Repair Kit for your order is available. Please contact our Customer Ser vice Department for information.
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
aLL DESIGNS
* 2 Shelf brackets supplied each side
ACouStICAL (StC) DOORS
STCRATINg
dooRThICkNeSS
mAXImUmFIRe RATINg
glAZINgTYpe
gASkeTSYSTem
271-3/4 in(44 mm)
20 min. P.P.
Yes
STC rating will be affect
Pemko products:Double row S88 SiliconSealTM gasket,
434ARL drop seal and 2005T threshold
311-3/4 in(44 mm)
321-3/4 in(44 mm)
90 min. P.P.
351-3/4 in(44 mm)
20 min. N.P.
351-3/4 in(44 mm)
90 min. P.P.
371-3/4 in(44 mm)
Non Fire-Rated
1/4” (6 mm)Tempered Glass
431-3/4 in(44 mm)
3/4” (19 mm) Sound Tempered Thermo Glass
441-3/4 in(44 mm)
NA451-3/4 in(44 mm)
Zero International: Spring #119W, Weatherstrip #475 and rabetted threshold #564
502-1/4 in(57 mm)
Pemko products: Double row S88 SiliconSealTM gasket,Weatherstrip 312R, 434ARL drop seal and 2005T threshold
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
AVAILABLE
AVAILABLE
AVAILABLE
AVAILABLE AVAILABLE AVAILABLE
11/16” (17 mm)
* FpCm: Fire proof Composite material
Inset panel | Shaker styleFDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
60NP
Vary
Miter joint Lap joint
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
DOOR
Metal Inlays
ANODIZED ALUMINUMor BRASS INLAY
1/8”(3 mm)
1/32”(0,8 mm)
1/2”(13 mm)
max.
1/2”(13 mm)
max.
DOOR
DOOR
lambton doors can match or customize to any moulding design.
Inset panel imitation | Recessed moulding
aLL 3 MODELS
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
FDS
90NP
SPCF
90PN
FDS
60
SPCF
60PN
FDS
45+
SPCF
45+
FDS
20+
SPCF
20+
FDS
20
SPCF
20
FDS
45
SPCF
45
FDS
90
SPCF
90
9/64” (4 mm)
3/32”(2 mm)DOOR
All acoustical doors are available UF FRee and/or certified FSC.
2-1/4”(57 mm)
2-1/4”(57 mm)
2-1/4”(57 mm)
2-1/4”(57 mm)
3”(76 mm)
1-3/4” (44 mm)
LB8
TechnicalInformation
LD-V07 02/2013
Mineral core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004
1-3/4” (44 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) proprietary material (FPCM*). ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) proprietary material (FPCM*).
2” (51 mm) proprietary material (FPCM*).
Non-combustible mineral core.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband.
• Neutral or positive pressure.• Blocking for hardware.Refer to Technical space of our Website for details.
Cut-out for lite and louver with size limitations. Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Available in our 5-FD45-BE series
Laminated strand lumber core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1W.D.M.A. SERIES I.S. 1-A-2004ASTM D5456-09
1-3/8” (35 mm) – 1-3/4” (44 mm). 2” (51 mm) – 2-1/4” (57 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) structural composite lumber (SCL). ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) structural composite lumber (SCL).
1-7/16” (36 mm) structural composite lumber (SCL).
Structural composite lumber (SCL) with a density of 38 PCF (609 kg/m3) bonded to the stiles.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband. • [ Door 1-3/4” – (44 mm) ] 20 minute rating neutral or positive pressure. Refer to Technical space of our Website for details.• 15/16” (24 mm) wood (mill option) or hardwood laminated to 1” (25 mm) structural composite lumber (SCL).
• Wood louvers not permitted in 20 minute labeled doors.• Minimum 5” (127 mm) from stiles or rails.• Minimum 1-1/2” (38 mm) from cut-out to cut-out.Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2).
Available in our 5-LSL-BE series
Type
In conformity with industry standards
Thickness
Maximum size
Stiles
Rails
Core
Adhesive
Face Options Lite and louver openings
Notes
Warranty
Factory finish
Environmental description
Particleboard core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004 ASTM D5456-09 ANSI A208.1
1-3/4” (44 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 4” (102 mm) structural composite lumber (SCL). ME: 7/16” (11 mm) hardwood laminated to 4” (102 mm) structural composite lumber (SCL).
3” (76 mm) structural composite lumber (SCL).
Particleboard core with a density of 28-32 PCF (449-513 kg/m3) LD-1, bonded to the stiles and rails.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband. • LD-2 core. • 20 minute rating neutral or positive pressure. Refer to Technical space of our Website for details.• 15/16” (24 mm) wood (mill option) or hardwood
laminated to 4” (102 mm) structural composite lumber (SCL).
• Wood louvers not permitted in 20 minute labeled doors.• Minimum 5” (127 mm) from stiles or rails.• Minimum 1-1/2” (38 mm) from cut-out to cut-out.Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2).
Available in our 5-8300-BE series
Agrifiber core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004
1-3/4” (44 mm).
48” x 96” (1 219 mm x 2 438 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to proprietary material (FPCM*). ME: 7/16” (11 mm) hardwood laminated to proprietary material (FPCM*). Lock stile: 5” (127 mm) proprietary material (FPCM*). Hinges stile: 2” (51 mm) proprietary material (FPCM*).
2” (51 mm) proprietary material (FPCM*).
Low combustion proprietary agrifiber core.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband.
• Neutral or positive pressure.• Blocking for hardware.Refer to Technical space of our Website for details.
Cut-out for lite and louver with size limitations. Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2). Rapidly renewable material (LEED MRc6).
Available in our 5-AG45-BE series
* FPCM: Fire Proof Composite Material For structural composite lumber (SCL), Lambton Doors uses laminated strand lumber (LSL) with a density of 38 PCF (609 kg/m3).
More information on LEED® credits per door series are available in both of our LEED® and ENVIRO DESIGN brochures. Refer to Technical space of our Website or ask for printed documents.
5-FD45-CE 5-FD45-ME
5-AG45-CE 5-AG45-ME
5-FD60/90-CE 5-FD60/90-ME
Mineral core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004
1-3/4” (44 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) proprietary material (FPCM*). ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) proprietary material (FPCM*).
Top: 1-1/2” (38 mm) proprietary material (FPCM*). Bottom: 1-1/2” (38 mm) proprietary material (FPCM*).
Non-combustible mineral core.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband.
• Neutral or positive pressure.• Blocking for hardware.Refer to Technical space of our Website for details.
Cut-out for lite and louver with size limitations. Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Available in our 5-FD60/90-BE series
Customer ServiceTelephone418 486.74011 800 463.3124 (CAN)
1 800 363.2248 (USA)
Fax418 486.73811 800 561.7443 (CAN/USA)
[email protected] and DesignersYou can also reach us directly at
Mail235, 2nd Avenue, Lambton (Quebec) G0M 1H0 Canada
Active member of the planetary ecological movement
Think Green!
The mission of Lambton Doors is to develop, manufacture and sell high quality and value added interior wood doors and frames, of standard and ecological types, for the commercial, architectural and institutional markets.
These doors and frames meet the various North American building codes, as well as environmental codes when applicable, while respecting the customers’requirements.
We believe in a transformed
built environmentcontributing to
a sustainable future.
We believe in Good Forestry
StewardshipPractices.
The FSC® logo identifies products which contain wood from well-managed forests certified in accordance with the rules of the Forest Stewardship Council® A.C. P
rint
ed in
Can
ada
Particleboard core (interior use).
ARCHITECTURAL WOODWORK STANDARDS-ED.1 W.D.M.A. SERIES I.S. 1-A-2004 ASTM D5456-09 ANSI A208.1
1-3/8” (35 mm) – 1-3/4” (44 mm). 2” (51 mm) – 2-1/4” (57 mm).
48” x 120” (1 219 mm x 3 048 mm).
CE: 7/16” (11 mm) wood (mill option) laminated to 1” (25 mm) structural composite lumber (SCL).ME: 7/16” (11 mm) hardwood laminated to 1” (25 mm) structural composite lumber (SCL).
1-7/16” (36 mm) structural composite lumber (SCL).
Particleboard core with a density of 28-32 PCF (449-513 kg/m3) LD-1, bonded to the stiles and rails.
Type I (waterproof); PVA (no urea formaldehyde); VOC < 0.683 g/L.
Wood veneer or MDO bonded to a composite crossband. • LD-2 core. • [ Door 1-3/4” – (44 mm) ] 20 minute rating neutral or positive pressure. Refer to Technical space of our Website for details.• 15/16” (24 mm) wood (mill option) or hardwood
laminated to 1” (25 mm) structural composite lumber (SCL). • Bifold.
• Wood louvers not permitted in 20 minute labeled doors.• Cut-out must not exceed 40% of door area.• Minimum 5” (127 mm) from stiles or rails.• Minimum 1-1/2” (38 mm) from cut-out to cut-out.Refer to Technical space of our Website for details.
Stile and rail dimensions shown are rough sizes, before trimming. Dimensions will vary due to prefit requirements.
Life of original installation. See our complete warranty for details.
UV Finishing System. Stain, clearcoat, opaque and primed finish available. Custom color matching available. Seal top and bottom standard. No VOC.
Recycled content (LEED MRc4.1, 4.2).
Available in our 5-PC-BE series
5-PC-CE 5-PC-ME
5-8300-CE 5-8300-ME
5-LSL-CE 5-LSL-ME
COMMERCIAL andARCHITECTURALDOORS
5PLY