ComiX. AskYourLocksmith.com Lancaster, Pennsylvanianefflock.com/Catalogs/National_Cabinet_Locks.pdfComiX. NATIONAL Numeric Keypad Provides authorization with aPINcode of variable length

ComiX.NATIONAL

Numeric KeypadProvides authorizationwith a PIN code ofvariable length.

El-2004-KPU

27900Magstripe CardDesiqned fa r secu reconfi rmation s wi thexisting mag stripecards, includingcred it cards.

El-2004·MSU

35200Prox ReaderJust wave the cardand enter.

EL-20 04·IPRU

54300Call for your specific application andpricing.

eLock ·CompX eLock is a highly engineerd electronic lock with •a motor-driven tatch.Its uncompromising lock controlelectronics includes a non-volatile memory that stores •250 user/supervisor codes and audittrail. With optional 0

LockView™audit trail software, cornpx eLock remem- •bers 1500 access attempts IProgramming is simple •with numenc Ikeypad or Windows™ based Lockvlew' •w~m. •

···

Magslripe/Keypad Dual SystemMagstripe card and numerickeypad for dual control.

1EL-2004-MSKP·U

35600

IProx Reader/Keypad Dual SystemProx reader and numericIkeypad for dual control.

elock w/Temperature Monitor

EL·2004-PRKp·U

54600

The 1st and Only Product to ProvideSecurity & Temperature Monitoring

The CompX el!ocl{'8wl!h temperature monitoring is theonly product that offers security and 'the ability torecord temperature, complying With all Joint Commis-sion requirements.

• Allows secure access using existing credentials andbadges" Use on refrigerators, freezers, warmers and more'. Easy to install, battery operated• Programming can be done manually or throughopnonal LockView Software®o Monitors internal temperatures from -400 f to1220 F (-400 ICto 50° C)• Provides programmable audit trails - charts, graphs,repo rts, etc.o Enabling/disabling audible alarm• Contains dry contact for remote rnonltonnq systems

The etock wITem-perature Monitor isavailable in 3 kits:

FEATURESSurface mountedAudit trail of last 1,500 access attempts with date,ti me, and user nameMotor driven latching mechanismLED status lindicators (red & green)"Jump Start" 9-volt battery ,power portAudible Alarm Bol! SystemDual credential access availableCompatible with 12 volt electric 'door strikesLow battery mdlcator4AA battery pack mounts remotely (two year battery life). Alkaline batteries recommended- notincludedAudible BeeperStandard RJ 11 communications port

EL-Kp·TEMP 971.00Temp. Monitoring Refrigerator IKit - Keypad

El·MSKP-TEMP 1,092.00Temp. Monitoring Refrigerator Kit - Magslripe/Keypad

EL-PRKP·TEMP 1,260.00Temp. Monitoring Refrigerator Kit - Proximity/Keypad

CompX eLock OPTIONS• Power Pack (120V or 230V)• High decibel alarm boxo IDual latch control system• LockViewTMsoftware• Solenoid Latch• Through door mounting available• IRJ11I USB converter for LockView™

Windows ™ software• Electric Strike• 5·Minute lockout after multiple invalid attemptso Embedded Secu rity Data:

·Serial number-Two reset codes to delete supervisors and users-Pass code prevents unauthorized LockView' usa-User and supervisor codes (250)

el.oek For AppliancesSimifarto the eLockwith tempera-ture monitoring, the eLock Ikit for~appliances mounts externally ~nd"i:-- .can be used m almost any apPhca-_J~ ---;,!lion· pharrnactes, nurse's sta- ~ I

tions, research Jabs... wherever I' UI

access control and/or audit trail is ineeded. .bt.· _

EL-KP-FHKITRefrigerator Kit- Numeric Keypad

511.00

EL-MS·FRKITRelrigerator Kit - Magstripe Reader

586,00

EL-MSKP-FRKITRefrigerator Kit - IMagstripe/Keypad

621.00

El·PR·FHKIT 781.00Refrigerator Kit - Proximity Reader; HID

EL-PRKP-FRKITRefrigerator Kit - Proximity/Keypad

815.00

454

AskYourLocksmith.com Lancaster, Pennsylvania Phone 717-392-6333

Com/X,NATIONAL

'SC ADVANTAGESC Advantage cabinet locks can be masterkeyed todoor hardware using the Schlage'C" keyway, providingthe convenience of single-key operation.

Sizes: 111S' and 1 3/S" cylinder sizes in bright brass ordull chrome finishes

Keying Options: Keyed different, keyed alike, masterkeyed to schedule

Zero Bitted: 5 pin standard, 6 pin option

Accepts other manulacturers' compatible cylinders.

C9003'C9011

I, .f.I!P 17/3>'

,L Ill"" Door application 1

Code Finish Installation Boll Cylinder Boll!ype Lel1illh Travel

NAC9001·26D Dull Chrome Drawer Dead 1 118" 1"NAC9001·3 Polished Brass Drawer Dead I 11B" 1"NAC9003-26D Dull Chrome Door Dead 1 118" 1"NAC9003-3 Polished Brass Door Dead 1 118" 1"

15115Ot

ll11/8"

_I

NAC9009-26[) Dull Chrome Drawer Dead 1 ,3/8" 1"NAC9009-3 Polish ed'-B rass Drawer Dead n/8" 1"

NAC9011-26D Dull [Chrome [Door Dead 1 :318" rNAC9011-3 Polished Brass IDoor D~ad 1 3/B" 1"

.~-

:iJIC9001'C9009

~, j-I 1!4-~,--< -I

l1J64~ w'• )····13/8·--;;-!--11/8---'

I .

I i

•

i"4'1"--;-1-13~'" 0_L _.

r-$~$ r1 ;116" "lll-

I 0 0 ~,;~ 17/32' I - 19/16'ro i-

D"""" application

Keying Alike Codes: '101, tl 02 and 0 bitted (non-bitted)Packaging: Supplied with [(2) keys, (2) strikes, (2) spacers and mounting screws. LC ("Less Cylinder") locks do not include keys,

DUAL Axess KEYlESS CAM LOCK·10,000 possible combinations with key override• Replaces any standard cam lock to get instant keylessaccess-!Retrofits into existing 3/4" wood or metal mountingholes - no need tor drilling or modification• Small profile tits most door and drawers• Two access modes: combination or key- Combination secure - can only be changed with theproper key and current correct combination• Removable lock IPlug for easy rrekeying• Master keying standard,. Heavy duty die cast construction,Available cylinder Ilengths: 7/8" & 1 3/8"

NAD8D3D-197/S"S/S"3'6010

OS770087710877233.99

NAD8D3H91 3/8"11/8"36010

DS770OS771OS77233.99

'[_L..... - .....--.l-r-t-'

.710<J-· ------"'I..J .I--ll5Hmfl::iI-RllHIlr-_•.•••_\,,\.,..J

Hush drawer appllcatlon19/32"

Reoommended Hole location

~

for Door.or Dr.lWerAp:IIC;ltions

1.420" Drawer~_ _ ',.:t. t Application

lL-_71_ ~-1.42Q-.j DOQr

Application

Recommended Mountlng Hole Sizes-~.6S5 min f-.-

GII-I~fG-~ -0.760 min 1- 03(4

't ~ fMe-tal WOOd

ICylinder Length!Maximum iMal. Thick.MKKA CDdes*MKKD CodesCase Qly.Key IllankPlug Removal KeyMaster KeyPrice

• Key Codes: DA10S, OA120, DA124

,140-'

1.42W

I-l--t+-'---"'----' i'-*- -1.250"--

, I ----2.500· -_. --.;

ENCYCLOPEDIA OF LOCKSMITH SUPPLIES455


CbmiX..NATIONAL

• CYLINDER CAM LOCKS• Brass Pin Tumbler ,. Die Cast Pin Tumbler • Disc Tumbler

BRASS PIN TUMBLER CYLINDER CAM LOCKS DISC TUMBLER IFILE CABINET LOCKS

~rr~ Application· For drawers, RH. or L.H. Application· Used linternally IOn filing cabinets to gang lock drawers.

door, NAC8i03 and NAC8109 for lipped Operation· !Key removable lin locked position.construction; the balance for tlushapptl- Keying - Keyed only to "Pundra" keyway, P141A when ordering KA.

'l~ .\ cation. Packaging· Suppllied with two keys.FLUSH

~I~'Gparahnn- 900 cam turn; key removable

CB10~in both locked and unlocked positions.-. ()Keying· Will key together with all otherC8106 ,,-t. NACS100 senes locks. Available Keyed T - - - Ii' -J1C810S rr l ~ ---.33 H'>-

,- 1-, 1e rDifferent(S50 changes). Master Keyed l-1 ...~O<{r--~-' II. 1~0iI, I . ,

l& ,ro Different GM 1(650'changes). ~-(f])"CJ ¥ (iJ Vi' 1- I,. -j t r 3'1

Packaging - 10 in a box. Supplied with rt~;;:~,-I ;, itijtwo keys; trim washer, 'spur washer for J: l Fiwri LOO; 6J~ __ •• _)_ ....•._ ~NOJirswn-t~..,o(\ 1_._. ,

wood; flat washer for metal; and two cams J' 16 kAJ'!-£AD:5c-rctw'7 L 1- ,:--!L1PP,EOI tor all three applications. -,.

OVERLAY Key .Blank - 04291. RE"PLACEMENTFORC8103 "SHAW WALKER"C8109

IMK 2260 10 2039 .'

--Code Finish Type of Cylinder MaximumMounting Length Malerial ca047

ThicknessINAC8101-260 Dull Chrome ILipped 15116" 5/S" C8046

INAC810H Satin Brass Lipped 15/16" 5/S"INAC8102·260 Dull Chrome Flush 1 1/6" 3/4'INAC8102·4 Satin Brass Flush 1 1/16" 3/4"NAC8103-26D Dull Chrome Lipped 1 3/16" 7/8'NACB103-4 Satin Brass Upped ~ 3116' 7/B" Code Finish Boll Boll PriceNACB106·26D Dull Chrome F.lush ~ 7i16" 1 1/S" Type Travel

~B.106·4 Satin Brass Flush I 7/16" 1 i/S" NACB046-26 Polished Chrome Spring 1/S" 15.29NACB10B-26D 'Dull Chrome Flush 1 3/4" 1 3/S" NACB047-26 Polished Chrome Spring 1/S" 39.63NACB10B-4 Satin Brass Flush 1 3/4" 1 3/8';NACB109-260 Dull Chrome Lipped 13i4" 1 1/2"NACB109-4 Satin Brass Llipped 1 3/4' 1m" Code Finish Cylinder Max. Mal. Price

DISC TUMBLER CYLINDER CAM 'lOCKSlocks furnished with length Thicknessstraight cams assembted NACCs051-14A Bright Nickel 7/16" 7/64' 6.36

/"

~

(>--) NACB051·3 Bright Brass 7/16" 7/64' 6.74,-j, 1~i< 1 I NACB052·14A IBright Nickel 5/S" 15/64" 6.36I~

1 r••••••••1

~:

1 1 I IIIt NACB05?·3 Bright Brass 5/8" 15/64" 6.74

"'''' 1;.~•• ""' ••• 0 NACB053-14A Bright Nickel 1 3/16' 7/S' 6.36',.11 !£ ~ f~I{(I~)]STNACB05J.3 Bright Brass 1 3/16" 7/S' 6.74

NACa053-4G Antique Brass 1 3/16' 7/8" 6.74

'II ,!~,l ~O?4·14A Bright Nickel 1 5/16' 5/8" 6.36~~ . ,8 Sr' FOMH:DCMl FORIo4£DCMI

I I ,,, •••orr~ I I ."..",orr NACB055·14A Bright Nickel 1 7/16" 1 1/S" 6,36ca051 C6052, C61053ca054, csoss

Z c..,~ 2" CIJ,I NACB055·3 Bright Brass 1 7/16" 1 1/8' 6,74NACa055-4G Antique Brass 1 7/16' 1 ~/8" 6,74

Application -'For drawers, R.H. or L.H, doors with erther1lippedortlush construction. NACa060·14A Bright Nickel 1 3/4" 1 7/16' B_95Operation· 900 cam turn; key removable in both locked and unlocked positions. NACa060·3 Bright Brass 1 3/4" 1 7/16" 9.28Keying· Will key together wilh all other NACBOOOand NAC8700 series cabinet locks; NAC8060-4G Antique Brass 1 3/4" 1 7/16" 9.2Bexcluding NACB062. Available Keyed Alike (6 key codes), Keyed Different (200

_~_~Ca073-14A Bright Nickel 1 3/16" 7/8" 6_36changes) and Master Keyed Different E41A (200 changes).NACB073·3 Bright Brass 13/W 7/8" 6.74Packaging - 25 in a box Supplied 'With two keys; trim washer and spur washer for

wood; and two cams. NACB073-4G Antique IBrass 1 3/16" 7/S" 6.74-Key Blank -IDS7S5. NAC8075·14A Bright Nickel 1 7i16" 1 1/8" 16.36

NAC8075·3 Bright Brass 1 7/16" 1 1/8" 16.74

456


• GYLINDER CAM ILOGK• Disc Tumbler

CbmiX.NATIONAL

• PIN TUMBLER MAILBOX LOCKS• Multi-Gam

REVERSIBLE OPERATIONDlSG TUMBLER GYUNDER GAM LOCK

986 ea.

Application - For drawers, IR.H.orLH. doors with either lipped or flush construction.Operation - 90;dg cam turn; key removable in both locked and unlocked positions.Keying- Reversible key operation. Available Keyed Alike(1 keycode-SX1) and Keyeddifferent (100 changes).Packaging - 25 in a box. Supplied with two keys; spur washer for wood; and twocamsKey Blank - 08777.

OVERLAY

REVERSIBLEKEY

Code Finish Cylinder MaximumLenglh

NAC8062-14A Bright Nickel 7/8" 9/16"Lock furnishedwilh slraighl camassembled

PIN TUMBLER '''MULTI-CAMTM MAILBOX LOCKSAPPLICATION - Interior architectural Ii~tmall boxes used in apartments, con- __dominiums, schools, lobbies. Nut ~ - Am.,I",". '.mounted. 00']"" '

OPERATION - 900 counter-clockwise ~x_ ,_

cam turn to open. Key removable in AUlhEI.et"e';;;;'-:;;fi~ W 'ilocked position only. J-f...~KEYING· Available keyed differently ~:I ~ "-

only (Wo changing) , .J ",0'''''<0l0li9PACKAGING -Supplied with selection . •of five cams, two keys, mounting nut • ~ f8nrl r~m ~p.rRw-1 .635 r' cmo, .

I MIN.1__ MOUNTING

C--J,---,-----r HOLE FOR BQniml!lr Indu3trht~

. .760 ALl LOCKS•. M~ 801

Colle Iinsiallalion Direction of TurnTo Open

NEW POSTAL LOCKS

NAC8730 ArchitecturalMail Box Fronts

900 clcw• Stainless Steel Plug• 12° taper on cylinder head• Now able to accommodate up to 3/16· stem• Drain holes on the bottom or the cylinder• Will include spring clip, mounting nut and (3) keys

C9100 operates clockwiseC9201l operates counter clockwise

C9100 ships w/o acam for replacement of locks for new Standard 4Cboxes shippedonly to USPS

APNICATION - Exterior pedestal-mounted neighborhood boxes. Haskeyway dust shutter for lock protec-tion. Clip mounted. I

OPERATION -900 clockwise cam turnto open. Key removable lin locked po-sition.KEYING - Available keyed differentlyonly (1 00 changes)PACKAGING-Supplied with aselectionoffivecams, three keys, mounting clip.cam nut.and lock washer.

NAC8735Door Of PedestalMounted NeighborhoodMailboxes

Directiontn Open: 90° cw

Packed 25 per box.Bright Nickel Finish.KeybJank - D4292.

1016

NAC9100NAC9200

12.64 each12.64 each

25/box25/box

NEW USPS KEYBLANKS• 2 keyways with 1000 changes each

NAD4300NAD4301

Std. KeywayReverse Keyway

1.261.26

50/box

457ENCYCLOPEDIA OF LOCKSMITH SUPPLIES


Comj)(,NATI,ONAL

NAC87H1Bommer Industries

NACB7~4American IDevice

• MAILBOX LOCKS• IPinTumbler 662 lea.

NACB711Bommer Industries

NACB719Miami-Carey

NA871BCutler MailChute

802

~r//,MATL

Qn~~,,-,j- -II} 1-

'L"'--I \ '"~!2~ \

/,4 9(l~CW

~

NACB722Dura Steel XL-202 NACB723

Jensen General

NACB712Bommer Industries

ljt .~L II wcw

I 1..'-"I , •

.~-ft MAl'L-..1 L

NAC8716S.IH. Couch

NAC872DDura Steel

NAC8724Bommer Ind.

458

EJ!-. •.•AT.L

II I

.. - -,

" \'..>---;) I I

[' 90"'CCW ~4)ul ,,-".....)2. _31

NACBH3Auth Electric

NAC8717Nutone

NAC8721Permbil XL-201

NAC8725Cutler Federal


Com/X,NATIONAL

• DOOR AND DRAWER lOCKS• Pin Tumbler • Disc Tumbler

PIN rUMBLER DOOR AND DRAWER LOCKS"ADVANTAGE PLUS"

~)~ .r ICB173, B175

The PLUS feature allows you toremove the cvlinder from ourpin tumbler locks while the lockremains in place. Simply use a'5/64" allen wrench from the backto remove the cylinder and plugfor re-keying.

Application - Surface Mounted. For drawers, R.H. or Ui. doors. Requires 7/8"tdiameter hole forthe cylinder.Operalion - Key removable in both locked and unlocked positions; except NAC8139.Keying - Will key together with all other pin tumbler locks using 104291 key blank. Available Keyed Alike, 260finish (4 key codes), 4 and 4G finish (2 key codes). All finishes available Keyed Different (850 cnanpes) andMaster Keyed Different GM 1(650 changes).Packaging - lOin a box. Supplied with 1Wo keys, strike and mounting screw.Key Blank - D4291

2661 ea.

CB177,B178, 8179

Code Finish lnstallatlon Bolt Cylinder Boltifv~e Length Travel

NACB173-26D DullCnrorne Door Dead 718'" 3/4'NACB173-4 Satin Brass Door Dead 7/8" 3/4'NACB173·4G Anti q ue Brass Door Dead 7/8' 3/4'NAC8174-260 Dull Chrome oo or Dead 1 1/8" 3/4'~.

[Door 3/4'NAC8175·260 Dull Chrome Dead 1 3/8"NACB139-260* Dull Chrome Door Spring 3/4' 7/32'

NACB178-26D Dull Chrome IDrawer Dead 7i8' 3/4"NACB178-4 Satrn Brass 10 rawer Dead 7/8" 3/4"NACB17B-4G Antique Brass Drawer Dead 7/8" 3/4"NAC8177 -260 Dull Chrome Drawer Dead 1 1/8" 3/4"NAC817g·260 DUll Chrome 1J-rawer Dead 1 3/8' 3/4'NAC817g·4 Satin Brass Drawer Dead 1 3/8' 3/4"

Packed ~a per box,* IKey removable in locked position only (not "Advantage Plus") 39.16

DISC TUMBLER DOOR DRAWER lOCKS

lr'l~lf'-:'f1- -, .,~~ "4~ .

'-"'\---< 8706

~

MOUNTINGIHOLE

g.'l...!l87038705

Applicalion - Surface Mounted. lFor drawers and doors. ReqUIres 7/8" diameter hole for cylinder,Operation - Key removable lin both locked and unlocked positions.Keyed - Wi II key toge therwith all other NAC8000 and NAC8700 se ries locks; excludi ng NAC8602. Ava! lable KeyedAlike: NAC8703 and NAC8704(6 key codes), NAC8705 and NAC8706(3 key codes)' Keyed IDifferent; (200changes), and Master Keyed different E41A(200 changes). NAC8706 is not stocked Master Keyed,Packaging - 25 peroox. Supplied with two keys and mounting screws; with strike furnished with NAC8706lack.Finishes: 14A· Bright Nickel; 3 - Bright Brass; 4G - Antique BrassKey Blank - D8785.

Code Installation Boll Cyl Jiiii'flr Boll Pricelype Teifjjll1 Iravel

NAC81103·14A Drawer Dead 15i16;~ 11/32" 8.76h ..~------

Drawer Dead 15/16' 11/32" B.9a-NAC8703-3NAC8703-4G Drawer Oead 15116" 11/32" B.98

NAC8704-14A Door Dead 15/16" 11/32' B.'98r-,;rACB'704=-3 Door Dead 15/16" 11732" ~:.2~_NAC8704-4G Door Dead 15/1 s: 11132:- 9.25

NAC8705-14A Drawer Dead 1 3/16" 11/32" 9.29INAC8705-3 Drawer Dead 1 3/16" 11/~2" 9.58

~7D5.4G Drawer iDead 1 3/16' 11/3";]" 9.58

I NACB70li-3 Spr'rng 9/32" 11.07Drawer

INAC68D3·14A Drawer IDead 15/16" 11/32" 8:.~'NACB8D3-3 Drawer Dead 15/W" 11/32' 8.40

NAC88DHG Drawer Dead 15i16' ~1/32' B.4D



CDmiX,NATIONAL

LEVER TUMBLER DOOR LOCK

~~ 1~fir-H O~lQl "'1T !i IMOUNTING:...:::::..r.

C3422 -ItCo- HOLE

Applicalion - Surface Mounted. Hole required for cylinders. NAC88422 is used ondoors wilh narrow stiles, such as display cases with wood frames.Operation - Key removable in both locked and unlocked positions.Keyi ng - Keyed Alike.[Packaging - 25 per box. Supplied with two keys, mounting screws.

o e Installation

NAC8422-3 'Door

DISC TUMBLER DRAWER ILDCKS

8701MOUNTING

HOLES

460

8896

0"" :,~1&8MOUNTING

HOLEApplication - Surface Mounted. For drawers. Requires 7/8" diameter hale tor thecylinder.Operation - Cylinder removable from front of lock while lock remains in placeKeyrernovab le in both locked and unlocked positi ons.Keying - Will key together with all other NAC8100 series locks. Available KeyedAlike(4lkey codes), Keyed Different (850 changes), and Master Keyed different GM (650changes).[Packaging - 10 in a box. Supplied with two keys and mounting screws.IKey Blank - 04291.

Inslallation Boll Cylinder BollType Lengtll Travel

Drawer Dead 15/16" 11/32'.........,:,;;;.;m~~-I-~~~~f--i;i-O;..:;ra;,w;; .•••er---+...;;D,.;;e,;;;;ad;;.-~15716" 11/32'

C8161 C816DPIN TUMBLER REMOVABLE CYLINDERs-cm. Removable cylinder for [NAC8161housing. Packed 10 per box.NAC8160-26D 37.58Dull Chrome

HALF MORTISE DRAWER LOCKHOUSINGHas interchangeable cylinders.Packed 10 per box.NACB161-26 18.70Bright Chrome

Application - For drawers with NAC8701 for center drawers IOf metal desks. Fitsspecial piercing of drawer and selvedge. NAC8896 is a specific replacement lock.Opera lion - Key removable in both Jacked and unlocked positions.Keying - NAC8701 will key together with all other NACBOOOand NAC8700 serieslocks; excluding NAC8602. Available Keyed Alike; NAC8701 (6 Ikey codes),NAC8S96 (1 key code): Keyed Different; NAC8701 (200 Changes). NAC8896 (50Changes). NAC8701 Is available Master Keyed idlfferent E41A(200 chances).Packaging - NAC8701, NAC8702 • 25 per box; NAC8896 - 10 box. Supplied withtwo keys and mounting nut for NAC8701 s.Key Blank - 08785.

--:-Cooe Installation Boll Cylinder 'lIolt PriceType Length Travel

NACB701-14A Center Drawer lnsertable 19/32" 11/32' 12.88ot Metal Desks Dead Bolt

NAC3896-26D Desk Drawer Dead IBoit tl/2" 5/B' 31.91


ComiX.NATIONAL

'. FILE CABINET• PIN TUMBLER KNOB LOCKS

• pm TUMBLER SLIDING DOOR• PIN TUMBLER LOCK INSERTABLE [BOLT

P,INTUMBLER LOCK INSERTABLE BOLT PIN TUMBLER KNOB LOCKS[ rfJ MOUNTING HOLES

~~1~~r:~r~,"~OF lOCK

Application - For center drawers of desks. Fits specialI-{--J III piercing of drawer front and selvedge. tV~~DRAWElfRONI )"

Operation - Key Iremovable in both locked and unlockedpositions. \ J 1 ISELVEDGE 7 Keying - Will key together with all other NAC8100 series l'-V ~~gJ'f--la'-.1 l·,r Il.H. Door IR.H.Door

~¥, locks. Available Keyed Alike(4 ~ey codes), Keyed Differ

~ 5738 ea.ent(S500 changes) and Master Keyed different IGM(650J,~. .1_ changes). MOUNTINGHOLES

.~~~ Packages -1 0 per box. Supplied with two kevs and mount-Ing nut. - Application - For metal cabinet doors. Reversible for R.H. m l.H. application.

MOUNTING HOLEE Key blank - D4291. I lLatch plate lis for either 2 or ,3-point latching.Operation - 9D;dg turn at open. Choice IOfIkey Operation.

NAC8137-BOLT

2326 e,~ t~Keying- Will key together with all other NAC8100 locks. Available Keyed AlikeReplacement Bolt Only (3lkey codes) and Keyed Different (650 changes).3.25 Packaging - 10 lin a box. Supplied with two keys and a latch plate.

Key Blank - 04291.

Code Installatlen Boll Cy~mlter Boll code Key Operation MaximumType Lengtll Travel Material Thickness

NAC8137-260 Metal Drawer Insertable 19/32" Dead Bolt 7/16" NAC8154-26D Key IRemovable in both 1/B"1/4' Maximum Locked/Unlocked PositionsMaterial Th ickn ess NAC8155-26D Key removable in Locked Position Only 1/8"

PIN TUMBLER HALF MORT'ISE PIN TU~ER SLIDING IDOOR, FILE CABINET LOCKSDRAWER LOCK---l"""T'a ..--... ~-~ ...

~-,~--~1 .:.. l~'l)I ....~r I""'P

I'l~~ 8142 ~~

,6150; u illl.~ .jt,~"--i ~

8140 Ibl~.) ~ .-4 11

~

in i'+~jU j"J au'"

~;;J I~8143

l'~~r4

8131 8133, 8135 ~ ~.~3916 ea.a MOUNTING HOlE AppNcalion - For sliding doors, both of plate glass and wood, NAC 8142 requires

571540JA. Additional Mortise a 7/8" diameter hole for cyllnder. NACS150 is used internally on lfiling cabinets torequired lor mounting. gang Ilock drawers,

Operation - Key removable in locked position for NAC8140 and NACS150. Keyremovable in both locked and unlocked positions for NAGS142,

Application -For drawers. Half mortise type requires mortise for housing and 7/8" Keying - Will key together with all other NAGB100 series locks. Available Keyeddiameter hole for cylinder. Alike: NAC8140and NAC8143(4 key codes). NAC8142(6keys codes) and NAC815(5Operation - Key removable in both locked and unlocked positions.except NAC8131. key codes), Keyed Different; NAC8140 and NAC8142(25 changes), NACS150(850Keying - Will key together with all other NAC8100 series locks. Available KeyedAlike, Changes). NAC8142 is available Master Keyed different GM1(650 changes).(6D finish(4 key codes) and 4 tinish(2 key codes). Both finishes available Key Packaging -10 per box. Supplied with two keys. NAC8142 is furnished with strikeDifferent(B500 Changes), 260 finish available Master IKeyed different GM1 (650 and mounting screws.changes). Key Blank - 04291.Packaging - 10 per box. Supplied with two Ikeys, strike and mounting screws. Code Installation Boll Cylinder Boll IPriceKey Blank - 04291. Type Lengtll Travel

NACB140·26'D Plate Glass Interal 35.58Code Installation Bolt Cylfnder Boll ,sliding Doors Spring B~t._

Type Length Travel "'NACil142-26D ."-'.- 11/s-::- "7716' 38.75,sliding Doors Plunger BoltNACB131·26D Drawer Spring 77a-;f-- -7732';--- NAC8142-4 'Sliding Doors Plunger Bolt 1 1/8" 7/16" 38_75NACB131-4 Drawer Spling 7fff' 7i32" NAC8143-26D :Sliding Doors Plunger Bolt 1 3/S" 7/16' 38,75

r-NifCili33-26D Drawer Dead 7/8" 1/4' NAC8143-4 Slidmg Doors Pllunger Bolt 1 3/8' 7/16' 38,75NAC8133-4 Drawer Dealj 7f,j' 1/4' ~'8150-26D IRIing Cabinet Round Spring liS:-- r-2ri38NAC81J5-26D Drawer ueao 1 V8" fi4' Action



CDmiX.NATIONAL

• IOISC TUMBLER GANG LOCK• 'DISC TUMBLER HANDLE LOCKS

DISC TUMBLER GANG LOCK

Cylinder ISlocated near topof pedestal

'Saddle reversesfor mortiseapplication.

NA08090-14ANAD8[]9[]-3NAD8090-4G

2509 ea.

Additional 7/8" x 1/8"deep dado for barrequired on insideof panel.

OIDIAMOUNTING HOLE

Bright NickelBrig ht BrassAntique Brass

Application - For locking drawers in desk pedestals and other multiple drawerapplications. Requires a 7/8" diameter Ihole for cylinder, and a dado for bar,measuring 7/8" x 1/8" deep on inside of panel.Operation - Key.removable in both locked and unlocked positions, Turning the keylocks all drawers simultaneously(drawers must be closed), Bar moves studs Intonotch in drawer or slide, preventing movement.Keying - Will key together with all NAC8000 and NAC8700 series locks; excludingNAC8502. Available Keyed Alike(6 key codes), IKeyedDifferent(20D Changes), andMaster Keyed different E41A(20 'Changes).Packaging - 5 ,per box, Supplied with two keys, three each stud slides and Ilockingstuds, mounting hasp saddle and mounting screws.Installation - Desk pedestals or similar multi-drawer conditions,Bolt Operation - Dead locking.Cylinder Length -15/16"; BoltTravel-11/32'.Key Blank - 08785.

,Application-For metal doors on lockers and cabinetsRrl.anu Ll+Both NAC8756 andNAC8757 will fit spindles, except NAC8747 which has an 8-32 tapped end hole,NAC8749 will accept only the NAC8757 'longue. Spindle can be cut to lit specialrequirements.Operation - Key removable in both locked and unlocked positions.IKeying • Wililkey together with all other NAC80DO and NAC8700 series locks:excluding NAC8062, Available Key Alike (3 key codes), except NAC8747 andNAC8749(1 key code); and Keyed Different 1(200changes),Direction 01Turn to Open - 900 c/cw.IKey Illank - 08785.Packaging - 10 per box. Supplied with two keys and mounting Ibolts.C e DeSciijliion ounhng p n e

T pe LenglhLocking Rear 1'Square 25:-'1"1

IDISC TUMBLER HANDLE LOCKS

"o."O"'''~ "",u"'~~~OJIo<.ON 1l~ ';SClJII)'I[ON .''''.:

HANDLE .MOUN-lINGI

'-- OPE"4TION ..-/

lEn HAND RIGHTHA"NC

Locking P.ear 4" Square 25.11Locking Rear 1 'Threaded 25.11

;-'.-;~+-rL~oc~k:O:I.n"'-g--+~Re:':a:;"'r---+-S"Th reaeded 25.'11

'rice

Non-lockinq ear 3" Threaded 22.45=;;-;;-;=-+-<-.o"""'ck""in-g-"'-+-Escutcl1 eon 1" Threade 25.11

Locking Escutcheon • hreaded 25.11

462


CDmj)(,NATIONAL

• DISC TUMBLER • 'GARAGE DOOR LOCKS• Circuit Breaker Cabinet • Handle Lock Parts • Window Lock

PARTS FOR IDISCTUMBLER HANDLE taCKS

1C8756

MOUNTINGHOLE

SINGl'E POINT iLATCH TONGUESide mounted, set screw. Zinc-plated.25 per box.NAC8757-2C 3.97

THREE POINT !LATCH PLATE WITH TONGUEUsed with locking bars, Hex nuts with lock washersthreaded on spindle. Zinc-plated.NAC8756-2C 5.'08

DISC TUMBLER DOOR & DRAWER l!QCK w!flexafunctionApplication - For doors and drawers. Surfacemounted. Requires a 3/4" dia. hole for cylinder.Operation - Choice of either 900 or 1800 cam turn.Key removable lin both positi ons.IKeying - Wi II key together with all oth er disc tu mble rlocks using 08785 key blank. Masterkeying to E41A.IPackaging - 25 per box. Supplied with two keys, twomounting screws, two formed cams and two stopwashers. Cams unassembled.IKey Blank - 087B5.·irn>m'kJ iJ1-" /,~e cor ••fo< i t> -4' i B.right Brass '"8:22 Operation - Turning key releases mechanlsm, unlocking

L 't....J I An'tique Brass 8.22 door. Handle turns down to vertical position, Turn handle~ ~::.2.~ .....!:=============~to horizontal to lock door. Key removable In both locked

and unlocked positions.Keying- Keyed different only. 10 changes.Packaging - Handle supplied with two keys. Mechanismfurnished with mounting screws.Aplicalion - For mounting on sectional over-head doors.Factory assembled for right hand mounting: mechanisminstalls at right 'side of door to lock into track (insidegarage). Handle is installed over mechanism on outside ofdoor. Handle replaces Overhead Door locking handles.Units can be reversed in field for left hand application.

DISC TUMBLER CIRCUIT BREAKERCABINET ILOCK

Application - For right handed metal door ofelectricalelrcuit breaker cabinets.Operation - Key removable in both locked andunlocked positions. Push plate operates spri ngbolt. IUnlocked, push acts as spring latch.Keying· Keyed Alike only.Packaging - 1a per box. Supplied with twokeys; no mounting hardware.Type 01 Mounting - IR.H. Door.Boll Type - Spring; Bolt Travel- 7/32".Key Blank· 08786.

NAC8070-2CZinc Plated

GARAGE DOORMECHANISM - LOCKING HANDLE

•

LMOUNTING HOLESFOR HANDLE

Finishes: 2C - Zinc-plated; 26.Packaging - 5 per box.Key Blank· 08785.

ICode Installation Operation Description PriceNAC879B·26 Outside 'Door Key releases 3 1/8" spindle 42.40

over mechanism mechanism-Handlelocks mechanism

NAC8797-2C Inside Door SiliC!ingBaM 2 .4 bolt 26.78near track locks into track mechanism



Comtx.NATIONAL

• FURNITURE lOCKS• lOCKER lOCKS

• CHEST/LID tOCKS

FURNITURE lOCKS

C8252

C8414Application - Lid locks for cedar chests and other lid locking requirements.NACB412 is surtace mounted and requires a 9/16" diameter hole for the cylinder.NAC8384 requires 11/32" wide x depth at lock full mortise, plus mortise forselvedge, plus a hole for key entry.Operation - Key removable In both locked ano unlocked posrtions. C8412 usespushbutton to release lid when lock IS used as a latch to keep llid closed, but notlocked.Keying - Keyed Alike.Packaging - 25 per box. Supplied with one key. Appropriate strikes and mountingscrews are supplied with locks; additional keyhole escutcheon furnished withNAC8384.Key Blank - NAC83B4: 08890.

NAC8412: 08191.Code Finish Installation Bolt Boll Price

Type TravelNAC8207-3 Bright Brass RH. Door, 10rawer, Dead 3/16 12_60

Full MortiseNAC8252-3 Brig ht IBrass R.H. Door, Drawer, Dead 3/16' 10.82

Full MortiseNAC8253-3 Bright Brass L.H. Door, FUiIM'ortlse Dead 3/16" 10.82NAC8826"3 Bright Brass Door/Drawer, Dead 21/64" 7.89

'Surtace Mounted

C8253

C8207

CHEST/LID lOCKS

C8384

OW"'lOW

Application - Primarily for furniture and other fine cabinetry. NAC8B26 is surfacemounted and requires a hole for key entry. All other locks require lull 11/32" x depthof lock. Additional mortising required for lock selvedge plus hole for key entry.Operation - Key removable in both locked and unlocked positions.Keying - KeyedAlike.Paekaging- 25 per box. Suppliedwith one key.All locks, except NACB826,aresuppli edwith strikes. Key hole escutcheons are packed with NAC8207 and INAC8826.Key Btank· 08890.

C8826

Code Finish Installation Boll Cylinder PriceType Length

INAC8384-3 Bright Chest, lid Hook 15,86Brass Full Mortise

NACil4T4'-4!} Antique Chest, Lid Internal 7/8" 18.79Brass Surface Engages Strike

Mounted

"THE ADVANTAGE IPLUS" Pin Tumbler moor and Drawer Cam locksThe locks are fastened in place with two screws for easy installation. Re-keying or servicing is accomplished --'---"";~\Vd~---'by removtng the cam retaining screw and cam. Use a 5/64" allen wrench to remove the plug cylinder j I 1 ,>assembly. The mounting plate remains installed on the cabinet IRe-keyas required and reinstall cylinder plug .''C:\.. I, "assembly on mounting plate. I "\!J.ll:8 I, IKey blank: 04291. Satin Chrome Finish. Available master keyed, KD and KA. Il 'h' J:LAPPlICATlON- For drawer, R.H. or L.H. doors. PACKAGING-SuppHedwith two keys, extraC8183 assembled tor door function. C8188 backplate, two cams and two mounting 'Screws. Itassembled for drawer function. trim ring is required, order C2017 separately.OPERATON-90" cam turn, key removable in both Note: If formed cam is required. order C7113 orlocked and unlocked positions. C7116. O-=-P/""N,-....-----,--M:-::-ou-n.."ti-ng--.--""'IC"""y.,..lin-d-e"""r.....-""M,...ax...,.j-m-um---.-----"Q-ty..,...,/KEYING-Will key together with all other pin tumblerIlocks uSing 04291 key blank, except mailbox locks, Length Mal. Thickness CaseSee table for available keying. Masterkeying to GM1. NAC8183-26D IFlush 7/8" 7/8" 10

NACB188-26D \Clush 1 3/8" 1 3/8" 10

464


• PIN TUMBLER CAMS • PIN KEYING KITS• COOliER LOCKING HANDLE AND PLUGS

COOLER LOCKING HANDLE REPLACEMENT PLUGS

Operation - Key removable in both locked and unlocked positions. Handle may beused as a latch until locked by key.Keying - Keyed Alike to XC-3.Packaging - NAC8764. NAC8763, NAC8762 - 25 per box. NJ and NAC8763plugs are supplied with two keys and :specific retainer. INAC8764 plug lis suppliedwith two keys, retainer/stop and screw.Bright Chrome finish. Key Blank - 08780.

PIN TUMBLER CAM Camsfor pin tumblercylindercam locks. All cams have

b·- dual application. seel~ble below

BI Off"'--I r

." 1:711l1 ,J::H-~ CAM • ~ ~ LEr~.Joe. iru'N s I ) i ,U·/oMV fACE A LOCK !:: Tl).RN

YfAc:t:

~- C7104 7105f'

It",""r~MI..·i'(;.~IWI

C71~ CZ102~I ~" "",,,.'bC8762 C6763 [ I ,,~ l~.· < :C.

1:8764 WCode Installation

C8065 o900 1800

withflexafunctionHI

PIN KEYING KITS PIN TUMBLER KEYING KIT100 ea. 1:2,3 and 4 10rivers100 ea. O. 1.2.3.4,5,6,7.8. and 9 Tumblers250 Tumbler Springs100 Tumbler Retainers50 ea. G3735 and C3738 Plug IRetainersNAV70P-111271

PIN TUMBLIERMASTERKEYING KIT100 ea. 2,3,4,5,6,7 and

BMaster DriversNAV70P-2

3224

Bolt Price For L H. Door andI-::-:=c::-::-::-::--I--:--:-_,..,........,.,..,..-=..,..,..".,,...,........,,..._-I--'-'Tyl,.',;p~e_-+-=-::-:---11 Counter-cl oekwise UseNAC8762·26 Early models. N.L. 59 1105 handles 12.51 r-::-....,....----,----:=--....,....:-:-----,---;-~::---.--;::-:--'-;;:---,NAC8763.26 N.L. 59- 1105 handles 12.51 Gode Description Length Price/Ea.INAC8764-26 CurrentNAC8765handles 12.51 NAG7102-2G StraightlCam 11/4" 1.20

NAc71ii3~2G Straight !Cam 1 US" 1.20iNAG71OS-2C Straig'htCam 3" 1.38For R.H, [Door and ounter-clockwise Use Packed 20 per bag. Zinc· PlatedICode Description Length Price/Ea.INAC7101-2C Straight Cam 1114" 1.20NAC7104-2C Straight Cam 3" 1.38

oun.e crme

SCREWDRIVER CAM LATCHApplication: For drawers or doors that do not reauire a key for lockingOperation: tlexatunctlon' feature provides choice or 900 or 1S00 cam turn. Cams aredouble punched for flexibility lin mounting latch.IPackaging: Supplied with two cams, two stop washers. spur washer and mountingnut.

525

Dty/Case

Gode Description Length Price/Ea_NAC7H 0-2C !Double Formed Cam 1 1/4" 1_72

I--:-:-NA~C:::7-:-11:-::3-:-2:-::C--+---::ID:-o-:ub~le-:F=-o-rm-e-:'d~rc-am-+-:-;15/8";-' --+---::"1.-=7:::"2---;

Gylinder Maximumlength Mat. Thickness

PIN Mounting

iNACa065-14A Lipped, Flush 5/8" 1/4' 25NAG7116-2G Double Formed Cam 15/8" 1_72or Overlay

DISC TUMBLER KEYING KIT1DOea. 00,22, ,44, and 66 Tumblers.--=....250 Tumbler SpringsNAV710-32482

DISC TUMBLER MASTERKEYING KIT100 ea. 02, 04, '06,24,26,40.

42, 46,160, 62 and 64 Tumblers250 Tumbler SpringsNAV710-4

4925

ENCYCLOPEDIA OF LOCKSMITH SUPPLIES465


Com/X,NATIONAL

DISC TUMBLER CAMS

i'lENGTH~ Of LOCK _1

ORIGINAL PIN rUMBLER KEYBlANKSBrass- Packed 50 per carton

!PIN TUMBLER BLANKS 4 PIN TUMBLER BLANK

C70DB

•••••••NAD42961.75 ea.

ORIGINAL IDISC TUMlBER KEYBlANKSBrass· Packed 50 per carton

5 PIN TUMBLER BLANK

~NAD429S94¢ ea

C7001 C7D02 C700S C7004STRAIGHT CAMS

OFf SET1fl-tOHOcr 1\'1'"

:JC7005 C7005 C7007

STRAIGHT HOOK CAMSSelection at cams that per-m it adaptio n of disc tumoo.bier cylinder cam locks tomeet nearly every applica-tion need,

Straight Hook Cams andDouble Formed Cams canbe reversed whp.n rr.nllimd

3 Pin TumblerINAD4290 W'-4 Pin TumblerINAD4291 W'-5 Pin TumblerINAD4292 W'-5 Pin TumblerINAD4293 w..1.12 ea.

IDENTIFYINGKEY BLANKSBlanks are listedwith related actualsize cross sectio n.Sight down the endotthe blankto iden-tify the cross sec-tion or profile.

4 0 ~C_TUMBLER BLANKS

NAD8780 U- 0NAD8781 uP"'" ENAD8782 ~ 'CNAD8790 u.. R

1.03 ea.

6 DISC TUMBLERNAD8787 U- DNADS788 ur- ENAD8789 ~ cNADS795 '""- NNADS796 ..,... M

NADS79S ,.,.. K

1..03 ea.

5 DISC TUMBLER BLANKSNAD8783 U- 0

1NAD8784 uP"'" E", ..,-:;:.,..,,; NAD8785 U\oo C

NAD8786 rv- 6NAD8791 u.. RNADB792 J..a- NINAD879S •••• MINAD8794 ,.,.. K

1.103 ea.

5 or 6 DISC TUMBLERREVERSIBLIE KEY BLANKS

T

INADS7771.0S ea.

OfFSET1 J~'"

-I 'JJ3l [LENGTH

G7013 C7009 C7014 i OF I OC~- G7Dl0 C7012 C7011DOUBLEFORMEDCAMS [SINGLE FORMEDCAMS

Code Descri lion Len lh Price/eaNAC7001-2C Strai ht Cam 3/4' 1.02NAC7002-,2C StraL ht Cam l' t,02NAC7004-,2C Strai ht Cam 2" 1.07NAC7005-2C Strai ht Cam 3" 1.15NAC7003-2C Strai ht Cam 11/S' 1.02NAC70US-,2e Strai ht Hooked Cam 1 1/2' 1.22NAC7007-2C Strai ht Hooked Cam 11(S" 1.22NAC7006-2C Strai ht Hooked Cam l' 1.22NAC7009-2C Double Formed Cam 1 3/4· 1.46NAC7D13·2C Double Formed Cam 1 1/8' 1.46NAC70H·2C Sincle Formed Cam 1/8" 1.46NAC7012·2C .?.ingle Formed Cam l' 1.46NAC7010-2C Sin Ie Formed Cam 5/8" 1.45NAC7014·2C Double Formed Cam 1 5/8" 1.45

Zinc-Plated. 25 per Bag

KEYSDie Cast '. Packed 50 per carton

FREEZER LOCK KEYS WARDED BARREL IKEY

I NAD":O1.55 ea.

466


Comtx.NATIONAL

• KEYBLANKS• CODE BOOKS

ORIGINAL !LEVERTUMBLER KEY,BLANKSPacked 50 ps r carton

FLAT LEVER TUMLBER BLANKS

INAD8191Steel'BO¢ea.

PARACENTRIC ILEVERTUMBLER BLANKS

INAD849DBrass2.63ea.

ORIGINAL MASTER KEYS

• DISC TUMBLER SLIDING DOOR

NAD8491Brass4.38 ea.

DISC TUMBLER SUDING DOOR LOCKS

Applicalion - For wood sliding coors.Reculres a 7/8' diameter hole in front doorfor cylinder.Operation - 9C8042; Push in cylinder, key turn engages bolt behind strike. C8043;Pushing in cylinder locks doors. Key removable in both locked and unlockedpositions.Keying - Will key together with all other discturnbler locks using 08785 key blank.Packaging - Supplied with two keys, strike and mounting screws.

rmf-.~~2 1~ : '\

.. J. -- '1 I,\~f..T~ ~II

C8042

IWT_~~, I.B. i . Ii1 . t - - 1\1.. i~ ,

C8043

BollTravel

PriceICOde Installation Boltlength

CylinderType

32:-2517.20

900 Turn HookPlunqer

7/8'l'

71W'7/16"

INAC8042-26D Sliding Doors~:"':""'-+-i~~~-=-4~-=---+~";"'--+-:--=-:~NAC8043·2BO Slidin,g Doors

""""'"04299

E

PIN Description Material PriceNA04299 Pin Tumbler GM! Master Key Brass 3.12

~A0a419 Lever Tumiiier 5LM Flat Master Key Sleel 3.12NAD6799 Disc Tumbler E41A Master Key Brass 3.12NAD69Q9 Disc Tumbler E13A Master Key Brass 3.12

KEY CODE BOOKS06001 Pin Tumbler KeyCodes - Includes the mostpopular National key codes:GMt series, GM2 series,GM2A series, GM300 series,GM600 series and GM700series.

NAD80011649

08001

08002

D8oo2 Disc Tumbler and Lever Tumbler Key Codes -Includes the most popular National key codes: standard4 tumbler snes, standard '5 tumbler series, standard 6tumbler series, 5 tumbler prefix RD series, 5 tumblerprefix GF series, 5 tumbler prenx SK and KS series, 6tumbler prefix SK and KS series and 5 lever tumbler'series all T.

NAD8002324

467ENCYCLOPEDIIA OF LOCKSMITh! SUPPLIES


Documents

ComiX. AskYourLocksmith.com Lancaster, Pennsylvanianefflock.com/Catalogs/National_Cabinet_Locks.pdfComiX. NATIONAL Numeric Keypad Provides authorization with aPINcode of variable length