-
Combined escape route and emergency fire luminaire
TitaniaBEGHELLI - ELPLAST,a.s. 2010Beghelli-Elplast has developed
new luminaire Titania, which fully meet valid directives for the
equipping of road tunnels. *
-
Luminaire Titania has been developed and designed in accordance
with the latest edition of RABT*Regulations for theequipment and
operationof road tunnelsThis combined escape route and emergency
fire light Titania helps to show vehicle passengers the fastest and
safest way out of the tunnel in extreme cases.Approved by German
Federal Ministry for Traffic,Building and Urban Affairs
-
According to the German Federal Ministry of Transport For all
traffic tunnels that are longer than 400 m must be installed with
emergency fire and escape route luminaire Titania*
-
TitaniaCombined escape route and emergency fire luminaires20
m1,2 m*
-
TitaniaSecond independent power supply from distribution
network
Independent source of electrical energy (generate by using
genset Engine-generator, a machine used to generate electricity
)and - UPS (Uninterruptible Power Supply Source, to allow time to
bringan auxiliary power source on line).
The norm establishes that when a tunnel suffers from a failure
of power supply, an emergency power supply system and an emergency
lighting system must be at hand.
Power supplyOperating voltage: 230V*Options
-
TitaniaThe body: Stainless steel 1.4571 Dustproof and waterproof
protection type IP 65 protected against water jet cleaning
Diffuser: 4 mm safety tempered glassPictogram size: 300 x 300 mm
according to RABT5 years guarantee*Technical features:
-
TitaniaSpecial gasket for IP65Terminal block 5x2,5mm2Higly
polishedreflector from ALTube clampsfor through wiring*
-
Bevelled edges(to avoid injury of running people during
accident) 474 mm594 mmThickness 60 mmTitaniaDimensions according to
RABT*
-
TitaniaWeight 8,3 kgSpecial key for openingSafety and
security*
-
TitaniaLED identification lights: There is 6 LEDs Osram Golden
Dragon Oval Plus inside of the housing Luminous intensity 75cd/m2
(RABT)
LED emergency fire lights: The internal lighting consists of 2
cool white6300K high performance LEDs. For additional security,
they are linked in such a way that should one LED everfail, the
others remain light.
Primary electrical circuit -14,5WSecondary electrical circuit
9WAll LEDs are protected behind safety glass*Total 23,5W
-
TitaniaSummary of technical dataEnergy consumption: 23,5W
(14,5W+9W)Degree of protection: IP 65Shock protection: IK09 (5
Joule)
Standards and certificatesVibration test EN 60068-2-64 Impact
resistance EN 60598-1 Change of temperature Class T2 (-25C / +55C)
IEC 60068-2-14 Damp heat Class T1/T2/T3 (+40C) EN 60068-2-30Water
ingress Class IP65 EN 60529Dust ingress Class IP65 EN 60529
Corrosion test (Salt spray test)*
***********
