COMBINATION DOORS by ELIXIR - Triad Mobile Home …triadmobilehomesupply.com/catalog/section_05.pdf · Flat Panel Combination COMBINATION DOORS by ELIXIR All combination doors have

Flat Panel Combination

COMBINATION DOORS by ELIXIR

All combination doors have 1-1/2" thick interior door hung in a pre-assembled solid wood frame withheavy hinges. The 1-1/8" thick stormdoor is made of heavy duty extrudedaluminum, and comes with clearsafety glass. The metal on these doorsis the same thickness as the metal on a6-panel steel door and has a whitevinyl cover electronically adhered tothe inside and outside metal whichdepicts rough sawn wood.

Note: Any door size not listed willbe a special order. Call us for details.

Part Number Size WINDOW TYPE STORMDOOR

Price

3-0003RH 32" x 72" 10" DIA. MILL FINISH $439.003-0004LH 32" x 72" 10" DIA. MILL FINISH $439.003-0015RH 32" x 76" 10" DIA. MILL FINISH $439.003-0016LH 32" x 76" 10" DIA. MILL FINISH $439.003-0045RH 34" x 76" 10" DIA. MILL FINISH $439.003-0046LH 34" x 76" 10" DIA. MILL FINISH $439.003-0051RH 34" x 78" 10" DIA. MILL FINISH $439.003-0052LH 34" x 78" 10" DIA. MILL FINISH $439.003-0057RH 34" x 80" 10" DIA. MILL FINISH $448.003-0058LH 34" x 80" 10" DIA. MILL FINISH $448.003-0070RH 38" x 76" 10" DIA. MILL FINISH $389.00

Stock doors have not been ordered with deadbolt locks, therefore, they have not been cut for the lock body, but, the hole has been cut for a 2-3/8" non-mortise drive-in deadbolt latch bolt.

How to measure for doors this page: Measure the width and length of the storm door only, add two inches to width of storm door and one inch to height which gives you the rough opening size. A storm door that is 32" wide by 75" tall would have a rough opening of 34" x 76". Also, you could remove the molding on the inside of the home and measure the rough opening. Give special attention to which side the hinges are on looking at the door from the outside of the house. Hinges on the left, it’s a left hand. Hinges on the right, it’s a right hand.

Under the window column you see 10" Dia. This means that all these doors have a 10" x 10" diamond window with clear glass.

Doors come with entry lock, storm door closure, safety chain, and storm door latch.

Stainless Steel Entry Lock 3-5101 Storm Door Hardware Package 3-5301Storm Door Safety Chain 3-5201

3-0071LH 38" x 76" 10" DIA. MILL FINISH $389.00

*Prices are Subject to Change without Notice.*

(336) 744-9071 Winston-Salem, NC Toll Free Phone (800) 836-3627Page 91

6-Panel W/Full View Storm

6-PANEL STEEL

ENTRY DOORS With

FULL VIEW STORM DOORS

by ELIXIR

This elegant 6-panel steeldoor is 1-3/4 inches thick,comes with wood-look white vinyl cover electronicallyadhered to the heavy (24-gauge) steel panels on bothsides of the door. Thethreshold is made of heavyextruded aluminum. A woodbrick molding may beinstalled over the mountingflange to give this door evenmore of a residential look.Both doors are pre-hung in a solid wood frame with heavyduty hinges. Storm doors aremade of heavy duty extrudedaluminum 1-1/8" thick and has clear safety glass. Note: Any door size notlisted will be a special order.Call us for details.

Part Number Description Price3-1077 34 x 76 LEFT HAND, WHITE 6-PANEL

DOOR, BROWN F/V STORM$492.00

3-1083 34 x 76 LEFT HAND, WHITE 6-PANELDOOR, WHITE F/V STORM

$492.00

3-1084 34 x 76 RIGHT HAND, WHITE 6-PANELDOOR, WHITE F/V STORM

$492.00


$509.00


$509.00


$497.00


$497.00

6-Panel W/Conventional Storm

6-PANEL STEEL ENTRY DOORS

With CONVENTIONAL

STYLE STORM DOORS

by ELIXIR

Note: Any door size not listed will be a special order. Call us for details.

Part Number Description Price3-1062 34 x 76 LEFT HAND, WHITE 6-PANEL

DOOR, WHITE CONV. STORM$497.00

3-1063 34 x 76 RIGHT HAND, WHITE 6-PANELDOOR, WHITE CONV. STORM

$497.00

3-1073 34 X 80 LEFT HAND, WHITE 6-PANELDOOR, WHITE CONV. STORM

$519.00

How to measure for doors on this page: Measure the width and length of the storm door only, add two inches to width and one inch to height of storm door for rough opening size. A storm door that is 32" wide by 75" tall would have a rough opening size of 34" x 76". Also, you could remove the moulding from around the door on the inside of the home and measure the rough opening. Give special attention to which side the hinges are on looking at the door from outside the home. Hinges on the left, it’s a left hand. Hinges on the right, it’s a right hand. Doors on this page come with and are pre-drilled for: Knocker viewer (preinstalled), entry lock, single cylinder deadlock, storm door safety chain, closure, and latch. Interior door hardware is stainless steel, storm door hardware is painted black. Doors come with entry lock, storm door closure, safety chain, and storm door latch. Stainless Steel Entry Lock 3-5101 Storm Door Hardware Package 3-5301

Storm Door Safety Chain 3-5201

3-1074 34 X 80 RIGHT HAND, WHITE 6-PANELDOOR, WHITE CONV. STORM

$519.00



6-Panel W/Fan-Lite Window

6-PANEL STEEL DOORS WITH

FAN-LITE WINDOWBY KINRO

This door has a 1-3/4” thick, 25-gauge 6-panel steelprimary door painted white.The polyurethane foam filleddoor core R-value is 5.5. The1-1/8” thick white all-glass full view storm door is madeof heavy duty extrudedpainted aluminum with clearsafety glass. Fan-lite windowhas 2-panes of thermallysealed safety glass ¾” thick.Both doors are mounted intopainted solid wood jamb withheavy duty replaceableresidential style Q-lon weatherstrip located on three sides for door to closeagainst and to keep air out.Four-leaf sill sweep onprimary door to keep outdrafts and insects. Stormdoor has built-in drip cap. Comes with all hardware. This door is available in thebelow size only and cannotbe ordered in any other sizewith all-glass storm door.

Part Number Description Price3-4040 34 X 76 LEFT HAND, WHITE 6-PANEL

DOOR WITH WHITE ALL-GLASS FULLVIEW ALUMINUM STORM DOOR,THERMAL FAN-LITE WINDOW

$539.00

How to measure for doors this page: Measure the width and length of the storm door only, add two inches to width of storm door and one inch to height which gives you the rough opening size. A storm door that is 32" wide by 75" tall would have a rough opening of 34" x 76". Also, you could remove the molding on the inside of the home and measure the rough opening. Give special attention to which side the hinges are on looking at the door from the outside of the house. Hinges on the left, it’s a left hand. Hinges on the right, it’s a right hand.

These doors come with stainless steel (tulip style knob) entry lock and stainless steel single cylinder (turn knob inside) deadlock (keyed alike), pneumatic storm door closure, safety chain and push-button storm door latch.

Stainless Steel Entry Lock and dead bolt combo 3-3055 Storm Door Hardware Package 3-5301 Storm Door Safety Chain 3-5201

3-4060 35 X 76 RIGHT HAND, WHITE 6-PANELDOOR WITH WHITE ALL-GLASS FULLVIEW ALUMINUM STORM DOOR,THERMAL FAN-LITE WINDOW

$539.00

9-Lite Window / Cottage Outswing

ENTRY DOOR (COTTAGE STYLE)

9-LITE WINDOW

This door has a 19" x 35" 9-lite single pane window with whitemolded plastic frame. The metalon this door is 24-gauge steel and has a white vinyl coverelectronically adhered to theoutside and inside metal. Thevinyl depicts rough sawn woodand will never need painting.Frame around door that attachesto the wall is unpaintedextruded aluminum. Door ispredrilled for 2-3/8" drive-in deadlock latch bolt. Door is white on exterior and interior.

Door is 1-1/2" thick Priced with hardware.

Listed below are the only sizeswe currently stock. All othersizes are special order. Callfor details.

Part Number Description Price3-4001 32" x 76" RIGHT HAND, WHITE $309.003-4002 32" x 76" LEFT HAND, WHITE $309.003-4003 34" x 76" RIGHT HAND, WHITE $319.00

How to measure for above doors: Measure the width and length of the door (part that opens) including the lip. This measurement will be the rough opening size. Also, you could remove the molding from around the door on the inside of the house and measure the rough opening. Give special attention to which side the hinges are on looking at the door from outside the home. Hinges on the right side, it’s a right hand door. Hinges on the left side, it’s a left hand door. Doors come with entry lock, storm door closure, safety chain, and storm door latch. Stainless Steel Entry Lock 3-5101 Storm Door Safety Chain 3-5201

Drip Cap Threshold 3-5701

3-4004 34" x 76" LEFT HAND, WHITE $319.00



15-Lite Window

ENTRY DOOR WITH

15-LITE WINDOW This steel entry door is 1-1/2" thick with a polyurethanefoam core. The metal on thisdoor is 24-gauge thicknessand has a white vinyl coverelectronically adhered to theoutside and inside steelpanels. The vinyl depictsrough sawn wood and willnever need painting. Theframe around the door thatattaches to the wall isunpainted extruded aluminum.The 15-lite, 23" x 65" windowhas clear thermal (insulated)glass. Door is predrilled for 2-3/8" drive-in deadlock latchbolt. Door is white on interiorand exterior.

Priced with Hardware.

Listed are the only size wecurrently stock. Other sizesare available by specialorder. Call us for details.

Part Number Description Price3-4013 34" x 76" RIGHT HAND, WHITE $379.00

How to measure for above doors: Measure the width and length of the door (part that opens) including the lip. This measurement will be the rough opening size. Also, you could remove the molding from around the door on the inside of the house and measure the rough opening. Give special attention to which side the hinges are on looking at the door from outside the home. Hinges on the right side, it’s a right hand door. Hinges on the left side, it’s a left hand door. Doors come with entry lock, storm door closure, safety chain, and storm door latch. Stainless Steel Entry Lock 3-5101 Storm Door Safety Chain 3-5201 Drip Cap Threshold 3-5701

3-4014 34" x 76" LEFT HAND, WHITE $379.00

6 Panel / Outswing

ENTRY DOOR 6-PANEL

(OUTSWING DOOR) The metal on this door is 24-gauge steel and has a whitevinyl cover electronicallyadhered to the outside andinside metal. The vinyldepicts rough sawn wood andwill never need painting.Frame around door thatattaches to the wall is unpainted extruded aluminum. Has a chrome plated knocker-viewer factory installed. Dooris predrilled for 2-3/8" drive-in deadlock latch bolt. Door is white on interior andexterior.

Door is 1-1/2" thick.

Priced with Hardware.

Listed below are the only sizes we currently stock. Allother sizes are special order.Call for details.

Part Number Description Price3-4021 32" x 76" RIGHT HAND, WHITE $260.003-4022 32" x 76" LEFT HAND, WHITE $260.003-4023 34" x 76" RIGHT HAND, WHITE $291.00

How to measure for above doors: Measure the width and length of the door (part that opens) including the lip. This measurement will be the rough opening size. Also, you could remove the molding from around the door on the inside of the house and measure the rough opening. Give special attention to which side the hinges are on looking at the door from outside the home. Hinges on the right side, it’s a right hand door. Hinges on the left side, it’s a left hand door. Doors come with entry lock, storm door closure, safety chain, and storm door latch. Stainless Steel Entry Lock 3-5101 Storm Door Safety Chain 3-5201

Drip Cap Threshold 3-5701

3-4024 34" x 76" LEFT HAND, WHITE $291.00



No Window / Blank Outswing

ENTRY DOOR NO WINDOW

(OUTSWING DOOR) The window has been left out of thisdoor for security reasons. Entry lockmounts in the center edge of thedoor, therefore, it can be used as aleft hand or a right hand door. Themetal on this door is 24-gauge steeland has a white vinyl coverelectronically adhered to the outsideand inside metal. The vinyl depictsrough sawn wood and will neverneed painting. Frame around doorthat attaches to the wall is unpaintedextruded aluminum. Door is whiteinside and outside.

Door is 1-1/2" thick Priced with hardware.

Listed are the only sizes we stock,all other sizes are special order.Please call us for detail.

Part Number Description Price3-2002 30" x 72", NO WINDOW (BLANK) $239.003-2009 32" x 72", NO WINDOW (BLANK) $239.003-2016 32" x 74", NO WINDOW (BLANK) $239.003-2023 32" x 76", NO WINDOW (BLANK) $239.003-2058 34" x 76", NO WINDOW (BLANK) $245.00

How to measure for doors on this page: Measure the width and length of the door (part that opens) including the lip. This measurement will be the rough opening size. Also, you could remove the molding from around the door on the inside of the home and measure the rough opening. Give special attention to which side the hinges are on looking at the door from outside the home. Hinges on the right side, it’s a right hand door. Hinges on the left, it’s a left hand door. Doors on this page come with Stainless Steel Entry Lock, Threshold, Drip Cap and Safety Chain.

3-2073 36" x 80", NO WINDOW (BLANK) $253.00

Diamond Outswing

ENTRY DOOR DIAMOND WINDOW (OUTSWING DOOR)

This door comes with a 10" x 10"diamond window with clear singleglass. The metal on this door is 24-gauge steel and has a white vinylcover electronically adhered to theoutside and inside metal. The vinyldepicts rough sawn wood and willnever need painting. Frame arounddoor that attaches to the wall isunpainted extruded aluminum. Door is white inside and outside.

Door is 1-1/2" thick. Priced with hardware.

Listed are the only sizes we stock,all other sizes are special order.Please call us for detail.

Part Number Description Price3-2010RH 32" x 72", RIGHT HAND, DIAMOND

WINDOW$249.00

3-2011LH 32" x 72", LEFT HAND, DIAMONDWINDOW

$249.00

3-2024RH 32" x 76", RIGHT HAND, DIAMONDWINDOW

$249.00


$249.00


$255.00


$255.00


$212.00


$212.00


$220.00

REASONS WHY YOU SHOULD BUY THESE DOORS OVER CHEAPER MADE DOORS ON THE MARKET

24 gauge steel with a 10 mil vinyl covering electronically adhered to the steel that will never need painting.

1-1/2” thick door with solid wood styles inside the entire perimeter of the door for added strength.

The door core is filled with molded polyurethane foam for added strength and greater insulating value, R3.106.

Heavy duty extruded aluminum frame that attaches to building.

Replaceable hinge system.

All hardware is included in price except deadbolt lock.

Entry lock is made of stainless steel and is rekeyable.

Door is predrilled and plugged for deadbolt latch bolt should you decide to install a deadbolt lock.


$220.00



Vertical Slide Outswing

ENTRY DOOR with

VERTICAL SLIDE WINDOW

(OUTSWING DOOR) This 1-1/2" thick door comeswith an 18"x20" single glassvertical slide window andscreen. The metal on this dooris 24-gauge steel and has avinyl cover electronicallyadhered to the metal. Thevinyl depicts rough sawnwood and will never needpainting. Frame around doorthat attaches to the wall isunpainted extruded aluminum.Doors are white inside andoutside.

Priced with hardware.

Listed are the only sizes westock, all other sizes arespecial order. Please call usfor detail.

Part Number Size HANDED WINDOWTYPE

Price

3-2005RH 30" x 72" RIGHTHAND

VERTICALSLIDE

$249.00

3-2006LH 30" x 72" LEFT HAND VERTICALSLIDE

$249.00


VERTICALSLIDE

$249.00


$249.00


VERTICALSLIDE

$249.00


$249.00


VERTICALSLIDE

$249.00

See previous page on how to measure for correct size. Doors on this page come with Stainless Steel Entry Lock, Safety Chain, Drip Cap and Threshold.


$249.00



REPLACEMENT WINDOW (DIAMOND)

This 10" x 10" diamond style replacementdoor window is made of molded plastic.Comes with a clear tempered glass and allscrews to install. Fits rough opening 10-3/4" x 10-3/4". Fits 1-1/4" to 1-1/2” thick doors.

Part Number Description Price3-3000 WHITE $11.983-3001 REPLACEMENT GLASS, CLEAR,

TEMPERED, 9-7/8" x 9-7/8" x 1/8"$4.98

REPLACEMENT WINDOW 4" WIDE x 24" LONG

This 4" x 24" replacement door window is made ofmolded plastic. Comes with an obscure acrylic paneand all screws to install. Fits rough opening 4-3/4" x 24-3/4". Fits 1-1/4" to 1-1/2” thick doors.

Part Number Description Price3-3005 WHITE $17.953-3007 REPLACEMENT GLASS, ACRYLIC,

OBSCURE, 3-7/8" x 23-7/8" x 1/8"$5.49

REPLACEMENT WINDOW (VERTICAL SLIDE)

Vertical slide aluminum replacement doorwindow is 18" x 20" with clear top glass andobscure movable bottom panel. Comes withfixed nylon screen. Fits 1-1/4" to 1-1/2” thick doors.

Part Number Description Price3-3013 18" x 20" $42.95

Cottage, Outswing Doors

REPLACEMENT WINDOW (COTTAGE STYLE)

Out-Swing Doors

The frame of these 9-lite door windowsare made of white molded plastic with UV protection. Comes with clear single pane tempered glass and screws toinstall. Rough opening is 20-5/8" wide x 36-5/8" high on windows for outswingdoors 1-1/4" to 1-1/2" thick. Frame or glass is not sold separately.

Part Number Description Price3-3010 OUTSWING DOORS $69.00

Cottage, Combo Doors

REPLACEMENT WINDOW (COTTAGE STYLE)

Combination Doors

The frame of these 9-lite door windows are made of white molded plastic with UV protection. Comes with clear double pane (thermal) tempered glass and screws to install. Rough opening is 23" wide x 37" high on windows for combination doors (doors with storm doors) 1-1/4" to 1-1/2" thick. Frame or glass is not sold separately.

Part Number Description Price3-3012 COMBO DOORS $89.00

REPLACEMENT WINDOW Fan-Lite

This clear tempered insulatedglass window is 23-3/4” wide at widest point and 12” high athighest point. Rough openingis 22” wide x 10” high. Fitsdoors 1-1/4” through 1-1/2” thick. Frame and grids aremade of UV protectedextruded plastics. Has grids on both inside & outside.Comes with screws andscrew hole covers.

Part Number Price3-3014 $49.95



Self-Storing, Mill Finish

SELF-STORING STORM DOORS

(Mill finish) These doors feature heavyduty extruded aluminum, with heavy corner gussets, has four extruded aluminum hinges,tempered safety glass, nylonscreening, and more. Forventilation purposes, thebottom glass panel raises up and stores behind the top glasspanel.



Part Number Description Price3-1010 32" x 76" MILL, RIGHT HAND $164.003-1030 34"x 76" MILL, RIGHT HAND $189.003-1031 34"x 76" MILL, LEFT HAND $189.003-1034 34"x 78" MILL, RIGHT HAND $189.003-1035 34"x 78" MILL, LEFT HAND $189.003-1038 34"x 80" MILL, RIGHT HAND $189.003-1039 34"x 80" MILL, LEFT HAND $189.00

SELF-STORING STORM DOORS

(White and Brown) These doors feature heavyduty pre-painted extruded aluminum frames with heavy corner gussets. Has four extruded aluminum hinges.Clear tempered safety glass.For ventilation purposes thebottom glass panel raises up and stores behind the top glasspanel.



Part Number Description Price3-2213 34"x 76" WHITE, RIGHT HAND $198.003-2215 34"x 76" WHITE, LEFT HAND $198.003-2217 34"x 78" WHITE, RIGHT HAND $198.003-2219 34"x 78" WHITE, LEFT HAND $198.003-2221 34"x 80" WHITE, RIGHT HAND $198.003-2223 34"x 80" WHITE, LEFT HAND $198.003-2227 36"x 80" WHITE, RIGHT HAND $198.00

How to measure for doors this page. Measure the width and length of the door (part that opens) only. Add two inches to width and one inch to height of storm door for the rough opening size. A storm door that is 32" wide by 75" tall has a rough opening of 34" x 76". Give special attention to which side the hinges are on looking at the door from outside the home. Hinges on the right side, it’s a right hand door. Hinges on the left side, it’s a left hand door. Hardware includes: Safety Chain 3-5201 Storm Door Hardware Package 3-5301

(Consists of one Closer & Door Latch)

3-2228 36"x 80" BROWN, RIGHT HAND $178.00



Full View, White & Brown

FULL VIEW STORM DOORS

(White and Brown) These doors feature heavyduty pre-painted extrudedaluminum frame with heavycorner gussets, has fourreplaceable extrudedaluminum hinges, temperedsafety glass, nylon screening,and more. For ventilationpurposes remove the glasspanel.



Part Number Description Price3-2165 34"x 76" WHITE LEFT HAND $198.003-2170 34"x 76" WHITE RIGHT HAND $198.003-2166 34"x 78" WHITE LEFT HAND $198.003-2171 34"x 78" WHITE RIGHT HAND $198.003-2167 34"x 80" WHITE LEFT HAND $198.003-2172 34"x 80" WHITE RIGHT HAND $198.003-2180 38"x 76" WHITE LEFT HAND $198.003-2181 38"x 76" WHITE RIGHT HAND $198.003-2156 34"x 76" BROWN LEFT HAND $198.003-2160 34"x 76" BROWN RIGHT HAND $189.003-2157 34"x 78" BROWN LEFT HAND $189.003-2161 34"x 78" BROWN RIGHT HAND $189.003-2158 34"x 80" BROWN LEFT HAND $189.003-2162 34"x 80" BROWN RIGHT HAND $189.00

ALL-GLASS FULL VIEW

STORM DOORS (White)

These doors feature heavyduty extruded pre-painted aluminum frames with heavyduty corner gussets. Has fourreplaceable extrudedaluminum hinges, non-removable clear tempered safety glass. Does not haveany type of screen, therefore, glass is not removable for ventilation purposes.



Part Number Description Price3-2184 34"x 76" WHITE, LEFT HAND $198.003-2185 34"x 76" WHITE, RIGHT HAND $198.003-2190 36"x 80" WHITE, LEFT HAND $198.00

How to measure for doors this page: Measure the width and length of the door (part that opens) only. Add two inches to width and one inch to height of storm door for rough opening size. A storm door that is 32" wide by 75" tall has a rough opening of 34" x 76". Give special attention to which side the hinges are on looking at the door from outside the home. Hinges on the right side, it’s a right hand door. Hinges on the left side, it’s a left hand door. Hardware includes: Safety Chain 3-5201 Storm Door Hardware Package 3-5301

(Consists of one Closer & Door Latch)

3-2191 36"x 80" WHITE, RIGHT HAND $198.00



Flat Panel With Decorative Oval Windows

FLAT PANEL STEEL ENTRY DOOR WITH DECORATIVE OVAL WINDOW

(8000 Series with SI 919 Oval Glass)

1-1/2" THICK POLYURTHANE FILLED STEEL DOOR

RESIDENTIAL ONE-PIECE FINGER JOINT PINE JAMBS

YOUR CHOICE OF THREE STYLES OF STORM DOORS:ALL GLASS FULL VIEW, FULLVIEW & SELF-STORING

AVAILABLE IN THREE SIZES: 34"x76", 34"x78" & 34"x80" ( This is rough opening size)

HAS MANUFACTURED HOME STYLE MOUNTING FLANGE (NO BRICKMOLD)

COMES WITH KEYED ALIKE BRASS ENTRY LOCK & DEADLOCK ALONG WITH ALL STORM DOOR HARDWARE

COMES WITH BRASS KICK PLATE

We only stock the size listed, other available sizes may be special ordered.

DescriptionCALL FOR PRICING

The above doors come with all-glass full view storm doors painted white.

CALL FOR PRICING

FLAT PANEL STEEL ENTRY DOOR WITH DECORATIVE OVAL WINDOW

(7100 Series 919 ME Oval Glass)

1-3/4" THICK POLYURATHANE FILLED STEEL DOOR

RESIDENTIAL ONE-PIECE FINGER JOINT PINE JAMBS

LIFETIME WARRANTY WEATHERSTRIPPING

WINDOWS COME IN TWO DIFFERENT TYPES: BRASS CAMING & ZINC CAMING

YOUR CHOICE OF THREE STYLES OF STORM DOORS:ALL GLASS FULL VIEW, FULL VIEW & SELF-STORING

AVAILABLE IN THESE SIZES: CALL SIZE 32"x74" (ROUGH OPENING SIZE 34"x76-1/2"), CALL SIZE 32"x80" (ROUGH OPENING SIZE 34"x82-3/8"), CALL SIZE 36"x80"(ROUGH OPENING SIZE 38"x82-3/8")

HAS BRICKMOLD AROUND OUTER PERIMETER OF STORM DOOR

COMES WITH KEYED ALIKE ENTRY LOCK & DEADLOCK ALONG WITH ALL STORM DOOR HARDWARE

The 7100 series door is available by special order, please call for pricing. NOTE: DECORATIVE WINDOW DOOR WITH BRASS CAMING COMES WITH BRASS DOOR HARDWARE DECORATIVE WINDOW DOOR WITH ZINC CAMING COMES WITH STAINLESS STEEL DOOR HARDWARE

DescriptionCALL FOR PRICING



FRENCH DOORS (Both Doors Swing To Inside)

DOORS ARE MADE OF 24-GAUGE STEEL WITH 1-3/4” THICK POLYURETHANE FOAM BETWEEN THE TWO STEEL PANELS. DOORS ARE PRIMED, READY TO PAINT. EACH DOOR IS 34” WIDE OVERALL.

HAS 4-5/8” WIDE (PRIMED WHITE) WOOD JAMBS.

15-LITE CLEAR THERMAL TEMPERED GLASS WINDOWS ARE 22” WIDE & 64” HIGH. GRIDS ARE BETWEEN THE GLASS.

BOTH DOORS ARE IN-SWING, HOWEVER, MUST SPECIFY PRIMARY-OPENING DOOR TO BE ON THE LEFT (XO) OR RIGHT (OX) SIDE LOOKING FROM OUTSIDE OF HOME.

ROUGH OPENING SIZE IS 71-1/4” WIDE X 76” HIGH.

THIS UNIT IS IDEAL FOR REPLACING SLIDING PATIO DOORS IN MOBILE HOMES.

HAS FLUSH (PRIMED WHITE) WOOD BRICKMOLD.

EACH DOOR HAS THREE HEAVY DUTY HINGES, WHICH MAY BE ORDERED IN POLISHED BRASS OR SATIN NICKEL.

THRESHOLD IS MADE OF ALUMINUM AND HAS BUILT-IN HEIGHT ADJUSTMENT.

THESE DOORS MAY BE ORDERED WITH WHITE 5/8” WIDE ALUMINUM MINI-BLINDS INSTALLED BETWEEN THE WINDOW GLASS INSTEAD OF THE GRIDS. THE BLINDS RAISE & TILT USING EXTERNAL CONTROLS.

LATCHING/LOCKING MECHANISMS ARE LOCATED IN THE CENTER WHERE THE TWO DOORS MEET. THE SECONDARY-OPENING DOOR LATCHING SYSTEM IS MORTISED INTO THE EDGE OF THE DOOR AND CONSISTS OF SLIDE BOLTS THAT WHEN DEPLOYED FITS INTO OPENING IN THE THRESHOLD AND HEADER.

THE PRIMARY-OPENING DOOR IS DRILLED FOR KNOB TO KNOB ENTRANCE LOCK AND DEADLOCK. HOLES ARE DRILLED FOR 1” DIAMETER X 2-3/8” BACKSET DRIVE-IN LATCHBOLTS. ALL STRIKE PLATES ARE PRE-INSTALLED.

UNIT IS PRICED LESS HARDWARE, HOWEVER, WE CAN SUPPLY KEYED-ALIKE HARDWARE (ENTRANCE LOCK, SINGLE CYLINDER DEADLOCK) IN POLISHED BRASS (TITANIUM PVD) FINISH (LIFETIME FINISH WARRANTY) OR STAIN RESISTANT STAINLESS STEEL AT AN EXCELLENT PRICE. LOCKSETS COME WITH 1” DIAMETER ADJUSTABLE (2-3/8” OR 2-3/4”) DRIVE-IN LATCHBOLTS. COMBINATION KEYED-ALIKE LOCKSETS COME WITH 4 KEYS. SEE LOCKSETS THIS PAGE.

Shown is a right hand access door unit

Part Number Description Price3-8020 72" x 76", (GRIDS BETWEEN THE GLASS) LEFT HAND (XO) PRIMARY DOOR $798.003-8024 72" x 76", (GRIDS BETWEEN THE GLASS) RIGHT HAND (OX) PRIMARY DOOR $798.003-8026 72" x 76", (BLINDS BETWEEN THE GLASS) LEFT HAND (XO) PRIMARY DOOR $977.003-8028 72" x 76", (BLINDS BETWEEN THE GLASS) RIGHT HAND (OX) PRIMARY DOOR $977.00

MATCHING 2-PIECE KEYED-ALIKE LOCKSET

BY EZSET

BALL KNOB DESIGN

Part Number Description Price3-5510 BRIGHT GOLD (POLISHED BRASS) $42.003-5511 STAINLESS STEEL $29.98



6-Panel Steel Entry Doors by Kinro

6-PANEL STEEL ENTRY DOORS

By KINRO

This 25-gauge 6-panel whitesteel door is 1-3/4” thick,comes with keyed alikestainless steel entry lock, deadbolt lock andknocker/viewer. Door is mounted in a pre-painted ¾” thick wood frame suitable forup to 4 inch wall thickness.Aluminum threshold has athermal break to prevent heattransfer. The four-leaf sill sweep prevents air & insectsfrom entering under the door.The 6-panel door closesagainst a metal blind stop withresidential style Q-Ion weather strip. The white full-view storm door hinge systemhas a full length galvanizedhinge pin with stainless steelbushings. The tempered safetyglass in a full-view storm isnot designed to be removedfor ventilation purposes.Comes with storm doorhardware with includes push-button latch, safety chain andpneumatic closer. Stocked in white only.

Part Number Description Price3-4070 34X76 LEFT HAND WHITE 6-PANEL

DOOR, FULL-VIEW STORM$479.00

3-4072 34X76 RIGHT HAND WHITE 6-PANELDOOR, FULL-VIEW STORM

$479.00

3-4074 34X78 LEFT HAND WHITE 6-PANELDOOR, FULL-VIEW STORM

$495.00


$495.00


$489.00


$489.00


$495.00


$495.00

3-4098 38X80 LEFT HAND WHITE 6-PANELDOOR, ALL GLASS FV STORM

$499.00

Doors on this page come with and are predrilled for: Knocker viewer (preinstalled), entry lock, single cylinder deadlockstorm door safety chain, closure and latch. Interior door hardware stainless steel, storm door hardware is painted black.

3-4099 38X80 RIGHT HAND WHITE 6-PANELDOOR, ALL GLASS FV STORM

$499.00

Kick Plate

Part Number Description Price3-4065 KICKPLATE, POLISHED BRASS

COLOR ON ANODIZED ALUMINUM, 5"H X 30" W FITS DOORS 32" (ACTUALWIDTH) WIDE.

$37.00



For Elixir Doors

DOOR HINGE This exterior door hinge fits ElixirDoors. Brass plated steel. Non-mortise.

Part Number Description Price3-3023 BRASS $3.49

For Storm Door

STORM DOOR HINGES

EXTRUDED ALUMINUM

Fits Elixir Doors. 2-7/8" long. Has

nylon bushings. Part Number Description Price3-3025 MILL $1.893-3025B BROWN $1.893-3025W WHITE $1.893-3024 BUSHING, 2/PKG $0.59

For Outswing Exterior Doors

DOOR HINGE

ALUMINUM

Fits Elixir Out Swing Mobile Home Doors.

Has nylon sleeve in each end. 2-7/8" long, approx 1-1/16" from center ofhole in nylon sleeve to back side ofmounting flange.

Part Number Description Price3-3026 ALUMINUM $1.193-3026W WHITE $1.193-3024 BUSHING, 2/PKG $0.59

DOOR HINGE PIN Elixir Brand

Outswing Entry Doors Storm Doors

Hinge pin is 1/8” diameter x 80” long, ismade of stainless steel for long life. May becut to desired length.


REPLACEMENT CYLINDERS

for WEISER LOCKS

These replacement cylinders comewith two keys.

Part Number Description Price3-3053 ONE CYLINDER $4.983-3054 TWO CYLINDERS, KEYED ALIKE $8.98

DECORATIVE HANDLE

for ENTRANCE DOORS

Escutcheon (round) part of handle fits between door and door lock. A decorative fastener secures bottom of handle to door. Handle is 12-3/4" in overall length. The satin nickel handle color-matches well with stainless steel entry locks.

Part Number Description Price3-3062 BRIGHT GOLD $8.993-3063 SATIN NICKEL $8.99

ENTRY LOCK Replacement for

KWIKSET

Heavy duty entrance lock with re-keyable brass cylinder. Comeswith a 2-3/8" drive-in latch bolt. For doors 1" to 1-3/4" thick. Comes with two keys. Want a key lock for your bedroom or closet doors? This is the lock to do the job. May need to change-out the drive-in latch bolt that comes with the lock for one that has a smaller diameter like part # 2-2120.

Part Number Description Price3-3027 POLISHED BRASS $11.983-3027BC BRUSHED CHROME $18.953-3027SS STAINLESS STEEL $9.98

LATCHBOLT KWIKSET

Mortise type

For keyed entry locks and bedroom locks that use this type latch bolt. Adjustable from 2-3/8" to 2-3/4". Polished brass.




Tulip Knob

TULIP KNOB ENTRY LOCKS

by EZSET

Heavy duty lock with re-keyable brass cylinder.Comes with an adjustable 2-3/8" to 2-3/4" drive-in latchbolt. Mortise typelatchbolts may be substitutedfor drive-in latchbolts at no-charge. Comes with 2 keys.For doors 1-3/8" to 1-3/4" thick. Has anti-lock-out feature.

Part Number Description Price3-BP100 STAINLESS STEEL $14.493-BP200 POLISHED BRASS $14.983-BP300 ANTIQUE BRASS $15.98

Combination Locksets

COMBINATION ENTRY

LOCKSETS by

EZSET

This lockset consists of a tulipknob entry lock and a singlecylinder deadlock. Both lockshave adjustable 2-3/8" to 2-3/4" drive-in latch bolts. Mortise type latchbolts may besubstituted at no charge. For doors 1-3/8" to 1-3/4" thick. Both are keyed alike and has 4 keys. Has solid brass re-keyable cylinders. Entry lock has anti-lock-out feature.

Part Number Description Price3-3055 STAINLESS STEEL SET $29.983-3056 POLISHED BRASS SET $31.98

Dead Bolts, Single Cylinder

SINGLE CYLINDER

DEADLOCKS by

EZSET

This single cylinder heavy dutylock comes with an adjustable 2-3/8" to 2-3/4" drive-in latch bolt. Has a solid brass re-keyable cylinder. Comes with 2 keys. Fordoors 1-3/8" to 1-3/4" thick.

Part Number Description Price3-3057 STAINLESS STEEL $16.793-3058 POLISHED BRASS $17.893-3059 ANTIQUE BRASS $18.98

DOUBLE CYLINDER

DEADLOCKS by

EZSET This double cylinder heavy dutylock comes with a 2-3/8" to 2-3/4"drive-in latch bolt. Has a solidbrass re-keyable cylinder. Comeswith 2 keys. For doors 1-3/8" to 1-3/4" thick.

Part Number Description Price3-3168 STAINLESS STEEL $20.983-3169 POLISHED BRASS $21.98

L-Handle Entry

L-HANDLE ENTRY LOCKS

This L-handle entry lock meets ADA requirements. Conformswith ANSI A156.2. Has concealed mounting screws. Reversible for right/left hand applications. Fordoors 1-3/8" to 1-3/4" thick. Comes with 2-3/8" drive-in latchbolt. Has two keys.

Part Number Description Price3-3170 BRUSHED NICKEL $26.693-3171 POLISHED BRASS $25.00



Drive-In

Entry Locks

DRIVE-IN LATCHBOLTS

for EZSET LOCKS

Part Number Description Price3-3096 2-3/8" & 2-3/4", ADJUSTABLE $4.983-3097 2-3/8" & 2-3/4" ADJUSTABLE (Philips &

Kinro Brand Doors)$4.98

Dead Locks

Part Number Description Price3-3172 2-3/8" & 2-3/4", ADJUSTABLE $6.953-3173 2-3/8" & 2-3/4" ADJUSTABLE (Philips &

Kinro Brand Doors)$5.98

Screw-In

Entry Locks

MORTISE (SCREW-IN)

LATCHBOLTS for

EZSET LOCKSPart Number Description Price3-3098 2-3/8"& 2-3/4", STAINLESS STEEL $4.983-3177 2-3/8"& 2-3/4", POLISHED BRASS $6.95

Dead Locks

Part Number Description Price3-3179 2-3/8" & 2-3/4", STAINLESS STEEL $6.953-3180 2-3/8" & 2-3/4", POLISHED BRASS $6.95

Life Time Finish Warranty By EZSet

ENTRY LOCK by EZSET

This sturdy built lock has a lifetime finish warranty against tarnishing or discoloring. Fits 1-3/8" to 1-3/4" thick doors. Comeswith an adjustable, 2-3/8" to 2-3/4", drive-in latch bolt. However,latch bolt can be switched to a mortise type. Heavy brass tumblermay be re-keyed. Has ball style (round) knob.

Part Number Description Price3-5501 BRIGHT GOLD $19.98

Dead Bolts, Single Cylinder, Gold

SINGLE CYLINDER DEADLOCK

by EZSET

This heavy duty lock has alifetime finish warrantyagainst tarnishing ordiscoloring. Fits 1-3/8" thru 1-3/4" thick doors. Comes with anadjustable, 2-3/8" to 2-3/4", drive-in latch bolt. However, latch bolt can be switched to a mortise type. Latch bolt has a full 1" throw and has a free-floating hardened steel rodinsert that prevents sawing.Heavy duty solid brass tumblermay be removed for re-keying. Reversible for RH/LH doors.


DOUBLE CYLINDER DEADLOCK

by EZSET

This heavy duty lock has alifetime finish warrantyagainst tarnishing ordiscoloring. Fits 1-3/8" thru 1-3/4" thick doors. Comes withan adjustable, 2-3/8" to 2-3/4", drive-in latch bolt. However, latch bolt can be switched to a mortise type. Latch bolt has a full 1" throw with a floatinghardened steel rod insert thatprevents sawing. Heavy brasstumbler may be re-keyed. Reversible for RH/LH doors.




Combination Locksets

COMBINATION LOCKSET

by EZSET

These combination locksets havean entry lock and a singlecylinder deadlock that has alifetime finish warranty. Both fit doors from 1-3/8" to 1-3/4" thick. Both come with adjustable, 2-3/8" to 2-3/4", drive-in latchbolts. Latch bolts may beswitched to mortise type latchbolts. Both locks are keyed alike.

Part Number Description Price3-5510 BRIGHT GOLD $42.003-5511 STAINLESS STEEL $29.98

ENTRANCE HANDLESET

by EZSET

The gold handle set has a lifetime finish warranty, the brushed nickel has a 5-year finish warranty andthe stainless steel has a 25 year product warranty.The interior knob is of the ball (round) design. Has asingle cylinder deadlock with a 1" throw latch bolt. Reversible for right hand or left hand doors. Hasadjustable 2-3/8" - 2-3/4" *drive-in latch bolts. May substitute mortise type latch bolts or vice-versa at no cost.

Part Number Description Price3-5515 BRIGHT GOLD, (Made of forged solid

brass), (Lifetime finish warranty)$99.00

3-5517 SATIN NICKEL, (1-year productwarranty)

$79.00

NOTE: Lifetime finish and 5-year mechanical warranty. This warranty covers goods listed as lifetime finish against defects in material and workmanship for a lifetime for the finish and five-years for mechanical to the original user in the original installation. This warranty does not cover scratches or abrasions; abuse or misuse; deterioration due to paint, solvents, or any other chemicals; or residential products used in commercial applications. The manufacturer may repair or replace the product or refund the purchase price upon return of the defective product. In no event shall the manufacturer be liable for any incidental or consequential damages arising from the sale or use of the product.

3-5519 STAINLESS STEEL, by Guard Securties*Mortise Latchbolts (25-year warranty)

$55.00

Screw Pack For Entry Door Locks

SCREW PACK FOR INSTALLING

ENTRY DOOR LOCKS Two 1-3/8"long round Phillips head screws for installing lock. Four 3/4" long flat countersunk Phillips head screws for strike plate and mortise type latch bolt.


Tulip Knob

TULIP KNOB LATCH

for STORM & SCREEN

DOORS Fits all wood and metal out swingdoors 5/8" to 1-1/4" thick. Mounting hole spacing is 1-3/4" and installs in three 1/4" diameterholes. Has “L” shaped handle oninside.

Part Number Description Price3-3184 ALUMINUM $8.79

Lever Handle LockSet

LEVER HANDLE LOCKSET

for STORM & SCREEN

DOORS Surface mount for metal storm doorsor wood & vinyl screen doors from3/4" to 1-3/8" thick. The outsidehandle and escutcheon plate ispolished brass. The insidemechanisms are white baked-onenamel. Fits 1-3/4" mounting holespacing. Comes with two keys.




Latch With Locking Key Plug

STORM DOOR LATCH WITH

LOCKING KEY PLUG This heavy duty latch is built to takerough handling. Bottom part of pullhandle attaches to storm door toprevent breaking during roughhandling. Fits all storm doors 7/8" to 1-1/4" thick with 1-3/4" mounting hole spacing. Has key lock plug with 2keys.

Part Number Description Price3-3094 BLACK $13.98

Latch

STORM DOOR LATCH This heavy duty latch is built to takerough handling. Bottom part of pullhandle attaches to storm doorpreventing handle from breakingduring rough handling. Fits all outswing doors 7/8" to 1-1/4" thick, andwith 1-3/4" mounting hole spacing. Has anti-lockout feature. Comes withall mounting hardware.

Part Number Description Price3-3091 ALUMINUM $8.983-3092 BLACK $8.983-3093 WHITE $8.98

STORM DOOR CLOSURE

This heavy duty pneumaticclosure fits all storm and screendoors. Permanently sealedtube with internal shockabsorber spring, has adjustingscrew.

Part Number Description Price3-3081 ALUMINUM $9.983-3082 BLACK $9.983-3083 WHITE $9.98

STORM DOOR HARDWARE PACKAGE

Consists of storm door latch andpneumatic closure. We stock inblack only.


SAFETY CHAIN For all storm and screen doors.Hold-up spring keeps chain out of and away from glass and screenarea.


Key Lock Plug

KEY LOCK PLUG Storm Door Latch

Replace the standard push button with this keyed push button to add extra security to your home. Has 2 keys.

Part Number Description Price3-3093A ALUMINUM $4.983-3093B BLACK $4.98

STRIKE for

STORM DOORS Standard Height

Part Number Description Price3-1986 BLACK $1.293-1987 WHITE $1.69

STRIKE PLATE for

STORM DOORS

2-1/4" LONG




STRIKE PLATE Brass Plated Steel

This 6" long x 1" wide strike plate isdesigned for use with deadlocks. Comeswith screws.


SHIM for

STRIKES Designed to be used withstorm door strikes. Made ofsoft plastic.


STRIKE PLATE Zinc Die Cast

2-1/2" long x 1" wide. Mounting holes are 2" centerto center.


STRIKE PLATE Used on Elixir Industries 6-panel steel doors.3" long x 2-1/4" wide.

Part Number Description Price3-3073 CHROME PLATED $1.98

STRIKE PLATE Used on Elixir Industries out swing M/H doors. Mounting holes are 2-13/16" center to center.

Part Number Description Price3-3074 CHROME PLATED $1.39

STRIKE PLATE This steel strike plate is 3" long x 1-3/4" wide overall. Countersunk screw hole pattern is 2-5/16" center to center. Brass plated.

Part Number Description Price3-3075 BRASS PLATED $0.89

STRIKE PLATES 2-1/4" long x 1-3/4" wide with countersunk mounting screw holes 1-5/8" center to center. Plated steel orstainless steel where indicated.

Part Number Description Price3-3049 SATIN NICKEL $0.983-3050 POLISHED BRASS $0.983-3051 STAINLESS STEEL $1.19



STRIKE PLATE Brass Plated Steel

2-1/4" long x 1" wide. Mounting holes are 1-5/8" center to center.

Part Number Description Price3-3052 BRASS PLATED $0.98

DOOR VIEWERS 180 degree coverage glass lens.One way viewing only. 9/16"diameter installation hole. Fordoors 1-3/8" to 2" thick.

Part Number Description Price3-3039 CHROME FINISH $2.983-3040 POLISHED BRASS $4.49

KNOCKER/VIEWERS For 1-1/4” to 1-3/4” thick doors.Requires 9/16” diameter installationhole. 160 degrees one-way viewing.Made of zinc metal. 4” overall height.

Part Number Description Price3-3041 ANTIQUE BRASS $8.793-3042 POLISHED BRASS $8.793-3043 BRUSHED NICKEL $4.983-3044 CHROME $4.98

SLIDE BOLT KIT

(Storm Door)

For Elixir storm doors with sliding bottom glass panel. Used onmill finish, white and brown painted doors. Kit consists of: 1-RH slide bolt, 1-LH slide bolt, 2 springs, 2 pivot keys and 2 corner keys. Made of die cast zinc.




SCREW PACK FOR INSTALLING

ENTRY DOOR LOCKS Two 1-3/8"long round Phillips head screws forinstalling lock. Four 3/4" long flat countersunkPhillips head screws for strike plate and mortise type latch bolt.


SCREW PACK REPLACEMENT

DEADLOCKS by

EZ-SET These screw packs come with two longscrews for securing deadlocks and four3/4” long flat countersunk Philips headscrews for strike plate and mortise typelatch bolt. SINGLE CYLINDER


DOUBLE CYLINDER


LATCH SAV’R Helps prevent damage to most outswing doors by limiting would-b intruders access to door edge and to lock latchbolt plunger. Entrylock fits through opening in Latch Sav’r and Latch Sav’r issandwiched between entry lock flange and door. Made of heavy painted metal. Unit is 6” long x 5-3/8” wide at the widest point.Comes in a blister pack with installation instructions. Stocked in white only.


SLIDING PATIO DOOR LOCK

Two piece metal construction withlight oak finish wooden handle.Mounting screw holes are 3-15/16" center to center. Comes with allinternal parts, mounting hardware andkey plug with two keys. Baked-on white color paint.


SLIDING PATIO DOOR LOCK

Cast aluminum powder painted sliding door lock fits mortised patio door with mounting screw holes 3-15/16” on center. Comes with mortise lock with mounting holes 3-11/16” on center. Has key plug with two keys. Comes with keeper and mounting screws. White only.


UNIVERSAL SLIDING

DOOR LOCK Comes complete with key plug and twokeys. Mounting holes are 3-15/16” on center. Satin aluminum finish withwood pull handle.




UNIVERSAL FLUSH MOUNT

PATIO DOOR LOCK Sliding thumb latchmechanism 6-5/8" mountingholes. Two-piece construction includes internalparts and mounting hardware.Keeper is reversible for rightor left hand doors. RecessedType. Chrome finish withwood pull handle.

Part Number Description Price3-3085 LOCK $11.983-3086 STRIKE PLATE $1.983-3087 WOODEN HANDLE $6.493-3089 KEY PLUG WITH KEYS $2.98

UNIVERSAL INTERNAL

SLIDING DOOR LOCK

Fits 90% of all internally latched doors.Reversible for right or left hand openings.3-15/16" center to center mounting holepattern. Satin aluminum finish with woodpull handle.

Part Number Description Price3-3250 NO KNOCK-OUT FOR KEY PLUG $21.983-3251 HAS KNOCK-OUT FOR KEY PLUG

(Purchase key plug #3-3088 separately)$31.98

SLIDING GLASS DOOR LOCK

These locks fit our currentsliding glass doors. Comeswith key plug & 2 keys. 4-15/16" C to C.

Part Number Description Price3-3252 WHITE $48.953-3253 BLACK $48.95

WOOD HANDLE for

PATIO DOORS Fits locks with 6-5/8" span between mounting holes. Has chrome plated metal mounting arms. Varnished wood handle. Fits 3-3085 lock this page.


KEEPER for

PATIO DOOR LOCK 2-3/4" long x 3/4" wide. Chrome plated die cast metal. Has elongated screw holes for height adjustment.


KEY LOCK PLUG This key lock plug comes with two keys. Fits lock #3-3251 on this page.


KEY LOCK PLUG Comes with 2 keys. Fits lock # 3-3085 on this page.


KEY LOCK PLUG Fits several different style patio door locks. Comes with two keys.




LATCH SLIDING PATIO DOOR

SCREEN DOOR Made of high impact black plastic withgalvanized steel latch arm and catch.Comes with four mounting screws. Fitsseveral manufacturers doors.


MORTISE LOCK Patio Doors

Round end face, adjustable hook, steel housingand hook. Keyway in 45 degree position withhook projecting. Mounting flanges have 6-32 tapped threads. Overall body length is 3-3/16" x 1-1/8" width/depth and 1/2" thick. Mountingscrew holes are 3-11/16" center to center.


MORTISE LOCK Patio Doors

Round end face, adjustable hook, steel housingand hook. Keyway in 90 degree position withhook projecting. Mounting flanges have 6-32 tapped threads. Overall body length is 3-3/16" x 1-1/8" width/depth and 1/2" thick. Mountingscrew holes are 3-11/16" center to center.


FOOT LOCK Sliding Patio Door

Lock attaches to end of sliding door at thebottom of the door with two screws, a holeis drilled into the stationary door to allowthe locking pin to enter when the foot pedalis pushed down. Simply lift the foot pedalto unlock. Made of die cast zinc. Fits allpatio doors, right or left handed. Aluminumcolor.


PATIO DOOR BAR LOCK Satin Finish Self-Storing

Overall length is 48" including end cap The 5/8" square extruded aluminum tube swings 90 degrees andstores out of the way when not in use. The aluminum tube is easilycut with a hacksaw for use with narrow doors. Fits both right hand and left hand doors.


SLIDING PATIO DOOR TRACK REPAIR KIT

This eight foot long stainless steel trackis ¼” diameter and fits snuggly overthe existing track, repairing damagedand corroded track. East to install.




SLIDING GLASS PATIO DOORS

These sliding glass doors are made of thick high quality extrudedaluminum and tempered thermal glass. One group is 72” wide and 76” tall, the other group is 66” wide x 76” tall. Comes with allhardware. Doors are easily reversible from right hand to left handaccess. White finish door has 15 grids per section, 5 over 3configuration. Grids are installed between the thermal glass.Mounting screw hole centers are 5/8” out from the rough openingframe edge. All patio doors are priced with screen door.

72” WIDE x 76” HIGH Net Frame Size: 70-15/16” Wide x 76-1/2” High

Part Number Description Price3-3600 MILL (ALUMINUM) FINISH $559.003-3600B BROWN FINISH $579.003-3600W WHITE FINISH (HAS GRIDS) $636.00

66” WIDE x 76” HIGH Net Frame Size: 64-15/16” Wide x 76-1/2” High

NOTE: Net frame size does not include the 7/8” wide mounting flange.

Part Number Description Price3-3602 WHITE FINISH (NO GRIDS) $539.00

SCREENS FOR SLIDING GLASS DOORS Extruded aluminum frame with nylon mesh screening. Screens arereversible for right hand or left hand access. Screens are 36" wide x75-1/2" high x 7/16” thick overall.

Part Number Description Price3-3697 Mill Finish $69.953-3698 Brown Finish $69.953-3699 White Finish $69.95



SLIDING WINDOWS

Vertical

And

Horizontal

Slide

Exterior

And

Interior

All listed exterior windows aresingle glass, single hung withnylon screening. All-aluminum, mill finish framing, insures yearsof maintenance free, trouble freeservice. The listed storm windows aresingle glass, single hung, designedto be installed on the inside of thehome behind the exterior window,and does not have a screen. Thestorm window framing isconstructed of aluminum withbaked on white paint. Top glass iseasily removed for cleaningpurposes.

WIDTH IS LISTED FIRST, THEN HEIGHT

Part Number Description Price3-3150 14 x 21 WINDOW, VERTICAL SLIDE,

WINDOW WITH SCREEN, MILL FINISH$27.69

3-3100 14 x 27 WINDOW, VERTICAL SLIDE,WINDOW WITH SCREEN, MILL FINISH

$29.29


$36.89


$57.69


$45.29


$56.55


$35.55


$42.35


$51.15


$0.00


$51.15

3-3108W 24 x 27 WINDOW, VERTICAL SLIDE,WINDOW WITH SCREEN, WHITE

$47.95


$41.09


WINDOW WITH SCREEN, MILL FINISH$50.29


$42.89


$43.15


$53.55


$52.19


$54.29


$54.85


$68.95


$68.95

3-3118W 30 x 54 WINDOW, VERTICAL SLIDE,WINDOW WITH SCREEN, WHITE

$85.49


$68.95


$69.19


$67.59


$97.99


$55.09


$66.39


$79.49


$58.89


$59.85


$65.99


$71.79


$83.35


$62.15


$79.99


$89.55


STORM ONLY, WHITE$28.69

3-3401 14 x 40 WINDOW, VERTICAL SLIDE,STORM ONLY, WHITE

$36.09


$56.92


$51.19


$35.89


$45.39


$55.99


$55.29


$42.15


$52.09




STORM ONLY, WHITE$41.79


$44.19


$48.75


$50.79


$51.39


$53.59


$78.49

3-3440 30 x 53 WINDOW, VERTICAL SLIDE,STORM ONLY,WHITE

$78.49


$64.39


$67.75

3-3431 30 x 68 WINDOW, VERTICAL SLIDESTORM ONLY, WHITE

$79.15


$53.79


$64.49


$76.29


$55.95


$63.99


$68.95

3-3426 40 x 54 WINDOW, VERTICAL SLIDE,STORM ONLY,WHITE

$79.95


$69.75


$76.69


$87.95

Part Number Description Price3-3107 24 x 14 WINDOW, HORIZONTAL

SLIDE, WINDOW WITH SCREEN, MILLFINISH

$31.79

3-3110 30 x 14 WINDOW, HORIZONTALSLIDE, WINDOW WITH SCREEN, MILLFINISH

$34.35

3-3155 40 x 14 WINDOW, HORIZONTALSLIDE, WINDOW WITH SCREEN, MILL,FINISH

$39.49

Part Number Description Price3-3407 24 x 14 WINDOW, HORIZONTAL

SLIDE, STORM ONLY, WHITE$30.75

3-3407B 24 x 14 WINDOW, HORIZONTALSLIDE, STORM ONLY,BRONZE

$30.75

3-3410 30 x 14 WINDOW, HORIZONTALSLIDE, STORM ONLY, WHITE

$35.98

ANY WINDOW NOT LISTED IS CONSIDERED SPECIAL ORDER. THERE IS A 30% UPCHARGE.

Bronze Color

Part Number Description Price3-3112B 30 x 27 WINDOW, VERTICAL SLIDE,

WINDOW WITH SCREEN, BRONZE$50.75

3-3116B 30 x 40 WINDOW, VERTICAL SLIDE,WINDOW WITH SCREEN, BRONZE

$0.00


$0.00


$0.00

With Grid


WITH GRID, WINDOW WITH SCREEN,BROWN

$43.95

3-3203 18 x 27 WINDOW, VERTICAL SLIDE,WITH GRID, WINDOW WITH SCREEN,WHITE

$43.95

Obscure Glass & Screen


WINDOW WITH SCREEN, MILL, WITHOBSCURE GLASS

$39.89

3-3201 14 x 40 WINDOW, VERTICAL SLIDE,WINDOW WITH SCREEN, MILL, WITHOBSCURE GLASS

$48.89

WINDOW With

FIXED GLASS

Clear single pane glass is mounted in an unpainted (mill finished)aluminum frame. Glass is stationary and does not open. Roughopening is 36" wide x 8" high.




VINYL WINDOWS

by KINRO

Single hung vinyl windows havefusion welded main frame andsash corners. Bottom sash tilts infor easy cleaning from inside thehome. Clear, insulated thermalglass with warm edge technologyhelps prevent condensation. Lapsiding flange and/or mountingflange can easily be removed forflush mounting of window incertain applications. Windows are2-5/8" thick overall and 1-1/2" from mounting flange to interior ofwindow frame. Windows arepriced with screen.

Part Number Description Size Price3-5601 VERTICAL SLIDE 14" x 27" $89.793-5603 VERTICAL SLIDE 14" x 40" $106.993-5605 VERTICAL SLIDE 24" x 27" $110.983-5607 VERTICAL SLIDE 30" x 27" $128.293-5608 VERTICAL SLIDE 30" x 30" $129.493-5609 VERTICAL SLIDE 30" x 40" $142.693-5610 VERTICAL SLIDE 30" x 53" $170.693-5611 VERTICAL SLIDE 30" x 54" $167.353-5613 VERTICAL SLIDE 36" x 40" $149.993-5615 VERTICAL SLIDE 36" x 54" $172.893-5617 VERTICAL SLIDE 40" x 27" $132.993-5618 VERTICAL SLIDE 40" x 40" $162.993-5619 VERTICAL SLIDE 46" x 27" $146.893-5621 VERTICAL SLIDE 46" x 40" $174.993-5623 VERTICAL SLIDE 46" x 54" $214.993-5640 HORIZONTAL SLIDE 30" x 14" $121.89

WINDOWS Vertical Slide

White Aluminum Lap Siding Flange

These white vertical slidingaluminum windows have singlepane clear glass without any grids.Has a built-in J-channel for lap siding applications. Thesewindows are single hung thereforethe top glass does not move and is not easily removable. Windows are priced with screens.

Part Number Size ROUGHOPENING isWidth x Height

Price

3-3820 30" x 54" 30" x 54" $79.89

PIVOT PIN Vinyl Window

This 2” long metal pivot pin is usedon the bottom of the sash to keepsash in place when tilting sash out.The tip of the pivot pin that fits intothe pivot shoe is 1/4” x 3/16”.Mounting holes are 7/16” center tocenter. Fits Kinro brand vinyl windows.


PIVOT SHOE Vinyl Window

This pivot shoe is attached to the bottom of the balance device and the pivot pin that attaches to the bottom of the sash fits into it, which allows the sash to open out for cleaning purposes. Made of plastic with a red plastic cam. Pivot pin opening in cam is 1/4” x 3/16”. Overall length is 2-1/16” x 31/32” wide x 3/8” thick.




SASH LOCK This brass plated steel sash lock comeswith mounting screws for woodwindow frames. The mounting holesare 1-7/8” center to center.


SLIDE BOLT KIT

(Exterior Window)

For Kinro exterior windows.Used on mill finish, white andbrown painted windows. Kitconsists of: 1-RH slide bolt, 1-LH slide bolt and 2 springs.Made of die cast zinc.


SASH LOCK Vertical Slide Windows

Kinro Brand Sash lock for Kinro brand vertical slidewindows are made of powder paintedzinc. 2-7/8" overall length, 3/4" wideand mounting screw hole spacing of 2-1/4" center to center. One lock perpackage.


TILT LATCHES Vertical Slide Windows

Kinro Brand These tilt latches are for Kinro brandvertical slide vinyl windows. 2-1/2" overall length, 29/32" wide, screw holespacing is 1-3/8" center to center. Made ofhigh impact plastic. Has spring loadedcatch. Package contains one right handcatch, one left hand catch and fourmounting screws.


LOCK & KEEPER Vertical Slide Windows

Carefree Brand by Philips These lock and keeper assemblies come in right hand and left hand. 2-13/16” overall length x 1” wide. 2-1/6” center to center hole pattern. Made of white powder painted metal. One lock, keeper and screws per package.

Part Number Description Price3-3682 RIGHT HAND $2.983-3683 LEFT HAND $2.98



OPERATOR Side Mount with Arm

Part Number Price3-1701RH $6.98

OPERATOR Side Mount

for Round Rod

Part Number Description Price3-1712RH 1/4" HUB PROJECTION $6.983-1713LH 1/4" HUB PROJECTION $6.983-1716RH 1/2" HUB PROJECTION $6.98

OPERATOR Side Mount

for 3/8" Square Rod

We currently stock both of theabove styles under the 3-1714RH number.


OPERATOR Side Mount

Slant Sill Type

For 3/8" Square Rod


OPERATOR Side Mount

For 3/8"

Square Rod


OPERATOR Side Mount

For Round Rod

1/4" Hub Projection


OPERATOR Side Mount

For Round Rod

3/16" Hub Projection


OPERATOR Side Mount

For 3/8" Square Rod

Part Number Price3-2749RH $6.983-2749LH $6.98

OPERATOR Side Mount

For Round Rod

No Hub Projection


OPERATOR Side Mount

Slant Sill Non-Handed

3/16" Hub Projection


OPERATOR Side Mount

For Round Rod

3/4" Hub Projection




OPERATOR Side Mount

For Round Rod

No Hub Projection


OPERATOR Side Mount

For Round Rod

3/4" Hub Projection


OPERATOR Center Mount

For 3/8" Hex Rod

1-1/4" X 1" Mounting Holes



For 5/16" Square Rod

1-1/4" X 1" Mounting Holes



For 1/4" Square Rod

1" X 11/16" Mounting Holes



For 5/16" Square Rod




For 1/4" Hex Rod



OPERATOR Side Mount Rack Style 1-25/32" C to C

Hole Mount


OPERATOR Side Mount Rack Style 1-25/32" C to C

Hole Mount




OPERATOR Side Mount Rack Style

Has Tapped Wide Head


OPERATOR Side Mount Rack Style

Has Tapped Wide Head

1-25/32" C to C

Hole Mount


RACK GEAR OPERATOR KITS Part Number Description Price3-1800K 1-25/32" & 2-1/8" C to C, Mounting Holes $7.893-1801K 1-25/32" C to C, Mounting Holes $7.49

JALOUSIE OPERATOR KIT

Reversible Type


JALOUSIE OPERATORS Casement Mounting Holes

Part Number Description Price3-4115 9" ARM LENGTH LH $14.983-4116 9" ARM LENGTH RH $14.98

JALOUSIE OPERATOR Casement Mounting Holes

Part Number Description Price3-4118 MFG # 818 $9.98

OPERATOR Awning Window

This right hand mount awningwindow operator has a 3-9/16” longarm. Mounting holes are 4-3/4” and3-7/8” center to center. Comes withcrank handle. Aluminum color.




OPERATORS

(For Roof Vents)

Part Number Description Price3-4120 MFG # 805 K ARM LENGTH: 1-12" $15.983-4121 MFG # 806 K ARM LENGTH: 5-3/8" $9.983-4123 MFG # 794 K ARM LENGTH: 4" $9.983-4124 MFG # 814 K ARM LENGTH: 6" $9.98

WINDOW CRANK HANDLE

Plastic

Comes With Screw

Part Number Description Price3-1838 1" LONG $0.493-1881 1-3/4" LONG $0.593-1771 2-1/4" LONG $1.293-1882 2-1/2" LONG $0.793-1712 3-1/8" LONG $1.49

WINDOW CRANK HANDLE

Metal

Comes With Screw

Part Number Description Price3-1889 3/4" LONG $1.793-1795 1-3/4" LONG $2.093-1796 2-3/4" LONG $1.983-1798 3" LONG $2.39

HINGE for

PHILLIPS WINDOWS Sold in Pairs


HINGE for

VENT WINDOW NON-HANDED

Sold EachPart Number Price3-1742 $5.98

HINGE Sold in Pairs

Part Number Description Price3-1729 MFG # 729 $5.98



WINDOW HINGES Sold in Pairs

Part Number Description A F Price3-1786 #786 3/16" W/STUD $5.983-1826 #826 5/16" W/STUD $5.983-1835 #833 3/16" W/STUD $5.983-1836 #835 3/16" NO STUD $5.983-1707 #1707 3/16" NO STUD $5.98



SQUARE ROD 48" LONG

Part Number Description Price3-2754 1/4" SQUARE ROD $9.983-2752 5/16" SQUARE ROD $9.983-2718 3/8" SQUARE ROD $9.98

HEX ROD 48" LONG

Part Number Description Price3-2727 1/4" HEX ROD $9.983-2753 5/16" HEX ROD $9.983-2755 3/8" HEX ROD $9.98

ROUND ROD 48" LONG Part Number Description Price3-2756 1/2" ROUND ROD $11.98

AWNING WINDOW OPERATOR

MOUNTING SCREW

4 PER CARD


JALOUSIE WINDOW OPERATOR

MOUNTING SCREWS WITH NUTS

4 PER CARD


RIVETS

USED IN REPAIR OF JALOUSIE WINDOWS AND DOORS.

8 PER CARD


E-RINGS

Part Number Description Price3-2325E 3/16", 6/PKG $1.293-2328E 1/4", 8/PKG $1.50

GROOVE PINS ALUMINUM BOLTS

WITH E-RING

4 PER CARDPart Number A Price3-1325 7/16" $3.493-1328 13/32" $3.10

SHOULDER BOLT FOR

OPERATOR Includes Plastic Bushing

4 PER CARD

Part Number Description Price3-1326 1/2" Long x 3/8" Dia. $2.793-1327 1/2" Long x 5/16" Dia. $2.79



TORQUE BAR BEARING

Nylon


TORQUE BAR BEARING

Nylon


TORQUE BAR BEARING


TORQUE BAR BEARING


TORQUE BAR BEARING


TORQUE BAR BEARING


TORQUE BAR BEARING


TORQUE BAR BEARING


TORQUE BAR BEARING


BEARING CUP

Part Number Description Price3-1717 SQUARE $1.593-2717 SLOTTED $1.49

BEARING CUP




TORQUE BAR ARM

FITS 3/8" SQ. ROD


TORQUE BAR ARM

FITS 1/2" ROUND ROD


TORQUE BAR ARM

FITS PHILLIPS WINDOWS


TORQUE BAR ARM

FITS 1/2" ROUND ROD


TORQUE BAR ARM

WITH STUD

FITS 1/2" ROUND ROD Part Number Price3-1843 $1.79

TORQUE BAR ARM

FITS 1/4" SQ. ROD


TORQUE BAR ARM

OPEN END

Part Number Description Price3-1724 3/8" SQ. ROD $1.983-2724 3/8" HEX ROD $1.39

TORQUE BAR ARM

Part Number Description Price3-1844 3/8" SQ. ROD $1.393-2844 3/8" HEX ROD $1.39

PUSH NUT


PUSH NUT


LINK

WITH 2 E-RING STUDS (E-RINGS SOLD SEPARATELY)

Part Number Description Price3-1840 1" LONG $1.493-1842 1-1/2" LONG" $1.49

CONNECTING LINKS

PAIR

Part Number Description Price3-1764 4-1/8" $4.983-1765 5-5/8" $5.98

LINK With Threaded Bushing & Screw

Part Number Description Price3-1106 3" LONG $1.79

LINK With Threaded Bushing & Screw

Part Number Description Price3-1851 2-3/4" to 5-1/4" $3.98



Plastic

RETAINING CLIPS FOR

SCREEN AND STORM Includes mounting screws 10 clips/screws per pkg.

Part Number Description Price3-1492 FLUSH $1.393-1496 1/4"OFFSET $2.493-1498 3/8"OFFSET $2.49

Metal

Part Number Description Price3-8455 FLUSH $0.903-8485 5/16"OFFSET $1.983-8505 3/8" OFFSET $1.98

Spring-Steel Clip

STORM WINDOW CLIP This zinc coated spring-steel clip is used to secure onestyle of older Philips brand fixed panel stormwindows. Measures 7/32” wide x 7/8” long.


White Aluminum Clip

STORM WINDOW CLIP This white extruded aluminum clip is used tosecure one style of Philips brand fixed panelstorm windows. Measures 1-1/16” wide x 1-1/2”.


RETAINING CLIP This 1” long x 3/4” wide clear plastic clip is used onElixir brand full-view storm doors to hold glass inplace. Comes with screws and packaged six (6) perbag.


Pivot Pin Set

PIVOT PIN SET

2 PER CARD


PIVOT PIN SET

2 PER CARD


Bottom Pivot

BOTTOM PIVOT

1 PER CARD


Top Pivot

TOP PIVOT

2 PER CARD


Top Guide Wheel

TOP GUIDE WHEEL

2 PER CARD


Top Plunger Pin

TOP PLUNGER

PIN For use in the top of wood bi-fold doors. Overall length is 1-3/4" x 3/8" diameter. Serrated section is 1-1/16" long. Made of plastic. One per package.




Pivot Pin

PIVOT PIN

2 PER CARD


PIVOT PIN

2 PER CARD


FOR WINDOWS, DOORS AND ALL OUTDOOR

ENCLOSURES. EASY TO INSTALL.

SOLD BY THE FOOT

Part Number Description Price3-3163 36" WIDE $0.973-3167 48" WIDE $1.23

SCREEN SPLINE

5/32" WIDEPart Number Price3-1156 $0.05

SCREEN INSTALLATION TOOL


TOP HANGER ACME BRAND

2 PER CARD


BOTTOM GUIDE ACME BRAND

2 PER CARD


TOP HANGER COX BRAND

2 PER CARD


BOTTOM GUIDE COX BRAND

2 PER CARD




TOP HANGER ACME BRAND

2 PER CARD


BOTTOM GUIDE ACME BRAND

2 PER CARD


TOP HANGER COX BRAND

2 PER CARD


BOTTOM GUIDE COX BRAND

2 PER CARD


DOOR HANGER

END MOUNT

ADJUSTABLE BRACKET

2 PER CARD


HEAVY DUTY HANGER FORSLIDING DOORS


DOOR HANGERS

Metal frame with 7/8" oval nylonrollers.

2 PER PKG.

Part Number Description Price3-1462 1/2" OFFSET $2.293-1463 3/4" OFFSET $1.98

DOOR TRACK

For by-pass closet doors. Extruded aluminum 14 ft. long.

Part Number Description Price3-1461 DOUBLE $13.98



PATIO DOOR ROLLER ASSEMBLY

Housing thickness (width) as shownbelow and 1-1/8" high at rear, 1-3/8"high at wheel end and 2-5/8" housinglength. 1-1/2" diameter ball bearingconcave steel wheel.

Part Number Description Price3-1180 3/4" THICK $5.983-1911 13-16" THICK $7.983-1922 11-16" THICK $10.98


5/8" Thick, 1-1/8" High,

1-1/4" Dia. wheel.



Housing is 3/4" wide, 1-1/8" High inrear of assembly and 1-3/8" high infront. Body of assembly is 2-5/8"long. 1-1/4" Diameter ball-bearingconcave steel wheel.



Steel housing is 3/4" wide, 1-3/16" high and 2-1/8" long. Has a 1-1/4” diameter ballbearing concave steel wheel.



Steel housing is 3/4" wide, 1-3/16" high and 2-5/32" long with a 1-1/4” diameterball bearing concave steel wheel.



1-3/8" High, 1-1/2" Dia. wheel.


PATIO DOOR ROLLER ASSEMBLY TANDEM ROLLERS

Two 1-1/4" diameter ball bearingconcave steel wheels. 3-1/16" overall housing length x 11/16" thick x 1" high. Roller height is adjustable. Fits Kinro brand 7500 series aluminum sliding glass patio doors.


PATIO DOOR ROLLER ASSEMBLY TANDEM ROLLERS

Two 1-1/4” diameter ball-bearing concave steel wheels. 3-1/8” overall housing length x 11/16” thick x 1” high. Roller height is adjustable. Fits Kinro brand vinyl sliding glass patio doors.



Steel housing is 9/16” wide, 1-1/16” high and 1-3/4” long. Has a one inch diameterconcave ball-bearing steel wheel. Roller height is adjustable.


SEALED BALL BEARING ROLLER WHEELS

Sealed ball-bearing patio door wheels have a 1/4" diameter center hole. Wheels are 5/16" wide x diameter listed below. All wheels have a concave contact surface.

Part Number Description Price3-1186 STEEL, 1-1/4" DIA. $3.983-1185 STEEL, 1-1/2" DIA. $3.983-1122 NYLON, 1-1/4" DIA. $2.89



ROLLER ASSEMBLY SLIDING SCREEN DOORS

2 PER PKG.


ROLLER ASSEMBLY SLIDING SCREEN

DOORS

1” DIA. STEEL WHEEL Priced Per Each



1" DIA. NYLON WHEEL

2 PER PKG.


ROLLER ASSEMBLY Kinro Screen Doors

Fits screen doors for late model Kinro brandsliding glass patio doors. Metal frame is 2”overall length x 5/16” wide with a 1”diameter concave nylon wheel. Priced pereach.


ROLLER ASSEMBLY Kinro Screen Doors

Fits screen doors for Kinro Sliding Glass Doors. Frame is made of high impact moldedplastic. The one inch diameter concave wheelis made of nylon. Sold in Pairs.



FITS KINRO DOORS


Latch Lock

LOCK LATCH FOR

WINDOWS

Made of nylon.

Black in color.

Sold in pairs.


Sash Lock

SASH LOCK FOR

WINDOWS

Made of nylon.


DOOR GUIDE FLOOR MOUNT

For use with

by-pass closet doors.

Made of nylon. Part Number Price3-4110 $1.49



WALL PROTECTOR PLATES

Protect and prevents wall damage fromdoor knobs. Made of hi-impact plasticwith self-adhesive foam back thatcushions door handle impact.

Part Number Description Price3-4131 3-1/4" DIAMETER $0.983-4132 5" DIAMETER $1.49

White Rubber

DOOR STOP White Rubber

This wall mount rubber door stop is 1-3/4" diameter. Has peel-off self-stick back.Comes in white only.


Brass Plated Zinc

DOOR STOP

Brass Plated Zinc.

3" long with rubber tip.

Wall mount.


Angle Type

DOOR STOP ANGLE TYPE

Floor Mount

This angle type floor mount door-stop stands three inches tall, has a rubberbumper that will not scratch door.Mounts with three screws. Screws notincluded.

Part Number Description Price3-4126 POLISHED BRASS $1.983-4130 SATIN NICKEL $1.98

Cone Shape Spring

CONE SHAPE SPRING

DOOR STOP

Separate screw and base plate for ease of installation. Brass plated steel. Has white rubber tip. Wall mount. Comes in 3" and 4" long sizes.

Part Number Description Price3-4127 3" LONG, BRASS PLT'D $1.493-4127-4 4" LONG, BRASS PLT'D $1.693-4127SN 3" LONG, SATIN NICKEL $1.49

Flexible Brass Plated Metal

DOOR STOP FLEXIBLE

Brass Plated Metal.

3" long with plastic tip.

Wall mount.


Hinge Pin

HINGE PIN DOOR STOP

Comes with white rubber bumper tip and white plastic spacer. Adjustment can be set to stop door at desired angle. Fits most door hinge pins. Brass plated steel.




DOOR STOP With

WEATHERSTRIP This white extruded aluminum door stophas 9/16" wide x 1/4" thick white closedcell foam weather stripping along it’snarrow (1/2" wide) side. The wide sideof the door stop (7/8" wide) haselongated screw holes at 10-3/4" intervals. Overall length is 77-1/2".


DOOR SEAL KIT Vinyl Clad Foam

Foam replacement kit for kerfed-type entrance doors. The seal is composed of acellular foam core and is clad in anembossed, non-vinyl paint resistant liner. Cellular core stays soft in low temperatures.Seals the strike side, hinge side and headerwhile maintaining a tight seal. Kit containstwo 81" long pieces and one 37" long piece.White.


HINGE-SIDE FRAME For

ELIXIR STORM DOORS These 78" tall extruded aluminum hingeside frames come with four attachedhinges. Can be used on left or right sideof door. When cutting height to fit, cutequal amounts off of top and bottom.Mounting holes are pre-punched. Hasfelt weatherstripping pre-installed.

Part Number Description Price3-4195 MILL FINISH $31.983-4195B BROWN FINISH $35.693-4195W WHITE FINISH $35.69

THRESHOLD

ALUMINUM This extruded aluminumthreshold is 4" wide x 38" long.Used on many of Elixir brandcombination doors. May cut todesired length.


SURROUND KIT Philips Combo Doors

These white extruded vinyl surrounds are made to fit Philips brandcombination entry doors. Top and bottom pieces are cut to 38inches while the side pieces are cut to 82 inches. Both side andbottom pieces may be cut to fit any size door up to 38” x 82”.Stick–on weather-stripping will need to be added to the lip what seals against the door facing and two rubber sill flaps will need tobe added to the bottom piece. The weather-stripping and sill rubber is sold separately.

Part Number Description Price3-4190 SURROUND KIT (All 4 Pieces) - 38" x

82"$39.95

3-4191 SURROUND KIT (Less Bottom Piece) -38" x 82"

$33.95



DOOR SWEEP FOR 1-3/4 INCH THICK ENTRY DOORS

This 1.77" wide vinyl door sweep has four .575" long flexible vinyllegs that create an excellent seal against water, air and dust. Dripleg diverts water away from threshold. The inside flange hasslotted holes for attaching sweep to the door. A round bulb likeseal runs the entire length of the outside edge of the sweep thatprevents water from entering the area between the door and sweep.Overall length is 36-1/2". Comes with screws. White color.


DOOR SWEEP FOR

6-PANEL STEEL DOORS

Designed to fit the bottom of Elixir 6-Panel steel doors. Two fasteners fitinto two slots cut into bottom of door.Cream color.

Part Number Description Price3-4157 31-7/8" Long x 1-5/8" Wide $5.983-4156 36" Long x 1-5/8" Wide $7.98

DOOR SWEEPS

Part Number Description Price3-4160 Extruded Aluminum Mill Finish With

Flexible Vinyl Insert., 37" Long. $5.39

3-4161 Extruded Bright White Rigid Vinyl WithWool Pile Insert., 37" Long.

$5.39

3-4163

NA

DOOR SWEEP Extruded Vinyl

35-1/4” Long This 35-1/4” long U-shaped white extruded vinyl storm door sweep is 1-1/4” wide at inside bottom, sides are 1-1/2” high and the soft vinyl flap is 7/8” wide.

Part Number Description Price3-4163 Extruded Vinyl 35-1/4" Long $15.98

Screen Framing

SCREEN FRAME & CORNER KEYSPart Number Description Price3-4147 Box Type, Wh. Finish,12’ Lengths $7.983-4148 Box Type, Mill Finish, 12’ Lengths $6.993-4149 Box Type, Bro. Finish, 16’ Lengths $6.993-4150 “L” Type, Bro. Finish, 12’ Lengths $6.93

Corner Keys

Corner Keys for above Framing (4 Keys and 2 Tensioning Springs Per Pack). Box Screen Frame Size: 1/4” thick x 9/16” wide overall Part Number Description Price3-4152 Gray $1.983-4153 White $1.983-4154 Black $1.98

SLIDE BOLTS & CORNER KEYS FOR STORM WINDOWS

Part Number Description Price3-4155 Kit contains 2 slide bolts, (one right and

one left), two corner keys, two swivelkeys and two springs. Made of plastic. KINRO BRAND

$2.98



GLAZING CHANNEL

Part Number Description Price3-4168 1/16" Wide x 5/16" Deep $0.243-4169 1/16" Wide x 3/16" Deep $0.00

Stair Nose Molding

STAIR NOSE

MOLDING

1-3/16" serrated top helps preventslipping. 36" long.

Part Number Description Price3-4158 ALUMINUM $3.983-4159 BRIGHT GOLD $4.99

Wool Pile

WOOL PILE WEATHER-STRIPPING

PRICED

PER FOOT

This wool pile weather-stripping fits into a 1/4” wide track. Woolpile is 1/2” deep and 1/2” wide atwidest point. Gray colored softtouch bristles. Sold per foot.


Foam Tape

FOAM WEATHER- STRIPPING

TAPE

Part Number Description Price3-4164 3/8" Wide x 3/16" Thick, 17 Feet Long $2.393-4165 3/4" Wide x 3/16" Thick, 17 Feet Long $4.94

Header Vinyl

WEATHER SEALERS

Part Number Description Price3-4170 Header Vinyl, Priced Per Foot $0.36

Jam Vinyl

WEATHER SEALERS

Part Number Description Price3-4171 Jam Vinyl, Priced Per Foot $0.29

Header & Sill Vinyl

WEATHER SEALERS

Part Number Description Price3-4172 Header & Sill Vinyl, Priced 10 ft. per roll $5.89

WEATHER SEALERS

Part Number Description Price3-4173 Header & Sill Vinyl, Priced Per Foot $0.27



WINDOW GLAZING Snap-in Type

Philips Windows This “U” shaped glazing comes in black metal and white vinyl. Black metal is sold in twelvefoot (12’) lengths. Had to be cut to six foot (6’)lengths for shipping purposes. White plastic issold in six foot (6’) lengths. Both measure 5/16”wide x 3/8” high.

Part Number Description Price3-4174 BLACK METAL $4.983-4175 WHITE VINYL $4.98

3-4176

WINDOW GLAZING Snap-in Type White Vinyl

Sailor Windows Window & Door Windows

White vinyl snap-in glazing comes in 12 ft.long pieces. Used in Sailor windows andWindow & Door Company’s windows. 9/16”wide (curved part) x 5/16” high.

Part Number Description Price3-4176 WHITE VINYL $4.98


Kinro Windows Brown painted aluminum snap-in glazing comes in 12 ft. lengths for use on Kinro brandbrown vertical slide outside windows. 9/16”wide (curved part) x 5/16” high.

Part Number Description Price3-4177 BROWN METAL $4.98


Kinro Windows This extruded vinyl window glazing is 9/16”wide (top flat area) and comes in twelve foot(12’) lengths. Used in Kinro’s mill finishand painted white aluminum exteriorwindows. We stock white only.

Part Number Description Price3-4178 WHITE $6.983-4178B BROWN $4.98


Kinro Vinyl Windows Extruded vinyl window glazing is 13/16” wide (curved part) x 1/4” high. Comes in ten foot (10’) lengths and is used with Kinro’s vinyl windows. We stock white only.


Double Face Tape

DOUBLE FACE TAPE Very aggressive-stick double face tape is designed to secure thermal glass in place in vinyl windows. This 3/8” wide x 3/32” thick closed cell foam-core tape has easy release liner. Comes in 100 ft. rolls, but we cut to length and sell per ft.


CLOSET RODS Adjustable

Galvanized Steel Heavy gauge, no sag construction, ample overlap insures greaterstrength. Both galvanized steel tubes are same length. Hook flange insures proper and accurate fit. 1” O.D. tubes.

Part Number Description Price3-1480 30" to 48" $4.903-1482 48" to 72" $6.39



Documents

COMBINATION DOORS by ELIXIR - Triad Mobile Home …triadmobilehomesupply.com/catalog/section_05.pdf · Flat Panel Combination COMBINATION DOORS by ELIXIR All combination doors have