Upload
syed-usman
View
243
Download
1
Embed Size (px)
Citation preview
8/2/2019 Column Detailing
1/16
aadspro
COLUMN DETAILING
This chapter provides a step-by-step tutorial for the design
and detailing of columns in one floor of a multi-storied building
1.1 Description of the problem
1.2 Steps involved in Staad
1.3 Steps involved in aadspro
1.3.1 Column Schedule
1.3.1. a) Result
1.3.2 Column Detailing
1.3.2. a) Result
8/2/2019 Column Detailing
2/16
aadspro
1.1Description of the problem
The structure for this problem is a double storied building; in which the ground floor column is
to be designed (fig .1.1.1). A Staad file COLUMN exists for this problem.
Fig.1.1.1
1.2 Steps involved in Staad
8/2/2019 Column Detailing
3/16
aadspro
The following two is required for the design of column in aadspro,
a) Staad outputs (.anl)
b) Staad database (.mdb)
a) Staad output file
In Staad, open the file COLUMN.
EnterTRACKand DESIGN COLUMN commands for the selected columns to create an .Anl file.
Go to Post Processing Mode .
b) Creating Staad Database
In Staad, open the file COLUMN.
Select Tools>Advanced Query for Staad.pro version 2004 & lower (fig.1.2.1) or Select
Tools>SQL Query>Advanced Query for Staad.pro version 2006 & higher (fig.1.2.2).
Fig .1.2.1
8/2/2019 Column Detailing
4/16
aadspro
Fig .1.2.2
8/2/2019 Column Detailing
5/16
aadspro
1.3 Steps involved in aadspro
Open aadspro. (AutoCAD will be open automatically)
Select Column from main menu and Column Detailing from drop down menu.
Select the model type as Staad Pro(fig1.3.1)
Fig 1.3.1
Select Exclude for excluding foundation column (ie.pile or footing) (fig1.3.2)
Fig 1.3.2
Select if staad proversion is above 2004.
Select to import staad database. Select the database COLUMN(fig1.3.3)
Fig 1.3.3
Import Anl file by selecting again. Select the Anl file COLUMN(fig 1.3.4)
8/2/2019 Column Detailing
6/16
aadspro
Fig 1.3.4
Load Cases plate will be appeared after importing both Database and Anl file (fig
1.3.5).Select the load cases for the design of column. close this plate.
Fig 1.3.5
Column Detailing consists of nine plates, viz. Column Data, Output, Column Design,
Design Missing Column, Column Summary, Column Groups, Broken Column, Bardia,
and BBS.
8/2/2019 Column Detailing
7/16
aadspro
Design missing columns are shown in Design Missing Column plate. Program
assumes values for bar diameter, number of bar, cover, diameter of tie bar, tie spacing
etc. or user can type a new value (fig 1.3.6).
Fig 1.3.6
Select for updating the data. Details of design missing columns are
transferred to Column Design plate.
All the staad inputs will be automatically transferred to Column Data plate which
includes member incidences, joint coordinates (fig 1.3.7).
Fig 1.3.7
All the Staad outputs will be automatically transferred to the Output plate which
includes node, axial force (Fx), Moment in Y and Z direction (My & Mz) (fig.1.3.8).
8/2/2019 Column Detailing
8/16
aadspro
Fig 1.3.8
All the design details are automatically transferred to Column Design plate (fig.1.3.9).
Fig 1.3.9
Column nodes, size of column, Diameter of bar, number of bars, height of column etc.
are transferred to Column Summary plate (fig.1.3.10).
8/2/2019 Column Detailing
9/16
aadspro
Fig 1.3.10
Message box will be shown if broken column is there and program automatically joins
the broken columns.
Broken column details such as column name, start node, end node and details of joined
column such as column name, start node, end node etc. are shown in Broken Column
plate.
Diameter of bar used in each story and column number corresponds to each storey is
shown in Bardia plate (fig.1.3.11). User can change the diameter of bar used in each
story by typing a new value and enter to update the data. While updating this bar
dia will automatically come on Pile Design plate.
Fig 1.3.11
8/2/2019 Column Detailing
10/16
aadspro
Select to get Options-Column plate (fig 1.3.12). In this plate tick
and choose either for designing all
columns using aadspro or for designing columnshaving no design in staad using aadspro.
In Options-Column plate select reinforcement details such as starting and ending
number of reinforcement, minimum percentage of steel, diameter of bar etc. If this bar
dia or number of reinforcement is not sufficient for the design, message box will be
shown. Then increase bar dia or number of reinforcement.
Enter level of column to be designed either by selecting or in
the Options-Column plate. If ground floor column is to be designed
select and enter storey from 1 to 1.
Fig 1.3.12
Enter to start the column design.
To get the column design available in staad itself enter
8/2/2019 Column Detailing
11/16
aadspro
1.3.1 COLUMN SCHEDULE
Column Plus plate will be appeared after design is completed. (Fig 1.3.13).
Fig 1.3.13
In Column Plus plate,
o to draw layout of structure in AutoCAD.
o to draw beams connecting the columns in the
layout.
o Select and enter to groupthe columns (fig 1.3.14).
o Select the story corresponds to the required level of column detail E.g. if
ground floor column is to be drawn select story from 1 to 1.
o Saved excel file can be imported using
o draws the column schedule in AutoCAD.
8/2/2019 Column Detailing
12/16
aadspro
Fig 1.3.14
1.3.1. a) RESULT
Pick a point as per the AutoCAD Command.
Column schedule (fig 1.3.15) and Column layout (fig 1.3.16). is obtained.
Percentage of reinforcement is shown on the right side of column schedule.
630,631,634 etc. are representing column number.
Fig 1.3.15
8/2/2019 Column Detailing
13/16
aadspro
Fig 1.3.16
1.3.2 COLUMN DETAILING
In Column Detailing plate,
Enter characteristic values of concrete and steel, i.e. fck= 30Mpa and fy = 415 Mpa.
Enter L Bend Length (L shaped bend at the bottom point of column) and cover.
Select beam depth ie. the depth of beam at column intersection.
o program takes minimum depth of beam at the intersection.
o program takes maximum depth of beam at the intersection.
o user can enter a new depth by selecting this, say 400.
to draw column detailing along width side.
8/2/2019 Column Detailing
14/16
aadspro
to draw column detailing along depth side.
to get layout of structure.
to get cross section of column.
Enter for bar bending schedule. User can enter Starting Bar No as per
requirement. Default starting number is 100.
If we select merge sides, width side and depth side detailing starts simultaneously.
Otherwise depth wise detailing starts after completing width wise detailing only.
Enter for grouping columns.
Enter to get beams connecting columns in the layout of structure.
scaling factor in which column section is to be drawn.
Enter for lapping reinforcement as per IS Code. Economy means lapping
take place after completing its unsupported bar length.
Left alignment means flush the columns along the left side. Right means flush along
right side. Center means column center will be same.
In Column groups plate mark the group to be drawn in AutoCAD.
Enter to draw column detailing in AutoCAD.
BBS plate gives the Bar bending schedule for the problem.
option saves the schedule to Excel.
1.3.1. a) RESULT
Pick a point as per the AutoCAD Command.
Column Detailing (fig 1.3.17) and Column layout (fig 1.3.18) is obtained.
Column height is shown on the left side of column detailing.
641,706,637,703 etc. are representing column number.
100, 103, 104 etc. represents bar bending number.
8/2/2019 Column Detailing
15/16
aadspro
Fig 1.3.17
8/2/2019 Column Detailing
16/16
aadspro
Fig 1.3.18