Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Dry-build retaining walls with a ‘naturally textured’ stone cut finish
Anchor Vertica
457 x 200mm
200 x 75mm
438 x 100mm
Frost Resistant
No Reinforcement
<1.0m
retaining walls
COLOURS + FINISHESA
nchor®
Vertica®
colo
urs + finishes
COLOURS
SPECIFICATION REFERENCE: NBS PLUS: 45-25-66/320 Precast concrete interlocking blocks D41 Crib walls, gabions and other gravity retaining walls - 310 DRYSTACK INTERLOCKING MASONRY
BASALT CASHEL
CANELLETTO
For ‘Stock Information’ on colours availability - see page 4.
AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E [email protected] 015 1
Dry-build retaining walls with a ‘naturally textured’ stone cut finish
Anchor Vertica
457 x 200mm
200 x 75mm
438 x 100mm
Frost Resistant
No Reinforcement
<1.0m
retaining walls
TECHNICAL INFORMATIONA
nchor®
Vertica®
technical inform
ation
All Vertica® 24N/mm2 blocks are suitable for any project not requiring Highways Authority approval.
STANDARDS + PERFORMANCEOur segmental retaining wall products are regularly tested to record important physical characteristics and to comply with product specific performance criteria. The durability and performance of Anchor® blocks is assured by meeting or exceeding targets for compression strength and water absorption.
Product Type Dry-build retaining walls with a ‘naturally textured’ finish.
Manufactured to BS EN 771-3:2011+A1:2015 - Specification for masonry units.
Efflorescence State-of-the-art factory controlled vapour curing significantly reduces this naturally occurring chemical reaction.
If you need further assistance please consult our Technical Department.
SUSTAINABILITYEnergy Use 100% renewableWater Used 100% rain water harvestingRecyclable 100% of this product can be recycledManufacturing Produced in the UK from locally sourced
materialsRecycled Aggregate Content: 65%Waste Wood + Plastic: 100% recycledCarbon Footprint We have a new state-of-the-art washing
plant which enables AG to produce walling from 100% recycled waste aggregate. Please contact our Technical Specification Department if you are interested in specifying such a product
BREEAM ‘A’ Rating – in accordance with the BRE Green Guide to Specification.
AG RECOMMENDATIONSColour blending
Products should be mixed on site from a minimum of 3 packs to help reduce the effect of banding.
ADVICE + GUIDANCEFor advice and guidance on ordering, installation, good site practice, etc. visit our website: professional.ag.uk.com/advice+guidance
For maintenance guidance and health and safety advice visit our website: professional.ag.uk.com/maintenance
GRAVITY / ENGINEEREDGravity (max 1m) Engineered (above 1m)
LICENCEAnchor® blocks (excluding the Double Sided unit) are manufactured under licence from Anchor Wall Systems.
Vertica®
standard / machine install / double sided†
Vertica®
BBA approved
Vertica® BBA blocks meet the requirements of the Highways Authority as set out in the D.C.H.W. handbook.
STANDARDS + PERFORMANCEThe Anchor® Vertica® BBA certified retaining wall block has a minimum 28 day compressive strength of 40N / mm2, and satisfies the durability requirement of class XF2 in accordance with BS 8500-1:2015.
When designed in accordance with BS 8006-1: 2010, Annex B, the design life of an Anchor® Vertica® BBA wall is 120 years.
Durability and performance of the Anchor® Vertica® BBA retaining wall block is assured by AG, having agreed with the BBA a quality control procedure. Further details can be obtained from our Technical Department.
† Vertica Double Sided block is not an Anchor® certified product.
AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E [email protected] 015 2
Dry-build retaining walls with a ‘naturally textured’ stone cut finish
Anchor Vertica
457 x 200mm
200 x 75mm
438 x 100mm
Frost Resistant
No Reinforcement
<1.0m
retaining walls
FEATURES + BENEFITSA
nchor®
Vertica®
features + benefi
ts
VERTICA® DOUBLE SIDED BLOCK†
New to our Vertica® range is a ‘double sided’ block, which enables a 0º / vertical wall to be constructed without mortar with the same textured finish on both sides:
• The Double Sided block is recommended for finishing the final course of a normal Vertica retaining wall when both sides would be visible.
• Split the Double Sided block in half to create an aesthetically pleasing stop end block for a normal Vertica retaining wall - an alternative to curving your wall in to the bank.
• The Double Sided block can also be used as a temporary barrier providing way leave access.
• The Double Sided block can be used as a self-supporting, freestanding, mortarless wall – not retaining.
† Vertica Double Sided block is not an Anchor® certified product.
VERTICA® MACHINE INSTALLAnchor® Vertica® can now be installed mechanically using a special clamp in conjunction with an excavation digger. The benefits include:
• Cost of installation is reduced significantly onsite + reduced labour costs.
• The safest way to lift and install a product is important with CDM (the legal regulator for construction H&S). The specifier has a duty of care to select the installation method least likely to result in human injury. AG’s SRW ‘machine installation’ is the safest option and the least likely to cause injury.
• Segmental retaining wall ‘machine installation’ is exclusive to AG.
• Vertica® can be packaged to suit machine installation at no extra cost.
• Machine installation can be as much as 2 to 3 times faster than traditional methods of segmental retaining wall installation.
Please contact our Technical Specification Department for more information.
VERTICA® STANDARD BLOCK• A distinctive design allows taller wall construction in incredibly
tight spaces. Use in developments or where space is at a premium.
• The 4º block has anti-climb benefits – designed with playgrounds in mind.
• The Stone Cut finish uses patented technology to create a ‘crunched’ finish, similar to natural stone.
• Variety of warm earth tone colours available and a natural textured finish.
• Mortarless and pinless – built with no mortar or concrete, the unique dry build locking system allows fast track construction in all weathers. This means quicker installation rates than traditional brick and blockwork.
• Features a patented locating lug that acts as a guide to ensure accurate alignment and precise set back every time.
• Suitable for all retaining walls – from low height landscape to tall commercial walls.
• The capping block is shaped asymmetrically (tapered), making capping straight or curved walls much easier.
AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E [email protected] 015 3
Dry-build retaining walls with a ‘naturally textured’ stone cut finish
Anchor Vertica
457 x 200mm
200 x 75mm
438 x 100mm
Frost Resistant
No Reinforcement
<1.0m
retaining walls
STOCK, INSTALLATION + MANUFACTURING INFORMATIONA
nchor®
Vertica®
stock info
rmatio
n
STOCK INFORMATION
BlocksSet back / Face angle(degrees)
Minimum inside radius (to back of block on bottom course)
Minimum outside radius (to front of block on bottom course)
Tolerances on all dimensions (mm)
Face finish
Face geometry
no. per m2 / lm
VERTICA® STANDARD / MACHINE INSTALL BLOCK 4° 2.4m 1.8m ±2mm Stone cut stretcher 10.9 per m2
DOUBLE SIDED BLOCK 0° N / A N / A ±2mm Stone cut stretcher 10.9 per m2
CORNER BLOCK N / A N / A N / A ±2mm Straight split stretcher N / A
CAP BLOCK N / A N / A N / A ±2mm Straight split stretcher 2.7 per Lm
SHORTCUTTM CAP N / A N / A N / A ±2mm Straight split stretcher 5.4 per Lm
N / A – Not applicable.
INSTALLATION DATA
Producttype
Length(mm)
Depth(mm)
Height(mm)
Available Finishes
InStock
Available Colours
m2 per pack
Units per pack
Unit weight(kg)
Weight per pack (t)
Packs per 8 wheeler
Packs per unit lorry
VERTICA® STANDARD BLOCK 4°
457* 280 200 Stone Cut Yes Basalt / Cashel / Canelletto 2.92 32 38 1.22 10IRE 14 / GB 22
VERTICA® MACHINE INSTALL#
BLOCK 4°457* 280 200 Stone Cut Yes Basalt / Cashel / Canelletto 2.92 32 38 1.22 10
IRE 14 / GB 22
VERTICA® DOUBLE SIDED BLOCK
457 280 200 Stone Cut Yes Basalt / Cashel / Canelletto 2.1 24 42 1.008 14IRE 20 / GB 22
CORNER BLOCK 457 228 200 Straight Cut Yes Basalt / Cashel / Canelletto N / A 40 44.5 1.82 12
IRE 14 / GB 14
CAP BLOCK 438** 254 100 Straight Cut Yes Basalt / Cashel / Canelletto N / A 48 20 0.94 14
IRE 20 / GB 22
SHORTCUTTM CAP 200*** 330 75 Straight Cut Yes Basalt / Cashel / Canelletto N / A 120 10.3 1.236 10
IRE 14 / GB 21
* The Vertica® Standard / Machine Install / Hand Block ‘short side’ is 350mm in length.** The Cap Block ‘short side’ is 303mm in length.*** The ShortCutTM Cap ‘short side’ is 175mm in length.# Vertica® Machine Install can also be installed by hand (as per Standard Vertica®). N / A – Not applicable.
MTO – Made to order (minimum quantity required).BBA Approved Vertica is available as MTO.
MANUFACTURING Anchor® segmental retaining wall blocks are manufactured from locally sourced, high grade aggregates. Using the latest computerized mixing systems ensures colour and strength consistency. The naturally textured finish of the Vertica® range is due to the most modern computer-controlled manufacturing process. POM: Made at our Fivemiletown production plant. Machine Install: made in our Dungannon production plant.
CERTIFICATION
ISO 9001 Quality Management.ISO 14001 Environmental Management.ISO 45001 Occupational Health and Safety Management.CE Marking Download our Declaration of Performance (DOP) data at:
www.ag.uk.com/cemarking HAPAS + BBA The Vertica® Wall System is HAPAS and BBA Roads + bridges
certified for use in conjunction with Enkagrid PRO geogrids. Agreement Certification No. 04/R138. View/download data at: https://ag.uk.com/retaining-wall/anchor-vertica/
AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E [email protected] 015 4
Dry-build retaining walls with a ‘naturally textured’ stone cut finish
Anchor Vertica
457 x 200mm
200 x 75mm
438 x 100mm
Frost Resistant
No Reinforcement
<1.0m
retaining walls
PROFILESA
nchor®
Vertica®
pro
files
PROFILES
The stone face is naturally textured to give the wall a weathered appearance.
457
228
200
457
CORNER BLOCK
438
254
100
CAP BLOCK
303
SHORT CUT CAP
175
200
330
75
DOUBLE SIDED BLOCK (NATURALLY TEXTURED ON BOTH SIDES)
200
457280
VERTICA® STANDARD BLOCK
200
280
457
350
457
AG.UK.COM T 028 8778 4208 | GB Sales T 0121 747 0202 | E [email protected] 015 5