Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
《Color-Analysis System》Installation and User Manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
0
Contents
I. Installation............................................................................................................................1
1. The Installation of Color-Analysis System................................................................1
2. Driver Installation.......................................................................................................3
II. System Function..............................................................................................................5
Interface Instruction ...............................................................................................................5
Menu Instruction.....................................................................................................................6
1. File ................................................................................................................................6
2. Correction ....................................................................................................................6
3. Setup.............................................................................................................................7
4. Measurement .............................................................................................................10
5. Data Transmission.....................................................................................................12
6. Standard Database ....................................................................................................14
8. Help ............................................................................................................................15
III. Other Functions ..........................................................................................................16
1. The renaming , Deletion of Standard /Testing Sample...........................................16
《Color-Analysis System》Installation and User Manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
1
I. Installation
1. The Installation of Color-Analysis System
Step 1: CD into the CD-ROM drive, the interface of installation pops-up automatically, and select its version;
Figure 1
Step 2: Choose【3】to install the《the Color-Analysis System》;
Figure 2
《Color-Analysis System》Installation and User Manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
2
Step 3: Installation; Click “Next” to continue.
Figure 3
Step 4: Completion Click “Finish” to exit Setup and launch COLOR-ANALYSIS SOFTWARE
Figure 4
《Color-Analysis System》Installation and User Manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
3
2. Driver Installation
Step 1: Choose [2] driver;
Figure 5
Step 2: Select the corresponding driver according to your computer system;
Figure 6
Step 4: Installation according to tips;
Figure 7
《Color-Analysis System》Installation and User Manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
4
Step 5: Completing Installation.
Figure 8
Installshield wizard completing Installshield wizard has been installed UsbDriver_XP_32bit, Click “Finish” to exit wizard.
《Color-Analysis System》Installation and User Manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
5
II. System Function Interface Instruction 1. Menu 2. Toolbar 3. Information bar 4. Measuring Interface 5. Measuring Button
Figure 9
《Color-Analysis System》 Installation and user manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
6
Menu Instruction
1. File
Figure 10
New Measurement: Newly create a measurement Open: Open the measuring files saved Save/Save as: Save measurement as a file format Print(P)/ Print Preview(V)/Print settings(R): Print measuring content in a fixed format. Export excel: Export measuring content into excel format
2. Correction
Figure 11
White Correction:White correction for instrument, click on the command, the following dialog pops-up; The standard whiteboard into the measuring position of instruments, then click the "Start"button below to white correction for instrument.
《Color-Analysis System》 Installation and user manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
7
Figure 12
Black Correction:Black correction for instrument, click on the command, the following dialog pops-up; The standard blackboard into the measuring position of instruments, then click the "Start" button below to black correction for instrument.
Figure 13
Measuring port to standard blackboard, click “Start” to black correction for instrument.
3. Setup
Figure 14
Light Source:Click on the command, activate the dialog of standard light source, then choose the standard light source needed from the dialog below.
《Color-Analysis System》 Installation and user manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
8
Figure 15
Way to contain light:Click on the command, activate the dialog of SCI/SCE, then choose specular contained or not contained to measure from the dialog below.
Figure 16
Color Space:Click on the command, activate the dialog of color space, then choose color space needed to measure from the dialog below.
Figure 17
《Color-Analysis System》 Installation and user manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
9
Color Formula:Click on the command, activate the dialog of color formula, then choose color formula needed to measure from the dialog below.
Figure 18
Tolerance Settings:Click on the command, activate the dialog of tolerance settings, then set up tolerance to provide criteria for qualified color measurement from the dialog below.
Figure 19
Single、average measurement:Click on the command, activate the dialog below of Single、average measurement. The frequency of average measurement is from 0-99 times.
Figure 20
《Color-Analysis System》 Installation and user manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
10
Print Information Settings:Click on the command, activate the dialog of Print information settings, then set up the information of the object measurable or measured from the dialog below.
Figure 21
4. Measurement
Figure 22
Standard Sample Measurement:Click on the command for Standard sample measurement Testing Sample Measurement:Click on the command for testing sample measurement Input Standard Sample Manually:Click on the command, activate the dialog of Inputting manual standard sample, then set and input Lab, the manual standard sample pops-up in the information bar.
Figure 23
《Color-Analysis System》 Installation and user manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
11
Standard/Testing Sample Color Matching:Click on the command, activate the dialog of Inputting manual standard sample, simulation color of standard/testing sample pops-up in the dialog below, contrast and selection of standard sample.
Figure 24
Whiteness、Yellowness Measurement:click on the command, activate the dialog of Whiteness、yellowness measurement, then measure whiteness、yellowness in measuring button from the dialog below.
Figure 25
《Color-Analysis System》 Installation and user manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
12
5. Data Transmission
Figure 26
Uploading Data into Computer:the steps of uploading data into computer as below:
Step 1:Click on the command, activate the dialog of uploading data into computer;
Figure 27
Step 2:Input the prefix name of uploading data in the standard sample name, then click start to transmit instrument data into computer;
Figure 28
Step 3:Click on the completion, the dialog below pops-up, operate “save as standard database”
《Color-Analysis System》 Installation and user manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
13
save、 transfer out 、deletion among uploading data.
Figure 29
Downloading standard sample into instrument:click on the command, activate the dialog of downloading standard sample into instrument., such as iWAVE_T001 in the picture“iWAVE_T001”,then click the download button, there are hints for downloading completion, and shows standard sample name in the downloading name, such as the name of downloading sample called T047 in the instrument.
Figure 30
《Color-Analysis System》 Installation and user manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
14
Figure 31
6. Standard Database
Figure 32
Standard Database:click on the command, activate the dialog of standard database, then search standard sample through LAB or sample name from the standard database interface. There are 2 functions about standard database, one is for measurement of sample, another is to download sample into instrument sample from standard sample database.
Figure 33
《Color-Analysis System》 Installation and user manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
15
7. Check
Figure 34
Toolbar: hide/show toolbar Statusbar:hide/show toolbar
8. Help
Figure 35
Help:open color analysis system user manual About :the version of color analysis system
《Color-Analysis System》 Installation and user manual
SHENZHEN WAVE OPTOELECTRONICS TECHNOLOGY CO.,LTD. www.wavegd.com
16
III. Other Functions
1. The renaming , Deletion of Standard /Testing Sample
Double click on standard /testing sample needed to rename, input new name in the picture below
Figure 37
Right-click on standard /testing sample, function menu pops-up, standard /testing sample can
be saved into standard database, or deleted. picture below:
Figure 38