Embed Size (px)
Citation preview
Cold Chain Solutions
ShockWatch Cold Chain Solutions
TrekView
Multi-use recorder
Pe
rfo
rma
nc
e
Data Recorders
Chemical Indicators
ColdMark2
WarmMark2
Single use Low cost
Go – No/Go
Price
Increasing Value to Customer
ColdMarkWarmMark
Intelligent Monitoring System
Real-time Monitoring
WarmMark®2 and ColdMark®2
Temperature Indicators
WarmMark2 & ColdMark2
• Single-use, single temperature threshold indicators• Field-armable• Easy-to-read with a definitive color change• Accurate & affordable• Identifies out-of-tolerance temperature conditions
WarmMark2 Features
1. Field-armable with button push
2. Temperature sensitivity
3. Unique identifiers for enhanced shipment tracking
4. Shows “ON” to indicate the device is armed
5. Blue appears at exposure times
6. Part number
Best-in-class ascending time-temperature indicator which alerts users of exposure to unacceptable temperature conditions and the cumulative amount of time of the exposure.
WarmMark2 FeaturesAccuracy• Temperature accuracy of +1°C• No false activations from
human handling
Quality• Certificate of conformance
with every shipment• Heat-sealed to prevent
bleeding• Tamperproof• Release documents available
upon request
Easy to Read and Use• Field-armable• The word ON appears
when device armed
Traceability• Unique identifiers assist
tracking• Product is lot-traceable
Standard WarmMark2 Sensitivities*
Blister on Top (BOT) – Armed from the front of device. Allows smaller increments of time/temp exposure to be shown.
Blister on Bottom (BOB) – Armed from the back of device. Allows for longer run-out times.
*Based on isothermal temperature of 2°C above threshold temperature. Higher temperature exposure will speed run-out
How WarmMark2 Works
Inactive: liquid in blister before arming
Armed: blister squeezed, RED in arming window confirms product is armed
Breach: after exposure to temperatures over the threshold temperature, blue dye will appear in the breach window for the time specified
ColdMark2 Features1. Field-armable with button push
2. Unique identifier for enhanced shipment tracking
3. Indicates the device is armed
4. Turns red when exposed past threshold
5. Temperature sensitivity
6. Part number
ColdMark2 FeaturesAccuracy• Temperature accuracy of +1°C• Accurate response time
Quality• Certificate of conformance with
every shipment• Tamperproof• Release documents available
upon request
Easy to Read and Use• Field armable - requires no
special packaging or overnight shipping
• Window on device shows it has been armed
Traceability• Unique identifiers assist
tracking• Product is lot-traceable
Available ColdMark2 Sensitivities
Temperature Thresholds
Activation Time
0°C / 32°F 60 minutes or less
1.5°C / 35°F 30 minutes or less
How ColdMark2 Works
Inactive: liquid in blister before arming
Armed: blister squeezed, RED in arming window confirms product is armed
Breach: after exposure to temperatures below the threshold temperature, red dye will appear in the breach window
WarmMark and ColdMarkTemperature Indicators
WarmMark & ColdMark• Single-use temperature threshold indicators• Identify out-of-tolerance temperature conditions• Accurate & affordable
WarmMark Short-Run WarmMark Long-Run
WarmMark Duo
ColdMark
WarmMark Overview
1. Field-armable with pull tab
2. Temperature sensitivity
3. Black stripes show product armed
4. Breach windows turn red when exposure above the activation temperature occurs
Ascending time-temperature indicator alerts users of exposure to unacceptably high temperature conditions and the cumulative amount of time of the exposure.
1
2
3
4
WarmMark Short-Run
WarmMark Long-Run WarmMark Duo2
2 23 3
WarmMark Short-Run
Note: Run-out times are based on a 2oC excursion above the response temperature. Readings are affected by severity of temperature excursion. Higher temperatures will cause run-out to occur faster than stated.
WarmMarkTM SRResponse Temp
Run Out Time
Window 1 Window 2 Window 3
-18oC / 0oF 2 hours 3 hours 12 hours
0oC / 32oF 2 hours 12 hours 48 hours
5oC / 41oF 30 minutes 2 hours 8 hours
8oC / 46oF 2 hours 12 hours 48 hours
10oC / 50oF 2 hours 12 hours 48 hours
20oC / 68oF 2 hours 12 hours 48 hours
25oC / 77oF 30 minutes 2 hours 8 hours
30oC /86oF 30 minutes 2 hours 8 hours
37oC / 99oF 30 minutes 2 hours 8 hours
Ascending time-temperature indicator which alerts users of exposure to unacceptable temperature conditions and the cumulative amount of time of the
exposure up to 8, 12, or 48 hours depending on the temperature sensitivity.
WarmMarkTM LRResponse Temp
Run Out Time
10oC / 50oF 31oC / 88oF
Line 1 12 hours 12 hours
Line 2 30 hours 30 hours
Line 3 60 hours(2.5 days)
60 hours(2.5 days)
Line 4 110 hours 110 hours
Line 5 168 hours(7 days)
168 hours(7 Days)
WarmMark Long-Run
Note: Run-out times are based on a 2oC excursion above the response temperature. Readings are affected by severity of temperature excursion. Higher temperatures will cause run-out to occur faster than stated.
Ascending time-temperature indicator which alerts users of exposure to unacceptable temperature conditions and the cumulative amount of time of the
exposure up to 7 days.
WarmMark Duo
Note: Run-out times are based on a 2oC excursion above the response temperature. Readings are affected by severity of temperature excursion. Higher temperatures will cause run-out to occur faster than stated.
WarmMarkTM DuoResponse Temp
Run Out Time
10oC / 50oF 34oC / 93oF
Window 1 3 days -----
Window 2 8 days -----
Window 3 14 days -----
Window 4 ----- Within 30 minutes
Indicates the duration of temperature exposure at two different activation temperature levels. Monitor for longer excursions above 10°C and for brief excursions above 34°C
ColdMark Overview• Descending, single-use temperature indicator that provides
accurate, irreversible evidence of a below-temperature deviation• Turns from clear to violet when the temperature goes below a
predetermined threshold
Activated
ColdMark Sensitivities
ColdMark is available for the following activation temperatures:
• -3°C/26°F• 0°C/32°F• 2°C/36°F• 5°C/41°F
• 10°C/50°F
TrekView ®
Temperature Recorders
TrekView Temperature Recorder• Download data in a few seconds• Connectivity: RF plus USB• Activate tags, check
temperatures without opening the package
• Visual indication of high / low temperature excursions for quick go / no-go decisions
• Footprint: size of a matchbook (minimizes package design considerations)
• Reusable for up to 26 on/off cycles
• Optional integrated probes for application-specific monitoring
• Optional handheld or desktop reader
* RF signals cannot read through metal packaging** For handheld reader
Unique Tag ID Number
Low Excursion Display Window
High ExcursionDisplay Window
Active Display Window
StatusButton
On/Off Button
TrekView USB
• External or internal USB options• Provides access to temperature
data without readers• Fast data downloads using
universal USB port on any PC
TrekView Probe Units• Stainless steel probe
• Monitors core temperatures• Ideal for food products
• Ribbon probe • Used in validated
pharmaceutical packaging• Ideal for containers
with metal components orlarge containers
TrekView DMS Overview• Web-based application that assists in monitoring your cold chain• 24/7 access to data from any internet-enabled device • No software to install and little or no IT involvement required• Analyze supply chain performance, create reports, and identify
problem areas • Simple menu structure for easy setup and configuration of recorders
TrekView DMS Overview• Configure the TrekView
temperature recorder settings in the easy-to-use TrekView Interface Application, and it is ready for use
• When shipment has reached the end of its journey, the TrekView recorder can be scanned in a matter of seconds and uploaded
• Detailed reports can be generated, but access to the information can be limited, ensuring that the information is seen by only those who need it
Security & Compliance
• FDA 21 CFR part 11 compliant, fully validated• Data housed at a Tier 3 data center • Password-protected• User access levels limited by assigned roles
TrekView Desktop Software
• Intuitive interface for simplified tag configuration• At-a-glance graphs and charts• Detailed, customizable reports• Quick identification of out of tolerance conditions
TrekView Readers
Handheld Desktop
• Download data in seconds
• No optical lens to clean or pins to align on readers
Target Where to Scan
Mount the TrekView target label to match the location of the data recorders
TrekView
TrekView
Scan here
Remote MonitoringFacilities and In Transport
Remote Monitoring• Wireless temperature and humidity sensors for real-
time monitoring in storage and in-transit • Environmental data is collected from each sensor• Data is transmitted to a centralized data repository• Multiple frequencies available – WiFi, 900 MHz, 418
MHz
Portal – Reports
Portal – Graph
Portal – Transport
ShockWatch Cold Chain Services
Cold Chain Services
Temperature Mapping
Gap Analysis
ValidationServices
Package Design
Shipping Studies
Product Calibration
ColdChain
Services
