Coin Validators Gaming Catalogue · 2011. 7. 7. · 65 Coin Validators Gaming Catalogue • To change the coin you wish to accept, simply lift up the retaining bracket and insert

W W W . S U Z O . C O M 65

Gaming CatalogueCoin Validators

• To change the coin you wish to accept, simply lift up the retaining bracket and insert new sample coin and the mech. will accept only that coin. • Accepts coins based on the coins diameter size, thickness and material content. • Capable of accepting a wide variety of coins and tokens: Coin Dia. Size: 18 mm to 31 mm. Coin Thickness: 1.2 mm to 3.0 mm. • 3-way adjustable timing switch for coin output 22 ms/ 45 ms/65 ms. • Adjustable sensitivity to eliminate acceptance of high quality slugs. • Easy installation. • Requires +12Vdc. • Mounting bolts included.

Electronic Roll Down Validator with Reject Lever

Part no. DescriptionH40-1500-03 Electronic roll down validator with reject lever

Inscription LabelFor reject button.

0.10

PUSH TOREJECT

E

0.20

PUSH TOREJECT

E

0.50

PUSH TOREJECT

E

1.00

PUSH TOREJECT

E

2.00

PUSH TOREJECT

E

Part no. DescriptionC11-13E0.10 Label E0.10C11-13E0.20 Label E0.20C11-13E0.50 Label E0.50C11-13E1 Label E1.00C11-13E2 Label E2.00

Part no. Description23-0091-010 Price labels E0.1023-0091-020 Price labels E0.2023-0091-050 Price labels E0.5023-0091-100 Price labels E1.0023-0091-200 Price labels E2.00

Frontplate Coin Validator• Available for Euro coins E0.10, E0.20, E0.50, E1.00 and E2.00.• Frontplate size 60 x 152mm.

Part no. Description107-0021 Frontplate coin validator E0.10107-0022 Frontplate coin validator E0.20107-0023 Frontplate coin validator E0.50107-0024 Frontplate coin validator E1.00107-0025 Frontplate coin validator E2.00

Part no. Description107-0001 Coin validator E0.10107-0002 Coin validator E0.20107-0003 Coin validator E0.50107-0004 Coin validator E1.00107-0005 Coin validator E2.00

• Compatible with International Standard.• Metal content check.• Washer catcher.• Thickness, diameter, weight and rim test.• Anti strimmer protection (no fishing)• Size: 102mm x 89mm.

Single Coin Validator

Part no. Description107-0030 Bac k channel assembly

Electronic Coin EqualizerSimple upgrade from the older generation of mechanical coin mechanisms without their inherent problems of coin jams and wearing parts. Available at a price that makes conversion economically attractive.• Solid state electronic circuit designed to compare the “characteristic” of incoming coin to sample coin.• “Slide action” sensor coil assembly allows for quick sample coin change.• High reliability.• Will retrofit most mechanical 3.1/2” acceptors.• Standard voltage of 12 - 24 - 50Vac or Vdc.• Electronic circuit determines coins material composition, thickness and diameter.• Potentiometer adjustable for “weeding-out” slugs. Rejects coin automatically when power is off.• “Free-fall” acceptance for accurate quick-feeding.• Credit output signal, which eliminates the need for a microswitch assembly.• Built in lock-out coil, which eliminates the coin-in no credit potential.• Not suitable for 1 and 2 Euro .

Part no. DescriptionCE100 Coin equalizer

Rejector Mounting StudsPart no. DescriptionC10-21 7mm long

Features:• Compatible with International Standards.• Metal content check.• Washer catcher.• Thickness, diameter, weight and rim test.• Anti strimmer protection (no fishing).• Each mech fully tested and inspected.• Size: 102 X 89mm.

This mechanical single coin mechanism is available for all coin/tokens from 18 up to 30mm diameter.

Single Coin Validator

Part no. Description61-10XX* Validator

E

0.10E

0.2E

0.50E

1.00E

2.00Size:

40 x 40mm

10 pcs per sheet

Back Channel Assembly• Universal metal back channel assembly.• Will fit all 3-1/2” coin mechanisms.

Gaming Catalogue

S U Z O I N T E R N A T I O N A L66

Power SuppliesSingle Output Switching Power Supplies• Low cost, high reliability. • High efficiency, low working temperature. • Built in EMI filter, low ripple noise. • Compact size, light weight. • 100% full load burn-in test. • ISO-9001 manufacturer. • Short circuit/ over load/ over voltage protected. • International AC input selected. • Approvals: UL / TUV / CE. • 1 year warranty.

Input voltage.............................88~132Vac/ 176~264Vac selected by sw. Input frequency.........................47-63hz. Inrush current............................cold start, 20A/ 115V, 40A/ 230V. Output voltage...........................refer to below table (± 10% ADJ.) Overload protection...................105%~150% output pulsing mode. Over voltage protection.............115%~135% of output voltage. Setup, rise, hold up time............1s, 30ms, 15ms/ 230Vac. Withstand voltage......................I/P-0/P:3KV, I/P-FG:1.5KV, 1min. Working temperature.................0-50ºC @100%, -10ºC @80%, 60ºC @60% (5V&7.5V 0-45ºC @100%, 60ºC @50%) Safety standard..........................UL 1012, TUV EN60950. EMC standard.............................EN55022 class B, IEC801-2,3,4,5, EN60555-2,3. Connection.................................7P/9.5mm pitch terminal block. Weight.......................................0.65kgs. Size: ..........................................199 x 98 x 38mm.

Input voltage...........................88~132Vac/ 176~264Vac selected by sw. Input frequency.......................47-63hz. Inrush current..........................cold start, 20A/ 115V, 40A/ 230V. Output voltage.........................refer to below table (± 10% ADJ.) Overload protection.................105%~150% output pulsing mode. Over voltage protection...........115%~135% of output voltage. Setup, rise, hold up time..........1s, 30ms, 15ms/ 230Vac. Withstand voltage....................I/P-0/P:3KV, I/P-FG:1.5KV, 1min. Working temperature...............0-50ºC @100%, -10ºC @80%, 60ºC @60% (5V&7.5V 0-45ºC @100%, 60ºC @50%) Safety standard........................UL 1012, TUV EN60950. EMC standard...........................EN55022 class B, IEC801-2,3,4,5, EN60555-2,3. Connection...............................7P/9.5mm pitch terminal block. Weight.....................................0.65kgs. Size: ........................................199 x 98 x 38mm.100W, 12V Power Supply

100W, 24V Power Supply

Part no. Description42PPO412 12V 8.5 Amp output

Part no. Description42PPO424 24V 4.5 Amp output

Output. Tol. R&N Eff.12V, 8.5A ±1% 125mV 80%


• Low cost, high reliability. • High efficiency, low working temperature. • Built in EMI filter, low ripple noise. • Compact size, light weight. • 100% full load burn-in test. • ISO-9001 manufacturer. • Short circuit/ over load/ over voltage protected. • International AC input selected. • Approvals: UL / TUV / CE. • 1 year warranty.

• Low cost, high reliability. • High efficiency, low working temperature. • Built in EMI filter, low ripple noise. • Compact size, light weight. • 100% full load burn-in test. • ISO-9001 manufacturer. • Short circuit/ over load/ over voltage protected. • International AC input selected. • Approvals: UL / TUV / CE. • 1 year warranty.

Input voltage...........................88~132Vac/ 176~264Vac selected by sw. Input frequency.......................47-63hz. Inrush current..........................cold start, 35A. Output voltage.........................refer to below table (± 10% ADJ.) Overload protection.................105%~150% output pulsing mode. Over voltage protection...........30-34.8V. Setup, rise, hold up time..........100ms, 50ms at full load. Withstand voltage....................I/P-0/P:3KV, I/P-FG:1.5KV, 1min. Working temperature...............10~+60ºC. Safety standard........................UL 1012, TUV EN60950-1, UL 60950-1. EMC standard...........................EN55022 class B. Connection...............................7P/9.5mm pitch terminal block. Size:........................................ 199 x 110 x 50mm.

150W, 24V Power SupplyPart no. Description42PPO150-24 24V 6.5 Amp output


• 320W single output with PFC function. • Universal AC input / Full range. • Output 5V 55A. • Built-in active PFC function, PF>0.95. • Protections: Short circuit/Overload/Over voltage/over temperature. • Forced air cooling by built-in DC fan. • Built-in fan speed control. • Fixed switching frequency at 100KHz.

Part no. DescriptionH80-1301-00 Power supply for Mikohn signs

Power Supply for Mikohn Signs

W W W . S U Z O . C O M 67

Gaming CataloguePower Supplies

• Universal AC input / Full range. • PF>0.92@230Vac and full load. • Protection: Short circuit / Over load / Over voltage. • Cooling by free air convection. • Fixed switching frequency at 134KHz. • Approvals: UL / CUL / TUV / CB / CE. • 100% full load burn-in test. • 1 year warranty.

• Universal AC input / Full range. • LED Indicator for power on. • Protection: Short circuit / Over load / Over voltage. • Cooling by free air convection. • All using 105º long life capacitors. • Approvals: CUL / TUV / CB / CE. • 100% full load burn-in test. • 1 year warranty.

AC input voltage range.............................................................. 88~264Vac; 124~370Vdc. AC inrush current................................................ Cold start, 20A at 115Vac, 40A at 230Vac. DC adjustment range............................................................................12V, 24V, 48: ±10% 13.8V: 12~14.5V; 27.6V: 24~29V; 54.0: 48~58V. Over load protection..............................................CH1.2: 105~135%, charger: 0.51~0.9A; constant current limiting, auto-recovery. Over voltage protection............................................CH1: 115~135% rated output voltage. Setup, rise, hold up time...............................1000ms, 90ms, 20ms at full load and 230Vac. Withstand voltage............................................... I/P-O/P:3KVac, I/P-FG:1.5KVac, 1minute. Working temperature..................................Without fan:-10~50ºC@70%, 60ºC@50% load. Safety standards............................................................... UL 1950, TUV EN60950 approved. EMC standards...................................................................EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, ENV50204. Connection......................................................................... 8P/ 9.5mm pitch terminal block.

AC input voltage range.............................................................. 88~264Vac; 124~370Vdc. AC inrush current............................................................................ Cold start, 33A/230Vac. DC adjustment range...................................................................................CH1: 4.75-5.5V. Over load protection............................................................110-150% rated output power. Over voltage protection...........................................................................CH1: 5.75V-6.75V. Setup, rise, hold up time...................................................................500ms, 20ms/230Vac. Withstand voltage...........................................................300Vac surge input for 5 seconds. Working temperature.........................................................................................-25~+70º. Safety standards.......................................................UL 60950-1 TUV EN60950-1 approved. EMC standards...................................................................EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, ENV50204. Connection......................................................................... 8P/ 9.5mm pitch terminal block.

Dual Output Switching Power Supplies

Dual Output Switching Power Supply

Part no. Output Tol. R&N Eff. Max.42PP0520 12V, 0.0~12.5A ±2% 150mV 77% 153W

5V, 0.0~3.00A ±3% 100mV

Part no. Output Tol. R&N Eff. Max.42PP0530 24V, 0.0~6.50A ±1% 150mV 82% 154W

5V, 0.0~3.00A ±3% 100mV

Part no. Output Tol. R&N Eff. Max.42PP0540 5V, 6A ±2% 80mV 79% 54W

12V 2A ±7% 120mV

42PP0530

42PP0520

42PP0540



Replacement Power Supply Boardfor Bally Slots• For Bally Pro Series slots V7000 & V7200 & 5000. • Just replace the board and save $$. • 63.5 watts, 5.5 amps. • UL, CE, CSA Approved.

Part no. DescriptionH80-1178-00 Power supply board

PRIMA POWER

• Industry standard. • AC input 88-132Vac or 176-264Vac (switchable). • +5V, 3~15 Amp, +12V 4 Amp, -5V 1 Amp. • CE, TUV and UL approved. • High efficiency. • Easy start up. • Green “power on” LED. • Overload protected. • Built in EMI filter. • Maximum noise minimization by built in high speed diode. • Weight 0.8kg / 20 pieces in a box.

Triple Output Switching Power Supply

• Universal AC input / Full range. • Protection : Short circuit / Over load / Over voltage. • Cooling by free air convection. • Led indicator for power on. • Fixed switching frequency at 50KHz. • Output : 5V - 5A / 12V -2.5A / -12V 0.5. • Maximum output 60W.

PRIMA POWER

• Industry standard. • AC input 88-132Vac or 176-264Vac (switchable). • +5V, 3~15 Amp, +12V 4 Amp, +24V 4 Amp. • CE and TUV approved. • High efficiency. • Easy start up. • Green “power on” LED. • Overload protected. • Built in EMI filter. • Maximum noise minimization by built in high speed diode. • Weight 0.8kg / 20 pieces in a box.

191.0 40.0

191.0

40.0

AC imput 110 / 240Vac

AC imput 110 / 240Vac

Height: 50mm (2”)Width: 110mm (4.33”)Depth: 193mm (7.60”)

Part no. Description42PP0606 Power supply 104W182-0014 Cover

Part no. Description42PP0608 Power supply 104W182-0014 Cover

Part no. Description42PP0420 Power supply

Height: 50mm (2”)Width: 110mm (4.33”)Depth: 193mm (7.60”)

Open Frame Power Supply for WMS Bluebird• 300W output max for use in WMS Bluebird machines.

Part no. DescriptionH80-0459-10 300W Power supply for WMS bluebird

Replacement Power Supply Boardfor WMS 360 and 550 Machines• Open frame international power supply for WMS 360 and WMS 550 machines. • +5V@10A, +12V@5A, -12V@1A. • IL, CSA AND TUV, built-in EMI filter.

Part no. DescriptionH80-0341-10 International Power supply for WMS 360 and 550

AC input voltage range: 85-264Vac.AC inrush current: Cold start 20A/115Vac - 40A/230Vac.AC current ( typ ): /115Vac - 1A/230Vac.DC adjustment range: 5V : 4.75 - 5.5V.Working temperature: -10 - 60º.Dimensions: 159x97x38mm.Safety standards: UL1012 / UL60950 / TUV EN60950 approved

W W W . S U Z O . C O M 69


• +5v 20A, +12v 8A, -5v .5A, -12 .5A. • UL, CSA and CE Recognized. • 200 Watt power supply. • Great power supply for video games & video poker applications. • New Innovative Dual On/Off and Remote switch capable design. • One switch on back and other on front of power supply to allow easy access to turn power On/Off. • Additional 8 Circuit Molex plug with +5Vdc and +12Vdc outputs for additional accessories. • Dual AC input 115Vac/230Vac, selectable by switch. • AC plug for hook-up of Bill Validator, 110Vac 1.0A. • Metal case - AT size. • Physical Size: 89 H x 149 W x 140 D. • Excluding power cable.

Dual Switch & Remote Capable 200Watt Power Supply

Ultimate Power Supply withon/off Switch - 150 Watt

Part no. DescriptionH80-0002-10 200 Watt dual switch & remote capable power supply

• +5v 15A, +12v 5.5A, -5v 1A. • UL recognized, CSA. • Over voltage protection on +5v, a Happ exclusive. • Designed specifically for the coin-op industry. • Smoother start-up. • Better heat dissipation: three separate heat sinks. • Low ripple and noise, EMI filter. • Dual AC input 115Vac/ 230Vac, selectable by switch. • Complete overload and short circuit protection. • Built in DC fan and power switch. • Metal case - XT size. • Requires minimum 1.5 amp load on +5 for proper operation. • Excluding power cable.

Part no. Description

H80-0015-00 Power pro ultimate power supply withOn/Off switch - 150 watt

128.4

Tapped 6-32 (4)

224

194

101

119102

Dimensions in mm

211

1505.1

86

LED

64

140 6.6

Dimensions in mm

HARNESSLENGTH 300mm

140

93

68

4

24

29

The SPS 077W range features seamless operation across 115V and 230V mains voltages. It is a true wide-range PSU with the latest in PFC technology. In addition the range incorporates Sanken’s state-of-the-art resonance technology for higher power efficiency. The SPS 077W range features increased output current on 12V for AWP machines with a larger reel-module count. The peak current on the 24V output has been incrased consi-derably to accomodate new 24V machine components. The SPS 077W incorporates a missing-cycles output and also a 5V status signal output which can be monitored to give valuable feed-forward information to the AWP’s control unit.

• Operating temperature range 0ºC to 50ºC. • AC output: mains feet-thru facility. • Cooling: Convection at lower output powers. Internal temperature controlled fan at higher output powers. • Size: 260 x 170 x 90mm. • For technical datasheets specifications and drawings please contact our sales-department.

SPS 077W Wide Range - Resonance Technology

Part no. Description42M277 Power supply

5V 3Amp 3Amp 13V 6.5Amp 10Amp 24V 0.25Amp 7Amp *48V 3.2Amp 6.4Amp -12V 150mA 150mA

Alternative output versions available: *36V 4.8Amp 9.6Amp *44V 3.2Amp 6.4AmpAdditional outputs:Missing-mains-cycle signal output.5V status signal output.

DC Output Nominal PeakVoltage Load Load

• For use in WMS Bluebird slot machines.• UL recognized, TUV and CE approved. AC Input: 115V ~ 10A; 230V ~ 5A Frequency: 50 - 60Hz. DC Output:. +5V / 15A (red). +12V / 13A (yellow). +3.3V / 8A (orange). +15V / 6A (blue). +5Vsb / 1A (white). Output Max: 300W.

Power Supply for WMS Bluebird

Part no. DescriptionH80-0459-20 Power pro power supply for WMS Bluebird


Gaming Catalogue

These powersupplies are often used for LCD monitors and are ideal for low cost 12Vdc power solutions.• Enclosed desktop model. • AC input range 90-264Vac. • Input frequency 47-63Hz. • Input current 1.5A max at 90Vac input & DC output at full load. • Efficiency min. 75%. • Ripple & noise 150mVpp. • Short circuit and overvoltage protection with auto- recovery function. • 100% burn in test. • Led indicator. • Operation temperature 0 - 40º • EMC compliance to 61000-4-2/3/4/5/6/11. • FCC part 15 class B, VCCI class B and CISPR part 22 class B. • MTBF 60.000 power on hours at 25 C. • Standard IEC320 AC inlet . • DC cord 150cm. • DC plug 5.5mm outside (-) diameter, 2.5mm inside (+) diameter. • Dimensions 3A : 115x51x32mm 15A : 110x64x31.5mm . • Available in 3 and 5A max output.

Part no. Description150-0031 Power supply 3A 12Vdc150-0032 Power supply 5A 12Vdc

• Enclosed desktop model. • AC input range 90-264Vac. • Input frequency 47-63Hz. • Input current 0.8A / 100Vac. • Efficiency min. 65% - 3.3V / 70% - 5V. • Ripple & noise 30mVppp. • Short circuit and overvoltage protection with auto- recovery function. • 100% burn in test. • Led indicator. • Operation temperature 0 - 65º • Safety approvals : UL2601-1, IEC601-1 EN60601-1. • MTBF 400.000 power on hours at 25º. • Standard IEC320 AC inlet . • DC cord 120cm. • DC plug 5.5mm outside (-) diameter, 2.1mm inside (+) diameter. • Dimensions: 108x67x36mm. • Available in 3.3V-5A and 5V-5A single output.

• Used in Suzo-Happ toppers. • Output 12Vdc - 5A. • Input 100-240Vac. • 100% burn in test. • MTBF 60.000 hours at 25º. • Operation temperature 0-40º. • CE - CUL - TUV - CSA approved. • DC cord 150cm length with 2 pin JWT connector ( molex compatible ). • Size 110x64x32mm.

Part no. Description42-0010 Power supply 3.3V 5A42-0011 Power supply 5V 5A

3.3V and 5Vdc Desktop Power Supplies

12Vdc Desktop Power Supplies

12Vdc Desktop Power Supply with 2 pin Connector

AC-DC Adaptor

Part no. Description108-0120 AC-DC adaptor

• Input: 220-240Vac 50Hz. • Output voltages selectable 1.5 - 3.0 - 4.5 - 6.0 and 9.0 Volt. • Output Load Permanent 200mA, max. 300mA. • Supplied with selection of different jack plugs and coaxial plugs. (6 pcs)

Part no. Description42LS001 Power supply 12V 5A

Power Supply for Futurelogic GEN2 Printers

Part no. Description46-0324 Power supply for Futurelogic printer46-0328 Power cord

External Power Supplies for Elo Monitors


E360741 Power supply for 15” Elo monitors Elo monitor ref. 1537L

E785134 Power supply for 17” and 19” Elo monitors Elo monitor ref. 1739L and 1939L

E162361 Power supply for 19” wide Elo monitor Elo monitor ref. 1938L

150-0031

150-0032

24Vdc Power Supply

Part no. Description150-0039 Power supply 24Vdc

• 24Vdc 5A output. • 110/240Vac input. • Enclosed desktop model. • Excluding powercord. • Used in 22 and 32” LCD monitors.Looking for power supplies not listed?

Please contact our sales department!

Power Supplies


Gaming CatalogueCountersThe SEC has up to 31 counters available (indexed as counter 0 to counter 30, (0 to 1E Hex) stored in a non-volatile EEprom device. Each counter can store values from 0 to 9,999,999, which can be displayed on a 7 digit, 7-segment LCD display. Each counter also has 7 text characters associated with it that can be displayed when the counters are cycled, enabling individual counter readings to be easily located and logged bythe operator.The text can be changed by the host machine, enabling the counter unit to be configured for different languages or different counter uses as it is moved from the host machine to another.

The counters are managed under host control via a clocked serial link.The host can use as many of the 31 counter as is required, the counter cannot be cleared to zero or decremented under normal circumstances. The lifetime of the unit is specified as a minimum of 9,999,999 single increments on any counter.

During normal operation, the SEC will display the contents of the counter 0 (default) on the LCD display. The host can also control the LCD display directly, enabling text and counters to be shown in any user-defined order, or to show text messages from the host machine.

Hardware Specification:Maximum Supply Voltage 36vMinimum Supply Voltage 8.5vQuiescent Current 21mA

Reset, Data In & Clock Inputs:Maximum Low Level Input 3vMaximum High Level Input 20vInputs are pulled high internally 5vInputs can be driven directly via open collector drivers

Data Output:Maximum Output Current 100mAMaximum Output Voltage 60v

Read/Write Clock Speed:Maximum 5KHzMinimum 100Hz

Communications:Communications security is by the use of checksums for each command packet sent to the SEC. The checksum is an 8-bit sum of the other words that make up the command packet (i.e. CMD, ID, CNT and any data bytes), ignoring any carry bits. Should the SEC receive a command that has an incorrect checksum, it will ignore the command and send a NAK message back to the host machine.

Fingerprinting:Each SEC unit will be assigned a unique ‘fingerprint’ as a security code that allows each SEC to be identified. The SEC fingerprint is a 32bit binary number, allowing an unlimited number of individual fingerprints.The fingerprint can be read at any time by the host machine to determine if a SEC has been changed in the machine, allowing for frauds to be detected. Currently, the fingerprint is assigned during production test using a combination of software and special hardware. When the fingerprint is set, it cannot be modified or resetted. The unique SEC fingerprint is recorded at manufacture and used for quality control,parts tracking as well as security.

SEC Starpoint Electronic CounterEnhanced security is a major feature of the SEC, an unique finger print code allows the machine to detect any meter changes and to prevent operation if the meter is not present. By utilising the latest electronic technology, the SEC avoids the reliability problems and service call-outs which can be experienced with mechanical counting devices.

• Replaces up to 31 mechanical meters with individual counters stored in EEPROM.

• 7 Digit Liquid Chrystal Display for displaying contents of counters.

• Text messages and counter selection controlled by host machine.

• Clock Serial interface designed to work on existing meter ports.

• Improved security through: -Secure software protocol.

-Tamperproof counters with unique fingerprint code.

Part no. Description27-0801 SEC Counter

W W W . S U Z O . C O M 73

Gaming CatalogueCounters

Base Mount 7 Digits Counter

Base Mount 6 Digits Counter

Non-Reset 7 Digits Base Mount Counter

Non-Reset 6 Digits Panel Mount Counter

Non-Reset 7 Digits Panel Mount Counter

• Has 7 digits (size 4mm), counting up to 999.9999. • Black plastic housing, flying leads.

• Has 6 digits (size 3.5mm) counting up to 999.999. • Black plastic housing, flying leads.

• Has 7 digits, counting up to 999.9999.• Black plastic housing. • Numbers 3.5mm high, white numerals on black field. • Flying leads connection. • Only available in 12Vdc. Techical details:Pulse timing: 15 Imp/sec. Cycle: 50% Imp. pause. Power consumption: Vdc 0.8W. Depth: 43mm. Weight: 30 gram.

• Has 6 digits, counting up to 999.999. • Black plastic housing. • Numbers 3.5mm high, white numerals on black field.

Pulse timing: 15 Imp/sec. Cycle: 50% Imp. pause. Available in: 6 - 12Vdc. Power consumption: Vdc 0.8W. Hole size: 30.5 X 23mm. Weight: 30 gram.

• Has 7 digits, counting up to 999.9999. • Black plastic housing. • Numbers 3.5mm high, white numerals on black field. • Flying leads connection. • Only available in 12Vdc.

Pulse timing: 15 Imp/sec. Cycle: 50% Imp. pause. Power consumption: Vdc 0.8W. Hole size: 30.5 X 23mm. Weight: 30 gram.

Made according to our specifications

Techical details:Pulse timing: Vac 10 Imp/sec. Cycle: 50% Imp. pause. Available in: 24 - 48 - 220Vac. Power consumption: Vac 12.5/25mA. Depth: 51mm. Weight: 60 gram.

Techical details:Pulse timing: 15 Imp/sec. Cycle: 50% Imp. pause. Available in: 6 - 12Vdc. Power consumption: Vdc 0.8W. Depth: 43mm. Weight: 30 gram.

Part no. Description27-0016 Base mount Counter 6Vdc27-0015 Base mount Counter 12Vdc

Part no. Description27-0001 Base mount Counter 220Vac27-0003 Base mount Counter 48Vac27-0004 Base mount Counter 24Vac27-0005 Base mount Counter 12Vac

Part no. Description27-0115 Base mount Counter 12Vdc, 7 digits

Part no. Description27-0145 Panel mount Counter 12Vdc, 7 digits

Part no. Description27-0045 Panel mount Counter 12Vdc27-0046 Panel mount Counter 6Vdc

18

30

24

30

18

30

24

30

30.5

23.0

30.5

23.0

53

3123

45

1523 15

53

31

45



Base Mount Reset Counter

Panel Mount Reset Counter

KEP PC Board Mount 7-Digit Counter

Part no. Description27-0063 Base mount Counter 48Vac27-0064 Base mount Counter 24Vdc27-0065 Base mount Counter 12Vdc27-0066 Base mount Counter 6Vdc

Part no. Description27-0073 Panel mount Counter 48Vac27-0074 Panel mount Counter 24Vdc27-0075 Panel mount Counter 12Vdc27-0076 Panel mount Counter 6Vdc

Part no. DescriptionH42-0759-07 6Vdc 7-digit Counter with bracketH42-0754-07 12Vdc 7-digit Counter with bracket

• Has 5 digits (size 4mm), counting up to 999.99 and reset with button. • White plastic transparent housing, flying leads.

Pulse timing: Vdc 15 Imp/sec - Vac 10 Imp/sec. Cycle: 50% Imp. pause. Available in: 6 - 12 - 24Vdc - 48Vac. Power consumption: Vdc 140/180mA. Vac 12.5/25mA. Depth: 60.3mm. Weight: 70 gram.

• Has 5 digits (size 4mm), counting up to 999.99 and reset with button. • White plastic transparent housing, flying leads.

Pulse timing: Vdc 15 Imp/sec - Vac 10 Imp/sec. Cycle: 50% Imp. pause. Available in: 6 -12 - 24Vdc - 48Vac. Power consumption: Vdc 140/180mA. Vac 12.5/25mA. Depth: 58.5mm . Panel cut-out: 44 X 25.5mm. Weight: 70 gram.

• Ideal for gaming applications. • 7-digit non-resettable counter. • High speed: 25 counts per second. • PC Board Mount. • Small size. • 0.5mm - .022” pins. • Available in various voltages.

• 7 digit non-resettable. • Low cost, small size. • Internal diode. • Flying leads 22 AWG, length 25cm. • Service life: 1,000,000 cycles. • Magnifying window. • Low power consumption: 1.3 watt. • High speed: 25 counts per second. • High quality – each meter tested at max speed for 5,000 counts before shipment. • Without mounting bracket.

• 7 digit non-resettable. • Low cost, small size. • Internal diode. • Flying leads 22 AWG, length 25cm. • Service life: 1,000,000 cycles. • Magnifying window. • Low power consumption: 1.3 watt. • High speed: 25 counts per second. • High quality – each meter tested at max speed for 5,000 counts before shipment. • Without mounting bracket.

Part no. DescriptionH42-0754-12V 12Vdc 7-digit PC Board Mount CounterH42-0754-24V 24Vdc 7-digit PC Board Mount Counter

Ø2.5mm x 8mm DEEP2 - PLCS

.44"

22mm

28mm

25mm

R.16"

4mm

20mm

3mm 5mm

Ø3mm

M3xP0.5"

11mm

Part no. DescriptionH42-0756-07 6Vdc 7-digit Counter (also rated 5Vdc)H42-0750-07 12Vdc 7-digit CounterH42-1178-07 24Vdc 7-digit Counter

Happ 7-Digit CounterSuzo-Happ 7-Digit Counter with Bracket

51.5sizes are metric in mm

43.5

59.5

25

47.5

46.5

sizes are metric in mm ø 3.6 / ø 7 mm

30

1.18" (30.0)

.893"(22.7)

.19" (5.0)

.394" (10)

1.63" (41.5)

M34MM DEPTH

.47" (11.93)

.37" (9.40)

.022" PINS

.28" (7.1)

.80"

Ø.102" x .35" DEEP2 - PLCS

.44"

.85"1.11"

1.00"

.17"

R.16"

1.90"

1.55".17"

.14" ø 2 HOLES

W W W . S U Z O . C O M 75


Audio Amplifier Ideal to amplify audio sound for use within any environment • 2 Channel Amplifier.• Approx. 8 Watts RMS per channel 10% THD (10 Watts RMS @ 16v Input).• Volume control can be easily adjusted with fingers.• Compact Size: 108mm L x 85mm W x 57mm H.• Power Input: +12Vdc to +18Vdc minimum 1.5A with either a 2mm Coaxial power jack or .100” center locking header connector (Optional Suzo-Happ plug-in power supply available, part number H80-1153-00).• Audio Input: 3.5mm Stereo Jack.• Audio Output: .100” center locking header connector.• Speaker harness with 6.3mm ( 0.250”) female terminals 180cm long is optional available.• Audio input cable 180cm long is optional available.

• 6-digit non-reset meter counts up to 600 coins per minute. • Back of panel mounting style. • Ultrasonically welded tamper-proof end cap. • Pulse length: 50 ms min. • Power consumption: 5 watts. • Voltage: 6Vdc. • Ref. no. 20-9951.

• 6-digit meter counts up to 600 coins per minute. • Back of panel mounting style. • Pulse length: 50 ms min. • Power consumption: 2 watts. • Voltage: 12Vdc.

• 6-digit non-resettable counter. • Counting speed: 20 counts per seconds. • PC board mounting, 24Vdc. • IGT Ref. no. 29209390.

• 12Vdc, 7 digits counter with diode. • Used by various UK AWP manufacturers. • Supplied complete with mounting clip.

6-Digit Counter for WMS Gaming

ENM Counter for Sigma Slot MachinesCounter for IGT Slot Reel Machines

Panel Mount Counter

Part no. DescriptionH42-7427-00 6-Digit Counter for WMS gaming

Part no. DescriptionH42-7428-00 ENM Counter for Sigma slot machines

Part no. DescriptionH42-7431-00 6-Digit Counter for IGT slot machines

Part no. Description27-0035-1-5000 Panel mount counter

• 6-digit non-resettable counter. • Counting speed: 20 counts per seconds. • 13”flying leads. • 24Vac; no diode. • IGT Ref. no. 29203490.

• 7-digit, non reset base mount. • 12Vdc, used in many AWP machines. • Made by Mecom UK.

6-Digit Counter for IGT Reel Machines

Base Mount Counter

Part no. DescriptionH42-7430-00 6-Digit Counter for IGT reel machines

Part no. Description27-0025-5000 Counter 12Vdc

Part no. DescriptionH49-5140-100 AmplifierH80-1153-00 PSU for AmplifierH96-0539-00 Audio input cableH96-0542-00 Speaker harness

TOPVOLUME

CAUTION:MAY BE

HOT

- +HAPP CONTROLS AUDIO AMPLIFIER ASSEMBLY

NOTE: WHEN MOUNTING TO VERTICALSURFACE ARROW MUST POINT UP

4


Gaming CatalogueCabinet Parts

72,588,0

16,0

12.4

M4x

0.7

- 6H

6,5

DEE

P (6

X)

8,4

35,9

Part No. 107-0070-6″With Plunger and Illumination″

Chrome Plated Coin EntriesFeatures:• Available with or without plunger, and with or without led illumination .• Entry adjustable to maximum 34mm.• Maximum coin thickness 3mm ( entry for thicker coins available upon request ).• Made of die-cast material.• Perfect bright chrome polish.• Individually packed for maximum protection against scratches.• Standard text “coins” and blue led illumination in the illuminated version, but can be supplied with any desired text and led colour upon request ( minimum quantities apply ).

Part no. Description107-0035 Coin entry without plunger107-0040 Coin entry with plunger107-0070-6 Coin entry with plunger - Blue illuminated “coins”

Part No. 107-0035″Without Plunger″

Part No. 107-0040″With Plunger″

45,754,0

5,0

28,4

27,0

102.0

18,4

3,0 (Coin opening) 24.0 (Adjustable to 34 max.) 01

45,754,0

5,0

43,2

27,0

102.0

12,3 18,4

102.0

43,2

27,0

45.754,012,3 18,4

17,5

75°

34.9

* All sizes are metric in millimeters

W W W . S U Z O . C O M 77


• Capacity approx. 1250 E1.00 coins. • Made from durable black polyethylene plastic. • Overall size: (LxWxH) 233 x 145 x 205mm.

Plastic Cashbox Large

Part no. Description126-0020 Cashbox

• Made from ABS plastic. • Overall size: (LxWxH) 203 x 165 x 89mm.

Plastic Cashbox


• Universal strike - mounts flat or right angle. • Two different brackets available.

Panel Clamp

22-1016

22-1016-1

22-1016-2

Part no. Description22-1016 Panel clamp22-1016-1 Strike flat22-1016-2 Strike 90 degrees

• Designed for gaming machines. • Used for license on the outside of your game. • Die cast frame: 58 x 100mm. • Window opening: 38 x 80mm.

License Window with frame

Part no. Description22-2210 License window22-2212 License window only

• Made from ABS plastic. • Overall size: (LxWxH) 236 x 80.5 x 209mm.

Plastic Cashbox Slim


• Made from ABS plastic. • Overall size: (LxWxH) 188 x 78 x 59.5mm.

Plastic Cashbox


Developed for use on the back of your cabinet.• Overall size: W 145 x H 60mm.• Grip size:110 x 40mm. • Colour black.

Cabinet Grip

Part no. Description22-0199 Cabinet grip

• Made from ABS plastic. • Overall size: (LxWxH) 290 x 260 x 115mm.

Plastic Cashbox


• Made from polysterene plastic. • Overall size: (LxWxH) 280 x 126 x 116mm.

Plastic Cashbox


• For coin distribution. • AWP machines, etc.

Flexible Tube

Part no. Description22-0194 Flexible tube rol 25 mtr22-0194-100 Flexible tube per mtr

Part no. Ref. no. Diameter Extended Length in mmC ompressed

Length in mm Pressure

H70-0704-00 SL-35 ø20 306 215 70#H70-0705-00 SL-35 ø20 306 215 45#H70-0706-00 SL-36 ø20 437 259 45#

• Enable lids, windows and doors to be opened and kept open without assistance.

Spring Lift Airshocks



• Flexible rubber sleeve. • Used inside the cabinet to cover the wire connection on linefilters. • Ideal for use in combination with filter 22-2224 or 22-2233.

Protective Cover

Part no. Description22-2223 Protective cover

• Entry 6 Amp - 115 / 240Vac linefilter. • Current rating at 115Vac - 6 Amp RMS max. • Current rating at 250Vac - 6 Amp RMS max. • Operating frequency: 50 / 60Hz. • Leakage current: each line to ground a. @115Vac / 60Hz - 0.30mA max. b. @250Vac / 50Hz - 0.60mA max. • Hipot rating (for one minute) a. Line to ground - 2250Vdc. b. Line to line - 1450Vdc. • IR: 100M ohm at 500Vdc any input or output to ground. • Temperature range: -25ºC to +85ºC. • Safety approvals: UL, CUL.

Entry and Line Filter

Part no. Description22-2224 Entry and line filter

• Entry with on-off switch, fuse holder and 6 Amp - 115 / 240Vac linefilter. • Supplied without fuse. • Current rating at 115Vac - 6 Amp RMS max. • Current rating at 250Vac - 6 Amp RMS max. • Operating frequency: 50 / 60Hz. • Leakage current: each line to ground a. @115Vac / 60Hz - 0.30mA max. b. @250Vac / 50Hz - 0.60mA max. • Hipot rating (for one minute) a. Line to ground - 2250Vdc. b. Line to line - 1450Vdc. • IR: 100M ohm at 500Vdc any input or output to ground. • Temperature range: -25ºC to +85ºC. • Safety approvals: UL, CUL.



Entry10 Amp - 250Vac.

Part no. Description22-1030 Entry socket

• Entry with on-off switch, dual fuse holder and 6 Amp - 115 / 240Vac linefilter. • Supplied without fuse. • Current rating at 115Vac - 6 Amp RMS max. • Current rating at 250Vac - 6 Amp RMS max. • Operating frequency: 50 / 60Hz. • Leakage current: each line to ground a. @115Vac / 60Hz - 0.30mA max. b. @250Vac / 50Hz - 0.60mA max. • Hipot rating (for one minute) a. Line to ground - 2250Vdc. b. Line to line - 1450Vdc. • IR: 100M ohm at 500Vdc any input or output to ground. • Temperature range: -25ºC to +85ºC. • Safety approvals: UL, CUL.


Part no. Description22-2227 Entry and line filter dual fuse

• 1 Amp - 115 / 240Vac linefilter. • 6.3 x 0.8mm terminals. • Brand: Schaffner. • Snap-in mounting. • UL-CSA-ENEC approved.



W W W . S U Z O . C O M 79


• Available in 2”, 4” or 5”. • Speaker has a metal shield surrounding the magnet to prevent any interference with the monitors. • See chart for specifications.

Shielded Speakers

Part no. DescriptionH70-0014-00 2” Shielded speaker, 4 WattH49-0228-00 4” Shielded speaker, 12 WattH50-9005-00 5” Shielded speaker, 12 Watt

• Available in 4” or 5”. • Full range. • Choose from 8 or 12 watt. • 8 Ohm. • See chart for specifications.

Unshielded Speakers

Part no. DescriptionH50-9002-00 4” speaker, 12 WattH50-9003-205 5” speaker, 8 WattH50-9004-00 5” speaker, 12 Watt

Specifications for Shielded Speakers

Part no. Diameterin/(mm)Height

in/(mm)Nom

(Watt)Max

(Watt) Ohms Hz Db Range Magnet Net

We ight Frame DiaphragmTerminalSize (in)

H70-0014-00 1.97/ (50) .75/ (mm) .2 .4 8 430 80 4.000 13mm x 10mm 40g Square Paper solderH49-0228-00 3.94 (100) 1.93 (49) 4 12 8 180 71 12.000 6 oz 610g Square Paper .250H50-9005-00 4.69 (119) 2.13 (54) 4 12 8 135 91 8.000 6 oz 610g Pin Cushion Paper .250

Specifications

Part no. Diameterin/(mm)Height

in/(mm)Nom

(Watt)Max

(Watt) Ohms Hz Db Range Magnet Net

We ight Frame DiaphragmTerminalSize (in)

H50-9002-00 3.94 (100) 1.66/ (42.1) 4 12 8 160 90 15.000 6 oz 388g Square Paper .205/.250H50-9003-205 4.73 (120) 1.67/ (42.5) 2 8 8 135 91 15.000 3 oz 265g Pin Cushion Paper .205/.250H50-9004-00 4.73 (120) 1.92/ (48.8) 4 12 8 135 91 8.000 6 oz 440g Pin Cushion Paper .250

• For use in video games.• Size: 102 x 102mm. 8 Ohm - 5W.

Loudspeaker

Part no. Description22-0182-2 Loudspeaker

• For all 4” speakers. • Excluding mounting clips.

Part no. Description22-0183 Grill

• Heav y-duty chrome plated die cast construction.

Coin Return Cup

Part no. DescriptionH42-0259-00 Coin return cup w/o door, chrome

Loudspeaker Grill

• Compact cooling fans. • Wire connection.

DC Cooling Fans


22-2204-412Vdc, Size: 92 x 92 x 25mmSpeed: 2800 RPM, noise: 34dB(A)Air delivery: 49 CFM


22-2204-8 24Vdc, Size: 80 x80 x 25mmSpeed: 3000 RPM, noise: 34 dB(A)Air delivery: 41.7 CFM

22-2204-9 12Vdc, Size: 60 x 60 x 25mmSpeed: 4500 RPM, noise: 33.5dB(A)Air delivery: 23.5 CFM

22-2204-9-2424Vdc, Size: 60 x60 x 25mmSpeed: 4500 RPM, noise: 33.5 dB(A)Air delivery: 23.5 CFM


• Available for single, double or triple layer PCB´s • Sets of 4 pieces, complete with screws.

P.C.B. Feet

Part no. Description22-0064 PCB feet

• Easy moving AWP machines for cleaning and service. • Furnished with black rubber on top and four castors.

Machine Plateau

Part no. Description126-0050 Machine plateau

Finger Guards for Cooling FansPart no. Description22-2208-30 Finger guard 30 x 30mm22-2208-50 Finger guard 50 x 50mm22-2208-60 Finger guard 60 x 60mm22-2208-80 Finger guard 80 x 80mm22-2208-90 Finger guard 90 x 90mm22-2208-120 Finger guard 120 x 120mm

• Protects electronics from over heating.• Easy mounting with 4 bolts.

AC Cooling Fans

®


22-2204 Size: 120 x 120 x 38mm, terminal connectionSpeed: 3000 RPM, noise: 45dB(A)Air delivery: 95/115 CFM

22-2204-2 Size: 92 x 92 x 25mm, terminal connectionSpeed: 2500 RPM, noise: 37dB(A)Air delivery: 29/36 CFM

22-2204-7 Size: 80 x 80 x 38mm, wire connectionSpeed: 2500 RPM, noise: 33dB(A)Air delivery: 23/30 CFM


Gaming CatalogueLoudspeakers

With 30 years of experience in the field of acoustics and loudspeaker technology and a future oriented engagement in research and development, plus the high quality standard of our production, we are nowadays a specialised and world wide successfully operating German loudspeaker manufacturer.

With our solid know-how and our high-tech laboratories, equipped with the latest measurement equipment for acoustical research and development, we are able to solve any problem in the field of electro acoustics in the most competent and reliable way. Apart from the VISATON high-tech labs also VISATON’s anechoic chamber, with its dimensions of 7x7x7 meters one of the largest in the international loudspeaker scene, plays an important role.

The spectrum of applications for VISATON speakers is very wide and ranges from the fields of Home HiFi and Car HiFi to special fields such as space-craft technology, medical electronic equipment and computer systems. Practical examples for applications in the computer industry are Multi-Media-Systems, Home-Cinema speakers and Point of sale-systems.

Also for the development of exclusive high-end systems, top class VISATON loudspeakers are being used more and more often. In order to be always up-to-date with the latest results of research and development, VISATON is actively participating in the continuous exchange of the latest innovative R+D results as a sustaining member of the Audio Engineering Society, New York (AES). Due to a very close contact to leading universities, a permanent technology transfer takes place, enabling us to adapt the latest R+D results for our practical product developments.

VISATON stands for: Quality - Service - and best price/performance ratio.

Stereo amplifier with level controls, e.g. for multimedia applications. Suitable for use with small loudspeakers with impedances of 4 to 8 ohms. Robust metal housing with two fixing lugs. Can be connected directly to the line out or headphones socket of a PC audio card, while the input sensitivity is regulated via the level control. Power supply (12 V) is via a mains adapter (optional) or the computer's on-board power supply. Short-circuit proof. High signal-to-noise ratio.

Technical DataPower supply 12 V dc

Quiescent current 46 mA

Input impedance 10 kOhm

Max. current consumption 1.1 A

Power output (sine, 1% / 5% / 10% THD) 2 x 1.5 / 2.5 / 3.2 W (4 Ohm)2 x 1.7 / 1.9 / 2.1 W (8 Ohm)

Input voltage (full conduction) 700 mV

Output impedance 1.1 Ohm

SNR 81 dB (A) / 78 dB (ext)

Frequency response (−3 dB) 40 Hz–40 kHz

Terminal In-/Output jack 3.5 mm stereo

Terminal DC 5.4 mm outer diam. (−)2.1 mm inner diam. (+)

Net weight 0,178 kg

Temperature range −10 ... 50 °CPart no. Description22-0150 Stereo amplifier

Cruiseship “Aida Vita” completely equipped with Visaton !

Stereo Amplifier

Documents

Coin Validators Gaming Catalogue · 2011. 7. 7. · 65 Coin Validators Gaming Catalogue • To change the coin you wish to accept, simply lift up the retaining bracket and insert