Coiled Tubing Smart-J Tension Packer Technical Datasheet

7/21/2019 Coiled Tubing Smart-J Tension Packer Technical Datasheet

1/4

This document is uncontrolled when printed.

2014 Evolution Oil Tools Inc. All rights reserved.www.eotools.com Toll Free: 1-800-265-TOOL

CT_Smart-J_Packer-TDS_Rev-A (Coiled TubingSmart-J Tension Packer) September 2014

Completion Tools

Coiled Tubing Smart-J Tension Packer

Tension-set packer for coiled tubing operations

Applications

Tension packer for coiled tubing

Waterflooding operations

Pressure testing

Can be used as a completion packer

Features & Benefits

Packer can be set without rotating tubing.

Short And Compact - Increases the efficiency of

handling, shipping, and storing of the tool

Rocker-Type Slip Design - Eliminates the need for

extra drag blocks, slip tie links, and guide grooves,

allowing for shorter overall length but ones

permanently free from stuck or cocked slips.

Easy To Operate - A simple and reliable J-Slot

mechanism, actuated from the surface by tubing

rotation, makes the packer easy to set and release.

Packing Element System - For temperatures up to

250 F, the standard 80 D (durometer) element can

be used with sizes 41 through 51, and for

applications above 250 F, a 90 D element is

available. The Size 53 and 55 tools use a 70 D

element, rated to 225 F. Standard and alternate

elements are also available for higher temperatures.

Full-Bore - Larger than tubing drift diameter. Any

instruments capable of passing thru the tubing can

be run thru the packer. Full ID also assists in

preventing screen-out and subsequent plugging of

the tubing during fracturing.

Redress Kits available, extending tool life

Description

The EvolutionCoiled Tubing Smart-J

Tension Packer CT-Smart-J Packer)

provides a compact, economical

retrievable packer for use where a set-

down type packer for coiled tubing

operations. This packer can be set

without rotating the tubing.

Although designed primarily for

waterflooding, this packer can also be

used for such pressuring operations as

formation fracturing in shallow or low-

fluid-level wells.

With the Smart-J mechanism built into

the mandrel of the CT-Smart-J Packer,

you do not have to remove the tool

from the hole to reset. Simply lift the run

down the length of the J-mechanism (6

inches). The packer will only operate in

tension.
http://www.eotools.com/http://eotools.com/index.php/component/virtuemart/271/22/completion-tools/packers/coiled-tubing-smart-j-tension-packer-detailhttp://eotools.com/index.php/component/virtuemart/271/22/completion-tools/packers/coiled-tubing-smart-j-tension-packer-detailhttp://eotools.com/index.php/component/virtuemart/271/22/completion-tools/packers/coiled-tubing-smart-j-tension-packer-detailhttp://eotools.com/index.php/component/virtuemart/271/22/completion-tools/packers/coiled-tubing-smart-j-tension-packer-detailhttp://www.eotools.com/


2/4


www.eotools.com

Operation

To Set PackerRun the packer to desired setting depth, making the

last movement down before attempting actual set.

The packer operates with a continuous J mechanism.

Each time the packer is moved down, and then up in

the well, the J system automatically moves from the

running position to the set position or vice versa.

For instance, when running the packer in the well, if

the tubing is stopped and then moved upwards, the

packer will be in the set position and the slips will

engage the casing walls. The application of additional

tension will then cause the packer elements to seal

against the casing.

To Release Packer

Repeating the downward motion will relax the slips

and disengage the packer from the casing.

Emergency ReleaseFor use under extreme conditions, two

safety release methods are available.

1. The CT-Smart-J Packer has an

emergency Shear Ring installed on

the Body, below the Guide.

Application of from 25,000 to 50,000

lbs. tension (dependent on strength

of Shear Ring) will shear the Shear

Ring, permitting the Cone, Packing

Element and Guide to drop againstthe Bottom Sub where they will

remain as the Packer is retrieved

from the well.

2. If it is not desirable or practical to pull

50,000 lbs. through the tubing, apply

approximately 10,000 lbs. strain and

rotate the tubing 20 or more turns to

the right. This unscrews the left-

hand safety thread between the Top

Sub and the Body and allowsremoval of the tubing string and the

Top Sub. To remove the remaining

portion of the Packer, install a set of

Jars made up above an overshot,

socket or spear (or the Top Sub),

engage the Packer Body and actuate

the Jars to free the Packer Body from

the casing.

Redress Kits (including such items as

packing elements, seal rings, etc.) areavailable.


3/4

This document is uncontrolled when printed.

2014 Evolution Oil Tools Inc. All rights reserved.www.eotools.com Toll Free: 1-800-265-TOOL

CT_Smart-J_Packer-TDS_Rev-A (Coiled TubingSmart-J Tension Packer) September 2014

Completion Tools

Specifications

Casing Packer

Preferred Range

of Casing IDs

Guide

Ring

OD

Packer

Element

OD

Minimum

Collapsed

Diameter

of Slips

Maximum

Casing ID

Slip

Travel

Thread

Spec.

Box x

Pin

Item

Number

OD

Weight

Lbs/ft

Size Bore MIN MAX

4 9.5-13.5 43A 1.895 3.910 4.160 3.771 3.719 3.787 4.170

2 3/8

EUE

104979

5 20-23 45A2 1.978 4.625 4.778 4.500 4.375 4.543 4.966 105138

7 26-29 47B2 2.416 6.136 6.276 5.968 5.781 5.919 6.528

2 7/8

EUE

105139

Additional sizes and ranges available upon request
http://www.eotools.com/http://eotools.com/index.php/component/virtuemart/272/37/completion-tools/packers/ct-smart-j-packers/dta-5-12-x-2-78-65-eue-boxpin-w-nickel-plated-anchor-blocks-252-detailhttp://eotools.com/index.php/component/virtuemart/272/37/completion-tools/packers/ct-smart-j-packers/dta-5-12-x-2-78-65-eue-boxpin-w-nickel-plated-anchor-blocks-252-detailhttp://eotools.com/index.php/component/virtuemart/273/37/completion-tools/packers/ct-smart-j-packers/-2014-05-07--detailhttp://eotools.com/index.php/component/virtuemart/273/37/completion-tools/packers/ct-smart-j-packers/-2014-05-07--detailhttp://eotools.com/index.php/component/virtuemart/274/37/completion-tools/packers/ct-smart-j-packers/7-ct-smart-j-packer-26-29-2-38-eu-b-x-p-detailhttp://eotools.com/index.php/component/virtuemart/274/37/completion-tools/packers/ct-smart-j-packers/7-ct-smart-j-packer-26-29-2-38-eu-b-x-p-detailhttp://eotools.com/index.php/component/virtuemart/274/37/completion-tools/packers/ct-smart-j-packers/7-ct-smart-j-packer-26-29-2-38-eu-b-x-p-detailhttp://eotools.com/index.php/component/virtuemart/273/37/completion-tools/packers/ct-smart-j-packers/-2014-05-07--detailhttp://eotools.com/index.php/component/virtuemart/272/37/completion-tools/packers/ct-smart-j-packers/dta-5-12-x-2-78-65-eue-boxpin-w-nickel-plated-anchor-blocks-252-detailhttp://www.eotools.com/


4/4


www.eotools.com

CANADA

#3, 1820 30thAve NE

Calgary, Alberta T2E 7M5

Toll Free: 1-800-265-TOOL (8665)

Main: 403-243-1442

Fax: 403-258-2614

6415A - 63 St. Close

Lloydminster, Alberta T9V 3B5Tel: 780-522-8294

Fax: 780-875-6337

4512 81 Ave

Edmonton, Alberta

Tel: 587-758-9091

Cell: 780-919-1722

Cell: 780-893-1019

UNITED STATES OF AMERICA

P.O. Box 5363

2908 Coffey Street

Victoria, Texas 77903

Main: 361-575-7900

Fax: 361-575-8081

2400 Kermit Hwy

Odessa, Texas 79764Cell: 432-638-7902

www.eotools.com
http://../Working%20Docs/www.eotools.comhttp://../Working%20Docs/www.eotools.com

Documents

Coiled Tubing Smart-J Tension Packer Technical Datasheet