Colour : Reddish Brown

Clarity : Clear

Gel Tail : Absent

Viscosity (40% in MTO at 30 degrees) : 25 to 100 seconds

Finish on hegman gauge : 5+

Non Volatile : Solids as specified

Specific Gravity : 0.900.02

Gloss : 90 minimum

MTO Tolerance : 1:Infinite

Flexibility & Adhesion : Good

Surface Dry : 30 Minutes

Tack free Dry : 90 minutes

Hard Dry : 4-5 Hours

The film is resistant to water , acid (2% H2SO4) and alkali (1% sodium hydroxide) and 5% sodium bi-carbonate solution and gives good anti corrosive properties.

LEAD 0.5%,COBALT 0.1%, MANGANESE 0.2% as metals on the solid content of the resin are recommended. If required the proportion of the manganese can be increased upto 0.3% for better effects. After addition of the driers ageing for 24 hours is recommended

218kgs/18kgs Drums

This product can be supplied as per customer choice if any or against different specification .

CNSL resins & varnish should not be ground with all types of inorganic pigments as a safety measure to avoid fattening & further polymerisation of the end product . to avoid this problem varnish & pigment should be ground separately in case of pigments like zinc chrome, persiun blue, lemon chrome etc.