Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
The MT Series offers simple second
op loading with a stock gantry loader
and staging area. A comparable lathe
tended by a robotic arm in a package
could run up to twice the price of the
MT. The MT’s cost effectiveness comes
from including the machine tending
in the design and manufacturing
from the start.
MT-108A
Automated Loading Made Easy!!
The rigid mechanical configurations yield a very high level of reliability and easy access to the machine operation and maintenance. The MT series is a fine integration of high quality and affordable prices.
Fanuc 0i-TF controller
Fanuc is a technological leader with unsurpassed reliability and technical support. We here at Cubic have worked with Fanuc to tune the servo and spindle motors to deliver fast C-axis response rate as well as fast spindle and linear axis acceleration.
Spindle and body for strength
The ergonomically placed 10 hp spindle provides operation with optimal working condition while the sturdy 30 degree slant bed provides a vibration free operation of the machine. Available in chuck sizes of 6 and 8 inches.
Turret Lathe live tool available
The MT series comes with a 10-12 tool turret offering versatility and helping maintain tooling consistency during lights out cutting. Also available with Live tooling.
Description MT-108A
Travels X travel 200 mm 7.9 inchZ travel 300 mm 11.8 inchSwing over bed 570 mm 22.4 inchSwing over cross slide 345 mm 13.6 inchMaximum cutting diameter 385 mm 15.2 inchMaximum cutting length 260 mm 10.2 inch
Workholding Hydraulic chuck 203 mm 8 inchMain spindle Maximum speed 4500 rpm 4500 rpm
Spindle type A2-6 A2-6Spindle bore 61 mm 2.4 inchSpindle taper 1/20 1/20Motor type βi8/10000 βi8/10000Motor power 7.5 / 11 kw 10/15 hp
Turret Tool stations 10 10OD tool diameter 25 mm 0.984252 inchID tool diameter 40 mm 1.5748 inchTool change time (neighboring tool) 0.3 sec 0.3 secTool change time (180º) 0.9 sec 0.9 sec
Servo (XYZ) Servo motors X/Z (β8/3000is) 1.2 kw 2 hpRapid traverse X/Z (G00) 15 / 18 m/min 590 / 708 ipmCutting rate X/Z (G01) 8 m/min 314 ipmCutting rate Y (G01)Positioning accuracy ±0.01 mm 0.00039 inchRepeatability ±0.005 mm 0.00019 inch
Gripper Gripper type (customizable) 90° twin gripper 90° twin gripperPayload (customizable) 5 kg 11 lbGripper activation Pneumatic PneumaticGripper stroke 8 mm 0.3 inchGripper unit swivel 180º 180º
Gantry robot Rapid traverse (X) 60 m/min 2362 ipmRapid traverse (Y) 60 m/min 2362 ipmPositioning accuracy ±0.05 mm 0.0019 inchPart changing time 6-12 sec 6-12 secElectrical requirement (3-phase, 220V) 2-6 kva 2-6 kvaAir pressure requirement 5.5kg/cm^2 78 psiAir flow requirement 50~60 liter/min 1.7~2.1 cfmX axis motor power / maximum load 0.4 kw / 45 kg 0.5hp/100lbY axis motor power / maximum load 0.4 kw / with brake) 0.5 hp (with brake)Y axis speed reducer LM SB62-5-P2 LM SB62-5-P2Enclosure Fully enclosed Fully enclosed
Part conveyor Number of vertical stacker pallets 10 10Part diameter 22 ~ 150 mm 0.86~ 6 inchRotary conveyor 1 1Elevator 2 2
Dimensions Machine height (excluding gantry robot) 1818 mm 71.6Machine height (including gantry robot) 2414 mm 95 inchMachine depth (including gantry robot) 1535 mm 60 inchMachine width (including gantry robot) 2151 mm 85 inch
Coolant system Capacity 110 liter 29 gallonNet weight Machine net weight with gantry robot) 3250 kg 7165 lbs.
MT-108A Specification
MT-108A SPECIFICATIONS
© 2018 Cubic Machinery, Inc. CUBIC, the CUBIC logo are trademarks and/or registered trademarks of Cubic Machinery, Inc. in the United States and other countries. All rights reserved. All company and/or product names are trademarks and/or registered trademarks of their respective manufacturers. Features, pricing, availability, and specifications are subject to change without notice.
CUBIC 13401 Benson Ave., Chino, CA, 91710Office: (909) 590-9995Email: [email protected]: www.cubicmachinery.com