Upload
others
View
7
Download
1
Embed Size (px)
Citation preview
CNC Lathe
The best standard model―continuously evolving with the voice of the customers, popular in worldwide!
Expanded machining range―Powerful turning,
sophisticated precision machining, milling*1.
Long experience and great technique for automation.
1-spindle and 1-turret CNC lathes providing the highest quality and versatility.
8" Chuck 8" Chuck 10" ChuckC-C L3 L6
Max. Turning Diameter φ410 φ410
Max. Turning Length 300 600
Bar Capacity 51 51
C-C L3 L6
Max. Turning Diameter φ410 φ410
Max. Turning Length 300 600
Bar Capacity 51 51
C-C L3 L6
Max. Turning Diameter φ410 φ410
Max. Turning Length 250 550
Bar Capacity 74 (OP.89) 74 (OP.89)
Gantry Loader Gantry LoaderGantry Loader C-Axis Milling C-Axis Milling
Chosen from all over the world for its
high cutting performance and versatility.
*1) TCN-2100CM/2600CM
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 21
OptionTakisawa has delivered many 8"/10"CNC lathes.
Our machines can flexibly support various workpieces,
such as flange workpiece and shaft workpiece.
In addition, we can suggest optimum plans for customers
considering automation.
ENERGY SAVING SYSTEM・ Power consumption reduction
Application of regenerative energy system helps generated
energy return to the power supply when the motor is
decelerating, saving power consumption.
Energy saving LED is used for internal lighting. Lighting
shutoff function reduces standby power.
Control panel cooling system designed for power saving by
utilising the natural heat dissipation.
With the coolant pump only running when required for use
in program un necessary power consumption is avoided.
Compact & space saving,
but operability-oriented.The headstock, carriage, turret, and tailstock (option) are
arranged on the tough box-shaped bed in an optimum balance
to realize the compact and space saving machine.
The machine is made thoroughly compact and space-saving, but
the door opening is wide. It makes accessibility to the spindle
excellent and tip change and setup change easy.
Door Opening Width : 430mm(L3)
Opening to Spindle Center Distance : 270 mm
Height form Floor to Spindle Centerline : 1080mm
In addition to the maintenance window of former machines, a
removable tailstock maintenance window is added under the
operation panel to significantly improve setup property and
maintainability.
Box Shaped Bed & Box Slide WayBox-shaped bed construction having very high rigidity resistive
to thermal deformation.
Rectangular slideways excellent in high reliabil ity and
high durabi l ity owing to Takisawa's long experienced
scraping (facing-up) technique are used in a l l axes.
They contribute to keeping stable accuracy for a long time.
Machining RangeThe appearance is compact, but the machining range is wide.
The rapid traverse rate is increased compared to our former
machines to reduce machining time.
Highly Rigid HeadstockThe headstock is designed for high torque and provides
excellent cutting performance.
Continuous rated torque is
improved compared to former
machines by reviewing the
spindle motor and reduction
ratio.
270mm
1080m
m
430mm(L3)
Capability・Performance
TCN-2100V.EDITION
TCN-2100 TCN-2600
Output 11/7.5kW 11/9kW 11/9kW
Continuous Rated Torque 71.6N・m 114.6N・m 214.9N・m
Max. Turning Diameter φ410mm (T8)
Max. Turning Length 300mm (L3)
Rapid Traverse Rate X-Axis 24m/min
Z-Axis 30m/min
3200min-1 Type
・ Lubricant recovery box designed for reducing the amount of
coolant waste.
・ The powder coating machine for environmental concern.
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 43
415
sp.center
240
205
230st.
35
350
150
□20□25
□20
30
55
□253535
30
25
35
T8
HO1MA-8S-A6-J LC4X-6W(NSK)
415
40
107.3415 [115]120st.69.7
143
90
Opp
osi
te S
ide 3
50
125
7
100 [80]
600 [300]
240
25
1.5”
9.45”
7.95”16.34”
6”
MAX.
0.75”
0.25
”
1”1.5”
1.2
5” 1”
1.5”
φ560
φ560
MAX.
Std. Turni
ng Diaφ
281
11.34”
Max. Turning D
iaφ410
15.9”
9.05”
23.87” [12.07”]
7.95
”
1.1”
29.5” [17.7”]
16.3
4”
9.05
”
Z-Axis Stroke 650 [370] 25.6” [14.6”]
607 [307]
Z-Axis Ref. Point 750 [450]
35
1.5”
X-A
xis
Ref
. Poi
nt20
5
X-A
xis
Stro
kel 2
30
658 [358]85
Max
. Sw
ing
φ400 *
φ320
▲ TCN-2100L3 V.EDITION
While keeping the high performance dedicated
for turn ing , V .EDIT ION has min imum
required functions, providing excellent cost
performance.
11/7.5kWβiI8/10000
15(kW)
(min-1)
10
5
00
140.1
Nm
95.5
Nm
71.6
Nm
7501000 2000 3000
2250
Continuous Operating Area
15min, S3 25% Operating Area
60min, S3 40% Operating Area
7.96
5.4
2.21.5
11kW
7.5kW
3200
3200min-1 Standard
HO1MA-8S-A6-J LC4X-6W(NSK)
T12
40
107.3415 [115]120st.69.7
143
90
7
100 [80]
600 [300]
Opp
osi
te S
ide 4
20
205
60
415
353530
150 170
230st25
30
35
□25□25
35
35
□20□20
55
φ32
415
420 205
sp.center
φ32
9.05
”X-
Axi
s St
roke
l 230
0.75”
1.25”
0.25
”
1”
1”
1.5”
23.87” [12.07”]
2.4
8”
29.5” [17.7”]
16.3
4”
25.6” [14.6”]
1.5”
Z-Axis Stroke 650 [370]
607 [307]
Z-Axis Ref. Point 750 [450]
35X-
Axi
s R
ef. P
oint
170
6.5
7”
6” 6.57”
9.05”
1.5”
1.5”
1.5”
Std. Turning Diaφ221 8.86”
8.07”
16.34”
MAX.φ560
Max. Turning Diaφ340
13.14”
1.25”
658 [358]85
Max
. Sw
ing
φ400
φ320
Turning Turret (T8) Turning Turret (T12)
Powerful Turret Turning Turret
Direct-mount type powerful turret.
Two types of 8-(Standard) and 12-(Option) station turret are
available.
C-C L3 L6
Max. Turning Diameter φ410 φ410
Max. Turning Length 300 600
Bar Capacity 51 51
Gantry Loader
Highly Rigid SpindleHighly efficient spindle motor delivers enough torque from low
speed to high speed ranges.
Hydraulic Tailstock (Optional)
Supporting highly rigid
hydraulic tailstock
Even shaft workpieces can be
cut powerfully without paying
attention to runout.
Turning
T12
Turning
T8
Turning Model
Interference・Travel Range
TCN-2100 V.EDITIONTailstock Travel 115mm (L3), 415mm (L6)
Quill Travel 120mm
Quill Diameter 75mm
Quill Taper MT No.4
Spindle Nose A2-6
Bearing Inside Diameter
φ100mm
Unit : mm inch
[ ] dimension are L3. area are swing area.
*) Although, Max Turning Dia is φ 410mm, due to the interference with
standard type front cover, Max turning Dia is limited to φ400mm.
Machine C-C TurretDimensions
A B
TCN-2100 L6T8 410
600T12 340
φ13
0
450457
A : φ
Max
. Tur
ning
Dia.
B : Max. Turning Length
Interference of work and cover.
The Limit of the Turning RangeDue to the spec. of L6, there might be the limit for
maximum turning diameter depending on the work size.
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 65
Additional machinings such as milling, drilling and tapping after turning can be performed by one chucking.
HO1MA-8S-A6-J LC4X-6W(NSK)
T12
40
107.3415 [115]120st.69.7
143
90
7
100 [80]
600 [300]
Opp
osi
te S
ide 4
20
205
60
415
353530
150 170
230st25
30
35
□25□25
35
35
□20□20
55
φ32
415
420 205
sp.center
φ32
9.05
”X-
Axi
s St
roke
l 230
0.75”
1.25”
0.25
”
1”
1”
1.5”
23.87” [12.07”]
2.4
8”
29.5” [17.7”]
16.3
4”
25.6” [14.6”]
1.5”
Z-Axis Stroke 650 [370]
607 [307]
Z-Axis Ref. Point 750 [450]
35X-
Axi
s R
ef. P
oint
170
6.5
7”
6” 6.57”
9.05”
1.5”
1.5”
1.5”
Std. Turning Diaφ221 8.86”
8.07”
16.34”
MAX.φ560
Max. Turning Diaφ340
13.14”
1.25”
658 [358]85
Max
. Sw
ing
φ400
φ320
T12M
LC4X-6W(NSK)HO1MA-8S-A6-J
72.72.3
MA
X.φ
13
122.7
140
100
2.385
40
143
107.369.7 120st. 415 [115]
508 [208]
50
90
Opp
osi
te S
ide 3
00
265
MA
X.φ
32
50
90
415
55
80
115
35
90
(Too
l Hol
der)
725 2
MAX. φ560
90
80
MAX. φ13
□20
□25
125
110
90
110
MAX. φ560
MAX. φ13
90
90
90
90
80
sp.center
MAX. φ13 75
MAX
.50
35
□20
□25
150 125
300 265
415
230st.
110
φ243
φ25
φ22
3.5
φ22
3.5
φ32φ32
90 35
90
110
30
φ68
16.34”
1.47”
9.05”
Max. Turn
ing Diaφ
280
10.84
”
0.75
”
1”6”
8.79
9”
Std. Turn
ing Diaφ
243
9.65”
Z-Axis Ref. Point 685 [385]
Z-Axis Stroke 600 [300]
542 [242]
23.6” [11.8”]
21.32” [9.52”]
X-A
xis
Ref
. Poi
nt 1
75
6.89”
X-A
xis
Stro
ke 2
30
26.95” [15.15”]
3.6
3”
16.3
4”
2.16
”
9.05
”
5.4
2”
1.47”
9.661”
566 [266]85
Max
. Sw
ing
φ400
φ320
415
sp.center
240
205
230st.
35
350
150
□20□25
□20
30
55
□253535
30
25
35
T8
HO1MA-8S-A6-J LC4X-6W(NSK)
415
40
107.3415 [115]120st.69.7
143
90
Opp
osi
te S
ide 3
50
125
7
100 [80]
600 [300]
240
25
1.5”
9.45”
7.95”16.34”
6”
MAX.
0.75”
0.25
”
1”1.5”
1.2
5” 1”
1.5”
φ560
φ560
MAX.
Std. Turni
ng Diaφ
281
11.34”
Max. Turning D
iaφ410
15.9”
9.05”
23.87” [12.07”]
7.95
”
1.1”
29.5” [17.7”]
16.3
4”
9.05
”
Z-Axis Stroke 650 [370] 25.6” [14.6”]
607 [307]
Z-Axis Ref. Point 750 [450]
35
1.5”
X-A
xis
Ref
. Poi
nt20
5
X-A
xis
Stro
kel 2
30
658 [358]85
Max
. Sw
ing
φ400 *
φ320
Turning Turret (T12)
Turning Model, Turning & Milling Model
11/9kWαiI8/8000
15(kW)
(min-1)
10
5
00
114.6
Nm140.1
Nm
7501000 2000 3000
3200
Continuous Operating Area
30min, S3 60% Operation Range
7.5
10.3
8.4
5.5
9kW
11kW
4000
3200min-1 Standard
Turning & Milling Turret (T12M)
5.5/3.7kW6000min-1
3.7kW
3.3
5.5kW4.8
60004500
2
4
6
0
(kW)
0 1500(min-1)
βiI3/10000
Continuous Operating Area
15min,S3 25% Operating Area
60min,S3 40% Operating Area
17.7Nm
23.6
Nm
23.6
Nm3
5.0
Nm
Milling Spindle
▲ TCN-2100L3
C-C L3 L6
Max. Turning Diameter φ410 φ410
Max. Turning Length 300 600
Bar Capacity 51 51
Gantry Loader C-Axis Milling
Turning & Milling
T12M
Machine C-C TurretDimensions
A B
TCN-2100 L6T8 410
600T12 340
φ13
0
450457
A : φ
Max
. Tur
ning
Dia.
B : Max. Turning Length
Interference of work and cover.
The Limit of the Turning RangeDue to the spec. of L6, there might be the limit for
maximum turning diameter depending on the work size.
Powerful TurretTurning Turret
Direct-mount type powerful turret. Two types of
8-(Standard) and 12-(Option) station turret are available.
Turning & Milling Turret
Holder type 12-station turret that allows the
turning and milling tools to be attached to all
station. The holder uses bolt tightening system
to support heavy-duty cutting. Highly efficient
5.5/3.7kW milling motor is used for rotary tools.
Highly Rigid SpindleHighly efficient spindle motor delivers enough torque from low
speed to high speed ranges.
Spindle Nose A2-6
Bearing Inside Diameter
φ100mm
Hydraulic Tailstock (Optional)
Supporting highly rigid
hydraulic tailstock
Even shaft workpieces can be
cut powerfully without paying
attention to runout.
TCN-2100Tailstock Travel 115mm (L3), 415mm (L6)
Quill Travel 120mm
Quill Diameter 75mm
Quill Taper MT No.4
Interference・Travel Range
Turning
T12
Turning
T8
Unit : mm inch
[ ] dimension are L3. area are swing area.
*) Although, Max Turning Dia is φ 410mm, due to the interference with
standard type front cover, Max turning Dia is limited to φ400mm.
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 87
T12M
HO1MA-10S-A8-JLC-5WAUR-00(NSK)
107.3120st.19.7
50
MA
X.φ
13
90
90
(Too
l Hol
der)
140
Opp
osi
te S
ide 3
00
265
MA
X.φ
32
MA
X.φ
32
90
122.7
50
415
55
80
1152.3
35
725 2
80
153
45
10010072.72.3
415 [115]
458 [158]
MAX. φ560
90
80
MAX. φ13
□20 □
25
125
110
90
110
MAX. φ560
MAX. φ13
90
90
90
90
80
sp.center
MAX. φ13 75
35
□20 □
25
150 125
300 265
415
230st.
110
φ243
φ25
φ22
3.5
φ22
3.5
φ32φ32
90 35
90
110
30
φ68
MAX
.50
X-A
xis
Ref
. Poi
nt17
5
X-A
xis
Str
oke
2301.
47”
5.4
2”
9.05
”
6.89
”
2.16
”
3.6
3”
16.3
4”
Z-Axis Ref. Point 645 [345] 25.39” [13.58”]
492 [192] 19.37” [7.55”]
Z-Axis Stroke 600 [300] 23.6” [11.8”]1.77”
Max. T
urning
Dia.
φ28
0
10.84
”
0.75
” 1”
6”
16.34”
9.05”
9.661”
8.79
9”
Std. Turn
ing Dia.
φ243
9.65”
1.47”
566 [266]45
Max
. Sw
ing
φ400
φ320
T8
LC-5WAUR-00(NSK)
41535
80
240
153
60 [40]
25O
pposi
te S
ide 3
50
125
7550 [250]
415 [115]120st.
90
107.319.7
HO1MA-10S-A8-J
415
sp.center
240
205
230st.
35
350
150
□20
5
□25□20
30
5
□2535
30
25
35
X-A
xis
Ref. P
oin
t205
X-A
xis
Str
oke
230
Z-Axis Ref. Point 710 [410]
557 [257] 21.93” [10.10”]
Z-Axis Stroke 650 [370]2.37” [1.58”]
25.6” [14.55”]
1.5”
9.45”
7.95”6”
0.75”
0.25”
1”
1.5”
1.25
”
1”
1.5”
φ560
MAX.
Std. Turni
ng Dia. φ
281
11.34”
Max. Turning D
ia. φ410
15.9”
9.05”
0.28”
7.9
5”
1.1
”
3.78”
27.95” [16.14”]
16.3
4”
9.05
” 1.5
”
16.34”
658 [358]45
Max
. Sw
ing
φ400
*
φ320
▲ TCN-2600L3
11/9kWαiIP18/6000
15(kW)
(min-1)
10
5
00
4001000 2000 3000 3200
3200min-1
9kW 9
1111kW
Continuous Operating Area
30min,S3,60% Operating Area
214.9
Nm2
62.7
Nm
Standard
Turning Model, Turning & Milling Model
The smallest space in 10"-Chuck class of machines. (L3) Highly efficient spindle motor achieves enough torque form low speed to high speed ranges.
φ13
0
450457
A : φ
Max
. Tur
ning
Dia.
B : Max. Turning Length
Interference of work and cover.
The Limit of the Turning RangeDue to the spec. of L6, there might be the limit for
maximum turning diameter depending on the work size.
Machine C-C TurretDimensions
A B
TCN-2600 L6 T8 410 550
TCN-2600Tailstock Travel 115mm (L3), 415mm (L6)
Quill Travel 120mm
Quill Diameter 100mm
Quill Taper MT No.5
Spindle Nose A2-8
Bearing Inside Diameter
φ120mm
OP.φ150mm
C-C L3 L6
Max. Turning Diameter φ410 φ410
Max. Turning Length 250 550
Bar Capacity 74 (OP.89) 74 (OP.89)
Gantry Loader C-Axis Milling
Highly Rigid SpindleHighly efficient spindle motor delivers enough torque from low
speed to high speed ranges.
Hydraulic Tailstock (Optional)
Supporting highly rigid
hydraulic tailstock
Even shaft workpieces can be
cut powerfully without paying
attention to runout.
Powerful TurretTurning Turret
Direct-mount type powerful turret.
8-station turret is available as standard.
Turning & Milling Turret
Holder type 12-station turret that allows the
turning and milling tools to be attached to all
stations. The holder uses bolt tightening system
to support heavy-duty cutting. Highly efficient
5.5/3.7kW milling motor is used for rotary tools. Turning & Milling Turret (T12M)
5.5/3.7kW6000min-1
3.7kW
3.3
5.5kW4.8
60004500
2
4
6
0
(kW)
0 1500(min-1)
βiI3/10000
Continuous Operating Area
15min,S3 25% Operating Area
60min,S3 40% Operating Area
17.7Nm
23.6
Nm
23.6
Nm3
5.0
Nm
Milling Spindle
Interference・Travel Range
Turning & Milling
T12M
Turning
T8
Turning Turret (T8)
Unit : mm inch
[ ] dimension are L3. area are swing area.
*) Although, Max Turning Dia is φ 410mm, due to the interference with
standard type front cover, Max turning Dia is limited to φ400mm.
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 109
Variations
We can propose automatic system configuration with high
productivity according to workpieces.
*TCN-2100V.EDITION is C-Type only.
Loader HandWe will provide optimum one according to the application.
Parallel type (Example: for flange)
Swivel type (Example: for palletizer)
Standard : Work FeederThree-guide-bar specification Center pole specification
Machine 1 Unit Width Workpiece handled by unit (diameter x length, weight)
TCN-2100G 600mm φ160×100, 3kg
TCN-2600G 720mm φ200×140, 5kg
Measuring Unit Washing Unit Positioning Unit by Camera
■ Loader SpecificationTCN-2100G TCN-2600GL3 L6 L3 L6
Target
Workpiece
Outside
Diametermm inch 160 6.3" 200 6.3"
Length mm inch 100 3.94" 140 5.51"
Weight kg lbs 3 6.6 (×2) 5 11 (×2)
Travel
(Running
Speed)
Verticalmm inch
(m/min ipm)690 27.17"
(160 6299.21")770 30.31"
(120 4732.41")
Longitudinalmm inch
(m/min ipm)
1450 57.09" (200
7874.02")
1750 68.90" (200
7874.02")
1520 59.84" (180
1089.61")
1820 71.65" (180
1089.61")
■ Work Piece Feeder SpecificationsNumber of Pallets 16 14
Loading Capacity kg lbs 40 88 70 154
Maximum Height mm inch 450 17.72" 400 15.75"
Promptly Compatible with Turnkey SystemPeripheral Device Modular UnitThe loader peripheral device is unitized as a package. It
is flexibly applicable for automatic cell with previous and
subsequent processes such as positioning by camera and
measurement.
【Folder Display for all Process】 All the flows of Process can be checked on the screen.
【Elaborate Process display function】 All processing data can be checked and seen on the screen.
Takisawa original "Process expansions, folder function" and easy understandable icon makes
higher visibility. Operator friendly, easily understandable main screen has been established.
Easy to See
By just inserting Cutting data on each process Tag, the Process can be completed.
In Input window for arbitrary shape, Intersection Point will be calculated automatically.
Suitable Cutting Data can be selected from reference Data Bank
During preparing Program, "Reliable Guide
Function" provides good support.
Due to availability of guiding Figures & Icons,
it is easy even for beginners to use interactive
data inputting.
Inputting arbitrary shapes, even complicated
ones, can be done easily by using symbolic
soft key on the exclusive window.
“Reliable Guide Function”
By interactivity with the machine, only
selecting the required program, the "Tag"
will be arranged in the optimum order
automatically.
TAG
Easy to Use
}
Menu Selection such as Process, Data selection can be easily done with minimum input due
to Takisawa Standard initial Data (Tooling Data & Cutting Parameter)
In case of new work piece Programming, number of input Items are much less due to automatic cutting data setting.
Example) In case Selection for Process, only to press Numeric Key "3"
「Tooling Data & Material Data」
Depending on the Combination of work piece and Inserted Material, Cutting Parameter
(Cutting Speed, Feed rate ,depth of cut) will be decided automatically and suggested to the
operator. This will assist the operator greatly in set-up.
Speed Up
Machining SimulationTool paths can be certainly checked before test cutting by "3D Animation" or "Tool Tracking".
Supply/Discharge Unit
High-Speed Gantry Loader System Perfect Dialogue Program ProcessorProgramming Machining Simulation Automatic Operation
Complete Support
Tiwap-1
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 1211
Turning Tool(□25)
Turning Tool(□20)
Turning Tool(□20)
Spacer
Spacer
Bar Bush
for φ6/8/10/12/16/20/
25/32*1
Drill Socket
for MT No.1/2/3/4*1
U-Drill Socket
for φ20/25/32*1
Drill Collet
for φ1/2/3/4/5/6/7/8/9/10/
11/12/13
Tapping Collet
for M 4/5/6/8/10/12
Bar Bush
for φ6/8/10/12/16/20
Drill Socket
for MT No.1/2
Bar Bush
for φ6/8/10/12/16/20/25
Drill Socket
for MT No.1/2/3
U-Drill Socket
for φ20
U-Drill Socket
for φ20/25
U-Drill Holder(φ32)
U-Drill Holder(φ25)
Boring Bar / Drill Holder
(φ32)
Boring Bar / Drill Holder
(φ25)
Facing Holder
OD Tool Holder
Rotary Tool Holder
(Z-Axis)
Rotary Tool Holder
(X-Axis)
U-Drill Holder
(φ32/40*1)
Boring Bar / Drill Holder
(φ32/40*1)
Facing Holder
*1 : for 8-Station Turret
Cover
(No Holder)
Boring Bar
Drill
U-Drill
Drill
Tap
Turning Tool(□25)
Boring Bar
Optional
Drill
Boring Bar
Drill
U-Drill
U-Drill
T12M
T8 / T12
8-Station Turret
12-Station Turret
Rotary Tool Type
12-Station Turret
TCN-2100V.EDITION
TCN-2100
TCN-2100V.EDITION
TCN-2100
TCN-2600
TCN-2100TCN-2600
Tooling System Machine Dimensions
With Gantry Loader System
L3
L6
Unit : mm inch
It is TCN-2100, TCN-2100V.EDITION, TCN-2600 common Dimensions.
[ ] dimension are [TCN-2100V.EDITION], 《 》 dimension are 《TCN-2600》
2108.27”
1810 (CM Type)71.26”
800
Chip Conveyor Pull Out
Side-Discharge Conveyor Type
Rear-Discharge Conveyor Type(4
46)
1552
394
299 《310》
450st.
123(D
oor
Ope
nin
g W
idth)
1080
1700
150
1750 1109 [1088]43.66” [42.83”]
2859 [2838]112.56” [111.73”] 1532 《1543》
11.77” 《12.20”》
60.31” 《60.75”》654 [631]
25.75” [24.84”]
Rear-Discharge Chip Pan Pull Out
755 29.72”
2186 [2163] 《2197》 86.06” [85.16”] 《86.50”》 130051.18”
Chip Conveyor Pull Out
430(Door Opening Width) Side-Discharge
Chip Pan TypeChip Pan Pull Out
842 [
880]
33.1
5” [
34.6
5”]
33.1
5” [
34.6
5”]
471 80018.54” 31.50”
842 [
880]
14.5
6”
61.1
0”
15.4
7”
17.72”
16.93”
66.9
3”
42.5
2”
4.8
4”
5.91”68.90”
31.4”
305
12.0
1”
299 《310》11.77” 《12.20”》
3240 [3196]127.56” [125.83”]
110043.31”
Chip Conveyor Pull Out
2095
1080
1700
130051.18”
Chip Conveyor Pull Out
2186 [2163] 《2197》 86.06” [85.16”] 《86.50”》
1532 《1543》60.31” 《60.75”》
654 [631]25.75” [24.84”]
1145 [1101]
(446)
123(D
oor
Ope
nin
g W
idth)
645(Door Opening Width)
665st.
1552
394
Side-Discharge Conveyor Type
Rear-Discharge Conveyor Type
755Chip Pan Pull Out
Side-Discharge Chip Pan Type
Chip Pan Pull Out
865 [
880]
471 1100
842 [
880]
26.18”
25.39”
14.5
6”
61.1
0”
15.4
7”
4.8
4”
66.9
3”
34.0
6” [
34.6
5”]42.5
2”
82.48”7.15”
89.65”
45.08” [43.35”]
43.31”18.54”
29.72”
33.1
5” [
34.6
5”]
181.6
305
2277 (CM Type)
12.0
1”
Chip Conveyor Pull Out
Chip Pan Pull Out
(1300)
(842)
6541651.525.75”65.02”
1080
738
2863
2125
29.0
6”
112.7
2”
83.6
6”
42.5
2”
33.1
5”
83.7
418.52607.3 【3102】102.65” 【122.13”】
430 【665】(Opening Width)
455st 【690】
1600 【2095】 229.7 614.6
2154
1651.5
(594.4
)65.0
2”
(23.4
0”)
163
Load
er
X-A
xis:
690st
11.9(755)
84.8
0”
19.97” 【26.18”】
17.91”st 【27.17”】
62.99” 【82.48”】6.42” 9.04” 24.2”
(51.18”)
27.1
7” 3.3”
16.48”
0.47”
(29.72”)
Chip Conveyor Pull Out
Chip Pan Pull Out
418.5
(1300)633.3
(880)
(34.6
5”)
695
27.3
6”
1651.5(51.18”)24.93”65.02”
1080
42.5
2”
27.1
7” 83.7
3.3”
16.48”
430 【665】 19.97” 【26.18”】
455st 【690】17.91”st 【27.17”】
1600 【2095】 229.7 615
2154
84.8
0”
(594)
1652
Load
er
X-A
xis:
690st 11.9
0.47”
(755) (29.72”)
2823
3404 【3899】134.02” 【153.50”】
96062.99” 【82.48”】 9.04” 24.21”37.80”
980
(23.3
9”)
65.0
4”
83.5
8”
698
2125
111.1
4”
27.4
8”
83.6
6”
(Opening Width)
TCN-2100G
TCN-2100G V.EDITION Loader C Type
Loader A Type
【 】 dimension are 【L6】
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 1413
Items TCN-2100L3 V.EDITION TCN-2100L6 V.EDITION TCN-2100L3 TCN-2100L6 TCN-2100CML3 TCN-2100CML6 TCN-2600L3 TCN-2600L6 TCN-2600CML3 TCN-2600CML68” Chuck 8” Chuck 8” Chuck 8” Chuck 10” Chuck
Turret T8 T12 T8 T12 T8 T12 T8 T12 T12M T8 T12M
Capability ・Capacity
Maximum Swing *7 mm inch 400 15.75" 400 15.75" 400 15.75" 400 15.75" 400 15.75" 400 15.75" 400 15.75"
Standard Turning Diameter mm inch 281 11.34" 221 8.7" 281 11.34" 221 8.7" 281 11.34" 221 8.7" 281 11.34" 221 8.7" 243 9.65" 281 11.34" 243 *4 9.65"
Maximum Turning Diameter *7 mm inch 410 15.9" 340 13.39" 410 *3 15.9" 340 *3 13.39" 410 15.9" 340 13.39" 410 *3 15.9" 340 *3 13.39" 280 10.84" 410 *3 15.9" 280 10.84"
Maximum Turning Length mm inch 300 11.81" 600 23.63" 300 11.81" 600 23.63" 208 8.19" 508 20" 250 9.85" 550 21.66" 158 6.22" 458 18.03"
Bar Capacity *8 mm inch 51 2.01" 51 2.01" 51 2.01" 51 2.01" 51 2.01" 74 89 2.92" 3.5" 74 89 2.92" 3.5"
TravelX-Axis Travel mm inch 230 9.05" 230 9.05" 230 9.05" 230 9.05" 230 9.05" 230 9.05" 230 9.05"
Z-Axis Travel mm inch 370 14.6" 650 25.6" 370 14.6" 650 25.6" 300 11.8" 600 23.6" 370 14.6" 650 25.6" 300 11.8" 600 23.6"
Spindle
Spindle Speed min-1 3200 3200 3200 5000 3200 5000 3200 5000 3200 2500 *1 3200 2500 *1
Minimum Index Angle (C-Axis) deg - - - - 0.001 - 0.001
Spindle Nose (Nom,Code) A2-6 A2-6 A2-6 A2-6 A2-6 A2-8 A2-8
Spindle-Through Hole Diameter mm inch 63 2.48" 63 2.48" 63 2.48" 63 2.48" 63 2.48" 86 105 3.39" 4.13" 86 105 3.39" 4.13"
Bearing Inside Diameter mm inch 100 3.94" 100 3.94" 100 3.94" 100 3.94" 100 3.94" 120 150 4.72" 5.91" 120 150 4.72" 5.91"
Turret
Turret Type Direct-Mount Type Direct-Mount Type Direct-Mount Type Direct-Mount Type All-Holder Type Direct-Mount Type All-Holder Type
Number of Tools 8 12 8 12 8 12 8 12 12 8 12
Facing Tool Shank Height mm inch 25 1.0" 25 1.0" 25 1.0" 25 1.0" 25 1.0" 25 1.0" 25 1.0" 25 1.0" 25 1.0" 25 1.0" 25 1.0"
Boring Bar Shank Diameter mm inch 40 1.5" 32 1.25" 40 1.5" 32 1.25" 40 1.5" 32 1.25" 40 1.5" 32 1.25" 32 1.25" 40 1.5" 32 1.25"
Rotary Tool
Number of Rotary Tools - - - - 12 - 12
Spindle Speed min-1 - - - - 6000 - 6000
Maximum Tool Shank Diameter mm inch - - - - 13 0.52" - 13 0.52"
Tool Spindle Taper Hole (Nom,Code) - - - - AR20 - AR20
Tool Spindle Bearing Inside Diameter mm inch - - - - 30 1.19" - 30 1.19"
Tailstock
Tailstock Travel mm inch 115 4.53" 415 16.34" 115 4.53" 415 16.34" 115 4.53" 415 16.34" 115 4.53" 415 16.34" 115 4.53" 415 16.34"
Quill Diameter mm inch 75 2.95" 75 2.95" 75 2.95" 75 2.95" 75 2.95" 100 3.94" 100 3.94"
Quill Taper MT.4 MT.4 MT.4 MT.4 MT.4 MT.5 MT.5
Quill Travel mm inch 120 4.73" 120 4.73" 120 4.73" 120 4.73" 120 4.73" 120 4.73" 120 4.73"
Feedrate Rapid Traverse Rate m/min ipm X:24 / Z:30 X:944.88"/ Z:1181.1" X:24 / Z:30 X:944.88"/ Z:1181.1" X:24 / Z:30 X:944.88"/ Z:1181.1" X:24 / Z:30 X:944.88"/ Z:1181.1" X:24 / Z:30 X:944.88"/ Z:1181.1" X:24 / Z:30 X:944.88"/ Z:1181.1" X:24 / Z:30 X:944.88"/ Z:1181.1"
Motors
Spindle Motor kW HP 11/7.5 15/10 (15min/continuous) 11/7.5 15/10 (15min/continuous) 11/9 15/12 (30min, 60%/continuous) 11/9 15/12 (30min, 60%/continuous) 11/9 15/12 (30min, 60%/continuous) 11/9 15/12 (30min/continuous) 11/9 15/12 (30min/continuous)
Rotary Tool Motor kW HP - - - - 5.5/3.7 7.4/5 (15min/continuous) - 5.5/3.7 7.4/5 (15min/continuous)
Axis Feed Motors kW HP X:1.2 / Z:2.5 X:1.6 / Z:3.4 X:1.2 / Z:2.5 X:1.6 / Z:3.4 X:1.2 / Z:2.5 X:1.6 / Z:3.4 X:1.2 / Z:2.5 X:1.6 / Z:3.4 X:1.2 / Z:2.5 X:1.6 / Z:3.4 X:1.2 / Z:2.5 X:1.6 / Z:3.4 X:1.2 / Z:2.5 X:1.6 / Z:3.4
Hydraulic Pump Motor kW HP 1.5 2.0 1.5 2.0 1.5 2.0 1.5 2.0 1.5 2.0 1.5 2.0 1.5 2.0
Coolant Pump Motor kW HP 0.25 0.3 0.25 0.3 0.25 0.3 0.25 0.3 0.25 0.3 0.25 0.3 0.25 0.3
Power Source Required
Total Power Required kVA 15 15 15 15 15 17 17
Tank Capacity
Hydraulic Unit Tank L gal 20 5.28 20 5.28 20 5.28 20 5.28 20 5.28 20 5.28 20 5.28
Lubricant Tank L gal 4.2 1.11 4.2 1.11 4.2 1.11 4.2 1.11 4.2 1.11 4.2 1.11 4.2 1.11
Coolant Tank L gal 120 31.68 130 34.32 120 31.68 130 34.32 120 31.68 130 34.32 120 31.68 130 34.32 120 31.68 130 34.32
Machine Dimensions
Machine Height mm inch 1700 66.93" 1700 66.93" 1700 66.93" 1700 66.93" 1700 66.93" 1700 66.93" 1700 66.93"
Height from Floor to Spindle Centerline mm inch 1080 42.52" 1080 42.52" 1080 42.52" 1080 42.52" 1080 42.52" 1080 42.52" 1080 42.52"
Floor Space Required (Standard Type) *5mm × mm
inch × inch1750 × 1532
68.90" × 60.31"2095 × 1532
82.48" × 60.31"1750 × 1532
68.90" × 60.31"2095 × 1532
82.48" × 60.31"1810 × 1532
71.26" × 60.31"2277 × 1532
89.65" × 60.31"1750 × 1543
68.90" × 60.75"2095 × 1543
82.48" × 60.75"1810 × 1543
71.26" × 60.75"2277 × 1543
89.65" × 60.75"
Machine Weight kg lbs. 2700 5940 3200 7040 2700 5940 3200 7040 2800 6160 3300 7260 2700 5940 3200 7040 2800 6160 3300 7260
Red is optional.
■ Accessories
Machine Specifications
ItemsTCN-2100V.EDITION TCN-2100 TCN-2600
Solid 3-Jaw Hydraulic Chuck ● ● ●
Solid Cylinder ● ● ●
Boring Bar / Drill Holder 3 Pieses *6 ● ● ●
Facing Holder 1 Piese *6 ● ● ●
Boring Bar Bush 3 Pieses ● ● ●
Front Door Interlock ● ● ●
Chuck Open/Close Footswitch ● ● ●
Spindle Orientation 1 Point, No Lock ● ● ●
Coolant Pump 250W, 1 Unit ● ● ●
Lubricant Collection Box *2 witn Pot ● ● ●
Leveling Plate Set ● ● ●
Lighting Apparatus LED ● ● ●
Adjustment Tool Set ● ● ●
Instruction Manual ● ● ●
Chuck Auto Open/Close M-Function ○ ○ ○
Switchable to Two Chuck Pressures ○ ○ ○
Spindle Orientation Disk Brake Type
Max. 360 Point, with B-Function
- ○ ○
Spindle Through-Hole Diameter φ150mm - - ○
Spindle Speed5000min-1 - ○ -
2500min-1 - - ○
Seating Control ○ ○ ○
Chuck Airblow (with M-Function) ○ ○ ○
ItemsTCN-2100V.EDITION TCN-2100 TCN-2600
Spindle Through Airblow (with M-Function) ○ ○ ○
Spindle Through Coolant (with M-Function) ○ ○ ○
Spindle Inner Stopper ○ ○ ○
Spindle Above Coolant ○ ○ ○
Hydraulic Tailstock ○ ○ ○
Tailstock M-Function ○ ○ ○
Tailstock Travel (150mm (with M-Function)) ○ ○ ○
Switchable to Two Tailstock Pressures ○ ○ ○
Quill Inching ○ ○ ○
Rolling Center ○ ○ ○
12-Station Turret Type (T12) ○ ○ -
Boring Bar / Drill Holder ○ ○ ○
Facing Holde ○ ○ ○
U-Drill Holder ○ ○ ○
Boring Bar Bush ○ ○ ○
Spacer ( □ 20mm) ○ ○ ○
U-Drill Socket ○ ○ ○
Drill Socket ○ ○ ○
12-Station Milling Turret Type (T12M) - ○ ○
Rotary Tool Holder X/Z - ○ ○
OD Tool Holder for T12M - ○ ○
Facing Holder for T12M - ○ ○
Boring Bar / Drill Holder for T12M - ○ ○
ItemsTCN-2100V.EDITION TCN-2100 TCN-2600
U-Drill Holder for T12M - ○ ○
Collet Drill/Tap - ○ ○
Tool Setter ○ ○ ○
Counter Various Types ○ ○ ○
Signal Tower Light 3-Color, Lighting ○ ○ ○
Auto Door Left Open ○ ○ ○
Chip Conveyor Various Types ○ ○ ○
Chip Bucket ○ ○ ○
Circuit Breaker ○ ○ ○
100V Outlet ○ ○ ○
Lighting Apparatus 10W ○ ○ ○
Sub-Control Box ○ ○ ○
Parts Catcher ○ ○ ○
Robot Interface 16 Inputs & Outputs ○ ○ ○
Bar Feeder Interface ○ ○ ○
Turret Pusher ○ ○ ○
Work Pusher ○ ○ ○
Hybrid Hydraulic Unit ○ ○ ○
Coolant Pump Various Types ○ ○ ○
Mist Collector ○ ○ ○
Filler Tube Various Types ○ ○ ○
Pull Feeder ○ ○ ○
Temporary Receiver ○ ○ ○
ItemsTCN-2100V.EDITION TCN-2100 TCN-2600
Check for Cutoff (Tactile Sensor) ○ ○ ○
RAKU-RAKU Monitor 3 - ○ ○
Measurement Monitor 3 - ○ ○
Tiwap-1 - ○ ○
Air Conditioner in Control Panel ○ ○ ○
● : Standard ○ : Optional - : None
A variety of optional accessories are available for respective models. The specifications of optional accessories vary depending on the model, thus requiring a separate discussion.
*1) Spindle-through hole diameter 105mm type is spindle speed 2500min-1 only.*2) Lubricant mixing in water soluble coolant is separated, and only the coolant is returned to the
coolant tank. The lubricant collected in the lubricant collection box must be drained periodically. *3) Due to the spec. of L6, there might be the limit for maximum turning diameter depending on the
work size. Please refer to " The Limit of the Turning Range" of 6 page or 8 page or 10 pages.*4) There are 10" Chuck and interference because standard turning diameter is 243mm. *5) Without Oil Pan and Chip Conveyor*6) It is common to CM type.*7) Due to the interference with standard type front cover,
Max Turing Dia and Max Swing is limited to 320mm in the range of 85mm from the chuck face for TCN-2100,Max Turing Dia and Max Swing is limited to 320mm in the range of 45mm from the chuck face for TCN-2600Although, Max Turning Dia is φ 410mm, due to the interference with standard type front cover, Max turning Dia is limited to φ400mm.
*8) Please note the bar capacity follows types of chucks and cylinders.
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 1615
■ Composition
■ Main Function ListSpecifications・Contents
TCN-2100V.EDITION
TCN-2100TCN-2600
0i-TF Type-5 Type-1
【Controlled Axes】Least Input Increment *2 ● ●
Max. Programmable Dimension (±999999.999) ● ●
Cs Contouring Control - CM
Increment System C *3 ▲ ▲
Inch/Metric Conversion ● ●
Interlock ● ●
Machine Lock *4 ○ ○
Emergency Stop ● ●
Stored Stroke Check 1 ● ●
Stored Stroke Check 2, 3 *5 ▲ ▲
Stored Limit Check Before Move ○ ▲
Chuck and Tail Stock Barrier *6 ○ ▲
Mirror Image (Each Axis) ▲ ▲
Chamfering ON/OFF ● ●
Unexpected Disturbance Torque Detection Function *7 G ▲
Position Switch ◎ ◎
【Operation】Automatic Operation (Memory) ● ●
MDI Operation ● ●
DNC Operation *8 *17 ◎ ◎
DNC Operation with Memory Card *8 *9 ◎ ◎
Program Number Search ● ●
Sequence Number Search ● ●
Sequence Number Comparison and Stop ● ●
Wrong Operation Prevention ▲ ▲
Buffer Register ● ●
Dry Run ● ●
Single Block ● ●
Manual Continuous Feed (JOG) ● ●
Manual Reference Position Return ● ●
Reference Position Setting without DOG ● ●
Manual Handle Feed, 1 Unit ● ●
【Interpolation Functions】Positioning (G00) ● ●
Exact Stop Mode (G61) ● ●
Tapping Mode (G63) ● ●
Cutting Mode (G64) ● ●
Exact Stop (G09) ● ●
Linear Interpolation (G01) ● ●
Circular I nterpolation (G02/03) ● ●
Dwell (G04) ● ●
Polar Coordinate Interpolation - CM
Cylindrical Interpolation - CM
Thread Cutting, Synchronous Cutting ● ●
Multi Threading ● ●
Thread Cutting Retract ● ●
Continuous Threading ● ●
Variable Lead Thread Cutting ● ●
Reference Position Return (G28) ● ●
Reference Position return Check (G27) ● ●
2nd Reference Position Return (G30) ● ●
3rd, 4th Reference Position Return ◎ ◎
FANUC : 0i-TF(Type 1, Type 5)
Specifications・ContentsTCN-2100 V.EDITION TCN-2100, TCN-2600
StandardGantry
Loader TypeStandard
Gantry Loader Type
0i-TF Type-5 Type-1
【NC Unit】8.4"Color LCD/MDI ● ● ● ●
10.4"Color LCD - - Tiwap Tiwap
【Software】RAKU-RAKU Monitor 3 - ● ○ ●
RAKU-RAKU Loader 3 - - - Tiwap
RAKU-RAKU Loader 4 - ● - ●
Measurement Monitor 3 *1 - ◎ ◎ ◎
Tiwap-1 - - ○ ○
【Safety Devices】Front Door Interlock ● ● ● ●
Front Door Locking Mechanism ○ ○ ○, CE ○, CE
Dual Check Safety - - CE CE
Control Panel Breaker with Tripper ○ ○ ○ ○
Software* The software specifications are subject to change for improvement without notice.
The loader operation settings can
be changed simply by the operation
from the dedicated screen without
modifying the program.
Easy and conven ien t mu l t i -
functional softwares that can
perform the tool life management,
cut ting load monitoring, group
control, and also run information
collection, Cp (process capability)
calculation, and periodic offset
addition.
■Gantry Loader Type Standard Accessory
Specifications・ContentsTCN-2100V.EDITION
TCN-2100TCN-2600
0i-TF Type-5 Type-1
【Feed Functions】Rapid Traverse Override (F0,25%,50%,100%) ● ●
Feed per Minute ● ●
Feed Per Revolution ● ●
Constant Tangential Speed Control ● ●
Cutting Feedrate Clamp ● ●
Automatic Acceleration/Deceleration ● ●
Rapid Traverse Bell-Shaped Acceleration/Deceleration ● ●
Linear Acceleration/Deceleration After Cutting Feed Interpolation
● ●
Feedrate Override (15 Steps) ● ●
Jog Override (15 Steps) ● ●
Override Cancel ● ●
Manual per Revolution Feed ▲ ▲
【Program Input】Tape Code (EIA/ISO Auto Recognition) ● ●
Label Skip ● ●
Parity Check ● ●
Control In/Out ● ●
Optional Block Skip, 1 Piece ● ●
Optional Block Skip (2 to 9 Pieces) ◎ ◎
Program File Name 32 Characters ● ●
Sequence Number N8 Digits ● ●
Absolute/Incremental Programming ● ●
Decimal Point Programming/Pocket Calculator Type Decimal Point Programming
● ●
Diameter/Radius Programming (X-Axis) ● ●
Coordinate System Setting (G50) ● ●
Automatic Coordinate System Setting ● ●
Direct Drawing Dmension Programming *10 ▲ ▲
G-Code System A ● ●
G-Code System B/C ▲ ▲
Chamfering/Corner R *11 ● ●
Programmable Data Input (G10) ● ●
Sub Program Call (10 Levels) ● ●
Custom Macro ● ●
Additional Custom Macro Common Variables ● ●
Canned Cycle ● ●
Multiple Repetitive Cycles ● ●
Multiple Repetitive Cycles Ⅱ ● ●
Canned Cycle for Drilling ● ●
Circular Dnterpolation by R Programming ● ●
Coordinate System Shift ● ●
Direct Input of Coordinate System Shift ● ●
【Auxiliary / Spindle Speed Function】Miscellaneous Functions (M8 Digits) ● ●
2nd Auxiliary Functionn (B8 Digits) ○ ●
Spindle Speed Function (S5 Digits) ● ●
Constant Surface Speed Control ● ●
Spindle Orientation ● ●
Rigid Tap ● ●
【Tool Functions / Tool Compensation】Tool Function (T2+2 Digits) ● ●
Tool Offset Pairs 99-pairs ● ●
Tool Offset Pairs 128-pairs ▲ ▲
Tool Offset Pairs 200-pairs - ○
Tool Offset ● ●
Tool Radius ・ Tool Nose Radius Compensation ● ●
Tool Geometry/Wear Compensation ● ●
Tool Offset Value Counter Input ● ●
Direct Input of Tool Offset Value Measured ● ●
Direct Input of Tool Offset Value Measured B *12 ○ ○
Tool Life Management *13 ● ●
Tool Geometry Size Data, 100 Pieces - Tiwap
【Accuracy Offset Functions】Backlash Compensation ▲ ▲
Backlash Compensation for Each Rapid Traverse and Cutting Feed
▲ ▲
【Editing】Part Program Storage Size 512Kbyte *18 ● ●
Part Program Storage Size 2Mbyte ○ ○
Specifications・ContentsTCN-2100V.EDITION
TCN-2100TCN-2600
0i-TF Type-5 Type-1
Number of Registerable Programs, 400 Programs *19 ● ●
Number of Registerable Programs Expansion 1, Max. 1000 Programs
○ ○, Tiwap
Part Program Editing ● ●
Extended Part Program Editing ● ●
Program Protect ● ●
Background Editing ● ●
【Setting / Display】Status Display ● ●
Clock Function ● ●
Current Position Display ● ●
Program Comment Display (31 Characters) ● ●
Parameter Setting and Display ● ●
Alarm Display ● ●
Alarm Log Display ● ●
Operator Message History Display ● ●
Operation History Display ▲ ▲
Run Hours and Parts Count Display ● ●
Actual Cutting Feedrate Display ● ●
Display of Spindle Speed and T Code at All Screens ● ●
Directory Display of Floppy Cassette ● ●
Servo Setting Screen ● ●
Maintenance Information Screen ● ●
Data Protection Key, 1 Kind ● ●
Help Function ● ●
Self-diagnosis Function ● ●
Periodic Maintenance Screen ● ●
Display of Hardware and Software Configuration ● ●
Graphic Function ● ●
Dynamic Graphic Display ○ ○
【Multi-language Display】English *14 ● ●
Other Language *15 ▲ ▲
Other Language *16 ○ ▲
Dynamic Display Language Switching ▲ ▲
【Data I/O】
RS-232C Interface for 1ch ○ ○
Data Server Function - ◎
External Message ● ●
External Workpiece Number Search ◎ ◎
Memory Card I/O ● ●
USB Memory I/O ● ●
● : Standard ○ : Optional ◎ : Special - : None▲ :Parameter setting is required.(Note: Normally, the parameters need not to be changed. If the parameters are to be set or changed, understand completely the functions of such parameters. Wrong setting could cause the machine to be moved unexpectedly, resulting in machine or workpiece damage or personal injury.)
CM : C-Axis/Milling standard specification. Tiwap : Tiwap-1 standard specification. CE : CE type standard specification. G : Gantry loader type standard specification.
*1) I/O addition and the PC change are necessary. *2) 0.001mm、 0.0001inch、 0.001deg(for CM type)*3) IS-C 0.0001mm 0.0001deg 0.00001inch.*4) Addition of switch is required.*5) Not coexistent with chuck tailstock barrier.*6) Not coexistent with Stored Stroke Check 2, 3.*7) Required when RAKU-RAKU Monitor 3 is used.*8) DNC run mode transfer switch is required.*9) CF card and adaptor is required.*10) Not coexistent with chamfering/corner R.*11) Not coexistent with drawing dimension direct input.*12) Tool setter is required.*13) Cannot be used when RAKU-RAKU Monitor 3 is installed.*14) Cannot be simultaneous display the other languages.*15) Japanese, Spanish, Chinese (traditional), Chinese (simplified), Portuguese,
Russian, Turkish, Hindi(8.4"display only), Vietnamese, Indonesian*16) German, French, Italian, Korean, Dutch, Danish, Swedish, Hungarian, Czech,
Polish, Romanian, Bulgarian, Slovak, Finnish*17) RS-232C Interface is required.*18) In the case of loader specification, about [ 262K-byte 655m ] is used for program
store capacity by RAKU-RAKU loader 4 software. *19) In the case of loader specification, the 150 program number is used by RAKU-
RAKU loader 4 software.
NC Unit Specifications
※ Please contact our sales persons for further information.
RAKU-RAKU Monitor 3
RAKU-RAKU Loader 4
Measurement Monitor 3▲ RAKU-RAKU Loader 3
▲ RAKU-RAKU Monitor 3
This function loads the measured data from a measuring unit and sets automatically
the offset value. Also, various convenient functions such as graphical display, Cp
(process capability) calculation, and data input/output are included.
【Optional Accessories】
The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract.The contents of the catalog are subject to change for improvement without notice. Please make confirmation from our sales representatives when entering into the contract. 1817
*The appearance, specifications, and relevant software of the product are subject to change for improvement without notice.
*Please make an inquiry to our sales representatives for details of the product.
TAKISAWA MACHINE TOOL CO., LTD.983 Natsukawa, Kita-ku, Okayama 701-0164, JAPANTelephone : (81)86-293-1500Fax : (81)86-293-5799Website : http://www.takisawa.co.jpE-mail : [email protected] (America)
[email protected] (Europe)[email protected] (Asia)
■ Overseas NetworkTHAILAND Takisawa (Thailand) Co.,Ltd.
Telephone : (66)2-012-1530-2 Fax : (66)2-012-1533
INDONESIA PT. Takisawa IndonesiaTelephone : (62)21-45852466 Fax : (62)21-45852467
INDIA SAP Takisawa Machine Tools Private Ltd.Telephone : (91)80-26662386 Fax : (91)80-26662392
CHINA Takisawa (Shanghai) Co., Ltd.Telephone : (86)21-6235-0938 Fax : (86)21-6235-0905
USA Takisawa, Inc. Telephone : (1)847-419-0046 Fax : (1)847-419-0043
GERMANY Takisawa Machine Tool Germany Representative OfficeTelephone : (49)2056-2598-15 Fax : (49)2056-5994-79
Japanese laws prohibit this machine from being used to develop or manufacture “weapons of mass destruction” or “conventional arms”, as well as from being used to process parts for them.Export of the product may require the permission of governmental authorities of the country from where the product is exported.Should you wish to resell, transfer or export the product, please notify Takisawa Machine Tool Co., Ltd. or our distributor in advance.
NC526E1610EN2000C
(Head Office)
CM007ISO 14001 12ER-865
(Head Office)
ISO 9001 CertifiedJQA-2010