CMS User's Manual(V6.0)

8/10/2019 CMS User's Manual(V6.0)

http://slidepdf.com/reader/full/cms-users-manualv60 1/32

Chapter 1 Software Instruction

1.1 Summary

This is a Central Control Software with powerful function and Distributed Architecture,integrate many

windows,users,languages,bidrectional Talk,video conference,Classic of electronic map,alarm center,be compatible

with Other extended products and single directly connected devices surveillance system as one This software is only for connecting different devices !D"#,D"S etc$,the manual only descrip the software,for

specific e%uipment features,pls refer to related product manuals

1.2 Features

1.2.1 User and Authority management.

Support & level organi'ation management,user management and authority setup

1.2.2 Data interface technology adopted.

All datas adopt data interface technology,so it can support every database si'es very (lexibility,such as

S)*,+S)*,-+* data and so on

1.2.3 Support !C" edit to add de#ice.

The platform support the user adopt .xcel to add and edit devices,it/s very convenience for user to maintain

%uantities of devices,improve system/s useability and greatly reduce many works for maintenance

1.2.$ Intelligent %ideo &ransport 'rotocol.

0ntelligent "ideo Transport 1rotocol can do +aximi'e the use of network bandwidth,especially on the condition of

(ront2end network bandwidth limited,when to assure system based on high %uality 0mage in very low network

bandwidth,it can work well

1.2.( Scala)le distri)uted networ* architecture.

Support multi servers running Coordinated,0ntelligent load balancing,(lexibility to add server and .nhance the

system capacity .ffectively on the condition of 0ntegrity assurance

1.2.+ 'erfect #ideo monitoring.

3hile real time monitoring,system support alarm,recording,auto monitoring record,playback and so on,it can

exactly control each channel recording status

1.2., Dynamic regulation decoding )uffer.

(lexibility in ad4usting the (luency5real2time of video images when real time monitoring which can meet different

users need

1.2.- Adopting shelf technology

+odular Development and flexibly assembled applications

1.2. Central management.

Centrali'ed management of data throughout the system and (orwarding of data to provide the perfect multi2user

real2time monitoring program#emote users can real time monitor,record and playback through network

1.2.1/ asy operation

0n access control,6sers can easily control and set each monitor point through the system,it also could integrates

.2map

1.2.11 0igh integration le#el

The system integrates other related informations,like Alarm and "oice etc

1.2.12 0igh relia)ility

The system designs a special (ault tolerance measures to assure data 0ntegrity and system runing

dependability



1.2.13 ood scala)ility

The system designs for Service,has good Scalability and Adaptability to maximumly protect user investment

1.2.1$ Support etwor* management and load )alancing.

1.2.1( Support multi de#ices upgrade #olumely #ia networ*.

1.2.1+ Support User DI interface and multi languages.

1.2.1, Support $ channels real time play)ac*.1.2.1- Support connecting multi de#ices and #iew many #ideos4real time monitoring and play)ac*5

1.2.1 !6" data storage



Chapter 2 Installation instruction

2.1 n#iroment re7uest of running

2.1.1 0ardware.

C16 17589:

:raphics must support hardware scaling!such as AT0,T&T8 and 1#O,but suggest AT0;<99 or above,dualchannels,+emory!over =8<+$5=8<bit

&ote> it needs good configuration for memory,graphics and C16 0f many screens need to be decompressioned

&etcard>=995=999+

2.1.2 Software.

This C+S can run under "ista,3inxp,3in8999,3in899? and 3in899@,it/s not suggestion for windows ;<

1ls close all Antivirus Software and firewalk so that it can write running program correctly and completely in the

control center before installing the software,or it will not search any devices

2.2 Installation step

2.2.1 Find 8C6S9Chnng9%1././.+.&.2///31(.:e8 in the CD and run it li*e )elow pic.

2.2.2 Clic* 8e:t8;then go the )elow pic.



2.2.3 Clic* 8<rowser8 to select setup path4default path 8C=>'rogram Files85;then clic* 8e:t8 to selectStart 6enu folder li*e )elow pic.



2.2.$ Clic* 8e:t8 to start setup and end setup li*e )elow pic.

2.2.( Clic* 8Finish8 to end the setup;at the time it will come up this icon in the des*top

'ls follow Chapter 3;$;( instructions to operate this software after finish installation.



Chapter 3 Introduction of )asic functions

3.1 C6S ?peration 6ain 6enu

3.1.1 De#ice display area

0n this area,you can preview live screens by device and super account administrator setting,click device name or

channel group to change channes

3.1.2 ?peration area

ou can preview live screens ,and setup parameters when system configuration and video searching in this

area

3.1.3 &ime

3.1.$ %ideo dis* status area

0t can display the rest disk spaces where video files store

3.1.( '&@

3.1.+ ?peration log

0t will display any operation informations when setup and operating

3.1., 6enu Area

6sers could set single menu and sub2menu in this area,select relevant menus to opearte video surveillancesystem in the control center

Diagram 1 6enu Configuration

o. First6enu

Second6enu

&hird6enu

Function Instruction ?peratingright

= 1review Click preview button +onitor to choose a previewof the screen,touring B switching among allchannels and snapshot pictures of the screen Shupdown5open preview menu

Admin56ser

8 1T Controling the speed cameras to goup,down,left,right and stop by operatingpanel,ad4usting speed,'oom,focus,iris and auto pan,

preseting and touring

Admin56ser



o. First6enu

Second6enu

&hird6enu

Function Instruction ?peratingright

? Color Set brightness,contrast,saturation and hue for videoscreen

Admin56ser

7 System Devicemanager

Add 'one Add 'one for all devices Admin56ser

Adddevice

Add video surveillance devices Admin56ser

+odify +odify device name,ip address,user name andpassword

Admin56ser

E Delete Delete video surveillance devices Admin56ser @ *ocal

ConfigFaseconfig

Select disk,disk list and logs maintenance Admin56ser

< Alarmsetting

.nable audio activated by alarm Admin56ser

; Account :roup Add and delete users/ operating rights Admin=9 6ser Add,delete and manage users>

Set user name,password and operating rights of menu

Admin

== *ocal*og

Search alarm log and operation log in set time area Admin56ser

=8 #ecord 1layback Search record file and playback Admin56ser =? #ecord

1lanSet record time for every day Admin56ser

=7 Advance Decoder Set D"# and decoder Admin56ser = +ap 6sing this map,it can visually show every cameras

location and find current monitoring page directly Admin56ser



Chapter $ 6onitor

0n the menu area,click +onitor,it will turn to preview screen+onitor functions> 1review,1T and video specification configuration

$.1 're#iew

Diagram 8 (unctions and instructions of preview

&o Futton +eanings= click it to preview full screen for every channel

8 click it to preview 7 screens

? click it to preview ; screens

7 click it to preview =E screens

click it to preview 8 screens

E click it to preview ?E screens

@ click to to preview E7 screens

@ click it to enter full screen interface

$.2 Bightclic* 6enu At operating area,user can do below operation by right2click>

Close window> close the current screen

Close all window> close all the current screens

Audio> click it and hear the voices from preset screens

*ocal record> click it to record at current channel and save the record at the relevant disk

Snapshot> Capture pictures from current channel at any time and save it to relevant disk

Device config> click it and go to device configuration interface

$.3 '&@ Control

3hen speed cameras are connected with D"#,user can control it at this center,turn up,down,left and right,stop

running,ad4ust turning speed,'oom,focus and iris,preset and tour configuration3hen user enable touring function,the

speed cameras will tour according to preset

(unction>



&o Futton +eanings=

means turn, means stop turning

8 Drag this pole to ad4ust speed rate

?Click to 'oom inGClick to 'oom out

7Click to focus inGClick to focus out

Click to iris itGClick to iris out

E

@ Set a location for the preset, calls the preset points, 1T automatically

turns to the setting position,add,delete and config preset point

< +ultiple preset points connected tour lines, call touring between points, the

1T run around on the line

$.$ Color

&o Futton +eanings= Frightness

8 Contrast

? Saturation

7 Hue

1icture 72? Color

ote= Clic* to resume 0nitial values

Chapter ( System(.1 De#ice manager

(.1.1 Clic* to add one;see )elow=



(.1.2 Clic* to add de#ice;see )elow picture=

Device &ame> Device name

Domain> Domain name by external network such as xxxx??88orgG xxxxdyndnsorgG xxxxorayorg etc

01 Address> 01 address

1ort> TC1 port

6ser &ame> 6ser name

1assword> 1assword

Click OI after you have done above parameters,see below picture,you could only doubleclick to open thisdevice

&ote> Choose only one of Domain name and 01 address

(.1.3 Clic* to modify de#ice;see )elow picture=



After finishing all the modifications,click OI

(.1.$ Delete de#ice

Choose the devices which you want to delete,then click

&ote> 1lease make sure the device is disconnected before modifying and deleteing it

(.2 "ocal De#ice

(.2.1 <ase Config

See below picture>



Overwrite> Click it,then it will cover the old records when HDD is full

*ength> Time length for = record file

Disk *ist> C,D,.,(

*og +aintence> Alarm and Operation log keep days

1icture D0#> 1icture storage location by snapshot

#ecord D0#> #ecord storage location by local recordingSync time with 1C> Ad4usting device and 1C in order to make both at the same time

"ersion 0nfo> C+S/s vertion!video,net,decoder,playback and device config$

*anguage> Choose language for C+S

(.2.2 Alarm setting

Device list> Choose = device to set alarms

Alarm .nable> Click it to make sure all alarm functions available

Alarm 1rompt Sound> Select any alarm prompt sound which you like

Sound (ile 1ath> Frowse and choose prompt sound

Auto 3atch 3arn> Choose it to add following channels by alarm activated

&ote> 1lease go to choose alarm type first

(.3 Bemote Config

Select a device first,then set its configurations,see below picture>



(.3.1 Becord= Click to go into record interface

Set record length,period,type etcsee below picture>



Snapshot Storage= Set presnapshot,snapshot type and period,see below picture>

(.3.2 Alarm= Click to go into alarm configuration,see below picture



Alarm activation configuration!motion detect,video blind,video loss and alarm in$,see below picture

(.3.3 System

Click to go into system set interface,see below picture



eneral=Set system time,language,video standard,D"# &o,auto logout and so on,see below picture

ncode= Set dvr specifications of resolution,(1S,video %uality etcsee below picture



etwor*= Set 01 address,port,D&S etcin order to remote monitor by network and mobile,see below picture>

etSer#ice= Set 01 filter,DD&S,.mail etcsee below picture



CA6 ame= Add or modify camera name by your need,see below picture

'&@ config= Set 1T parameters to make sure the same as speed cameras



BS232= Set #S8?8 port configurations,see below picture

Ad#anced= Click to go into advanced interface,see below picture



0DD manage

Account= +odify 6ser,group,password,add user,group etcsee below picture>

Auto6aintain= Set Auto2#eboot time and files management,see below picture



Default= #estore to factory settings

Info. Click to go into system info interface,see below picture>



0n system info,there are HDD info,*O: and "ersion

Chapter + Account

+.1 roup

AddBdelete group and set group right,see below picture>

+.2 User

AddBdelete user and modify password



Chapter , "ocal "og

6ser could search menu operation log,alarm log and other logs by time,see below picture



Chapter - Becord

-.1 'lay)ac*

There are 8 playback modes222#emote playback and *ocal playback

#emote playback> 1layback at Device2side

*ocal playback> 1layback at Client2side6ser could playback record files of any times,max playback channels are 7

<utton instruction

&o Futton +eanings= 1lay

8 1ause

? Stop

7 Slow play

(ast play

E *ast frame

@ &ext frame

-.2 Downlaod <ac*up

6ser could playback record files at set time and channels,select record fines,click Download5Fackup and select

save directory



ote= #emote playback2222Download

*ocal playback222Fackup

-.3 Becord plan= Set your record plan on any clocks and days,see below picture>

.dit Template,see below picture>



After set name,then click add and OI

Choose channel first,then go to set record time from +onday to Sunday

ote= After set record plan,0f it need to record,please make sure the below ? points>

=Choose disk for recording at *ocal config

8 +ake sure the device is connected to network

? +ake sure local computer is always open



Chapter Ad#anced

0t contain two options222Decoder and +ap

.1 Decoder

0t can manage and config remote decoder very easy,see below picture>

.1.1 Add decoder #ight2click to add decoder,see below picture>

Device &ame> &ame of decoder,it/s set by yourself



Domain> Domain name of decoder

01 address> 01 address of decoder

1ort> TC1 port,default is ?7E@

6ser &ame> *ogin name of decoder,default is admin

1assword> 1assword of decoder

After you add decoder successfully,it will come out a decoder ico in this interface,right2click this ico to edit,delete

and set attribute

.1.2 dit#ight2click decoder ico to edit decoder,see below pictures>

.1.3 Set decoder Attri)ute

#ight2click to click Attribute,see below picture>



0n the device list of left side,select = camera,then select = camera of right side,at last click Add in the center,for

example>

See above picture,

Decoder CA+9= decode output for home2CA+8

Decoder CA+98 decode output for bank2CA+=

Decoder CA+9? decode output for supermarket2CA+=

Decoder CA+97 decoder output for car park2CA+7

Delete decoder

#ight2click to delete decoder

.2 6A' .2+A1 is a plan for simulating live screen,user can use it to add B delete cameras and set e2map alarm

activation,see below picture>



=Click .dit first at the left bottom,then click 1icture .idt,see below picture>

8Click Add to add picture,see below picture>

?After set picture name,description,picture path,then click OI back to main interface

Click 1icture and drag = picture to the right side,see below picture>



7Click Device to drag device/s channel to the map,then the channel name will appear at the map,double2click it

to name and describe it

Appendi: A A))re#iations

A))re#iation Full name Chinese meaning

C+S center manager system 网络视频控制中心

D"S Digital "ideo System 数字视频监控系统

1T 1an5Tilt5oom 云台设备

TC1501 Transmission Control 1rotocol 5 0nternet1rotocol

传输控制协议5互联网协议



Appendi: < 6ain parameters

"ideo Compression H8E7 main profile

Audio Compression :@==A

"ideo #esolution ;E9H5D=5HD=5C0(5)C0(

Displayresolution

#esolution &TSC ;E9-7<9

1A* ;E9-@E

#ate &TSC ?9(1S

1A* 8(1S

(rame rate ?958!&TSC51A*$ (5S

"ideo input F&C input

Audio input #CA input

Type of compressed code Combine code

#ate of compressed code ?8kbps J 897<kbps!ad4ustable$

&etwork 1rocotol TC1501,static 01 , DHC1 , 111o.

&et 0nterface =95=99+ #K7

1T procotol 1elco215 1elco2D5 +inking5 *inlin5 &eon5 Star5 "idoetc

#emote +onitor 0. browse,C+S and +obile

Documents

CMS User's Manual(V6.0)