CMS Ducting Products v2

SYDNEY (02) 8814 8133 MELBOURNE (03) 9768 4833 BRISBANE (07) 3209 7299 PERTH (08) 9209 1166 NEW ZEALAND (09) 582 0776 www.cmselectra.com


ORDERING INFORMATIONORDERING INFORMATIONORDERING INFORMATIONORDERING INFORMATION

PART NO. DESCRIPTION

SPT06AN 670mm Power pole anodised finish c/w floor and desk mounting bracket and cover

SPT21AN 2.1m desk to ceiling power pole anodised finish c/w ceiling kit, under desk mounting bracket,

desk grommet and cover

SPT28AN 2.8m Power pole anodised finish c/w ceiling Kit, floor bracket and cover

SPT33AN 3.3m Power pole anodised finish c/w ceiling kit, floor bracket and cover

SPTFB Floor mounting bracket

AXC Ceiling flange

AXCD Floor access grommet

SPTDB Under desk mounting bracket

SPTLID02 200mm Pre cut cover

SPTB28 2.8m Brush strip

OTHER LENGTHS AVAILABLE UPON REQUEST

TOTEM POWER POLE

This stylish new round Totem pole is a simple

cable protection solution specifically designed

for bringing power and data cables from the

floor, ceiling or the workstation.

The Totem by CMS includes an access floor

mounting kit and a dividing plate creating two

compartments to retain segregation between

services.

Available with access door or brush strips.

Brush Strip Segregation plate Access door

SOME OF THE FEATURES INCLUDE:

- Unique profile

- Available in 670mm, 2.1m, 2.8m and 3.3m

- Floor and desk mounting kit included

- Segregation plate included

- Stylish anodised finish

1


POWER POLE

- Unique profile

- Available in 670mm, 2.1m, 2.8m and 3.3m

- Floor and desk mounting kit included

- Segregation conduit included



SPA002

SPA101

SPA003

SPAL200

SPA005

POWER POLE ORDERING INFORMATION


SPA28 2.8m Power Pole Anodised finish c/w Ceiling Kit, Floor Bracket, Cover and 3 x Service Mounting boxes

SPA33 3.3m Power Pole Anodised finish c/w Ceiling Kit, Floor Bracket, Cover and 3 x Service Mounting boxes

SPA101 Service Mounting Box

SPA002 ‘T’ Bar Mounting kit

SPA003 Floor Mounting Bracket

SPA005 Ceiling Flange - White

SPAL200 200mm Pre cut cover


2b


ORDERING INFORMATION


CPT2CF 2800mm Ceiling to floor Power pole anodised finish c/w ceiling kit, floor bracket and cover

CPT2CW 2100mm Ceiling to workstation power pole anodised finish c/w ceiling kit, desk flange and cover

CPT2FD 720mm Floor to workstation power pole anodised finish c/w floor bracket, cover, under desk mounting

bracket

CPT2-02U 300mm Power pole anodised finish, desk flange mount c/w 2 x Auto switch GPO and USB

CPT2FS 900mm Free standing power pole anodised finish c/w floor bracket and cover

CPT2B Floor mounting bracket including shroud

CPT2C Ceiling flange

CPT2D Under desk mounting bracket


CENTRE POINT SERIES II

The stylish new round Centre Point Series II Power Pole by

CMS provides power, data and USB solutions to the

workplace, all in one modern anodised pole.

Apart from supplying power, data and USB accessibility

the Centre Point Series II Power Pole allows for the

reticulation of cable from the ceiling or floor to the

workstation.

Various configurations are available with the Centre Point

Series II, giving you flexibility and design possibilities for

your office space.


- Unique profile

- Available in 300mm, 720mm, 900mm, 2100mm and 2800mm

- Floor and desk mounting kit included on applicable models

- Continuous segregation barrier


- Customisation available upon request Desk Mount Freestanding Power Pole

Note: - Outlets sold separately except for 300mm desk mount option

- Anodised finish as standard (other colours P.O.A)

3 11.8.14


4 15.9.14

FLUSH FLOOR TRUNKING

PLATE ACCESSORIES H PART NO.

Cross 70 FF33570C

Leveling & Joiner FF33570LP

Tee 70 FF33570T

90º Bend 70 FF33570B

Junction box 70 FF335705JB

THE TRUNKING MUST BE INSTALLED ON A FLAT SOLID SURFACE, PREFERABLY WITH A

MINIMUM RIBBON SCREED THICKNESS OF 10MM AND SET FLUSH IN THE SCREED

BASE TRUNKING PART NO.

1200mm x 335 x 70 FF33570

Base trunking

Junction boxes

Levelling/joiner plate * Special sizes available upon request

Cross fitting

‘T’ fitting

Bend fitting

335

300

1200

300

335

400

150

300 300

335 335

335

300

500

300

300

300

417.5

417.5

70

* * * * Note: Junction box comes with 4 x GPO’s, 1 x L3.20 Rewireable

connector, 4 x Provision for data, 1 x Apollo series 4 compartment

floor box lid.


5 15.9.14

SCREED TRUNKING

Special Features:Special Features:Special Features:Special Features: - Simple to install

- Sturdy construction

- 2mm thick steel trunking

- 2 compartment floorbox

- Moulded carpet trim

JUNCTION BOX:JUNCTION BOX:JUNCTION BOX:JUNCTION BOX: - Die cast lid for maximum strength

- Adjustable height for easy levelling

* This product is made to order

* Special sizes upon request

BASE TRUNKING H PART NO.

Standard 28 ST20028

Large capacity 38 ST20038

Base Trunking

Junction Boxes

Carpet trim for Junction box

JUNCTION BOX TYPE PART NO.

Crossover Adjustable ST20138

Elbow Adjustable ST20238

THE SUPERLIM JUNCTION BOXES HAVE BEEN SPECIFICALLY DESIGNED TO BE USED

WITH THE SUPERSLIM 23MM TRUNKING. FLOORBOXES CANNOT BE USED WITH THIS

SYSTEM. USE SUPERSLIM SINGLE OUTLET

Straight/Floor box Adjustable ST20338

h = Adjustable height range 60 to 85mm


6 15.9.14

COUPLER H PART NO.

Superslim 23 ST20523

Standard 28 ST20528


END CAP H PART NO.


Standard 28 ST20628


VERTICAL BEND H PART NO.


Standard 28 ST20728


3 COMPARTMENT FLOOR BOX

(EMPTY) PART NO.

N/A ST20400

USE IN CONJUNCTION WITH THE ADJUSTABLE JUNCTION BOXES ST20338.

FLOORBOXES ARE SUPPLIED WITH ALL FIXINGS AND EDGE TRIMMINGS.

ACCESSORY MOUNTING PLATES MUST BE ORDERED SEPARATELY.

SINGLE OUTLETS PART NO.

Steel blank CL58186

USE IN CONJUNCTION WITH THE ADJUSTABLE JUNCTION BOXES ST20338.

FLOORBOXES ARE SUPPLIED WITH ALL FIXINGS AND EDGE TRIMMINGS.

ACCESSORY MOUNTING PLATES MUST BE ORDERED SEPARATELY.

Dome lid CL1075GRY

Plastic blank CL1575GRY


7 15.9.14

OUTLET BODY

FOR IN-SCREED H PART NO.

Standard 30-45 ST100

Superslim 26-40 ST50

HEIGHT ADJUSTMENT ABOVE TRUNKING

SINGLE OUTLET BOX FOR

CONDUIT INSTALLATION PART NO.

N/A ST200

KNOCKOUTS: 23MM

HEIGHT ADJUSTMENT: 60 TO 75MM

USE SINGLE OUTLET 24MM SPACERS (PART NO. CL55528) FOR THICKER SCREED

SPACER PART NO.

24mm Spacer CL55528

ACCESSORY PLATES PART NO.

1 Gang S.O CL10021

Punched for LJ CL20021

Blank plate CL30021

Hole cutters and template data sheets are available

from Ackermann on request.


8 15.9.14

Notes:

- Standard colours are Anodised or Black

- **Denotes colour: AN (anodised), BK (black)

- Covers also available in Grey (GY) these can be used with anodised duct body for contrast

Our new stylish skirting duct range is a simple

solution of distributing power, data &

communication around the entire workspace.

Our skirting duct comes with all the

accessories you will need for an easy

installation.


- Available in two channels

- Easy installation

- Standard colours are natural anodised or

black. Other colours upon request, price on

application

- Accommodates standard bakelite with 84mm

centres fixing holes

SKIRTING DUCT ORDERING INFORMATION


SK35D** Skirting Duct 150mm x 35mm - 2.4m lengths

SKC** Skirting Cover 150mm high - 1.2m lengths (suits 35mm & 50mm deep)

SK35E** 35mm SK End cap

SK35I** 35mm SK Internal Cnr

SK35X** 35mm SK External Cnr

SKGPO Accessory box suit wall duct with spring clip & aluminum cover plate

SK50D** Skirting Duct 150mm x 50mm - 2.4m lengths

SK50E** 50mm SK End Cap

SK50I** 50mm SK Internal Cnr

SK50X** 50mm SK External Cnr

SKGPO Accessory box suit wall duct with spring clip & aluminum cover plate

SKIRTING DUCT

Extruded aluminium

External cap

Double power

outlet CMS Starter

Internal corner

Accessory box

End cap

Skirting duct (outlets sold separately)

Documents

CMS Ducting Products v2