7/27/2019 CM3000 7.7.0.0059 SP3 release note

1/2

CM3000 V7.7.0.0059 (SP3) Release Note

2010/5/18

[System Requirements]

1-64 DVRs System 65-150 DVRs System Above 150 DVRs System

CPU Intel P4 3.0GHz or

above

Core2Duo E82 2.66Ghz or

above

Core2Duo E82 2.66Ghz or

above

Mother Board Intel 865 chipset or

above

Intel 955 / 965 / 975 / P31 /

P35 chipset

Intel 955 / 965 / 975 / P31 /

P35 chipset

RAM 1 GB 2 GB 4 GB

Graphic Card 16-bit high color SVGA

graphic card with Direct

Draw & YUV Rendering

capability, 256MB video

memory at least

16-bit high color SVGA

graphic card with Direct

Draw & YUV Rendering

capability, 256MB video

memory at least

16-bit high color SVGA graphic

card with Direct Draw & YUV

Rendering capability, 512MB

video memory at least

HDD 80GB per partition 120GB per partition 120GB per partition

Ethernet 10/100Mbps LAN Gigabit LAN Gigabit LAN

[System Language]

Support English, Japanese, Traditional Chinese, Simplified Chinese, Arabic, Bulgarian,

Czech, Danish, Dutch, Finnish, French, German, Greek, Hebrew, Hungarian, Italian,

Norwegian, Polish, Portuguese, Romanian, Russian, Slovak, Spanish, Swedish, Thai,

Turkish

[New Feature]

1. Support AverDiGi System Controller Pro (The firmware version of System controller Pro:

0.52)

- USB mode

- RS485 mode

2. Support Hebrew

[Improvements]

1. Modify possible remote auto backup error

2. Modify possible camera name displaying error in Monitor

3. Modify possible remote backup error in EXR6004 Mini

[Limitations]

7/27/2019 CM3000 7.7.0.0059 SP3 release note

2/2

1. Center and E-map are not allowed to be displayed on the same monitor in a multiple

monitor environment

2. Audio from EXR/EH series is only available when live monitoring in Monitor mode

3. The usage of the System controller Pro in RS485 mode is only supported when

connecting to the CM3000 via RS485 or RS485TORS232 connector.

[How to set up 4 monitors]

CM3000 supports a 4 monitor display-mode. Make sure to use a motherboard whichsupports the usage of 2 VGA cards (assure to apply the same brand/ model of VGA cards).

This type of VGA card usually comes with two output-connectors (one Analog and one DVIoutput) - both outputs have to be connected to one physical monitor (the video-cardpackage usually contains a DVI to VGA converter for the second output). The currently

successfully tested mother boards for this application are ASUS (P5ND2-SLI Deluxe, P5BDeluxe, P5KR) and Gigabyte (GA-965P-DS3P). Therefore we suggest the user to run

CM3000 on an ASUS or Gigabyte motherboard (SLI series), which supports the usage ofdual VGA cards. Make sure, when using a 4 monitor-system, to configure monitor 1 tomonitor 4 from left to right and avoid a vice-versa configuration.

AVerMedia INFORMATION, Inc.