Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
PRO-10™ SERIESCABLE TRAY SYSTEMS CATALOG
CM20
Accessories
Mounting Supports
CM10
2
Introduction
Features
Benefits
Structure
CM20 Products
CM10 Products
Mounting Supports & Hardware Kits
Accessories
PRO-Hanger Ceiling Suspension
CM20 & CM10 Load & Fill Charts
Installation Instructions
Pro10 ZF
Eco-Friendly Material
M.E.2
Liteguards
Wiremaid
Table of Contents
3
4
5
6-7
8-9
10-11
12-13
14
15
16
17
18
19
20-21
22
23
WIREMAID™, PRO-10™, CABLE-MGR® and M.E. 2™ are trademarks of Vutec Corporation. UL and UL Classified are certification marks of Underwriters Laboratories Inc.
(800) 770.4700 | WireMaidUSA.com | [email protected] 3
CM20 & CM10 The "Easy-to-Connect One Tool" Cable Tray System
PRO-10 CM20's complete line of factory built turns and fittings that creates a 100% NEC Compliant Cable Tray System maintains 100% UL® Classification. PRO-10's built-in splice is also UL classified for bonding and grounding, assuring the job is done right the first time, every time. The patented one-tool system reduces installation time by 50% or more and adapts to the most difficult installations.
About Wiremaid™ & Cable-MGR®
Since 1950, Wiremaid™ has designed and manufactured wire productsfor commerce and industry. WIREMAID is the leader in the design and manufacture of wire mesh cable trays branded CABLE-MGR® as well assafety guards for lighting fixtures, equipment, etc. Wiremaids products are manufactured in the USA using eco-friendly recyclable materials.
WIREMAID's product line is designed for ease of installation, safety and value. Dedicated to service and excellence in workmanship, WIREMAID continually strives to be at the vanguard of its industry.
ALL YOU NEEDIS ONE TOOL!
M.E.2™
The Standard Cost-Effective SystemThe M.E. 2 cable management system is manufactured with rigid Ø.187 powder coat steel wire, welded in a 2" x 4" grid. M.E. 2 cable trays are available in 7' or 10' lengths that can be cut to length and can be configured at the installation site. Straight tray sections are easy to handle, 2 inch or 4 inch deep trays, available in 6", 8", 12", 18" and 24" widths, offer a variety of wire channel routing and protection options.
INTRODUCTION
4
FEATURES
PRO-10™ is available in wire diameter choices CM20 (Ø.187) and CM10(Ø.120) to accommodate various cable tray load capacities.
CM20 CABLE TRAY
• 2”x 4" Grid Pattern
• Standard for Commercial and Industrial Cabling Applications
• 7 Standard Powder Coated Color Finishes plus Custom Colors Available
• Available Widths: 2", 4", 6", 8", 12", 18", 24" or 36"
• Available Lengths: 1’, 2’, 5’, 8’ or 10’
• Available Depths: 2”, 4”, 6” or custom
CM10 CABLE TRAY
• 2”x 2” Grid Pattern and 1”x 4” Side Panels
• Lightweight Solution for Fiber Optic Cabling and Cable Management
• 7 Standard Powder Coated Color Finishes plus Custom Colors Available
• Available Widths: 2”, 4”, 6” or 8”
• Available Lengths: 1’, 2’ or 5'
• Available Depths: 2"or 4"
Wiremaid and PRO-10 are trademarks of Vutec Corporation, UL and UL Classified are certification marks of Underwriters Laboratories Inc.★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted, custom made and manufactured in America.
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted,custom made and manufactured in America.
(800) 770.4700 | CableMGR.com | [email protected] 5
• NO field cutting or bending required (eliminates waste)
• NO bonding jumpers required for NEC compliance
• Reduces installation time by 50% - 80%
• Eco-friendly recycled materials
• Acts as an equipment ground conductor (NEC 392.60)
• Protective powder coated colored finishes prevent corrosion
• Provides strength and rigidity without additional hardware
• Only one tool needed for a quick and easy install
• Maintains UL classification (CM20 only)
• UL bonding & splicing built-in (CM20 only)
• High loading capacity
• Adapts to difficult architectural design changes in direction
and elevation of cable runs
• U.S. patent No. 7,546,987
• A prefabricated tray for every need
BENEFITS
L FITTING
WATERFALL
STRAIGHT SECTION
6
Widths2"
4"
6"
8"
12"
18"
24"
36"
Lengths1', 2', 5', 8' or 10'
Custom sizes available
(800) 770.4700 | CableMGR.com | [email protected]
REDUCER
4-WAY (X)FITTING
45° FITTING
T FITTING
30° FITTING
ELEVATION CHANGE (EC)
BENEFITS OF PRO-10™
• Patented Design• 100% UL Classification (CM20 only)
• UL Bonding & Splicing Built-In (CM20 only)
• Available in Stainless Steel Contact Pointsand Hardware (PRO-10 ZFTM)
• Durable Powder Coat Finish• 100% Stainless Steel Available
7
StructurePRO-10 adapts to ANY difficultarchitectural design and layout to accommodate changes in direction and elevation.
STRUCTURE
• CM20, CM25 and CM29 are UL classified• All parts include interconnecting hardware• Check load & fill ratio chart (pg. 16) for requirements• Custom sizes and colors are available
8
Straight sections (Ø.187) have a grid pattern of 2” x 4” and are available in standard widths of 2", 4", 6”, 8”, 12”, 18”, 24” and 36”. Lengths can be ordered in 1’, 2’, 5’, 8’ and 10’ with a depth/height of either 2”, 4” or 6”.
Straight Sections (CM20) Reducer (CM29)Reducers are available in standard configurations with a depth/height of 2”, 4” or 6” (36”-24”, 24”-18”, 18”-12”, 12”- 8”, 8”- 6”, 6”-4” and 4”-2” are standard).
Custom Reducers are also available in any standard size to any standard size.
STRAIGHT SECTION
7 Powder-Coated Finishes
YELLOW - 1 WHITE - 2 CHROME - 3 BLACK - 4
ORANGE - 10RED - 5 BLUE - 6
Fitting Types (CM25)Pre-fabricated fittings (Ø.187) are available in standard widths of 2”, 4”, 8”, 12”, 18”, 24”, or 36”
and a depth/height of 2”, 4” or 6”.
Custom colors also available
4-WAY (X) FITTING
L FITTINGT FITTING45° FITTING
ELEVATION CHANGE (EC)
CM20 PRODUCTS
Need assistance with take-off’s? Contact our team to assist you to create your cable management
layout, drawing sets, bill of materials and submittals. BIM and
CAD files also available at www.cablemgr.com
Wiremaid and PRO-10 are trademarks of Vutec Corporation, UL and UL Classified are certification marks of Underwriters Laboratories Inc.
REDUCER
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted, custom made and manufactured in America.
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted,custom made and manufactured in America.
SPECIAL ORDER CUSTOM FITTINGS UPON REQUESTAny Angle, Fitting or Size
30° FITTING
(800) 770.4700 | CableMGR.com | [email protected]
05 - 20 3208 10 05 - 25 2218 T 05 - 29 112X08 4
Ordering our products is easy and designed to ensure you are ordering the correct sections to build your cable management system.
CatalogNumbering System
CM20 STRAIGHT SECTION CM25 FITTING TYPES CM29 REDUCERS
WIDTH6” = 068” = 08
12” = 1218” = 1824” = 2436” = 36
WIDTH6” = 068” = 08
12” = 1218” = 1824” = 2436” = 36
REDUCTION6”- 4” = 06X048”- 6” = 08X06
12”- 8” = 12X0818”-24” = 18X2424”-18” = 24X18
DEPTH2” = 024” = 046” = 06
DEPTH2” = 024” = 046” = 06
DEPTH2” = 024” = 046” = 06
LENGTH1’ = 012’ = 025’ = 058’ = 08
10’ = 10
FITTING TYPE30° Fitting = 3045° Fitting = 45
T Fitting = TL Fitting = L
4-Way Fitting = XElevation Change = EC
FINISHYellow = 1White = 2
Chrome = 3Black = 4
Red = 5Blue = 6
Orange = 10
FINISHYellow = 1White = 2
Chrome = 3Black = 4
Red = 5Blue = 6
Orange = 10
FINISHYellow = 1
White = 2Chrome = 3
Black = 4Red = 5Blue = 6
Orange = 10
9
10
• CM10, CM15 and CM19 are NOT UL classified• SHOULD NOT be used as an equipment grounding conductor
• This superior cable management support system for non-power
applications is utilized where a heavier cable tray is not needed
• All parts include interconnecting hardware
• Check load & fill ratio chart for requirements
• Custom sizes and colors are available
Straight sections (Ø.120) have a grid pattern of 2”x 2”. Designed to support cables or act as a tray separator. Sections are available in standard widths of 2”, 4”, 6", 8” and 12". Lengths can be ordered in 1’, 2 ’ and 5’ with a depth/height of either 2” or 4”.
Straight Sections (CM10) Reducer (CM19)
STRAIGHT SECTION
7 Powder-Coated Finishes
YELLOW - 1 WHITE - 2 CHROME - 3 BLACK - 4
ORANGE - 10RED - 5 BLUE - 6
Fitting Types (CM15)Pre-fabricated fittings (Ø.120) have a grid pattern of 2”x 2” and are available in standard widths of 2”, 4”, 6”, 8” or 12”
and a depth/height of 2” or 4”.
Custom colors also available
CM10 PRODUCTS
Wiremaid and PRO-10 are trademarks of Vutec Corporation, UL and UL Classified are certification marks of Underwriters Laboratories Inc.
Reducers (Ø.120) are available in standard configurations with a grid pattern of 2”x 2” and a depth/height of 2” or 4”.
Custom Reducers are also available in any standard size to any standard size. REDUCER
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted, custom made and manufactured in America.
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted,custom made and manufactured in America.
4-WAY (X) FITTING
L FITTINGT FITTING45° FITTING
ELEVATION CHANGE (EC)
SPECIAL ORDER CUSTOM FITTINGS UPON REQUESTAny Angle, Fitting or Size
30° FITTING
(800) 770.4700 | CableMGR.com | [email protected] 11
05 - 10 1208 5 05 - 15 10208 T 05 - 19 112X08 4
WIDTH6” = 068” = 08
12” = 12
WIDTH6” = 068” = 08
12” = 12
REDUCTION6”- 4” = 06X048”- 6” = 08X06
12”- 8” = 12X08
DEPTH2” = 024” = 04
DEPTH2” = 024” = 04
DEPTH2” = 024” = 04
LENGTH1’ = 012’ = 025’ = 05
FITTING TYPE30° Fitting = 3045° Fitting = 45
T Fitting = TL Fitting = L
4-Way Fitting = XElevation Change = EC
FINISHYellow = 1
White = 2Chrome = 3
Black = 4Red = 5Blue = 6
Orange = 10
FINISHYellow = 1White = 2
Chrome = 3Black = 4
Red = 5Blue = 6
Orange = 10
FINISHYellow = 1
White = 2Chrome = 3
Black = 4Red = 5Blue = 6
Orange = 10
CM10 STRAIGHT SECTION CM15 FITTING TYPES CM19 REDUCERS
Ordering our products is easy and designed to ensure you are ordering the correct sections to build your cable management system.
CatalogNumbering System
Wiremaid and PRO-10 are trademarks of Vutec Corporation, UL and UL Classified are certification marks of Underwriters Laboratories Inc.12
Ø.250
Ø.250**4” height
Ø.250
.25" ROD P/N WIDTH05-5002-X 2”05-5004-X 4”05-5006-X 6”05-5008-X 8”05-5012-X 12”05-5018-X *18”05-5024-X *24”05-5036-X *36”
P/N WIDTH05-5602-X 2”05-5604-X 4”05-5606-X 6”05-5608-X 8”05-5612-X 12”05-5618-X *18”05-5624-X *24”05-5636-X *36”
05-CM74-X INCLUDES:(2) Angle Supports(2) "U" Clamps
.375" ROD P/N WIDTH05-5102-X 2”05-5104-X 4”05-5106-X 6”05-5108-X 8”05-5112-X 12”05-5118-X *18”05-5124-X *24"05-5136-X *36"
.25" ROD P/N WIDTH05-5204-X 4”05-5206-X 6”05-5208-X 8”05-5212-X 12”05-5218-X *18”05-5224-X *24”05-5236-X *36”
.375" ROD P/N WIDTH05-5304-X 4”05-5306-X 6”05-5308-X 8”05-5312-X 12”05-5318-X *18”05-5324-X *24"05-5336-X *36"
* 18" & larger are built from heavy duty framingstrut to accommodate heavier loads
Clamps fit up to a 1-1/2" dia. Pedestal
** other heights available
* 18" & larger are built from heavy duty framingstrut to accommodate heavier loads
CM50xx-x ¼” Kit Includes:• (1) support bracket• (1) hold down bracket
• (2) ¼” flat washers
• (2) ¼” nuts• (1) 6” protective tubes.
*Threaded Rod not included.
CM52xx-x ¼” Kit Includes:• (1) support bracket• (1) hold down bracket
• (2) ¼” finned nuts
• (4) ¼” flat washers
• (4) ¼” nuts.*Threaded Rod not included.
CM51xx-x ⅜” Kit Includes:• (1) support bracket• (1) hold down bracket
• (2) ⅜” flat washers
• (2) ⅜” nuts• (1) 6” protective tubes.
*Threaded Rod not included.
CM53xx-x ⅜” Kit Includes:• (1) support bracket• (1) hold down bracket
• (2) ⅜” finned nuts
• (4) ⅜” flat washers.
• (4) ⅜” nuts.*Threaded Rod not included.
Center Support Kit Trapeze Support Kit
UNDER FLOORMOUNT SUPPORT
PEDESTAL ANGLESUPPORT
Ø.250
P/N WIDTH05-5702-X 2”05-5704-X 4"05-5706-X 6”05-5708-X 8”05-5712-X 12”05-5718-X *18”05-5724-X *24”05-5736-X *36”
"L" P/N WIDTH05-CM18-04201 6”05-CM18-04202 8”05-CM18-04205 12”
"C" P/N WIDTH05-CM24-04201 6”05-CM24-04202 8”05-CM24-04205 12”
* 18" & larger are built from heavy dutyframing strut to accommodate heavier loads
WALLMOUNT SUPPORT
CABLE TRAYSUPPORT
“L Support” “C Support”
MOUNTING SUPPORTS& HARDWARE KITS
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted, custom made and manufactured in America.
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted,custom made and manufactured in America.
*All Pro10 Supports include a Hold Down Bracket
(800) 770.4700 | CableMGR.com | [email protected]
• Splice Washer Assembly, 4 per plate included• Available in easy to handle 59” lengths• Fits cable trays 6, 8, 12, 18, 24 and 36 inches wide• Powder coated to provide smooth protective surface for cable
pulling• Can be supplied pre-assembled to cable trays or installed in
the field
#05-2-500983 for a 2” deep tray#05-2-500984 for a 4” deep trayDividers are made from powder coated steel and are 5’ long.(Two Splice Washer Assembly Kits #05-2-500985 used to secure to each tray section included.)
#05-CM75-3 Kit Includes:(1) Bridge Support(2) “U” ClampsSpans 24-inch center to center floor pedestals up to a 1-1/2” diameterAll connection hardware is included for each tray section and no need to order separately.
P/N SIZE (WXL)05-2-06BP 6" x 59”
05-2-08BP 8" X 59”
05-2-12BP 12" X 59”
05-2-18BP 18" X 59”
05-2-24BP 24" X 59”
05-2-36BP 36" X 59"
P/N SIZE (WXL)
05-CM21-02 2" x 59”
05-CM21-04 4" X 59”
05-CM21-06 6" x 59”
05-CM21-08 8" X 59”
05-CM21-12 12" X 59”
05-CM21-18 18" X 59”
05-CM21-24 24" X 59”
05-CM21-36 36" X 59"
Solid Bottom Plate
Cable Tray Dividers
Pedestal BridgeSupport Kit
Cable Tray Covers#05-2-500982Used to secure tray sections to all supports.Material is steel wire, powder coated, 4” long. Hold down included with all supports. Order extras if required.
Hold Down Bracket
• Powder coated toprovide smooth protectivesurface for cable pulling
• Can be supplied pre-assembled tocable trays or installed in the field
Snap-On Design. Easy to install.
13
• Available in easy to handle59” lengths
• Fits cable trays 2, 4, 6, 8, 12,18, 24 and 36 inches wide
RATCHET
Ø.187
TRAY EXTENSIONOFFSET LOOP
#05-CM58During some installations, there may be sections that do not meet. The offset loop was designed to bridge the connection. The offset loops bolt to the existing loops on the tray. When attached to both ends of a section, a lateral adjustment of up to 12” is possible. To adjust, slide the cable trays, fittings or offset loops to meet and then tighten the flange hex nuts.
#05-CM99With one ratchet, you can reduce installation time by 50% or more.
6" PROTECTIVE STEEL TUBING
#05-CM80This 6" protective steel tubing is for 1/4" & 3/8" threaded rod.
UNIVERSAL LOOP
#05-CM70This universal loop is used to create a swivel point on tray connections.
ACCESSORIES
14Wiremaid and PRO-10 are trademarks of Vutec Corporation, UL and UL Classified are certification marks of Underwriters Laboratories Inc.
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted, custom made and manufactured in America.
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted,custom made and manufactured in America.
PRO-10™ Cable Management System
assembly shown
P/N WIDTH05-CM60 (20) ¼”
05-CM61 (16) ⅜”
P/N SIZE05-CM68 5/16”-18 x ¾”
05-CM72 5/16”-18 x 1-¼”
P/N WIDTH05-CM62 ¼”
05-CM63 ⅜”
P/N WIDTH05-CM65 (20) ¼”
05-CM66 (16) ⅜”
05-CM67 (18) 5/16”
COUPLING NUTSCARRIAGE BOLTS FLAT WASHERS
FLANGED NUTS
P/N WIDTH05-CM100-X ¼”
05-CM101-X ⅜”
BEAM CLAMP
Used for side dropout Used for middle or end dropout
P/N 4”05-CM59-1
05-CM59-2
05-CM59-3
05-CM59-4
05-CM59-5
05-CM59-6
05-CM59-10
P/N WIDTH05-CM59-X 4”
05-CM5906-X 6"
05-CM5908-X 8”
05-CM5912-X 12”
05-CM5918-X 18”
05-CM5924-X 24”
05-CM5936-X 36”
Ø.187WATERFALLS
END PLATE
#05-22042
CONDUIT CONNECTOR PLATE
#05-2-1109
(800) 770.4700 | CableMGR.com | [email protected] 15
SnapHook
SELF-LOCKINGFASTENER
The PRO-Hanger Ceiling Suspension System is a natural replacement for threaded rod or chain systems used in environments such as industrial buildings, distribution centers, schools, hospitals, warehouses, and retail stores. Our suspension system can be found on some of the most complex projects around the world.
Advantages• Standard weight range:
99.21 lbs. - 198.42 lbs.(weights avail. up to700 lbs.)
• Minimal installation time• Durable and lightweight• Simple to use• Versatile
#05-GR-YH5FT#05-GR-YH10FT This double-ended hanger, offers 2 hanging points on one hanger. It is a smarter solution for hanging cable trays because it improves the center of gravity to the hanger increasing stability. Each hanger comprises a length of steel wire rope with 2 hanging points at one end to form a Y-configuration. Each end fitted with a snap-hook fixing. Other end fixings are available.
Advantages• Single point suspension• Allows 2 points to be
suspended using onefastener
• 2 legs provide stabilityimproving the center ofgravity
• Fast, easy and secureinstallation
• Snap-on attachment tosecure hanger to tray
• Ideal for services thatrequire maintenance bydetaching to fix or loadcable
#05-GR-HFTRAPSuitable for a low-void ceiling, the Trapeze allows adjustment up to the ceiling (standard 5 ft. and 10 ft. lengths). Quick and effective suspension solution for pre-fabricated units.
Ideal for multi-tiered installations.
Advantages• Available as a kit in
standard lengths of5ft. - 30ft.
• Rated at a safe workingload of 200 lbs. @ 5:1safety factor
• Removable setting pinprovides easy and instantadjustment
#05-GR-HF5FT#05-GR-HF10FTFor looping around purlins, beams, roof trusses and other accessible building services.
The loop-end fixing is used for the Trapeze Hanger.
Advantages• Available as a kit in
standard lengths of5ft. - 30ft.
• Rated at a safe workingload of 200 lbs. @ 5:1safety factor
• Removable setting pinprovides easy and instantadjustment
Y-FIT FIXING TRAPEZE HANGER LOOP-END FIXING
PRO-HANGERCEILING SUSPENSION SYSTEM
TRAY SIZE(D” x W” x L”) FILL AREA *MAX # CABLES
(50% fill ratio)
**APPROX. MAX. CABLE WEIGHT
lbs./ft.
TESTEDLOAD CAPACITY
5ft.
***LBS./FT.10ft.
CM20 - (Ø.187)2 x 6 x 1 0 13.2 130 4.29 46 14
2 x 8 x 1 0 17.6 174 5.742 29 16
2 x 1 2 x 1 0 26.4 260 8.58 34 19
2 x 1 8 x 1 0 39.6 394 13.002 43 22
2 x 2 4 x 1 0 52.8 527 17.391 52 23
2 x 3 6 x 1 0 79.2 788 * * *
4 x 6 x 1 0 25.2 253 8.349 68 22
4 x 8 x 1 0 33.6 331 10.923 95 35
4 x 1 2 x 1 0 50.4 496 16.368 120 50
4 x 1 8 x 1 0 75.6 751 24.783 124 52
4 x 2 4 x 1 0 100.8 998 32.934 128 55
4 x 3 6 x 1 0 151.2 1502 * * *
6 x 6 x 1 0 37.2 370 12.21 110 48
6 x 8 x 1 0 49.6 493 16.269 108 47
6 x 1 2 x 1 0 74.4 739 24.387 124 52
6 x 1 8 x 1 0 111.6 1106 36.498 128 55
6 x 2 4 x 1 0 148.8 1444 47.652 154 59
6 x 3 6 x 1 0 223.2 2212 * * *
CM10 - (Ø.120)2 x 2 x 1 0 4.4 44 1.452 25 15
2 x 4 x 1 0 8.8 86 2.838 17 14
2 x 6 x 1 0 13.2 130 4.29 20 10
2 x 8 x 1 0 17.6 174 5.742 25 12
2 x 1 2 x 1 0 26.4 260 8.58 31 16
4 x 6 x 1 0 25.2 252 8.316 35 17
4 x 8 x 1 0 33.6 336 11.088 41 20
4 x 1 2 x 1 0 50.4 484 16.632 55 35
* Contact Technical Support for 36" load data.
Product & Installation OverviewPRO-10™ should be installed from the originating head-end i.e.,the electrical or telecommunications closet. Once the pathway has been established, it is important to install the pre-fabricated junctions first. This allows for proper field measurements before installing the cable tray. If the straight sections are installed first, it will cause unnecessary field adjustments. Each section has loops at each end. When the sections are connected, the loop on the bottom aligns under the exposed galvanized area of the adjoining section.
The loop on the side slides into the outside loop guide. Once the trays are aligned, install the 5/16" carriage bolt (included) through the loops with the threaded end to the outside of the tray. This reduces the chances of damage when pulling the cables. Install and tighten the flanged nuts with a 1/2" socket. It is not recommended that the cable tray be cut as it may interfere with the grounding characteristics and UL classification®.
CM20 & CM10 LOAD & FILL CHARTS
*Chart is based on 50% fill of 4 UTP Category 6 cable (O.D. = .21 .033 lbs./ft.)**Not maximum loading weight for the tray, practical guide on amount of cable weight that can be installed.
***Tested in accordance with NEMA VE-1/CSA E222.2 #126.1
16Wiremaid and PRO-10 are trademarks of Vutec Corporation, UL and UL Classified are certification marks of Underwriters Laboratories Inc.
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted, custom made and manufactured in America.
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted,custom made and manufactured in America.
(800) 770.4700 | CableMGR.com | [email protected] 17
STARTING THE INSTALLATIONIt is recommended that the installer starts at a junction location and attach tray sections from that point out. The hanging or mounting hardware should be secured to the building structure first, spaced at 5 ft. intervals.
CONNECTING CM20 STRAIGHT AND JUNCTION SECTIONS1. Loop tray end slides into other tray end. Connecting exposed sections provides UL continuity. (See
Figure 1)2. Push the tray firmly together as shown. (See Figure 2)3. Insert the carriage bolts and tighten the nuts. (See Figure 3)4. Once tightened, the patented loop connection is extremely high load bearing, secure and will maintain
continuity throughout the tray system. (See Figure 4 & 5)
FIG. 1 FIG. 2
FIG. 3 FIG. 4
FIG. 5
It is not necessary to install bonding straps or jumpers to every tray.
The PRO10TM CM20 System is a UL approved equipment ground conductor.
INSTALLATIONINSTRUCTIONS
18Wiremaid and PRO-10 are trademarks of Vutec Corporation, UL and UL Classified are certification marks of Underwriters Laboratories Inc.
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted, custom made and manufactured in America.
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted,custom made and manufactured in America.
ZF
Stainless Steel Contact Points and Hardware
Durable Powder Coat
Finish
ZINC WHISKER FREE
• The next generation of PRO-10 cable tray fordata centers and high-end tech spaces.
• PRO-10 ZF raises the performance bar byeliminating potential sources of Zinc Whiskergrowth and contamination.
• Patented design offers proven safety andreliability to the industry's most advancedwire mesh basket cable tray system.
Designed for Data Centers!• 100% UL classified sections and fittings paired
with integrated bonding and splicing partsmaintains the entire system UL classified afterinstallation.
• A Zinc Free environment with the strength ofsteel and the beauty and durability of powdercoated finishes.
(800) 770.4700 | CableMGR.com | [email protected] 19
WIREMAID
Environmentally Friendly, Safe and Green
Cable Trays are made of Post Consumer Recycled Materials
Green Manufacturing techniques for reclaimable products and energy efficient processes
Prefab fittings requires no cutting which completely eliminates scrap
Minimal waste recycled powder coat process, emits zero Volatile Organic Compounds (VOC)
Minimal raw materials used
No heavy materials such as Hexavalent Chromium
After production, the trays are able to be stacked to reduce the amount of containers and energy used to ship to the installation site
Classified by Underwriters Laboratories (UL & cULus) as to their sustainability for use as an equipment grounding conductor in accordance with Sections 392.3(C) and 392.7(B) of the NEC
Comply with the NFPA 70, National Electrical Code (NEC) as applicable, relating to construction and installation of cable tray and cable channel systems (Article 392, Cable Trays)
Cable-MGR is an innovative leader in the industry by taking the necessary steps in manufacturing techniques that are cost effective, recyclable and environmentally safe
ECO-FRIENDLY
092016
*U.S. Patent No. 7,546,987All rights reserved. All other trademarks and company namesmentioned are the property of their respective owners. Thecontents of this document cannot be reproduced, copied ordistributed without prior written approval.
04/2018
FOR INSTALLATION OR TECHNICAL SUPPORT QUESTIONS
CONTACT CUSTOMER SERVICE
WIREMAID PRODUCTS CORP.11711 W. Sample Rd | Coral Springs, FL 33065
(800) 770.4700 | Fax: (800) 548.5885www.CableMGR.com | WireMaidUSA.com | [email protected]
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted, custom made and manufactured in America.
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
★ ★ ★ ★ ★
Proudly hand-crafted,custom made and manufactured in America.
WIREMAID