Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Architectural Emergency
SD SeriesDie Cast Aluminum LED
Step Light
codes and standards• ETL Listed• ETL wet location listing for die-cast back box only• ADA compliant• LM-79 compliant photometryconstruction• Steplight back boxes shall be constructed of die-cast
aluminum alloy or 18-gauge cold rolled steel in baked white powder coat finish. The housing body shall have two cable entries to facilitate wiring. Concrete tight 1/2" conduit fitting provided with diecast back box: 7/8" knockout for steel back box. Diecast back box is suitable for wet locations.
• Lens is .125" clear tempered glass, clear polycarbonate lens (high density, U.V. stabilized and impact resistant) or white opal polycarbonate.
• A closed cell, weather proof gasket is secured to the back box with two screws.
• Faceplate is constructed of die cast aluminum alloy.• The faceplate is a baked powder coated paint finish.• Available in white, black, dark bronze, and special
color finishes (Specify RAL#).installation• Indoor model backboxes mount in wood stair
cavities and standard stud construction walls by means of mounting brackets (supplied).
• Outdoor model backboxes are suitable for poured concrete stair and wall installations.
• Knockouts are provided on both sides of the unit backbox for conduit attachment.
• Stainless steel Allen Head Tamperproof screws are standard. Optional stainless steel Allen head center pin reject tamperproof fasteners are available.
• Optional Agion™ Antimicrobial protection using silver technology inhibits bacterial colonization on metal interior and exterior surfaces. Agion™ antimicrobial FDA recognized and EPA registered, meeting all applicable EPA standards.
• Back Box may be ordered separately for installing during rough-in-stage of project. Specify the LBB option in catalog number for the louver faceplate and specified lens. Order either the SDIBB or SDOBB for the back box that contains the electronics.
electronics• Universal 120/277VAC input• 61.6mA Line Amps• 7.15W Input Wattagelamps• Available in White and Amber LEDs. Lamp Life:
Rated for 10 years of continuous operation.warranty• Unit has 5-years full coverage against defects in
materials and workmanship from date of shipment. Lamps excluded.
Project
Type
Model No.
Comments
Specifier’s Reference
Green Product Choice: SDIHLCWWT
CM-25550
SDI – Indoor Step Light w/Steel Backbox
SDO – Outdoor Step Light w/Die-Cast Aluminum Backbox
C – Clear Polycarbonate T – Clear Tempered Glass O – Opal Polycarbonate
W – White Faceplate WA – White Faceplate with
Agion™ antimicrobial protection.
B – Black Faceplate BZ – Bronze Faceplate CC – Special Finish Faceplate (Specify RAL#)
Family Lens
Finish HL – Horizontal Louver Face HO – Horizontal/Vertical
Open Face VL – Vertical Louver Face
WT –White AM – Amber
LBB – Less Back Box1
TP – Tamper proof fasteners
Faceplate
LED Color
Options
Accessories (order separately)Back Boxes – to be ordered separately if “LBB” option is specifiedSDIWTBB – Indoor Back Box, White LEDsSDIAMBB – Indoor Back Box, Amber LEDsSDOWTBB – Outdoor Back Box, White LEDsSDOAMBB – Outdoor Back Box, Amber LEDs
Footnotes1 Step Lights specified with the LBB option will contain the
louver/faceplate and specified lens only. The back box to be ordered separately (see accessories).
CM-25550 10/14
0.1 0.1 0.1 0.2 0.1 0.1
0.1 0.1 0.3 0.4 0.5 0.3 0.3 0.1
0.1 0.3 0.6 0.8 0.8 0.6 0.3 0.1
0.1 0.1 0.4 0.8 1.1 1.1 0.7 0.3 0.1
8'-0"
3'-6"
3.5"(88.9 mm)
2.9"(73.7 mm)
3.6"(91.4 mm)
9.8"(248.9 mm)
4.5"(114.3 mm)
Indoor Backbox (Steel)
3"(76.2 mm)
3.6"(91.4 mm)
9.8"(248.9 mm)
Outdoor Backbox (Cast Alum.)
Rough Opening (All Models):3" x 9" (7.6 cm x 22.9 cm)
The photometric results were obtained in the Philips Day-Brite laboratory which is NVLAP accredited by the National Institute of Standards and Technology.
Photometric data based on tests performed in compliance with LM-79.
CM-25550 SD Series Die Cast Aluminum LED Step Lightdimensions
photometrics
0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1
0.1 0.1 0.1 0.1 0.1 0.1 0.2 0.1 0.1 0.1 0.1 0.1
0.1 0.1 0.1 0.2 0.2 0.3 0.4 0.4 0.3 0.3 0.2 0.1 0.1 0.1
0.1 0.1 0.1 0.2 0.4 0.9 1.0 1.2 0.9 0.7 0.3 0.2 0.1 0.1
0.1 0.1 0.2 0.4 0.9 1.6 2.2 2.2 1.6 0.9 0.4 0.2 0.1 0.1
0.1 0.1 0.2 0.5 1.3 2.2 3.1 2.9 2.2 1.1 0.5 0.2 0.1 0.1
13'-0"
White LED Horizontal Louver with Clear Glass Lens
White LED Open Face with Clear Glass Lens
(Mounted 18" A.F.F.)Test No. 30076Catalog No. SDI-HL-T-UNV-WTLM-79 Absolute PhotometryLumen Output: 17 LumensLamp: 6W LED
(Mounted 18" A.F.F.)Test No. 30075Catalog No. SDI-HO-T-UNV-WTLM-79 Absolute PhotometryLumen Output: 70 LumensLamp: 6W LED
CM-25550 10/14 page 2 of 2
© 2014 Koninklijke Philips N.V. All rights reserved. Specifications are subject to change without notice.www.philips.com/luminaires
Philips LightingNorth America Corporation200 Franklin Square Drive Somerset, NJ 08873Tel. 855-486-2216
Imported by: Philips Lighting a division of Philips Electronics Ltd.281 Hillmount Rd, Markham, ON Canada L6C 2S3Tel. 800-668-9008