16
November 2006 www.isa.org/~oranc INSIDE THIS ISSUE… Upcoming Regional Events Instrumentation Basics Tues, Nov 7 - Instrumentation Physics Tues, Nov 21 - Calibration Practices Tues, Nov 28 - Flow, Temp, Press, Level Details page 12. OC-LA Christmas Party Saturday, December 9th. Back will be Casino Night! Details page 10. Instrumentation 2007 Thursday, February 22, 2007. Carson Civic Center. Details page5. In today’s process control systems, which are applied in Water/Wastewater and in many other industries, there are primarily two types of systems to choose from, open or closed. This presentation will look at process control and how it is applied and will take a close look at open systems versus closed systems and the advan- tages of each. The systems will be reviewed from both the hardware and software perspectives, with the goal that the audience should take away an understanding of what open vs closed means and a better approach to making decisions when having to choose a process controller. Discussion topics will include batch and continuous control, DCS, PLC, Instrumentation Field Busses, Networks, and related items. About the Speakers Reid Hogue is with Rockwell Automation-AllenBradley, and can be reached at (949) 212-4388 or [email protected]. Lane Phillips is with OneSource Distributors and can be reached at [email protected]. A special thanks to Rockwell Automation for sponsoring the meeting. Meeting Details Place: Rockwell, 2125 E. Katella Ave, Suite 250, Anaheim, between State College and 57 Fwy. Time: 5:00 pm - networking; 6:00 pm – program. Date: Wednesday, November 8th (2nd Wednesday) RSVP: Hiten A. Dalal, NEWTECH Resources at [email protected] or (714) 500-1018 November Section Meeting Closed vs. Open Process Control System There are many men of principle in both parties in America, but there is no party of principle. — Alexis de Tocqueville Instrumentation, Automation, and Computer Applications Photo courtesy of Hiten Dalal, NEWTECH Resources Members & advertisers! Check your listing for the New 2007 Member Directory and Buyers Guide 2 - President’s Message 3 - DVP: ISA is at work for you 4 - SSJV: Golf, Feast, Tabletop, Benefit PE License Update 5 - Instrumentation 2007 6 - Careers: Instrument Technician 8 - Local Section Meetings 9 - Regional Events 10 - What is RSS? LA/OC Christmas Party 11 - Wastewater Neutralization Processes 12 - Training: PLC, CCST, Instrumentation 14 - Job Shop The new 2007 Southern California and Nevada Member Directory and Buyers Guide will be printed in December. Member listings will be downloaded on November 30th. So before then, please log into www .isa.or g, click on “Members” at the left, select “Member Directory” and search for your own name. This is how your information will appear in the printed directory. If your phone and email address are not shown here, and you would like them listed, you will need to change your preferences online or by contacting Dalton Wilson at ISA at (919) 549-8411. Advertising information for the Buyers Guide can be found at www .techpubs.net/directory.

Closed vs. Open Process Control System · are applied in Water/Wastewater and in many other industries, there are primarily two types of systems to choose from, open or closed. This

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

November 2006 ISA Newsletters, Southern District 11 1

November 2006

www.isa.org/~oranc

INSIDE THIS ISSUE…

Upcoming Regional Events

Instrumentation BasicsTues, Nov 7 - Instrumentation PhysicsTues, Nov 21 - Calibration PracticesTues, Nov 28 - Flow, Temp, Press, LevelDetails page 12.

OC-LA Christmas PartySaturday, December 9th. Back will beCasino Night! Details page 10.

Instrumentation 2007Thursday, February 22, 2007. CarsonCivic Center. Details page5.

In today’s process control systems, whichare applied in Water/Wastewater and in manyother industries, there are primarily two types ofsystems to choose from, open or closed. Thispresentation will look at process control and howit is applied and will take a close look at opensystems versus closed systems and the advan-tages of each.

The systems will be reviewed from both thehardware and software perspectives, with thegoal that the audience should takeaway an understanding of what open vs closedmeans and a better approach to making decisions when having to choose a process controller.

Discussion topics will include batch and continuous control, DCS, PLC, Instrumentation FieldBusses, Networks, and related items.

About the SpeakersReid Hogue is with Rockwell Automation-AllenBradley, and can be reached at (949) 212-4388 or

[email protected]. Lane Phillips is with OneSource Distributors and can be reached [email protected]. A special thanks to Rockwell Automation for sponsoring the meeting.

Meeting DetailsPlace: Rockwell, 2125 E. Katella Ave, Suite 250, Anaheim, between State College and 57 Fwy.Time: 5:00 pm - networking; 6:00 pm – program.Date: Wednesday, November 8th (2nd Wednesday)RSVP: Hiten A. Dalal, NEWTECH Resources at [email protected] or (714) 500-1018

November Section Meeting

Closed vs. Open ProcessControl System

There are many men of principle inboth parties in America, but there isno party of principle. — Alexis de Tocqueville

Instrumentation, Automation, andComputer Applications

Photo courtesy of Hiten Dalal, NEWTECH Resources

Members & advertisers! Check your listing for theNew 2007 Member Directory and Buyers Guide

2 - President’s Message 3 - DVP: ISA is at work

for you 4 - SSJV: Golf, Feast,

Tabletop, BenefitPE License Update

5 - Instrumentation 2007 6 - Careers: Instrument

Technician 8 - Local Section Meetings 9 - Regional Events 10 - What is RSS?

LA/OC Christmas Party 11 - Wastewater

Neutralization Processes 12 - Training: PLC, CCST,

Instrumentation 14 - Job Shop

The new 2007 Southern California and Nevada Member Directory and Buyers Guide will beprinted in December. Member listings will be downloaded on November 30th. So before then,please log into www.isa.org, click on “Members” at the left, select “Member Directory” andsearch for your own name. This is how your information will appear in the printed directory. Ifyour phone and email address are not shown here, and you would like them listed, you will needto change your preferences online or by contacting Dalton Wilson at ISA at (919) 549-8411. Advertising information for the Buyers Guide can be found at www.techpubs.net/directory.

2 ISA Newsletters, Southern District 11 November 2006

The monthly ISA Section NewslettersISA Section NewslettersISA Section NewslettersISA Section NewslettersISA Section Newsletters and annual Regional Membership Directory and Buyers’ Guide Regional Membership Directory and Buyers’ Guide Regional Membership Directory and Buyers’ Guide Regional Membership Directory and Buyers’ Guide Regional Membership Directory and Buyers’ Guide are mailed to all ISA section members in SouthernCalifornia and Southern Nevada and to ISA student affiliates at Cal Poly Pomona, Cal State Fullterton and Long Beach State. Newsletters include the South San JoaquinValley Alarm, Los Angeles Annunciator, Orange County Chart, San Diego Signal and Las Vegas Experience. Changes of address Changes of address Changes of address Changes of address Changes of address can only be processed by ISA by at(919) 549-8411 or www.isa.org. For editorial submissions and feedback,editorial submissions and feedback,editorial submissions and feedback,editorial submissions and feedback,editorial submissions and feedback, please contact the newsletter editor. Advertising rates, circulation informationAdvertising rates, circulation informationAdvertising rates, circulation informationAdvertising rates, circulation informationAdvertising rates, circulation informationand style guideand style guideand style guideand style guideand style guide is posted at www.TechPubs.net. Billing Billing Billing Billing Billing and publishing correspondence may be addressed to TechPubs Communications, PO Box 1605, CostaMesa, California 92628. Submissions are copyright by the authors with all rights reserved. Copyright (C) 2006 TechPubs Communications. All Rights Reserved.

Orange County SectionOfficers 2006-2007www.isa.org/~oranc/

President’s messageBy Craig Lanternier, Section President○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Craig Lanternier

President — Craig LanternierFluor Enterprises, (949) [email protected]

President Elect — Open

Treasurer — Gautam ParikhFluor Enterprises, (949) [email protected]

Secretary — Jesus MoncayoCoffin World Water Systems(949) 222-5777, ext. [email protected]

Past President — John QueridoJontec Systems, (949) [email protected]

Society Delegate — Sarah SheldonFluor Enterprises, (949) [email protected]

Alternate Delegate — Christine DorganDisneyland Resort, (714) [email protected]

Arrangements Chair — Hiten DalalNewtech Resources, (714) 500-1000ext 1018, [email protected]

Education Chair — John GongICP-DAS USA, Inc., (310) [email protected]

Historian/Honors & Awards Chair —John QueridoJontec Systems, (949) [email protected]

Membership Chair — Don ZeeDon Zee and Associates, (949) [email protected]

Membership Co-Chair — Bis MitraFluor Enterprises, (949) [email protected]

Newsletter Editor — John PrinceAPG Analyzer Systems, (714) [email protected]

Program Chair — Sarah SheldonFluor Enterprises, (949) [email protected]

Publicity Chair — Sebastian ZielonkaFluor Enterprises, (949) [email protected]

Student Section Liaison —Bob HarrisonConex Systems, (714) [email protected]

Treasurer’s Report BY 2005-2006Orange County Section

April 4, 2006

Actual Budget

INCOME Arrangements 3,450.00 3,600.00Dues/Mbrshp/Publicity 2,634.48 4,000.00Education 720.00 1,500.00Interest Income - 300.00X-Mas Party - 3,500.00Student Section - 1,000.00Misc. - 250.00TOTAL INCOME $6,606.48 $14,150.00

EXPENSES President’s Budget - 200.00Arrangements 2,645.71 3,500.00Membership/Mkg - 500.00Programs - 400.00Education 527.82 500.00Insurance - 350.00Honors Awards 26.94 200.00Student Competition - 500.00Misc. 100.00 250.00Pres. Meeting 1,838.51 1,500.00Society Delegate 1,401.02 1,500.00Pres. Elect - 1,200.00X-Mas Party 4,121.14 3,500.00District Workshop - 1,000.00Planning Meeting - 100.00Student Section - 250.00Treasurer 38.75 100.00TOTAL EXPENSES $10,699.89 $15,550.00

NET ($4,093.41) ($1,400.00)

Balances: Checking Account: $4,317.59Certificates of Deposit: $43,546.91

PresidentISA Orange County SectionFluor CorporationElectrical & Control Systems(949) [email protected]

I took off a little early from work on Oct. 10th to make it to the ISA-LA Sectionmeeting on Introduction to Safety Instrumented Systems (SIS) and Critical Controls in theProcess Industry presented by Robin McCrea-Steele , Senior Safety Consultant /Director of PCS Business Development at Invensys - Premier Consulting Services. Anoverview of safety standard ANSI ISA S84.01 (IEC61511Mod) was presented, alongwith the definition of Safety Integrity Level (SIL) and a description of methods used forSIL assignment and verification. The Gas Company’s Energy Resource Center at 9240Firestone Blvd. in Downey, proves to be a very nice venue. Also, saw a few of my fellowOC members there taking advantage of this opportunity.

Our October meeting was held on the 11th in Fluor’s Irvine office near the UCICampus, and was titled Successful Execution Strategies, and Lessons Learned from an

LNG plant in Mexico using Main Automation Contractor (MAC). Romel S. Bhullar from Fluor, gave anexcellent presentation followed up with many recent site photos and questions from those in attendance. It wasgreat to see both of these meetings very well attended, demonstrating the continued upswing in the automationbusiness and the influx of many younger professionals eager to learn.

For those interested in staying current with latest technological innovations in the world of analysis, theproposed ISA-OC Analysis Division Educational Symposium is now taking shape due to the efforts of JohnQuerido, John Gong, Sandra Krauthamer and Paul Otteman. Target date is sometime in February 2007,and will most likely consist of a half-day schedule on a Saturday.

One last reminder: The ISA-OC/ISA-LA Annual Christmas Party is approaching soon, December 9, 2006.As you all know this includes dinner, raffles, award ceremony, silent auction, casino gambling, and socializing.Location is the Ramada Inn Suites and Hotel, 1089 Santa Anita Avenue, South El Monte (see the article in thismonth’s Chart for more information and how to get tickets). Hope to see you there.

Webmaster — Bob HarrisonConex Systems, (714) [email protected]

District 11 Vice President —Joe BinghamAES Automation, (714) [email protected]

District 11 V Pres Elect — Ray SpanglerCentral Automation, Inc., (661) [email protected]

ISA Staff Contact — Dalton WilsonISA, (919) 990-9280, [email protected]

November 2006 ISA Newsletters, Southern District 11 3

Message from the DVP

Yours truly,Joe BinghamDistrict Vice-President, District 11, 2006 - 2007Chairman, Engineering, Science, & Technology policy for ISA, 2005-2006Chairman SP - 101, HMI’sMember of the Executive Board of ISA

I’m actually writing this article at 31Kfeet up in the air traveling from Philadelphiato Montreal, CA. Why, that’s another storythat I’ll tell you later.

Your ISA leaders just completed anotherweek of attending committees, meetings, andother functions at the leadership meeting inHouston, TX. The executive board voted onallocating 20% of the ISA reserves (around6.6 million dollars) to support ISA’s fivecompetences (Standards, Training, Certifica-

tion, Publishing, and Conferences & Exhibits) as well as provide itsmembership free standards. That’s right, soon you will all get access tothe standards for free. In the coming months I will continue to informyou on the changes that are happening at ISA for the better good of itsmembers.

Delegates from all section also officially elected Kim Dunn (of theLA section) as president elect secretary. Yes, this means that she will bethe youngest president ever and not to mention the fist female in ISAhistory.

ISA is at work for youOur Cal. Poly Pomona students came in second this year at the

international student games. They competed against eleven otheruniversities and collages. They did an awesome job. They were lead bynone other than Saif Rawas and his team Sandy Kwan, Steve Jankly,Amir Eshraghi lead by their advisor, Prof. Salomon Oldak.

As always, please let me know if you like my messages or thinkthat I’m way off track. Also please let me know if you have anyquestions, concerns, comments, etc. You can reach me at 714-625-9021or [email protected].

4 ISA Newsletters, Southern District 11 November 2006

Now that the period for the governor toconsider bills is over, the California LegislativeCouncil of Professional Engineers (CLCPE) willbe approaching legislators and others inSacramento to test the winds for next year. Nowthat the summer election is over and thelegislature is out of session they will not bepreoccupied. After CLCPE has surveyed thesituation, a report on the next course of actionwill be given, according to a CLCPE spokesman.

As far as efforts to reform Californiaengineering licensing law and with SB246 nolonger a possibility, CPCPE considers the mosteffective course at this time may be through thecourts. Unfortunately this is a lengthy process,which is what the legislative process has turnedout to be, and more expensive, indicatesCLCPE.The Spinach Effect

The spinach contamination events recentlyin the news should be of great interest to peoplewho use engineering services. Unfortunately forthe public, safety is not considered a news-worthy topic until after a tragedy such as thishas occurred. In this case, AgriculturalEngineers (also a title license, like ControlSystems Engineers) will likely be at theforefront in the investigation and in developingmethods to prevent this from happening again.

Another development is the governorsigning the bill to reduce greenhouse emissions,which would seem to involve the services ofChemical Engineers (also a title license). As withthe spinach event, this situation will also bestudied by CLCPE.

CLCPE continues to press for engineeringregulation reform. No real activity takes placeuntil after the November elections.

PE License Update

PE Licenseactivities afterSB246

Southern San Joaquin Valley Section

Visit our web site:http://isan.tescom.com

Eme

rso

n a

nd

th

e E

me

rso

n lo

go

are

tra

de

mar

ks a

nd

se

rvic

e m

arks

of

Eme

rso

n E

lect

ric

Co

Tesc

om

Co

rpo

rati

on

20

05

; All

rig

hts

re

serv

ed

.

Tentative dates have been set for Southern San Joaquin Valley Section’sAnnual Scholarship Fund Benefit; the Golf Tournament and Tabletop Exhibit &Cajun Feast as May 17 & 18, 2007.

2007 DLC to bein Bakersfield

Ray Spangler, who was recentlyelected District 11 Vice President-elect,has advised the Executive Board that the2007 District 11 Leadership meeting willbe held in Bakersfield. More informationwill available in the near future as to thedate, location, and agenda of the event.

Scholarship Fund Benefit,Golf Tournament, TabletopExhibit & Cajun Feast

November 2006 ISA Newsletters, Southern District 11 5

The Los Angeles Section of ISA is proud to host INSTRUMEN-TATION 2007 its annual training and exhibition, to be held Thursday,February 22, 2007, at the Carson Civic Center. This highly anticipatedevent provides a great way for local industry professionals to meetface to face and access the most up-to-date technologies SouthernCalifornia has to offer. Practical industry training will be a major partof this year’s show. As schedules are confirmed, the program andtraining class details will be posted at the website,www.Instrumentation2007.com.

The Carson Civic Center (formerly Carson Convention Center)was chosen because it is near a number of oil refineries and heavyindustry. It is the perfect location to bring end users, manufacturers,engineering firms, systems integrators and other industry profession-als together to network and exchange ideas. Centrally located off the405 Freeway at 801 E Carson Street it is adjacent to the five-starDoubletree Hotel (formerly Hilton Carson) and is twenty minutesfrom Downtown Los Angeles.For more information...

For details about Exhibiting contact Paul Patel at (310) 277-3734 or [email protected]. For Training Events contact Neil Finchat (951) 675-3395 or [email protected]. For Program Infocontact John Prince at (714) 968-5501 or [email protected].

Carson Civic Center photo

Instrumentation 2007: expo and trainingLos Angeles Section

For all other information or general information about the event, pleasecontact Kristina Balobeck, Expo Director, at (818) 203-7436 [email protected].

Please check the event website frequently for more information,www.instrumentation2007.com.

6 ISA Newsletters, Southern District 11 November 2006

You may have to look hard to find one, though. If you talk withthose in the industry, you already know that instrument techs are inshort supply. Next time you are talking with someone looking for acareer and who likes varied work and challenging work, invite them tothe next ISA section program or tour and introduce them to this field.

Instrumentation vibration, temperature, humidity, pressure,differential pressure, liquid flow and level, altitude, acceleration, stressand chemical analysis of gases and liquids in chemical plants, canneries,food processing plants, air and water pollution control agencies,petroleum refineries, power plants, aerospace, the process industryand manufacturing facilities. Some of us program controllers andcomputers to process data, prepare data graphs and written reportstranslating test results into meaningful terms.

We select, install, calibrate, manufacture, supply instrumentation,and develop specifications for nonstandard apparatus and equipment.They may make sketches and build or modify jibs, fixtures, instru-ments, and related apparatus. They also may verify the acceptabilityof devices which have been fabricated by craft workers or othertechnical personnel. In addition, technicians, troubleshoot, repair, andperform preventive maintenance on test apparatus and peripheralequipment.

Some info about instrumentation technicians... They test, certify,install, repair, inspect, maintain, and help to develop complex

instruments that measure and record changes in industrial environments.The process-controlled systems operated by these technicians are centralto the operation of such facilities as chemical plants, canneries, foodprocessing plants, air and water pollution control agencies, petroleumrefineries, and power plants.

Technicians test and record the effects of varying conditions, actualor simulated, such as vibration, temperature, humidity, pressure, differen-tial pressure, liquid flow and level, altitude, acceleration, pH, conductivity,stress, and chemical analysis. They prepare graphs and written reportstranslating test results into meaningful terms.

Technicians select, install, calibrate, and check out telemetering andrecording instruments and circuits. Using engineering data, and consideringthe limitations of the equipment being tested, they develop specificationsfor nonstandard apparatus and equipment.

They may make sketches and build or modify jibs, fixtures, instru-ments, and related apparatus. They also may verify the acceptability ofdevices which have been fabricated by craft workers or other technicalpersonnel. In addition, technicians, troubleshoot, repair, and performpreventive maintenance on test apparatus and peripheral equipment.

Some Instrumentation Technicians work as field service representa-tives who install and maintain equipment and systems at the customer’sworksite. In addition to providing preventive and corrective maintenance,

Careers Update

November is Take an Instrument Tech toLunch Month!

News, Photosand Feedbackfrom ISA Expo2006 are on theway!

If you were at ISA EXPO inHouston, we would like to hear whatyou liked and what you thought needs tobe improved. We have already hearing back fromseveral who attended or exhibited andplan to publish a summary of all thecomments in next month’s newsletter. Also, if you have photos or otherinformation, please send to the editor [email protected].

November 2006 ISA Newsletters, Southern District 11 7

their duties may involve training the customer’s employees and advisingthem of proper procedures to use to avoid equipment breakdowns.

In the performance of their duties, technicians operate calculators,computers, testing devices, and laboratory equipment. They use draftingtools, complex electronic and mechanical instruments, and also useengineering handbooks and other reference materials.Working Conditions

Although working conditions vary widely for InstrumentationTechnicians, most work areas will be relatively new, modern, air-conditioned buildings that offer a pleasant working environment.Instrumentation Technicians may work in the engineering or prototypedepartment, in the main production department, or at their own testbenches. Due to the delicate nature of many electronics products,technicians may perform much of their work in “clean rooms” in whichthe temperature, humidity, and dust content of the air are carefullycontrolled. All workers in clean rooms wear masks, gloves and smocks orcoveralls, which are usually referred to as “bunny suits.” The work mayoccasionally require lifting up to 20 pounds, standing, stooping,climbing, and working in tight or confined control panels. Depending onthe worksite, technicians may be exposed to chemicals, extremetemperatures, pressures, and vacuum.Employment Outlook

The following information is from the California Projections ofEmployment published by the Labor Market Information Division. Thefigures represent the broad occupational group Electrical and ElectronicsEngineering Technicians and Technologists that includes InstrumentationTechnicians.

Estimated number of workers in 1993 49,250. Estimated number ofworkers in 2005 58,760. Estimated Growth 1993-2005 19%. (Thesefigures do not include self-employment or openings due to turnover.)

A projected increase of over 9,000 new jobs, combined with theestimated 14,000 workers leaving the labor force, were estimated tohave resulted in 23,000 job openings in California by the year 2005 forinstrumentation technicians.

The need for industry to modernize, install labor-saving equip-ment, and replace old systems with those featuring the latest technolo-gies assures a continuing need for Instrumentation Technicians.

The standard workweek is 40 hours, Monday through Friday.Many companies employ technicians on swing and night shifts. Nightshift employees can expect up to an additional 10 percent in pay.Most plants shut down twice a year to overhaul their continualoperating systems. These “turnarounds” (lasting one to three weekseach) can offer Instrument Technicians 12-16 hour work days, sevendays a week.

Field service technicians normally have the opportunity forunlimited overtime by being “on call” during their off-duty hours. Suchovertime work is sometimes compensated at time and one-half, ordouble time on holidays.Entrance Requirements and Training

Instrumentation Technicians must understand and applyelectronics theory. High school students interested in this field shouldstudy mathematics, general physics, and laboratory science. Thesejobs, according to representatives from personnel departments, willrequire at least two or three years experience, an Associate of Arts orScience degree, or completion of an Instrument Technician program at aprivate technical school.

California has several private and public two-year colleges andtechnical schools offering courses in instrumentation technology orengineering technology. Technicians learn hands-on laboratory skills as

Careers Update, continued on page 15

Analyzer Sample System Components

Distributors of Pressure and Flow Controls:Pressure regulators, pressure indicators, flowmeters,filters, separators, thermometers, and enclosures

13413 Benson Ave., Chino CA 91710TEL: (909) 590-0408 FAX: (909)590-4146

www.precinstr.com

Analyzer Sample System Components

8 ISA Newsletters, Southern District 11 November 2006

Local section meetingsFor more details about any of the section meetings, please contact the section president, website or read each section’s completenewsletter online at www.techpubs.net/isanews.

Orange County Wed., Nov 8 President - Craig Lanternier, [email protected]

Closed vs. Open Process Control System: Instrumentation,Automation, and Computer Applications. This presentation willlook at process control and how it is applied and will take a closelook at open systems versus closed systems and the advantages ofeach. Discussion topics will include batch and continuous control,DCS, PLC, Instrumentation Field Busses, Networks, and relateditems. Speakers: Reid Hogue, Rockwell Automation-AllenBradley,Lane Phillips, OneSource Distributors. Location: RockwellAutomation, 2125 E. Katella Ave, Suite 250, Anaheim, between StateCollege and 57Fwy. 5:00 networking; 6:00 program. RSVP to HitenA. Dalal at [email protected] or (714) 500-1018. Section website:www.isa.org/~oranc.

Southern San Joaquin Valley Thursday, Nov 16 President - Del Signorelli, [email protected]

Chevron I/T Infrastructures. Our next luncheon will feature RickSmith from Chevron I/T. It should be an interesting presentation forall of us as Rick will be discussing varying components of I/Tinfrastructures. Location is Hodels, 5917 Knudsen Drive, Bakersfield,just west of Hwy 99 at Olive, from 11:30 am until 1:00pm. RSVPto Lisa Denke at Berry Petroleum, (661) 201-7842 [email protected]. Section website: www.isa.org/~ssjv.

• FLOWMETERS

• CHART RECORDERS

• LEVEL

• PRESSURE

• TEMPERATURE

• AUTO DIALERS

• CONTROLLERS

• GAUGES

• WIRELESSCOMMUNICATION

• VALVE AUTOMATION

• ANALYZERS

• SAMPLERS

3D InstrumentsDirect Drive Process and Test Gauges, Digital Processand Test Gauges, Diaphragm Seals, Hand Pumps andThermometers

B S & B Safety SystemsIndustrial & Sanitary Rupture Disks, Explosion Vents,Wireless Sensor Systems, Suppression Systems

Kurz InstrumentsAir & Gas Thermal Mass Flow Meters, Flow Conditioners, CEM Flow Systems, Portable Flow Meters

L & J TechnologiesL&J Technologies(Shand & Jurs - GPE - Omnitrol - Delavan),Tank Gauging Systems, Radar & Servo, Tank Vents, BreatherValves, Gauge Hatches, Flame & Detonation Arrestors/ VaporRecovery, Capacitance and Ultrasonic Level

Meriam Process TechnologiesHART Configurators, Calibrators & Software, Averaging Pitot Tubes, Laminar Flow Elements, Digital Manometers

Moore IndustriesIntelligent Distributed I/O, Alarm Trips, Isolators, Temperature Transmitters, I/P’s, AC Power Transducers,Controllers, Fieldbus Device Couplers and Power Supplies

Sparling InstrumentsMagnetic Flowmeters, P

United Electric ControlsElectronic & Mechanical Switches & TransducersFor Pressure, Differential Pressure & Temperature

ropeller Meters, Vortex Flow Meters, Ultrasonic Flow Meters

Vishay BLHLoad Cells, Electronic Weighing, Tension Measurement,Weight Display and Control

Patten Systems, Inc.Industrial & Municipal Representatives

15201 Springdale Street • Huntington Beach, California 92649

Tel (714) 799-5656 • Fax (714) 799-5353 • www.pattensystems.com

BAKERSFIELD • LAS VEGAS • SAN DIEGO

NuFlo Measurement Systems(Barton & Former Haliburton Measurement Systems)D.P. & Pressure Transmitters, D.P. Indicators & RecordersTurbine Meters, PD Meters, Totalizers, Samplers, OrificeFittings, Relief Valves

NuFloMeasurement Systems

Ronan Display Products DivisionAnnunciators, Mosaic Graphics, Serial AnnunciatorsSequence of Events Recorders, Fault Finders, ProtocolConverters & Lamp Boxes

Honeywell Analytics(Sieger, Zareba & Zellweger)Combustible & Toxic Gas Detectors, IR Gas Detectors,Open Path IR, Controllers & Flame Detection

DISTRIBUTORS FOR:

Los Angeles Tues., Nov 21 President - John Prince, [email protected], (714) 968-5501

Fieldbus in the Refinery Environment. This introduction toFoundation Fieldbus will look at the advantages and challengesinvolved in implementing Fieldbus systems. The presentation willcenter on Fieldbus applications in the refinery environment includingdefinitions, specifications, architectures, redundancy, and segmentcapacity including calculations and considerations. The presentationwill address intrinsically safe, and hazardous and general purposeareas. Specifically, the presentation will focus an in-depth look atFoundation Fieldbus interface solutions profiling Device Couplersand Power Supply Modules. Speaker: Vincent Marchant, MooreIndustries. Networking 5:00; Program 5:30; Location: Gas Company’sEnergy Resource Center, Downey. Pizza if you RSVP: Joan Chang [email protected] or 626 795-8144. Section website: www.isala.org.

Cal Poly Pomona Student Section President - Saif Rawas, [email protected], (909) 802-0159

For more info, contact Saif Rawas above.

Section Meetings, continued on page 13

November 2006 ISA Newsletters, Southern District 11 9

Regional eventsDates are subject to change. Always contact thesponsoring party before making your final plans toattend. To include an event or make a correction,please contact the editor.

November 7, 2006Instrumentation PhysicsTraining Class. Energy ResourceCenter; www.isala.org

November 9-10, 2006Remote Monitoring & Network-ing and Onsite Power 2006Westin Long Beach (800) 803-9488

November 12-17, 2006American Institute of ChemicalEngineers (AIChE) AnnualMeeting, San Francisco Hilton, SanFrancisco, www.aiche.org

November 21, 2006Instrumentation CalibrationTraining Lab. Energy ResourceCenter; www.isala.org

November 28, 2006Flow, Temperature, Pressure &Level Instrumentation andApplications Training Class.Energy Resource Centerwww.isala.org

November 2006National Chemistry WeekAmerican Chemical Societywww.chemistry.org

December 9, 2006Orange County / Los AngelesChristmas Party and AwardsCeremony. Ramada Inn Suites, ElMonte. www.isala.org

February 13-15, 2007Pacific Design & Mfg Show,Anaheim Convention Center,www.pacdesignshow.com

February 22, 2007INSTRUMENTATION 2007Exposition and Technical Training,Carson Convention Center, Carson,www.isala.org

February 22, 2007CCST Review Class CarsonConvention Center, Carson,www.isala.org

March 1, 2007Analytical Instrumentation, ISASymbols and Math for Instru-mentation. Energy ResourceCenter, Downey. www.isala.org.

March 8, 2007CEMS Calibration andMaintenance Training Class.Energy Resource Center, Downey.www.isala.org.

February 22-25, 2007National Fluid Power Associa-tion (NFPA) Spring Conferenceand Annual Meeting, La Quinta,Palm Springs, www.nfpa.com

April 1-4, 2007American Association ofPetroleum Geologists (AAPG)Annual Convention, Long Beach,www.aapg.org

April 11-15, 2007National Association of PipeCoating Applicators (NAPCA)Annual Convention, Indian Wells(318) 227-2769 www.napca.com

June 2007National Propane Gas Associa-tion (NPGA) Annual Meeting &Educational Conference, Las Vegas,NV (202) 466-7200 www.npga.org

June 6-7, 2007Association of Energy Engineers(AEE) West Coast EnergyManagement Congress, Long BeachConvention Center, (770) 447-5083www.aeecenter.org

October 2007ISA EXPO 2007Houston

10 ISA Newsletters, Southern District 11 November 2006

The holiday season will beapproaching soon and the jointISALA/ISAOC Annual ChristmasDinner and Awards ceremony isscheduled for Saturday, December 9,2006. As in previous years, we arelooking for sponsors for the Christ-mas party. The event will take placeat the Ramada Inn Suites and Hotel,1089 Santa Anita Avenue, South ElMonte.

This event will include a dinner,raffles, silent auction, casino gambling,a wonderful holiday atmosphere andlots of fun!!! Your participation andsupport of your local chapter is essential to its livelihood, therefore,your sponsorship and/or gift(s) would be greatly appreciated. Thereare three levels of sponsorship that are available.

Level 1: Tables of 10 are available for sponsorship at $700 but ifyou submit payment before October 1st, the cost is reduced to only$550.00. Also, please also submit a raffle prize. In return for yourdonation, a placard with your company name will be on the table andyou will be able to entertain 10 people with the evening’s festivities.

Level 2: Casino table sponsorships are available for $400 andsubmitting a raffle prize. If payment is submitted by October 1st,sponsorship is reduced to only $300. In return for your donation,your company’s name will be prominently displayed on one of thecasino tables, with room to place business cards. You will also receivetwo tickets for the event so you and a guest can enjoy all of the night’sactivities.

The Christmas Party is coming!

Level 3: Sponsoring door prizes or a “silent auction” item for$100 (or more) is an excellent way to show support in any denomina-tion. Your gift of a donated prize(s) or a cash/check which will beused to purchase raffle prizes would be greatly appreciated. Yourcompanies name will be placed on the prize and will be promoted whilethe prize is being raffled or auctioned off. See supplemental page formore information on raffle prizes and silent auctions.

Please note that tables sell out fast and casino table sponsorshipsare limited, so your quick and timely response is urgently requested!!!ISA LA and ISA OC appreciate your help to make this event evenbetter than before.

For more information about the event, please contact SarahSheldon at (949) 349-8750, [email protected] or Linda Meyersat (626) 571-2770 extension 128, [email protected].

Orange County & Los Angeles Sections

Internet tip of the month

What Is RSS?The term “RSS” is appearing all over now, and it can be a good way

to keep up with new information. The following from the US Govern-ment website, www.firstgov.gov gives a basic introduction to this newtool.

What Is RSS?RSS stands for Really Simple Syndication. It’s an easy way for you

to keep up with information that’s important to you, and helps youavoid the conventional methods of browsing or searching for informationon websites. Now the content you want can be delivered directly to youwithout cluttering your inbox with e-mail messages. This content iscalled a “feed.”

RSS is written in the Internet coding language known as XML(eXtensible Markup Language), which is why you see RSS buttonscommonly labeled with the icon “XML.”

What Is an RSS Reader?An RSS reader is a small software program that collects and

displays RSS feeds. It allows you to scan headlines from a number ofnews sources in a central location.

Where Can I Get an RSS Reader?Some browsers, such as the current versions of Firefox and Safari

have built in RSS readers. If you’re using a browser that doesn’tcurrently support RSS, there are a variety of RSS readers available onthe web; some are free to download and others are available for pur-chase.

How Do I Use RSS Feeds?The first step is to choose an RSS reader. Each reader has a slightly

different way of adding a new feed, also called a “channel.” Follow thedirections for your reader but, in most cases, here’s how it works:

* Click on the link or small XML button near the feed you want.For example, FirstGov.gov Updates: News and Features. You’ll see apage displaying XML code.

* From your web browser’s address bar, copy the URL (webaddress). For example, the URL you would copy for FirstGov.govUpdates: News and Features is: http://www.firstgov.gov/rss/updates.xml.

* Paste that URL into the “Add New Channel” section of thereader. The RSS feed will start to display and regularly update theheadlines for you.

How to subscribe to FirstGov.gov RSS Feeds* Subscribe to the FirstGov.gov Updates - News and Features RSS

Feed - Stay on top of important government news and information withthe FirstGov.gov Updates RSS feed. We’ll revise this feed when we addnews and featured content on the FirstGov.gov website.

* Subscribe to the Popular Government Questions fromFirstGov.gov RSS Feed - Our government questions RSS feed will keepyou informed with the most popular and useful questions and answersrelated to the U.S. government from our frequently asked questionsdatabase. Our database contains thousands of answers to the questionsthe public asks our 1 (800) FED INFO call center.

Source: www.firstgov.gov

November 2006 ISA Newsletters, Southern District 11 11

Process Control and Distributed I/O

Signal Transmitters and Converters

Isolators, Splitters and Repeaters

Temperature Sensors and Transmitters

Limit Alarms, Trips and Switches

Process Controllers, Monitors and Backup Stations

Smart HART® Loop Monitors and Interfaces

I/P and P/I Pneumatic Converters

AC Power Transducers and Monitors

Indicators and Displays

Instrument Power Supplies

Enclosure Systems, Racks and Rails

Complementary Accessories

The Interface Solution ExpertsWhen you need to interface field processes with computer-based systems,readout equipment and other instrumentation... our technology, service andexpertise help you do it efficiently, safely and cost-effectively.

Temperature • Level • FlowPressure • Status

Monitor • Display • AlarmRecord • Control

Represented By: Patten Systems, Inc.Tel: (714) 799-5656 • FAX: (714) 799-5353E-mail: [email protected]

Patten BW AD 2006.pmd 9/26/2006, 2:29 PM1November 2006 ISA Newsletters, Southern District 11

By Linda Meyers, Product Manager George Fischer Signet, Inc.

“Units of Operation” is a term that describes a common processthat can be found among many industrial plants. Engineers design aplant with these units in mind, as the units make up a good portion ofthe facility and usually have specific functions such as mixing, neutraliz-ing, or separation of fluids. Other common units include (but are notlimited to), cooling towers, boilers, scrubbers, and chemical injectionsystems. An entire plant can be built with numerous units combinedwith more specific processes for each individual application.

In last month’s newsletter, deionization methods and systems werediscussed. Because deionized water has very low mineral content, it iscommonly used in the beginning or middle stages of a productionprocess. At the end of the production cycle, dirty wastewater iscollected, treated, and discharged. Due to environmental issues, localwater authorities require the neutralization of industrial wastewaterdischarge to protect the ecological systems in the surrounding lakes,rivers, and oceans, or to protect the local sewer networks and treatmentplant. So, this month’s discussion will focus on wastewater neutraliza-tion.

The wastewater neutralization process can be complex anddifferent for each industrial location. The use of acidic and causticchemicals to neutralize the discharge is common practice among manyindustries since they are both inexpensive and effective. Each facilitymust have a good understanding of the wastewater chemical make up,

Application Notes

Units of operation: Waste water neutralizationprocesses

buffering capacity (alkalinity), flow rate, and sewer discharge require-ments (pH, suspended solids, dissolved solids etc.) in order to select theproper chemical neutralization treatment program.

It is most effective to perform the neutralization process in a tankrather than in a pipe at the final process or discharge. The constructionof the neutralization tank should include a pH sensor that is mounted in

Continued on page 13

11

12 ISA Newsletters, Southern District 11 November 2006

Professional Training & Advancement

PLC, instrumentation, CCST training series

A series of instrumentation courses hasbeen scheduled this year by the Los AngelesSection. Classes will be held on weekdayevenings. Each course will consist of nine

classroom and lab hours. Courses will beconducted by professional instrumentationtrainers and are not product specific. Profes-sional Development Certificates will be awardedto attendees.

Instrumentation Level 1Training This course consists of threeevenings. This class will give anyonenew to the industry basic practicalworking knowledge in the areas offlow, temperature, pressure and levelinstrumentation. Some of the practicalthings you will learn include how tospecify and order thermocouples,flowmeters and other instrumentationdevices. Instructors: Neil Finch, KevinO’Neill and Gary Penny. Two of 20 seats werestill open as of October 27th.- Tues, Nov 7 - Instrumentation Physics- Tues, Nov 21 - Calibration Practices &Training Lab- Tues, Nov 28 - Detailed Review of Flow,Temperature, Pressure & Level Instrumentationand Applications

CCST Review andInstrumentation Level 2 Training This course consists of three evenings. Thefirst session will be held February 22nd at theCarson Convention Center in conjunction withInstrumentation 2007. Instructors: Neil Finchand Gary Penny. Five of 20 seats were stillopen as of October 1st.- Thurs, Feb 22 - CCST Review)- Thurs, Mar 1 - Analytical Instrumentation,ISA Symbols and Math for Instrumentation- Thurs, Mar 8 - CEMS Calibration andMaintenance

Basic-to-Advanced PLCProgramming This popular course was sold out inSeptember and is again being offered again due.A hands-on session using student laptops as thetraining tool, each student will use an instruc-tional aid to program a live simulation on theircomputer. There will also be review of program-ming components to enlighten even an experi-enced technician and increase his experience

level. 9 hours total training. A RSLogix PLCSimulator and ProSim-II Simulation disc will beprovided as part of the package. Students willneed to bring their own laptop computer.Instructors: Orlando Manahan and Neil Finch.This course will be limited to twenty students.- Tues, May 8 - Introduction to PLC Program-ming and Lab- Tues, May 15 - Practical Programming andLab- Tues, May 22 - More Programming and Lab

Who should attend? Those whoneed to get up to speed on currentinstrumentation technology shouldattend. This series of training classesis not just for the experienced engineerand technician, but will be valuable forinstrument sales people, projectmanagers as well as for those new tothe field. After taking this course,attendees will better understand howto assess, compare and select thevarious methods of measurement andcontrol.

What are the class materials?The basic registration fee include a PLC trainingCD and supporting documentation. In addition,the textbook, Condensed Handbook of Mea-surement and Control, 2nd Edition, by N.E.Battikha, will be available free of charge to allthose who mail payment for all three session sby October 13. After that date, the book will beoffered at $62 for members and $68 for non-members, which is 10% off ISA’s normal price.Or you can purchase the book directly from ISAat full prine. A direct link to this book can befound at the training link under “What’s New”at www.isala.org.

What is the cost? This training isopen to everyone — registration fee for ISA LosAngeles members is $150 per session or $365for all three. Add $15 per class if a member ofanother section. For non-members, $195 persession or $450 for all three ($450 includes aone-year membership in ISA, an $85 value). Aspecial rate is offered for full-time students - callfor information. There will be a small charge forclass materials for each course.

Where will it be held? All courseswill be held at the Gas Company’s EnergyResource Center in Downey, except for the Feb22 session, which will be held at Instrumenta-tion 2007 at the Carson Convention Center.

For more information and to sign up,please contact Neil Finch at (951) 675-3395 [email protected], or see the ISA LosAngeles Section website, www.isala.org.

November 2006 ISA Newsletters, Southern District 11 13

PROCESS MEASUREMENT & CONTROL SOLUTIONS

Process Level Measurement

Industrial Flowmeters

Gas & Liquid Analyzers

Pipeline Strainers & Bag Filters Gas/Liquid Separators

TeledyneAnalytical Instruments

Gas Mass Flowmeters

Ultrasonic Flowmeters

Gas & Flame Detection

BAKERSFIELD BRANCHTel 661.391.1000 ✦ Fax 661.391.0990

ANAHEIM HILLS CORPORATETel 714.282.5600 ✦ Fax 714.282.7874

[email protected] ✦ www.jprsi.com

Tank Gauging & Systems

V-Cone & Process Flowmeters

Measurement & Instruments

Invensys

Instrumentation Products

Heat Tracing Products & Services

Thermal Controls

Coriolis Mass Flowmeters

Flow/Level/Temp Switches

a position that allows easy removal of the sensor for periodic mainte-nance and calibration. The tank will also commonly have a mixing motorand chemical injection pumps located opposite of the pH sensor.

Sensors that measure pH are crucial in the neutralization process;however, all pH sensors are not the same. Many neutralization processescontain materials or chemicals that can cause premature senor failure bycontamination of the internal reference solution. In these cases, a morerugged sensor, such as one with a differential reference, will extend thelife of the sensor.

Besides pH, other measurements in the neutralization processinclude flow, ORP, conductivity, and level. Flow is measured to Trackthe amount of influent water being treated and enables recordings of theamount of processed waste water being discharged to the sewer. ORPmeasurements monitor the disinfection ability of the chlorine that may beinjected into the wastewater. Conductivity may be monitored to adjustconductivity levels being discharged to the sewer, preventing high saltpollution. Level measurements are commonly done in the chemical andneutralization tanks.

Keeping in the theme of cleaning water, next month’s Unit ofOperations article will look at disinfection by the use of ozone.

Linda Meyers is the Special Events Chair of the Los Angeles Section.She can be reached at [email protected] or (626) 571-2770. Graphics and description courtesy of George Fischer Signet, Inc.Visit www.gfsignet.com for more application information.

Wastewater neutralizationprocesses, continued from page 11

Industry News

Section Meetings, continued from page 8

San Diego See Website President - Alex Bates, [email protected], (858) 531-3886.

Please see website: www.isa.org/community/sandi. or www.isasd.org.

Las Vegas See Website President - Mike Bridenberg, [email protected]

The usual meeting date is the 4th Thursday of the month. Note: SkinnyDugan’s Pub is no longer the regular meeting place. Please see website:www.isa.org.~lasve.

Instrumentation & Analyzer Technicians. Perform repairs,calibration, preventative maintenance with a minimum of supervisionon all types of electrical, instrumentation, and plant analyticalequipment. Installation of wiring, instrumentation and control systemequipment. Experience with PLC programming, graphical interfacesoftware desirable but not required. Ability to work from electricalschematics, mechanical drawings. Will work from home and coverSouthern California. Full-time, part-time or contract openings. Noovernight travel. Please contact John Prince at APG Analyzer Systems,at (714) 968-5501 or apply through website - wwwCalCEMS.com.

Job Shop

Manufacturers Representative. MCR Technologies a manufactur-ers representative covering Southern California and Southern Nevadais seeking qualified outside sales person with 3+ years of salesexperience in the instrumentation field. Competitive salary andbonus, Health, Dental, Vision, Life insurance benefits. Forwardresume to [email protected] or fax to 949-830-2390.

Environmental Engineer. Develop procedures, conduct training andaudits, interface with regulatory agencies. Manage RCRA and HazardousMaterial Programs, including HMP, RMP, SPCC and SARA 313.Develop waste minimization strategies. Maintain compliance with local,state and federal hazardous waste and hazardous material regulations,including RCRA and CAL-EPA. BS Degree in Environmental Eng. (orrelevant) and at least 5 yrs. exp. Exp. in the chemical or pharmaceuticalindustry a plus. Ampac Fine Chemicals / HR (916) 355-3725.

Outside Sales Position. Valin is interviewing for an immediate outsidesales position covering a territory that includes Los Angeles and OrangeCounties. The position has specific focus on the petrochemical andengineering contractor markets. Candidates should have experience sellingvalve and instrumentation products. Please contact the following formore information: Greg Neneman at [email protected] or John Hill [email protected]. You may also find out more about Valin Corporation atvalinonline.com.

Industrial Instrument Technician. Journeyman level instrumenttechnician. Applicant must show experience with setting-up, installing,running, troubleshooting industrial process control loops, configuring andtroubleshooting DCS. Knowledge in the installation, calibrating, andrepairing of the following pneumatic and smart field instruments:pressure, flow, temp, level, analytical transmitters, value positioners,valve actuators, printers, scanners and PID controllers. Requires highschool diploma or GED. Mail resume to Industrial Instr Tech 0602, c/oTechPubs Communications, PO Box 1605, Costa Mesa, CA 92628.

Sales Engineer Position. SurelokTM, a business unit of cMAX-2000,Inc., is seeking experienced sales engineers, for the sales of tube fittings,face seal and weld fittings to the industrial customers such as manufac-turers of Analytical Instruments, Gas Analyzers, Gas Panels, Gasregulators, etc., in Southern California. We offer a reasonable base salaryand attractive sales commission to results oriented persons. Forwardresume to [email protected] or fax to (951) 688-1885.

Industrial Sales Position. JPR Systems, a Manufacturer’s Representa-tive for Process Instrumentation and Heat Tracing has an immediateopening for a Technical Sales Engineer to support and expand anestablished territory in Bakersfield and surrounding counties. Prefer 2+yrs industrial field sales exp. but will also consider strong processindustry background. Position includes a competitive salary pluscommission plan, expenses, benefits package. Please submit resume inconfidence to JPR Systems Inc., Fax: (714) 282-7874 or [email protected].

JOB WANTED: Engineer/Consultant with a B.S. in IndustrialEngineering seeking a position that requires the use of mathematicalsciences, engineering, and economics for cost estimation and managerialdecision-making in Los Angeles, Orange or San Diego Counties. Twoyears relevant work experience includes economic and business analysisconsulting and systems engineering for DoD clients. Active DoD secretsecurity clearance. Computer skills include: Automated Cost EstimatingIntegrated Tools (ACEIT); Arena 7.0; AutoCAD; C++; DOORS; ExpertChoice; Maple; MatLab; Microsoft Office; Surfcam. Will email resumeand references upon request. Contact Danielle Brisky at (703) 946-5083or [email protected].

Process Engineer. Vigilistics provides systems for the foodprocessing industry, and is seeking Process Engineers for implementa-tion projects. The ideal candidate has experience configuring RockwellPLC-5 and Control Logix, and understands Batch Process Control.Experience working with food processing systems is a plus. Experi-ence programming HMI’s is another plus. Understanding Batch S-88models is a big plus. The candidate should enjoy working in an early-stage fast-growth environment, where hard work and good work leadto career advancement and rewards. The expected background is threeyears or more in a process plant or with a systems vendor workingwith batch processing systems including programming PLC’s. Travelestimated at 25% of the time, USA. Contact Robert Moore [email protected], Vigilistics, Inc., 23361 Madero, MissionViejo, CA 92691.

Circulation is approximately 1,500 ISA members and other industrypersonnel. To place an ad, please contact the newsletter editor.

Instrumentation-Field Service Technician. Primary responsi-bilities include installing, maintaining and repairing Micro Motionand Rosemount Measurement & Flow instruments, products, andsystems. Individual will build customer relationships throughsolutions-oriented communications and service, providing both on-site and telephone support, and remain on an on-call status viapager. Extensive travel is required. 3 to 5 years experience inCustomer Service and/or Field Service role in the process industry.Previous knowledge of Micro Motion and Rosemount products aplus. Strong desire to serve customers, work with others, and aproven ability to work with customers under challenging circum-stances a must. Send Resumes [email protected].

14 ISA Newsletters, Southern District 11 November 2006

November 2006 ISA Newsletters, Southern District 11 15

Electro-Mechanical Engineer/Technician. Automation companyneeds Engineer/Technician experienced with computer and PLC con-trolled equipment comprised of multi-axis motor control, pneumaticactuators, machine control, and feedback elements including analog &digital inputs, encoders, photo-electrics, vision systems. Must under-stand PC/PLC software, HW/SW interfaces and be able to identify andisolate electrical, software, or mechanical problems. Will assist withdesign & assembly of new systems as well as installation, field service &support. Salary commensurate with experience. Email resume [email protected].

14978 Sand Canyon Ave., Suite C

Irvine, CA 92618

Office: 949-559-1941

Fax: 949-653-2420

www.goldenstatecontrols.com

Instrumentation and

Control Systems for

Southern California,

Nevada and Hawaii

Golden State Controls and Invensys FoxboroWe are the authorized Representative for the Foxboro Systems

group. We now support the full range of Foxboro control systems

including IA and A Squared. Please call us for information, support

and service.

Control Systems

Golden State Controls is affiliated with Western States Controls’

Professional Services Group that provides engineering and technical

solutions to process control systems and instrumentation.

Instrumentation

Rotameters

Sub-Distributor for

G M Cooke, Inc.

Distributor

_______________________________

Control Valves

PLC Programmer. PLC’s Plus International, Inc. has immediateopenings for PLC Programmers. Petroleum, Manufacturing, Water/WasteWater, Food, Beverage and, Power. Competitive Salary, Vacation, Health,Life, Disability, Dental, Vision, 401k, 125. Join a long established and,growing company who offers work in a team environment. We offermany training opportunities to enhance your skill set and learn newthings, and we reward those who grow their professional and technicalskills. Send resume to PO Box 20238, Bakersfield, CA 93390. [email protected].

Job Shop continued from previous page

well as theory in electronic and electrical circuitry and digital andmicroprocessing computers.

Good communication skills, both oral and written, are necessarysince reports and verbal explanations are usually part of the job. The jobalso requires good manual dexterity, good vision, and color perception.

Technicians who are graduates of qualified technical institutes maybecome certified by organizations such as the Institute for the Certifica-tion of Engineering Technicians. They may also become members of theInstrument Society of America and similar professional societies.Membership in such organizations is not mandatory but serves as a goodway to keep informed of advancing technology.Advancement

Instrumentation Technicians who demonstrate skill and leadershipmay be promoted to supervisory-level positions. Those who continuetheir formal education and earn at least a Bachelor of Science degree mayadvance to a wide range of professional engineering positions.Finding the Job

Applicants for technician positions should contact employersdirectly, and should respond to want ads in local newspapers or tradejournals. In addition, some employers frequently list their openings withthe Job Service offices of the California Employment DevelopmentDepartment. Additional sources and other information about instrumen-tation technician issues can be found through ISA at (919) 549-8411 orwww.isa.org.

This article is excerpted from the California Employment Develop-ment Dept, California Occupational Guide Number 485;www.calmis.cahwnet.gov. Direct link to this page: http://tinyurl.com/J3RHF

Careers Update, continued from page 15

16 ISA Newsletters, Southern District 11 November 2006

ISA Section Newsletterc/o TechPubs CommunicationsPO Box 1605Costa Mesa, CA 92628

FIRST CLASSFIRST CLASSFIRST CLASSFIRST CLASSFIRST CLASSPOSTAGE

PAIDSANTA ANA, CAPERMIT NO. 660

FIRST CLASS MAIL

ADVERTISERS INDEX

Free ISA Webinars All regular members now have free, unlimited access to viewing all archived ISA web seminars. For info, see www.isa.org or call ISA at (919) 549-8411.

Instrumentation 2007 Carson Convention Center Feb 22, 2007 For info, see page 5

InstrumentationTraining Nov. 7, 21, 28, 2006 For info, see page 12

Blair-Martin Co. ............................................... 13Caltrol, Inc .......................................................... 5Capital Westward Systems & Controls ............. 7Electrical Systems Limited ............................... 12Emerson Process Management .......................... 5George Fischer Signet ......................................... 9Golden State Controls ...................................... 15Hach Company .................................................. 3Jensen Instrument ............................................ 15JPR Systems .................................................... 13MCR Technologies, Inc. .................................... 8Moore Industries .................................. Insert, 11Patten Systems, Inc. .......................................... 8Precision Instrumentation .................................. 7Tescom ................................................................ 4Valin Corporation ............................................... 6WestMark Sales, Inc. ....................................... 16Wilmington Instrument. .............................. Insert

IMPORTANT! Please check your membershiplisting online for accuracy for the 2007 MembersDirectory & Buyers Guide. See more on front page.

Is your company listed in the

2007 Southern California/Nevada

Directory & Buyers Guide?

For more info, see page 1.