– 1 –A-7332-1EX

© 2016 Icom Inc.

• Transceiver An ID-51A or ID-51E with a serial number label

that has “PLUS2” printed on it.L The illustration below is for the ID-51A version.

• Operating System (OS) Microsoft® Windows Vista® (32/64bit) Microsoft® Windows® 7 (32/64bit) Microsoft® Windows® 8.1 (32/64bit)* Microsoft® Windows® 10 (32/64bit) * Except for Microsoft® Windows® RT.

• Others Required items differ, depending on the setup

method.

When using a microSD card • microSD card (User supplied) • Memory card reader (User supplied)

or Memory card slot built into the PC to read the microSD cardLSee page 3 for detailed instructions.

When using an optional data cable

• OPC-2218LU data cable or OPC-2350LU data cable • A USB 1.1 or 2.0 portLSee page 6 for detailed instructions.

INSTRUCTION MANUALCLONING SOFTWARE

CS-51PLUS2 Thank you for choosing this Icom product. READ ALL INSTRUCTIONS carefully and completely before using this product.

System requirements

The CS-51PLUS2 is a software application to setup the ID-51A or ID-51E from your PC.You can set Memory channels, scan settings, call signs, repeater list, and other settings.To use the software, a computer system and some items described in “System requirements” are required.LThe instructions are based on using Microsoft® Windows® 7.

– 2 –A-7332-1EX

© 2016 Icom Inc.

1. Log in as the administrator.L BE SURE no other applications are running.

2. Insert the CD into a CD drive.3. Double-click “Menu.exe” on the CD.L Depending on the PC setting, the Menu screen

shown below is automatically displayed.

ID-51Menu screen

Installs theCS-51PLUS2

4. Click “Cloning software Installer.”L If “User Account Control” is displayed, click <Yes> to

continue.5. “Choose Setup Language” is displayed.

Select “English” or “Japanese,” and then click <Next>>.L In this document, “English” is selected.

Click

Select language

6. “Welcome to the InstallShield Wizard for CS-51PLUS2” is displayed, and then click <Next>>.

Click

7. “Choose Destination Location” is displayed, and then click <Next>>.L If desired, click <Browse...> to select another

destination folder before clicking <Next >>.

Click

Confirm

8. After the installation is completed, “InstallShield Wizard Complete” is displayed, and then click <Finish>.

Click

9. Click “Quit” on the Menu screen.10. Eject the CD.11. A program group “CS-51PLUS2” is created on

the program menu, and a “CS-51PLUS2” shortcut icon is created on the desktop.L You can uninstall the cloning software using

“Uninstall a program” in the Windows Control Panel.

TIP:See the Help file of the cloning software for assistance with the functions or settings.To open the Help file, click “Help” in the top menu of the cloning software and select “Contents,” or simply push the [F1] key of the PC’s keyboard.

Installing the cloning software

– 3 –A-7332-1EX

© 2016 Icom Inc.

To setup from a PC using a microSD card, follow the steps described below.Step 1 Insert a microSD card into your PC’s card reader or card slot.Step 2 Make the Initial setup.Step 3 Setup. (p. 5)

Setting up from a PC using a microSD card

NOTE:The microSD and microSDHC cards are not available from Icom.

Icom has checked the compatibility with the following microSD and microSDHC cards.

(As of September 2016)Brand Type Memory size

SanDisk®

microSD 2 GB

microSDHC

4 GB8 GB16 GB32 GB

L Through the rest of this document, the microSD card and a microSDHC card are simply called microSD cards.

L The microSD cards listed to the left are usable with the ID-51 series transceivers, but their specifications are not guaranteed by Icom.

DAbout a microSD card

DProcedure outline

DSetting up precautions

• To prevent data loss, you should first copy the transceiver's setting data from the microSD card to the PC. After copying, read the data into the cloning software, and enter or edit parameters using the cloning software. • Before editing or entering new data, make a backup file onto your PC. A backup file enables easy restoring even if the setting data in the microSD card is accidentally deleted.

• BE SURE to turn OFF the transceiver before inserting or removing the microSD card. • DO NOT remove the microSD card, detach the battery pack, or turn OFF the transceiver, while reading or writing data to or from the microSD card. Otherwise, the data could be lost or corrupted.

A-7332-1EX© 2016 Icom Inc.

– 4 –

Setting up from a PC using a microSD card (Continued)

DBefore starting the CS-51PLUS2 setup

1. Make a backup file.L Save the transceiver’s setting data onto the

microSD card. Open the “Save Setting” on the transceiver’s MENU screen to save.

(MENU > SD Card > Save Setting)2. Turn OFF the transceiver, and remove the

microSD card.3. Insert the card into the microSD card slot of the

PC or the microSD card reader, as shown below.4. Copy the transceiver’s setting data (ICF file),

stored in the “Setting” folder of the card to a PC local folder.

• About the microSD card’s folder composition

To the Card reader To the Card slot

PC PC

microSDcard

Transceiver

or

The folder composition on the microSD card is shown to the right.The transceiver’s setting data (ICF file) is stored in the “Setting” folder.

ID-51

Gps

Csv

Reply

QsoLog

RxLog

Setting

Voice

VoiceRec

VoiceTx

DMaking the Initial setup

When you start the CS-51PLUS2, the Initial Setup window is displayed. Before using the software, follow the steps below to make the initial setup to send the transceiver version information.

NOTE: When the transceiver version information is not correctly sent to the software, some items may not be displayed on the software.

1. Click the “microSD” radio button.2. Click <Open...> to display the data file selection

window. 3. Select the setting data (ICF file) copied from the

transceiver in step 4 of “Before starting the CS-51PLUS2 setup,” as described above.

4. Click <OK> to open the software and read the selected file.

Click

ClickClick

NOTE: If you use a brand new microSD card, first format the card using the transceiver.See section 2 of the ID-51A and ID-51E Basic manual for details.

– 5 –A-7332-1EX

© 2016 Icom Inc.

DHow to setup the transceiver

Follow the steps below to write the setting data that is edited with the CS-51PLUS2 to the transceiver using the microSD card.

1. Set Memory channels, scan settings, call signs, repeater list, and other settings using the CS-51PLUS2.

2. Save the setting data in an Icom Cloning Format (ICF) file format in a folder on your PC.L See the Help file of the CS-51PLUS2 for assistance.

3. Copy the setting data (ICF file) into the “Setting” folder in the “ID-51” folder on the microSD card, as shown to the right.

4. Insert the microSD card that includes the setting data (ICF file) into the slot of the transceiver, then load it to complete the set up.

(MENU > SD card > Load Setting)

NOTE: • After loading, the contents of the setting data overwrites the current data. • The loading contents can be selected between “ALL,” “Except My Station,” and “Repeater List Only.” When you want to load only the repeater list into the transceiver, select “Repeater List Only.” • The original skip settings in your repeater list can be kept when loading. When “Keep ‘USE (FROM)’ settings in the Repeater List?” is displayed, select <Yes> to keep the skip settings in the repeater list. • See section 2 of the ID-51A and ID-51E Advanced manual for details.

5. Turn OFF the transceiver, then turn it ON again to operate the transceiver with the loaded data.

Open the “Setting” folder on the microSD card

Double-click

Copy the ICF file here

Setting up from a PC using a microSD card (Continued)

Double-click

– 6 –A-7332-1EX

© 2016 Icom Inc.

To setup from a PC using the OPC-2218LU or OPC-2350LU, follow the steps described below.Step 1 Connect the transceiver and PC using a data cable.Step 2 Make the Initial setup.Step 3 Setup. (p. 8)

Setting up from a PC using a data cable

Before you use the OPC-2218LU data cable or the OPC-2350LU data cable, you must install its USB driver. The latest USB driver and installation guide can be downloaded from “Options” section towards the bottom of the firmware page on the Icom website.

Carefully read the guide, before installing the driver.http://www.icom.co.jp/world/support/download/firm/

NOTE for the OPC-2218LU: DO NOT connect the transceiver to the PC with the OPC-2218LU until the USB driver installation has been completed.The driver is not supported by the Windows®

automatic recognition system.

DProcedure outline

DSetting up precautions

• To prevent data loss, you should first read all the transceiver’s setting data into the cloning software. After that, enter or edit parameters using the cloning software. If you write the setting data into your transceiver before reading, the settings such as “My Call Sign” or “Your Call Sign” is overwritten.

• Before editing or entering, make a backup file onto your PC. A backup file enables easy restoring even if the setting data in the transceiver is accidentally deleted. • DO NOT turn OFF the transceiver or the PC, and DO NOT disconnect the cable while reading or writing setting data. Otherwise, the data could be lost or deleted.

DUSB driver installation

A-7332-1EX© 2016 Icom Inc.

– 7 –

1. Install the USB driver. (p. 6)2. Turn OFF the transceiver.3. Connect the data cable, as shown to the right.4. Turn ON the transceiver.5. Push [MENU] on the transceiver and enter the

Clone Mode. (MENU > Others > Clone > Clone Mode)6. Make a backup file.L Click , or select “Read ← TR” in the <Clone>

menu to read the setting data from the transceiver.L Click “Save As...” in the <File> menu of the

CS-51PLUS2 to save the backup file to a folder on your PC.

DBefore starting the CS-51PLUS2 setup

PC

To [DATA]jack OPC-2218LU

To a USB port

To a USB port

OPC-2350LU

IMPORTANT:Before reading or writing setting data, the “DV Data TX” setting of the transceiver must be set to “PTT.” Otherwise, when data is input from a PC through the [DATA] jack, the transceiver automatically transmits it.(MENU > DV Set > DV Data TX)

Setting up from a PC using a data cable (Continued)

DMaking the Initial setup

When you start the CS-51PLUS2, the Initial Setup window is displayed. Before using the software, follow the steps below to make the initial setup to send the transceiver version information.

NOTE: When the transceiver version information is not correctly sent to the software, some items may not be displayed on the software.

1. Click the “COM Port” radio button.2. Select the correct COM port number from the

drop-down list, or directly enter the COM port number into the box.L See the “USB Driver Installation Guide” that can

be downloaded from the Icom website to check the COM port. http://www.icom.co.jp/world/support/download/firm/

3. Click <OK> to open the software.

Click

Click

– 8 –A-7332-1EX

© 2016 Icom Inc.

DHow to setup the transceiver

Follow the steps below to write the setting data that is edited with the CS-51PLUS2 to the transceiver using a data cable.

1. Push [MENU] on the transceiver and enter the Clone Mode.

(MENU > Others > Clone > Clone Mode)2. Click , or select “Read ← TR” in the <Clone>

menu to read the data from the transceiver.TIP: If you have an ICF file to write to the transceiver, click or select “Open Ctrl+O” in the <File> menu, and then select the file.

3. Set Memory channels, scan settings, call signs, repeater list, and other settings using the CS-51PLUS2, and then save them in an Icom Cloning Format (ICF) file format in a folder on your PC.L See the Help file of the CS-51PLUS2 for details.

4. Click , or select “Write → TR” in the <Clone> menu to write the setting data into your transceiver.NOTE: The entered data will overwrite the current data.

5. After the writing is completed, turn OFF the transceiver, then turn it ON again to operate the transceiver with the edited setting data.

When the PC starts reading the setting data from the transceiver.

The transceiver’s display

When the PC starts writing the edited setting data into the transceiver.

Setup is completed.

The Clone Mode display

Setting up from a PC using a data cable (Continued)

– 9 –A-7332-1EX

© 2016 Icom Inc.

Downloading thelatest ICF file and CSV files

Editing the settings file using the CS-51PLUS2

This section describes how to edit and save the settings using the CS-51PLUS2.The file format is Icom Cloning Format (ICF).

1. Editing the ICF fileBefore using this software, make a initial setup to send the transceiver version information to the software. (pp. 3, 5)

1. Click or select “Open Ctrl+O” in the <File> menu of the CS-51PLUS2 to open the ICF file.

2. Edit necessary setting for each function, using the CS-51PLUS2.L See the Help file of the CS-51PLUS2 for assistance.

2. Saving the ICF file Click or select “Save Ctrl+S” or “Save As...” in the <File> menu of the CS-51PLUS2 to save the edited settings file to a folder on your PC.

NOTE: About the saved file format • The settings saved in the ID-51PLUS2 format cannot be written to the ID-51or ID-51PLUS transceivers. • If the settings file is saved in an ID-51 or ID-51PLUS format, the edited or added entries in the ID-51PLULS2 are not saved.

NOTE: To reset the settings of the transceiver to their default values, copy the ICF file contained in the “Preset” folder of the supplied CD, to a local PC folder, and then write it to the transceiver.

Download the Zip file containing the latest Comma Separated Values (CSV) files and the ICF file from the Icom website:http://www.icom.co.jp/world/support/download/firm/

1. Right-click on the downloaded compressed file and select “Extract All...” to unzip it.

A “51P2_USA_160913”* folder, for example, will be created on the same place where the downloaded file is saved.

• File Name: 51P2_USA_160913.zip

* “51P2_USA_160913.zip” is used as an example.

TIP:The downloaded ZIP file includes:For the ID-51A • Settings file (ICF file) • GPS memory (CSV file) • Repeater list (CSV file)

For the ID-51E • Settings file (ICF file) • Call channel (CSV file) • GPS memory (CSV file) • Repeater list (CSV file)

<Settings file (ICF file)>All setting data of the transceiver is saved in the ICF file. • See to the left to edit. • See pages 3 and 8 to set up.

File Name (Example): 51P2_USA_160913.icf

Depending on the version.

Depending on the updated file date.

<Each CSV file>The name of a CSV file represents the content. • See page 11 to edit. • See page 10 to import. • See page 11 to export.

File Name (Example): 51PUSARpt160913.csv

Depending on the type of a CSV file.

Depending on the version.

Depending on the updated file date.

2. Copy the ICF settings file and the CSV files contained in the downloaded ZIP file to a folder on your PC.

Depending on the version.

Depending on the updated file date.

– 10 –A-7332-1EX

© 2016 Icom Inc.

1. Reading the data from the transceiver Click , or select “Read ← TR” in the <Clone> menu to read the data from the transceiver.L Before importing, make a backup file of all the

transceiver’s data onto your PC to prevent data loss.

2. Importing a repeater list1. Select the “Repeater List” folder or double-click

on it to show each repeater group on the tree view screen.

Repeater group

<Tree view screen of the CS-51PLUS2>

“ Repeater List” folder

2. Click “Import” in the <File> menu, and then click “All....” • The repeater information in a CSV file is imported, and sorted into groups according to the group number.

NOTE: When “Group...” is selected, all repeater information in the file is imported into the repeater groups, selected in step 1.If you select the “Repeater List” folder in step 1, “Group...” cannot be selected.

3. Select the CSV file, saved in “Downloading the latest ICF file and CSV files” described on page 9, and then click <Open>.

Read this section before importing the repeater list in a Comma Separated Values (CSV) format file to the CS-51PLUS2.

NOTE:Other CSV files contained in the downloaded ZIP file can also be imported in the same procedure.

TIP: About the “USE (FROM)” settingSelect whether or not the repeater can be selected as an access repeater (FROM), when you rotate [DIAL].If you select <NO>, the repeater is not displayed in the “FROM” selection, and is skipped during a DR scan.

Importing the repeater list

4. “Import from the file” is displayed, and then click <OK>.L If you select <Cancel>, the importing is cancelled.

Click

5. “Keep ‘USE (FROM)’ settings in the Repeater List?” is displayed, and then click <Yes> or <No> to start importing.

Click

• Yes: The original “USE (FROM)” settings set in the CS-51PLUS2 are kept.

• No: All the “USE (FROM)” settings are replaced with the imported CSV files.

L See page 8 for details about how to write the imported repeater list to the transceiver.

L See page 11 for details about how to edit or export the repeater list.

NOTE: When the data cable is used, the settings, except the repeater list, can be retained by doing the following procedures.

– 11 –A-7332-1EX

© 2016 Icom Inc.1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan

1. Editing the Repeater list1. Select a repeater group in the “Repeater List”

folder on the tree view screen of the CS-51PLUS2.

2. Edit the necessary items in the repeater list.L See the Help file of the CS-51PLUS2 for details.

2. Exporting the Repeater list1. Select the “Repeater List” folder, or each repeater

group on the tree view screen.

“ Repeater List” folder

Repeater group

<Tree view screen of the CS-51PLUS2>

2. Click “Export” in the <File> menu, and then click “Group...” or “All....”

NOTE: If you select the “Repeater List” folder in step 1, “Group...” cannot be selected.

• Group...: Exports repeater information entered in only the selected group.

• All...: Exports repeater information entered in all groups.

3. Save the data in a CSV format file to a folder on your PC.

Read this section before editing and exporting the repeater list.

Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries.Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries.All other products or brands are registered trademarks or trademarks of their respective holders.

Editing and Exporting the repeater list