Upload
andres-cardona-franco
View
1.796
Download
1
Tags:
Embed Size (px)
Citation preview
Dent Clin N Am 51 (2007) 473–485
Clinical Steps to Predictable ColorManagement in AestheticRestorative Dentistry
Stephen J. Chu, DMD, MSD, CDTDepartment of Periodontics and Implant Dentistry, New York University College of Dentistry,
345 East 24th Street, New York, NY 10010, USA
The shade matching of a restoration is the critical final step in aestheticrestorative dentistry once morphology and occlusion are addressed. Thevariables in the dental treatment room and human error are recognized ob-stacles first divulged by Dr. Jack Preston at USC Dental School. Color isboth a science and an art, and can often be difficult to measure.
Conventional shade methods and technology by itself have limitations,because technicians require more visual information to interpret shade in-formation. Advances in technology have greatly elevated the likelihood ofa clinically acceptable shade match through accurate shade analysis, if prop-erly performed. After much research and clinical evaluation, this article ad-dresses a culmination of knowledge that embodies how the author perceivespredictable shade matching.
A step-by-step protocol to shade matching is comprehensively outlinedthrough a case study using a combination of technology-based instrumenta-tion, conventional techniques (ie, shade tabs), and reference photography:a wonderful way for predictable shade matching that, if performed properly,can limit costly remakes.
Predictable shade matching protocol
Step 1: evaluation
This phase of treatment may be the most clinically significant becauseproper shade matching is directly dependent on the tooth type (ie, whetherthe tooth is high or low in translucency) (Fig. 1).
E-mail address: [email protected]
0011-8532/07/$ - see front matter � 2007 Published by Elsevier Inc.
doi:10.1016/j.cden.2007.02.004 dental.theclinics.com
474 CHU
Preoperative evaluation affects material selection because the choices ofmaterials that can be used for the definitive restoration (ie, metal-ceramicor high-strength computer aided design-computer aided manufacturing(CAD-CAM)–based ceramics, such as alumina or zirconia [Fig. 2]) ulti-mately dictate the tooth preparation design (Fig. 3). The stump shade ofthe tooth must be taken into consideration because it may influence thevalue, chroma, and hue of the final restoration if a translucent or semitrans-lucent material is used (Fig. 4).
Fig. 1. The central incisor teeth represented in the photograph on the left are low in translucency
and high in opacity. Note the lack of translucency throughout the tooth structure.Matching these
teeth is best served with metal-ceramic restorations or computer aided design-computer aided
manufacturing (CAD-CAM)–based ceramics. The central incisor teeth on the right are higher
in translucency. Materials selection and restoration type for these teeth may comprise the follow-
ing: all-ceramic refractory cast or platinum foil veneer or crown; leucite-reinforced pressable
ceramics; or a porcelain butt margin CAD-CAM–based ceramic restoration, such as zirconia.
Fig. 2. High-strength CAD-CAM materials are available in various types of ceramic (ie, alu-
mina and zirconia) to satisfy the strength and aesthetic requirements anywhere in the mouth.
They possess light transmission qualities greater than that of metal-ceramic restorations. Opti-
cal properties vary; familiarity with these materials is a must because CAD-CAM has become
increasingly popular and widely accepted among dentists and laboratory technicians alike.
475CLINICAL STEPS TO PREDICTABLE COLOR MANAGEMENT
Fig. 3. Tooth preparation design may take many forms and is primarily dependent on the mate-
rial chosen and collar design for thefinal restoration.A slight chamfer preparation (leftA) requires
ametal collar design because there isminimal reduction in the cervical one third of the tooth.With
an angular shoulder (135-degree) preparation (right A; left B) or full rounded shoulder (right B),
a zero metal collar or ceramic butt margin, respectively, can be selected because greater tooth is
reduced in the gingival one third. CAD-CAM–based restorations or a pressed leucite-reinforced
material canbe selectedwith the equivalentpreparationdesignspreviouslymentioned for the same
reason.
Fig. 4. The stump shadeof the toothmust be taken into considerationbecause itmay influence the
value, chroma, andhue of the final restoration if a translucent or semi-translucentmaterial is used.
476 CHU
Questions to consider during the preoperative patient evaluation includethe following:
1. Is there significant variation of shade from gingival, to body, to incisal?2. Are there any characterizations or effects in the tooth?3. Can the patient’s teeth be categorized as high in translucency or high in
opacity?4. Can materials selection affect the final aesthetic outcome of the
restoration?
After those questions have been addressed a treatment plan can be devel-oped, and the clinician can determine the ideal material selection and prep-aration for the restoration.
Fig. 5. Spectrophotometers measure and record the amount of visible radiant energy reflected
by the teeth one wavelength at a time for each hue, value, and chroma present in the entire vis-
ible spectrum. It uses reflectance technology because it only calculates the quantity and quality
of light that is not absorbed by the measured tooth. Present spectrophotometers used in den-
tistry illuminate the teeth at a 45-degree angle of incidence to the object to eliminate reflectance
glare and thereby distortion of the image. The reflected light from the image is captured at
a zero-degree angle of incidence. A specific and unique fingerprint of the image is then recorded
at intervals of 10 nm throughout the whole visible light spectrum (400–800 nm).
Fig. 6. Portable handheld spectrophotometers, such as the SpectroShade MICRO System from
MHT, use dual digital cameras and LED light technology to measure the color of teeth and
allow readings of its reflectivity and interpreted inferred translucency. A flip-up color PDA
screen allows easy image visualization during image capture and immediate chair-side shade
analysis without requiring the unit to interface with a computer.
477CLINICAL STEPS TO PREDICTABLE COLOR MANAGEMENT
Step 2: image capture and shade analysis
One way to analyze the shade is to use technology (SpectroShade Micro,MHT S.P.A., Milan, Italy) (Fig. 5), because it is the least influenced by con-trast effects and visual discrepancies associated with improper lighting.Technology requires image capture (Fig. 6) or image acquisition. Once theimages are brought into the database and stored, they can then be analyzedfor shade (Figs. 7 and 8). Today’s technology streamlines shade analysis byindicating which shade tabs the clinician should select for reference photog-raphy (shade communication).
Fig. 7. Once the image is acquired, the teeth are analyzed for overall basic shade and the gin-
gival-body-incisal shade. A composite shade analysis map including delta E values can be ac-
quired once the shade information has been downloaded to the computer database using the
SpectroShade software.
Fig. 8. Besides giving a gingival-body-incisal map of the tooth, delta E values can be generated
and quantified. This is unique to spectrophotometers because they have true numerical values
associated with the tooth shade and these numbers can be mathematically compared with the
values of shade tabs. The change in E (delta E) can then be calculated. A delta E of 0 is a perfect
match. The human eye is sensitive to a delta E of 2 in regards to value [L]; any number greater
than 2 is noticeable and not a clinically acceptable match.
478 CHU
Conventional means of shade selection can also be used effectively. Shadetabs remain the most common tools used for conventional shade analysis.Care must be taken to create the proper lighting quantity (175 foot-candleof light) and quality (5500–6500 K) (Fig. 9) in the treatment room to controlthe environment under which shade is selected. This reduces the unhelpfulvariables that can negatively influence conventional shade analysis. In addi-tion, laboratory special effect shade tabs can be used to select the specialeffect porcelain materials that are used in fabrication of the restoration(Fig. 10).
Fig. 9. A light meter can be used in the treatment room to assess the proper quantitative
amount of foot-candle of light (175) illuminating the treatment room environment. In addi-
tion, a color temperature meter can be used to assess the quality of light, which should be at
5500–6500 K.
Fig. 10. Conventional shade guide tabs can be used effectively under proper controlled lighting
and consistent exposure of digital photographs. Laboratory shade guide special effect tabs rep-
resenting the ceramics used in fabrication can also be used clinically for shade.
479CLINICAL STEPS TO PREDICTABLE COLOR MANAGEMENT
Step 3: transferring the information into a visualformat (shade communication)
High-quality digital photographs are the best means to communicateshade. With digital photography, images can be immediately evaluatedand assessed for quality. With cost-efficient storage media devices, there isno penalty for taking a poor image because it can be erased. Special effectsand characterizations can be best visualized by altering the object’s exposureto brightness, viewing angle, and flash orientation (Figs. 11 and 12).
Fig. 11. Photographs of these central incisors with lighting from a twin spot flash from both
sides.
Fig. 12. Flash light emanating from below and from the top allows nuances in tooth shade and
characterization to be clearly visualized. A lower exposure image should be provided to the
technician, thereby allowing visualization of special effects and characterizations in the tooth
shade.
480 CHU
Shade tabs and reference photography should be used together to gatherand communicate the precise shade information, respectively. Shade tabsprovide a visual reference marker, and using contrasting shade tabs thatare both bright and dark allows clinicians and their laboratory techniciansto determine better the value and chroma of the restoration. Taking refer-ence photography provides the laboratory technician with a better under-standing of how the shade tabs compare with the shade of thesurrounding dentition and the value changes of the tooth to be matched
Fig. 13. A high-quality digital camera system is recommended for use because it produces qual-
ity images for shade interpretation. Images can be downloaded onto a CF II/III or SD card.
There is no penalty for a poor image taken because they can be evaluated immediately and
erased if necessary. High-capacity storage media (CF or SD cards) allow literally hundreds
of images to be taken before formatting and eliminating them from the card.
Fig. 14. Reference photographs using contrasting shade tabs that are both bright and dark, and
the actual matched gingival-body-incisal tab, provide a better overall picture of the surrounding
dentition and the tooth to be matched. The color photograph can be converted to a black and
white image, which aids in assessing which value shade tab is the most significant variable. An
18% gray card background can be used to help limit visual distractions that can lead to poor
shade perception.
481CLINICAL STEPS TO PREDICTABLE COLOR MANAGEMENT
(Fig. 13). As an adjunct, black and white photographs are helpful in deter-mining value, which is the most significant variable (Fig. 14).
Once the shade information is gathered by the clinician, it must be deliv-ered to the laboratory. This can be accomplished by sending it as a hardcopy stored on a CD, or by e-mail (Fig. 15). Reference photography andwritten descriptions are the most critical pieces of information for accurateshade communication that must be sent to the laboratory. By using technol-ogy, all of the analysis information can be delivered electronically.
Step 4: interpreting the shade information (interpretation)
When the laboratory technician receives the shade information, he or shemust interpret all of the pieces of submitted information. A color map re-port alone is insufficient; all materials should be taken into account wheninterpreting the shade (Figs. 16 and 17). The reference photography is tan-tamount to the laboratory technician to understand better the shade tab
Fig. 15. E-mail allows for instant transferal of shade information to and from the laboratory
provided the server allows high-capacity internet file transfer. The shade data may be mailed
to the laboratory on a CD along with the actual case.
Fig. 16. Photographs of the tooth to be matched, digital shade reports, and reference photo-
graphs can be compiled as a composite collage to allow easy and simple shade interpretation
and understanding of color. Interpretation of shade information can be termed ‘‘visual under-
standing’’ of the color.
482 CHU
selection and the variance in value and chroma. The digital color map pro-vides a close-to-accurate depiction of the shade reading (shade analysis).
Step 5: fabricating the restoration (fabrication)
After assessing the shade, and determining what material works bestgiven the particular clinical application (Fig. 18), the laboratory technicianfabricates the restoration and adds the necessary details in the staining andglazing stage to match the opposing dentition (Fig. 19).
Step 6: verifying the accuracy of the shade match (verification)
Shade verification is one of the most critical phases of treatment. Itshould always be done in the laboratory by the laboratory technician beforebeing returned to the clinician for try-in or insertion. The simplest means ofshade verification is through the use of shade tabs. Using an 18% gray cardas a background is also helpful to eliminate any surrounding distractionsthat could cause poor shade perception.
Fig. 17. With all the shade information at hand, the laboratory technician translates this infor-
mation into the language of the ceramic system to be used.
Fig. 18. The ceramist creates detailed tooth maps defining where the system’s special effect
powders should be used to achieve the desired nuances in shade.
483CLINICAL STEPS TO PREDICTABLE COLOR MANAGEMENT
Step 7: placement (clinical insertion and cementation)
The ultimate verification of the restoration’s accuracy happens when theclinician fits the restoration (Fig. 20). Does it or does it not match? If therestoration does not match, it should be a glaring problem. By using thisprotocol, however, remakes should be significantly minimized. If the resto-ration does not match, steps 2 through 6 should be repeated. The referencephotographs should be taken with the new restoration in place and refer-enced accordingly.
Using the seven-step shade-taking and communication approach proto-col, challenging anterior restorations can be matched confidently, predict-ably, and repeatedly (Fig. 21).
Fig. 19. Ceramic powders and internal colors are layered and stacked to proper shape, size, and
contour to impart the correct visual effect on firing. Extrinsic glazes are added to finalize the
color effects of the final restoration.
Fig. 20. Any discrepancies in the final restoration are immediately evident on placement by the
clinician. Likewise, a perfect restoration appears indistinguishable among its natural neighbors.
484 CHU
Summary
The best way to analyze shade objectively is to use technology-based sys-tems; however, shade tabs can be used judiciously. Details added by the lab-oratory technician in the fabrication process can often increase that naturalappearance of a shade. This is best communicated with digital images andreference photography and an 18% gray card as the background to elimi-nate contrasting effects. Successful shade taking involves a combination oftechnology-based systems, shade tabs, and reference photography.
Further readings
A guide to understanding color communication. Grandville (MI): X-Rite; 2002.
Age-Related Eye Disease Study Research Group. A randomized placebo-controlled clinical trial
of high-dose supplementation with vitamins C and E beta carotene and zinc for age-related
macular degeneration and vision loss. AREDS report no. 8. Arch Ophthal 2001;119(10):
1417–36.
Carsten D. Successful shade matching: what does it take? Compend Contin Educ Dent 2003;24:
175–8, 180, 182.
Chu SJ, Devigus A,Mieleszko A. Fundamentals of color: shade matching and communication in
esthetic dentistry. Chicago: Quintessence Publishing Co, Inc; 2004.
Chu SJ. Precision shade technology: contemporary strategies in shade selection. Pract Proced
Aesthet Dent 2002;14:79–83.
Chu SJ. Science and art of porcelain veneers: color. Chicago: Quintessence Publishing; 2003.
p. 157–206.
Chu SJ. The science of color and shade selection in aesthetic dentistry. Dent Today 2002;21(9):
86–9.
Commission Internationale de l’Eclairage. Colorimetry, official recommendations of the Interna-
tional Commission on Illumination. Publication CIENo. 15 (E-1.3.1). Paris: Bureau Central
de la CIE; 1971.
Fraunfelder FT. Drug-induced ocular side effects. Philadelphia: Williams & Wilkins; 1996.
Hunter RS, Harold RW. The measurement of appearance. New York: Wiley; 1987. p. 3–68.
Kuehni RG, Marcus RT. An experiment in visual scaling of small color differences. Color Res
Appl 1979;4:83–91.
Miller L. Organizing color in dentistry. J Am Dent Assoc 1987;[Spec Iss]:26E–40E.
MillerMD, ZauchaR. Color and tones. In: The colormac: design production techniques. Carmel
(IN): Hayden; 1992. p. 23–39.
Fig. 21. Using the seven-step shade-taking and communication approach protocol, challenging
anterior restorations can be matched confidently, predictably, and repeatedly.
485CLINICAL STEPS TO PREDICTABLE COLOR MANAGEMENT
Munsell AH. A grammar of color. New York: Van Nostrand Dreinhold; 1969.
Paravina RD, Powers JM. Esthetic color training in dentistry. St. Louis (MO): Elsevier Mosby;
2004.
Rosenthal O, Phillips R. Coping with color-blindness. New York: Avery; 1997.
Sim CP, Yap AU, Teo J. Color perception among different dental personnel. Oper Dent 2001;
26(5):435–9.
Sproull RC. Colormatching in dentistry, part I. The three-dimensional nature of color. J Prosthet
Dent 1973;29:416–24.
Wasson W, Schuman N. Color vision and dentistry. Quintessence Int 1992;23(5):349–53.
Wyszecki G, Stiles WS. Color science concepts and methods, quantitative data and formulae.
2nd edition. New York: Wiley; 1982. p. 83–116.