CLECO - DC TOOL catalogue...Cleco/DGD tightening controller or suitable PC software. Batterie weights: 26-V Li-Ion battery 0,50 kg, 44V Li-Ion battery 0,85 kg Extra Equipment: Scanner,

www.absgroup.in

CLECO - DC TOOL catalogue

Since 1998

QUALITY WITH EXCELLENCE

Advanced Bolting Solutions Pvt. Ltd. (ABS) is a leading multinational company providing Precision Bolting and Machining Solutions through consultative sales of leading international brands, in situ controlled bolting and cold pipe cutting services across multiple locations in India and the Middle East.

With over two decades of expertise and the mission to be active partners in customer centric growth, we offer Productivity Enhancement Services through technical consultations, trainings, 24x7 sales and technical support and multiple NABL accredited calibration facilities.

Our “Joint Integrity Services” ensures leakage free joints and bolt load accuracy while maintaining industrial workplace safety standards.

Today, with over 200 employees across all our facilities, we stand as the frontrunner in providing the most comprehensive solutions to every major industry such as Automobile, Assembly, OEM, Power, Steel, Oil & Gas, Heavy Engineering, Wind, Mining, Shipping and more.

We have a team of (ASME Certified) experts who provide bolting related training courses and certifications. With a diligent focus on process management, we have a strong Quality Management System comprising of standard certifications like ISO 9001:2015 and OHSAS 18001:2007.

About Us

www.boltight.com

www.equalizerinternational.com

www.aimco-global.com

www.climaxportable.com

www.absgroup.in

www.hytorc.com

www.clecotools.com

Production Tools

1800-2

12-1

715

| se

rvic

e@

ab

sgro

up

.in

CA

LL /

REG

ISTER

Your

Com

pla

ints

at:-

TOOL CALIBRATION

We provide NABL accredited calibration services through our in-house lab with calibration capacity upto 27000 Nm* for Hydraulic, Pneumatic, Electric, Battery Operated and Manual torquing tools. We also do the calibration of pressure gauges upto 700 bar capacity.

Tool calibration is done by certified technicians.

*(NABL approved range 2000 – 20000 Nm)

We at ABS are committed to customer delight, with the best service support practices in industry. We are equipped with State-of-the-Art service centres at office locations in India (Navi Mumbai, Chennai, Bengaluru and Jamnagar) and Middle East (Sharjah, Abu Dhabi).

We undertake thorough analysis of the cause of defect (RCA Analysis), document it in standard formats and share with the customer for its understanding. The service is provided in defined SLA and with customer feedback. One of the key features of our service support is the provision of information on the 'Do's and Don'ts' to avoid frequent breakdown of tools.

We also have facility of Annual Rate Contract (ARC) for tool services, to ensure you get optimum return on your maintenance investment.

REPAIR AND TOOL MAINTENANCE

What's better than having the service facility at your convenience in your premises!

ABS Mobile Service Van provides you this comfort. It is a unique initiative pioneered by us in India to provide calibration of torqueing tools at your doorstep.

The Service Van is equipped with calibration machine having capacity to calibrate up to 27000 Nm, and is manned by highly skilled professionals on the move.

Our van schedule is sent on periodic basis to our esteemed customers. You may please write to us at or [email protected] on our Toll Free Number-18002121715, to know about mobile van visit schedule in your area.

SERVICE AT YOUR DOOR-STEP

TRAINING

We also provide on-site services including:

• Onsite Product Demonstration

• Onsite Training

• Onsite Pre-emptive Maintenance Services

• AMCs

• Site audits of tool condition

• On-Site Application Study and Consultancy

We boast of unparalleled technical competence when it comes to bolting in Indian market.We are the only bolting company to in the country today having our own resources as ASME certified training providers.

We deliver training modules to match the suitability to different levels of customer's personnel- such as operators, supervisors, engineers and managers.We also offer customized training programs as per requirement of customers based on their TNI (Training Need Identification).

Bolting courses generally offered are:-

1. ASME Training for Joint Integrity

2. Safe Bolting Methods

3. Tool Operation and Service

Since Safety is one of the major thrust in all our training programs, we also train the operators on safe upkeep and maintenance of tools in addition to the operational training.

DGDpg.11-12LiveWire� 2

Right Angle Series

pg.03

Right Angle Series

pg.07-08

Production Tools

pg.18-19

ELECTRONIC INTELLIGENT SPINDLES

NUTRUNNERS

mPro400GCGlobal Controller

pg.04-05

ELECTRIC

ACCESSORIES

pg.14

Quality Fastener Tools

INLINE SCREWDRIVERS

Tube Nut Series

pg.09

Pistol Grip

pg.10

19TTA02Q19 Series-T Handle

pg.16

SCREWDRIVER

19PTA05Q19 Series-P Handle

pg.17

2, 19, 8, 88, 35 Series Clecomatic Clutch

pg.20

ANGLE NUTRUNNERS

19, 24 & 34 Series Clecomatic Clutch

pg.21


pg.22

19, 24, 34, 45, 55 & 75 Series Stall – Reversible & Non-Reversible

pg.23

Corded Electric Assembly Tools

pg.24

Pulse Nutrunners

Cleco is a global leader in manufacturing and delivering world-class assembly solutions including DC electric and pneumatic assembly tools, and pneumatic power motors.

Cleco was founded in 1894 as Cleveland Pneumatic Tool Company in Cleveland, Ohio, USA. Cleco’s expertise is the culmination of 120 plus years of delivering assembly tools and systems for a wide range of applications in the automotive, energy, aerospace, and general industries.

This expertise is differentiated by the superior quality and performance in a wide range of tools that consistently offer innovative, long-lasting, and safe solutions.

Cleco’s solutions are focused on increasing productivity while enhancing the users’ experience with simplicity of set-up, ease of use, and focus on comfort and safety.

www.clecotools.com

Production Tools

Up To 16* LiveWire Tools.1 Line Controller.*Contact Regional Application Center for requirements greater than 10.

Wireless Security¡ WEP (Wired Equivalent Privacy) • 64/128 Bit Encryption¡ WPA (Wireless Protected Access)/ WPA2/802.1x • 128 Bit TKIP/CCMP Encryption • 802.1x Authentication pre-shared keymode (PSK) - LEAP, PEAP

The Most Cost-Effective Safety Critical Solution Available

Up To 50 % Savings Over Traditional Systems!

Up To 83 % More Productivity!

2

ELE

CTRO

NIC

3

LiveWire™ 2 offers functions for precise torque, angle and speed control for safety-critical fastening applications in a new wireless design that is 10 ounces (300 grams) lighter!

ResolverControl

Brushless Precision

Transducer

Accuracy

LiveWire� 2Right Angle Series

Cordless

Transducer Controlled Tool

ELECTRONIC

Data Transmission

Y – WLAN: Dual-Band 2,4 GHz, 5 GHz

Peripherals

P – Accessory Platform

Motor47

Tool Style

A – Angle

PowerB – Battery/

PM48

Max Torque (Nm)

15 - 15 Nm 35 - 35 Nm21 - 21 Nm 50 - 50 Nm28 - 28 Nm

VersionB – 26–48 V

Output Drive

AM3 – 3/8” Sq.Dr.

Retainer

– Pin Retainer

B – Ball Retainer

Tool Series

L – LiveWire 2 Series

47 B A Y P B XXX XXX X L

Nomencature for LiveWire 2 Tool Series

ANGLE TORQUE RANGEFREE SPEED (RPM) LENGTH WITH BATTERY

BATTERIES PM48 26 V 44 V

MODEL NUMBER Nm 26 V* 44 V* 48 V kg mm

WEIGHTLESS BATTERY OUTPUT

DRIVE SIZE

*Speed with fully charged battery. General: All tools must be used with an approved Cleco/DGD tightening controller or suitable PC software.Batterie weights: 26-V Li-Ion battery 0,50 kg, 44V Li-Ion battery 0,85 kgExtra Equipment: Scanner, sockets, batteries and chargers must be ordered seperately.

47BAYPB15AM3L

47BAYPB21AM3L

47BAYPB28AM3L

47BAYPB35AM3L

47BAYPB50AM3L

5.5-15

8-21

10-28

12-35

18-50

538

411

291

244

168

983

751

532

447

293

983

751

532

447

293

1,83

1,83

1,83

2,09

2,11

3/8"

3/8"

3/8"

3/8"

3/8"

563

563

563

595

603

544

544

544

576

582

The Most Flexible, Cost-Effective Systems Controller...Ever

Label Printer

Ethernet TCP/IP

System Bus

Fieldbus

Tool

Serial – RS232

Serial – RS232

Discrete I/O – 24vdc

Serial – RS232

Ethernet LAN

Socket Tray

Wireless Torque Wrench

Operator ID

BarcodeScanner

Introducing the Cleco mPro400GC Global Controller, the rst controller for safety-critical applications that offers unsurpassed levels of exibility, connectivity, and serviceability while providing superb torque accuracy and process control. This new controller incorporates the advanced technical features of the proven DGD mPro system with the user-friendly software of the trusted Cleco TME controller, resulting in a powerful control solution that offers impressive cost savings through unequalled exibility.

mPro400GCGlobal Controller

Cost-EffectiveSystems Controller

All From

One Controller

4

The Most Flexible, Cost-Effective Systems Controller...Ever

Control System

Customer Control System

Corded Hand Tool

DGD Conventional Spindles

DGD Intelligent SpindlesUnique Technology, Smallest Hardware Foot Print, Best TCO.

Data Server mPro RemoteProgramming

AccessPoint

CPM3 system with internal power transformer

5

6

RUNDOWN DATA STORAGE

FEATURES:

• A single software program that covers both standard and fixtured applications

• Standard spindle sequencing and reject management

• 19 advanced fastening control sequences standard at no additional cost

• Remote programming software with no licensing restrictions

• Touch screen display with integrated alpha-numeric keyboard

Universal Connectivity For Ultimate Flexibility

User Friendly

GUI

Quick-Start Auto

Program Option

Oscilloscope Process Management

In-Depth Data Management

Easy-To-Read Run

Screen

Digital Image Bolt Sequencing

Max Output Torque (Nm)

Under 60 Nm, rounded up to the nearest 1 Nm.

Over 60 Nm, rounded to the nearest 5 Nm.

Motor

67

Tool Style

A – Right Angle

Power

E -Electric

XX E A XXXX XXX X

Output Drive

AL6 – 3/4” Sq.Dr.

AM6 – 3/4” Sq.Dr.

ML6 – 3/4” Sq.Dr.

AH8 – 1” Sq.Dr.

Retainer

- Pin retainer B Ball retainer

ELE

CTRIC

7

Electric Nutrunners –

Corded Transducer Control

ELECTRICRight Angle Series

TransducerControl

Brushless Precision

Memory Intelligence

67EA235AL6

Isolation Transformer544185PT

Incoming Power

115/230VAC

Matrix Tool Cable

542778-XMCleco 67 Series Tool

Air-Lb Cable

Power Cable

All 67 Series Tools require an isolationtransformer (544185PT) for use with Cleco Global Controller.

RIGHT ANGLE TORQUE RANGE

MODEL NUMBER ft. lbs. lbs. kgRPM

WEIGHT*MAX.SPEED

OUTPUTDRIVE SIZE

67EA235AL6

67EA255AL6

67EA310ML6

67EA340AM6

67EA460AM6

67EA570AM6‡

67EA860AH8

67EA1035AH8

67EA1340AH8

67EA1700AH8

67EA2010AH8

33.9-169.6

40.6-188.1

44-229

51.6-247.1

70.1-339.3

84.8-420.4

129.1-634.3

154.9-763.3

199.1-988.3

250.8-1253.8

295.0-1475.0

46-230

55-255

60-310

70-335

95-460

115-570

175-860

210-1035

270-1340

340-1700

400-2000

Nm

135

115

100

90

66

53

33

25

20

16

13

12.9

12.9

20.2

21.0

21.0

21.0

22.7

23.0

23.0

23.0

23.0

5.9

5.9

9.2

9.5

9.5

9.5

10.3

10.5

10.5

10.5

10.5

3/4”

3/4”

3/4”

3/4”

3/4”

3/4”

1”

1”

1”

1”

1”

in. mm

LENGTH

25.8

25.8

29.1

31.6

31.6

31.6

25.3

26.3

26.3

26.3

26.3

655

655

739

803

803

803

643

668

668

668

668

ANGLEHEAD

SIDE TO CENTER HEIGHT

in. mm

2.3

2.3

2.55

3.1

3.1

3.1

9.32

9.32

9.32

9.32

9.32

58

58

65

79

79

79

237

237

237

237

237

in. mm

1.03

1.03

1.06

1.38

1.38

1.38

1.50

1.50

1.50

1.50

1.50

26

26

27

35

35

35

38

38

38

38

38 *Weights are without tool cable and reaction bar. Note: All 67 series tools require an isolation transformer (544185PT) for use with Cleco Global Controller.‡Note: Contact regional application ceneter for implementation assistance.General: All tools must be used with an approved ATG cable and controller.

Standard Equipment: Matrix Connector. Extra Equipment: Std. tool cable 542778-XX, RA swivel cable 544055-XX, Inline swivel cable 544056-XX, Extension cable 542779-XX.

8

TransducerControl

Brushless Precision

Memory Intelligence

Right Angle

Series

ELE

CTRIC

Elect

ric

Nutrunner

s –

Corded

Tra

nsduce

r Contr

ol

ELECTRIC48EAE58AM3 18EAE28AM3

RIGHT ANGLE TORQUE RANGE


WEIGHT*MAX.SPEED

OUTPUTDRIVE SIZE

XX E A E XXX XXX X


Under 60 Nm, rounded up to the nearest 1 Nm.

Over 60 Nm, rounded to the nearest 5 Nm.

Motor

18, 48

Tool Style

A – Right Angle

Power

E -Electric

Output Drive

AL2 – 1/4” Sq.Dr.

AL3 – 3/8” Sq.Dr.

AM3 – 3/8” Sq.Dr.

Retainer


Connector

Air-LB

AM4 – 1/2” Sq.Dr.

AH4 – 1/2” Sq.Dr.

MH4 – 1/2” Sq.Dr.

AX6 – 3/4” Sq.Dr.

18EAE08AL2

18EAE15AM3

18EAE22AM3

18EAE28AM3

48EAE15AL3

48EAE28AL3

48EAE41AM3

48EAE58AM3

48EAE58AM4

48EAE90AH4

48EAE105AH4

48EAE135MH4

48EAE175AX6

48EAE230AX6

1 .5-5 .9

3 .0-11 .1

3 .7-16 .2

4 .4-20 .7

2 .2-11 .1

4 .4-20 .7

6 .6-30 .2

8 .9-42 .8

8 .9-42 .8

13 .3-64 .2

15 .5-76 .7

19 .9-98 .1

26 .6-129 .8

33 .9-169 .6

2-8

4-15

5-22

6-28

3-15

6-28

9-41

12-58

12-58

18-87

21-104

27-133

36-176

46-230

Nm

3000

1300

920

700

2855

1300

1090

770

770

515

340

265

190

145

2.9

3.3

3.3

3.3

3.8

4.1

4.3

4.3

4.3

6.6

6.6

7.3

10.2

10.2

1.3

1.5

1.5

1.5

1.7

1.9

2.0

2.0

2.0

3.0

3.0

3.3

4.6

4.6

1/4”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

1/2”

1/2”

1/2”

1/2”

3/4”

3/4”

in. mm

LENGTH

13.6

14.8

14.8

14.8

15.7

16.2

17.3

17.3

17.3

18.5

18.5

19.1

21.6

21.6

345

376

376

376

398

410

440

440

440

470

470

485

549

549

ANGLEHEAD

SIDE TO CENTER HEIGHT

in. mm

1.4

1.6

1.6

1.6

1.6

1.6

1.9

1.9

1.9

2.3

2.3

2.4

2.7

2.7

36

41

41

41

41

41

48

48

48

58

58

61

69

69

in. mm

0.51

0.59

0.59

0.59

0.59

0.59

0.75

0.75

0.75

0.81

0.81

0.94

1.06

1.06

13

15

15

15

15

15

19

19

19

21

21

24

27

27 *Weights are without tool cable and reaction bar. General: All tools must be used with an approved ATG cable and controller.Standard Equipment: Air-LB Connector. Ball retainer optional.Tools with Matrix connector available upon request.

Extra Equipment: Std. tool cable 301866-XX, RA swivel cable 301903-XX,Inline swivel cable 301904-XX, Extension cable 301877-XX.

Thru Hex DoubleThru Hex

PartialThru Hex

Partial Thru Double Hex

ELE

CTRIC

9

Electric Nutrunners –

Corded Transducer Control

ELECTRICTube Nut Series

TransducerControl

Brushless Precision

Memory Intelligence

TUBE NUT TORQUE RANGE


WEIGHT*FREE

SPEEDMAX.DRIVESIZE

48ETE20T2

48ETE30T3

48ETE40T4

7.4-14.8

11.1-22.1

14.8-29.5

10-20

15-30

20-40

Nm

1425

1030

770

4.4

4.5

5.3

2.0

2.0

2.3

1/2”

3/4”

1 1/16”

in. mm

LENGTH

16.9

16.6

17.9

430

422

454

HEAD

C OPENING D END/CNTR.

in. mm

0.53

0.73

0.93

13

19

24

in. mm

0.28

0.475

0.675

7

13

18

*Weights are without tool cable and reaction bar.General: All tools must be used with an approved ATG cable and controller.Standard Equipment: Air-LB Connector.Tools with Matrix connector available upon request.

Extra Equipment: Std. tool cable 301866-XX, RA swivel cable 301903-XX, Inline swivel cable 301904-XX, Extension cable 301877-XX.

T2

T3

T4

A WIDTH B BLADE HT.

in. mm

0.55

0.59

0.59

14

15

15

in. mm

1.42

1.65

2.36

36

42

60

Note: To order a tool include the Socket Nomenclature with the Tool Nomenclature.Order T2XXXX for a complete head assembly (i.e. T2MF02)To order individual sockets, use a “KS” prefix (i.e. KS2EA01 for a T2 1/4”, Flush, Thru Hex socket.)

Tube Nut Tool Nomenclature Socket Nomenclature

Max Output Torque

<60 Nm, rounded up to the nearest 1 Nm.

Head Type

T2 - 20 Nm

T3 - 30 Nm

T4 - 40 Nm

Motor

48

Connector

Air-LB

Tool Style

T – Tube Nut

ElectricOutput Type

0 -Partial Thru Hex 2 -Double Thru Hex

1 -Thru Hex 3 -Partial Thru

Double Hex

Extension Length

0 – Flush 4 – 1/2” 8 – 1”

2 – 1/4” 6 – 3/4”

Maximum Hex Socket Size

MG, EE T2 Head Type

MM, 3/4” T3 Head Type

MU, 1 1/16” T4 Head Type

00, ## (Specials) All Head Types

Head Type

KS2 – T2

KS3 – T3

KS4 – T4

XX E T E XX XX KSX XX XX X

Socket Sizes

EA – 1/4” M5 – 5mm MH – 14mm MP – 22mm

EC – 3/8 M6 – 6mm MI – 15mm MQ – 23mm

EE – 1/2 MA – 7mm MJ – 16mm (5/8) MR – 24mm (15/16)

EF – 9/16 MB – 8mm (5/16) MK – 17mm MS – 25mm

EH – 11/16 MD – 10mm ML – 18mm MT – 26mm

EJ – 13/16 ME – 11mm (7/16) MM – 19mm (3/4) MU – 27mm (1 1/16)

EK – 7/8 MF – 12mm MN – 20mm

EM – 1 MG – 13mm MO – 21mm

T2,“B”

T3 & T4Head Height

T3 Head1.44” (37 mm)

“A”“C”

“D”

“A”

2.63” (67 mm) 1.56” (40 mm)

T2 Head

“C”

“D”

T4 Head

1.94” (49 mm)

“A”

“C”

“D”

48EPE25D3

XX E P E XXX XX X


Motor

18, 48

Tool Style

P – Pistol

Power

E -Electric

Output Drive

Q – Quick change

D2 – 1/4” Sq .Dr.

D6 – 3/4” Sq .Dr.

Retainer


Connector

Air-LB

D3 – 3/8” Sq.Dr.

D4 – 1/2” Sq.Dr.

D8 – 1” Sq.Dr.Under 60 Nm, rounded up to the nearest 1 Nm.Over 60 Nm, rounded to the nearest 5 Nm.

10

TransducerControl

Brushless Precision

Memory Intelligence

Pistol Grip

ELE

CTRIC

Elect

ric

Nutrunner

s –

Corded

Tra

nsduce

r Contr

ol

ELECTRIC

PISTOL GRIP TORQUE RANGE


WEIGHT*MAX.SPEED

OUTPUTDRIVE SIZE

18EPE06Q

18EPE06D2

18EPE12Q

18EPE12D3

18EPE17Q

18EPE17D3

18EPE22D3

18EPE31D3

48EPE12Q

48EPE12D2

48EPE25D3

48EPE36D3

48EPE48D3

48EPE65D4

48EPE90D4

48EPE125D4

48EPE150D4

48EPE200D6 (swing bar)



1.5-4.4

1.5-4.4

2.2-8.9

2.2-8.9

3.0-12.5

3.0-12.5

3.7-16.2

5.2-22.9

2.2-8.9

2.2-8.9

3.7-18.4

5.9-26.6

7.4-35.4

9.6-47.9

14.0-66.4

19.2-92.2

22.9-110.6

92-144

225-368

370-740

2-6

2-6

3-12

3-12

4-17

4-17

5-22

7-31

3-12

3-12

5-25

8-36

10-48

13-65

19-90

26-125

31-150

125-195

300-500

500-1000

Nm

4000

4000

1820

1820

1290

1290

985

695

4000

4000

1820

1290

985

750

510

360

240

180

53

33

2.2

2.2

2.4

2.4

2.4

2.4

2.4

2.4

2.7

2.7

2.9

2.9

3.0

5.0

5.3

5.3

5.3

9.5

9.8

16.2

1.0

1.0

1.1

1.1

1.1

1.1

1.1

1.1

1.2

1.2

1.3

1.3

1.4

2.3

2.4

2.4

2.4

4.3

4.5

7.3

1/4” Hex

1/4”

1/4” Hex

3/8”

1/4” Hex

3/8”

3/8”

3/8”

1/4” Hex

1/4”

3/8”

3/8”

3/8”

1/2”

1/2”

1/2”

1/2”

3/4”

3/4”

1”

in. mm

LENGTH

7.0

6.5

7.7

7.2

7.7

7.2

7.2

7.2

8.2

7.7

8.4

8.4

8.6

11.4

12.0

12.0

12.0

16.2

16.2

19.16

178

165

196

183

196

183

183

183

208

196

213

213

218

290

305

305

305

410

410

486

SIDE TO CENTER

in. mm

0.84

0.84

0.84

0.84

0.84

0.84

0.84

0.84

0.84

0.84

0.84

0.84

0.84

1.1

1.1

1.1

0.9

1.13

1.13

1.5

21

21

21

21

21

21

21

21

21

21

21

21

21

28

28

28

23

29

29

38

*Weights are without tool cable or suspension bail.General: All tools must be used with an approved ATG cable and controller.Standard Equipment: Air-LB Connector; Suspension Bail; Dead Handle is included with18EPE12Q & 18EPE12D3. Reaction bar is included with pistol tools with output torques of17-1000 Nm. Ball retainer optional. Tools with Matrix connector available upon request.

Extra Equipment: Std. tool cable 301866-XX, RA swivel cable 301903-XX,Inline swivel cable 301904-XX, Extension cable 301877-XX.

18EPE12Q

11

Power Supply OUT

Servo amplier and measuring board

Service access panel

Connection cable for transducersMotor

Torque Transducer

Power Supply IN

Floating spindle adapter (ordered separately)

With straight drive, offset drive, and angle drive congurations, each available with reversible gears, and four different motor sizes to suit different torque requirements, there’s a DGD Intelligent Spindle to t most any situation. Your Apex Tool Group Technical Sales Representative will work with you to determine the best solution for you. We can also provide you with application assistance in automation integration, joint analysis testing, complex data connection, and more.

DGD

Intelligent Spindles

Intelligent Spindle Sizes and Torque Ranges

Size 1

Size 2

Size 3

Size 4

Nm 0 100 200 300 400 ... 2.600 2.700 2.800

2-53 Nm

25-200 Nm

50-300 Nm

100-2800 Nm

Motor with servoamplier & measurement card

B - Brushless MotorU - Reverse gearingTS - Tightening SystemE - Standard

Example

Size

1, 2, 3, 4Gear

1 - SizeB - Brushless motor gearXXX - Max. torqueA - Generation

2nd Transducer for cross check

2 - 2x only for Z attachment

Attachment

1 - SizeZ - Straight attachementVK - Offset drive with transducerWK - Angle drive with transducer1 - Capacity levelB - Version

Transducer

1 - SizeK - Combination torque + angle1 - Capacity level 1 or 2B - VersionM - Only moment, no angle encoder

1 BTSE — 1B035A — 2/ 1M1B — 1ZBX XXXX — XXXXXX — X XXXX — XXXXX

Note: Floating spindle adapter must be ordered separately.

12

Intelligent Spindles

Offset DriveOffset Drive with reversible gears

Intelligent Spindle Congurations

Straight Drive

Straight Drive with reversible gears

Angle Drive

Angle Drive with reversible gears

13

mProRemote/TM-COM

Remote Programming Software

mProRemote & TM-COM Minimum System Requirements

Operating System: Windows 2000, NT or XP

Processor: Pentium

Memory: 256MB

Free Disk Space: 10MB per controller

Software

mProRemote Provided with each mPro400GC-M & mPro400GC-P

TM-COM Provided with each mPro400GC-E & mPro400GC-I

Part Number Description

Cleco’s remote programming software delivers ultimate control to the user, empowering them to control the production process remotely through programming that is easy to use and intuitive. Anything that can be programmed locally on the controller can also be performed from a remote location using the exact same screens. Using this software to monitor, modify, and/or manage the production line will increase your efciency and productivity. Centralized management of the tightening process assures quality products. TM-COM (for GC-E/GC-I controllers) can communicate using either a RS232 or TCP/IP connection. mProRemote (for GC-M/GC-P controllers) utilizes a TCP/IP connection only.

14

General Accessories

Quality Fastener ToolsFor more than half a century Apex has maintained the position of world leader in industrial fastening tools. Many power and insert bits, socket combinations and other drivers/adapters pioneered by Apex have today become industry standards, while Apex quality, service and selection give you unsurpassed value.

■ More Quality For Your MoneyApex quality starts with the selection of raw materials. Only carefully chosen, high grade tool steel is used to make Apex industrial fastener tools. Next, each tool is precision machined from solid bar stock to exacting standards of accuracy. You always get a snug, secure t – a t that is not possible from stamped tools. Finally, each Apex fastener tool is tempered with our exclusive heat treating process. During this step the degree of hardness is determined based upon the application.

■ Fast DeliveryAl l Apex s tandard ca ta log i tems are avai lable of f- the-shel f for immediate delivery. If you need special assistance with your order, your Apex manufacturer ’s representative can handle any questions your may have.

■ Special OrdersApex offers the broadest selection of screw driver and nut runner tools available, from bits, sockets and universal wrenches to extensions, adapters and nut setters. If you have a special application, contact your Apex representative. We may have what you need in stock, or can design and produce specia l fas tener tools for a lmost any application.

■ Ordering InformationApex products are distributed world-wide. For a catalog of the complete line of Apex quality fastener tools or to locate your nearest Apex distributor.

®POZIDRIV®TORQ-SET

®ACR

®SEL-O-FIT

®TORQ-SET

SOCKET HEAD

CLUTCH HEAD

SQUARE RECESS

PHILLIPS ACR ®

FREARSON

® PHILLIPSTORX®

®HI-TORQUE

®TRI-WING

SLOTTED

Registered Trade Marks: HI-TORQUE, Voi-Shan; TORX, Camcar Division of Textron; ACR, POZIDRIV, TORQ-SET and TRI-WING, Phillips International Co.; SUPADRIV, EIS (Fasteners) LTD.; SEL-OFIT,FLIP-TIP, and Apex, Apex Tool Group, LLC.

15

General Accessories

Quality Anti-Mar Fastener ToolsBegin With Quality Fastener Tools.Apex µ-Guard™ provides a protective barrierbetween genuine Apex fastener tools and your nely nished workpiece. The free-spinning patent-pending design provides maximum protection for polished and highly sensitive surfaces.

Apex µ-Guard™ covering is made of a thermo plastic urethane (TPU elastomer) which cushions against costly incidental side impacts. It offers the lowest coefcient of friction for maximum tool efciency. It is also non-removable for tamper resistance.

With Apex µ-Guard™ you get the proven Apex fastener tool t and performance plus the best protection available against marring and in-system damage.

µ-Guard™ is your guard against the potential hazards caused by rotational friction.

Prevents Side Impact Damage

Free-Spinning Design

Virtually Damage Free

If it doesn’t say Apex on the outside, how can you be sure of what’s

on the inside?

16

The renowned Clecomatic® clutch is re-engineered to provide class-leading accuracy/repeatability and improve the already legendary durability.The “T” handle is best for applications that are pre-threaded and the grip on the tool is required to simply guide the tool as the fastener is being tightened.

Class-leading

Accuracy & Repeatability

AdjustableReverse Lever

External Torque Adjustment

19TTA02Q19 Series-

T Handle

SC

REW

DRIV

ER

Pisto

l Gri

p Scr

ewdri

vers

MODEL NUMBER

1/4” QUICK CHANGE lbs. kgRPM

WEIGHTFREE

SPEED

19TCA02Q

19TCA03Q

19TCA04Q

19TCA05Q

19TCA06Q

19TCA07Q

19TCA09Q

2800

1900

1100

660

260

660

470

1.44

1.54

1.54

1.54

1.54

1.54

1.73

0.7

0.7

0.7

0.7

0.7

0.7

0.8

in. mm

LENGTH

8.0

8.2

8.0

8.4

8.4

8.4

9.3

202

207

202

212

212

212

235

TORQUE RANGE

General: Tool performance rated at 90 psi (620kPa) air pressure.Standard Equipment: Operating instructions & service manualSuspension bailDead handle on models above 100 in.-lbs. torque cap.All torque springs required to meet indicated torque specification

Optional Equipment:Additional Accessories, Torque SpringsTorque Signal Kit: 302021PT (Trigger w/Clecomatic clutch only)Overhose: 207107 Push-only Conversion Kit: 301121

in.-lbs. in.-lbs.Nm Nm

5 - 19

5 - 26

10 - 40

10 - 45

10 - 45

15 - 60

15 - 79

5 - 19

5 - 19

10 - 38

10 - 38

10 - 38

24 - 60

24 - 60

TOOL RANGE WITH STD. SPRING

0.6 - 2.1

0.6 - 2.9

1.1 - 4.5

1.1 - 5.1

1.1 - 5.1

1.7 - 6.8

1.7 - 8.9

0.6 - 2.1

0.6 - 2.1

1.1 - 4.3

1.1 - 4.3

1.1 - 4.3

2.7 - 6.8

2.7 - 8.9

AIR INLETNPT

AIR CONSUMPTION

MIN. HOSEI.D.

SCFM

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

11

11

11

11

11

11

11

Push and Trigger Start - T Handle - Clecomatic Clutch

19TTA02Q

19TTA03Q

19TTA04Q

19TTA05Q

19TTA06Q

19TTA07Q

19TTA09Q

19TTA15Q

2800

1900

1100

660

260

660

470

260

1.44

1.54

1.54

1.54

1.54

1.54

1.73

1.94

0.7

0.7

0.7

0.7

0.7

0.7

0.8

0.9

7.9

8.1

7.9

8.3

8.3

8.3

9.3

9.6

199

204

199

210

210

210

235

243

5 - 19

5 - 26

10 - 40

10 - 45

10 - 45

15 - 60

15 - 79

45 - 130

5 - 19

5 - 19

10 - 38

10 - 38

10 - 38

24 - 60

24 - 79

45 - 130

0.6 - 2.1

0.6 - 2.9

1.1 - 4.5

1.1 - 5.1

1.1 - 5.1

1.7 - 6.8

1.7 - 8.9

5.1 - 14.7

0.6 - 2.1

0.6 - 2.1

1.1 - 4.3

1.1 - 4.3

1.1 - 4.3

2.7 - 6.8

2.7 - 8.9

5.1 - 14.7

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

11

11

11

11

11

11

11

11

Trigger Start - T Handle - Clecomatic Clutch

SC

REW

DRIV

ER

17

The renowned Clecomatic® clutch is re-engineered to provide class-leading accuracy/repeatability and improve the already legendary durability.The “P” handle is best suited for thread cutting fasteners where force must be exerted against the ergonomically shaped “P” handle during the process.

Pistol Grip Screwdrivers

19PTA05Q19 Series-P Handle

Class-leading

Accuracy & Repeatability

AdjustableReverse Lever

External Torque Adjustment

MODEL NUMBER

1/4” QUICK CHANGE lbs. kgRPM

WEIGHTFREE

SPEED

19PCA02Q

19PCA03Q

19PCA04Q

19PCA05Q

19PCA06Q

19PCA07Q

19PCA09Q

2800

1900

1100

660

260

660

470

1.41

1.51

1.41

1.51

1.51

1.51

1.65

0.6

0.7

0.6

0.7

0.7

0.7

0.7

in. mm

LENGTH

8.1

8.3

8.1

8.5

8.5

8.5

9.8

206

211

206

216

216

216

248

TORQUE RANGE

General: Tool performance rated at 90 psi (620kPa) air pressure.Standard Equipment: Operating instructions & service manualSuspension bailDead handle on models above 100 in.-lbs. torque cap.All torque springs required to meet indicated torque specification

Optional Equipment:Additional Accessories, Torque SpringsTorque Signal Kit: 302021PT (Trigger w/Clecomatic clutch only)

in.-lbs. in.-lbs.Nm Nm

5 - 19

5 - 26

10 - 40

10 - 45

10 - 45

15 - 60

15 - 79

5 - 19

5 - 19

10 - 38

10 - 38

10 - 38

24 - 60

24 - 60

TOOL RANGE WITH STD. SPRING

0.6 - 2.1

0.6 - 2.9

1.1 - 4.5

1.1 - 5.1

1.1 - 5.1

1.7 - 6.8

1.7 - 8.9

0.6 - 2.1

0.6 - 2.1

1.1 - 4.3

1.1 - 4.3

1.1 - 4.3

2.7 - 6.8

2.7 - 8.9

AIR INLETNPT

AIR CONSUMPTION

MIN. HOSEI.D.

SCFM

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

11

11

11

11

11

11

11

Push and Trigger Start - P Handle - Clecomatic Clutch

19PTA02Q

19PTA03Q

19PTA04Q

19PTA05Q

19PTA06Q

19PTA07Q

19PTA09Q

19PTA15Q

2800

1900

1100

660

260

660

470

260

1.41

1.51

1.41

1.51

1.51

1.51

1.65

1.91

0.6

0.7

0.6

0.7

0.7

0.7

0.7

0.9

8.0

8.2

8.0

8.4

8.4

8.4

9.8

9.7

204

209

204

214

214

214

248

247

5 - 19

5 - 26

10 - 40

10 - 45

10 - 45

15 - 60

15 - 79

45 - 130

5 - 19

5 - 19

10 - 38

10 - 38

10 - 38

24 - 60

24 - 79

45 - 130

0.6 - 2.1

0.6 - 2.9

1.1 - 4.5

1.1 - 5.1

1.1 - 5.1

1.7 - 6.8

1.7 - 8.9

5.1 - 14.7

0.6 - 2.1

0.6 - 2.1

1.1 - 4.3

1.1 - 4.3

1.1 - 4.3

2.7 - 6.8

2.7 - 8.9

5.1 - 14.7

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

1/4”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

3/8”

11

11

11

11

11

11

11

11

Trigger Start - P Handle - Clecomatic Clutch

3-Chamber Motor Housing

Expansion chamber

Pulse Unit

18

The new Cleco H-Series pulse tools combine legendary durability with unmatched repeatability so that you will be able to complete every joint quickly and reliably.

Broad Tool SelectionWith a variety of shut-off and non-shut-off pulse tools to choose from you are sure to nd just the right Cleco pulse tool for the job.

Pulse Nutrunners

Durable

Economical

Low Maintenance

High Precision Shut-Offmechanism ranges close to the characteristics of an electric tool at a tolerance of +/- 10% at Six Sigma.

■ Improved Tool Endwith axial force protection

Reduced Tool Maintenance● New patented double chambered pulse unit with built-in automatic oil reserve● Up to 500,000 tightening cycles before the rst service

Efcient 3-Chamber Air Motor ● Speed govenor● Reduces your tightening time with increased torque and a usable high-end dynamic. ● Unique design reduces blade wear.● Less vibration for increased user comfort● Reduced air consumption

19

Pulse Nutrunners

TORQUE(Nm)

M5

M6

M7

M8

M10

M12

M14

PULSE TOOL TORQUE RANGES

PISTOL INLINE

M16

7PTHH7PHH

11PTHH11PHH

20PTHH20PHH

15STH 35PTHH35PHH

55PTHH55PHH

80PTHH80PHH

120PTHH120PHH

140PTH140PH

160PTH160PH

250PTH 400PTH250PH 400PH

7STH 15STH 35STH110PTHH110PHH

Easy Set-Up

● Insert 2mm hex

into rear port of tool

● Positive stops in both

directions to prevent

loss and/or damage

Ships Ready For Error Proong

● Works with existing TVP torque verier

● Located near air inlet to maximize ergonomics

Standard air signal indicating tool shutoff for use with Cleco TVP Error Proong System.

Adjustable Motor Speed

● Easily adjustable motor speed to insure accuracy on hard joints

● Can be locked in place to prevent accidental adjustment

Low Noise Levels

Noise levels of these tools are well below standard air tools for an operator-friendly environment. There is no loud metallic hammering under load.

20

Inline Screwdrivers

2 SERIESTorque Range:

0.06 - 0.9 Nm

0.5 - 8 In. Lbs.

• Push-to-start

• Push button reverse

• External torque adjustment

• 1/4” quick change chuck

FEA

TU

RES:

2, 19, 8, 88, 35 Series Clecomatic Clutch

2RSA-10SB


0.6 - 14.7 Nm

5 - 130 In. Lbs.

• Push-to-start and Push & Lever start


• Bit & Finder & 1/4” quick change chuckFEA

TU

RES:


1.7 - 8.5 Nm

15 - 75 In. Lbs.

• Push button reverse and non-reversible


• Bit & Finder and Quick changeFEA

TU

RES:


1.7 - 19 Nm

15 - 170 In. Lbs.

• Push button reverse and non-reversible


• Quick change & 3/8” square driveFEA

TU

RES:


1.7 - 20 Nm

15 - 180 In. Lbs.

• Quick change and square drive

• Short stroke button reverse


(Quick change models)

FEA

TU

RES:

19SPA05Q 19SCA05Q

88RSA-5CQ

8RSA-10BQ

35RSA-10-3

21

Angle Nutrunners


0.5 – 11 Nm

4.0 – 100 In. Lbs.

• Class-leading accuracy and repeatability


• Sliding knob reverse

• 1/4” & 3/8” square driveFEA

TU

RES:



4.0 – 23 Nm

3.0 – 17 ft. Lbs.


• 3/8” square drive

• Indexable anglehead

• One torque spring to meet specified torque

• Oiless blades

FEA

TU

RES:


8.0 – 75 Nm

4.0 – 55 ft. Lbs.


• 3/8” and 1/2” square drive

• Indexable anglehead

• One torque spring to meet specified torque

• Oiless blades

FEA

TU

RES:

19RAA07AH2

24RAA11AL3

34RAA33Ax3

Model Number Example

Torque Control

A – Clecomatic

S – Stall

Maximum Torque Nm

(Rounded to the nearest Nm)

Series

192434

Tool Style

A – Right Angle

Rotation

R -Reversible

24 R A A 23 A M 3

Square Drive

2 – 1/4” (AL only)

3 – 3/8”

4 – 1/2” (AZ only)

Angle Head Size

L – Light Duty

M – Medium Duty

H – Heavy Duty

X – Extra Heavy Duty

Z – Super Heavy Duty

Tool Termination

A Angle head

22

Angle Nutrunners


28 – 115 Nm

21 – 85 ft. Lbs.

• Button start

• Reversible & non-reversible


• 1/2” square driveFEA

TU

RES:



32 – 176 Nm

24 – 130 ft. Lbs.

• Lever start



• Rotating exhaust deflector

• 1/2” square drive

FEA

TU

RES:


95 – 430 Nm

70 – 320 ft. Lbs.

• Lever start



• Rotating exhaust deflector

• 1/2” & 3/4” square drive

FEA

TU

RES:

55RnAL-3T-4

75RnAL-2x-4

45RnAb-3P-4

45, 55 & 75 Model Number Example

Torque Control

A – Clecomatic

– – Stall

Start Type

L – Lever

B – Button

Series

45, 55, 75

Nutrunner

Rotation

N-Non Reversible

R -Reversible

55 R N A L - XX X - X

Sq. Drive

3 – 3/8”

4 – 1/2”

6 – 3/4”

Angle Head

P, T, V, X

Gear Train

2, 3, 4, 6, 7, 10

23

Angle Nutrunners

19 SERIESReversibleTorque Range:

3.2 – 6.2 Nm

2.3 – 4.6 ft. Lbs.

• Lever start

• Sliding knob reverseFEA

TU

RES:

19, 24, 34, 45, 55 & 75 Series Stall – Reversible & Non-Reversible


13 Nm

9.6 ft. Lbs.

• Lever start

• Twist ring reverseFEA

TU

RES:


11 - 36 Nm

8.1 - 26 ft. Lbs.

• Lever start


TU

RES:


62 - 125 Nm

46 - 92 ft. Lbs.

• Button start


TU

RES:

55 SERIESReversible & Non-ReversibleTorque Range:

56 - 203 Nm

41 - 150 ft. Lbs.

• Lever start

• Reversible & non-reversibleFEA

TU

RES:

75 SERIESReversible & Non-ReversibleTorque Range:

210 - 475 Nm

155 - 350 ft. Lbs.

• Lever start

• Reversible & non-reversibleFEA

TU

RES:

55RNL-3T-4

34RAS36AX3

19RAS04AH2

75NL-3V-4

45RNB-2T-4

24RAS13AM3

Corded Electric Assembly Tools|

24

30 SERIES - RIGHT ANGLE low torque applications

TORQUE RANGE

ft. lbs. lbs. kgRPM

WEIGHTSPEED

30EAN06EA3

30EAN12EA3

30EAN21FA3

30EAN28FA3

0.9-4.4

1.9-8.8

3.2-15.4

4.2-20.6

1.3-6

2.6-12

4.4-21

5.7-28

Nm

2925

1450

835

615

2.5

2.5

2.9

2.9

1.13

1.14

1.32

1.32

in. mm

LENGTH

14.96

14.96

16.06

16.06

380

380

408

408

MODELNUMBER

in. mm

SIDE TO CENTER

0.48

0.48

0.65

0.65

12.3

12.3

16.4

16.4

in. mm

HEIGHT

1.42

1.42

1.58

1.58

36

36

40.25

40.25

OUTPUTDRIVE

3/8 Sq. Dr.

3/8 Sq. Dr.

3/8 Sq. Dr.

3/8 Sq. Dr.

50 SERIES - RIGHT ANGLE medium torque applications

TORQUE RANGE

ft. lbs. lbs. kgRPM

WEIGHTSPEED

50EAN30FA3

50EAN39GA3

50EAN59HA3

50EAN80JA4

50EAN110KA4

50EAN150KB4

50EAN205NA6

4.4-22.1

5.9-28.7

8.8-43.5

11.8-59.0

16.2-80.3

23.6-110.6

30.2-151.2

6.0-30

8.0-39

12-59

16-80

22-109

32-150

41-205

Nm

1765

1375

915

670

475

320

250

3.5

3.9

4.3

4.8

6.1

8.3

8.7

1.60

1.77

1.94

2.17

2.76

3.75

3.93

in. mm

LENGTH

17.68

18.19

18.27

18.62

19.41

22.01

22.13

449

462

464

473

493

559

562

MODELNUMBER

in. mm

SIDE TO CENTER

0.65

0.66

0.75

0.90

1.00

1.03

1.16

16.4

16.7

19.0

22.8

25.3

26.2

29.5

in. mm

HEIGHT

1.58

1.76

2.02

1.91

2.37

2.54

2.44

40.25

44.63

51.35

48.48

60.30

64.48

61.95

OUTPUTDRIVE

3/8 Sq. Dr.

3/8 Sq. Dr.

3/8 Sq. Dr.

1/2 Sq. Dr.

1/2 Sq. Dr.

1/2 Sq. Dr.

3/4 Sq. Dr.

TOOL CABLE

lbs. kg

WEIGHT

961560-010

961560-020

961560-030

961560-040

961560-060

961560-080

961560-100

961560-120

961560-150

1.1

1.4

1.7

2.1

2.7

3.4

3.9

4.6

5.6

0.50

0.65

0.79

0.94

1.23

1.52

1.81

2.10

2.53

m ft

LENGTH

1

2

3

4

6

8

10

12

15

3.3

6.6

9.8

13.1

19.7

26.2

32.8

39.4

49.2

MODELNUMBER

EXTENSION CABLE

lbs. kg

WEIGHT

961561-010

961561-030

961561-050

961561-060

961561-080

961561-100

961561-150

961561-200

961561-250

0.8

1.5

2.1

2.4

3.1

3.7

5.3

6.9

8.5

0.38

0.67

0.96

1.11

1.40

1.69

2.41

3.14

3.86

m ft

LENGTH

1

3

5

6

8

10

15

20

25

3.3

9.8

16.4

19.7

26.2

32.8

49.2

65.6

82

MODELNUMBER

CONTROLLER

TOOL COMPATIBILITY

lbs. kg

WEIGHT

mPro400GCD-PCleco NeoTek 30/50 Series, 18/48 Series,

17/47/67 Series*, LiveWire, Intelligent Spindles**29.5 13.4

in. mm

WIDTH

10.3 261.62

MODELNUMBER

in. mm

HEIGHT

14.9 378.46

in. mm

DEPTH

12.9 327.66

*Adapter cable required for 17/47/67 Series tool**Requires quote to accommodate hardware configurations

MECHANICAL ACCESSORIES

T50-3000048

T50-3000060

T50-3000063

T50-3000061

T50-3000064

T50-3000065

T50-3000066

T50-3000067

T50-3000068

T50-3000072

T50-3000071

T50-3000069

T50-3000070

PART NUMBER

Suspension Bail - Fixed

Suspension Bail - Offset, Fixed

Suspension Bail - Swivel

Suspension Bail - Offset, Swivel

Reaction Bar - 59 Nm





Body Extension - 59 Nm



Body Extension - 150 and 205 Nm

TYPE

ELECTRICAL ACCESSORIES

942391PT

942396PT

943462PT

961789PT

PART NUMBER

Camera Scanner

Gyroscope

Tool Light

17 / 47 / 67 Series Tool Adapter Cable

TYPE

“ABS House”Plot No. W-116 (A),

T.T.C. Industrial Area,

MIDC Khairane,

Navi Mumbai - 400 708. INDIA.

Tel: +91 22 4171 4444

Since 1998

Documents

CLECO - DC TOOL catalogue...Cleco/DGD tightening controller or suitable PC software. Batterie weights: 26-V Li-Ion battery 0,50 kg, 44V Li-Ion battery 0,85 kg Extra Equipment: Scanner,