CleanStation patented "Heat, Agitation, and Flow" technology is not load sensitive. Unlike ultrasonic cleaning tanks, all CleanStation systems are capable of efficient "batch processing." The CleanStation SRS II is a heavy duty, "profes- sional grade" support removal optimized to accommodate large FDM parts and quantities of DDM parts. To protect delicate parts, the system is equipped with active cooling to prevent warping and de-lamination due to overheating. The SRS II is also available with a variable flow option which allows operators to control jet flow rates. The SRS II is mobile and self contained. It is mounted on lockable casters and and equipped with appliance style "quick disconnect" plumbing. It may be hard wired and plumbed into place or rolled from one space to another. SRS II Product Specifications * large capacity high performance CleanStation® * 16”x 14”x 16”work envelope * 3584 cubic inch, 17 gallon, stainless steel tank * integrated rinse sink and faucet * “single touch” automated control * programmable for time and temperature * 3000 watt heater * 1 hour warm up * circulation: 167% per minute * quick disconnect, appliance style plumbing * single phase 240v, 20 amp service * rolls on locking casters * high efficiency single point manifold * hinged and locking tank lid, hinged basket lid * Recessed “no drip” top * 1 year warranty * Shipping weight 430lbs CleanStation-SRS.com CleanStation® “First Choice of FDM Professionals” PM Technologies PO Box 493 Osseo, MN 55369 Supports the Fortus 360MC and 400MC Product Info: 763-425-1383 x102 or [email protected] Waterworks, Dimension, uPrint and uPrint Plus are registered trademarks of Stratasys Corp. HP and HP Design-Jet 3D printer are registered trademarks of Hewlett-Packard Co. TM

CleanStation - R&D Technologies, Inc. · 2014-08-04 · CleanStation-SRS.com CleanStation® “First Choice of FDM Professionals” PM Technologies PO Box 493 Osseo, MN 55369 Supports

Download PDF Report

Upload
others
View
0
Download
0

Embed Size (px)

Citation preview

Page 1: CleanStation - R&D Technologies, Inc. · 2014-08-04 · CleanStation-SRS.com CleanStation® “First Choice of FDM Professionals” PM Technologies PO Box 493 Osseo, MN 55369 Supports

CleanStation patented "Heat, Agitation, and Flow" technology is not load sensitive. Unlike ultrasonic cleaning tanks, all CleanStation systems are capable of e�cient "batch processing."

The CleanStation SRS II is a heavy duty, "profes-sional grade" support removal optimized to accommodate large FDM parts and quantities of DDM parts.

To protect delicate parts, the system is equipped with active cooling to prevent warping and de-lamination due to overheating. The SRS II is also available with a variable �ow option which allows operators to control jet �ow rates.

The SRS II is mobile and self contained. It is mounted on lockable casters and and equipped with appliance style "quick disconnect" plumbing. It may be hard wired and plumbed into place or rolled from one space to another.

SRS II

Product Speci�cations * large capacity high performance CleanStation® * 16”x 14”x 16”work envelope * 3584 cubic inch, 17 gallon, stainless steel tank * integrated rinse sink and faucet * “single touch” automated control * programmable for time and temperature * 3000 watt heater * 1 hour warm up * circulation: 167% per minute * quick disconnect, appliance style plumbing * single phase 240v, 20 amp service * rolls on locking casters * high e�ciency single point manifold * hinged and locking tank lid, hinged basket lid * Recessed “no drip” top * 1 year warranty * Shipping weight 430lbs

CleanStation-SRS.com

CleanStation®“First Choice of FDM Professionals”

PM TechnologiesPO Box 493

Osseo, MN 55369

Supports the Fortus 360MC and 400MC

Product Info: 763-425-1383 x102 or [email protected]

Waterworks, Dimension, uPrint and uPrint Plus are registered trademarks of Stratasys Corp. HP and HP Design-Jet 3D printer are registered trademarks of Hewlett-Packard Co.