Upload
stuart-goodswen
View
216
Download
0
Embed Size (px)
Citation preview
8/12/2019 CleanSafe 787C-(Tech Data Sheet).
1/2
CleanSafe 787C is a high performance aqueouscleaning agent specially designed for spray-in-air andagitated immersion equipment.
CleanSafe 787Cis selected when a very low-foamingcleaner with excellent substrate compatibility and lowlevels of volatile organic compounds (VOCs) is
required.
CleanSafe 787Ceffectively removes a wide range ofsoils such as drawing and stamping oils, coolants,synthetics and other metalworking fluids.
CleanSafe 787C is safe for use on ferrous and non-ferrous alloys such as untreated aluminum, alodinedand anodized aluminum, copper and copper alloys,titanium, magnesium and steels. It is also compatiblewith polymeric substrates and elastomers.
CleanSafe 787C is a Boeing BAC 5763 (Type IIGrade A) approved cleaner, permitting its use onfaying surfaces or areas of entrapment. It also meetsaerospace compatibility testing for HydrogenEmbrittlement, Sandwich Corrosion and StressCorrosion of Titanium.
CleanSafe 787C is a phosphate-free cleaner,designed for low environmental impact. It does notcontain nonylphenol ethoxylates (NPEs) or alkyphenol
ethoxylates (APEs) and is approved by the SouthCoast Air Quality Management District (SCAQMD) asa Clean Air Solvent.
CleanSafe 787C is supported by a global network oftechnical representatives, capable of solving theindustries most difficult cleaning applications.
CleanSafe787C
Technical Data Sheet
FEATURES & BENEFITS
Very Low-Foaming BiodegradableMaterial Compatibility Low-VOCAerospace Approvals/Testing NPE/APE-freeSCAQMD approved Phosphate-freeOil-Splitting Non-Corrosive
PROPERTIES
Spray-in Air Cleaning:AddCleanSafe 787Cto the wash tank,using a concentration between 3-10% by volume. Typicaloperating temperatures range between 100-180F (38-82C).
Immersion Cleaning: Add CleanSafe 787Cto the wash tank,using a concentration between 5-15% by volume. Typicaloperating temperatures range between 100-180F (38-82C).
PROCESS
Appearance.Clear liquid
Solubility in Water.....Complete
Odor..Mild
Flash PointN/A
Specific Gravity (25C)..1.08
pH value (100%).12.0
COD value (0.1%)..383 mg/L
VOC (20%)...18 g/L
Bath Monitoring.Titration
SOILS REMOVED
Mineral Oils Water-Soluble Oils
Synthetic Oils Coolants
Rust Inhibitors Buffing Compounds
Lubricating Oils Fingerprint Oil
Particulate Matter DustCleanSafe is a trademark of Petroferm Inc.
8/12/2019 CleanSafe 787C-(Tech Data Sheet).
2/2