Cleanroom display123-series | single and multiple display

Climate visualizationand statusin one display

Climate visualization and status in one display

• Access control• Locks• Monitoring• Increase awareness & behavior of staff• Door movements

Applications

T RHdP

count

etc.

visual and acoustic alarm

modern, smooth and compact design

communication with SPS/BMS

climate visualization and statusT

RH

dP

count

etc.

• Semi-flush wall mounting Thickness of front panel only 2 mm with rounded edges, no protruding parts.

• Easy to clean Flat escutcheon, suitable for cleaning with, for example, hydrogen peroxide (H2O2).

• Shallow installation depth Suitable for almost every cavity wall.

• Snap-in design Automatic securing mechanism, no tools needed, no screws visible in panel.

• 1 to 4 values visible Uniformity: one design for various functions and locations.

• Alarm Visual display with green/red and release audible alarm.

Design

The 123-series displays for cleanrooms, operating rooms and laboratories enable you to see whether or not the climate in the working environment is good or bad (for example: temperature, differential pressure, relative humidity, door movements, dust particles) at a glance.

The 123-series includes two displays: the single 123-2C with visualization of the measured values, and the multiple 123-2touch with visualization of 1 to 4 measured values. The status of the climate in the working environment is instantly visible with two colors. The color changes from green to red when the climate reaches a value beyond specifications. Besides color, the measured value and location are also shown in the display.

The 123-2C and 123-2touch display can communicate seamlessly with your building management system (BMS).

In addition to the 123-series a complete monitoring system is available for measuring, recording, viewing, controlling and alarming in cleanrooms: 123-2max. Ask our specialists about the possibilities!

123-2C 123-2touChBenefits - For 1 measured value

- Semi-flush with the wall, flat foil, no edges- Display in green and red for alarm or OK-status- Programming at your choice- Suitable for various input signals, not brand-specific- Snap-in- Flat, not protruding buttons- Sound alarm

- For 1 to 4 measured values- Semi-flush with the wall, flat foil, no buttons, no edges- Display in green and red for alarm or OK-status- Programming at your choice- Suitable for various input signals, not brand-specific- Snap-in- Touch screen- Sound alarm

Specifications - Graphic 128 x 64 pixels display- Adjustments with flat keys on the front

- Graphic 3,5” TFT display- Touchscreen- 1 to 4 values visible

Dimensions 120 x 120 mm 150 x 120 mm

Installation dimensions (hxwxd) 106 x 106 x 55 mm (junction box included) 127 x 107 x 50 mm (plugs included)

Power 2 VA 12 VA

Voltage 24V AC/DC 24V AC/DC

Operating temperature -10/+50°C -10/+50°C

Inputs Several input possibilities: 0-10V, 0/4-20mA, PT100, PT1000, thermocouple, frequency, counter, digital, etc.

4 x digital input4 x 0/4-20mA / 0-10V analog input

Outputs 2 x relay output 2 x relay output

Digital communication RS 485 - Modbus EthernetModbus

USB connector - Standard PC compatible

Storage - Program stored on Micro SD

Applications CleanroomsOperating roomsLaboratories

CleanroomsOperating roomsLaboratories

Specifications

Cleanroom monitoring / GMP

• housing with connectors Protection of electronics, easy installing preparation (fixed wall cutout dimensions for all displays).

• Easy control and programming Touch screen / flat buttons.

• Analog + digital input Suitable for various sensors, not brand-specific.

• utP connector / Ethernet Suitable for network (123-2touch).

• uSB Easy preprogramming (123-2touch).

• Modbus 2-wire communication between sensors and display, between displays and easy communication with existing BMS.

• Flexible programming One model for all applications (quantity / measured value).

• Simple menu structure Easy programming via touch-screen/flat buttons, USB and Modbus RTU.

• Program stored on Micro SD Settings exchangeable (123-2touch).

Technical specifications

T RHdP

count

etc.

visual and acoustic alarm

modern, smooth and compact design

communication with SPS/BMS

climate visualization and statusT

RH

dP

count

etc.

• Winner of technology Award The 123-2touch was chosen as the winner of the Novelties in Technology Award during the exhibition “HET Instrument 2012”.

• Easy to install With preprogramming by Pedak.

• Calibration and maintenance in our calibration laboratory or at your location Pedak has its own technical department with many possibilities for calibration, service and maintenance regardless of the brand of your measurement equipment.

The 123-series is suitable for various sensors and is not brand specific. For optimal indoor air quality it is important to use sensors with high accuracy, reliability and reproducibility.

Our sensors for relative humidity, temperature, differential pressure, etc. fit perfectly to the demand for a high indoor air quality.

SensorsRelative humidity, temperature, differential pressure, etc.

Roorveld 1 | 6093 PL Heythuysen (NL)T +31 (0)475 49 74 24E info@pedak.nl | W www.pedak.nl

hygienicsimple

clearmonitoring

user-friendlythe solution

More information? Ask our specialists for advice!