Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Cleaning the HhC 1618, 2020, and 2620 Ovens
IDLE
BACK
OFF
EM
ERGENC
Y
STOP
High h Conveyor by TurboChef TM
IDLE
BACK
OFF
EM
ERGENC
Y
STOP
High h Conveyor by TurboChef TM
IDLE
BACK
OFF
EM
ERGENC
Y
STOP
High h Conveyor by TurboChef TM
COOKINGBELT10:00
BREAKFAST TOP AIR 80%
BTM AIR 80%
SET475F
COOLING DOWN
LUNCH
BREAKFAST PIZZA
WINGS
OVEN OFF
LUNCH
BREAKFAST PIZZA
WINGS
1. 5.
2.
3.
6.
7.
4.
8.
Supplies and Equipment
Legend
= Wash, rinse, and sanitize. = Completely dry and wipe with a clean towel.
Part Number: DOC-1082 / Rev E / August 2013Country Code: NA/EU
Customer Service: 800.90TURBO (within U.S.)Customer Service: +1 214-379-6000 (outside U.S.)©2008-2013 TurboChef Technologies, Inc. tm
Follow the steps below daily to help maintain your oven. DO NOT clean the oven using a water jet.
Daily Cleaning Instructions–TurboChef-approved oven cleaner (ventless models must be cleaned with TurboChef Oven Cleaner only), nylon scrub pad, cleaning towels, disposable gloves.
Use only TurboChef-approved cleaner, part number 103180. WARNING: DO NOT attempt to clean the oven until it has cooled (screen reads “Oven Off”). WARNING: DO NOT use a water jet when cleaning the oven. WARNING: Always disconnect power before cleaning or servicing oven.
Press the Back/Off key until the oven begins cooling down. Allow the oven to completely cool (screen will say “Oven Off”), then unplug.
Wipe the oven exterior with a clean, damp towel. Once cleaning is finished, plug the oven in.
1.
2.
3.
4.
Step 5: Replace Oven Components
1
22
1
2
6.
7.
8.
9.
5.
Latch
Step 7: Ready the Oven for Use
1.
2.
Step 6: Verify Chain Tension
Acceptable - Chain (A) is tight andeasily clears crumb tray holder (B)
A
B
Call service to have link removed - Chain (A) isloose and risks contact with crumb tray holder (B)
A
B
See detail below.
1.
2.
3.
4.
Step 5: Replace Oven Components
1
22
1
2
6.
7.
8.
9.
5.
Latch
Step 7: Ready the Oven for Use
1.
2.
Step 6: Verify Chain Tension
Acceptable - Chain (A) is tight andeasily clears crumb tray holder (B)
A
B
Call service to have link removed - Chain (A) isloose and risks contact with crumb tray holder (B)
A
B
See detail below.
1.
2.
3.
4.
Step 5: Replace Oven Components
1
22
1
2
6.
7.
8.
9.
5.
Latch
Step 7: Ready the Oven for Use
1.
2.
Step 6: Verify Chain Tension
Acceptable - Chain (A) is tight andeasily clears crumb tray holder (B)
A
B
Call service to have link removed - Chain (A) isloose and risks contact with crumb tray holder (B)
A
B
See detail below.
1.
2.
3.
4.
Step 5: Replace Oven Components
1
22
1
2
6.
7.
8.
9.
5.
Latch
Step 7: Ready the Oven for Use
1.
2.
Step 6: Verify Chain Tension
Acceptable - Chain (A) is tight andeasily clears crumb tray holder (B)
A
B
Call service to have link removed - Chain (A) isloose and risks contact with crumb tray holder (B)
A
B
See detail below.
1.
2.
3.
4.
Step 5: Replace Oven Components
1
22
1
2
6.
7.
8.
9.
5.
Latch
Step 7: Ready the Oven for Use
1.
2.
Step 6: Verify Chain Tension
Acceptable - Chain (A) is tight andeasily clears crumb tray holder (B)
A
B
Call service to have link removed - Chain (A) isloose and risks contact with crumb tray holder (B)
A
B
See detail below.
F.
G.
Step 1: Turn the Oven Off
Step 2: Remove Outer Oven Components
E.
1.
2.
3.
4.
Step 5: Replace Oven Components
1
22
1
2
6.
7.
8.
9.
5.
Latch
Step 7: Ready the Oven for Use
1.
2.
Step 6: Verify Chain Tension
Acceptable - Chain (A) is tight andeasily clears crumb tray holder (B)
A
B
Call service to have link removed - Chain (A) isloose and risks contact with crumb tray holder (B)
A
B
See detail below.
1.
2.
3.
4.
Step 5: Replace Oven Components
1
22
1
2
6.
7.
8.
9.
5.
Latch
Step 7: Ready the Oven for Use
1.
2.
Step 6: Verify Chain Tension
Acceptable - Chain (A) is tight andeasily clears crumb tray holder (B)
A
B
Call service to have link removed - Chain (A) isloose and risks contact with crumb tray holder (B)
A
B
See detail below.
2.
1.
3.
5.
4.
Step
2:R
emov
eO
uter
Ove
n
Step
2:C
ompo
nent
sStep 5: Replace Oven Components, Continued
Step 6: Verify Chain Tension
Step 7: Ready the Oven for Use
A.
B.
2.
1.
3.
5.
4.
Step 2: Remove Outer OvenStep 2: Components
2.
1.
3.
5.
4.
Step 2: Remove
Outer O
ven
Step 2: Components
1.
2.
3.
4.
5.
Step 3: Remove Inner OvenStep 3: Components
1
2
21 1
2
11
C.
1.
2.
3.
4.
5.
Step 3: Remove Inner OvenStep 3: Components
1
2
21 1
2
11
A.
1.
2.
3.
4.
5.
Step 3: Remove Inner OvenStep 3: Components
1
2
21 1
2
11
B.
NOTE: Certain oven models are equipped with a side-swing front hatch. To remove the side-swing front hatch, unlatch and fully open it, then lift the front hatch upwards and off its hinges.
2.
1.
3.
5.
4.
Step 2: Remove Outer OvenStep 2: Components
C.
Step 3: Remove Inner Oven Components
1
1 1
2
2
Step 3: Remove Inner Oven Components, Continued
2.
4.
Step 4: Clean Oven Components
1.
3.
5.
6.
7.
Replace filters if damaged or torn.
2.
4.
Step 4: Clean Oven Components
1.
3.
5.
6.
7.
Replace filters if damaged or torn.
2.
4.
Step 4: Clean Oven Components
1.
3.
5.
6.
7.
Replace filters if damaged or torn.
2.
4.
Step 4: Clean Oven Components
1.
3.
5.
6.
7.
Replace filters if damaged or torn.
2.
4.
Step 4: Clean Oven Components
1.
3.
5.
6.
7.
Replace filters if damaged or torn.
2.
4.
Step 4: Clean Oven Components
1.
3.
5.
6.
7.
Replace filters if damaged or torn.
2.
4.
Step 4: Clean Oven Components
1.
3.
5.
6.
7.
Replace filters if damaged or torn.
* Replace filters if damaged or torn.
*
Wash, rinse, sanitize, and dry the following components, and wipe out the oven cavity.
D.
E.
A.
B.
C.
D.
Step 4: Clean Oven Components
Step 5: Replace Oven Components
1.
2.
3.
4.
5.
Step 3: Remove Inner OvenStep 3: Components
1
2
21 1
2
11
1.
2.
3.
4.
5.
Step 3: Remove Inner OvenStep 3: Components
1
2
21 1
2
11
1 1
2
1.
2.
3.
4.
Step 5: Replace Oven Components
1
22
1
2
6.
7.
8.
9.
5.
Latch
Step 7: Ready the Oven for Use
1.
2.
Step 6: Verify Chain Tension
Acceptable - Chain (A) is tight andeasily clears crumb tray holder (B)
A
B
Call service to have link removed - Chain (A) isloose and risks contact with crumb tray holder (B)
A
B
See detail below.
1.
2.
3.
4.
Step 5: Replace Oven Components
1
22
1
2
6.
7.
8.
9.
5.
Latch
Step 7: Ready the Oven for Use
1.
2.
Step 6: Verify Chain Tension
Acceptable - Chain (A) is tight andeasily clears crumb tray holder (B)
A
B
Call service to have link removed - Chain (A) isloose and risks contact with crumb tray holder (B)
A
B
See detail below.
1.
2.
3.
4.
Step 5: Replace Oven Components
1
22
1
2
6.
7.
8.
9.
5.
Latch
Step 7: Ready the Oven for Use
1.
2.
Step 6: Verify Chain Tension
Acceptable - Chain (A) is tight andeasily clears crumb tray holder (B)
A
B
Call service to have link removed - Chain (A) isloose and risks contact with crumb tray holder (B)
A
B
See detail below.
1.
2.
3.
4.
Step 5: Replace Oven Components
1
22
1
2
6.
7.
8.
9.
5.
Latch
Step 7: Ready the Oven for Use
1.
2.
Step 6: Verify Chain Tension
Acceptable - Chain (A) is tight andeasily clears crumb tray holder (B)
A
B
Call service to have link removed - Chain (A) isloose and risks contact with crumb tray holder (B)
A
B
See detail below.
1
2 2
1
2
Supplies and EquipmentTurboChef-approved oven cleaner (ventless models must be cleaned with TurboChef Oven Cleaner only), nylon scrub pad, cleaning towels, disposable gloves
!
!
!
!
Follow the steps below weekly to help maintain your oven. DO NOT clean the oven using a water jet.
Weekly Cleaning Instructions