Cleaning and disinfection systems for cleanrooms · 2019. 9. 20. · PPS Cleanroom PPS Hospital Expertise in the health care industry Hygienic cleanliness and efﬁciently designed,

Cleaning and disinfection systems for cleanroomsThe consulting catalogue foreffective contamination control

Cleanliness lies in detail

2

3

For more than 40 years we have been

working on the development and

production of professional cleaning

equipment. The name of our company

– Pfennig Reinigungstechnik – is based

on the fact that, for us, a product's

technical components are always at

the forefront. As a master craftsman

for professional building cleaning, I am

very cognisant of what a good clean-

ing system should be: an efficient tool

for the production of the commodity

cleanliness. Since in controlled areas,

the term “cleanliness” is subject to a

completely different meaning than is

the case in standard building cleaning

services, in 1999 we decided to rise

to this chalenge by using an entirely

newly developed product line: The

Clino CR cleaning and disinfection

system.

Clino CR was the first system of its

kind certified for the use in clean-

rooms. Since then, we have continu-

ously been improving it.

In the meantime, the segment “spe-

cial solutions for cleanrooms” has

developed into its own business unit

within our company. Initially, this busi-

ness segment was operated based on

Dipl.-Kfm. Dietmar PfennigMaster Craftsman for Professional Building CleaningManaging Director

Herbert PfennigFounder

our own inquisitiveness and our

fascination for its technical feasibility.

For this reason, from now on we will

publish a specific catalogue just for

cleanrooms. This catalogue will

supplement our overall corporate

catalogue. This is our first issue.

In this issue, when we now and then

refer to “systems”, we do not only

mean the alignment of the individual

components to each other: we retain a

significant network to manufacturers

of cleaning and disinfection agents,

cleanroom laundries and other

suppliers of specialised cleanroom

services. Our goal is not to offer you

individual components, but always an

aligned system solution.

If you ever need anything that you are

unable to find in our brochure or if

you're looking for a specialised

solution, then talk to us. We look for-

ward to hearing from you.

Sincerely,

Dietmar Pfennig

Welcome

4

5

Contents

The company Page 6

Innovation and service Page 8

Range of applications – PPS business units Page 10

Cleanroom classification Page 12

PPS System Cycle Page 14

In clean rooms, cold and hard facts dictate Page 16

Cleaning methods Page 19

Impregnation EasyMop GMP and CR Page 20

MopFloat GMP and CR Page 26

Flat wringer Ringo GMP and Clino stainless steel Page 28

Additional cleaning and disinfection methods Page 30

Hygienic zone concept Page 32

Surface cleaning Page 33

Clino Connect – the clean connection Page 34

Disposal variants Page 35

Contactless working with MopDrop Page 36

Sterile disposal bags Page 37

Cleanroom-compliant trolley design Page 38

The Clino CR model series Page 39

Clino CR trolley systems with impregnation of EasyMop GMP and CR Page 40

Clino CR trolley systems with MopFloat GMP and CR Page 46

Clino CR trolley systems with flat wringer Ringo GMP and Clino stainless steel Page 50

Clino trolley systems for grey areas Page 56

PPS components for cleanroom system trolleys Page 62

Look behind the scenes Page 73

Cleanroom vacuum Clino KR /A Page 74

Cleanroom-suitable mop design Page 78

Special mops – reusable Page 80

Special mops – single-use and accessories Page 86

Mops for grey areas Page 90

Mop frames and handles Page 94

Clino CR wiper programme Page 96

Problem solver for special cases Page 99

Subject index Page 102

6

The Pfennig Reinigungstechnik building and premises in Durach

We are able to work in a place where

others spend their holidays – in Ober-

allgäu, situated directly at the edge of

the Alps. We have been located in Du-

rach since the company’s founding in

1974. Based on our location in the mid-

dle of Germany’s southernmost admin-

istrative district and the traditional spe-

cialisation of the Allgäu-based industry

on mechanical engineering and plastics

technology, we have first-class employ-

ees and access to a comprehensive

network of specialists at our suppliers.

Our – or your – ideas take shape at

this location.

Brought to life on the most modern

CAD workstations, we build and test

prototypes and mount the series mod-

els in a ready-to-use manner. From

this location we also deliver our prod-

ucts using our own vehicles, through a

forwarding agent, or through special-

ised wholesale trade – all based on

your wishes. All of our products are

based on our own developments. We

own all tools, forms and proprietary

rights. This fact guarantees that we re-

main independent and it guarantees

that you will continue receiving reliable

products.

Allgäu Alps: Seealpsee near Oberstdorf

Being an entrepreneur also means to assume social responsibility

PPS Pfennig – the company

The Pfennig Foundation

Around the globe, about 16,000 Sale-

sians of Don Bosco work in more than

130 countries to help underprivileged

children and young adults. As a

member of the Don Bosco Foundation

Centre, the “Pfennig Foundation” sup-

ports this work.

7

Planning, consulting and sampling:

Based on the PPS system cycle, our in-house and field

specialists will analyse your individual requirements. The

pro ducts that have been aligned to your needs will be

provided to you as a free-of-charge sample to undergo your

own evaluation.

Continuing education and training:

Our highly qualified specialists (master craftsmen in the

field of building cleaning, hygiene engineers) conduct

trai ning seminars in our training facilities in Durach. If

reques ted, they can also conduct training in your regional

offices.

Consulting and support:

With a nationwide sales staff in Germany as well as an

extensive network of dealers domestically and throughout

Europe, we are located near you. Our highly specialised

inside sales staff is available to provide you with telephone

support.

Leasing and financing:

In collaboration with specialised cleanroom laundries, we

offer you a mop leasing concept. This means that you only

pay one flat rate per mop cover used. However, you do not

have to worry about the procurement and preparation. Even

our system trolleys and accessories can be purchased

through either leasing or rent-to-own schemes.

You must react quickly

Our comprehensive Cleanroom warehouse enables us to

meet your requirements and wishes within a 24-hour peri-

od. We retain large volumes of all items inour cleanroom

range in stock. This way we – and you – can react quickly.

The PPS fleet will deliver the products to your

door, if desired.Express

Lieferung

The

Com

pany

88

Copying may be the best form of flattery*,

but we’d rather develop our own products.

We’ve always chosen to take a different path – since 1974

we have been primarily responsible for the development

of many pioneering developments in professional indus-

trial cleaning or played a major role in these. With 16

owned patents, patent applications and utility models –

only in the area of manual cleaning and disinfection of

hygienically sensitive areas – we are one of the most

innovative companies in the industry. * Chinese proverb

1974 Company founding

1988 Stainless steel flat wringer

1990 Stainless steel module system “Clino”

1995 ISO certification as one of the first companies in the industry

1995 Plastic flat wringer “Ringo”

1997 System for the hands-free mop reception “MopJump”

1998 Co-development of the first system for the ready to use machine impregnation of textiles “ProMop”.

1999 Cleaning system for cleanrooms “Clino CR” with Mop King CR with IPA-certification

2000 System for the manual, ready-to-use impregnation of mops “EasyMop”

2009 Special mop for cleanrooms MicroSicuro CR/A

2011 Nordic Ecolabel-certified cleaning concept “PPSC”

2011 Cleaning system for cleanrooms “EasyMop GMP” – the first reproducible and operator-independent system

2013 Extension of the ISO certification to include the development of cleaning equipment for cleanrooms

2013 IPA-certification for the Mop King GMP and MicroSicuro CR/A

2014 Clino MultiBox with impregnation system PlusBox

2014 IPA-certification for single use mop King CR Wiper Mop S

2014 MopFloat: Secure, reproducible and verifiable impregnation of mops

2015 EasyMop GMP system box wins the Innovation award at the ContaminExpo in Paris

Innovations

1999: Clino CR, cleaning system for cleanrooms (entire system is IPA-certified)

2011: EasyMop GMP is the first closed and verifiable cleaning and disinfection system for sterile areas – reproducible and operator-independent (entire system is IPA-certified)

2014: MopFloat GMP, verifiable and operator-independent impregnation of mops through mechanical intelligence. Suitable for sterile areas GMP A/B

2000: System for the manual, ready-to-use impregnation of mops “EasyMop”: The maximum security and efficiency in the cleaning through relinquishing the mechanical components and the operator-independent design

9

The Company – Services

Construction:

Using the modern 3-D engineering software “Solid Works”,

we can depict different solutions – of course, you are more

than welcome to introduce your own ideas.

Flexible manufacturing:

Through the high qualification of our metal, plastic and tex-

tile experts, we can quickly implement your requirements,

including your custom-made product.

Quality:

All of our products are manufactured on our own tools and

forms; since 1995 we have been implementing the quality

management guidelines as per ISO 9001 ff.

Individualisation:

Do you require an individualised product or a special solu-

tion? We are able to realise your wish within a short period

of time using CAD.

10-year spare parts guarantee:

We support the proverbial longevity of our systems through

a 10-year spare parts guarantee as well as a complete

renewal programme for up to 20-year-old stainless steel

system trolleys.

Inno

vatio

n an

d se

rvic

e

10

PPS HospitalPPS Cleanroom

Expertise in the health care industryHygienic cleanliness and efficiently designed, ergonomi-

cally optimised work processes – for over 30 years Clino

system trolleys have proven themselves in hygienically

sensitive areas:

From the major university hospital to the small health

care facility, our EasyMop impregnation processes en-

sure the most stringent hygienic reliability with maximal

flexibility.

Solutions for high-sensitive areasFor 15 years, we have been working to meet the highest

existing demands in the area of manual floor cleaning:

The development of special solutions for the pharmaceu-

tical industry as well as for the manufacturers of semi-

conductors, optical technology and precision engineering.

Our Clino CR cleanroom cleaning system fulfils the fol-

lowing requirements:

Range of applicationsThe activities of Pfennig Reinigungstechnik are divided into the four divisions listed below. This catalogue is limited to the

cleanroom division. Information about our Hospital, Industrial and PPSC divisions is available in our comprehensive

catalogue or at www.pps-pfennig.de.

Latest prior art:

The EasyMop process provides ready-to-use mops

and cloths

Hygienic design:

• Use of stainless steel as a base material

• Completely removable without tools

• Consequent avoidance of using materials that

aren‘t hygienically safe

Colour-coded hygienic zone concept:

Through a colour-coded system of system boxes and

mops, safety is created across all language barriers

PPS mops for use in hospitals:

Long-lasting and durable with the use of all professi-

onal cleaning and disinfection agents

Comprehensive evaluation:

The PPS hospital cleaning system is tested by

independent experts

Safety and verifiability:

Qualification through Fraunhofer IPA

GMP conformity:

Safety, also in sterile areas

Highest efficiency for cleaning and disinfection:

Through intelligent work processes

Safe avoidance of cross-contamination:

Through hands-free mop reception and creation of

zone concepts

Ergonomics and easy to learn:

Ensure resistance against incorrect handling

11

Ergonomics and efficiencyIndustrial cleaning is a trade. In each trade one strives to

find the most efficient production method and to use the

most appropriate tools. For this reason, we provide you

with the flat wringer “Ringo” and the modular Clino

cleaning trolley, which enables the most efficient

technique suited to the respective process and helps

structure work processes in the easiest and most

time-saving manner possible.

PPS Industry PPSC

Professional sustainable cleaningEnsuring the efficient use of resources is a challenge that

goes far beyond the actual manufacturing of a product.

For this reason we have introduced – based on over

40 years of experience in the development and manu-

facturing of professional cleaning tools – an independent

concept with associated product line to the market:

PPSC – Pfennig Professional Sustainable Cleaning.

More efficiency:

Since the mop remains on the mop frame, the

Ringo flat wringer reduces the non-productive

times (such as, for example, detaching the mop,

washing and mounting) to a minimum

More ergonomics:

The entire workflow runs in an ergonomically

efficient manner:

• No more bending

• Much lower weight of the mops

• Higher coverage area per mop

Excellent result:

Maximum cleaning performance through:

• High-tech fibre mixture

• Precise dosability of the moisture level

• Altering between one- and two-stage wiping

technique possible at any time

Sustainable layout of the four core processes of

manual floor cleaning

Certified cleaning textiles:

The mops and cloths designed for the PPSC concept

have been certified in accordance with the extre-

mely demanding »Nordic Environmental Seal« for

tested sustainability

Tried and tested Basis Clino STE:

The multiply proven and tested Clino STE modular

design with rust-free stainless steel frame construc-

tion is a cognisant counterpoint to the »throw-away«

mentality

Comprehensive range of accessories:

For the alignment to object-specific circumstances,

the PPS product line also features a comprehensive

range of accessories

Ran

ge o

f ap

plic

atio

ns –

PP

S b

usin

ess

units

12

Cleanroom classification

The cleaning and disinfection of all

cleanrooms demands efficiency, pro-

cess reliability, cost effectiveness and

must be easy to use. If, however, you

take the different purity classes (ISO

and / or GMP) in different industrial

areas into account, then the clean-

rooms differ according to the require-

ments and regulatory standards:

In the technical industry, all kinds of

particles can lead to disruptions, pro-

duction downtimes, or quality issues.

Thus, the removal of particle contami-

nation is in the foreground; also, the

cleaning equipment itself should not

be a source of particles.

In the industrial areas of medical tech-

nology, non-sterile medical devices,

foodstuff and the cosmetic industry, a

defined safety standard in regards to

particles and microbiological contami-

nation is demanded, however sterility

is not a presupposed condition. To

ensure the hygienic purity, it is impor-

tant that the machines used in the pro-

duction do not import or spread any

contamination. In addition, they must

offer a high level of reliability in daily

use.

The pharmaceutical GMP guidelines

provide clear specifications for the

machines producing pharmaceutical

products in order to prevent health

risks and spoiling.

The equipment must be GMP-

conform, using special materials, and

secure a safe and reproducible wet-

ting.

In order to assist you in your choice of

suitable equipment, we have classi-

fied our products with a cleanroom

class indicator as per the classification

table on the right.

Cleanrooms for the production of non-sterile phar-

maceutical products and medical devices

Cleanrooms for the

technical industry

Cleanrooms for the food

processing industry

ISO 3 4 5 6 7 8 9GMP A/B C D

In order to make it easier to assign the

PPS cleanroom products to the re-

spective cleanroom classes, you can

find this indicator, which folds out, at

the very front of the basic information.

13

Classification comparison of airborne particulate contamination

Nomenclature Maximal allowable number of particles as per ISO 14644-1 [µm / m3]

DIN EN ISO

14644-1

EU-GMP »at rest«

EU- GMP »in Opera-

tion«

US Fed. Std.

209 E*

0,1 µm 0,2 µm 0,3 µm 0,5 µm 1,0 µm 5,0 µm

pro m3 pro ft3 pro m3 pro ft3 pro m3 pro ft3 pro m3 pro ft3 pro m3 pro ft3 pro m3 pro ft3

1 10 0,3 2 0,1

2 100 3 24 1 10 0,3 4 0,1

3 1.000 30 237 7 102 3 35 1 8 0,2

1 1.240 35 265 8 106 3 35 1

4 10.000 300 2.370 67 1.020 29 352 9,9 83 2

10 12.000 340 2.650 75 1.060 29 353 10

5 100.000 2.833 23.700 671 10.200 289 3.520 100 832 24 29 0,8

A A 3.520 100 20 0,6

B 3.520 100 29 0,8

100 26.500 750 10.600 300 3.530 100

6 1.000.000 28.329 237.000 6.710 102.000 2.890 35.200 997 8.320 235 293 8

1.000 35.300 1.000 247 7

7 352.000 9.972 83.200 2.357 2.930 83

C 352.000 9.972 2.900 82

B 352.000 9.972 2.900 82

10.000 353.000 10.000 2.470 70

8 3.520.000 99.716 832.000 23.569 29.300 830

D 3.520.000 99.716 29.000 821

C 3.520.000 99.716 29.000 821

100.000 3.530.000 100.000 24.700 700

9 35.200.000 997.167 8.320.000 235.694 293.000 8.300

* The US Federal Standard 209E was replaced in 2001 by DIN EN ISO 14644-1 and is no longer valid.

Purity classesThe determination of the air quality requirements is performed in the form of purity level classes. In the pharmaceutical industry and in other compa-nies that work in accordance with GMP, a tolera-ble microbiological contamination is also defined.

Classification The purity or level of purity is characterised by the current level of impurity in the air, whereby the size and number of existing particles are used to assign these to different purity classes.

Sterile rooms for the production of

sterile pharmaceu-tical products and medical devices

Cleanrooms for the cosmetics industry

Controlled areas, for example,

for car painters

Cle

anro

om c

lass

ifica

tion

14

How are you planning the conditioning of your

cleaning and disinfection textiles?

PPS® System Cycle

3. Textiles 2

. Equipment

1. Processes / Methods

4

. Che

mic

als

5. W

orkfl

ow

Custom design

your own system

Job

defi

nit

ionS

ystem so

lution

Clino CR re-usable and single-use mops and

mops for grey areas

Clino CR cloth programme:Cloths for all

cleanroom classes

Cleaning and disinfection agents aligned to the range of applications

Cost-effectiveness: significant time savings

through the use of the flat wringer or

impregnation method

Sustainability is not just lip service: Many of our mops and

microfiber cloths have been certified under the demanding

»Nordic Eco-Label«

Perfect ergonomics across the entire workflow

Qua

lifica

tion

Efficiency

Ergonomics

Cost-effectiveness

Sustainability

Compatibility / Material Compatibility

Particle emission Sterility / Autoclavibility

Cleanroom suitability / Purity suitability

Example:

Process steps >>> >>> >>>

>

>>

>

>>

There are specific requirements for

each type of product and for each area

of production, e. g.

– Removing / preventing undesirable

particles

– Deactivation of micro-organisms

– Creation of hygienic areas

– Carrying out the specifications in

the pertinent regulations

With the PPS System Cycle, we have

developed a system solution in the

form of a modular system that per-

fectly covers all requirements of the

cleaning and disinfection of your clean-

room.

We recommend the following ap-

proach:

Methods: The choice of the correct cleaning and / or disinfec-tion method is essential for the success of the craftsmanship and the product‘s profitability. Validation, reproducibility and ergonomic optimisation are essential factors.

Equipment: Whilst defined synthetics may be adequate in low cleanroom classes, where a higher level of purity is required – or in sterile areas – suitable stainless steel must be used.

Textiles: The success in cleaning and disinfecting stands and falls with the use of suitable wiping textiles. These need to be tested and certified for the use in the individual cleanroom classes.

Chemicals: The chosen equip-ment must not only be resistant to the cleaning agents and disinfectants used but also to the process media with which they potentially come into contact.

Workflow: The planning of an efficient use of the chosen cleaning system ensures profitability in its use and reliability in its results. We will gladly support you in this.

15

Ringo GMP:Maximal flexibility and efficiency

Cleaning trolley made entirely of cleanroom-suitable stainless steel; autoclavable:Maximum safety, for example for sterile environments

3. Textiles 2

. Equipment

1. Processes / Methods

4

. Che

mic

als

5. W

orkfl

ow

Custom design

your own system

EasyMop CR:Highest level of process reliability through ready-to-use impregnated mops

MopFloat:Valid impregnation of the mops

Cleaning trolley made from cleanroom- suitable stainless steel and plastic: Process reliability and efficiency in technical cleanrooms and areas with a

defined level of product safety

EasyMop GMP:Highest level of process reliability through ready-to-use, impregnated mops for areas with the most stringent (cleanliness) requirements

Qua

lifica

tion

Process reliability

Verifiability

Reproducibility

Effectivity

Conformity in design and processing

Cleanability

Example:

Process steps >>> >>> >>>

>

>>

>

>>

PP

S S

yste

m C

ycle

Accessories and components for every area of application

16

For the individual purity classes (ISO and GMP), the pertinent rules and standards prescribe certain requirements for mobile

systems. In the following, we would like to explain the most important regulations and briefly describe how they can be fulfilled.

In cleanrooms, cold and hard facts dictate

Verifiability

The effectiveness of each new technique should be validated.[EU-GMP-RL, Annex 1, Sentence 82]

Validation is the confirmation that the defined processes actually produce the required results. For this, you need a reproducible procedure, a defined

description of the procedure, as well as reports which confirm the validity of the procedure.

Design and processing / Cleanability

Surfaces and moving parts should cause

and distribute as little contamination as

is possible. They should have intact,

impermeable and clean surfaces.

They should possess qualities that limit

contamination through abrasion and

chip formation to a minimum.

[ISO 14644-5, Annex E, Sec. E.2.1]

Our cleanroom cleaning systems are developed and produced according to EHEDG (European Hygienic Engineering Design Group) recommendations. The

cleanability and processing of the stainless steel components, as well as the own particle emissions, are tested and certified.

Purity compatibility

All materials, mobile and rolling devices need to be suitable for the cleanroom-specific purity degree and, whilst in use, are not allowed to impact the product or process.[ISO 14644-5, Sentence 4.5.1]

Our most important cleanroom products have been tested in regards to their purity compatibility as defined in the regulations and have been certified as

a “TESTED DEVICE” through attests and reports conducted by the Fraunhofer Institute for production technology and automation (IPA) in Stuttgart.

Reliability / Reproducibility

The effectiveness and reproducible quality of the cleaning – even using a manual method – must be ensured.[VDI 2083 Sheet 5.1]

Through the largely operator-independent design of our systems and the protection from maloperation inherent in the sys-tem, a high level of process security is

achieved. Through this, the “people” factor can be controlled and the results can be repro-duced.

Sterility / Autoclavability

Elements, containers, equip-ment and other objects that are needed in a cleanroom area, in which aseptic work takes place, should be … sterilised.[EU-GMP-RL, Annex 1, Sentence 81]

Along with stainless steel suitable for cleanrooms, special cleanroom-suitable rolls with high moving comfort ensure that the whole cleaning and disinfection pro-

cess can be permanently autoclaved.

Impregnated mops only have to be removed from the system box

Checking the cleanability with fluorescent particles.

Product and application advice

EasyMop GMP

17

Cleanroom compatibility / Particle emissions

Containers and materials that easily lose fibres should not, as far as possible, be used in cleanrooms.[EU-GMP-RL, Annex 1, Sentence 75]

Our mops King GMP, Micro-Sicuro CR/A and the single-use mop King CR cloth mop S have been tested for their own particle emission and certified as a

“TESTED DEVICE” by the Fraunhofer Insti-tute for production technology and automation (IPA) in Stuttgart.

Efficiency

Cleaning equipment and materials need to be qualified in regard to their application location and their intended use. [VDI 2083, Sheet 5.1]

Depending on the application field, for our textiles we have test reports from Fraun-hofer IPA that confirm the cleaning effi-ciency as well as inspection reports on

the reduction of germs and the area perfor-mance for our textiles.

Compatibility / Material compatibility

Cleaning equipment and materials must … in terms of the cleaning agents used be qualified.[VDI 2083 Sheet 5.1]

Test results for material compatibility with the standard cleaning an disinfection agents exist for the system trolley com-ponents and textiles. Based on their func-

tions some components have to possess long-lasting resistance to various chemicals and were correspondingly tested by Fraunhofer IPA.

Cost-effectiveness

A production method must be as efficient as possible.[General commercial law; also applies to the manufacturing of the product cleanliness]

»Only chop as much wood as the forest can sustain! Only as much wood as can regrow!”«[The first wording of the Principle of Sustainability, by Hans Carl v. Carlowitz, 1713 in “Silvicultura oeconomica”]

Countless lab and practical studies, for example for the EasyMop GMP process, have been able to prove an increase in productivity between 18 and 22 % as

opposed to standard methods.

Sustainability

Ensuring the efficient use of resources is a challenge that goes far beyond the actual manufacturing of a system trolley and wiping textiles. In this fashion some

of our wiping textiles have been certified in accordance with the demanding “Nordic Eco- Label” for tested sustainability.

x 50

x 50

Sealed special fibres prevent the emission of particles.

In c

lean

room

s, c

old

and

hard

fac

ts d

icta

te

18

1919

Cleaning methods

Advantages and ranges of application

The selection of the correct work method for the respective

task is largely decisive for the success of the craftsmanship

and the product’s profitability. For example, the daily dis-

infection of a sterile area requires an entirely different

method than the cleaning after a maintenance phase.

For your better orientation, we have listed the most im-

portant points for the respective cleaning methods; the

detailed explanations are provided in the subsequent

chapters.

EasyMop GMP Maximum process

reliability

No open water

Certified for sterile areas

GMP A/B

Entire system can be

autoclaved

MopFloat GMP Maximum process

reliability and flexibility

Verifiable, operator-

independent impreg-

nation of the mops


autoclaved

MopFloat CR Maximum process

reliability and flexibility

Verifiable, operator-

independent impreg-

nation of the mops

Can be retrofit to all Clino

system trolleys

EasyMop CR Maximum process

reliability

No open water

Hygiene zone concept

with up to 6 colours

Ringo GMP Maximum flexibility


autoclaved

Certified for sterile areas

GMP A/B

Clino flat wringer Transmission mechanism

with defined pressure

point

Reproducible pressing

result

Easy opening of the

press through spring

mechanism

Cle

anin

g m

etho

ds

20

The EasyMop GMP and CR impreg-

nation systems offer the maximum

in safety and efficiency in cleanroom

treatment and disinfection. Independ-

ent of the operator and without the

use of any mechanical components,

the mops are always subject to

the same level of treatment, which

guarantees that the defined areas are

always properly and thoroughly dis-

infected. Comprehensive audits, cer-

tificates and seals of approval from

recognised, independent institutions

are available.

The characteristics:

Reliability:

Unintentional misuse impossible

Reproducibility

Impregnation of the textiles is

independent of operator

Verifiability: Exhaustive series

of measurements for appraisal of

the disinfection performance

Sterility: Also tested for the

GMP A/B areas

Ergonomics and learnability:

Self-explanatory, easy-to-operate

system

Avoidance of cross-contami-

nation: The entire work process

is contactless

Efficiency: Significantly less

consumption of medium through

complete use of the applied

agent is possible

Closed system with built-in safety

Impregnation EasyMop GMP® and CR

21

The impregnation is a closed system

and offers more extensive process

reliability than an open system. This

is shown through the avoidance of

incorrect operation such as re-use of a

previously contaminated mop. Due to

the system characteristics, a valid

surface moistening for an effective

disinfection and reduction of residues

is processed through the application

of the actually required amount of

fluid.

The moistening of the mops in the

system box EasyMop GMP rests on

two physical principles: Gravity and

capillary actions of the microfibers.

Through defined holding times, stor-

age times and extraction times, the

wipes are uniformly moistened due

to this interplay between gravity and

capillary action. The liquid’s uniform

distribution is supported through the

MopJump system, which, due to its

form, enables the contactless collec-

tion of the mops. The displacement

area located just beneath ensures that

even if excessive volumes of liquid are

use, the impreg nation process is not

disturbed.

Within the scope of scientific work,

the holding times, storage times and

extraction times as well as liquid vol-

ume required for a consistent result

were determined and depicted in

an operating procedure. These param-

eters ensure a reproducible and veri-

fiable wiping disinfection process.

EasyMop GMP and CR – State of the Art in cleanroom cleaning and disinfection

Design and operating sequences of the EasyMop system are scientifically researched and documented

All PPS Cleaning systems can be equiped with MopJump – the aid for a contactless collection of the mop.

Impr

egna

tion

Eas

yMop

GM

P a

nd C

R

2222

EasyMop GMP® – reliability due to GMP conformity

1 Dose the corresponding amount of solution

4 Equip system trolley with up to 4 boxes

7 Detach mop and repeat steps 5 – 7 until the system box is empty

2Load the system box with no more than 10 mops – ensure that the back of the mop (pocket) is pointed up

5 Take up the mop contactlessly with the MopJump system

8 Activate the next system box with prepared mops etc.

3 Close and turn the box

6 Clean and disinfect

9 Done

EasyMop GMP reduces the “human”

influence to a minimum and in

actual ity eliminates any unintentional

misuse. The impregnation process

occurs entirely independently of the

operator, and through the attaining

of equilib rium between gravity and

capillary force it leads to an easily

reproducible result.

23

EasyMop GMP® – the components

System box EasyMop GMP

The system box EasyMop GMP is at the centre of this

process. Aside from the special construction for the impreg-

nation, of great importance are also the ability to autoclave

of the system box and the use of material certified for use

in cleanrooms – for example, the triple seal for the secure,

leak-proof closing of the box. The MopJump located in the

system box EasyMop GMP ensures that the contactless

reception of the mop is significantly simplified.

System box EasyMop GMP and its components: A container that can also be used for transport, storage, steam sterilisation, impreg-nation and application of special mops

System box EasyMop GMP prepared for the autoclave process

Introduction to areas under sterile conditions

In order to meet the requirements listed in Appendix 1 of

the EU-GMP guidelines, which states that all equipment

required in the purity classes A/B must be introduced into

that area in a sterile manner, not only do the system trolleys

and the system boxes have to be sterile before entering the

cleanroom, but also the wiping covers required for wiping.

The special design of the closing mechanism enables the

user to autoclave the wiping covers already in the system

box EasyMop GMP.

MopFix for the stabilisation of Mopp King GMP in the impregnation of a smaller number (approx. 4 – 7) of mops

Use for small areas

In small cleanrooms without storage facilities for a system

trolley, the EasyMop GMP box can also be used as a

“stand-alone” solution. If due to small room sizes less

than 10 mops are required, then the King GMP mop can be

stabilised during the impregnation process with the MopFix

insert.

Ergonomic, easy-to-operate system

Can be autoclaved

Reliability: Also tested for GMP A/B areas

Low use of agents

Consistent impregnation of the mops

Contaminated mops cannot be re-used

Impr

egna

tion

Eas

yMop

GM

P a

nd C

R

24

EasyMop CR® – reliability due to GMP conformity and efficiency

The work steps of the EasyMop CR are

the same as for the EasyMop GMP.

The difference is the system box

ma terial used. Through the selection

of polypropylene instead of stainless

steel, the EasyMop CR is geared

1 Dose the corresponding amount of solution

4 Equip the system trolley with 2 boxes

7 Detach mop and repeat steps 5 – 7 until the system box is empty

2Load the system box with no more than 12 mops – ensure that the back of the mop (pocket) is pointed up

5 Take up the mop contactlessly with the MopJump system

8 Activate the next system box with prepared mops, etc.

3 Close and turn the box

6 Clean and disinfect

9 Done

towards cleanroom areas in which no

sterility is preconditioned. All other

advantages, such as the resistance

against misuse, the contactless work

or the reliable reproducibility of the

results, naturally remain unaffected.

The system box EasyMop CR is available in six colours for the establishment of the various hygienic concepts.

25

After the cleaning process, Clino system trolley can be easily stored

26

MopFloat GMP: The open system

with the safety of a closed system:

If you don’t intend to use a box

system, MopFloat GMP offers the

“open” alternative:


Inbuilt safety: Unintentional

misuse impossible

Reproducibility:



Verifiability: The impregnation

process automatically delivers

identical results

The dosage can be varied

between 130 ml, 250 ml or

400 ml depending on the use

(floor, wall or ceiling cleaning) or

mop type (reusable or single use)

GMP conformity: Made entirely

of stainless steel. The only pivot

point is mounted in an FDA-

conform plain bearing bush

Hygienic design:

No inaccessible or dead areas


Self-explanatory system, can be

operated with a low amount of

required physical effort

Avoidance of

cross-contamination:

The entire work process is

contactless

MopFloat can also be

used in combination

with a 25-litre plastic

bucket (MopFloat CR) pg. 47 ff

The open system with the safety of a closed system

Reproducibility: Precise amount of solution per dosing process

Work ergonomically: Easily removable and automatic return of the dosing container with the mop frame

MopFloat can be folded quickly and easily. Due to its small dimensions, it fits in almost any autoclave.

MopFloat® GMP and CR

Technical changes reserved

27

MopFloat® GMP

Even if ceilings, walls and floors do

not come into direct contact with the

product, the cleaning and disinfecting

of these surfaces is an important step

in restoring and retaining the level of

required cleanliness in the manufac-

turing areas – and therefore for retain-

ing the safety of the products. Since

the cleaning and disinfecting of large

surfaces in the cleanroom is usually

performed manually, simple and sys-

tematic work steps are required to at-

tain the desired validity of the process-

es. This means that the less likely any

potential misuse is, the more likely the

process can be implemented in a safe

and reproducible way.

“Surfaces and moving parts should

create and distribute as little con-

tamination as is possible. … They

should display characteristics that

limit the creation of contamination

through abrasion and chip forma-

tion to an absolute minimum.”

[ISO 14644-5, Appendix E, Sec. E.2.1]

This means that a cleanroom-suitable

device must have as few mechanical

components as technically possible.

MopFloat GMP achieves its function

with only one pivot point, which is ad-

ditionally mounted in an FDA-conform

plain bearing bush. The upper operat-

ing unit can be removed in a few sim-

ple steps. MopFloat fits in almost all

autoclaves. The wetting of the mop

covers with the MopFloat GMP sys-

tem is – exactly like EasyMop GMP –

based on only two physical principles:

gravity and capillary effect.

Through the elimination of the unin-

tentional misuse and the automatic,

gravity-determined sequence of the

impregnation process, each mop al-

ways and reliably has the same level

of impregnation volume – completely

independent of the operator.

Mop

Floa

t G

MP

and

CR

1Fill 25-litre stainless steel bucket with desired amount of solution and equip MopTen with mop covers

4The mop cover independently absorbs the previously adjusted volume of fluid (130, 250 or 400 ml)

2Due to the weight of the mop frame, the operating lever swings downward and after discharge it automatically returns to the initial position

5 Complete the wiping process

3 Attach mop cover while the solution amount is automatically dosed

6 Contactless mop cover discharge with MopDrop; repeat steps 2 through 6

28

The PPS flat wringer systems enable

the quick adaptation to different

requirements.

Ergonomics, efficiency and the inde-

pendently tested safety are thereby

always ensured.

When cleaning in hygienically sensi-

tive areas, the avoidance of cross-

contamination is of paramount impor-

tance. For this reason, the mop must

be changed after each wiping work

step. The flat wringer Ringo doses the

required amount of moisture for the

respective area. In combination with

the MopJump system, a contactless

and ergonomically optimised work

flow is ensured.


Flexibility: Adaptation to

different room sizes

Versatility:

Alternating between single- and

two-stage wiping technique

Tested device:

Certified through Fraunhofer IPA

Ergonomics and safety:

Contactless work with MopJump

and MopDrop

Reliability: Also tested for GMP

A/B sterile areas

Flexibility and ergonomics

Direct propulsion for ergonomic and fatigue-free operation

Contactless reception of the mop through MopJump

Contactless release of the mop through MopDrop

Flat wringer Ringo® GMP and Clino® stainless steel

29

Ringo® GMP

Upon its market introduction in 1999,

Ringo GMP was the first cleaning and

disinfection system certified for use in

sterile areas. Today it is the most

widely used system in the pharmaceu-

tical industry. Entirely manufactured

with stainless steel, it still represents

an excellent and flexible solution for all

GMP areas.

Short film: Cleanroom hygiene for professionals: Floors, ceilings, wallsTo view, scan this QR code using your smartphone or type the following link into your browser: www.pps-pfennig.de/reinraumhygiene

Flat wringer Clino® stainless steel

The Clino flat wringer’s gear mecha-

nism has a defined pressure point, i. e.

even if the operator applies additional

force no further pressure is exerted on

the mop. In this fashion, the Clino flat

wringer ensures that each mop is

removed from the wringer with the

same amount of residual moisture. At

the same time, the gear mechanism

1Place mops in the 9-litre stainless steel container and prepare cleaning and / or disinfection solution in a 25-litre bucket

4 Use the flat wringer Ringo GMP to dose the mop to the required level of moisture

2 Attach a clean mop using the mop frame

5 Begin wiping process

3 Immerse mop in 25-litre stainless steel container and tip to the front edge

6 Detach mop with MopDrop. Repeat steps 2 – 6

ensures that the required pressure can

be exerted with the least amount of

force and the wringer automatically re-

opens.

Flat

wrin

ger

Rin

go G

MP

and

Clin

o st

ainl

ess

stee

l

30

Additional cleaning and disinfection methods

The following should outline several methods that one often encounters in cleanrooms but that we believe do not

represent the most optimal solution. However, with the Clino modular system these solutions – if, for example, a transition

to a more modern method is only planned for a later date due to organisational reasons – can easily be realised and later

converted.

Dousing method• Can be used in even the smallest areas

• Mops have to be handled

• Significantly less safety than using the impregnation method

The so-called reusable mop methods, in which a previously used mop is rinsed and reused several times, will not be

alluded to any further. All of these methods contain inherent high risks of cross- and particle contamination and should not

be used in cleanrooms. The three-bucket method that is widely used in the Anglo-Saxon region will be briefly touched

upon, even though this method is also subject to the above-noted risks.

Kentucky wringer (bucket wringer)Instead of the flat wringer Ringo, a standard Kentucky wringer is used:

• Mops have to be handled

• High risk of cross-contamination

• Inefficient and non-ergonomic method

• Wringer cannot be completely cleaned

• Cannot be autoclaved

Two-stage method (bucket-sieve system) A mop is briefly pressed against the sieve, and then the floor’s surface is wetted. With a

second, dry mop, the liquid on the floor is absorbed:

• Widely used method that requires a significantly higher level of time and use of materials

• If required, bucket can be autoclaved

• Results are not easily reproducible

Three-bucket methodThe first bucket contains a disinfectant, the middle bucket contains clean water and the

waste water is located under the wringer. The mop is rinsed in the waste water and wrung

out, then immersed in the clean water and wrung out again. Finally, it is impregnated with

the fresh disinfectant.

• Low requirement of mops

• High risk of cross- and particle contamination

• Outdated method

31

Product description: pg. 20During the cleaning process, the cover of the system box can be placed sideways on the CR9 cleaning trolley

32

Hygienic zone concept

Cleaning trolley made entirely of stainless steel for GMP A and B areas

You can implement your own individual zone concept in vari-ous trolley sizes. For example, this is a medium-size trolley with EasyMop CR system boxes in red.

Cleaning trolley made of a stain-less steel / plastic combination, e. g. blue for your C areas

Example of a very small trolley. If your cleanroom is even smaller, you can also only bring one single system box into the cleanroom.

Cleaning trolley made of a stain-less steel / plastic combination, e. g. green for your D areas

You can design your individual-ised zone concept with differ-ent work methods (shown here, for example, with the flat wring-er Ringo GMP) and can differ-entiate using the colours red, blue, yellow, green or white or can select a full stainless steel design.

Cleaning trolley made of a stain-less steel / plastic combination, e. g. grey for your grey areas

We will be more than happy to help you realise your individual zone concept, even with the MopFloat work method; shown here, for example, in the full stainless steel design. Also available as a stainless steel / plastic combination in red, blue, yellow, green and white.

Example of a hygienic zone concept with the EasyMop method:

Further trolley examples: pg. 62

Through the colour-coding marking of the system boxes

and, if requested, the mops as well, operational safety is

ensured across all language barriers. The EasyMop CR

system boxes are – like most other plastic components in

the Clino modular system – available in up to six different

colours. A clear and easy-to-understand colour coding of

the different hygienic zones clearly identifies – to both inter-

nal employees as well as your customers – that different

cleanroom classes require different cleaning and hygienic

concepts. It also ensures that these concepts are also

implemented.

3333

Surface cleaning

Outside of areas under sterile condi-

tions and other highly critical areas, we

recommend surface cleaning and dis-

infection using the cloth impregnation

method. This method is significantly

more cost efficient than working with

ready-to-use products yet still offers

safety against germ- and particle

contamination. We have specifically

developed the Clino PlusBox for this

application. In the PlusBox, the impreg-

nation of reusable cloths can be safely

carried out; at the same time, the

PlusBox serves as a sealable container

that is only opened when a cloth is re-

moved. The used cloths are detached

and can be treated in a cleanroom

laundry.

1 Depending on the type of cloth, fill PlusBox with 25 – 30 cloths

4 Remove impregnated cloth and clean surface

2 Put sieve in place

5 Detach cloth and repeat steps 4 – 5

3 Pour cleaning or disinfection agent onto the cloths

The PlusBoxes can be selected in up to 6 different colours, e. g. blue indicating “fresh” and grey indicating “contaminated” cloths (see step 5)

Sur

face

cle

anin

g

3434

Clino® Connect – the clean connection

The connection between mop frame

and stick is a critical component. On

the one hand, it must have a high de-

gree of stability, but on the other hand

it must enable a quick change of differ-

ent mop frames and, in particular, be

easy to clean. Therefore, we have –

under consideration of the EHEDG

guidelines – developed an entirely new

connection system: Clino Connect.

Quick change system:

With the push of a button, the

mop frame can be changed

Easy to clean: Fully open design

Autoclavable: Manufactured

using heat-stabilised special plastic

Clino Connect Lock:

With locking device for cleaning

walls and ceilings

Clino Connect: Without locking or

blocking assistance

Clino Connect Lock: For the cleaning of walls and ceilings,

the Clino Connect Lock has a button that can lock the

swivel joint

Due to the fully open design, there are no dead areas; all of

the component’s areas are easily accessible for cleaning

All PPS mop frames can be equipped with the Clino Connect pg. 94

3535

Disposal PlusBox 6 litres

Through the detachment into

the PlusBox attached at the

side, the entire rear disposal

unit is available for the de-

tachment of the mops. For

all CR4 cleaning trolleys.

Disposal variants

Disposal Stainless steel, 4-litre container

The side detachment is also

available in stainless steel for

areas under sterile condi-

tions. For all CR4 cleaning

trolleys.

Disposal 1 x 9 litres

For the Clino CR3 FP-GMP.

pg. 54


Sack holder frame 1 x 35

litres for all CR1 and CR4

cleaning trolleys. For unster-

ile areas, also available in

transparent plastic.

pg. 65


Sack holder frame 1 x 70

litres for mop detachment

for all CR9 cleaning trolleys.

Insert 1 x 35 litres

The insert 1 x 35 litres en-

ables the separate detach-

ment of mop and cloths in

the same disposal unit.

For all CR9 cleaning trolleys.

In order to avoid recontami-

nation, it is required to de-

tach used cloths in such a

manner that they can be re-

moved from the cleanroom

without any further contact.

Depending on the trolley

model, there are different

disposal variants available

to you. The division into a

“sterile” area in front of

the system trolley’s centre

beam and an “unsterile”

area behind it increases the

operator safety. pg. 71

Dis

posa

l var

iant

s

36

Contactless working with MopDrop®

The MopDrop enables the contactless

opening of the mop frame. It is lo-

cated directly above the release sack

so that the used wiping cover falls

directly into it without any further

contact. Contamination through used

wiping covers is therefore eliminated.

The positioning of the MopDrop be-

hind the push handle provides a clear

separation of the trolley areas into a

clean area (in front of the handle) and

an unclean area (behind the handle).

MopDrop is compatible with all Clino mop frames, e. g. wire mop frame …

… or Clino Ergo EM mop frame … or … pg. 94

Can be retrofitted to all Clino system trolleys with a disposal unit

1 Opening the mop frame with MopDrop by moving it against the inclined plane 2 Attachment of the mop and cleaning 3

Contactless release of the contaminated mop. Suitable for all system trolleys that include an attachment for a disposal sack. pg. 35

37

Sterile disposal bags

Our cleanroom disposal

bags are made of special

transparent LDPE with

strength of 75 µ. They are

individually cut, folded and

double-packaged in blocks

of 10 in the cleanroom. They

are available as a precise fit

for the 70-litre and 35-litre

disposal units as well as an

insert in the 9-litre bucket or

the EasyMop GMP and CR

system boxes. All sizes are

also available in sterilised

form with batch documen-

tation and gamma ray indi-

cator.

pg. 72

Designed for cleanroom use

6- and 9-litre disposal bags

Can be used with all 4-litre

stainless steel containers

and PlusBoxes.

Delivery time:

approx. 6 weeks

pg. 35

35-litre disposal bag

Can be used with all small

(CR1) and medium-sized

(CR4) cleaning trolleys with

disposal.

Sterile disposal bag

Double-packaged with LOT

number and gamma ray indi-

cator.

70-litre disposal bag

Can be used with all large

(CR9) PPS cleaning trolleys

with disposal.

Ste

rile

disp

osal

bag

s

3838

Cleanroom-compliant trolley design

ClinoLink: pg. 69Connection system consisting of a total of eight multi-functional retainers for the object-specific adjustment of the CR4 system trolley. All accessory parts can easily be removed for cleaning

Welding technology:The stainless steel pipes are connected in a smooth and form-fitted manner

Enclosed design:The system trolley does not have any open areas. Intake for other attachments are designed as blind-hole bushings, i. e. they are closed from the inside

Special castors:The swivel castors are available as an autoclavable (up to 134 °C) or electrically conductive design. If required, the castors can be equipped with locking devices

Modular design:For most models, the cleaning method can easily be ex-changed. Almost all trolley sizes can be equipped with impregnation, MopFloat or flat wringer

The system trolley of the

Clino CR series has particu-

larly been developed for the

use in the cleanroom. Using

the example of the Clino

CR4 model, we would like

to highlight some of the dif-

ferences to the “standard”

cleaning trolleys.

Hygienic design:All of the Clino CR system trolley assembly groups have been designed so that they are easy to clean

1 5

26

37

8

4

3939

The Clino® CR model series

Cleaning trolley for impregnation

EasyMop GMP and CR

Enclosed system with inherent

system safety

pg. 40 et seq.

Cleaning trolley with MopFloat

MopFloat GMP and CR

The open system with the safety

of an enclosed system

pg. 46 et seq.

Cleaning trolley with flat wringer

Flexibility and ergonomics

pg. 50 et seq.

Cleaning trolley for grey areas

Professional solutions for

controlled areas

pg. 56 et seq.

Stainless steel design Stainless steel-plastic design



The

Clin

o C

R m

odel

ser

ies

40

The system trolley for use in areas

with stringent requirements such as

areas under sterile conditions (GMP

A/B) or ISO areas with high clean-

liness requirements. Design, materials

and processing meet the highest

demands and are tested and certified

by independent institutes.


Validatable process with

maximum process reliability

(as per EU-GMP-RL Annex 1,

Sentence 82)

Reproducible results due to

system-specific elimination of

sources of errors

Autoclavable*, suitable for the

use in areas under sterile condi-

tions (as per ISO 14644-5, Sec.

E.2.2. and EU-GMP-RL, Annex 1,

Sentence 81) * Does not apply to the EasyMop CR

system box

Entirely enclosed and smooth

finishing (as per ISO 14644.5,

Annex E, Sec. E.2.1)

System box EasyMop GMP and

Clino CR9 have the TESTED

DEVICE certificate of Fraunhofer

IPA

The Clino modular design

enables object-specific

adjustments

A practically contactless

workflow with MopJump and

MopDrop

Self-explanatory work steps,

therefore easy-to-learn

Work procedure, see page 20 et seq.

Process reliability with the EasyMop GMP and EasyMop CR system

Manufactured from stainless steel 316L in accordance with the guidelines of EHEDG

Available with swivel castors suitable for the cleanroom; if required, the castors can be autoclaved or electrically conductive, with or with out locking device

Hygienic design:Entirely enclosed finishing. Enclosed attachment point designed as blind-hole bushings

Clino® CR trolley systemswith impregnation ofEasyMop GMP® and CR

41

Clino® CR mini EM-GMP1Impregnation system for 10 mops, for highly sensitive areas – minimal space requirements, including disposalArt. No.: 3510170Dimensions (LxWxH): 43 x 53 x 43 cm

Basic components Base frame mini Stainless steel suitable for cleanrooms, high-end finish

Special ca stors (100 mm) can be autoclaved

Work area 1 system box EasyMop GMP 1 9-litre stainless steel container for mop release

Method of operation Impregnation with the system box EasyMop GMP

Clino® CR mini EM-GMP2Impregnation system for 20 mops, for highly sensitive areas – minimal space requirementsArt. No.: 3510160Dimensions (LxWxH): 43 x 53 x 43 cm


Special ca stors (100 mm) can be autoclaved

Work area 2 system boxes EasyMop GMP


Clino® CR1 EM-GMPImpregnation system for highly sensitive areas – with disposal unitArt. No.: 3510100Dimensions (LxWxH): 61 x 53 x 70 cm

Basic components Small base frame Stainless steel suitable for cleanrooms, high-end finish

Special castors (100 mm) can be autoclaved

Work area 2 system boxes EasyMop GMP


Disposal 1 x 35-litre unit 1 9-litre stainless steel container

ISO 3 4 5 6 7 8 9GMP A/B C D

Additional attachment of stainless steel container MopTenfor mop release possible – Art. No.: 3510185

Picture shows model, including optional extras


Ergonomics: The small, compact CR mini cleaning unit was constructed in such a manner that it can be moved with the mop frame. No bending down is required.

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

Clin

o C

R t

rolle

y sy

stem

s w

ith im

preg

natio

n of

Eas

yMop

GM

P a

nd C

R

m²0,2

m²0,2

m²0,3

4242

Cleaning trolley with impregnation

Clino® CR4 EM-GMPThe high-end system trolley:The modular design system suitable for the cleanroom; for use in highly sensitive areas

Cleaning method: EasyMop GMP with a system box certified for areas under sterile conditions

Highest efficiency and process reliability in the single-step process

Made from stainless steel suitable for cleanrooms, all components can be autoclaved

Individually configurable through Clino modular design system

ClinoLink: Cleanroom-suitable connection system for individual attachment of accessory parts (see assembly variant for an example)

pg. 69

Clino® CR4 EM-GMPArt. No.: 3540500

Dimensions (LxWxH): 61 x 63 x 102 cmVariable width, depending on assembly variant

Optional extras / accessories

ClinoLinkAssembly variant 2: Contains 3 trays for various mopsArt. No.: 3500088

pp. 62, 69, 101

MopDropContactless release of the mop with MopDropArt. No.: 3500019

pg. 36

ClinoLinkAssembly variant 4: Additional attachment of a 9-litre stainless steel container (only possible for EasyMop method)Art. No.: 3530189

Clino stainless steel mop frame with one-piece handleArt. No.: 3500902Additional mop frames

pg. 94

ClinoLinkAssembly variant 3: Additional attachment of a 4-litre stainless steel container, e. g. for cloth releaseArt. No.: 3500094

Disposal bag 1 x 35-litre, sterile, me-dium-sized, transparentArt. No.: 3580016

pp. 37, 72

ClinoLink assembly variant 1: With mop handle holder and support for the mop frame. Picture shows model, including optional extras

Standard equipment Clino CR4 EM-GMP Art. No.: 3540500

Basic components Work area Supply unit Disposal• Medium base frame• Stainless steel suitable

for cleanrooms, high-end finish

• Tube size 22 mm

• Special castors (100 mm) can be autoclaved

• 2 system boxes EasyMop GMP

• 2 4-litre stainless steel containers

See ClinoLink Assembly variants 2, 3 and 4

• 1 x 35-litre unit• 9-litre stainless

steel container

ISO 3 4 5 6 7 8 9GMP A/B C D

m²0,4

4343


Clino® CR9 EM-GMPThe high-end solution for very large cleanrooms

Cleaning method: EasyMop GMP with a system box certified for areas under sterile conditions



Can be equipped for an up to 600 m2 floor cleaning area

Including 4-litre stainless steel container, swivel-mounted, for surface cleaning

Clino® CR9 EM-GMPArt. No.: 3570050

Dimensions (LxWxH): 83 x 53 x 98 cm


Space-saving solution after the cleaning procedure: the CR9 system trolleys can be telescoped

They are optionally avail-able with either autoclav-able or electrically conduc-tive special castors with or without locking devices

pg. 70

Stainless steel Trapez mop frame for surface cleaning and disinfection, e. g. of WSP benchesArt. No.: 2009580

pp. 95, 99


Standard equipment Clino CR9 EM-GMP Art. No.: 3570050

Basic components Work area Disposal• Large base frame• Stainless steel suitable for

cleanrooms, high-end finish

• Tube size 22 mm


• 4 system boxes EasyMop GMP• 2 4-litre stainless steel

containers

• 1 x 70-litre unit


pg. 94


pg. 36

Disposal bag 1 x 70-litre sterile, large, transparentArt. No.: 3580017

pp. 37, 72

ISO 3 4 5 6 7 8 9GMP A/B C D

Clin

o C

R t

rolle

y sy

stem

s w

ith im

preg

natio

n of

Eas

yMop

GM

P a

nd C

R

m²0,5

44

Clino® CR mini EM-CR2Impregnation system for 24 mops for use in non-sterile areas, minimal space requirements, with disposalArt. No.: 3510140Dimensions (LxWxH): 57 x 53 x 45 cm

Clino® CR mini EM-CR1Impregnation system for 12 mops for use in non-sterile areas, minimal space requirementsArt. No.: 3510150Dimensions (LxWxH): 43 x 52 x 45 cm

Clino® CR1 EM-CRThe EasyMop CR system can be stored underneath the workbenchArt. No.: 3510200Dimensions (LxWxH): 61 x 53 x 70 cm


Electrically conductive special castors (100 mm)





Work area 2 system boxes EasyMop 1 tray for system boxes EasyMop System box is available in the following colours:

pg. 63

Disposal 1 stainless steel container MopTen Cleanroom-suitable 9-litre disposal bag available for delivery as an accessory pp. 37, 72

Work area 1 system box EasyMop 1 tray for system boxes EasyMop System box is available in the following colours:

pg. 63

Disposal 1 system box EasyMop Cleanroom-suitable 9-litre disposal bag available for delivery as an accessory pp. 37, 72

Work area 2 system boxes EasyMop 1 tray for system boxes EasyMop System box is available in the following colours:

pg. 63

Disposal 1 x 35-litre unit 1 9-litre stainless steel container Cleanroom-suitable 35-litre disposal bag available for delivery as an accessory pp. 37, 72


ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D




m²0,2

m²0,3

m²0,3

4545

Clino® CR4 EM-CRThe high-end system trolley:The cleanroom-suitable modular design system for highly sensitive areas that do not require sterility

Cleaning method: EasyMop CR with ergonomically optimised system box


Wiper impregnation for surface cleaning in the PlusBox

Made of cleanroom-suitable stainless steel, base frame and electrically conductive castors



pg. 69

Clino® CR4 EM-CRArt. No.: 3540600



Standard equipment Clino CR4 EM-CR Art. No.: 3540600

Basic components Work area Supply unit Disposal• Medium base frame• Stainless steel suitable for

cleanrooms, high-end finish• Electrically conductive special

castors (100 mm)

• 2 system boxes EasyMop CR• 2 PlusBoxes• 1 tray for system boxes EasyMop

See ClinoLink assembly variants 2, 3 and 4

• 1 x 35-litre unit• 5-litre plastic container



ClinoLinkAssembly variant 2: Contains 3 trays for various mopsArt. No.: 3500088

pp. 62, 69, 101

ClinoLinkAssembly variant 4: Additional attachment of a 5-litre plastic container (only possible for Easy-Mop method)Art. No.: 3530188

pg. 69

ClinoLinkAssembly variant 3: Additional attachment of a Clino PlusBox, e. g. for cloth release Art. No.: 3500095


pg. 36


pp. 37, 72

Are available with either autoclavable or electrically conductive special castors

pg. 70

ISO 3 4 5 6 7 8 9GMP A/B C D

Clin

o C

R t

rolle

y sy

stem

s w

ith im

preg

natio

n of

Eas

yMop

GM

P a

nd C

R

m²0,4

46

In case you don’t intend to use a box

system, MopFloat GMP offers the

“open” alternative: Through the use of

mechanical intelligence, it is ensured

that – independent of the user – the

same reliable result is always attained

in the mop impregnation process.

From the beginning, MopFloat GMP

offers maximum safety while provid-

ing full flexibility for the requirements

of highly critical areas under consid-

eration of the pertinent regulations

and guidelines.


Validatable process with

maximum process reliability

(as per EU-GMP-RL Annex 1,

Sentence 82)

Inbuilt safety:

Unintentional misuse impossible

Reproducibility:



Autoclavable: suitable for

the use in areas under sterile

conditions (as per ISO 14644-5,

Sec. E.2.2. and EU-GMP-RL,

Annex 1, Sentence 81)

GMP conformity: Manufactured

entirely from stainless steel;

the only swivel is located in an

FDA-conform plain bearing bush

Hygienic design: No hard-to-

reach places or dead areas;

MopFloat can be folded


Self-explanatory system, can be

operated with a low amount of

required physical effort

Avoidance of

cross-contamination:

The entire work procedure is

practically contactless through

MopJump and MopDrop

Work procedure, see page 26

MopFloat GMP: The open system with the safety of an enclosed system

Clino® CR trolley systems with MopFloat® GMP and CR

Manufactured from stainless steel 1.4404 in accordance with the guidelines of EHEDG

Available with swivel castors suitable for the cleanroom; if required, the castors can be autoclaved or electrically conductive, with or with out locking device

Reproducibility: Precise amount of solution per dosing process

Technical changes reserved

47

Clino® CR mini MF-GMPFor highly sensitive areas; minimal space requirementsArt. No.: 3510180Dimensions (LxWxH): 57 x 56 x 49 cm

Clino® CR1 MF-GMPFor highly sensitive areas; low space requirements, includes disposalArt. No.: 3510050Dimensions (LxWxH): 74 x 57 x 71 cm

Clino® CR5 MF-GMPThe system trolley with maximum transport capacity – add-on parts in the front and back for storage can be folded in Art. No.: 3570020Rest dimensions (LxWxH): 85 x 52 x 130 cmWorking dimensions (LxWxH): 146 x 52 x 101 cm





Basic components Large base frame Stainless steel Special castors (100 mm) can be autoclaved

Work area MopFloat GMP 25-litre stainless steel container

Supply unit stainless steel container MopTen

Work area MopFloat GMP 25-litre stainless steel container stainless steel container MopTen

Disposal 1 x 35-litre unit 9-litre stainless steel container

Work area MopFloat GMP 25-litre stainless steel container stainless steel container MopTen

Supply unit 3 stainless steel trays 3 4-litre stainless steel containers

Disposal 2 x 70-litre unit

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D



Clin

o C

R t

rolle

y sy

stem

s w

ith M

opFl

oat

GM

P a

nd C

R

m²0,3

m²0,4

m²0,8

m²0,4

Also available as a stainless steel / plastic versionClino® CR mini MF-CRArt. No.: 3510190

Also available as a stainless steel / plastic versionClino® CR1 MF-CRArt. No.: 3510060

ISO 3 4 5 6 7 8 9GMP A/B C D

4848

Clino® CR4 MF-GMPThe high-end system trolley:The modular design system suitable for the cleanroom; for use in highly sensitive areas

Cleaning method: Results can be validated through the innovative MopFloat method





pg. 69

Clino® CR4 MF-GMPArt. No.: 3540300



Standard equipment Clino CR4 MF-GMP Art. No.: 3540300

Basic components Work area Supply unit Disposal• Base frame• Stainless steel suitable for

cleanrooms, high-end finish• Special castors (100 mm)

can be autoclaved

• MopFloat GMP• 1 25-litre stainless steel

container for the cleaning and disinfection fleet

• 1 stainless steel container MopTen for fresh mops

See ClinoLink assembly variants 2 and 3


steel container



ClinoLink Assembly variant 2: Contains 3 trays for various mop framesArt. No.: 3500088

pp. 62, 69, 101

ClinoLink Assembly variant 3: Additional attachment of a 4-litre stainless steel con-tainer, e. g., for disposal of decontaminated wipers Art. No.: 3500094

Autoclavable special castorswith and without locking deviceArt. No.: 3500100 (without)Art. No.: 3500150 (with)

S. 70


pg. 36


pp. 37, 72

MopJumpContactless and easy mop attachmentArt. No.: 3500020

pg. 66

ISO 3 4 5 6 7 8 9GMP A/B C D

m²0,5

4949

Clino® CR4 MF-CRThe high-end system trolley:The cleanroom-suitable modular design system for highly sensitive areas that do not require sterility

Cleaning method: Results can be validated through the innovative MopFloat method


Made from cleanroom-suitable stainless steel, base frame and electrically conductive castors



pg. 69

Clino® CR4 MF-CRArt. No.: 3540400



Standard equipment Clino CR4 MF-CR Art. No.: 3540400

Basic components Work area Supply unit Disposal• Base frame• Stainless steel suitable

for cleanrooms, high-end finish

• Tube size 22 mm

• Special castors (100 mm), electrically conductive

• MopFloat CR• 1 25-litre bucket• 1 15-litre bucket• 2 PlusBoxes


• 1 x 35-litre unit• 5-litre plastic

container



pp. 62, 69, 101


pg. 66

ClinoLink Assembly variant 3: Additional attachment of a PlusBox, e. g. for wiper releaseArt. No.: 3500095


pp. 37, 72


pg. 36

Trapez mop frame for surface cleaningArt. No.: 2520300

pp. 95, 99

ISO 3 4 5 6 7 8 9GMP A/B C D

Clin

o C

R t

rolle

y sy

stem

s w

ith M

opFl

oat

GM

P a

nd C

R

m²0,5

50

The Clino CR3 system trolley with the

flat wringer Ringo GMP was certified

by Fraunhofer IPA in 1999. It was the

first ever cleaning and disinfection

system certified for cleanrooms. Its

open design enables the use of single

or two-step cleaning techniques and

therefore makes it an ideal tool for

primary or intermediate cleaning.

However, the design, selection of

materials and processing reflect the

highest requirements, so that the use

even in areas under sterile conditions

(GMP A/B) is not a problem.

* Does not apply to Clino CR6


Open design for the use of

various cleaning methods

Full flexibility with changing

requirements

Security through independent

assessment (Clino CR3)

Autoclavable*, suitable for the

use in areas under sterile condi-

tions (as per ISO 14644-5, Sec.

E.2.2. and EU-GMP-RL, Annex 1,

Sentence 81)

* Does not apply to Clino CR6

The Clino modular design

enables object-specific

adjustments

A practically contactless

workflow with MopJump and

MopDrop

Work procedure, see page 29

Full flexibility with Clino CR – the first certified cleaning system for cleanroom use

Clino® CR trolley systems with flat wringer Ringo® GMP

All trolleys shown here are also available with the stainless steel Clino flat wringer

pg. 28

Available with swivel castors suitable for the cleanroom; if required, the castors can be autoclaved or electrically conductive, with or with out locking device

Manufactured from stainless steel 316L in accordance with the guidelines of EHEDG

51

Clino® CR1 FP-GMPFor highly sensitive areas, minimal space requirements, with disposalArt. No.: 3511000Dimensions (LxWxH): 74 x 53 x 70 cm

Work area Flat wringer Ringo GMP 25-litre stainless steel container stainless steel container MopTen

Disposal 1 x 35-litre unit 9-litre stainless steel container


Stainless steel mop frame (see pg. 94)

MopJump (see pg. 66) MopDrop (see pg. 36)

Electrically conductive castors (see pg. 70)

1 x 35-litre sterile disposal bag (see pp. 37, 72)

The most-liked accessories for the Clino CR1 FP-GMP

Basic components Small base frame, high-end finish


Clino® CR5 FP-GMPThe system trolley with maximum transport capacity – add-on parts in the front and back for storage can be folded inArt. No.: 3570000Rest dimensions (LxWxH): 85 x 52 x 130 cmWorking dimensions (LxWxH): 146 x 52 x 101 cm


Supply unit 3 stainless steel trays 3 4-litre stainless steel containers


Stainless steel mop frame (see pg. 94)

MopJump (see pg. 66) Electrically conductive castors (see pg. 70)

1x 70-litre sterile disposal bag (see pp. 37, 72)

Trapez stainless steel mop frame (see pp. 95, 99)

The most-liked accessories for the Clino CR5 FP-GMP

Basic components Large base frame Stainless steel Special castors (100 mm) can be autoclaved

Work area Flat wringer Ringo GMP 25-litre stainless steel container stainless steel container MopTen

ISO 3 4 5 6 7 8 9GMP A/B C D

Clin

o C

R t

rolle

y sy

stem

s w

ith fl

at w

ringe

r R

ingo

GM

P a

nd C

lino

stai

nles

s st

eel

m²0,4

m²0,8

m²0,4

Also available as a stainless steel / plastic versionClino® CR1 FP-CRArt. No.: 3511500

ISO 3 4 5 6 7 8 9GMP A/B C D

5252

Clino® CR4 FP-GMPThe high-end system trolley: The modular design system suitable for the cleanroom; for use in highly sensitive areas

Cleaning method: certified flat wringer Ringo GMP for areas under sterile conditions

Full flexibility in single- and two-step technique




pg. 69

Clino® CR4 FP-GMPArt. No.: 3540100



Standard equipment Clino CR4 FP-GMP Art. No.: 3540100

Basic components Work area Supply unit Disposal• Base frame• Stainless steel suit-

able for cleanrooms, high-end finish

• Tube size 22 mm


• Flat wringer Ringo GMP

• 1 25-litre stainless steel container for the cleaning and disinfection fleet

• stainless steel container MopTen for fresh mops



steel container




pp. 62, 69, 101

ClinoLink Assembly variant 3: Additional attachment of a 4-litre stainless steel container, e. g. for wiper releaseArt. No.: 3500094

pg. 69


pg. 70


pg. 36


pp. 37, 72

Trapez mop frame stainless steel for surface cleaning and disinfectionArt. No.: 2009580

pp. 95, 99

ISO 3 4 5 6 7 8 9GMP A/B C D

m²0,5

5353

Clino® CR4 FP-CRThe high-end system trolley:The cleanroom-suitable modular design system for highly sensitive areas without sterility requirements

Cleaning method: Flat wringer Ringo GMP


Wiper impregnation for surface cleaning in the PlusBox

Made of cleanroom-suitable stainless steel, base frame and electrically conductive swivel castors



pg. 69

Clino® CR4 FP-CRArt. No.: 3540200



Standard equipment Clino CR4 FP-CR Art. No.: 3540200

Basic components Work area Supply unit Disposal• Base frame• Stainless steel suit-

able for cleanrooms, high-end finish

• Tube size 22 mm

• Electrically conductive special castors (100 mm)

• Flat wringer Ringo GMP

• 2 PlusBoxes• 1 25-litre bucket

• 1 15-litre bucket for fresh mops


• 1 x 35-litre unit• 5-litre plastic

container



pp. 62, 69, 101

ClinoLink Assembly variant 3: Additional attachment of a PlusBox, e. g. for wiper releaseArt. No.: 3500095

All Clino PlusBoxes can be equipped with the 4- to 6-litre mini disposal bag

pp. 37, 72


pp. 37, 72


pg. 70

ISO 3 4 5 6 7 8 9GMP A/B C D

Trapez mop frame for surface cleaningArt. No.: 2520300

pp. 95, 99

Clin

o C

R t

rolle

y sy

stem

s w

ith fl

at w

ringe

r R

ingo

GM

P a

nd C

lino

stai

nles

s st

eel

m²0,5

5454


Clino® CR3 FP-GMPThe tried-and-tested all-round solution

Cleaning method: Flat wringer Ringo GMP


Certified for sterile areas GMP A/B Made from stainless steel suitable for cleanrooms, all components can be autoclaved

Clino® CR3 FP-GMPArt. No.: 3530010

Dimensions (LxWxH): 86 x 53 x 109 cm


Standard equipment Clino CR3 FP-GMP Art. No.: 3530010

Basic components Work area Supply unit Disposal• Large base frame• Stainless steel suitable for

cleanrooms, high-end finish• Special castors (100 mm)

can be autoclaved

• Flat wringer Ringo GMP• 2 25-litre stainless steel

containers

• 9-litre stainless steel container, top for fresh mops

• 9-litre stainless steel container, bottom for contaminated mops



pg. 66

All mop frames are avail able with the Clino Connect replacement mount for fast and easy handle replacement pp. 34, 94

Disposal bag 1 x 9-litre, sterile, small, transparentArt. No.: 3580015

pp. 37, 72

The mop frame’s handle can be affixed to the permanently attached carrier


pg. 94

Optionally available with either autoclavable or electrically conductive special castors with or without locking devices

pg. 70

ISO 3 4 5 6 7 8 9GMP A/B C D

m²0,5

55

Clino® CR6 FP3-bucket system with four buckets for surface cleaning and supply articlesArt. No.: 3550100Dimensions (LxWxH): 80 x 54 x 102 cm

Clino® CR6s FP2-bucket system trolley with additional storage space on topArt. No.: 3550200Dimensions (LxWxH): 67 x 54 x 102 cm

Clino® CR6xs FPDouble rolling bucket system with minimal space requirementsArt. No.: 3550300Dimensions (LxWxH): 51 x 54 x 101 cm

Basic components Large base frame Stainless steel Tube size 22 mm Special castors (100 mm) can be autoclaved

Basic components Medium base frame Stainless steel Tube size 22 mm Special castors (100 mm) can be autoclaved

Basic components Medium base frame Stainless steel Tube size 22 mm Special castors (100 mm) can be autoclaved

Work area Flat wringer Clino stainless steel with defined pressure point for uniform residual moisture

3 15-litre buckets with straight stainless steel handle

Supply unit 4 6-litre buckets with straight stainless steel handle



Supply unit 4 6-litre buckets with straight stainless steel handle



ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

Clin

o C

R t

rolle

y sy

stem

s w

ith fl

at w

ringe

r R

ingo

GM

P a

nd C

lino

stai

nles

s st

eel

m²0,4

m²0,4

m²0,3

56

In controlled and grey areas there are

no regulated requirements such as in

the classified cleanrooms, but, even

so, all types of contamination must be

avoided or removed from the area.

Therefore, the Clino system trolleys

for controlled areas make professional

cleaning technology available, how-

ever without leading to unnecessary

costs. On the contrary – through their

origin in professional building cleaning,

they are consistently designed to

efficient work procedures and, as a

result, save both time and money.

The possible cleaning methods are the

same as for the cleanroom system

trolleys – only implemented as a

lower-priced solution.


Stainless steel modular design

system for the object-specific

adjustment

All cleaning methods

are available

Almost any type of special

construction is possible

Changing the cleaning system

without using any tools can be

completed quickly

MultiBox drawer system

for maximal storage space and

enclosed appearance

Hygienic zone concept

attainable by using five colours

of plastic components

The Clino stainless steel modular design system: Professional solutions for controlled areas

Clino® Trolley systems for grey areas

Plug-in connections, no screws required

Double-bearing mounted 125 mm swivel castors with panel

22 mm stainless steel tube

57

Clino® STEC20The compact system trolley for sensitive areasArt. No.: 3202000Dimensions (LxWxH): 68 x 62 x 115 cm

Clino® STEC20 with disposal unitThe compact system trolley for sensitive areas with removable disposal unitArt. No.: 3205000Dimensions (LxWxH): 117 x 62 x 115 cm

Basic components Medium base frame Stainless steel Double-bearing mounted 125 mm swivel castors


Work area 1 MultiBox with 4 PlusBoxes for impregnation of mops and cloths

ClinoBar bottle holder

Supply unit 1 MultiBox

Disposal 1 MultiBox

Work area 1 MultiBox with 4 PlusBoxes for impregnation of mops and cloths

ClinoBar bottle holder

Supply unit 2 MultiBoxes

Disposal 1 removable unit

Clino® E1eThe smallest possible cleaning trolley with stainless steel flat wringerArt. No.: 2020400Dimensions (LxWxH): 62 x 57 x 86 cm

Basic components Small base frame Stainless steel Double-bearing mounted 125 mm swivel castors

Work area Flat wringer Clino stainless steel 1 25-litre bucket 1 15-litre bucket

The STEC20 is also avail able with the system box EasyMop and in different colours.Art. No. of this version: 3204000

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D


Picture shows model, including optional extras Trol

ley

syst

ems

for

grey

are

as

m²0,4

m²0,7

m²0,3

58

Trolley systems for grey areas

Clino® Profi C5eThe medium-sized cleaning trolley with stainless steel flat wringer and three buckets for surface cleaningArt. No.: 2095520Rest dimensions (LxWxH): 78 x 58 x 110 cmWorking dimensions (LxWxH): 100 x 58 x 110 cm


Work area Flat wringer Clino stainless steel 1 25-litre bucket 1 15-litre bucket 3 6-litre bucket


Clino® E1 MFThe smallest possible cleaning trolley with the innovative MopFloat systemArt. No.: 2020900Dimensions (LxWxH): 62 x 57 x 86 cm

Basic components Small base frame Stainless steel Double-bearing mounted 75 mm swivel castors

Work area MopFloat CR 1 25-litre bucket 1 15-litre bucket

Clino® Profi C5 MFThe medium-sized cleaning trolley with the innovative MopFloat systemArt. No.: 2095900Rest dimensions (LxWxH): 78 x 59 x 110 cmWorking dimensions (LxWxH): 100 x 59 x 110 cm


Work area MopFloat CR 1 25-litre bucket 1 15-litre bucket 3 6-litre bucket


ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

m²0,3

m²0,6

m²0,6

m²0,4

m²0,4

59

Clino® Profi C7eThe large cleaning trolley with stainless steel flat wringerArt. No.: 2097575Rest dimensions (LxWxH): 90 x 57 x 133 cmWorking dimensions (LxWxH): 131 x 57 x 107 cm

Basic components Large base frame Stainless steel Tube size 22 mm Double-bearing mounted 125 mm swivel castors

Work area Flat wringer Clino stainless steel 1 25-litre bucket 1 15-litre bucket

Supply unit 3 trays 3 6-litre buckets


Clino® Profi C9The large stainless steel system trolley for the EasyMop processArt. No.: 2099980Rest dimensions (LxWxH): 90 x 57 x 133 cmWorking dimensions (LxWxH): 119 x 57 x 107 cm


Work area 1 tray for system boxes EasyMop 2 system boxes EasyMop



Clino® Profi C7 MFThe large cleaning trolley with the innovative MopFloat systemArt. No.: 2097900Rest dimensions (LxWxH): 90 x 58 x 133 cmWorking dimensions (LxWxH): 131 x 58 x 107 cm


Work area MopFloat CR 1 25-litre bucket 1 15-litre bucket



ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D


Picture shows model, including optional extras Trol

ley

syst

ems

for

grey

are

as

m²0,7

m²0,8

m²0,8

m²0,5

m²0,5

m²0,5

60

Clino® STEC7 MFThe ergonomically optimised system trolley for controlled areas.Enclosed appearance, open function with the Clino MultiBoxArt. No.: 3077470Rest dimensions (LxWxH): 107 x 61 x 115 cmWorking dimensions (LxWxH): 155 x 61 x 115 cm


Work area MopFloat CR 1 25-litre bucket, 1 15-litre bucket ClinoBar bottle holder

Supply unit 3 MultiBoxes 4 PlusBoxes


Trolley systems for grey areas

Clino® STEC9KThe ergonomically optimised system trolley for controlled areas.Enclosed appearance, open function with the Clino MultiBoxArt. No.: 3079740Rest dimensions (LxWxH): 98 x 61 x 115 cmWorking dimensions (LxWxH): 142 x 61 x 115 cm


Work area 1 tray for system boxes EasyMop 3 system boxes EasyMop ClinoBar bottle holder

Supply unit 3 MultiBoxes 4 PlusBoxes for cloth impregnation


Clino® STEC7The ergonomically optimised system trolley for controlled areas. Enclosed appearance, open function with the Clino MultiBoxArt. No.: 3077670Rest dimensions (LxWxH): 107 x 61 x 115 cmWorking dimensions (LxWxH): 155 x 61 x 115 cm


Work area Flat wringer Ringo 1 25-litre bucket, 1 15-litre bucket ClinoBar bottle holder

Supply unit 3 MultiBoxes 4 PlusBoxes


ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D




m²1

m²1

m²0,9

m²0,6

m²0,6

m²0,6

61

All PPS system trolleys for cleanrooms are also ideally suited for wall and ceiling cleaning

62

PPS® components for cleanroom system trolleys

Due to its standardised dimensions, the Clino modular design system enables the trouble-free exchange of individual

components. Using the example of the CR4 model, here we’ll show you a selection of possible variants that are all based

on identical base frames:

The components and colours can be freely combined. Let us help you design your own system trolley design concept.

Clino CR4 FP with accessories (assembly variants 1 and 3) pg. 53

Clino CR4 FP-GMP with accessories (assembly variants 1 and 2) pg. 52

Clino CR4 MF-GMP with accessories (assembly variants 1 and 3) pg. 48

Clino CR4 EM-GMP with accessories (assembly variants 1, 2 and 4) pg. 42

Clino CR4 EM-CR with accessories (assembly variants 1 and 2) pg. 45 Zone concept blue

Clino CR4 EM-CR with accessories (assembly variants 1 and 3) pg. 32 Zone concept grey / charcoal-grey

Clino CR4 EM-CR with accessories (assembly variants 1 and 3) pg. 32 Zone concept yellow

Clino CR4 EM-CR with accessories (assembly variant 1) pg. 32 Zone concept green

Clino CR4 EM-CR with accessories (assembly variants 1 and 3) pg. 32 Zone concept red

63

Work areaArticle No. Description Colour Suitable for system trolley

PP

S c

ompo

nent

s fo

r cl

eanr

oom

sys

tem

tro

lleys

System box EasyMop GMPCertified for sterile areas GMP A/B. Can be validated and autoclaved, safe to use. With scaling 1, 2, 2,5 and 4 litres3500200 System box EasyMop GMP with lid Stainless steel3500210 MopJump for System box EasyMop GMP and MopTen3500220 Triple seal

System box EasyMop CRThe solution for impregnation in cleanrooms without sterility require-ments. Different colours, e. g. for designing your own individual zone concept pp. 32, 622910000 System box EasyMop CR with lid and seal 2910001 Lid 2910003 Seal







pp. 20, 40


pp. 20, 40 et seq.


pp. 20, 40 et seq.


pp. 20, 40 et seq.


pp. 20, 40 et seq.


pp. 20, 40 et seq.


pp. 20, 40 et seq.

64


Article No. Description Colour Suitable for system trolley

Work area

MopFixStabilisation assistance during impregnation of a small number of King GMP mops (approx. 4 – 7)3500215 MopFix

Tray for system box EasyMop CRCarries two system boxes EasyMop in work or impregnation position 2920001 Tray for system box EasyMop 2920006 Tray for system box EasyMop

Flat wringer Ringo GMPManufactured from high-grade stainless steel; certified for use in areas under sterile conditions GMP A/B With direct drive3560000 Flat wringer Ringo GMP Stainless steel

Flat wringer Clino stainless steelManufactured from high-grade stainless steel; with transmission mechanism for an always consistent level of moisture in the mop1900002 Flat wringer Clino stainless steel Stainless steel

MopFloat GMPThe innovative, validatable stainless steel impregnation system for areas through GMP A/B3500810 MopFloat GMP Stainless steel3500830 Metering insert 100 ml3500832 Metering insert 250 ml3500834 Metering insert 400 ml

MopFloat CRThe innovative, validatable impregnation system for cleanrooms without sterility requirements3500820 MopFloat CR Stainless steel3500830 Metering insert 100 ml3500832 Metering insert 250 ml3500834 Metering insert 400 ml

25-litre stainless steel containerWith scaling 8- and 16-litres3500032 25-litre stainless steel container Stainless steel3500078 Lid for 25-litre stainless steel container3530210 Rack for 25-litre stainless steel container Stainless steel for Clino CR5

Cleaning trolley with impregnation EasyMop GMP (stainless steel system box)

pg. 40 et seq.


pg. 40 et seq.for grey areas

pg. 56 et seq.


pg. 50 et seq.



pg. 56 et seq.


pg. 46 et seq.



pg. 56 et seq.


pg. 46 et seq.with flat wringer

pg. 50 et seq.

65


Work area

15-litre bucket, Polypropylene, with scaling from 1 – 10 litres 2015001 15-litre bucket 2015002 15-litre bucket 2015003 15-litre bucket 2015004 15-litre bucket 2015005 15-litre bucket 2000150 Lid for 15-litre bucket

9-litre stainless steel container Made from high-grade stainless steel with tightly welded handles 3500016 9-litre stainless steel container Stainless steel3500076 Lid for 9-litre stainless steel container3500060 9-litre container for mops with carrier for retrofitting

5-litre plastic container Scaling 1–4 litres 2088010 5-litre plastic container for all CR4 transparent in stainless steel-plastic combination

Can be used both as a tray (see image) and as a collecting container in disposal area pg. 45

15-litre bucket Ergo With ergonomic handle and scaling from 1 – 12 litres 2815001 15-litre bucket Ergo 2815012 15-litre bucket Ergo 2815004 15-litre bucket Ergo 2815006 15-litre bucket Ergo

Stainless steel container MopTen Made from high-quality stainless steel; for 10 mop covers; can be combined with MopJump3500022 MopTen Stainless steel3530187 Bucket support for MopTen3500210 MopJump

15-litre bucket with stainless steel handlePolypropylene, with scaling from 1 – 15 litres, autoclavable 3550009 15-litre bucket 3550010 15-litre bucket 3550008 15-litre bucket 2000155 Lid for 15-litre bucket with stainless steel handle

25-litre bucket Polypropylene, with scaling from 1 – 20 litres 2025001 25-litre bucket 2025002 25-litre bucket 2025003 25-litre bucket 2025004 25-litre bucket 2025005 25-litre bucket




pg. 56 et seq.




pg. 56 et seq.

Cleaning trolley with EasyMop

pg. 40 et seq.with MopFloat


pg. 50 et seq.

Cleaning trolley with EasyMop CR



pg. 50 et seq.

STE series for grey areas

pg. 56 et seq.




pg. 50 et seq.

CR6pg. 55

PP

S c

ompo

nent

s fo

r cl

eanr

oom

sys

tem

tro

lleys

66



Work area

MopJump system for 9-litre stainless steel container Enables the contactless reception of mops, autoclavable3500020 MopJump system for Stainless steel 9-litre stainless steel container2008008 MopJump system for 15-litre plastic bucket

ClinoBar bottle holder For all standard bottle sizes, incl. handle carrier 2870003 ClinoBar bottle holder 2870008 ClinoBar bottle holder 2870006 ClinoBar bottle holder

Bottle holder for 4 bottles Wire basket made of stainless steel, autoclavable Stainless steel2001209 Bottle holder for four bottles with handle carrier1901209 Bottle holder for four bottles without handle carrier

4-litre stainless steel containerWith scaling from 1-4 litres, autoclavable 3500007 4-litre stainless steel container Stainless steel3500074 Lid for 4-litre stainless steel container 3500070 4-litre stainless steel container

with swivel handle for retrofitting

6-litre bucket with stainless steel handle With scaling from 1-6 litres, autoclavable3550012 6-litre bucket 3550011 6-litre bucket 3550014 6-litre bucket 3550013 6-litre bucket 3550015 6-litre bucket

6-litre bucket with scaling from 1-5 litres2000601 6-litre bucket 2000602 6-litre bucket 2000603 6-litre bucket 2000604 6-litre bucket 2000605 6-litre bucket

Clino PlusBox For the impregnation of cloths and / or mops 2088611 Clino PlusBox 2088622 Clino PlusBox 2088633 Clino PlusBox 2088644 Clino PlusBox 2088666 Clino PlusBox 2088677 Clino PlusBox

for 9-litre stainless steel container and all 15-litre buckets

For all STE trolleysin the grey area pg. 56

For all C9 and C7 trolleysin the grey area pg. 59




pg. 50 et seq.

For CR6 series and grey areas

pp. 55, 58, 59

For all trolleys in the grey area

pp. 58, 59




pg. 50 et seq.for grey areas pg. 56 et seq.

67


Work and service area

Lid for 6-litre bucket With hooks for side mounting 2000610 Lid for 6-litre bucket transparent

Stainless steel basket For reception of four 6-litre buckets pg. 66 3550020 Stainless steel basket Stainless steel

Stainless steel tray For depositing utensils, autoclavable 3500036 Stainless steel tray Stainless steel

Handle carrier Permanently elastic and safe locking carrier: for handles ranging in size between 20 and 30 mm in diameter, autoclavable2017017 Toolflex 22 mm3550030 Handle carrier for Clino CR6

Clino MultiBox For enclosed appearance and open function on the trolley 2088620 Clino MultiBox 2088640 Clino MultiBox 2088660 Clino MultiBox 2088610 Clino MultiBox

Accessories for Clino PlusBox Includes foldable lid with grip recesses and insert for the absorption of surplus cleaning solution 2088650 Lid for Clino PlusBox 2088653 Insert for absorption of surplus cleaning solution

Sieve for Clino PlusBox Removable sieve for consistent impregnation of textiles 2088655 Sieve for Clino PlusBox


pp. 58, 59

For CR6 and CR6spg. 55

For Clino CR5pp. 47, 51

For all Clino system trolleys

For all STE trolleys in the grey area

pp. 57, 60

Cleaning trolley with EasyMop pg. 40 et seq. with MopFloat pg. 46 et seq. with flat wringer


Cleaning trolley with EasyMop pg. 40 et seq. with MopFloat pg. 46 et seq. with flat wringer


PP

S c

ompo

nent

s fo

r cl

eanr

oom

sys

tem

tro

lleys

68


Storage area for 3 mop framesCan be used for all PPS mop frames, autoclavable, for assembly variant 2 (stainless steel)3500088 Storage area for 3 mop frames

Holder frame for 4-litre stainless steel containerFits the ClinoLink holder system, autoclavable3500098 Holder frame for 4-litre stainless steel

containers, upper left* 3500099 Holder frame for 4-litre stainless steel

containers, upper right* * (when standing in front of the CR4) pg. 69

Holder frame for 4-litre stainless steel containerFits the ClinoLink holder system, autoclavable, for assembly variant 33500094 Holder frame for 4-litre stainless steel

container, middle pg. 69

Holder frame for Clino PlusBoxFits the ClinoLink holder system, autoclavable3500096 Holder frame for Clino PlusBox, upper left* 3500097 Holder frame for Clino PlusBox, upper right* * (when standing in front of the CR4) pg. 62

Holder frame for Clino PlusBoxFits the ClinoLink holder system, autoclavable, for assembly variant 33500095 Holder frame for Clino PlusBox, middle pg. 62

Carrier for 9-litre stainless steel container and 5-litre transparent plastic container pg. 69For attaching above the system boxes for assembly variant 43530188 Carrier for 9-litre stainless steel container, middle

Article No. Description Position Suitable for system trolley

Components for CR4

Cleaning trolley CR4with EasyMop pp. 42, 45with MopFloat pp. 48, 49with flat wringer

pp. 52, 53


pp. 52, 53


pp. 52, 53


pp. 52, 53


pp. 52, 53

For all CR4 variantswith EasyMop pp. 42, 45with MopFloat pp. 48, 49with flat wringer

pp. 52, 53

Cleaning trolley CR4with EasyMop pp. 42, 45

Carrier for mop frameCarrier for mop frame and handle fits multifunctional holder ClinoLink, autoclavable, for assembly variant 13500093 Carrier for handle, made of stainless steel 3500092 Mop frame support, made of stainless steel

pg. 69

6969

ClinoLink

Variable configurable connection system consisting of a

total of eight multi-functional holders for the object-specific

adjustment to the CR4 system trolley. All accessory parts

can easily be removed for cleaning.

The assembly variants 1 to 4 only represent a small sample

of the attachment possibilities. They can be attached either

on the left or on the right of the ClinoLink. The com ponents

listed on the opposite pg. 68 can be used at the following

positions:

The following shows the standard assembly variants 1 to 4

(also see pages 42, 45, 48, 49, 52 and 53)

ClinoLinkAssembly variant 1:With mop handle carrier and mop frame support

ClinoLinkAssembly variant 2:Contains 3 trays for various mop frames

ClinoLinkAssembly variant 3:Additional attachment of a stainless steel container, e. g. as deposit area or as a separate area for cloth release

ClinoLinkAssembly variant 4:Additional attachment of a 9-litre stainless steel container (only possible for EasyMop method)

2

1

3

4

6

5

7

8

PP

S c

ompo

nent

s fo

r cl

eanr

oom

sys

tem

tro

lleys

70

Swivel castors



Swivel castor CR 100 mm Autoclavable castors with double ball bearings 3500100 Swivel castor 100 mm 3500150 Swivel castor 100 mm with locking device

Swivel castor, electrically conductive 100 mm Electrically conductive castors with double ball bearings 2013430 Swivel castor 100 mm 2013440 Swivel castor 100 mm with locking device

Clino plastic swivel castor 125 mm Best running comfort and maximum ergonomics of the PPS cleaning trolley through ball bearing in running and turning direction2013115 Clino plastic swivel castor 125 mm2013117 Clino plastic swivel castor / F 125 mm with locking device

Deflector ringFor protection of walls in object through elastic sheath 2014030 for 22 mm tube with soft abutting edges 2014010 9 cm ø for 22 mm tube

For all Clino system trolleys with EasyMop



pg. 50 et seq.

For all Clino system trolleys with EasyMop



pg. 50 et seq.


pg. 56 et seq.

For all system trolleys without sterility requirements, for all system trolleys used in grey areas

pg. 56 et seq.

71

Disposal

Description Suitable for system trolley

MopDrop Contactless disposal of the mop3500019 MopDrop

Medium-sized disposal 1 x 35 litreFor the release of contaminated mopsDetails pg. 35• Sack holder frame• Insert 1 x 35 litre• 9-litre stainless steel container with carrier

Large disposal 1 x 70 litre For the release of contaminated mops Details pg. 35• Sack holder frame• Bag wire 1 x 70 litre• Sack support

Cleaning trolley CR1, CR4with EasyMop


pg. 46 et seq. with flat wringer

pg. 50 et seq.

Cleaning trolley CR9pg. 43

Cleaning trolley CR1, CR4 and CR9with EasyMop pg. 40 et seq. with MopFloat pg. 46 et seq. with flat wringer

pg. 50 et seq.

… and Clino PlusBox

Mini disposal with 4-litre stainless steel container ... e. g. for cloth release, suitable for multi-functional ClinoLink holder Details pp. 35, 69

Small disposal with 9-litre stainless steel container For mop release Details pg. 35


pp. 52, 53


PP

S c

ompo

nent

s fo

r cl

eanr

oom

sys

tem

tro

lleys

72



Disposal

Large sterile disposal bagFor disposal unit 1 x 70 litre or 2 x 70 litrePU: 10 parts3580017 Large sterile disposal bagDetails pg. 37

MemoBoard Lid for 70-litre disposal with reception for work instructions and the like, in A5 page format, laminated2806401 MemoBoard Clino 2806402 MemoBoard Clino 2806403 MemoBoard Clino 2806406 MemoBoard Clino

Medium-sized sterile disposal bagFor disposal unit 1 x 35 litre (CR1 and CR4)PU: 10 parts3580016 Medium-sized sterile disposal bagDetails pg. 37

Small sterile disposal bagFor 9-litre stainless steel container and all EasyMop GMP and CR system boxesPU: 10 parts3580015 Small sterile disposal bagDetails pg. 37

9-litre stainless steel containerCR3 pg. 54System box EasyMop GMPSystem box EasyMop CR

pg. 40 et seq., 63

Cleaning trolley CR1, CR4with EasyMop



pg. 50 et seq.


For all medium-sized and large trolleys in the grey area

pg. 55 et seq.

For all large trolleys in the grey area

pg. 562806411 MemoBoard Profi2806412 MemoBoard Profi2806413 MemoBoard Profi2806416 MemoBoard Profi

Release frame 1 x 35 litre Divides the disposal unit in two areas, e. g. for the separate release of contaminated mops and cloths 3530150 Release frame 1 x 35 litreDetails pg. 35

Mini sterile disposal bag For 4-litre stainless steel container and Clino PlusBox PU: 10 parts, delivery time: approx. 6 weeks3580014 Mini sterile disposal bagDetails pg. 37

Disposal 2 x 70 litre For separation of waste or separate release of mops and residual waste

• Sack holder frame • Bag wire 2 x 70 litre• Sack support


4-litre stainless steel containerClino PlusBox

For all medium-sized and large trolleys in the grey area

pg. 56 et seq.

7373

Look behind the scenesThe design of PPS cleanroom products must be proven in the cleanroom

For this reason, we conduct, for example, numerous tests

and analyses regarding the cleanability. At first glance, it

appears as if cleanliness rules, but …

when taking a closer look under UV light, the contamination

becomes clearly visible. Subsequently, the prescribed

cleaning procedure is carried out.

The renewed review shows that all particles were removed.

Test passed.

Of course, we also have our own tests confirmed by independent institutes, such as Fraunhofer IPA.

Look

beh

ind

the

scen

es

7474

The Clino KR/A series vacuums have

been specifically designed for use in

technical cleanrooms and in the

pharma ceutical industry. Due to its

modular design, it can be specifically

configured to meet the needs of dry

or wet vacuum operations. Even

special versions, such as compressed

air powered turbines for explosion

protected areas, are available:


Multi-level filter system

up to a separation level of

99.999%

Made entirely of high-quality

stainless steel

Autoclavable

Modular design: Object-specific

adjustments are possible

For the vacuuming of hazardous

dusts

Comprehensive range of

accessories

Can be delivered with 230 V,

400 V or powered by com-

pressed air

Made in Germany

High performance special equipment in modular design

Cleanroom vacuum Clino® KR/A

ULPA 15 / HEPA 14:Separation level at least 99.999%

Module structure: Wet and dry vacuum

Comprehensive accessory programme

7575

Cleanroom vacuum Clino® KR /A 10

Clino® KR/A 10Mobile, autoclavable cleanroom vacuum (dry vacuum) for the use in ISO class 4/5 cleanrooms. Specifi-cally designed for cleanroom use.

Made entirely of high-quality stainless steel

With a quadruple filter system Collection container and filter chamber autoclavable

Comprehensive accessories deliverable, autoclavable

All elements can be easily removed Soundproof turbo ventilator Simple operation and maintenance Fast and safe emptying Cable length: 8 m; with safety plug Non-marking special swivel castors, autoclavable

Delivery times upon agreement Including accessory set: 3590773 Hand pipe, 3590776 Suction hose CBS, 3590780 Floor nozzle with brush strip, 3590784 Joint nozzle and 3590788 Diagonal pipe nozzle

Clino® KR/A 10Art. No.: 3590710

Technical data Clino KR/A 10 Art. No.: 3590710

Output 1000 WVoltage 230 VNoise level 67 dB (A)Negative pressure max. 250 mbar

Container volume (dry) 10 lIntake volume (max.) 160 m3/hLength x width 400 x 400 mmHeight 760 mm

Separation level 99.999 %Empty weight 15 kg

With Hepa filter in front of ... ... and behind the motor, exhaust air is emitted near floor, optimal for use in clean-room

With sealable microfibre bags K4, fast and safe emptying through newly developed concept

With cable holder Pre-filter, PTFE coated, antistaticWith quick clamp

Cle

anro

om v

acuu

m C

lino

KR

/A

7676

Cleanroom vacuum Clino® KR /A 30

Made entirely of high-quality stainless steel

Technical data Clino KR/A 30

Output 1000 WVoltage 230 VNoise level 67 dB (A)Negative pressure max. 220 mbar

Container volume (dry) 30 lContainer volume (wet) 16 lIntake volume max. 150 m3/hLength x width 600 x 510 mm

Height 1010 mmSeparation level 99.999 %Empty weight 34 kg

Comfortable lowering of container; container with 4 castors

With float switch-off when used as a wet vacuum

Stainless steel trolley with 4 castors, electrically conductive

With security cable holder With suction pipe holder With quick clamp

Clino® KR /A 30The cleanroom Clino KR/A 30 has been developed for the intake of dust, wet production residues and liquids in the ISO class 4/5 cleanrooms. The handling is very easy due to the lower-able and easily removable container.Filter system during use as a dry vacuum

Microfibre bag, antistatic Polyester pre-filter, antistatic Optional activated carbon filter (gases, vapours, odours)

In front of the motor: HEPA H14 (99.999%) Behind the motor: HEPA H14 (99.999%)

Separation system during wet vacuum uses Float switch-off Optional activated carbon filter (gases, vapours, odours)

In front of the motor: HEPA H14 (99.999%) Behind the motor: HEPA H14 (99.999%) Delivery time upon agreement

Clino® KR/A 30Art. No.: 3590720 Dry vacuumArt. No.: 3590730 Wet vacuumArt. No.: 3590740 Vacuum for ex-areas

7777

Select a suitable product from our extensive range of accessories. We offer you all accessory parts in a standard design, autoclavable or suitable for explosion-protected areas. For this, please request our special cleanroom vacuum flyer.

AccessoriesEvery accessory is suitable for all cleanroom vacuums

Article No. Description Colour

High-tech suction hosesfor hand pipe Ø 38 mm, length: 3 m3590779 Nitrile suction hose (see image) Multi-layer Nitrile, extremely smooth interior3590776 CBS suction hose High-quality EVA plastic, very flexible

grey

blue

Floor nozzlesfor hand pipe, Ø 38 mm, 300 mm width; additional widths available upon request.

3590780 Floor nozzle with brush strips PA, for dry vacuum 3590710, 3590720, 35907403590781 Floor nozzle with rubber lip PA (see image), for wet vacuum 3590730

black

black

Hand pipe 3-parts, made of stainless steel, length 1340 mm, Ø 38 mm3590773 Hand pipe, 3-parts with mounting

for KR/A 10 and KR/A 30 stainless steel

Compartment nozzlefor hand pipe Ø 38 mm, 120 x 35 mm3590796 Compartment nozzle PA 200 mm3590797 Compartment nozzle silicone 200 mm (see image)

blacktransparent

Joint nozzlefor hand pipe Ø 38 mm3590784 Joint nozzle PA 300 mm (see image)3590785 Stainless steel joint nozzle 305 mm

blackstainless steel

Microfibre filter bags4-layer design, with sealing cap for secure disposal.Very high filter performance. Also suitable for vacuuming glass breakages with small amounts of liquid. Can be used for Clino KR/A 10 (3590710) and Clino KR/A 30 Dry vacuum (3590720)3590750 Microfibre filter bags white

Diagonal pipe nozzlesfor hand pipe Ø 38 mm3590788 Diagonal pipe nozzle PA 200 mm (see image)3590787 Diagonal silicone pipe nozzle 200 mm3590789 Diagonal stainless steel pipe nozzle 325 mm

blacktransparentstainless steel

Conical rubber pipe nozzle 90°for hand pipe Ø 38 mm, length 320 mmAdditional materials and bending radii available upon request.3590792 Conical rubber pipe nozzle 90 PA3590793 Conical rubber pipe nozzle 90 silicone (see image)

blacktransparent

Cle

anro

om v

acuu

m C

lino

KR

/A

78

Robust backing material

Cleanroom suitable bordering

High-tech equipment

open pockets, drainage function

Hollow-knitted bagging with sealed edges, autoclavable

Cleanroom-suitable mop design

79

Cleanroom suitability / purity suitability

Qualification

Certification as TESTED DEVICE by Fraunhofer

Sterility

Autoclavable and resistant against gamma radiation

Material compatibility

Tested with all standard disinfectants / groups of active substances

Material and processing

High-tech material

Special yarn made from 100% polyester microfiber processed in a manner

suitable for cleanrooms

Sealed edges

All material edges are bordered and / or sealed

Cleanability

Open pockets enable the rinsing of particles in the treatment process

Cleaning performance and reproducibility

99.9% of all particles

can be safely removed

Tested wetting process

guarantees reproducible disinfection success

Water absorption and water release

have been tested and appraised using scientific methods

Optimal cleaning performance

Adhering impurities and disinfection agent residues are safely removed

Cost-effectiveness

Very high square-metre cleaning rate

ensures low cost per application

High-quality manufacturing

enables 50 sterilisation cycles or over 100 treatment cycles without sterilisation

Cle

anro

om-s

uita

ble

mop

des

ign

80

Our reusable mops represent the

state-of-the-art in cleanroom cleaning.

Innovative materials – that can stand

up to the wear of numerous wash and

sterilisation cycles and simultaneously

achieve validatable cleaning and dis-

infection processes.


Manufactured from

high-tech materials suitable

for the cleanroom

Cleaning efficiency and

particle emission approved

by an expert report*

* for models with IPA certificate

Qualified for the use in areas

under sterile conditions

GMP A/B

Up to 50 sterilisation cycles

possible

Therefore low costs per use

Products can also be leased

The reference class

Individualisation

Individual labelling of different areas through printing (in colour or black and white)

Attachment of barcode labels

Sewing in of RFID chips

Clino® CRSpecial mops – reusable

All types of special solutions are feasible within a short period of time

Suitable for all PPS mop frames:

• Clino stainless steel

• Clino stainless steel with Clino Connect

• Aluminium with Clino Connect

• Stainless steel wire with Clino Connect

• Inverse with Clino Connect

• Additional mop frames pg. 94

81

King GMPArt. No.: 3500051

Removes 99.9 % of all particles in a single-stage process

Safe disinfection of GMP areas through validatable wetting process

Autoclavable up to 50 processing cycles, resistant to disinfection agents and gamma radiation

Optimised for the EasyMop GMP impregnation method

Minimal amount of particle emission

Types of floors All standard cleanroom and pharmaceutical floors

Working material 100 % high-tech manufactured polyester microfiber yarn suitable for the cleanroom – hollow-knitted bagging with sealed edges

Equipment Loop along the same lines as working material, with cover specifically suited for impregnation, polyester pocket with drainage function

Weight 160 gDimensions 40 cmPackaging Packaging Unit: 10 parts Also deliverable in smaller quantities

King CRArt. No.: 3500040




Optimised for the flat wringer Ringo GMP



Working material 100% high-tech manufactured polyester microfiber yarn suitable for the cleanroom – hollow-knitted bagging with sealed edges

Equipment Loop along the same lines as working material, special laminated cover, textile pocket with drainage function


ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

Spe

cial

mop

s –

reus

able

82

King CR-MGArt. No.: 3500052

100 % polyester microfiber with high-low structure

Optimal gliding characteristics, suitable for perforated floors

Autoclavable

High particle absorption through special weaving process

Low particle emission

Types of floors All standard cleanroom and pharmaceutical floors, perforated floors

Working material 100% high-tech manufactured polyester microfiber yarn suitable for the cleanroom – hollow-knitted bagging with sealed edges, processed in special locking technology

Equipment with cover, with polyester pocket

Weight 60 gDimensions 40 cmPackaging Pre-washed, single, double-packaged

Lord CRArt. No.: 3500048

For cleaning and disinfection of GMP areas

Short loop form, good gliding characteristics


Optimised for flat wringer



Working material 100% high-tech manufactured polyester microfiber yarn suitable for the cleanroom – hollow-knitted bagging with sealed edges, medium-sized loop form

Equipment Loop along the same lines as working material, with cover, textile pocket with drainage function



ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

83

King CR-MG PlusArt. No.: 3500062

100% polyester microfiber with high-low structure, with loop

Optimal gliding characteristics, suitable for perforated floors

Autoclavable, not suitable for chlorine-based disinfectants

High particle absorption through special weaving process

Low particle emission

Types of floors All standard cleanroom and pharmaceutical floors, perforated floors

Working material 100% high-tech manufactured polyester microfiber yarn suitable for the cleanroom – hollow-knitted bagging with sealed edges, along the lines of equipment, processed in special locking technology

Equipment Loop with cover, with microfiber backfilling, polyester pocket with drainage function, with microfiber and PU foam backfilling

Weight 120 gDimensions 40 cmPackaging Pre-washed, single, double-packaged

MicroSicuro CR/AArt. No.: 2700268



Maximal square metre cleaning rate through use of innovative material combination, ideal for removal of disinfection agent residues


Through maximum capillary effects, optimally suited for all PPS cleaning methods

Types of floors All standard cleanroom and pharmaceutical floors, perforated floors and anti-slip flooring

Working material 100% PES microfibers with special soft bristleEquipment With permeable cover, polyester pocket with

drainage function, with backfilling for high square metre cleaning rate


ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

Spe

cial

mop

s –

reus

able

84

MicroMopp Standard CR/AArt. No.: 3500067

Fully enclosed construction made from 100% polyester micro loops, right-angled mop design for optimal use in corners

Very good gliding characteristics, not suitable for chlorine-based disinfectants

Suitable for dissolving adhesive contamination

Suitable for impregnation and flat wringer

Autoclavable


Working material 100% PS microfiber with polypropylene bristleEquipment With permeable cover, with polyester pocket

with drainage function, with PU backfilling for high square metre cleaning rate

Weight 110 gDimensions 40 cmPackaging 100 parts per carton Also deliverable in smaller quantities

MicroSicuro CRArt. No.: 2700266

Maximal cleaning performance through 2-component working material

Ideal for dissolving adhesive contamination

Over 99 % reduction of contamination due to bacterium, yeast and mildew is already achieved when using only ionised water (test method DGMH 2001 Standard method 14)

Very high square-metre cleaning rate

Through maximum capillary effects, optimally suited for all PPS cleaning methods

Types of floors All standard cleanroom and pharmaceutical floors, perforated floors and anti-slip flooring

Working material 100 % PES microfibers with PA bristle materialEquipment With permeable cover, with belt pocket with

drainage function, with backfilling for high square metre cleaning rate



ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

85

Mop CR for wall cleaning toolArt. No.: 3580038Art. No.: 3580039 MicroSicuro CR/A for wall cleaning tool

100 % polyester microfiber continuous filament yarn

For cleaning walls, ceiling and hard-to-access areas

Autoclavable, resistant to disinfection agents

High-quality stainless steel push buttons

Surfaces All smooth surfacesWorking material 100% high-tech manufactured polyester

microfiber yarn suitable for the cleanroom – hollow-knitted bagging with sealed edges, medium loop form

Equipment High-quality stainless steel push buttonsWeight 160 gDimensions: 40 cmPackaging Pre-washed, single, double-packaged

MicroSicuro Trapez CR/AArt. No.: 2700293



Maximal square metre cleaning rate through use of innovative material combination, ideal for removal of disinfection agent residues


For the surface cleaning of, for example, isolators and cleaning of difficult-to-reach places

Suitable for all Trapez mop frames pg. 99

Types of floors All smooth surfacesWorking material 100 % PE microfibers with special soft bristleEquipment With permeable cover, with polyester pocket

with drainage function, with backfillingWeight 80 gDimensions longer side: 27 cm, shorter side: 22 cmPackaging Packaging Unit: 10 parts Also deliverable in smaller quantities

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

Spe

cial

mop

s –

reus

able

86

In small areas, where the logistical

effort for the use of reusable textiles

would be too high, single-use mops

are a practical solution. When working

with harmful substances, such as

cytostatics, you will have a higher

level of safety.


Made from special yarn,

specially suited for cleanrooms

Water retention for high square

metre cleaning rates

If desired, available as sterile

double-packaged (gamma irra-

diated with lot documentation,

batch documentation and indica-

tor): Therefore, it can be directly

introduced into areas under

sterile conditions GMP A/B

Different variants and

packaging units are available

Pocket mop system:

Compatible with all Clino mop

framesThe practical solution – with certainty

Pocket mop system for easy mop change, even for single-use mops

Processed with ultrasonic technology

If required, available in sterile

Clino® CRSpecial mops – single-use and accessories








87

King CR wiper mopArt. No.: 3500055Art. No.: 3500056, gamma irradiated

Cost-efficient single-use mop

If desired, available sterile double-packaged

Ideally suited for cytostatic areas

High levels of area output through backfilling

Very high-quality, processing suitable for cleanrooms


Working material 100% polyesterEquipment with polyester pocket,

with backfillingWeight 50 gDimensions 40 cmPackaging Pre-washed, single, double-packaged

King CR wiper mop SArt. No.: 3500066Art. No.: 3500068, gamma irradiated

Excellent cleaning performance due to 100% polyester microfibers

Special structure for optimal particle reception

Very high-quality, processing suitable for cleanrooms

High levels of area output through backfilling

Also ideal for wall and ceiling cleaning, can be sterilised


Working material 100% polyester with special structureEquipment with polyester pocket,

with backfillingWeight 50 gDimensions 40 cmPackaging 3500066: 100 parts per carton Also deliverable in smaller quantities 3500068: Pre-washed, single, double-packaged

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

Spe

cial

mop

s –

sing

le-u

se a

nd a

cces

sorie

s

88

King CR wiper mop PUArt. No.: 3500057

PU foam backfilling as water retention

For small areas

Sealed edges

Not suitable for chlorine-based disinfectants


Working material 100% polyesterEquipment with PU backfilling, with cover,

with polyester pocketWeight 30 gDimensions 40 cmPackaging Pre-washed, single, double-packaged

Clino® CRSpecial mops – single-use

ISO 3 4 5 6 7 8 9GMP A/B C D

Sterile, single-use eyewearArt. No.: 3580020

Highest level of wearing comfort, suitable for eyeglass wearers

Indirect ventilation system ensures high degree of safety

Highest degree of protection and robustness

Scratch-proof

No fogging due to Anti-Fog feature

Validated ETO sterilisation for use in all areas under sterile conditions

Developed for use in areas up to ISO class 4

Dimensions 17x8x7 cmWeight 72 gPackaging Packaged individually and under sterile

conditions in Tyvek/PE 10 glasses repackaged in Tyvek/PEMaterial Frame made of lightweight PVC Silicone band, not outgassing Sight glass made of polycarbonateSight glass thickness 2.00 mmShelf life 3 years from the sterilisation dateClassification Category 2 as per PPE Directive 89/686/EEC

ISO 3 4 5 6 7 8 9GMP A/B C D

89

PPS special reusable mops with

icon are autoclavable

90

Even the immediate surroundings of

cleanroom areas pose high require-

ments on the quality of the cleaning:

Apart from the overall impression the

area makes, the contamination already

removed from this area cannot be

returned to the previously controlled

area. For this, we recommend the

following mops from our professional

series, which have, in part, also been

verified and certified.


Highest quality from the

professional industrial cleaning

Maximum cleaning and

area output

Best processing quality

Extreme durability

of up to 500 washing cycles

Professional mops for use outside of cleanrooms, in controlled areas and for primary cleaning

High level of dirt removal forces through soft bristles

High-tech loop for greatest absorption of small and large dirt particles

Robust pocket design

Mops for grey areas








91

PPSC MicroTecArt. No.: 2700531

The PPSC MicroTec was tested in accordance with the stringent requirements of the “Nordic Eco Label”

Over 99 % reduction of germs due to bacterium, yeast and mildew is already achieved when using only ionised water (test method DGMH 2001 Standard method 14)

Maximum cleaning efficiency

Excellent suitability for slip-resistant tiles

Types of floors All water-resistant hard floor coverings, anti-slip flooring

Working material High-tech microfibers 100% PES with PA bristleEquipment Loop made from TEC polyester,

with cover, including belt pocket extremely tear-resistant, with backfilling

Weight 130 gDimensions 40 cmPackaging Pre-washed, 50 parts in a carton

Also deliverable in smaller quantities

MicroSicuro PlusArt. No.: 2700535

For all smooth and structured hard flooring, for slip-resistant tiles

Over 99 % reduction of germs due to bacterium, yeast and mildew is already achieved when using only ionised water (test method DGMH 2001 Standard method 14)

Maximum efficiency

Excellent suitability for slip-resistant tilesn

Types of floors All water-resistant hard floor coverings, anti-slip flooring

Working material High-tech microfibers 100% PES with PA bristleEquipment Loop made from TEC polyester,

with cover, with belt pocket extremely tear-resistant, with backfilling

Weight 130 gDimensions 40 cmPackaging Pre-washed, 50 parts in a carton


ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D M

ops

for

grey

are

as

92

MicroMopp PlusArt. No.: 2700530

Wet and moist cleaning in single-stage technique

Dry cleaning, sealed parquet floors, laminate

With special loop for excellent dirt pick-up

Types of floors For all smooth hard floorsWorking material High-tech microfibers 100% PESEquipment Loop made from TEC polyester,

with cover, with belt pocket extremely tear-resistant, with backfilling

Weight 130 gDimensions 40 cmPackaging Pre-washed, 50 parts per carton


MicroSicuroArt. No.: 2700246

Excellent cleaning performance

Germ-reducing effect, same as PPSC MicroTec

For all smooth and structured hard floors, for slip-resistant tiles

Types of floors All smooth hard floorsWorking material High-tech microfibers 100% PES with PA bristleEquipment with cover,

with belt pocket extremely tear-resistant, with backfilling



Mops for grey areas

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

Art.-Nr. 2700202 MicroMopp same as MicroMopp Plus without loop Weight: 120 g

93

KingArt. No.: 2140020

Maximum surface capacity, excellent dirt pick-up capability

The reference product in one- and two-step technique

The best tuft quality, ready to use, pre-washed

Types of floors All water-resistant hard floorsWorking material Synthetic / Viscose yarn (50 / 50)Equipment with cover,

with PVC pocket, Double sealing of the pocket seam



MicroKingArt. No.: 2140080

Characteristics as Mopp King

Maximal dirt pick-up capability

Maximal cleaning performance through additional rows of microfibers

Ready to use, pre-washed

Types of floors All water-resistant hard floorsWorking material Synthetic / Viscose yarn (50 / 50) with additional

rows of microfibersEquipment with cover,

with PVC pocket, Double sealing of the pocket seam



ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D M

ops

for

grey

are

as

94

Mop frames and handles

Article No. Description

Mop frames / Handles

Aluminium mop frameWeight-saving through aluminium• Mechanism made of stainless steel, aluminium plate, autoclavable• Contactless release of the mop with MopDrop2009160 Aluminium mop frame with Clino Connect2009161 Aluminium mop frame with Clino Connect Lock2009100 Aluminium mop frame with stainless steel handle reception

Stainless steel wire mop frame Very low weight• Autoclavable• Contactless release of the mop with MopDrop2009560 Stainless steel wire mop frame with Clino Connect2009561 Stainless steel wire mop frame with Clino Connect Lock2009500 Stainless steel wire mop frame with stainless steel handle reception

Stainless steel inverse mop frameIn particular for single-use mop• Autoclavable • Stainless steel plate on the bottom• Not suitable for flat wringer2009460 Stainless steel inverse mop frame with Clino Connect2009461 Stainless steel inverse mop frame with Clino Connect Lock2009470 Stainless steel inverse mop frame with stainless steel handle reception

Stainless steel wall cleaning unitFor wall and ceiling cleaning• Made entirely of stainless steel, autoclavable• With locking screw• With stainless steel handle reception3580033 Stainless steel wall cleaning unit

One-piece mop frame GMPHygienic safety through 100 % stainless steel• Handle and handle reception made from a single piece• Smooth finishing• Autoclavable • Total length: 1.6 m3500902 Stainless steel mop frame with stainless steel handle, one-piece GMP conform3500913 Stainless steel mop frame with inverse, one-piece GMP conform

Clino CR stainless steel mop frameRobust and durable through stainless steel• Autoclavable• Contactless release of the mop with MopDrop pg. 36 2009060 Clino CR stainless steel mop frame with Clino Connect2009061 Clino CR stainless steel mop frame with Clino Connect Lock

Clino CR stainless steel mop frameAll mop frames are also available with stainless steel handle reception2009050 Clino CR stainless steel mop frame

All PPS mop frames are available with a stainless steel handle reception as well as the Clino Con-

nect quick change system (without clamping) and Clino Connect Lock (with clamping) pg. 34

95

Article No. Description

Mop frames / Handles

Mop frame Clino Ergo EMPerfect functionality with minimal weight, autoclavable• Hygienic design: Entirely enclosed areas• High loading capacity through innovative material• Very low weight: Ideal for wall and ceiling cleaning2520150 Clino Ergo EM mop frame with Clino Connect2520151 Clino Ergo EM mop frame with Clino Connect Lock

Mop frame Clino Ergo FP• Hygienic design: Entirely enclosed areas, autoclavable• High loading capacity through innovative material• Very low weight: Also ideal for ceilings and walls• Suitable for flat wringer Ringo and Ringo GMP2520100 Mop frame Clino Ergo FP

Trapez mop frame with Clino ConnectIdeal for cleaning hard-to-reach areas• Trapezoidal 22 / 27 cm, autoclavable• Very low weight: Also ideal for ceilings and walls• Available in stainless steel and in plastic design2009580 Trapez stainless steel mop frame with Clino Connect Lock2520300 Trapez plastic mop frame with Clino Connect Lock pg. 99

Stainless steel telescopic handle, autoclavable2016115 Stainless steel telescopic handle, 1.0 to 1.8 m with tilting lever2016120 Stainless steel telescopic handle, 1.0 to 1.8 m with tilting lever,

sleeve and quick closing mechanism for ClinoConnect and ClinoConnect Lock2016110 Stainless steel telescopic handle, 0.7 to 1.2 m with tilting lever2016112 Stainless steel telescopic handle, 0.7 to 1.2 m with tilting lever,

sleeve and quick closing mechanism for ClinoConnect and ClinoConnect Lock

Aluminium telescopic handle• Autoclavable3516050 Aluminium telescopic handle, 1.0 to 1.8 m

with tilting lever, white3516051 Aluminium telescopic handle, 1.0 to 1.8 m

with tilting lever, white, with sleeve and quick closing mechanism for Clino Connect and Clino Connect Lock

Aluminium telescopic handle, short• Autoclavable3516055 Aluminium telescopic handle, 0.7 to 1.2 m

with tilting lever, white3516056 Aluminium telescopic handle, 0.7 to 1.2 m

with tilting lever, white, with sleeve and quick closing mechanism for ClinoConnect and ClinoConnect Lock

Aluminium handle• Autoclavable3516060 Aluminium handle 30 cm, white3516080 Aluminium handle 50 cm, white3516070 Aluminium handle 70 cm, white3516090 Aluminium handle 1.4 m, white

Suitable for all PPS mop frames




Mop

fra

mes

and

han

dles

3516062 Aluminium handle 30 cm, white*3516082 Aluminium handle 50 cm, white*3516072 Aluminium handle 70 cm, white*3516092 Aluminium handle 1.4 m, white** with quick closing mechanism for

Clino Connect and Clino Connect Lock

96

While in areas under sterile conditions

the doubled-packaged single-use wip-

ers ensure maximum safety, in

non-sterile areas the use of reusable

microfiber wipers can be a great de-

gree more economical.


Maximum efficiency through

polyester microfibers

Reusable products can be

recycled up to 50 times

Suitable for the impregnation in

the PlusBox

Single-use products also

available double-packaged and

gamma irradiated

Single-use and reusable wipers for cleanrooms

Ideally suited for impreg-nation method

pg. 33

Easy handling with the PlusBox

Electrostatically derivable

Clino® CR wiper programme

The Clino PlusBoxes are available in up to 6 different colours

4-litre stainless steel container and

PlusBox can be equipped with sterile

disposal bags:

pg. 37

pg. 33

97

Clino® CarbonElectrostatically derivable wiperArt. No.: 3600095Art. No.: 3600098

• Reusable wiper• Electrostatically derivable• Autoclavable• Low particle emission

Surfaces For all smooth, water-resistant surfacesMaterial Polyester / carbon, with linking seamDimensions Art. No.: 3600095: 26 x 26 cm

Art. No.: 3600098: 35 x 34 cmWeight Art. No.: 3600095: 10 g

Art. No.: 3600098: 16 gPackaging Packaging Unit: 5 parts


Clino® Ultra CRFor all smooth surfacesArt. No.: 2660005Art. No.: 2660006

• Reusable wiper, autoclavable• >99 % reduction of germs due to bacterium, yeast and mildew

through use of PPSC textiles achieved when using only ionised water (Test method DGMH 2001 Standard method 14)

Surfaces For all non-structured surfacesMaterial Polyester / polyamide (80 / 20) with linking seamDimensions Art. No.: 2660005: 31 x 38 cm

Art. No.: 2660006: 60 x 60 cmWeight Art. No.: 2660005: 28 g

Art. No.: 2660006: 70 gPackaging Packaging Unit: 5 parts


Clino® glass wiperThe very fine super microfiber enables the streak-free cleaning of all smooth surfacesArt. No.: 2650002 – blueArt. No.: 2650004 – green

• Reusable wiper• non-sterile

Surfaces For all very smooth surfaces such as glass, mir-rors, etc.

Material Polyester / polyamide (80 / 20), with linking seamDimensions 40 x 38 cmWeight 48 gPackaging Packaging Unit: 50 parts, 5 PU per carton


ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

Clin

o C

R w

iper

pro

gram

me

98

Clino® One Way ProfessionalSingle-use wiper for the cleanroomArt. No.: 3600085

• High absorption rate• Low particle emission• Washed and packaged in cleanroom class 10

Surfaces All smooth surfacesMaterial 100 % polyester, outstanding durability

due to double-knitted structural design with heat cut edges

Dimensions 23 x 23 cmWeight 6 gPackaging PU: 1 package with 150 parts,

1 carton contains 8 PU

Clino® One Way PremiumSingle-use wiper for the cleanroomArt. No.: 360009

• High-dense stitching• Low particle emission• Washed and packaged in cleanroom class 10

Surfaces Material

Dimensions Weight Packaging

All smooth surfaces 100 % microfiber, knitted structural form with ultrasonically sealed edges 30 x 30 cm g / wiper PU: 50 parts, 1 carton contains PU

Clino® One WaySingle-use wiper for the cleanroomArt. No.: 3600070

• Excellent absorption capacity• High abrasion resistance• Low release of particles and fibres

Surfaces All smooth surfaces in the semiconductor and pharmaceutical industries

Material nonwoven, cellulose / polyesterDimensions 23 x 23 cmWeight 3 g / wiperPackaging PU: 1 package with 300 parts,

1 carton contains 8 PU

Clino® CR wiper programme

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

ISO 3 4 5 6 7 8 9GMP A/B C D

99

2009580 Trapez stainless steel holder for surface cleaning with Clino Connect Lock

3516062 Aluminium handle 30 cm3516082 Aluminium handle 50 cmSuitable for all handles with Clino Connect Lock pg. 95

2520300 Trapez plastic holder for surface cleaning with Clino Connect Lock

3516062 Aluminium handle 30 cm3516082 Aluminium handle 50 cmSuitable for all handles with Clino Connect Lock pg. 95

2700293 Mop MicroSicuro Trapez CR/A for surface cleaning

pg. 85

3580010 Stainless steel squeegee 25 cm3580011 Rubber lip replacement 25 cm

3580012 Stainless steel squeegee 35 cm3580013 Rubber lip replacement 35 cm

2700603 Flexible holder also available with telescopic handle2700602 Mop MicroSicuro for flexible holder

3590100 Broom for hygienically sensitive areas

Material: Body: PP setting: PBT Dimensions (LxWxH): 300 x 70 x 120 mm

3590200 Handle for hygienically sensitive areas, L 1.45 m

Material: Anodised aluminium pipe3590210 Telescopic handle for hygienically

sensitive areas, L 2.2 – 4.0 m Material: Anodised aluminium pipe

Problem solver for special cases

Article No. Description | Characteristics Application information

Problem solver

• For glass cleaning• Autoclavable

• For surface cleaning• For isolator cleaning• For wall and ceiling cleaning• Autoclavable

• For surface cleaning• For isolator cleaning• For wall and ceiling cleaning• Autoclavable

• For Trapez stainless steel (2009580) and plastic (2520300) holders

• Autoclavable• For isolator cleaning

• Cannot be autoclaved• For grey areas

Pro

blem

sol

ver

for

spec

ial c

ases

100

3590500 Handle brush for hygienically sensitive areas

Material: Body: PP setting: PBT Dimensions (LxWxH):

400 x 48 x 70 mm

3590510 Joint scrubber for hygienically sensitive areas

Material: Body: PP setting: PBT Dimensions: L 490 mm

3590600 Joint brush for hygienically sensitive areas

Material: Body: PP setting: PBT Dimensions (LxWxH):

410 x 50 x 40 mm

• Setting height 35 mm• unslotted fibre ends• hard bristle material• white

• Setting height 45 mm• unslotted fibre ends• medium-hard bristle material• white

• Setting height 42 mm• sharpened fibre ends• medium-hard bristle material• white

Suitable for handle• 3590200• 3590210 Telescopic handle

pg. 99

Problem solver for special cases

Article No. Description | Characteristics Application information

Problem solver

3590300 Hand broom with run direction for hygienically sensitive areas

Material: Body: PP, setting: PBT Dimensions (LxWxH): 310 x 40 x 90 mm

3590400 Dustpan for hygienically sensitive areas

Material: Stainless steel Dimensions (LxWxH):

400 x 220 x 55 mm

• Setting height 45 mm• unslotted fibre ends• hard bristle material• white

• Made entirely of stainless steel• autoclavable

3400715 Squeegee white Material: Body: PP Lip: TPE Dimensions: 56 cm

101

Clino Connect in connection with CR4Assemble your own individual mop carrier system and quickly and easily change the mop carrier with the Clino Connect connection system pp. 34, 94

102

Subject index

A Page

Autoclavable special castors. . . . . . . . . . 70Autoclavability. . . . . . 16, 23, 41 et seq., 89

BBottle holder . . . . . . . . . . . . . . . . . . . . . . 66Brooms, brushes . . . . . . . . . . . . . . 99, 100Bucket . . . . . . . . . . . . . . . . . . . . 65 et seq.Bucket-sieve system, two-stage . . . . . . 30Business fields PPS . . . . . . . . . . . . . . . . 10Business hours . . . . . . . . . . . . . . . . flap text

CCastors . . . . . . . . . . . . . . . . . . . . . . . . . . 70Change between single- and two-stage wiping process . . . . . . . . . . . 28, 51 et seq.Cleanability . . . . . . . . . . . . . . . . . . . . 15, 16Cleaning and disinfection system Clino CR. . . . . . . . . . . . . . 3, 38 et seq.Cleanroom-suitable mop design. . . . 78, 79Cleaning methods. . . . . . . . . . . . . . . . . . 19 Additional cleaning methods . . . . . . 30 EasyMop GMP and CR . . . . 20 et seq. Flat wringer Ringo GMP and Clino stainless steel. . . . . . . . . . 28, 29 MopFloat GMP and CR . . . . . . . 26, 27Cleaning trolley for grey areas . . . . . . . . 56Cleaning trolley for impregnation . . . . . . . . . . . . . . . . . . . . . 20 et seq., 40 et seq.Cleaning trolley with flat wringer . . . . . . . . . . . . . . . 28, 29, 52 et seq., 56 et seq.Cleaning trolley with MopFloat . . . . . . . . . . . . . . . . . . . 26, 46 et seq.Cleanroom classification. . . . . . . . . . 12, 13Cleanroom class indicator. . . . . . . . . . . . . . . . . . . . . . see flap text, 12, 41 et seq.Cleanroom compatibility . . . . . . . . . . . . . 17Cleanroom-compliant trolley design . . . . 38Cleanroom vacuum Clino KR/A. . 74 et seq.Cleanroom wipers . . . . . . . . . . . . . . . . . 96Clino Connect . . . . . . . . . . . . . . . 34, 94, 95Clino Connect Lock. . . . . . . . 34, 94, 95, 99Clino CR Cleaning and disinfection system for cleanrooms . . . . . . 3, 8, 38 et seq.Clino CR model series . . . . . . . . 39 et seq. Clino CR mini EM-CR 1 . . . . . . . . . . 44 Clino CR mini EM-CR 2 . . . . . . . . . . 44 Clino CR mini EM-GMP 1 . . . . . . . . 41 Clino CR mini EM-GMP 2 . . . . . . . . 41 Clino CR mini MF-CR. . . . . . . . . . . . 47 Clino CR mini MF-GMP . . . . . . . . . . 41 Clino CR1 EM-CR . . . . . . . . . . . . . . 44 Clino CR1 EM-GMP. . . . . . . . . . . . . 41 Clino CR1 FP-CR . . . . . . . . . . . . . . . 51 Clino CR1 FP-GMP . . . . . . . . . . . . . 51 Clino CR1 MF-CR . . . . . . . . . . . . . . 47

Clino CR1 MF-GMP. . . . . . . . . . . . . 47 Clino CR3 FP-GMP . . . . . . . . . . . . . 54 Clino CR4 EM-CR . . . . . . . . . . . . . . 45 Clino CR4 EM-GMP. . . . . . . . . . . . . 42 Clino CR4 FP-CR . . . . . . . . . . . . . . . 53 Clino CR4 FP-GMP . . . . . . . . . . . . . 52 Clino CR4 MF-CR . . . . . . . . . . . . . . 49 Clino CR4 MF-GMP. . . . . . . . . . . . . 48 Clino CR4 with ClinoLink multifunctional holder . . . . . 38, 62, 69 Clino CR5 FP-GMP . . . . . . . . . . . . . 51 Clino CR5 MF-GMP. . . . . . . . . . . . . 47 Clino CR6 FP . . . . . . . . . . . . . . . . . . 55 Clino CR6s FP . . . . . . . . . . . . . . . . . 55 Clino CR6xs FP . . . . . . . . . . . . . . . . 55 Clino CR9 EM-GMP. . . . . . . . . . . . . 43 Clino E1e . . . . . . . . . . . . . . . . . . . . . 57 Clino E1 MF. . . . . . . . . . . . . . . . . . . 58 Clino Profi C5e. . . . . . . . . . . . . . . . . 58 Clino Profi C5 MF . . . . . . . . . . . . . . 58 Clino Profi C7e. . . . . . . . . . . . . . . . . 59 Clino Profi C7 MF . . . . . . . . . . . . . . 59 Clino Profi C9. . . . . . . . . . . . . . . . . . 59 Clino stainless steel flat wringer . . . . . . . . . . . . . . . . 29, 50 Clino STEC20. . . . . . . . . . . . . . . . . . 57 Clino STEC20 with disposal unit . . . . . . . . . . . . . . 57 Clino STEC7 with Clino Multibox and PlusBox. . . 60 Clino STEC7 MF with Clino Multibox and PlusBox. . . 60 Clino STEC9K with Clino Multibox and PlusBox. . . 60Clino KR /A 10 . . . . . . . . . . . . . . . . . . . . . 75Clino KR /A 30 . . . . . . . . . . . . . . . . . . . . . 76ClinoLink multifunctional holder . 38, 62, 69 Assembly variant 1 . . . . . . . . . . 62, 69 Assembly variant 2 . . . . . . . . . . 62, 69 Assembly variant 3 . . . . . . . . . . 62, 69 Assembly variant 4 . . . . . . . . . . 62, 69 Complete assembly options . . . 62, 69Closed system with buit-in safety . . . . . 20Cloth disposal . . . . . . . . . . . . . . . 33, 35, 72Colour coding . . . . . . . . . . . . 32, 62 et seq.Construction . . . . . . . . . . . . . . . . . . . . . . . 9Contact data PPS . . . . . . . . . . . . . Flap textContactless workflow. . . 28, 36, 40 et seq.Controlled areas . . . . . . . . . . 56 et seq., 90Cost-effectiveness . . . . . . . . . . . . . . 14, 17

DDelivery of samples . . . . . . . . . . . . . . . . . 7Design and processing . . . . . . . . . . . . . . 16Design trolley Stainless steel . . . . . . . . . . . 39 et seq. Stainless steel / plastic . . . . . 39 et seq.

Dimensions. . . . . . . . . . . . . . . . . 41 et seq.Disposal bag, sterile . . . . . . . . . . . . . 37, 72Disposal variants. . . . . . . . . . 35, 71 et seq.Dousing method. . . . . . . . . . . . . . . . . . . 30

EEasyMop CR Impregnation . . . . . . . . . . . . . 20 et seq., 40 et seq.EasyMop CR Operating sequence . . . . . 24EasyMop GMP and CR system boxes . . . . . . . . . . . . . . . . . . . . . . . . . 23, 63EasyMop GMP Impregnation . . . . . . . . . . . . . 20 et seq., 40 et seq.EasyMop GMP Operating sequence . . . 22Effectivity . . . . . . . . . . . . . . . . . . . . . . . . 15Efficiency . . . . . . . . . . . . . . . . . . . . . 14, 17Electrically conductive castors . . . . . . . . 70E-mail . . . . . . . . . . . . . . . . . . . see flap textThe company . . . . . . . . . . . . . . . . . . . . . . 6Ergonomics. . . . . 14, 20, 23, 26, 28, 41, 46Examples Clino CR4 . . . . . . . . . . . . . . . . 62Express delivery . . . . . . . . . . . . . . . . . . . . 7

FFax . . . . . . . . . . . . . . . +49 (0) 8 31 / 61 0 84Financing, leasing . . . . . . . . . . . . . . . . . . . 7Flat wringers Ringo GMP and Clino stainless steel. 28, 29, 50 et seq.Flexibility. . . . . . . . . . . . . . . . . . . . . . . . . 28Flexible holder . . . . . . . . . . . . . . . . . . . . 99Fraunhofer Tested Device . . . . 16, 20, 28, 38 et seq., 81, 83, 87

GGMP conformity . . . . . . . . . . . . . 20, 26, 28Grey areas . . . . . . . . . . . 32, 56, 90 et seq.

HHandles and mop frames . . . . . . . . . . . . 95Holder Trapez, stainless steel and plastic . . . . . . . . . . . . . . . . . 95, 99Hygienic design . . . . . . . . . . . . . 16, 26, 38Hygienic zone concept . . . . . 32, 62 et seq.

IImpregnation EasyMop CR . . . . . . . . . . . . . 20 et seq., 40 et seq.Impregnation EasyMop GMP . . . . . . . . . . . . . 20 et seq., 40 et seq.In clean rooms, cold and hard facts dictate . . . . . . . 16Individualisation . . . . . . . . . . . . . . 9, 32, 62Individualisation reusable mop . . . . . . . . 80Innovations . . . . . . . . . . . . . . . . . . . . . . . . 8Introduction into areas under sterile conditions . . . . . . . . . . 23ISO certification . . . . . . . . . . . . . . . . . 8, 12

103

© Reprints – in whole or in part – are only permitted with prior express written permis-sion of Pfennig Reinigungstechnik GmbH. All information, articles and images published in this catalogue are protected by copyright. Any use not permitted by copyright law requires the prior express written permission of Pfennig Reinigungs-technik GmbH. In particular, this applies to the copying, editing, translation, storing, handling or reproduction of content.– Technical changes reserved –

Sub

ject

inde

x

KKentucky wringer . . . . . . . . . . . . . . . . . . 30

LLarge cleanrooms. . . . . . . . . . . . . . . . . . 43Leasing . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Lid . . . . . . . . . . . . . . . . . . . . . . . . . 65, 67Look behind the scenes . . . . . . . . . . . . . 73Low medium consumption. . . . . . . . . . . 20

MMaterial compatibility . . . . . . . . . . . . 14, 17Medium consumption . . . . . . . . . . . 20, 23Mimimum space requirement . . . . . . . . . . . . . . . . 25, 41, 44, 47, 51Mop CR for wall cleaning tool . . . . . . . . 85MopDrop . . . . . . . . . . . . . . . . . . . . . 36, 71MopFix . . . . . . . . . . . . . . . . . . . . . . . 23, 64MopFloat CR. . . . . . . . . . . . . 26, 47, 49, 64MopFloat GMP . . . . . . . . 26, 46 et seq., 64MopFloat GMP Operating sequence . . . 27MopFloat Disassembly . . . . . . . . . . . . . . 26Mop frame Aluminium mop frame . . . . . . . . . . 94 Mop frame Ergo EM . . . . . . . . . . . . 95 Mop frame Ergo FP. . . . . . . . . . . . . 95 Mop frame Trapez . . . . . . . . . . . 95, 99 Stainless steel inverse mop frame . 94 Stainless steel mop frame with Clino Connect . . . . . . . . . . . . . 94 Stainless steel mop frame with Clino Connect Lock . . . . . . . . . 94 Stainless steel mop frame with handle, one-piece . . . . . . . . . . 94 Stainless steel mop frame with stainless steel handle reception . . . 94 Stainless steel wall cleaning tool. . . 94 Stainless steel wire mop frame. . . . 94MopJump – contactless mop attachment. . . 21, 66Mop handles. . . . . . . . . . . . . . . . . . . . . . 95 Aluminium handles, short . . . . . . . . 95 Aluminium telescopic handle . . . . . 95 Aluminium telescopic handle, short 95 Stainless steel telescopic handle . . 95Mop MicroSicuro Trapez CR/A . . . . . 85, 99Mop preparation . . . . . . . . . . . . . . . . . . . 20Mop series, grey areas . . . . . . . . . . . . . . 90 King . . . . . . . . . . . . . . . . . . . . . . . . . 93 MicroKing . . . . . . . . . . . . . . . . . . . . 93 MicroMopp . . . . . . . . . . . . . . . . . . . 92 MicroMopp Plus . . . . . . . . . . . . . . . 92 MicroSicuro . . . . . . . . . . . . . . . . . . . 92 MicroSicuro Plus . . . . . . . . . . . . . . . 91 PPSC MicroTec . . . . . . . . . . . . . . . . 91Mop series, reusable . . . . . . . . . 80 et seq. King CR . . . . . . . . . . . . . . . . . . . . . . 81

King CR-MG. . . . . . . . . . . . . . . . . . . 82 King CR-MG Plus. . . . . . . . . . . . . . . 83 King GMP . . . . . . . . . . . . . . . . . . . . 81 Lord CR . . . . . . . . . . . . . . . . . . . . . . 82 MicroSicuro CR . . . . . . . . . . . . . . . . 84 MicroSicuro CR/A . . . . . . . . . . . . . . 83 MicroMopp Standard CR/A . . . . . . . 84Mop series, single-use . . . . . . . . . . . . . . 86 King CR Wiper mop. . . . . . . . . . . . . 87 King CR Wiper mop, sterile . . . . . . . 87 King CR Wiper mop PU. . . . . . . . . . 88 King CR Wiper mop S . . . . . . . . . . . 87 King CR Wiper mop S, sterile . . . . . 87MultiBox . . . . . . . . . . . . . . . . 39, 56, 60, 67Multifunctional holder ClinoLink . . . . . . . . . . . . 38, 62, 68, 69

NNordic Eco Label. . . . . . . . . . . . . . . . 17, 91

OObject-specific adjustments . . . . . . . 32, 38

PParticle emission . . . . . . . . . . . . . . . 14, 17Phone . . . . . . . . . . . . . +49 (0) 8 31 / 56 12 20Planning and consulting . . . . . . . . . . . . . . 7PlusBox. . . . . . . . . . . . . . 33, 67, 96 et seq.PPS System Cycle . . . . . . . . . . . . . . 14, 15Problem solver . . . . . . . . . . . . . . . . . . . . 99Production . . . . . . . . . . . . . . . . . . . . . . . . 9

QQuality . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Quick delivery . . . . . . . . . . . . . . . . . . . . . . 7QR-code Film Clino CR system . . . . . . . 29

RRange of applications . . . . . . . . . . . . 10, 11Readiness for delivery . . . . . . . . . . . . . . . 7Reliability . . . . . . . . . . . . . . . . . . . . . 15, 16Reliably avoid cross-contamination . . . 20, 26, 40, 46Removable disposal unit. . . . . . . . . . . . . 57Reproducibility . . . . . . . . . . . 15, 16, 20, 26Ringo GMP flat wringer . . . . . . . . . . . . . 28

SSafety . . . . . . . . . . . . . . . . . . 20, 26, 28, 32Self-explanatory operating sequences . . . . . . . . . . . . . . . . . . . 22, 24, 27, 29Service . . . . . . . . . . . . . . . . . . . . . . . . . 7, 9Single-stage . . . . . . . . . . 26, 28, 41 et seq.Single-use mops. . . . . . . . . . . . . . . . . . . 86Small areas . . . . . . . . . . . . . . . . . . . . . . . 23Social responsibility . . . . . . . . . . . . . . . . . 6

Space-saving solutions . . 25, 32, 41, 44, 47Spare parts guarantee . . . . . . . . . . . . . . . 9Squeegee . . . . . . . . . . . . . . . . . . . . 99, 100Sterile areas . . . . . . . . . . . . . . . . 23, 28, 32Sterility . . . . . . . . . . . . . . . . . . . . . . . 14, 16Storage of cleaning trolleys . . . . . . . . . . 25Support . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Surface cleaning . . . . . . . . . . 33, 96 et seq.Sustainability. . . . . . . . . . . . . . . . . . . 14, 17Swivel castors . . . . . . . . . . . . . . . . . . . . 70System boxes EasyMop GMP and CR . . . . . . . . . . . . . 20 et seq., 40 et seq.System cycle PPS – compose your individual cleaning and disinfection system . . . . . . . . . 14System solution . . . . . . . . . . . . . . . . . . . 14

TTested device . . . 16, 20, 22, 28, 81, 83, 87Textile preparation . . . . . . . . . . . . . . . 7, 14Three-bucket method . . . . . . . . . . . . . . . 30Time savings. . . . . . . . . . . . . . . . . . . . . . 14Training and continuing education . . . . . . 7Trolley components . . . . . . . . . . . . . . . . 62Two-stage method, bucket-sieve . . . . . . 30

VVacuum for cleanrooms Clino KR/A . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 et seq.Validatability . . . . . . . . . . . . . . . . . . . 15, 16

WWall and ceiling cleaning . . . . . . 61, 85 ,94Wiper programme CR Clino Carbon . . . . . . . . . . . . . . . . . . 97 Clino Glass wiper. . . . . . . . . . . . . . . 97 Clino One Way . . . . . . . . . . . . . . . . 98 Clino One Way Premium. . . . . . . . . 98 Clino One Way Professional . . . . . . 98 Clino Ultra CR . . . . . . . . . . . . . . . . . 97

Pfennig Reinigungstechnik GmbH

Heubachstrasse 1

D-87471 Durach

Phone: +49 (0) 8 31/ 56 12 20

Fax: +49 (0) 8 31/ 6 10 84

E-mail: [email protected]

Internet: www.pps-pfennig.de

Enviflex s.r.o.Riegrova 51 370 01 České Budějovice

+420 728 883 [email protected]

Autorizovaný prodejce pro ČR

Documents

Cleaning and disinfection systems for cleanrooms · 2019. 9. 20. · PPS Cleanroom PPS Hospital Expertise in the health care industry Hygienic cleanliness and efﬁciently designed,