1
CLD-100 HALOGEN LEAK DETECTOR Instruction manual General Information Incorporated with advanced leak detection technology, CLD-100 is Detect all kinds of halogen refrigerants an ideal and economic halogen leak detector.Compact in appearance, it is stable and easy to operate. Sensitivity can be adjusted at any time and the detector can be adjusted automatically to the best state of detection. Inner precise IC with ultra-low circuit consumption offers more stable function and lengthens battery life. Two-color visual display of battery voltage. Excellent sensor brings high sensitivity and longer service time. General Information Detection Range Battery lndicator The forepart light of panel indicates the leak and the battery voltage. GREEN Battery voltage is normal, sufcient for proper operation. ORANGE Battery voltage is approaching the lower threshold for operation. Replace them as soon as possible. storage/recovery containers.It will respond to all halogenated (includ The CLD-100 may also be used to detect leaks in other systems and ing Chlorine and Fluorine) refrigerants. This includes but not limited to: CFCs e.g.R12,R11,R500,R503 etc. HCFCs e.g.R22,R123,R124,R502 etc. HFCs e.g.R134a,R404a,R125 etc. Blends such as AZ-50, HP62, MP39 etc. Detect Ethylene Oxide gas leaks in hospital sterilizing equipment (it will detect the halogenated carrier gas). Detect SF-6 in high voltage circuit breakers. Detect most gases that contain chlorine, Fluorine and Bromine(ha logen gases). Detect cleaning agents used in dry cleaning applications such as perchloroethylene. Detect halogen gases in re-extinguishing system. Operating temperature: Maximum sensitivity: Battery life: Response time: Work mode: Fixed probe length: Dimensions: Warm-up time: Reset time: Power supply: 0to 52(30to 125) 6 gr/yr, for all halogenated refrigerants approximately 20 hours in normal use. nstantaneous. continuous, no limitation. 20cm. 22.9cm x 6.5cm x 6.5cm. approximately 6 seconds. 2-10 seconds. 6V DC, four AAA excellent batteries. Sensing tip Flexible probe Indicator light Buzzer Power on/off and sensitivity adjusting faucet Battery compartment Shell Structure

CLD 100 HALOGEN LEAK DETECTOR Instruction manualInstruction manual General Information Incorporated with advanced leak detection technology, CLD-100 is Detect all kinds of halogen

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: CLD 100 HALOGEN LEAK DETECTOR Instruction manualInstruction manual General Information Incorporated with advanced leak detection technology, CLD-100 is Detect all kinds of halogen

CLD-100

HALOGEN LEAK DETECTOR

Instruction manual

General Information

Incorporated with advanced leak detection technology, CLD-100 is

Detect all kinds of halogen refrigerants

an ideal and economic halogen leak detector.Compact in appearance, it is stable and easy to operate.

Sensitivity can be adjusted at any time and the detector can be adjusted automatically to the best state of detection.Inner precise IC with ultra-low circuit consumption offers more stable function and lengthens battery life.Two-color visual display of battery voltage.Excellent sensor brings high sensitivity and longer service time.

General Information

Detection Range

Battery lndicator

The forepart light of panel indicates the leak and the battery voltage.GREEN Battery voltage is normal, sufcient for proper operation.ORANGE Battery voltage is approaching the lower threshold for operation.Replace them as soon as possible.

storage/recovery containers.It will respond to all halogenated (includThe CLD-100 may also be used to detect leaks in other systems and

ing Chlorine and Fluorine) refrigerants. This includes but not limited to:

CFCs e.g.R12,R11,R500,R503 etc. HCFCs e.g.R22,R123,R124,R502 etc. HFCs e.g.R134a,R404a,R125 etc. Blends such as AZ-50, HP62, MP39 etc.

Detect Ethylene Oxide gas leaks in hospital sterilizing equipment(it will detect the halogenated carrier gas).Detect SF-6 in high voltage circuit breakers.Detect most gases that contain chlorine, Fluorine and Bromine(halogen gases).Detect cleaning agents used in dry cleaning applications such as perchloroethylene.Detect halogen gases in re-extinguishing system.

Operating temperature: Maximum sensitivity: Battery life: Response time: Work mode: Fixed probe length: Dimensions: Warm-up time: Reset time: Power supply:

0℃ to 52℃(30℉ to 125℉)6 gr/yr, for all halogenated refrigerantsapproximately 20 hours in normal use.nstantaneous.continuous, no limitation.20cm.22.9cm x 6.5cm x 6.5cm.approximately 6 seconds.2-10 seconds.6V DC, four AAA excellent batteries.

Sensing tip

Flexible probe

Indicator light

Buzzer

Power on/off and sensitivity adjusting faucet

Battery compartment

Shell

Structure