Page 1 of 6

Chino Valley Unified School District

Scope of Work for

Classroom Preparation for ViewSonics Group 1

Contractors Class A & B Engineer’s Estimate: $95,000.00 Contractor Duration: 90 calendar days This project will cover five (5) school sites (Country Springs ES, Litel ES, Oak Ridge ES, Canyon Hills JHS and Townsend JHS) for a total of 39 classrooms. The successful contractor shall supply all labor, materials, services, insurance, and equipment necessary to complete the work. The Contractor shall thoroughly investigate the premises for a complete understanding of the scope of work required for this bid.

• Remove whiteboards from front of classrooms. Protect the whiteboards for re-installation. Re-install whiteboards on either side of new ViewSonic monitors. If the whiteboards are not usable for re-installation, District will furnish new whiteboards for contractor to install. The minimum distance between the whiteboards is 76”.

• Remove any smart boards and ceiling/wall mounted projectors from the rooms. Remove old steel TV stand backing plates. Contractor must deliver these items to the Maintenance Department after removal. Replace damaged ceiling tiles with District provided tiles/patch and paint walls where ceiling/wall mounted projects were located.

• Install new 3' x 2' plywood mounting board. Plywood to be good one side (G1S), 3/4" thick, routed round edges, sanded smooth from splinting, prime and painted to match the existing wall. Attach plywood to walls with 6 lag bolts attached to the wall studs. The lag bolts to be 3/8” x 4” and be used with a regular washer and split/lock washer.

• Install new electrical outlet and data box for the monitor. Mount boxes adjacent to the backer board, but not to interfere with the mount or movement of ViewSonic monitor. Power to be connected to a usable circuit above the ceiling. Run conductors in wall when available, otherwise surface mount the pathway using wire mold. Please reference the attached list of District standards for electrical, data, and wire molding materials.

• Repair any holes in vinyl tack board or drywall caused from scope of work. Any damaged ceiling tiles or vinyl tack board need to be replaced with District standard material.

• District will determine the front orientation of each classroom. • Clean and leave classroom free of dust and construction debris and ready for classes the

following day. Contractor is responsible for covering/protecting all furniture in the rooms while work is taking place.

• Awarded contractor will be responsible for the removal and disposable of construction debris. • All work needs to be completed after hours and/or weekends. Awarded contractor will be

supplied school calendars for each site relating to holiday, early releases, etc.

Page 2 of 6

District Standard Specifications: o Attached are specification sheets for the adjustable mount placements for the specific

school sites (elementary and junior/high schools). o Electrical materials:

Legrand V700 wiremold Hubbell Stainless Steel Receptacle Cover 20Amp Receptable Legrand V5747 Single Gang Device box 1 3/8” deep.

o Data materials: Panduit - 24 port shielded modular patch panel (CP24WSBLY) Panduit - 48 port shielded modular patch panel (CP48WSBLY) Panduit - Single CAT6A keystone jacks (CJ6X88TGBU) Panduit - Mini-Com 2 port Faceplate (CFPE2IWY) Panduit - Surface Raceway Low Voltage Junction Box, White (JBX3510WH-A) Panduit - Pan-Way Low Voltage Channel (LD3WH10-A)

Page 3 of 6

Country Springs ES o Total of 5 classrooms (Rooms: 29, 30, 31, 32, 33) o Room 29 – Needs to change out one (1) of the 8ft whiteboards to new 4ft whiteboard to

avoid wire mold at right side. Below is a photo as reference. Litel ES

o Total of 6 classrooms (Rooms: 29, 30, 31, 32, 33, 34) o Room 31 – removal of existing television and mounting equipment. Below is a photo as

reference.

Page 4 of 6

Oak Ridge ES o Total of 9 classrooms (Rooms: 29, 30, 31, 32, 33, 34, 35, 36, 37) o Room 30 – Needs to change out one (1) of the 8ft whiteboards to new 4ft whiteboard to

avoid wire mold at right side. Below is a photo as reference.

o Room 31 – Install at old television location. Below is a photo as reference.

o Room 32 – Remove empty wire mold from walls (next to flag) to make room for

whiteboards. Below is a photo as reference.

Page 5 of 6

Canyon Hills JHS o Total of 13 classrooms (Rooms:501, 502, 503, 504, 505, 506, 507, 508, 509, 510, 511,

512, 513) o Rooms 501,502,503, 504, 505, 506, 508, 509 – need to change out 8ft whiteboards to

4ft whiteboards on both sides of the ViewSonic. Below is a photo of room 503 as reference.

o Room 507 – remove and reinstall ViewSonic to specifications listed in scope of work. Whiteboards can remain in place. Below is a photo as reference.

Page 6 of 6

Townsend JHS o Total of 6 classrooms (Rooms: 413, 415, 416, 417, 418, 419) o Room 415 – Remove 16ft whiteboard. Install 4ft whiteboards on both sides of the

ViewSonic. Please note front of classroom is at projector side south. Below is a photo as reference.

o Room 419 – Needs to change out one (1) of the 8ft whiteboards to new 4ft whiteboard

Catherine Sawyer

Polygon

NO

PA

RKIN

G

NO

PA

RKIN

G

NO

PA

RKIN

G

X

X

X

XX

XX

X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

XX

X

XX

X

X

5/20/2016

1612200

#

11" = 30'-0"OVERALL SITE PLAN - NEW

MARK HARDWARESIZE KEYNOTESV/P E/N

SW = SWING

PR = PAIR

SGL = SINGLE

N = NEW

E = EXISTING

V = VECHICULAR

P = PEDESTRIAN

GATE SCHEDULE KEYNOTES:

LOCKABLE GATE WITH A KNOX BOX

TUBE STEEL GATE REFER X/X

ALL TUBE STEEL GATES ARE TO BE BUILT WITH SQUARE OR RECTANGULAR POSTS.

ALL CHAIN LINK GATES ARE TO BE BUILT WITH ROUND POSTS

TYPE

FOR ACCESSIBLE HARDWARE SEE CHAIN LINK FENCE SPECS FOR ACCESSIBLE GATES

SITE GATE SCHEDULE

XX

XXXXX

SITE GENERAL NOTES - NEW

X

X

X

X

X

X

XX

XX

XX

XX

XX

XX

XX

XX

XX

XX

XX

XX

XX

XX

X X X X X X X

X

X

XX

X

X X X X X X

XX

X

XX

X

XX

XX

5/20/2016

1611800

#

11" = 30'-0"OVERALL SITE PLAN - NEW

SITE GENERAL NOTES - NEW

MARK HARDWARESIZE KEYNOTESV/P E/N

SW = SWING

PR = PAIR

SGL = SINGLE

N = NEW

E = EXISTING

V = VECHICULAR

P = PEDESTRIAN

GATE SCHEDULE KEYNOTES:

LOCKABLE GATE WITH A KNOX BOX

TUBE STEEL GATE REFER X/X

ALL TUBE STEEL GATES ARE TO BE BUILT WITH SQUARE OR RECTANGULAR POSTS.

ALL CHAIN LINK GATES ARE TO BE BUILT WITH ROUND POSTS

TYPE

FOR ACCESSIBLE HARDWARE SEE CHAIN LINK FENCE SPECS FOR ACCESSIBLE GATES

SITE GATE SCHEDULE

DistributionPhuc Tran, WLC Architects, Inc.

4' HI MARKERBOARD

TV

LOWWALL

30"

73"TOP OF TV MOUNT

4' HI MARKERBOARD27"

60"DATA/POWER

12"

4"

CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 05.19.21

30"

CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 05.19.21

(E) WD STUD PARTITION WALL

M M M ‘ M: wB

1(N) 2 x 6 STUD-

6'-0" FURRED WALLTV MOUNT &

TV, NIC-5=-

TOP OF WALL

n4 x BLOCKING- REF DET 22/9.1

2

1TV MOUNT & TV,-\REF DET 22/9.1 .

(E) WD STUD PARTITION WALL(N) (2)2x6 CONT TOP PLATE(N) 2x4 BRACE @ 32" OC W/ (3}-10d ATEAEND

u33"4"

NK5/8" GYP BD-----

(N) 2x6 WD STUDS @ 16" OC (ALIGN NEW STUDS W/(E) STUDS TYP) FURRING

HITI LOW-VELOCITY POWER DRIVEN FASTNER 0.138" DIA TYPE X-CW/1" EMBEDMENT TO CONCRETE AT 24” OC W/14 GA WASHERS(ICC-ES ESR-1663)

WOOD STUD WALLFILE/CSI NUMBHC XD11-002 REVISION DATE: JOB NUMBER: 1621600

FURRED WALL @ TV 10N.T.S.

27"

CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 05.19.21

(N)f GYPSUM BOARD(N) 4x WOOD STUD BLOCKINGATTACHED W/ SIMPSON A35

(E) WD STUD PARTITION WALL

)

\

Jr

ADJUSTABLE WALL MOUNT,NIC

o

1ih

OLL

t>

TV MONITOR,NIC

W/P 9

)

MOUNTING BRACKETS, NIC

+3'-0" A.F.F.NOTE:MOUNTING HEIGHT OF TV TO BE THE SAME IN ALL WALL CONDITIONS. REFER TO DETAIL 10/- FORFURRED WALL BELOW

FILE/CSI NUMBER: XD11-002 JOB NUMBER: 1621600REVISION DATE:

9TV MOUNT DETAIL N.T.S.

47.25" AFF

50.25" AFF

71.5" AFF

73.0" AFF

CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 05.19.21

8/23/2019 ViewSonic IFP7550 75 Interactive ViewBoard

https://www.viewsonic.com/us/catalog/product_datasheet/view/key/ifp7550.html 1/2

INTERACTIVE DISPLAY

IFP7550

Key FeaturesEnhanced Touchscreen Performance | Immersive Stereo Sound |

myViewBoard™ Annotation Software | ViewBoard Cast Content Sharing

Software | SmartPort USB™

Product DescriptionFeaturing 4K Ultra HD resolution and an advanced, next-generation touchscreen, the ViewSonic ViewBoard IFP7550 delivers incredible collaborative capabilities for 21st century boardrooms and

classrooms. With integrated myViewBoard annotation software and ViewBoard Cast streaming software, content creation and sharing has never been easier. What’s more, this ENERGY STAR certified

display delivers optional slot-in PC capability for more computing-intensive interactive applications. A VESA-compatible design allows for installation on a wall mount, or on an optional trolley cart for

more flexible installation in classrooms and meeting rooms.

Menu Contro lsUSB 2 .0 x3VESA® Compat ib le Wal lMount (800 x 400 mm)HDMI 2 .0 I nHDMI Out

USB 2 .0USB B Touch Por t x2VGA I nAudio I nHDMI 2 .0 I n x2Camera Por t

USB 3 .0Composi te RCA Video I nAudio OutEthernet Lan (RJ45)RS232SPDIF

75"DISPLAY

RESOLUTION 20-PointTOUCH INTERACTIVE

Contact Salescall: 888.881.8781

email: salesinfo@viewsonic.com

visit: viewsonic.com

® ®

®

VIEWSONIC DISPLAY

CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 05.19.21

8/23/2019 ViewSonic IFP7550 75 Interactive ViewBoard

https://www.viewsonic.com/us/catalog/product_datasheet/view/key/ifp7550.html 2/2

Display:Display Size (in.): 75

Viewable Area (in.): 74.5

Light Source: LED

Resolution: 3840 x 2160

Aspect Ratio: 16:9

Static Contrast Ratio: 1,200:1

Backlight Life (Hours): 50,000

Brightness: 350 cd/m2

Response Time ( Typical GTG): 8ms

Viewing Angles: 178º horizontal, 178º vertical

Panel Surface: Anti-glare 7H tempered glass

Networking:Ethernet LAN: 10/100/1000 Mbps

Embedded Player:Android Version: 7.0

GPU: ARM Mali450 Quad Core

CPU: ARM Dual Core Cortex A73

CPU Processor Speed: 1.2GHz

Memory: 2GB

Storage: 16GB

Interface: OSD / Remote Control / Annotation overlay

Audio:Internal Speakers: 10W (x2)

Subwoofer: 15W (x1)

Connector:HDMI 2.0(3), HDMI Out(1), VGA(1), Composite RCA(1), 3.5mm Audio In(1), 3.5mm Audio Out(1), SPDIFAudio Out(1), USB 3.0(2), USB 2.0(4), Slot-in PC Slot(1), USB B Touch Port(2), RS232(1), Ethernet LAN(RJ45)(1), WIFI Module Slot(1)

Power:Voltage: 100-240 VAC

Consumption (typical): 350W

Stand-by: <0.5W

Controls:On Screen Display: Input, Volume, Backlight, Audio, Screen, Display, Adjust

Remote Control: Volume, Channel, Source, Mute, Back, Input, Menu

Operating Conditions:Temperature: 32-104º F (0 - 40º C)

Humidity (non-condensing): 10-90%

Touch:Touch Technology: Infrared

Touch Points: 20-Point Touch

Tip Detection: Dual tips, 3mm and 8mm

Weight (metric):Net (kg): 53.0

Gross (kg): 65.0

Weight (imperial):Net (lbs): 116.8

Gross (lbs): 143.3

Dimensions (metric) (WxHxD):Packaging (mm): 1930.0 x 1140.0 x 280.0

Physical (mm): 1710.0 x 1020.0 x 90.0

Dimensions (imperial) (WxHxD):Packaging (in.): 76.0 x 44.9 x 11.0

Physical (in.): 67.3 x 40.2 x 3.5

Mount:VESA Compatible: 800 x 400 mm

Additional Hardware:Camera Mounting Bracket: 1

General:Warranty: 3-year limited warranty on parts, labor and backlight, onsite warranty

Recycle/Disposal: Please dispose of in accordance with local, state or federal laws.

PACKAGE CONTENTS: IFP7550 display, stylus pen x 2, power cable, HDMI cable, USB cable, AV cable,remote control with batteries, Camera plate, M8 screw x 8, Quick Start Guide

Regulations: cTUVus, FCC, ENERGY STAR, Mexico Energy, CE, CB, RoHS, ErP, WEEE

UPC: 766907901610

Accessories:Intel Unite, LB-PEN-002, LB-WIFI-001, NMP660, PD-IFP-001, PD-IFP-002, PD-IFP-003, PD-IFP-004, STND-047, SW-071, SW-072, SW-072-2, SW-073, SW-073-2, SW-074, SW-074-2, SW-075, SW-075-2, SW-101,SW-UP-117, VB-BLF-001, VB-BLF-002, VB-BLF-003, VB-BLM-001, VB-BLM-002, VB-BLM-003, VB-BLW-001,VB-BLW-002, VB-BLW-003, VB-CAM-001, VB-EBL-001, VB-EBM-001, VB-EBS-001, VB-EBT-001, VB-EBV-001,VB-EBV-002, VB-EBW-001, VB-STND-001, VB-STND-002, VB-STND-003, VB-STND-004, VB-VIS-001, VB-WKB-001, VBD100, VBH100, VBS100, VPC10-WP-2, VPC10-WP-4, VPC10-WP-8, VPC14-WP-2, VPC14-WP-4,VPC15-WP-4, VPC15-WP-6, VPC16-WP-4, VPC17-WP-6, WMK-047-2

Awards:

Copyright © ViewSonic Corporation 2000-2019. All rights reserved. (08/23/2019 07:26 AM PST)

VIEWSONIC DISPLAY

CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 05.19.21

https://www.viewsonic.com/in/products/viewboard/IFP7550.php

VIEWSONIC DISPLAYCVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 05.19.21

ADJUSTABLE DISPLAY MOUNT

CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 05.19.21

DistributionPhuc Tran, WLC Architects, Inc.

4' HI MARKERBOARD

TV

LOWWALL

DATA/POWER

12"

4"

CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 06.01.21

(N)f GYPSUM BOARD(N) 4x WOOD STUD BLOCKINGATTACHED W/ SIMPSON A35

(E) WD STUD PARTITION WALL

)

\

Jr

ADJUSTABLE WALL MOUNT,NIC

o

1ih

OLL

t>

TV MONITOR,NIC

W/P 9

)

MOUNTING BRACKETS, NIC

+3'-0" A.F.F.NOTE:MOUNTING HEIGHT OF TV TO BE THE SAME IN ALL WALL CONDITIONS. REFER TO DETAIL 10/- FORFURRED WALL BELOW

FILE/CSI NUMBER: XD11-002 JOB NUMBER: 1621600REVISION DATE:

9TV MOUNT DETAIL N.T.S.

47.25" AFF

50.25" AFF

71.5" AFF

73.0" AFF

CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 06.01.21

8/23/2019 ViewSonic IFP7550 75 Interactive ViewBoard

https://www.viewsonic.com/us/catalog/product_datasheet/view/key/ifp7550.html 1/2

INTERACTIVE DISPLAY

IFP7550

Key FeaturesEnhanced Touchscreen Performance | Immersive Stereo Sound |

myViewBoard™ Annotation Software | ViewBoard Cast Content Sharing

Software | SmartPort USB™

Product DescriptionFeaturing 4K Ultra HD resolution and an advanced, next-generation touchscreen, the ViewSonic ViewBoard IFP7550 delivers incredible collaborative capabilities for 21st century boardrooms and

classrooms. With integrated myViewBoard annotation software and ViewBoard Cast streaming software, content creation and sharing has never been easier. What’s more, this ENERGY STAR certified

display delivers optional slot-in PC capability for more computing-intensive interactive applications. A VESA-compatible design allows for installation on a wall mount, or on an optional trolley cart for

more flexible installation in classrooms and meeting rooms.

Menu Contro lsUSB 2 .0 x3VESA® Compat ib le Wal lMount (800 x 400 mm)HDMI 2 .0 I nHDMI Out

USB 2 .0USB B Touch Por t x2VGA I nAudio I nHDMI 2 .0 I n x2Camera Por t

USB 3 .0Composi te RCA Video I nAudio OutEthernet Lan (RJ45)RS232SPDIF

75"DISPLAY

RESOLUTION 20-PointTOUCH INTERACTIVE

Contact Salescall: 888.881.8781

email: salesinfo@viewsonic.com

visit: viewsonic.com

® ®

®

VIEWSONIC DISPLAY

CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 06.01.21

8/23/2019 ViewSonic IFP7550 75 Interactive ViewBoard

https://www.viewsonic.com/us/catalog/product_datasheet/view/key/ifp7550.html 2/2

Display:Display Size (in.): 75

Viewable Area (in.): 74.5

Light Source: LED

Resolution: 3840 x 2160

Aspect Ratio: 16:9

Static Contrast Ratio: 1,200:1

Backlight Life (Hours): 50,000

Brightness: 350 cd/m2

Response Time ( Typical GTG): 8ms

Viewing Angles: 178º horizontal, 178º vertical

Panel Surface: Anti-glare 7H tempered glass

Networking:Ethernet LAN: 10/100/1000 Mbps

Embedded Player:Android Version: 7.0

GPU: ARM Mali450 Quad Core

CPU: ARM Dual Core Cortex A73

CPU Processor Speed: 1.2GHz

Memory: 2GB

Storage: 16GB

Interface: OSD / Remote Control / Annotation overlay

Audio:Internal Speakers: 10W (x2)

Subwoofer: 15W (x1)

Connector:HDMI 2.0(3), HDMI Out(1), VGA(1), Composite RCA(1), 3.5mm Audio In(1), 3.5mm Audio Out(1), SPDIFAudio Out(1), USB 3.0(2), USB 2.0(4), Slot-in PC Slot(1), USB B Touch Port(2), RS232(1), Ethernet LAN(RJ45)(1), WIFI Module Slot(1)

Power:Voltage: 100-240 VAC

Consumption (typical): 350W

Stand-by: <0.5W

Controls:On Screen Display: Input, Volume, Backlight, Audio, Screen, Display, Adjust

Remote Control: Volume, Channel, Source, Mute, Back, Input, Menu

Operating Conditions:Temperature: 32-104º F (0 - 40º C)

Humidity (non-condensing): 10-90%

Touch:Touch Technology: Infrared

Touch Points: 20-Point Touch

Tip Detection: Dual tips, 3mm and 8mm

Weight (metric):Net (kg): 53.0

Gross (kg): 65.0

Weight (imperial):Net (lbs): 116.8

Gross (lbs): 143.3

Dimensions (metric) (WxHxD):Packaging (mm): 1930.0 x 1140.0 x 280.0

Physical (mm): 1710.0 x 1020.0 x 90.0

Dimensions (imperial) (WxHxD):Packaging (in.): 76.0 x 44.9 x 11.0

Physical (in.): 67.3 x 40.2 x 3.5

Mount:VESA Compatible: 800 x 400 mm

Additional Hardware:Camera Mounting Bracket: 1

General:Warranty: 3-year limited warranty on parts, labor and backlight, onsite warranty

Recycle/Disposal: Please dispose of in accordance with local, state or federal laws.

PACKAGE CONTENTS: IFP7550 display, stylus pen x 2, power cable, HDMI cable, USB cable, AV cable,remote control with batteries, Camera plate, M8 screw x 8, Quick Start Guide

Regulations: cTUVus, FCC, ENERGY STAR, Mexico Energy, CE, CB, RoHS, ErP, WEEE

UPC: 766907901610

Accessories:Intel Unite, LB-PEN-002, LB-WIFI-001, NMP660, PD-IFP-001, PD-IFP-002, PD-IFP-003, PD-IFP-004, STND-047, SW-071, SW-072, SW-072-2, SW-073, SW-073-2, SW-074, SW-074-2, SW-075, SW-075-2, SW-101,SW-UP-117, VB-BLF-001, VB-BLF-002, VB-BLF-003, VB-BLM-001, VB-BLM-002, VB-BLM-003, VB-BLW-001,VB-BLW-002, VB-BLW-003, VB-CAM-001, VB-EBL-001, VB-EBM-001, VB-EBS-001, VB-EBT-001, VB-EBV-001,VB-EBV-002, VB-EBW-001, VB-STND-001, VB-STND-002, VB-STND-003, VB-STND-004, VB-VIS-001, VB-WKB-001, VBD100, VBH100, VBS100, VPC10-WP-2, VPC10-WP-4, VPC10-WP-8, VPC14-WP-2, VPC14-WP-4,VPC15-WP-4, VPC15-WP-6, VPC16-WP-4, VPC17-WP-6, WMK-047-2

Awards:

Copyright © ViewSonic Corporation 2000-2019. All rights reserved. (08/23/2019 07:26 AM PST)

VIEWSONIC DISPLAY

CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 06.01.21

https://www.viewsonic.com/in/products/viewboard/IFP7550.php

VIEWSONIC DISPLAYCVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 06.01.21

ADJUSTABLE DISPLAY MOUNT

CVUSD TEACHING WALL - ADJUSTABLE MOUNT UPDATED 06.01.21