Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Dat
a sh
eet t
k-B
C10
0, R
ev.0
, 10
-201
9
Competence in ValvesMaterials Services | Materials Germany
Stainless Steel Ball Valve Classic Line Series, 1-piece (tk-BC100)
Technical specifications
Design1-piece, maintenance-free, reduced bore
Features• Blow-out-proof stem• Lockable lever in OPEN and CLOSED positions
OperationLever, turnable 90° (displaceable 90° against thestem)
ConnectionInternal thread acc. to DIN EN 10226 (DIN 2999)
Dimensions Dimension Table
Operating parametersOperating temperature -20 °C to +200 °CPressure rating PN63
Pressure-Temperature Diagram
MaterialsBody: Stainless steel 1.4408Ball: Stainless steel 1.4408Seats: PTFEStem seal: PTFELever: Stainless steel 1.4301 with plastic sleeve
All information is non-binding!
→
Materials Services | Materials Germany | Stainless Steel Ball Valve | tk-BC100 2
Dimensions in mm
NPS DN d L H W
Breakaway
Torque [Nm]
Weight
[kg]
Kv value
[m³/h]
1/4" 8 5 40 32 78 6,5 0,1 3
3/8" 10 7 44 34 80 6,5 0,1 7
1/2" 15 9 53 40 92 7,8 0,1 11
3/4" 20 12 57 43 95 7,8 0,2 21
1" 25 15 68 47 110 10,4 0,3 34
1 1/4" 32 20 76 53 130 15,6 0,5 62
1 1/2" 40 25 81 57 145 19,5 0,6 99
2" 50 32 94 63 150 26,0 0,9 170
1/4"–2"
1 1/2"–2" Hollow ball
Dat
a sh
eet t
k-B
C10
0, R
ev.0
, 10
-201
9
Pos. Parts Material
1 Body 1.4408
2 Retainer 1.4408
3 Ball AISI 316
4 Gasket AISI 316
5 Seat PTFE
6 Stem AISI 316
7 Thrust Washer PTFE
8 Packing PTFE
9 Gland AISI 304
10 Washer Stainless Steel
11 Lever 1.4301
12 Nut A2-70
13 Locking Device AISI 201
14 Sleeve PVC
Parts List
T [°C]
T [°F]
P [bar]P
[PS
I]
Contactthyssenkrupp Schulte GmbH Subsidiary Das ArmaturenzentrumArtur-Ladebeck-Str. 11433647 BielefeldT: +49 521 1451-208 [email protected] www.dasarmaturenzentrum.de
Pressure-Temperature Diagram
Materials Services | Materials Germany | Stainless Steel Ball Valve | tk-BC100 3
Note:Operation of the valve is only recommended in the area below the pressure-temperature curve and above the saturated steam curve in the diagram above. In case of deviating requirements, do not hesitate to contact us.
The valves described in this document, in the form we have supplied, are neither machines in accordance with Article 2 paragraph a nor incomplete machines according to Article 2 paragraph g in the sense of the Machinery Directive 2006/42 / EC.
Dat
a sh
eet t
k-B
C10
0, R
ev.0
, 10
-201
9