Classic C2000 Collection - Clipsalupdates.clipsal.com/ClipsalOnlineNZ/Files/Brochures/ZA000004.pdf · The first thing you’ll notice about the C2000 Classic series is the cover comes

C2000®

Classic Collection

Smooth CurvesThe finest quality

The first thing you’ll notice about the C2000 Classic series is the cover

comes in a choice of superb metal finishes and classic coloured

plastic mouldings.

This cover not only looks attractive, it also hides all mounting holes, and

is easily removed to enable you to paint right up to the edge of the grid

plate without having to worry about marking the cover. When decorating

is complete, the cover is simply replaced for a perfect finish.

C2000 Classic series covers and grid plates can be mixed and matched

to produce a combination that matches the particular décor theme you

want to create.

In fact even after the C2000 Classic series has been installed, you can

change combinations as your décor changes.

Switches

A wide choice of C2000 Classic series switches are available for homes

and commercial premises, including one to six button standard wall

switches and one to four button architrave switches.

Sockets

With so much electrical equipment in our homes and offices, it’s good

to know that the C2000 Classic series has all your requirements covered with

a comprehensive range of sockets.

10A and 15A single and twin switched sockets in horizontal and vertical

configurations provide a number of options including neons and safety

shutters in single or double pole.

2

Data and Communication

Telephones, fax machines and the Internet are an everyday part of life,

not just in the office, but in the home too.

Having a home entertainment system has usually meant putting up with

metres of messy audio cables, but not anymore. The C2000 Classic

series includes wallplates that provide a neat connection point for the

audio cables of televisions, VCRs and sound systems via easily identified

red, yellow, white, orange or black RCA sockets.

Specialised Switches

A 45A cooking appliance isolating switch is also available in the C2000

Classic series. Installed a safe distance from electric hotplates, it enables

power to the hotplates to be completely shut off in the event of an

emergency such as oil catching fire.

Access, Card, Dimmers, Fanspeed and Key Tag switches are also

included in the range.

Specialised Switch Sockets

For added peace of mind, twin switched sockets are available with

built-in RCD protection, in both 30 and10mA.

Four gang switched sockets make life even easier in the home and office –

you’ll soon wonder how you ever managed without them.

A universal shaver outlet has also been included in the C2000 Classic

series for locations such as hotels, conference centres and airports.

All specialised switch sockets are available in horizontal only.

Painting Shields

Snap on painting shields for grid plates are also available (C2000PP).

These paint shields provide total protection of the grid plate when

painting with a brush, roller or spray-gun.

3

The C2000 Classic series consists of seven superb metal cover finishes. All simply clip onto the grid plates while the stainless steel and brass covers are also available in screw fixed formats for greater security in commercial areas.

Metal Finishes

Gold (GD)

Brushed Brass (BB)

Brushed Aluminium (BA)

Chrome (CH)

Gunmetal (GM)

Brass (BS)

Stainless Steel (SS)

Moulded Plastic Finishes

White Electric (WE)

Black (BK)

The Attraction of Metal

4

Brushed Brass (BB)

Chrome (CH)

Brass (BS)

Brushed Aluminium (BA)

Gun Metal (GM)

Stainless Steel (SS)

Gold (GD)

5

40/45A current carrying capacity

Cooker Switches

The C2000 series cooker switches feature a rocker style switch mechanism, with the single pole version boasting a 45A load rating.

If a cooktop and oven are needed in the same area, a single switch can

be used to protect them both. In addition to the single pole (45A 250V),

a double pole (40A 500V) for multiple phase applications is also available.

Both have the option of a neon indicator.

The new rocker style switch mechanism gives the cooker switch a much

more stylish appearance and ensures that it blends well with other C2000

series switches. It also has generously sized terminals that will easily

accept 3x6mm2 or 1x16mm2 cables.

The perfect companion for C2000 series cooker switches are the socket

and plug/lead products (31VCS and 800CL). Together they allow cooking

equipment to be installed just before the new owners arrive, to prevent

damage or theft while building and decorating are still in the progress.

800CL 31VCSNB: 31VCS available in Standard or 2000 Series (2031VCS) only

6

Schneider Electric is the first company in Australasia to offer practical four switched power sockets in great new metal look finishes. Our famous C2000 series ‘awesome foursome’ switched sockets now come in arctic silver and chrome shadow finishes which blend in seamlessly with modern or architectural settings.

Cool colours and features include:

Fingerprint, chemical, UV and corrosion resistant >

Arctic silver compliments the C2000 or Slimline SC2000 series >

‘Brushed Aluminium’ colour variant

Chrome shadow compliments existing Slimline SC2000 series >

‘chrome shadow’ colour variant

Double pole 10A, 250V a.c. (suitable for caravans and marine craft) >

Quad Sockets with Style

7

IP66 C2000 Classic SwitchesThe outstanding features and stylish good looks of the IP66 C2000 Classic switches make them the ideal choice for domestic, wet area installations.

A simple solution to the longstanding problem of using electricity near

water, the IP66 C2000 Classic switches are designed specifically for the

restricted zones of kitchens, bathrooms, laundries and other wet areas

where both safety and aesthetics are important.

Their hardwearing, UV stabilised, polycarbonate surface also makes

them suitable for a wide variety of outdoor areas, such as carports

and pergolas.

Ensured safety in wet areas.

There are four options in the C2000 Classic weatherproof range –

single through to 4 button switch.*

A unique waterproof membrane between the switch dolly and mechanism,

together with a low profile neoprene gasket ensures a consistent IP66 rating

when installed on a suitable surface.

These barriers guarantee safety when the switches are used with wet

hands or installed near sinks, basins, taps and shower areas.

*Three and four gang options available mid 2009

8

Double Pole for Safety and PerformanceSchneider Electric’s highly popular C2000 Classic series of switches and sockets are now available in a double pole range. Ideal for use in caravans, marine craft, motor homes, transportable buildings or anywhere installation safety is paramount. The double pole range is a great addition to the accessory offering.

Features and Benefits

Added safety >

Interchangeable covers – mix and match combinations to create your >

own theme

Neon options available (eg. C2025DN) >

Shutter options (eg. C2025DS) >

10A and 15A versions >

Standard metal decorative covers available (refer page 5) >

9

Disconnected

Connected

The Fastest Fit-Off in the World

Forget the slow process of stripping, twisting and screwing down conductors, Quick Connect cuts installation time in half. It’s ideal for volume users, as it saves time and greatly reduces human error, so call-backs and reconnections are almost eliminated.

Insert approximately 23mm of unstripped cable and click terminations >

down, it’s that easy!

Clear indication of correct termination is given >

Colour-coded sliders allow for easy identification of polarity >

Suits 1.5mm² and 2.5mm² cable >

Compatible with all C2000 Classic series accessories >

One conductor per terminal. Up to 4 active, Neutral and Earth per unit >

Complies with all relevant requirements of AS/NZS/3112 and >

AS/NZS/60998.2

250V ~ 10A rating >

Quick Connect

10

Lock-Jaw Cable Retention and ConnectionWhen Quick Connect’s slider mechanism is moved to the locked position it clamps the cable firmly. The contact connection is held firmly under high pressure due to the 45° angled contact tags, this guarantees cable retention in the toughest environments.

Cable Retention Cable Connection

Installation Cross Section1. Insertion of cables and positioning screwdriver

2. Levering slider to CONNECT and retain cables

3. Levering slider to LOCK and retain cable (slider cut away to show cable)

1 2 3

11

Personalised PlatesC2000 Classic series products are available with labelling windows so that switches and circuits can be instantly identified.

The clear window simply clips into the grid and the label is inserted.

A specially pierced cover is then clipped on to give you an

easy-to-read label.

These products are available fully assembled or as an ID cover kit

comprising the relevant pierced cover, the necessary transparent

windows, and some commonly used labels.

Simply add ‘I’ to the standard catalogue number.

1. Attach window

2. Insert label

3. Fit cover

4. Finished product

12

Custom Label Software ProgramThe labels supplied with the ID cover kit have been chosen to suit a number of everyday applications. However, circuit identification for major projects can be far more complex, often requiring hundreds of labels in many sequences.

Available free from www.clipsal.co.nz, the

C2000 label printer is a Windows™ based

custom software package that uses a very

simple data entry form and allows for multiples

of each label and multiples of consecutive

labels. Text colour selection is also available,

depending on the suitability of the printer.

The program includes a test page and setting

adjustment facility which allows for different

brands of printers.

The C2000 label printer ensures perfect labels

every time when printing on C2000 label sheets.

These sheets are available in packs containing

10 pages with over 400 labels per page. For

further flexibility, there is a choice of both

adhesive or non-adhesive versions.

While the C2000 label printer was designed for

the C2000 Classic series labelling system, it can

also be used for 30PID labels and the Slimline

SC2000 range.

13

> Push Button Mechanism

Push Button switching is not only the latest innovation in switch

operation, but also an easy to install retrofit solution.

The 30 series (30PB) push button mechanism will easily fit into all

standard C2000 Classic series wall plates.

The 30PB push button offers a new low profile look and feel and

provides a smooth and reliable action in preference to the standard

rocker switch.

The 30PB has a 20A/16AX capacity, comes with or without LED

indication and fits all 30 series apertures. (22mm holes)

> Rocker Switch Mechanism

The gentle curves and overall shape of the 30 series rocker switch

mechanism is equally proportioned to provide uncomplicated

symmetry.

It is this flexibility and strength of design that has enabled this switch

shape to remain in style since the 1960’s.

The 30 series can easily be converted from vertical to horizontal mounting

by removing the mechanism and turning it through 90°. Most switch

bases fit a 22mm diameter hole and have terminal bores of 4.1mm unless

specified otherwise.

Schneider Electric offers a broad range of labelled 30 series mechanisms

for easy identification when several switches are installed on the same

switchplate or when there is a chance of confusion over the load

controlled.

Specialised mechanisms are available; such as the 30RSM3, a 1, 2, 3,

Off rotary mechanism, or the 30TKM which has a removable key that allows

you to lock the mechanism On or Off.

30 Series Mechanisms

30M

30PB

30MI

30PBL

30RSM3

30TKM

30MBPR

14

A C-Thru™ Dimmer lets you adjust the lighting levels in any area, for any occasion.

For instance, you may want to add a little romance to an intimate dinner,

create the right mood for a movie, or leave just enough light to navigate

your way to the bathroom.

In commercial environments too, light dimmers have an almost endless

number of applications. Auditoriums, restaurants and boardrooms are just

a few of the possible locations in which a dimmer will offer you full control

of lighting to suit any occasion.

C-Thru™; The clear choice – helping you select the right dimmer, first time,

every time!

Feature

32e450LMLeading edge

diMMers

32e450tMtraiLing edge

diMMers

32e500FMFan speed

controLLer

32e450udMuniversaLdiMMers

Power Rating 450VA 450VA 500VA 450VA

Load Type Compatibility Medium Medium Medium HIGH

Resistive

Inductive

Capacitive

Small Motors

Short Circuit Protection

Derating Factor for Multigang Applications

25% (per additional

mech per plate)

25% (per additional

mech per plate)

25% (per additional

mech per plate)

25% (per additional

mech per plate)

Soft Start Feature

Voltage Stability

Frequency Stability

Immunity to Ripple Signal Injection

Over-current Compensation

Over-temperature Compensation

Thermal Shutdown

“Safe” in all modes operation

Dimmer product feature comparison chart

The Choice is Clear and Simple

15

*Available mid 2009

Switches – C2000 Classic Series

paint protectors

C2000 Classic series paint protectors C2000PP

FLusH switcHes

Switch 1 gang 250V 16A C2031VA16T

Switch 2 gang 250V 16A C2032VA16

Switch 3 gang 250V 16A C2033VA16

switcH grid pLates and covers

Grid and cover assembly blank C2031VX

Grid and cover assembly 1 gang less mech C2031VH






switcH grid pLates and covers witH identiFication Kits

Grid and cover assembly 1 gang less mech - vertical mount C2031VHI






FLusH switcH covers

Switch cover blank C2031VXC

Switch cover 1 gang C2031C






arcHitrave size – verticaL Mount

Switch 1 gang 250V 10A C2030

Switch 2 gang 250V 10A C2032A



arcHitrave switcH grid pLates & covers

Grid and cover assembly 1 gang less mech C2031




arcHitrave FLusH switcH covers





eLectric range switcHes

250V 45A single pole C2031/45

250V 45A single pole with neon C2031/45N

500V 40A double pole C2031D40

250V 45A double pole with neon C2031D40N

eLectric range switcH cover

Cooker switch cover suit 40 & 45A ranges C2031/45C

perManent connection unit

10A permanent connection unit C2032VTB

teLepHone connection outLet pLate and cover

1 Gang telephone outlet – 2 wire (telepermitted) C2031VT2W

2 Gang telephone outlet – 2 wire (telepermitted) C2032VT2W

teLepHone connection outLet cover

1 Gang telephone outlet – 2 wire cover only C2031VT2WC

2 Gang telephone outlet – 2 wire cover only C2032VT2WC

tv antenna connection accessories

TV antenna socket plate and cover 75 Ohm C2031VTV75

access card operated switcHes

250V 10A switch to suit 1 x 16A circuit C2033CC1

FLusH switcHes, ip66 rated

Switch 1 gang 250V 10A – vertical mount C2031V66

Switch 2 gang 250V 10A - vertical mount C2032V66

Switch 3 gang 250V 10A - vertical mount C2033V66*

Switch 4 gang 250V 10A - vertical mount C2034V66*

16

FLusH switcH verticaL Mount

Image cat no. LengtH WIDtH DePtH moUntIng centReS

c2031Va16t

c2031Va16t

116mm 76mm 30mm 84mm

c2032Va16

c2033Va16

c2031V66

c2032V66

c2033V66

c2034V66

c2032VtB

c2031Vt2W

c2032Vt2W

c2031VtV75

switcH grid pLates and covers

c2033VH

c2031VX


c2031VH*

c2032VH*

c2033VH*

c2034VH*

c2035VH*

c2036VH*

switcH grid pLates and covers witH identiFication Kits

c2031VHI*

c2031VHI*


c2032VHI*

c2033VHI*

c2034VHI*

c2035VHI*

c2036VHI*

arcHitrave series

c2030

c203075mm 32mm

30mm55mm

c2031* 11mm

c2032a86mm 34mm

30mm70mm

c2032* 11mm

c2033a

141mm 35mm

30mm

122mmc2033* 11mm

c2034a 30mm

c2034* 11mm

range switcHes

c2031/45

c2031/45

116mm 76mm 30mm 84mmc2031/45n

c2031D40

c2031D40n

access card switcHes

c2033cc1

c2033cc1


c2033cc1n

c2033cc1X

c2033cc1nX

c2033cc2

c2033cc2X

*sold less mechanisms

17

Socket outlets – C2000 Classic Series

singLe – verticaL Mount

Power outlet single 250V 10A – safety shutter C2015V

Power outlet single 250V 15A C2015V15

Power outlet single 250V 10A with shutters and extra removable switch C2015VXA

singLe - HorizontaL Mount

Power outlet single 250V 10A C2015

Power outlet single 250V 10A – suit lighting C2015L

Power outlet single 250V 10A with shutter C2015S

Power outlet single 250V 15A C2015/15

Power outlet single 250V 20A C2015/20

Power outlet single 250V 10A with extra switch C2015X

Power outlet single 250V 10A with shutters and extra switch C2015XS

Power outlet single 250V 10A with two extra switches C2015XX

twin – verticaL Mount

Power outlet double 250V 10A with safety shutters C2025V

Power outlet double 250V 10A with extra switch with shutters C2025VXA

Power outlet double 250V 15A with shutters C2025V15

Power outlet double 250V 10A with double base 2015/2VS*

twin – HorizontaL Mount

Power outlet double 250V 10A C2025

Power outlet double 250V 10A – suit lighting C2025L

Power outlet double 250V 10A with neons C2025N

Power outlet double 250V 10A with shutters C2025S

Power outlet double 250V 15A C2025/15

Power outlet double 250V 15A with shutters C2025/15S

Power outlet double 250V 10A – quick connect C2025QC

Power outlet double 250V 10A with extra switch C2025XA

Power outlet double 250V 10A with shutters and extra switch C2025XAS

twin arcHitrave

Power outlet double 250V 10A C2016/2

Power outlet double 250V 10A double pole C2016/2D

Four gang – doubLe poLe – HorizontaL Mount

Power outlet 4 gang 250V 10A C2015D4

cHroMe sHadow Four gang - doubLe poLe - HorizontaL Mount

Power outlet 4 gang 250V 10A C2015D4,3S

Power outlet 4 gang 250V 10A with neons C2015D4N,3S

arctic siLver Four gang – doubLe poLe – HorizontaL Mount

Power outlet 4 gang 250V 10A C2015D4,3A

Power outlet 4 gang 250V 10A with neons C2015D4N,3A

socKet outLets, protected

overvoltage Surge Protection accessories

Power outlet double 250V 10A with surge protection C2025SF

residuaL current device protected accessories

Power outlet double 250V 10A with RCD – 30mA C2025RC

Power outlet double 250V 10A with RCD – 10mA C2025RC10

singLe – verticaL Mount covers

Cover power outlet single C2015VC2

Cover power outlet single with extra switch aperture C2015VXC2

singLe – HorizontaL Mount covers

Cover power outlet single C2015C

Cover for C2015/20 single switch socket C2015/20C

Cover power outlet single with extra switch aperture C2015XC

Cover power outlet single with extra 2 extra switch aperture C2015XXC

twin – verticaL Mount covers

Cover power outlet double (new cover) C2025VC2

cover power outLet doubLe witH extra switcH aperture

Cover power outlet double with extra switch (new cover) C2025VXC2

twin – HorizontaL Mount covers

Cover power outlet double C2025C

Cover power outlet double suit neon C2025NC

Quick connect cover C2025QCC

Cover power outlet double with extra switch aperture C2025XC

twin – sKirting Mount switcH covers

Cover power outlet double C2016/2C

Four gang – standard size covers

Cover power outlet 4 gang double pole C2015D4C

residuaL current device protected accessory cover

Cover to suit power outlet double with RCD protection C2025RCC

*Standard 2000 series plate design

18

switcH socKets verticaL Mount

Image cat no. LengtH WIDtH DePtH moUntIng centReS

c2015V

c2025V

c2025VXa

c2015V


c2015V15

c2015VXa

c2025V

c2025VXa

c2025V15

2025/2VS

switcH socKets HorizontaL Mount

c2015

c2025

c2015D4

c2015


c2015L

c2015S

c2015/15

c2015/20

c2015X

c2015XS

c2015XX

c2025

c2025L

c2025n

c2025S

c2025/15

c2025/15S

c2025Xa

c2025XaS

c2025SF 76mm 116mm 45mm 84mm

c2025Rc 76mm 116mm 47mm 84mm

c2025Rc10 76mm 116mm 47mm 84mm

c2025Qc 76mm 116mm 64mm 84mm

c2015D4 75mm 196mm 26mm 84mm

c2016/2 48mm 160mm 28mm 122mm

c2016/2D 48mm 160mm 28mm 122mm

19

pusH button MecHanisMs

Image cat no. DeScRIPtIon

30PB Push Button mech 20a / 16aX 250V Body fits 22mm hole

30PBL Push Button mech 20a / 16aX c/w LeD Body fits 22mm hole

switcH MecHanisMs


30m 250V/10a, 1 way/2 way – terminal bores of 4.1mm ø accommodate4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30mRD 250V/10a, 1 way/2 way (with red dolly mark) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30RSm2 250V/15a, Rotary (2 on - 2 off) – also suitable for 12V d.c. 15a, and audio and control applications. Switch positions indicated in window. m rating is 50.

30RSm3 250V/15a, Rotary (3 on - 1 off) – also suitable for 12V d.c. 15a, and audio and control applications. Switch positions indicated in window. m rating is 50.

30mco 250V/10a, changeover, double throw (selects alternate circuits).

30mI 250V/10a, Intermediate – four terminals of 3.5mm ø accommodates 2 x 2.5mm² cables. Body fits 22mm ø hole.

30mBP 440V/15a, Bell press – offers facility for momentary on or oFF (one Looping terminal).

30mBPn 250V/15a, Illuminated bell press - offers facility for momentary on or oFF. neon is connected across terminals 1 & 4. alternative lamp voltages available.

30mD 250V/10a, 1 way, double pole, single throw – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 90.

30mD2 250V/10a, 2 Way, double pole, double throw – six terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. m rating is 75.

30mD15 250V/15a, 1 way/2 way – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 90.

30mD20 250V/20a, 1 way, double pole – 4 terminals of 1.5mm ø accommodate 3 x 2.5mm² cables. Body fits 34mm ø hole. m rating is 100.

30m16 250V/16a, 1 way/2 way – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 90.

30m20 250V/20a, 1 way/2 way – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 90.

30m35 250V/35a, 1 way/2 way – terminal bore of 3.6mm ø & Looping terminal bore of 3.9mm ø. m rating is 160. marked 35a.

30tKm 250V/20a (5a fluorescent load), 1 way/2 way, toggle key actuated – one Looping terminal. m rating is 100.

30m

30m15RD

30RSm2

30tKm

30 Series Switch Mechanisms

20

neon indicator MecHanisMs


30/2nm250V/10a, 2 way rocker with neon indicator – neon can be wired to indicate on, oFF or PoWeR aVaILaBLe. Looping/switch terminal bores of 4.1mm ø. Body fits 34mm ø hole (note: neutral not required).

30n-ReD 250V – neon indicator (ReD)

30n-coLoUR 250V – neon indicator (otHeR coLoURS)

30nPa 250V - neon indicator (PoWeR aVaILaBLe)

Colours available are Blue, Green, Amber and Transparent. Other voltages are also available, including 6, 12, 24, 32, 48, 110 and 440. Suitable for DC loads.To order, add voltage to Cat. No. (for example, 30N12). Neons draw 250-275mW at 240V. Note: Inductive loads occasionally cause neons to glow in OFF position. To prevent this, place a 47kΩ, 0.5W 240V resistor across the terminals. Neutral and Active can be connected to either terminal.

LabeLLed 10a MecHanisMs


30Fm 250V/10a, 2 way (marked “Fan”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30Hm 250V/10a, 2 way (marked “Heat”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30em 250V/10a, 2 way (marked “eXHaUSt”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30Lm 250V/10a, 2 way (marked “LIgHt”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30mam 250V/10a, 2 way (marked “manUaL-aUto”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30Pm 250V/10a, 2 way (marked “DISPoSaL”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30Xm 250V/10a, 2 way (marked “WaSte”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30Ym 250V/10a, 2 way (marked “WaSH”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30aUm 250V/10a, 2 way (marked “aUto”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

*Also available in 16A. To order specify suffix ‘16’ eg. 30FM16


Labelled Switch MechanismsSchneider Electric offers a broad range of labelled 30 series switch mechanisms for easy identification when several switches

are installed on the same switchplate or when there is any chance of confusion over the load controlled.

30Hm

30Fm

30n-ReD

30nPa

30/2nm

30Km

21

LabeLLed 10a MecHanisMs (continued)


30acm 250V/10a, 2 way (marked “aIR con”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30PUm 250V/10a, 2 way (marked “PUmP”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30Bm 250V/10a, 2 way (marked “BatH”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30Km 250V/10a, 2 way (marked “KItcHen”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30Fnm 250V/10a, 2 way (marked “oFF/on”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30HLm 250V/10a, 2 way (marked “HI/LoW”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30mSen 250V/10a, 2 way (marked “SenSoR”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30moS 250V/10a, 2 way (marked “oUtSIDe”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30mFR 250V/10a, 2 way (marked “FoRWaRD/ReVeRSe”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30mFD 250V/10a, 2 way (marked “FRIDge”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30mmW 250V/10a, 2 way (marked “mIcRoWaVe”) - terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30mBPR 250V/10a, Bell press rocker – offers facility for momentary on or oFF. Suitable for extra low voltage applications (one Looping terminal).

39m 250V/10a, 3 Position – marked “HI-oFF-Lo”. three terminals, 3.5mm ø accommodate 2 x 2.5mm² cables.

39maom 250V/10a, 3 Position – marked “on-aUto-manUaL”. three terminals, 3.5mm ø accommodate 2 x 2.5mm² cables.

39mSon 250V/10a, 3 Position – marked “SenSoR-oFF-on”. three terminals, 3.5mm ø accommodate 2 x 2.5mm² cables.

30Fnm

30HLm

30mSen

30moS


39maom

10a iLLuMinated rocKer switcH MecHanisMs – witH Messages


30/2nmSen

30/2nmSen

250V/10a – 2 way inbuilt neon (marked “SenSoR”). neon can be wired to indicate on, oFF or PoWeR aVaILaBLe. Looping/switch terminals of bore 3.9mm ø. Body fits 34mm ø hole.

30/2nmoS

250V/10a – 2 way inbuilt neon (marked “oUtSIDe”). neon can be wired to indicate on, oFF or PoWeR aVaILaBLe. Looping/switch terminals of bore 3.9mm ø. Body fits 34mm ø hole.

note: neutral is not required.additional messages available. contact Schneider electric customer care for details. Free phone 0508 254 7725.typical messages:– Range - Heat/cooL - ReSet - LIVIng - HI/Lo - SPa - DaY nIgHt - HWS - Lo - oFF - on.

22



30m20HW 250V/20a, 2 way (marked “Hot WateR SeRVIce”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.



30m35HoB 250V/35a, 2 way (marked “HoB”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30m35oV 250V/35a, 2 way (marked “oVen”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.

30m35R 250V/35a, 2 way (marked “Range”) – terminal bores of 4.1mm ø accommodate 4 x 1.5mm² or 3 x 2.5mm² cables. Body fits 22mm ø hole. m rating is 100.30m35oV

35A

30m20HW

20A


23

diMMer, Fan controL and surge FiLter MecHanisMs


32e450Lm c-thru® Dimmer mechanism, Leading edge (suits incandescent lighting and low voltage lighting using iron core transformers), 220 - 240V/450W.

32e450tm c-thru® Dimmer mechanism, trailing edge (suits incandescent lighting and low voltage lighting using electronic transformers), 220 - 240V/450W.

32e500Fm c-thru® Fan Speed controller mechanism, 220-240V/500W.

32e450UDm c-thru® Dimmer Universal (suits leading, trailing and fan speed controllers).

30PotDm Dimmer Potentiometer (suits products such as 32 Series High Powered Dimmers, 780 Series and the 761 Series).

30PotFm Fan controller Potentiometer (suits products such as 32 Series High Powered Dimmers & 761 Series).

30SFm Surge Filter mechanism – 250V 10a

circuit identiFication and bLanKing products


30P Removable Blank Plug, to suit or blank out 30 Series aperture.

30PID Removable Plug, with identification facility, supplied with tamper proof transparent cover.

30PFo Plug, marked “FRIDge - FReeZeR onLY”.

30PIDa4L Label Sheets, 10 x a4 packet, red and white available (non-adhesive).


32e450Lm

32e450tm

32e500Fm

30PotFm

30SFm

30P

30PID

24

aM MecHanisMs


30FFPFmS Socket F type - PaL Female Straight

30FaVRgB Socket F type aV composite Red green and Blue

30FaVRWY Socket F type aV composite Red White and Yellow

30FaVRWo Socket F type aV Digital audio Red White and orange

30FaVY Socket F type composite Video - Yellow

30FaVB Socket F type aV - Sub Woffer - Black

speaKer MecHanisMs


30BcRm Banana connector Red (Used for speaker cabling only)

30BcBm Banana connectorBlack (Used for speaker cabling only)

data MecHanisMs


30RJ88Sma5 category 5 connector mechanisms, modular socket, category 5, 568a, RJ45 with flexible locking tabs Shuttered

30RJ88Sma5SH category 5 connector mechanisms, modular socket, category 5, 568a, RJ45 with flexible locking tabs

30RJ88Sma6 category 6 connector mechanisms, modular socket, category 6, 568a, RJ45 with flexible locking tabs

30RJ88Sma6SH category 6 connector mechanisms, modular socket, category 6, 568a, RJ45 with flexible locking tabs, shuttered


30FaVRgB

30FaVRWY

30FaVRWo

30BcRm

30RJ88Sma5

30RJ88Sma5SH

30RJ88Sma6

30RJ88Sma6SH

25

The next level

Available in white or black with a range of seven superb metal cover finishes, there’s something to suit every taste and budget.

C-Bus C2000 can go beyond the simple on/off switch delivering unlimited dimming, switching and home automation control found in all C-Bus enabled switches. Perfect if you’re are keen on keeping the same style of switches throughout your entire home, but only want select rooms to incorporate home automation features.

C5032NL C5034NL

26

Make the most of your energyWorld energy consumption has risen 45% since 1980 and it is projected to be 70% higher by 2030. To limit energy cost and its impact on the environment, we must learn to adapt and manage energy consumption, costs and pollutants. Schneider Electric is committed to reducing the energy cost and CO2 emission of its customers.

Our products, solutions and services are present at every link in the energy value chain for the building, infrastructure, industry and residential market to ensure your comfort and performance, while taking into account environmental issues.

This catalogue was printed at Blue Star Print Group (NZ) Ltd, who are FSC Chain of Custody certified, using FSC Chain of Custody paper. FSC (Forest Stewardship Council) is an international, not-for-profit membership-based organisation that brings people together to find solutions to problems created by bad forestry practices and to reward good management. The FSC Chain of Custody is the highest and most trustworthy international certification for paper and timber products. This catalogue was manufactured using mineral oil free ink (produced with renewable resources, unlike traditional mineral oil based inks). The mill where the paper is manufactured is ISO 14001, the paper is Elemental Chlorine Free (ECF) and the pulp is Mixed Sources FSC certified.

SCS COC 001217

27

Customer Care: 0508 254 7725 Freefax: 0508 250 305Email: [email protected] N

ZCLI

PC20

00TG

1008

Schneider Electric (NZ) Ltd.

14 Charann Place, Avondale, Auckland 1026PO Box 15355, New Lynn, Waitakere 0640Tel: +64 9 829 0490Fax: +64 9 829 0491www.schneider-electric.co.nz

133238

C2000 Products are available through electrical wholesalers New Zealand wide.C2000 Products are designed to ISO 9001 and ISO 9002.© 2009 Schneider Electric. As standards, specifications and designs change from time to time, always ask for confirmation of the information given in this publication.

Documents

Classic C2000 Collection - Clipsalupdates.clipsal.com/ClipsalOnlineNZ/Files/Brochures/ZA000004.pdf · The first thing you’ll notice about the C2000 Classic series is the cover comes