Upload
leduong
View
237
Download
2
Embed Size (px)
Citation preview
131
Clamping tools with ISOMAPAL has a wide range of products in the area of steep taper clamping tools and adapters in accordance with DIN 69871.
Along with chucks of all common types, you will find steep taper adapters that in combination with the flange adapters in accordance with MAPAL works standard ensure increased radial run-out accuracy.
Chucksc Chucks for cylindrical shanks with clamping surfaces 132-137
c HighTorque Chuck 138
c Hydraulic chucks HydroChuck 139-141
c Shrink chucks ThermoChuck 142-147
c Milling cutter arbors 148
c Precision-DrillChuck 149-153
Replaceable head holdersc CFS replaceable head holders 154
Adaptersc KS steep taper adapters 155-157
Clamping technology | Clamping tools with ISO
l2
l3
l1
2° ��
d 1 d 2
�
G
40 6 25 50 36 10 M5 0,9 MNC-SK040-06-050-3-0-A 10060812 30326221
40 8 28 50 36 10 M6 1,0 MNC-SK040-08-050-3-0-A 10060813 30326224
40 10 35 50 40 10 M8 1,0 MNC-SK040-10-050-3-0-A 10060814 30326226
40 12 42 50 45 10 M10 1,2 MNC-SK040-12-050-3-0-A 10060815 30326232
40 14 44 50 45 10 M10 1,2 MNC-SK040-14-050-3-0-A 10060817 30326232
40 16 48 63 48 10 M12 1,3 MNC-SK040-16-063-3-0-A 10060818 30326237
40 18 50 63 48 10 M12 1,4 MNC-SK040-18-063-3-0-A 10060819 30326237
40 20 52 63 50 10 M16 1,4 MNC-SK040-20-063-3-0-A 10060820 30326239
40 25 65 100 56 10 M20 2,3 MNC-SK040-25-100-3-0-A 10060822 30326243
40 32 72 100 60 10 M20 2,1 MNC-SK040-32-100-3-0-A 10073683 30326243
50 6 25 63 36 10 M5 2,8 MNC-SK050-06-063-3-0-A 10073684 30326221
50 8 28 63 36 10 M6 2,8 MNC-SK050-08-063-3-0-A 10073685 30326224
50 10 35 63 40 10 M8 2,9 MNC-SK050-10-063-3-0-A 10073686 30326226
50 12 42 63 45 10 M10 3,0 MNC-SK050-12-063-3-0-A 10073687 30326232
50 14 44 63 45 10 M10 3,1 MNC-SK050-14-063-3-0-A 10073688 30326232
50 16 48 63 48 10 M12 3,1 MNC-SK050-16-063-3-0-A 10073689 30326237
50 18 50 63 48 10 M12 3,1 MNC-SK050-18-063-3-0-A 10073690 30326237
50 20 52 63 50 10 M16 3,2 MNC-SK050-20-063-3-0-A 10073691 30326239
50 25 65 80 56 10 M20 3,9 MNC-SK050-25-080-3-0-A 10073692 30326243
50 32 72 100 60 10 M20 4,1 MNC-SK050-32-100-3-0-A 10073693 30326243
132
Chucks for cylindrical shanks with angled clamping surfaceShank ISO in accordance with DIN 69871 Form AD/B
Nominal size
ISO
Dimensions G Weight
kg
Specification Order No. Order No.
length adjust-
ment screwd1 d2 l1 l2 l3
Dimensions in mm.
Clamping technology | Clamping tools with ISO
Usage: For mounting milling cutters and drills with cylindrical shank and angled clamping surface (2°) in accordance with DIN 1835 Form E and DIN 6535 Form HE.
Supply includes: Built-in clamping screw and length adjustment screw, does not include pull stud.
Design: Permissible run-out variation on the taper shank in relation to the clamping diameter d1 = 0.003 mm. The bore tolerance is much tighter than DIN 1835 (dH4) to obtain machining accuracies of the highest quality. Normal setting Form AD, if Form B is required, please state with the order.
Note: From clamping diameter d1 = 25 mm two clamping screw are provided. The length adjustment screws have a through hole for coolant.
Balancing quality: G 2.5 to 16,000 min-1
6 M6x9 10060983
8 M8x9 10042517
10 M10x12 10004134
12, 14 M12x14 30002947
16, 18 M14x16 10004136
20 M16x16 10004137
25 M18x2x20 10004141
32 M20x2x20 10004129
40, 50 2 M5x5 10036757
133
For clamping diameter
d1
Clamping screw in accordance with DIN 1835-B
Size Order No.
Clamping technology | Clamping tools with ISO
Chucks for cylindrical shanks with angled clamping surfaceShank ISO in accordance with DIN 69871 Form AD/B
Spare parts
Dimensions in mm.
For nominal size
ISO
Quantity
required
Threaded pin in accordance with ISO 4026
Size Order No.
d 1 d 2
l1
l2
l3
G
�
��
2°
40 16 48 80 50 4 M12x1,25 1,6 MNC-SK040-16-080-3-0-A 10058633
40 20 50 80 50 4 M16x1,5 1,9 MNC-SK040-20-080-3-0-A 10058644
40 25 65 95 56 4 M20x1,5 2,3 MNC-SK040-25-095-3-0-A 10058647
45 16 48 80 48 4 M12x1,25 2,1 MNC-SK045-16-080-3-0-A 10058634
45 20 52 85 50 4 M16x1,5 2,3 MNC-SK045-20-085-3-0-A 10058645
45 25 63 90 56 4 M20x1,5 2,5 MNC-SK045-25-090-3-0-A 10058648
45 40 80 104 70 4 M20x1,5 2,8 MNC-SK045-40-104-3-0-A 10058650
50 16 48 80 48 4 M12x1,25 2,8 MNC-SK050-16-080-3-0-A 10058636
50 20 52 85 50 4 M16x1,5 3,1 MNC-SK050-20-085-3-0-A 10058646
50 25 65 90 56 4 M20x1,5 3,3 MNC-SK050-25-090-3-0-A 10058649
50 40 80 104 70 4 M20x1,5 4,1 MNC-SK050-40-104-3-0-A 10058651
16 M10x12 10004134 M12x1,25x35 30326183
20 M12x14 30002947 M16x1,5x40 30326184
25 M12x14 30002947 M20x1,5x45 30326185
40 M12x14 30002947 M20x1,5x45 30326185
134
40, 45, 50 2 M5x5 10036757
For clamping diameter
d1
Clamping screw in accordance with DIN 1835-B Length adjustment screw
Size Order No. Size Order No.
Chucks for cylindrical shanks with angled clamping surfaceShank ISO in accordance with DIN 69871 Form AD/B
Usage: For mounting MAPAL NC reamers with cylindrical shank and angled clamping surface (2°) similar to DIN 1835 Form E.
Supply includes: Built-in clamping screw and length adjustment screw, does not include pull stud.
Design: Permissible run-out variation on the taper shank in relation to the clamping diameter d1 ≤ 0.003 mm. The bore tolerance is reduced to 0.003 mm to obtain the highest quality machining accuracies. Normal setting Form AD, if Form B is required, please state with the order.
Note: From clamping diameter d1 = 40 mm two clamping screw are provided. The length adjustment screws have a through hole for coolant. For pull studs see page 224.
Balancing quality: G 6.3 at 3,000 min-1
Nominal size
ISO
Dimensions G Weight
kg
Specification Order No.
d1 d2 l1 l2 l3
Spare parts
Dimensions in mm.
Clamping technology | Clamping tools with ISO
For nominal size
ISOQuantity required
Threaded pin in accordance with ISO 4026
Size Order No.
Dimensions in mm.
135
d 1 d 2
�
�l1
40 6 25 50 0,9 MWC-tSK040-06-050-3-0-W 10059555
40 6 25 100 1,1 MWC-SK040-06-100-3-0-W 10060644
40 6 25 160 1,3 MWC-SK040-06-160-3-0-W 10060645
40 8 28 50 1,0 MWC-SK040-08-050-3-0-W 10060646
40 8 28 100 1,1 MWC-SK040-08-100-3-0-W 10060647
40 8 28 160 1,4 MWC-SK040-08-160-3-0-W 10060648
40 10 35 50 1,0 MWC-SK040-10-050-3-0-W 10060649
40 10 35 100 1,4 MWC-SK040-10-100-3-0-W 10060650
40 10 35 160 1,8 MWC-SK040-10-160-3-0-W 10060651
40 12 42 50 1,2 MWC-SK040-12-050-3-0-W 10060652
40 12 42 100 1,7 MWC-SK040-12-100-3-0-W 10060653
40 12 42 160 2,2 MWC-SK040-12-160-3-0-W 10060654
40 14 44 50 1,2 MWC-SK040-14-050-3-0-W 10060655
40 14 44 100 1,7 MWC-SK040-14-100-3-0-W 10060656
40 14 44 160 2,5 MWC-SK040-14-160-3-0-W 10060657
40 16 48 63 1,3 MWC-SK040-16-063-3-0-W 10060658
40 16 48 100 1,7 MWC-SK040-16-100-3-0-W 10060660
40 16 48 160 2,7 MWC-SK040-16-160-3-0-W 10060661
40 18 50 63 1,3 MWC-SK040-18-063-3-0-W 10060662
40 18 50 100 1,9 MWC-SK040-18-100-3-0-W 10060663
40 18 50 160 2,8 MWC-SK040-18-160-3-0-W 10060664
40 20 52 63 1,3 MWC-SK040-20-063-3-0-W 10059554
40 20 52 100 1,8 MWC-SK040-20-100-3-0-W 10060666
40 20 52 160 2,8 MWC-SK040-20-160-3-0-W 10060667
40 25 65 100 2,3 MWC-SK040-25-100-3-0-W 10060668
40 25 65 160 3,9 MWC-SK040-25-160-3-0-W 10060669
40 32 72 100 2,6 MWC-SK040-32-100-3-0-W 10064102
Clamping technology | Clamping tools with ISO
Continued on next page.
Chucks for cylindrical shanks with lateral drive areaShank ISO in accordance with DIN 69871 Form AD/B
Nominal size
ISO
Dimensions Weight
kg
Specification Order No.
d1 d2 l1
Dimensions in mm.
136
50 6 25 63 2,8 MWC-SK050-06-063-3-0-W 10073656
50 6 25 100 3,1 MWC-SK050-06-100-3-0-W 10073657
50 6 25 160 3,5 MWC-SK050-06-160-3-0-W 10073658
50 8 28 63 2,8 MWC-SK050-08-063-3-0-W 10073659
50 8 28 100 3,3 MWC-SK050-08-100-3-0-W 10073660
50 8 28 160 3,7 MWC-SK050-08-160-3-0-W 10073661
50 10 35 63 2,9 MWC-SK050-10-063-3-0-W 10073662
50 10 35 100 3,3 MWC-SK050-10-100-3-0-W 10073663
50 10 35 160 3,8 MWC-SK050-10-160-3-0-W 10073664
50 12 42 63 3,1 MWC-SK050-12-063-3-0-W 10073665
50 12 42 100 3,4 MWC-SK050-12-100-3-0-W 10073666
50 12 42 160 3,9 MWC-SK050-12-160-3-0-W 10073667
50 14 44 63 3,2 MWC-SK050-14-063-3-0-W 10073668
50 14 44 100 3,5 MWC-SK050-14-100-3-0-W 10073669
50 14 44 160 4,2 MWC-SK050-14-160-3-0-W 10073670
50 16 48 63 3,4 MWC-SK050-16-063-3-0-W 10073671
50 16 48 100 1,0 MWC-SK050-16-100-3-0-W 10073672
50 16 48 160 1,5 MWC-SK050-16-160-3-0-W 10073673
50 18 20 63 3,2 MWC-SK050-18-063-3-0-W 10073674
50 18 50 100 4,9 MWC-SK050-18-100-3-0-W 10073675
50 18 50 160 4,6 MWC-SK050-18-160-3-0-W 10073676
50 20 52 63 3,2 MWC-SK050-20-063-3-0-W 10073677
50 20 52 100 4,0 MWC-SK050-20-100-3-0-W 10073678
50 20 52 160 4,6 MWC-SK050-20-160-3-0-W 10073679
50 25 65 80 4,0 MWC-SK050-25-080-3-0-W 10073680
50 25 65 160 5,8 MWC-SK050-25-160-3-0-W 10073681
50 32 72 100 5,9 MWC-SK050-32-100-3-0-W 10059057
50 32 72 160 6,5 MWC-SK050-32-160-3-0-W 10073682
d 1 d 2
�
�
l1
Clamping technology | Clamping tools with ISO
Nominal size
ISO
Dimensions Weight
kg
Specification Order No.
d1 d2 l1
Dimensions in mm.
Chucks for cylindrical shanks with lateral drive areaShank ISO in accordance with DIN 69871 Form AD/B
Usage: For mounting milling cutters and drills with cylindrical shank and angled clamping surface (2°) in accordance with DIN 1835 Form E and DIN 6535 Form HE.
Supply includes: Built-in clamping screw and length adjustment screw, does not include pull stud.
Design: Permissible run-out variation on the taper shank in relation to the clamping diameter d1 = 0.003 mm.
The bore tolerance is much tighter than DIN 1835 (dH4) to obtain machining accuracies of the highest quality. Normal setting Form AD, if Form B is required, please state with the order.
Note: From clamping diameter d1 = 25 mm two clamping screw are provided. The length adjustment screws have a through hole for coolant.
Balancing quality: G 2.5 to 16,000 min-1
137
6 M6x9 10060983
8 M8x9 10042517
10 M10x12 10004134
12, 14 M12x14 30002947
16,18 M14x16 10004136
20 M16x16 10004137
25 M18x2x20 10004141
32 M20x2x20 10004129
40, 50 2 M5x5 10036757
Clamping technology | Clamping tools with ISO
Chucks for cylindrical shanks with lateral drive areaShank ISO in accordance with DIN 69871 Form AD/B
For clamping diameter
d1
Clamping screw in accordance with DIN 1835-B
Size Order No.
Spare parts
Dimensions in mm.
For nominal size
ISO
Quantity
required
Threaded pin in accordance with ISO 4026
Size Order No.
138
d 1 d 2 d 3
l1
l4
G
l2
l3
40 6 32 50 75 37 10 56 M5 1,4 HTC-SK040-06-075-3-0-A 30297611
40 8 34 50 75 37 10 56 M6 1,4 HTC-SK040-08-075-3-0-A 30297612
40 10 36 50 80 41 10 61 M8x1 1,4 HTC-SK040-10-080-3-0-A 30297613
40 12 38 50 85 46 10 66 M10x1 1,5 HTC-SK040-12-085-3-0-A 30297614
40 14 40 50 85 46 10 66 M10x1 1,6 HTC-SK040-14-085-3-0-A 30297615
40 16 42 50 90 49 10 71 M12x1 1,6 HTC-SK040-16-090-3-0-A 30297616
40 18 44 50 90 49 10 71 M12x1 1,7 HTC-SK040-18-090-3-0-A 30297617
40 20 48 50 95 51 10 76 M16x1 1,7 HTC-SK040-20-095-3-0-A 30297618
40 25 57 50 110 57 10 91 M16x1 2,2 HTC-SK040-25-110-3-0-A 30297619
40 32 63 50 120 61 10 101 M16x1 2,5 HTC-SK040-32-120-3-0-A 30297620
Clamping technology | Clamping tools with ISO
Usage: For clamping tools with smooth cylindrical shanks in accordance with DIN 1835 Form A, DIN 6535 Form HA up to ø 32 mm as well as with recesses in accordance with DIN 1835 Form B, E and DIN 6535 Form HB, HE directly and without intermediate sleeve in the clamping diameter. The clamping diameter is designed for a shank tolerance of h6.
Supply includes: Length adjustment screws, does not include pull stud. Includes hexagonal T-key.
Design: Normal setting Form AD, if Form B is required, please state with the order.
Note: Chuck with axial tool length adjustment. For intermediate sleeve for reducing the clamping diameter see page 216-218. (The accuracy may be affected on the usage of the intermediate sleeve). For pull studs see page 224. Length adjustment screw available on request.
Balancing quality: G 2.5 at 25,000 min-1
HighTorque Chuck for high torque transmissionShank ISO in accordance with DIN 69871 Form AD/B
Nominal size
ISO
Dimensions G Weight
kg
Specification Order No.
d1 d2 d3 l1 l2 l3 l4
Dimensions in mm.
139
d 1
d 2 d 3
l1
G
l2
l3
l4
40 6 26 49,5 80,5 37 10 29,5 M5 1,3 MHC-SK040-06-080-3-0-A 30250958
40 8 28 49,5 80,5 37 10 30 M6 1,3 MHC-SK040-08-080-3-0-A 30250959
40 10 30 49,5 80,5 41 10 35 M8x1 1,3 MHC-SK040-10-080-3-0-A 30250960
40 12 32 49,5 80,5 46 10 40 M10x1 1,3 MHC-SK040-12-080-3-0-A 30250961
40 14 34 49,5 80,5 46 10 40 M10x1 1,3 MHC-SK040-14-080-3-0-A 30250962
40 16 38 49,5 80,5 49 10 45 M12x1 1,4 MHC-SK040-16-080-3-0-A 30250963
40 18 40 49,5 80,5 49 10 46 M12x1 1,3 MHC-SK040-18-080-3-0-A 30250964
40 20 42 49,5 80,5 51 10 47 M16x1 1,3 MHC-SK040-20-080-3-0-A 30250965
40 25 55 63 80,5 57 10 28 M16x1 1,6 MHC-SK040-25-080-3-0-A 30250966
40 32 63 70 80,5 61 10 25,5 M16x1 1,7 MHC-SK040-32-080-3-0-A 30250967
50 6 26 49,5 80,5 37 10 29,5 M5 3,2 MHC-SK050-06-080-3-0-A 30250968
50 8 28 49,5 80,5 37 10 30 M6 3,3 MHC-SK050-08-080-3-0-A 30250969
50 10 30 49,5 80,5 41 10 35 M8x1 3,3 MHC-SK050-10-080-3-0-A 30250970
50 12 32 49,5 80,5 46 10 40 M10x1 3,3 MHC-SK050-12-080-3-0-A 30250971
50 14 34 49,5 80,5 46 10 40 M10x1 3,3 MHC-SK050-14-080-3-0-A 30250972
50 16 38 49,5 80,5 49 10 45 M12x1 3,3 MHC-SK050-16-080-3-0-A 30250973
50 18 40 49,5 80,5 49 10 46 M12x1 3,3 MHC-SK050-18-080-3-0-A 30250974
50 20 42 49,5 80,5 51 10 42 M16x1 3,3 MHC-SK050-20-080-3-0-A 30250975
50 25 55 63 100 57 10 48 M16x1 3,8 MHC-SK050-25-100-3-0-A 30250976
50 32 63 70 100 61 10 61 M16x1 4,2 MHC-SK050-32-100-3-0-A 30250977
Clamping technology | Clamping tools with ISO
Short slim design
Hydraulic chucks HydroChuckShank ISO in accordance with DIN 69871 AD/B
Nominal size
ISO
Dimensions G Weight
kg
Specification Order No.
d1 d2 d3 l1 l2 l3 l4
Dimensions in mm.
Usage: For clamping tools with smooth cylindrical shanks in accordance with DIN 1835 Form A, DIN 6535 Form HA up to ø 32 mm as well as with recesses in accordance with DIN 1835 Form B, E and DIN 6535 Form HB, HE directly and without intermediate sleeve in the clamping diameter.
The clamping diameter is designed for a shank tolerance of h6.
Supply includes: Length adjustment screw, does not include pull stud. Includes hexagonal T-key.
Design: Longest tool lives and highest manufacturing quality on usage of smooth cylindrical shanks in accordance with DIN 1835 Form A and DIN 6535 Form HA. With a projection length of 2.5 x D (max. 50 mm) radial run-out accuracy 0.003 mm.
On usage of cylindrical shanks with angled clamping surface (Form E and Form HE) the accuracy may be affected. Normal setting Form AD, if Form B is required, please state with the order.
Note: Chuck with axial tool length adjustment. For intermediate sleeve for reducing the clamping diameter see page 216-218. (The accuracy may be affected on the usage of the intermediate sleeve). For pull studs see page 224. Length adjustment screw available on request.
Balancing quality: G 2.5 at 16,000 min-1
140
d 1
d 2 d 3
l1
l4
G
l2
l3
40 6 26 49,5 110 37 10 29 M5 1,7 MHC-SK040-06-110-3-0-A 30250978
40 8 28 49,5 110 37 10 30 M6 1,8 MHC-SK040-08-110-3-0-A 30250979
40 10 30 49,5 110 41 10 35 M8x1 1,8 MHC-SK040-10-110-3-0-A 30250980
40 12 32 49,5 110 46 10 40 M10x1 1,8 MHC-SK040-12-110-3-0-A 30250981
40 14 34 49,5 110 46 10 40 M10x1 1,8 MHC-SK040-14-110-3-0-A 30250982
40 16 38 49,5 110 49 10 45 M12x1 1,8 MHC-SK040-16-110-3-0-A 30250983
40 18 40 49,5 110 49 10 46 M12x1 1,9 MHC-SK040-18-110-3-0-A 30250984
40 20 42 49,5 110 51 10 47 M16x1 1,9 MHC-SK040-20-110-3-0-A 30250985
40 25 55 63 110 57 10 28 M16x1 2,3 MHC-SK040-25-110-3-0-A 30250986
40 32 63 59 110 61 10 59 M16x1 2,4 MHC-SK040-32-110-3-0-A 30250987
50 6 26 49,5 110 37 10 29 M5 4,1 MHC-SK050-06-110-3-0-A 30250988
50 8 28 49,5 110 37 10 30 M6 4,1 MHC-SK050-08-110-3-0-A 30250989
50 10 30 49,5 110 41 10 35 M8x1 4,1 MHC-SK050-10-110-3-0-A 30250990
50 12 32 49,5 110 46 10 40 M10x1 4,3 MHC-SK050-12-110-3-0-A 30250991
50 14 34 49,5 110 46 10 40 M10x1 4,3 MHC-SK050-14-110-3-0-A 30250992
50 16 38 49,5 110 49 10 45 M12x1 4,3 MHC-SK050-16-110-3-0-A 30250993
50 18 40 49,5 110 49 10 46 M12x1 4,5 MHC-SK050-18-110-3-0-A 30250994
50 20 42 49,5 110 51 10 42 M16x1 4,5 MHC-SK050-20-110-3-0-A 30250995
50 25 55 63 110 57 10 48 M16x1 4,7 MHC-SK050-25-110-3-0-A 30250996
50 32 63 70 110 61 10 50 M16x1 4,8 MHC-SK050-32-110-3-0-A 30250997
Clamping technology | Clamping tools with ISO
Usage: For clamping tools with smooth cylindrical shanks in accordance with DIN 1835 Form A, DIN 6535 Form HA up to ø 32 mm as well as with recesses in accordance with DIN 1835 Form B, E and DIN 6535 Form HB, HE directly and without intermediate sleeve in the clamping diameter.
The clamping diameter is designed for a shank tolerance of h6.
Supply includes: Length adjustment screw, does not include pull stud. Includes hexagonal T-key.
Design: Longest tool lives and highest manufacturing quality on usage of smooth cylindrical shanks in accordance with DIN 1835 Form A and DIN 6535 Form HA. With a projection length of 2.5 x D (max. 50 mm) radial run-out accuracy 0.003 mm.
On usage of cylindrical shanks with angled clamping surface (Form E and Form HE) the accuracy may be affected. Normal setting Form AD, if Form B is required, please state with the order.
Note: Chuck with axial tool length adjustment. For intermediate sleeve for reducing the clamping diameter see page 216-218. (The accuracy may be affected on the usage of the intermediate sleeve). For pull studs see page 224. Length adjustment screw available on request.
Balancing quality: G 2.5 at 16,000 min-1
Long slim design
Hydraulic chucks HydroChuckShank ISO in accordance with DIN 69871 AD/B
Nominal size
ISO
Dimensions G Weight
kg
Specification Order No.
d1 d2 d3 l1 l2 l3 l4
Dimensions in mm.
141
d 2d 1
l1
G
l2
l3
40 20 49,5 64,5 51 10 M16x1 1,3 MHC-SK040-20-064-3-0-A 30251034
50 32 72 81 61 10 M16x1 3,9 MHC-SK050-32-081-3-0-A 30251035
Clamping technology | Clamping tools with ISO
Short heavy-duty design
Hydraulic chucks HydroChuckShank ISO in accordance with DIN 69871 Form AD/B
Nominal size
ISO
Dimensions G Weight
kg
Specification Order No.
d1 d2 l1 l2 l3
Dimensions in mm.
Usage: For clamping tools with smooth cylindrical shanks in accordance with DIN 1835 Form A, DIN 6535 Form HA up to ø 32 mm as well as with recesses in accordance with DIN 1835 Form B, E and DIN 6535 Form HB, HE directly and without intermediate sleeve in the clamping diameter.
The clamping diameter is designed for a shank tolerance of h6.
Supply includes: Length adjustment screw, does not include pull stud. Includes hexagonal T-key.
Design: Longest tool lives and highest manufacturing quality on usage of smooth cylindrical shanks in accordance with DIN 1835 Form A and DIN 6535 Form HA. With a projection length of 2.5 x D (max. 50 mm) radial run-out accuracy 0.003 mm.
On usage of cylindrical shanks with angled clamping surface (Form E and Form HE) the accuracy may be affected. Normal setting Form AD, if Form B is required, please state with the order.
Note: Chuck with axial tool length adjustment. For intermediate sleeve for reducing the clamping diameter see page 216-218. (The accuracy may be affected on the usage of the intermediate sleeve). For pull studs see page 224. Length adjustment screw available on request.
Balancing quality: G 2.5 at 16,000 min-1
142
l1
d 3d 2d 1G
l3
l2
4,5°
l4
30 3 10 17 80 22 10 12 M6 0,5 MTC-SK030-03-080-1-0-A 30261560
30 4 15 22 80 26 10 16 M6 0,5 MTC-SK030-04-080-1-0-A 30261561
30 5 15 22 80 30 10 20 M6 0,5 MTC-SK030-05-080-1-0-A 30261562
30 6 21 27 80 36 10 26 M5 0,6 MTC-SK030-06-080-1-0-A 30261563
30 8 21 27 80 36 10 26 M6 0,6 MTC-SK030-08-080-1-0-A 30261564
30 10 24 32 80 41 10 31 M8x1 0,6 MTC-SK030-10-080-1-0-A 30261565
30 12 24 32 80 47 10 37 M10x1 0,7 MTC-SK030-12-080-1-0-A 30261566
30 14 27 34 80 47 10 37 M10x1 0,7 MTC-SK030-14-080-1-0-A 30261567
30 16 27 34 80 50 10 40 M12x1 0,7 MTC-SK030-16-080-1-0-A 30261568
30 18 33 42 80 50 10 40 M12x1 0,8 MTC-SK030-18-080-1-0-A 30261569
30 20 33 42 80 52 10 42 M16x1 0,8 MTC-SK030-20-080-1-0-A 30261570
Clamping technology | Clamping tools with ISO
Shrink chucks ThermoChuckShank ISO in accordance with DIN 69871 Form AD
Nominal size
ISO
Dimensions G Weight
kg
Specification Order No.
d1 d2 d3 l1 l2 l3 l4
Dimensions in mm.
Supply includes: Built-in length adjustment screw with through hole, does not include fine balancing screws or pull stud.
Design: Permissible run-out variation on the taper shank in relation to the clamping diameter d1 = 0.003 mm. The clamping diameter is designed for a shank tolerance of h6. Normal setting Form AD, if Form B is required, please state with the order.
Note: For tool extensions see page 220. For pull studs see page 224. Length adjustment screw and fine balancing screw available on request.
Balancing quality: G 2.5 at 16,000 min-1
143
l1
d 3d 2d 1l3 l4
l
G
4,5°
2
40 3 10 17 80 22 10 12 M6 0,9 MTC-SK040-03-080-3-0-A 30261571
40 3 10 20 120 12 0,9 MTC-SK040-03-120-3-0-W 30261584
40 3 10 20 160 12 1,0 MTC-SK040-03-160-3-0-W 30261585
40 4 15 22 80 26 10 16 M6 0,9 MTC-SK040-04-080-3-0-A 30261572
40 4 15 22 120 16 1,0 MTC-SK040-04-120-3-0-W 30261586
40 4 15 22 160 16 1,1 MTC-SK040-04-160-3-0-W 30261587
40 5 15 22 80 30 10 20 M6 0,9 MTC-SK040-05-080-3-0-A 30261573
40 5 15 22 120 20 1,0 MTC-SK040-05-120-3-0-W 30261588
40 5 15 22 160 20 1,1 MTC-SK040-05-160-3-0-W 30261589
40 6 21 27 80 36 10 26 M5 1,0 MTC-SK040-06-080-3-0-A 30261574
40 6 21 27 120 36 10 26 M6 1,0 MTC-SK040-06-120-3-0-A 30261590
40 6 21 27 160 36 10 26 M6 1,1 MTC-SK040-06-160-3-0-A 30261591
40 7 21 27 80 36 10 26 M6 1,3 MTC-SK040-07-080-3-0-A 30267108
Clamping technology | Clamping tools with ISO
Supply includes: Built-in length adjustment screw with through hole, does not include fine balancing screws or pull stud.
Design: Permissible run-out variation on the taper shank in relation to the clamping diameter d1 = 0.003 mm. The clamping diameter is designed for a shank tolerance of h6. Normal setting Form AD, if Form B is required, please state with the order.
Note: For tool extensions see page 220. For pull studs see page 224. Length adjustment screw and fine balancing screw available on request.
Balancing quality: G 2.5 at 16,000 min-1
Shrink chucks ThermoChuckShank ISO in accordance with DIN 69871 Form AD/B
Nominal size
ISO
Dimensions G Weight
kg
Specification Order No.
d1 d2 d3 l1 l2 l3 l4
Dimensions in mm.
Continued on next page.
144
l1
d 3d 2d 1l3 l4
l
G
4,5°
2
40 8 21 27 80 36 10 26 M6 1,0 MTC-SK040-08-080-3-0-A 30261575
40 8 21 27 120 36 10 26 M6 1,1 MTC-SK040-08-120-3-0-A 30261592
40 8 21 27 160 36 10 26 M6 1,3 MTC-SK040-08-160-3-0-A 30261593
40 9 21 27 80 36 10 26 M6 1,0 MTC-SK040-09-080-3-0-A 30267109
40 10 24 32 80 41 10 31 M8x1 1,0 MTC-SK040-10-080-3-0-A 30261576
40 10 24 32 120 41 10 31 M8x1 1,2 MTC-SK040-10-120-3-0-A 30261594
40 10 24 32 160 41 10 31 M8x1 1,5 MTC-SK040-10-160-3-0-A 30261595
40 11 24 32 80 41 10 31 M8x1 1,0 MTC-SK040-11-080-3-0-A 30267110
40 12 24 32 80 47 10 37 M10x1 1,0 MTC-SK040-12-080-3-0-A 30261577
40 12 24 32 120 47 10 37 M10x1 1,2 MTC-SK040-12-120-3-0-A 30261596
40 12 24 32 160 47 10 37 M10x1 1,5 MTC-SK040-12-160-3-0-A 30261597
40 13 24 32 80 47 10 37 M10x1 1,0 MTC-SK040-13-080-3-0-A 30267112
40 14 27 34 80 47 10 37 M10x1 1,0 MTC-SK040-14-080-3-0-A 30261578
40 14 27 34 120 47 10 37 M10x1 1,3 MTC-SK040-14-120-3-0-A 30261598
40 14 27 34 160 47 10 37 M10x1 1,6 MTC-SK040-14-160-3-0-A 30261599
40 15 27 34 80 47 10 37 M10x1 1,0 MTC-SK040-15-080-3-0-A 30267113
40 16 27 34 80 50 10 40 M12x1 1,0 MTC-SK040-16-080-3-0-A 30261579
40 16 27 34 120 50 10 40 M12x1 1,3 MTC-SK040-16-120-3-0-A 30261600
40 16 27 34 160 50 10 40 M12x1 1,6 MTC-SK040-16-160-3-0-A 30261601
40 18 33 42 80 50 10 40 M12x1 1,1 MTC-SK040-18-080-3-0-A 30260195
40 18 33 42 120 50 10 40 M12x1 1,5 MTC-SK040-18-120-3-0-A 30261602
40 18 33 42 160 50 10 40 M12x1 1,7 MTC-SK040-18-160-3-0-A 30261603
40 20 33 42 80 52 10 42 M16x1 1,1 MTC-SK040-20-080-3-0-A 30261581
40 20 33 42 120 52 10 42 M16x1 1,5 MTC-SK040-20-120-3-0-A 30261604
40 20 33 42 160 52 10 42 M16x1 1,8 MTC-SK040-20-160-3-0-A 30261605
40 25 44 53 100 58 10 48 M16x1 1,6 MTC-SK040-25-100-3-0-A 30261582
40 25 44 53 120 58 10 48 M16x1 1,8 MTC-SK040-25-120-3-0-A 30261606
40 25 44 53 160 58 10 48 M16x1 2,5 MTC-SK040-25-160-3-0-A 30261607
40 32 44 53 100 62 10 52 M16x1 1,4 MTC-SK040-32-100-3-0-A 30261583
40 32 44 53 120 62 10 52 M16x1 1,7 MTC-SK040-32-120-3-0-A 30261608
40 32 44 53 160 62 10 52 M16x1 2,4 MTC-SK040-32-160-3-0-A 30261610
Clamping technology | Clamping tools with ISO
Shrink chucks ThermoChuckShank ISO in accordance with DIN 69871 Form AD/B
Nominal size
ISO
Dimensions G Weight
kg
Specification Order No.
d1 d2 d3 l1 l2 l3 l4
Dimensions in mm.
145
50 3 10 20 80 12 2,7 MTC-SK050-03-080-3-0-W 30261611
50 3 10 20 120 12 2,8 MTC-SK050-03-120-3-0-W 30261612
50 3 10 20 160 12 3,0 MTC-SK050-03-160-3-0-W 30261613
50 4 15 25 80 16 2,7 MTC-SK050-04-080-3-0-W 30261614
50 4 15 22 120 16 2,8 MTC-SK050-04-120-3-0-W 30261615
50 4 15 22 160 16 3,0 MTC-SK050-04-160-3-0-W 30261616
50 5 15 25 80 20 2,7 MTC-SK050-05-080-3-0-W 30261617
50 5 15 22 120 20 2,8 MTC-SK050-05-120-3-0-W 30261618
50 5 15 22 160 20 3,0 MTC-SK050-05-160-3-0-W 30261619
50 6 21 27 80 36 10 26 M5 2,8 MTC-SK050-06-080-3-0-A 30261620
50 6 21 27 120 36 10 26 M5 2,9 MTC-SK050-06-120-3-0-A 30261621
50 6 21 27 160 36 10 26 M5 3,1 MTC-SK050-06-160-3-0-A 30261622
50 8 21 27 80 36 10 26 M6 2,8 MTC-SK050-08-080-3-0-A 30261623
50 8 21 27 120 36 10 26 M6 3,0 MTC-SK050-08-120-3-0-A 30261624
50 8 21 27 160 36 10 26 M6 3,1 MTC-SK050-08-160-3-0-A 30261625
50 10 24 32 80 41 10 31 M8x1 2,8 MTC-SK050-10-080-3-0-A 30261626
50 10 24 32 120 41 10 31 M8x1 3,0 MTC-SK050-10-120-3-0-A 30261627
50 10 24 32 160 41 10 31 M8x1 3,3 MTC-SK050-10-160-3-0-A 30261628
50 12 24 32 80 47 10 37 M10x1 2,8 MTC-SK050-12-080-3-0-A 30261629
50 12 24 32 120 47 10 37 M10x1 3,0 MTC-SK050-12-120-3-0-A 30261630
Clamping technology | Clamping tools with ISO
Shrink chucks ThermoChuckShank ISO in accordance with DIN 69871 Form AD/B
Nominal size
ISO
Dimensions G Weight
kg
Specification Order No.
d1 d2 d3 l1 l2 l3 l4
Dimensions in mm.
Continued on next page.
146
50 12 24 32 160 47 10 37 M10x1 3,3 MTC-SK050-12-160-3-0-A 30261631
50 14 27 34 80 47 10 37 M10x1 2,9 MTC-SK050-14-080-3-0-A 30261632
50 14 27 34 120 47 10 37 M10x1 3,1 MTC-SK050-14-120-3-0-A 30261633
50 14 27 34 160 47 10 37 M10x1 3,4 MTC-SK050-14-160-3-0-A 30261634
50 16 27 34 80 50 10 40 M12x1 2,9 MTC-SK050-16-080-3-0-A 30261635
50 16 27 34 120 50 10 40 M12x1 3,1 MTC-SK050-16-120-3-0-A 30261636
50 16 27 34 160 50 10 40 M12x1 3,5 MTC-SK050-16-160-3-0-A 30261637
50 18 33 42 80 50 10 40 M12x1 3,0 MTC-SK050-18-080-3-0-A 30261638
50 18 33 42 120 50 10 40 M12x1 3,3 MTC-SK050-18-120-3-0-A 30261639
50 18 33 42 160 50 10 40 M12x1 3,7 MTC-SK050-18-160-3-0-A 30261640
50 20 33 42 80 52 10 42 M16x1 3,0 MTC-SK050-20-080-3-0-A 30261641
50 20 33 42 120 52 10 42 M16x1 3,3 MTC-SK050-20-120-3-0-A 30261642
50 20 33 42 160 52 10 42 M16x1 3,7 MTC-SK050-20-160-3-0-A 30261643
50 25 44 53 100 58 10 48 M16x1 3,5 MTC-SK050-25-100-3-0-A 30261644
50 25 44 53 120 58 10 48 M16x1 3,8 MTC-SK050-25-120-3-0-A 30261645
50 25 44 53 160 58 10 48 M16x1 4,0 MTC-SK050-25-160-3-0-A 30261646
50 32 44 53 100 62 10 52 M16x1 3,3 MTC-SK050-32-100-3-0-A 30261647
50 32 44 53 120 62 10 52 M16x1 3,8 MTC-SK050-32-120-3-0-A 30261648
50 32 44 53 160 62 10 52 M16x1 4,0 MTC-SK050-32-160-3-0-A 30261649
l1
d 3d 2d 1
l3 l4l2
G
4,5°
Clamping technology | Clamping tools with ISO
Shrink chucks ThermoChuckShank ISO in accordance with DIN 69871 Form AD/B
Nominal size
ISO
Dimensions G Weight
kg
Specification Order No.
d1 d2 d3 l1 l2 l3 l4
Dimensions in mm.
Supply includes: Built-in length adjustment screw with through hole, does not include fine balancing screws or pull stud.
Design: Normal setting Form AD, if Form B is required, please state with the order. Permissible run-out variation on the taper in relation to the clamping diameter d1 = 0.003 mm. The clamping diameter is designed for a shank tolerance of h6.
Note: For tool extensions see page 220. For pull studs see page 224. Length adjustment screw and fine balancing screw available on request.
Balancing quality:
G 2.5 at 16,000 min-1
147
l1
d 3d 2d 1l3 l4
l2
G
4,5°
40 3 10 20 80 22 10 12 M6 0,9 MTC-SK040-03-080-3-0-A 30271294
40 4 15 25 80 26 10 16 M6 0,9 MTC-SK040-04-080-3-0-A 30271295
40 5 15 25 80 30 10 20 M6 0,9 MTC-SK040-05-080-3-0-A 30271296
40 6 21 27 80 36 10 26 M5 1,0 MTC-SK040-06-080-3-0-A 30271297
40 8 21 27 80 36 10 26 M6 1,0 MTC-SK040-08-080-3-0-A 30271298
40 10 24 32 80 41 10 31 M8x1 1,0 MTC-SK040-10-080-3-0-A 30271299
40 12 24 32 80 47 10 37 M10x1 1,0 MTC-SK040-12-080-3-0-A 30271300
40 14 27 34 80 47 10 37 M10x1 1,0 MTC-SK040-14-080-3-0-A 30271301
40 16 27 34 80 50 10 40 M12x1 1,0 MTC-SK040-16-080-3-0-A 30271302
40 18 33 42 80 50 10 40 M12x1 1,1 MTC-SK040-18-080-3-0-A 30271303
40 20 33 42 80 52 10 42 M16x1 1,1 MTC-SK040-20-080-3-0-A 30271304
40 25 44 53 100 58 10 48 M16x1 1,6 MTC-SK040-25-100-3-0-A 30271305
40 32 44 53 100 62 10 52 M16x1 1,4 MTC-SK040-32-100-3-0-A 30271306
Clamping technology | Clamping tools with ISO
Supply includes: Built-in length adjustment screw with through hole, does not include fine balancing screws or pull stud.
Design: Normal setting Form AD, if Form B is required, please state with the order. Permissible run-out variation on the taper shank in relation to the clamping diameter d1 = 0.003 mm. The clamping diameter is designed for a shank tolerance of h6.
Note: For tool extensions see page 220. For pull studs see page 224. Length adjustment screw and fine balancing screw available on request.
Balancing quality: G 2.5 at 16,000 min-1
Shrink chucks ThermoChuckShank ISO in accordance with DIN 69871 Form AD/B
Nominal size
ISO
Dimensions G Weight
kg
Specification Order No.
d1 d2 d3 l1 l2 l3 l4
Dimensions in mm.
Design with 2 cooling duct bores
148
d 1 d 2l1 l2
�
���
�
40 22 48 35 19 1,1 MCA-SK040-22-035-3-0-W 10066833 10066837
40 27 50 35 21 1,1 MCA-SK040-27-035-3-0-W 10066834 10066838
40 32 78 50 24 1,7 MCA-SK040-32-050-3-0-W 10066835 10066839
40* 40 89 50 27 1,9 MCA-SK040-40-050-3-0-W 10066836 10066840
40* 60** 140 70 27 4,3 MCA-SK040-60-070-3-0-W 10011328
50 22 48 35 19 3,1 MCA-SK050-22-035-3-0-W 10073552 10073747
50 27 60 35 21 3,3 MCA-SK050-27-035-3-0-W 10073743 10073748
50 32 78 35 24 3,7 MCA-SK050-32-035-3-0-W 10073744 10073749
50 40 89 50 27 4,3 MCA-SK050-40-050-3-0-W 10073745 10073750
50 60 129 70 40 5,0 MCA-SK050-60-070-3-0-W 10073746 10073751
22 M10 10006016 30326178 MT1013-01 10005640 M4x10 - 12.9 10003583
27 M12 10005164 30326179 MT1215-01 10005165 M4x16 - 12.9 10003586
32 M16 10004065 30326180 MT1422-01 10004063 M5x16 - 12.9 10003601
40 M20 10004066 30326181 MT1623-01 10004064 M5x16 - 12.9 10003601
60 M30 10017544 MT2625-01 10010103 M12x25 - 12.9 10003675
Clamping technology | Clamping tools with ISO
Milling cutter arbors with enlarged face connection diameterShank ISO in accordance with DIN 69871 Form AD/B
Nominal
size
ISO
Dimensions Weight
kg
Specification Order No. with
milling cutter
clamping screw1
Order No. without
milling cutter
clamping screw2d1 d2 l1 l2
Dimensions in mm.
For arbor
diameter
Milling cutter
clamping screw
in accordance with DIN
Milling cutter clamping screw
with internal coolant supply (e.g.
for MAPAL WWS milling heads)
Key block Fastening screw
in accordance with ISO 4762
d1 Size Order No. Order No. Specification Order No. Size Order No.
Dimensions in mm.
Spare parts
Supply includes: 1Attached key blocks and milling cutter clamping screw in accordance with DIN 6367, does not include pull stud. 2Attached key blocks, does not include milling cutter clamping screw or pull stud. Bores for coolant supply in accordance with Form B sealed on delivery with threaded pins.
Design: Permissible run-out variation on the steep taper in relation to the arbor diameter d1 = 0.008 mm.
Note: The sizes marked with * have 4 additional threaded bores for mounting cutter heads with tool fastening in accordance with DIN 2079. **d1 60 mm for nominal size ISO40: maximum milling head diameter D = 250 mm. For assembly tools see page 233. For pull studs see page 224.
Balancing quality: G 2.5 at 16,000 min-1
149
l1
d 2
d 1
l2
30 0,3 - 8 36 73 70 0,7 DCT-08-A MPC-SK030-08-073-0-0-W 30259829
40 0,3 - 8 36 73 70 1,3 DCT-08-A MPC-SK040-08-073-0-0-W 30259830
30 0,5 - 13 50 117 111 1,5 DCT-13-A MPC-SK030-13-117-0-0-W 30259831
40 0,5 - 13 50 96 90 1,6 DCT-13-A MPC-SK040-13-096-0-0-W 30259832
45 0,5 - 13 50 96 90 2,4 DCT-13-A MPC-SK045-13-096-0-0-W 30259833
50 0,5 - 13 50 112 106 4,1 DCT-13-A MPC-SK050-13-112-0-0-W 30259834
40 2,5 - 16 57 101 95 1,8 DCT-16-A MPC-SK040-16-101-0-0-W 30259835
45 2,5 - 16 57 101 95 2,6 DCT-16-A MPC-SK045-16-101-0-0-W 30259836
50 2,5 - 16 57 117 111 4,3 DCT-16-A MPC-SK050-16-117-0-0-W 30259837
Clamping technology | Clamping tools with ISO
Precision-DrillChuckShank ISO in accordance with DIN 69871 Form A without internal coolant supply
Nominal size
ISO
Dimensions Weight
kg
Spare part
code
Specification Order No.
d1 d2 l1 l2
Dimensions in mm.
Usage: For clamping tools with smooth cylindrical shanks.
Supply includes: Does not include sealing disc or coolant tube. Includes hexagonal T-key.
Design: No internal coolant supply.
Note: For spare parts in accordance with spare part code see page 222-223. For pull studs see page 224.
150
l1
d 2
d 1l2
30 0,5 - 13 50 96 90 1,2 DCT-13-A MPC-SK030-13-096-0-0-W 30259838
30 0,5 - 13 50 117 111 1,5 DCT-13-A MPC-SK030-13-117-0-0-W 30259839
30 2,5 - 16 57 101 95 1,4 DCT-16-A MPC-SK030-16-101-0-0-W 30259840
30 2,5 - 16 57 122 116 1,4 DCT-16-A MPC-SK030-16-122-0-0-W 30259841
40 0,5 - 13 50 96 90 1,6 DCT-13-A MPC-SK040-13-096-0-0-W 30259842
40 2,5 - 16 57 101 95 1,8 DCT-16-A MPC-SK040-16-101-0-0-W 30259843
Clamping technology | Clamping tools with ISO
Precision-DrillChuckShank ISO in accordance with DIN 69871 Form A for machining wood without internal coolant supply
Nominal size
ISO
Dimensions Weight
kg
Spare part
code
Specification Order No.
d1 d2 l1 l2
Dimensions in mm.
Usage: For clamping tools with smooth cylindrical shanks.
Supply includes: Does not include sealing disc or coolant tube. Includes hexagonal T-key.
Design: No internal coolant supply.
Note: For spare parts in accordance with spare part code see page 222-223. For pull studs see page 224.
151
l2
l1
d 2
d 1
40 0,3 - 8 36 76 73 1,3 DCT-08-B MPC-SK040-08-076-3-0-W 30259844
40 0,5 - 13 50 96 90 1,7 DCT-13-B MPC-SK040-13-096-3-0-W 30259845
45 0,5 - 13 50 102 96 2,5 DCT-13-B MPC-SK045-13-102-3-0-W 30259846
50 0,5 - 13 50 112 106 3,9 DCT-13-B MPC-SK050-13-112-3-0-W 30259847
40 2,5 - 16 57 101 95 1,9 DCT-16-B MPC-SK040-16-101-3-0-W 30259848
45 2,5 - 16 57 107 101 2,7 DCT-16-B MPC-SK045-16-107-3-0-W 30259849
50 2,5 - 16 57 117 111 4,1 DCT-16-B MPC-SK050-16-117-3-0-W 30259850
Clamping technology | Clamping tools with ISO
Precision-DrillChuckShank ISO in accordance with DIN 69871 Form AD/B with internal coolant supply
Nominal size
ISO
Dimensions Weight
kg
Spare part
code
Specification Order No.
d1 d2 l1 l2
Dimensions in mm.
Usage: For clamping tools with smooth cylindrical shanks.
Supply includes: Does not include sealing disc or coolant tube. Includes hexagonal T-key.
Design: With internal coolant supply.
Note: For spare parts in accordance with spare part code see page 222-223. For pull studs see page 224.
152
l2
d 2
d 1l1
40 0,3 - 8 36 78 73 1,3 DCT-08-A MPC-SK040-08-078-3-0-W 30259851
40 0,5 - 13 50 96 90 1,7 DCT-13-A MPC-SK040-13-096-3-0-W 30259852
45 0,5 - 13 50 102 96 2,5 DCT-13-A MPC-SK045-13-102-3-0-W 30259853
50 0,5 - 13 50 112 106 3,9 DCT-13-A MPC-SK050-13-112-3-0-W 30259854
40 2,5 - 16 57 101 95 1,9 DCT-16-A MPC-SK040-16-101-3-0-W 30259855
45 2,5 - 16 57 107 101 2,7 DCT-16-A MPC-SK045-16-107-3-0-W 30259856
50 2,5 - 16 57 117 111 4,1 DCT-16-A MPC-SK050-16-117-3-0-W 30259857
Clamping technology | Clamping tools with ISO
Precision-DrillChuckShank ISO in accordance with DIN 69871 Form AD/B with internal coolant supply
Nominal size
ISO
Dimensions Weight
kg
Spare part
code
Specification Order No.
d1 d2 l1 l2
Dimensions in mm.
Usage: For clamping tools with smooth cylindrical shanks.
Supply includes: Does not include sealing disc or coolant tube. Includes hexagonal T-key.
Design: With central coolant supply and decentral coolant outlet for tools without coolant ducts.
Note: For spare parts in accordance with spare part code see page 222-223. For pull studs see page 224.
153
l2
l1
d 2
d 1
40 0,5 - 13 57 119 113 1,7 DCT-13-D MPC-SK040-13-119-1-0-W 30259966
40 2,5 - 16 57 124 113 1,9 DCT-16-D MPC-SK040-16-124-1-0-W 30259967
Clamping technology | Clamping tools with ISO
Precision-DrillChuckShank ISO in accordance with DIN 69871 with internal coolant supply
Nominal size
ISO
Dimensions Weight
kg
Spare part
code
Specification Order No.
d1 d2 l1 l2
Dimensions in mm.
Usage: For clamping tools with smooth cylindrical shanks.
Supply includes: Does not include sealing disc or coolant tube. Includes hexagonal T-key.
Design: With internal coolant supply.
Note: For spare parts in accordance with spare part code see page 222-223. For pull studs see page 224.
154
d 1
l3
l2
l1
Clamping technology | Clamping tools with ISO
CFS replaceable head holdersCFS 101 (cylindrical design) with CFS connection, shank ISO in accordance with DIN 69871 with internal coolant supply
Nominal size
ISO
Connection size
CFS
Dimensions Material Specification Order No.
d1 l1 l2 l3
Dimensions in mm.
40 6 7,8 108,4 15 40 Steel CFS101N-06-040-SK40-A-S 30394001
40 8 9,8 108,4 15 40 Steel CFS101N-08-040-SK40-A-S 30394002
40 10 11,8 113,4 20 45 Steel CFS101N-10-045-SK40-A-S 30394003
40 12 15,8 118,4 25 50 Steel CFS101N-12-050-SK40-A-S 30394004
40 16 19,8 118,4 25 50 Steel CFS101N-16-050-SK40-A-S 30394005
40 20 24,8 118,4 25 50 Steel CFS101N-20-050-SK40-A-S 30394006
155
d 1
HSK
-C
l1
30 32 37 40 0,5 KS-AD-SK030-HSK-C032-040-01 30319737
30 40 45 60 0,9 KS-AD-SK030-HSK-C040-060-01 30319738
40 32 37 40 1,0 KS-AD-SK040-HSK-C032-040-01 30319739
40 40 45 40 1,0 KS-AD-SK040-HSK-C040-040-01 30319740
40 50 55 60 1,4 KS-AD-SK040-HSK-C050-060-01 30319741
40 63 70 75 1,8 KS-AD-SK040-HSK-C063-075-01 30319742
45 32 37 40 1,5 KS-AD-SK045-HSK-C032-040-01 30319743
45 40 45 40 1,6 KS-AD-SK045-HSK-C040-040-01 30319744
45 50 55 40 1,8 KS-AD-SK045-HSK-C050-040-01 30319745
45 63 70 60 2,2 KS-AD-SK045-HSK-C063-060-01 30319746
45 80 87 80 3,0 KS-AD-SK045-HSK-C080-080-01 30319747
50 32 37 40 2,7 KS-AD-SK050-HSK-C032-040-01 30319748
50 40 45 40 2,8 KS-AD-SK050-HSK-C040-040-01 30319749
50 50 55 40 2,9 KS-AD-SK050-HSK-C050-040-01 30319750
50 63 70 40 3,0 KS-AD-SK050-HSK-C063-040-01 30319751
50 80 87 80 4,6 KS-AD-SK050-HSK-C080-080-01 30319752
50 100 110 95 6,1 KS-AD-SK050-HSK-C100-095-01 30319753
Clamping technology | Clamping tools with ISO
KS steep taper adaptersShank ISO in accordance with DIN 69871 Form AD
Dimensions in mm.
Usage: For use in the machine spindle for mounting HSK tools.
Supply includes: Complete with standard KS clamping cartridge and stop ring, does not include pull stud.
Design: Permissible run-out variation on the steep taper in relation to the HSK internal taper 0.003 mm.
Note: For clamping cartridges see section on manual HSK clamping units. For stop rings see page 202. For pull studs see page 224.
Balancing quality: G 6.3 at 3,000 min-1
Nominal size
ISO
Nominal size
HSK-C
Dimensions Weight
kg
Specification Order No.
d1 l1
156
d 1H
SK-C
l1
30 32 37 55 0,6 KS-AD-SK030-HSK-C032-055-02 30319754
30 40 45 60 0,8 KS-AD-SK030-HSK-C040-060-02 30319755
40 32 37 55 1,1 KS-AD-SK040-HSK-C032-055-02 30319756
40 40 45 60 1,1 KS-AD-SK040-HSK-C040-060-02 30319757
40 50 55 65 1,4 KS-AD-SK040-HSK-C050-065-02 30319758
40 63 70 75 1,9 KS-AD-SK040-HSK-C063-075-02 30319759
45 32 37 55 1,7 KS-AD-SK045-HSK-C032-055-02 30319760
45 40 45 60 1,9 KS-AD-SK045-HSK-C040-060-02 30319761
45 50 55 75 2,5 KS-AD-SK045-HSK-C050-075-02 30319762
45 63 70 75 2,6 KS-AD-SK045-HSK-C063-075-02 30319763
45 80 87 85 3,4 KS-AD-SK045-HSK-C080-085-02 30319764
50 32 37 55 2,9 KS-AD-SK050-HSK-C032-055-02 30319765
50 40 45 60 3,0 KS-AD-SK050-HSK-C040-060-02 30319766
50 50 55 65 3,2 KS-AD-SK050-HSK-C050-065-02 30319767
50 63 70 75 3,8 KS-AD-SK050-HSK-C063-075-02 30319768
50 80 87 85 4,8 KS-AD-SK050-HSK-C080-085-02 30319769
50 100 110 100 6,3 KS-AD-SK050-HSK-C100-100-02 30319770
Clamping technology | Clamping tools with ISO
KS steep taper adaptersShank ISO in accordance with DIN 69871 Form B
Nominal size
ISO
Nominal size
HSK-C
Dimensions Weight
kg
Specification Order No.
d1 l1
Dimensions in mm.
Usage: For use in the machine spindle for mounting HISO tools.
Supply includes: Complete with standard KS clamping cartridge and stop ring, does not include pull stud.
Design: Permissible run-out variation on the steep taper in relation to the HISO internal taper 0.003 mm.
Note: For clamping cartridges see section on manual HSK clamping units. For stop rings see page 202. For pull studs see page 224.
Balancing quality: G 6.3 at 3,000 min-1
157
G1
l1
G
D
��
30* 60 50 M5 M8x1 AD 0,8 OS-AD-SK030-MOD060-050-11 30319771
30* 60 50 M5 M8x1 B 0,8 OS-AD-SK030-MOD060-050-12 30319772
30* 70 50 M6 M8x1 AD 0,9 OS-AD-SK030-MOD070-050-11 30319773
30* 70 50 M6 M8x1 B 0,9 OS-AD-SK030-MOD070-050-12 30319774
40 60 50 M5 M8x1 AD/B 1,3 OS-AD-SK040-MOD060-050-13 10058658
40 70 50 M6 M8x1 AD/B 1,4 OS-AD-SK040-MOD070-050-13 10058660
40 80 55 M6 M8x1 AD/B 1,7 OS-AD-SK040-MOD080-055-13 10058661
40 100 60 M8 M10x1 AD/B 2,2 OS-AD-SK040-MOD100-060-13 10058662
45 60 50 M5 M8x1 AD/B 2,8 OS-AD-SK045-MOD060-050-13 10058663
45 70 50 M6 M8x1 AD/B 2,9 OS-AD-SK045-MOD070-050-13 10058664
45 80 55 M6 M8x1 AD/B 3,1 OS-AD-SK045-MOD080-055-13 10058665
45 100 60 M8 M10x1 AD/B 3,3 OS-AD-SK045-MOD100-060-13 10058666
45 117 60 M8 M10x1 AD/B 3,5 OS-AD-SK045-MOD117-060-13 10058667
50 60 50 M5 M8x1 AD/B 3,2 OS-AD-SK050-MOD060-050-13 10058669
50 70 50 M6 M8x1 AD/B 3,4 OS-AD-SK050-MOD070-050-13 10058670
50 80 50 M6 M8x1 AD/B 3,6 OS-AD-SK050-MOD080-050-13 10058671
50 100 60 M8 M10x1 AD/B 4,4 OS-AD-SK050-MOD100-060-13 10058672
50 117 60 M8 M10x1 AD/B 4,5 OS-AD-SK050-MOD117-060-13 10058673
50 140 60 M10 M10x1 AD/B 4,7 OS-AD-SK050-MOD140-060-13 10058675
60-80 4 10075355
100-140 4 10075099
40, 45, 50 2 M5x5 10036757
Clamping technology | Clamping tools with ISO
Steep taper adaptersShank ISO in accordance with DIN 69871 Form AD/B
Nominal size
ISO
Module
diameter
D
Dimen-
sion
l1
G G1 Shape Weight
kg
Specification Order No.
Dimensions in mm.
Dimensions in mm.
Usage: For use in the machine spindle for mounting KS flange adapters, shrink chucks, hydraulic chucks, chucks for cylindrical shanks or tools with a modular shank in accordance with MAPAL works standard.
Supply includes: Complete with threaded pins for aligning the radial run-out, does not include pull stud.
Design: * Steep taper size ISO30 is not available in combined design AD/B! Normal setting Form AD, if Form B is required, please state with the order. Due to threaded pins the radial run-out of a connection or tool fitted can be adjusted exactly in relation to the steep taper.
Note: For suitable KS flange adapter in accordance with MAPAL works standard see page 102 and 103. For suitable chucks for cylindrical shanks see page 105. For suitable hydraulic chucks see page 106. For suitable shrink chucks ThermoChuck see page 107. For pull studs see page 224.
Balancing quality: G 6.3 at 3,000 min-1
For module diameter
DQuantity required
Threaded pin
order no.
Spare parts
Dimensions in mm.
For nominal size
ISO
Quantity
required
Threaded pin in accordance with ISO 4026
Size Order No.