CLAMP RACKASSEMBLY INSTRUCTIONSSave time in the shop today with this mobile clamp rack build from Grizzly Industrial Inc. Designed by CEO & Founder of Grizzly Industrial, Shiraz Balolia, this rack ensures you have what you need at an arm’s length. It holds F-style clamps, C-clamps, parallel and tube clamps. This project breakdown features a full material and cut list, overview drawing and list of components found on grizzly.com.

©Copyright Grizzly Industrial, Inc., 2020

CLAMP RACKANATOMIC VIEW

©Copyright Grizzly Industrial, Inc., 2020

BASE (TWO LAYERS OF 1" PLYWOOD SHOWN,MAY BE SUBSITUTED FOR BUTCHER BLOCKOR OTHER SIMILAR MATERIAL)

PANEL BASE FRAME

(FRONT END AND SIDE PANELS REMOVED FOR CLARITY)

SHELF

END PANELSIDE PANEL

LEDGER

TOP BRACE

CLAMP RACKCUT SHEET

©Copyright Grizzly Industrial, Inc., 2020

END PANEL245/8" x 48"

END PANEL245/8" x 48"

123/8"

2 x 4 x 96" (45° CUTS)FOR PANEL

BASE FRAME

2 x 4 x 96"FOR TOP BRACES

AND LEDGERS

48" x 96" x ¾" PLYWOOD

48" x 96" x ¾" PLYWOOD

123/8" 123/8" 123/8"

SIDE PANEL243/8" x 48"

SIDE PANEL243/8" x 48"

SHEL

F12

3 /8"

x 2

43 /8"

BASE245/8" x 36"

BASE245/8" x 36"

123/8"

123/8" 243/8"

243/8"

CLAMP RACKLIST OF ADDITIONAL MATERIALS

©Copyright Grizzly Industrial, Inc., 2020

STEEL ANGLEFOR PANEL BASE 3" X 3" X 3/16" 2 @ 24½"FOR TOP C-CLAMP HOLDER 2" X 2" X 1/8" 2 @ 24½"

CLAMP RACKSHOP FOX D4345 3-PIECE SET AVAILABLE ON GRIZZLY.COM(USED AS-SHOWN IN PHOTO)

CASTERSSTEELEX D2570 4" FIXED CASTERS (MAX. 2) AVAILABLE ON GRIZZLY.COMSTEELEX D2610 4" LOCKING SWIVEL CASTERS (MAX. 2 OR USE 4) AVAILABLE ON GRIZZLY.COM

FASTENERSWOOD SCREWS (1¼" & 2")LAG BOLTS (16) AND WASHERS (32) FOR CASTERSHEX BOLTS (12), WASHERS (24) AND LOCKING NUTS (12) FOR STEEL ANGLE

CLAMP RACKBUILD INSTRUCTIONS PAGE 1 of 4

©Copyright Grizzly Industrial, Inc., 2020

• STACK BASES AND SECURE WITH WOOD SCREWS,AVOIDING CASTER AND PANEL BASE FRAME AREA.

• FLIP BASE OVER. PLACE PANEL BASE FRAME IN CENTER OF BASE AND FASTEN WITH WOOD SCREWS.

• ATTACH CASTERS WITH BOLTS AND WASHERS.

CLAMP RACKBUILD INSTRUCTIONS PAGE 2 of 4

©Copyright Grizzly Industrial, Inc., 2020

• DRILL HOLES IN 3" X 3" STEEL ANGLES.*

• FIT SIDE PANEL AND STEEL ANGLE TO PANELBASE FRAME AND FASTEN WITH BOLTS. REPEAT ON OTHER SIDE.

PANEL BASE FRAME

SIDE PANEL

1½"

2¼"

SIDE PANEL BOLT

BASE

*NOTE:DRILL VERTICAL HOLES 2¼"

FROM BOTTOM EDGE TOPROVIDE CLEARANCE FOR

PANEL BASE FRAME

CLAMP RACKBUILD INSTRUCTIONS PAGE 3 of 4

©Copyright Grizzly Industrial, Inc., 2020

• ATTACH LEDGERS, SHELF, TOP BRACES,AND FASTEN WITH WOOD SCREWS.

• ATTACH END PANELS AND FASTEN WITH WOOD SCREWS.

CLAMP RACKBUILD INSTRUCTIONS PAGE 4 of 4

©Copyright Grizzly Industrial, Inc., 2020

• DRILL HOLES IN 2" X 2" STEEL ANGLES.

• ATTACH STEEL ANGLES TO TOP BRACESAND FASTEN WITH WOOD SCREWS.

• ATTACH CLAMP RACKS WHERE DESIREDAND FASTEN WITH WOOD SCREWS.

Enjoy your newclamp rack!