CLADDING, DECKING AND CONSTRUCTION MATERIALS · Exterior cladding The function of cladding The primary function of cladding is to protect the insulation from rain and mechanical damages

1

Cladding, decking and construction materials

CLADDING, DECKING AND CONSTRUCTION MATERIALS

QUALITY FROM FOREST TO BUILDING


• Exterior cladding • New and improved surface • Rectangular cladding • Single or double rebate cladding • Cladding with tongue and groove • Profiled cladding • Stangeskovene cladding • ThermoWood / heat-treated cladding • Heartwood pine• Rejects – a profitable alternative for self-builders

• AkzoNobel and Jotun – our protective partners• Factory-painted cladding – options• Fitting cladding • Fire retarding treatment

CLADDING SURFACE TREATMENT

Stangeskovene has extensive experience in the production of timber, both for interior and exterior use. This brochure explains the exterior products cladding, decking and construction material. We present our entire product range, from untreated to surface-treated and pressure-impregnated varieties.

OUR QUALITY – YOUR GUARANTEE!

2

p. 18 p. 19p. 20p. 21

p. 4p. 5p. 6p. 8p. 12p. 14p. 15p. 16p. 17p. 24

Focus and accuracy are part of everyday life at the planing mill in Tistedal.


• Modern planing mills • Two brothers with millimetre precision • Value creation based on renewable resources • About the various Stangeskovene businesses • Sales and delivery terms

Stangeskovene is concerned with quality in all aspects of production, and as a purchaser, I prioritise purchasing timber from the best forest districts in Eastern Norway. This in turn benefits our customers.

Martin Bonnerud, timber responsible in Stangeskovene’s forest department

TIMBER FOR CONSTRUCTION STANGESKOVENE

SHORT DISTANCE FROM timber to customerQuality products require high-quality raw material. Our sawmills and planing mills are located in one of the best spruce districts in the Nordic region. Slow-growing spruce is a prerequisite for quality production. Due to the increasingly humid climate, we are experiencing a growing interest in our dense spruce cladding. Slow-growing spruce trees have dense growth rings, giving the wood a higher density (strength). This reduces cracks and increases the lifespan of the cladding.

Locally produced spruce timber from our own forest awaiting transport to our sawmills in Eidskog and Aurskog-Høland.

OUR QUALITY – YOUR GUARANTEE!

3

• Construction materials – spruce and copper-impregnated pine (CU)

• Sub-cladding and impregnated pillars/poles • Impregnated decking and balcony fencing • Window drips and sills

p. 22p. 22p. 23p. 23

p. 24p. 25p. 26p. 26p. 27

4


The cladding is the house’s outer skin, and since the beginning of the 1600s, wood has been the main product in Norway. Wooden cladding has also been the most used product on modern facades.

Exterior cladding

The function of cladding The primary function of cladding is to protect the insulation from rain and mechanical damages. In the old days the cladding also served as the main air barrier in wooden houses, but today this is taken care of by various types of sheet and cardboard. The princi-ple of separate air and rain barriers is called double layer caulking and requires an air cavity between the layers, which is achieved by furring the cladding.

The cladding also plays an aesthetic role and is the construction

detail that affects the building’s appearance the most. Trends change over the years, and most styles have their own cladding types that modern architecture often imitates.

Cladding requirementsToday, spruce is undoubtedly the most common wood species used for cladding. Dense wood with vertical growth rings and the pith facing outwards provides the best quality. Cladding boards from Stangeskovene are delivered with a milled surface.

TYPE OF CLADDING

• Rectangular cladding• Single or double rebate cladding• Cladding with tongue and groove• Profiled cladding• Decorative cladding and cladding with

unplaned edgesThe picture illustrates both vertical and horizontal cladding.

5


NEW!New and improved surface

Stangeskovene has further developed the surface of all its cladding products. Now the surface is planed into a fine homogeneous structure. The smooth surface provides better protection from the ingress of water than before and a more visually pleasing product.

Cleaved surfaces with saw blade sections are more susceptible to the ingress of water..

Newly developed planed surface with the pith facing outwards provides the longest-lasting cladding.

With ThermoWood and heartwood pine the house becomes part of the natural surroundings.

6


TIP:

Rectangular claddingshould preferably be fitted vertically. Vertical cladding, lath cladding or inverted lath cladding are examples of fittings using rectangular cladding (see page 20).

Rectangular cladding

RektangulærDimension

SPRUCE PINE

Packaging informationUntreated

Primed with white AkzoNobel

Primed with coloured

AkzoNobel

Primed + undercoated

with white AkzoNobel

Primed + undercoated with coloured AkzoNobel

CU – impregnated

Nobb no. Nobb no. Nobb no. Nobb no. Nobb no. Nobb no. Apprx. lm/ pkg.

16 x 48 50547764 50547783 1300

16 x 73 21052782 31142268 21728118 49433962 49433977 780

16 x 98 11302742 23056237 21728126 49433981 49433996 25386368 1300

16 x 123 11302759 23056245 21728134 49434000 49434015 1100

16 x 148 11302767 23056252 21728159 49434026 49434034 1000

19 x 48 50375462 50375500 50375515 50375526 50375534 1100

19 x 73 21052808 40438640 21728167 49434045 49434053 800

19 x 98 11302775 23056260 21728175 49434064 49434072 25386400 1180

19 x 123 11302783 23056278 21728183 49434083 49434098 25386418 1000

19 x 148 11302809 23056286 21728209 49434102 49434117 25386426 880

19 x 148 F/S 6,5 m 25537291 40439358 1270

19 x 173 11302817 23056294 21728217 49434121 49434136 25410663 750

22 x 48 50375481 50375674 50375693 50375742 50375965 960

22 x 73 21052816 23056302 21728225 49434140 49434155 25410671 670

22 x 98 11302825 23056310 21728233 49434166 49434174 25410689 1080

22 x 123 21052824 23056328 21728241 49434185 49434193 25410697 860

22 x 148 11302833 23056336 21728266 49434204 49434212 25410705 750

22 x 148F/S 7,2 m 25412347 1200

22 x 173 11302841 23056344 21728274 49434223 49434238 25410713 650

22 x 173F/S 7,2 m 25412354 1040

22 x 198 11302858 23056351 21728282 49434242 49434257 25410721 540

29 x 73 23005416 40438848 44107980 49434261 49434276 1000

29 x 98 21052857 40438855 21728308 49434280 49434295 810

29 x 123 25410747 650

29 x 148 21052881 40438913 21728332 49434306 49434314 25410754 570

29 x 198 21052907 40438954 21728357 49434325 49434333 400

Profil 56

Equal over top panel and sleepers Varying over top panel and sleepers

Panel width in mmOverlap 25 mm total width of over and underlie

i mmOmlegg 25 mm

lm per m2 lm per m2

98 13,70 196 (8”) 6,85

123 10,20 221 (9”) 5,85

148 8,13 246 (10”) 5,10

173 6, 76 271 (11”) 4,52

198 5, 78 296 (12”) 4,07

223 5,05 321 (13”) 3,69

TømmermannskledningCover width Calculated number of metres of each dimension per m2

Coloured nobb no. = stocked, other items for order.

7


Smooth weatherboard, 21 x 170, on a cabin in Røsneskilen/Halden.

Boathouses on the Swedish West Coast with traditional vertical cladding.

Vertical 19 x 123, iron vitriol cladding on a cabin. Exterior rustic w/coves, 19 x 120 on Heiderød Farm in Halden.

8


Single or double rebate cladding

Dimension

SPRUCE

Coverage

PINE




AkzoNobel




CU – impregnated

Nobb no. Nobb no. Nobb no. Nobb no. Nobb no. Lm/m2 Nobb no. Apprx. lm/ pkg.

19 x 123 48056975 48056994 48057013 49434957 49434961 9,5 1000

19 x 148 43946681 43946783 44199464 46460593 49434976 7,7 25410846 880

19 x 173 43946802 44199498 44199502 49434980 49434995 6,5 750

Profil 57Dobbelfals 28 GR

Our product range includes both single and double rebate cladding. One of the benefits of this type of cladding is the short time it takes to fit the boards. The rebate width is 18 mm on all varieties.

Double rebate cladder 19x148 without bead are the most common cladding in Eastern Norway today.


9


Dimension

SPRUCE

Deknings- mål




AkzoNobel




Nobb no. Nobb no. Nobb no. Nobb no. Nobb no. Lm/m2 Ca. lm/pkg.

19 x 123 49434586 49434594 49434605 49434613 49434624 9,5 1000

19 x 138 26018762 44075636 44141466 49434632 49434643 8,3 880

19 x 148 26018770 44075640 44141606 49434658 49434662 7,7 880

19 x 173 49434696 49434700 49434715 49434726 49434734 6,5 750

Profil 60Weatherboard

Dimension

PINE

Deknings-mål




AkzoNobel




Nobb no. Nobb no. Nobb no. Nobb no. Nobb no. Lm/m2 Ca. lm/pakke

19 x 123 48056892 48056941 48056956 49435033 49435044 9,5 1000

19 x 148 11302908 23056427 49435052 49435063 49435078 7,7 880

Profil 70

Dobbelfals 60 GR

Dimension

PINE

Deknings-mål




AkzoNobel




Nobb no. Nobb no. Nobb no. Nobb no. Nobb no. Lm/m2 Ca. lm/pkg.

19 x 148 43946726 43946764 44199472 49435006 49435014 7,7 880

19 x 173 48057043 49436573 49436584 49435025 49435173 6,5 750

Profil 58

Dobbelfals 28 GR m/perle

Double rebate, 19 x 148, 28 degrees angled. Double rebate, 19 x 148, 28 degrees beaded.


10


Kråkerøy

Dimension

SPRUCE

Coverage Packaging informationUntreated



AkzoNobel




Nobb no. Nobb no. Nobb no. Nobb no. Nobb no. Lm/m2 Apprx. lm/ pkg.

19 x 123 48056661 48056676 48056733 49434416 49434420 9,5 1000

19 x 148 43939798 44075360 44192714 49434435 49434446 7,7 880

Profil 61

Kråkerøy 3’’ spor

Dimension

SPRUCE

Deknings-mål




AkzoNobel





19 x 148 51933503 51933518 51933522 51933658 51933662 7,7 880

Profil 84

Låvekledning (Dobbelfals tett)

Dimension

SPRUCE




AkzoNobel





19 x 98 51933537 51933541 51933556 51933560 51933575 12,5 1000

19 x 123 51933586 51933594 51933505 51933513 51933524 9,5 840

19 x 148 50377252 50377263 50377278 50377282 50377297 7,7 880

19 x 173 51933632 6,5 630

22 x 198 51933643 5,6 540

Profil 80

Dobbelfals 3’’ spor

Dimension

SPRUCE




AkzoNobel





19 x 148 44143744 44234986 44235005 49435082 49435097 7,7 880

Profil 72

Single or double rebate cladding cont.


11


Dimension

SPRUCE




AkzoNobel





19 x 135 43932064 49436342 49436357 49436361 49436376 880

Hattepanel

Profil 75

Dimension

SPRUCE




AkzoNobel





19 x 123 53089623 53089638 53089642 53089657 53089661 9,5 1000

19 x 148 27879436 43894245 49436380 49436395 49436406 7,5 880

BuerkledningProfil 71

Dimension

SPRUCE




AkzoNobel





19 x 123 48056661 48056676 48056733 49434416 49434420 9,5 1000

19 x 148 43939798 44075360 44192714 49434435 49434446 7,7 880

Dimension

SPRUCE

Deknings-mål




AkzoNobel





19 x 148 51933503 51933518 51933522 51933658 51933662 7,7 880

Hattepanel can be mount between rectangular cladding.

Barn cladding (double rebate dense), 19 x 148, primed white.


12


Dimension

SPRUCE




AkzoNobel





19 x 120 26018861 44075674 44191745 49434522 49434745 9,1 1000

19 x 145 26018887 44075738 44199483 49434537 49434753 7,4 880

Dimension

SPRUCE




AkzoNobel





22 x 120 26019026 44227725 44227797 49434352 49434363 9,1 860

22 x 145 26019034 44227854 44228024 49434378 49434382 7,4 750

HorisontalProfil 63

Dimension

SPRUCE




AkzoNobel





19 x 95 26018846 44075666 44190818 49434454 49434465 11,8 1150

19 x 120 26018853 44075712 44191658 49434473 49434484 9,1 1000

19 x 145 26018879 44075723 44192725 49434492 49434503 7,4 880

Sveitser m/enkel perle

Profil 64

Profil 65

Sveitser m/dobbel perle

Dimension

SPRUCE




AkzoNobel

Primed + undercoated with white AkzoNobel



19 x 120 26018986 44199184 44199192 49436285 49436293 9,1 1000

19 x 145 44237805 44237934 44237945 49436304 49436312 7,4 880

19 x 170 26018994 44199517 44199521 49436323 49436338 6,3 750

Vestlandskledning Profil 59

Cladding with tongue and groove

The picture illustrates a 19 x 120 Swiss style cladding.

We have the widest range of tongue and groove system cladding on the market. The grooves are 10 millimetres deep on all variants.


13


Rustikk m/hulkil

Dimension

SPRUCE

Coverage

PINE




AkzoNobel




CU – impreg-nated


14 x 120 26016709Glatt

52562035Glatt 9,1 1200

Dimension

SPRUCE

Coverage

PINE




AkzoNobel




CU – impreg-nated


19 x 120 26018937 26058735 44082216 49435101 49435116 9,1 1000

Profil 62

Profil 3

Dimension

SPRUCE

Coverage

PINE




AkzoNobel




CU – impreg-nated


19 x 120 26019612 44075761 44141784 49435146 49435154 9,1 1000

Rustikk rundProfil 79

Dimension

SPRUCE

Coverage

PINE




AkzoNobel




CU – impreg-nated


18 x 120 26018945Glatt 44075742 44191026 49436240 49436255 9,1 1000

19 x 120 26018952Ru 44075757 44191556 49436266 49436274 9,1 1000

Utvendig faspanel Profil 66

Dimension

SPRUCE

Coverage

PINE




AkzoNobel




CU – impreg-nated


21 x 120 – – – – – 9,1 40919953 700

Kragerøkledning

Skygge skrå (glatthøvlet)


14


Profiled claddingStangeskovene offers two varieties of profiled cladding boards. These boards are usually used toget-her with rectangular sleepers. The choice of depth and width of both sleepers and top panels affects the shadow effect of the cladding.

Empire

Profiledcladding

SPRUCE

UntreatedPrimed


Primed with

coloured AkzoNobel




Dimension Nobb no. Nobb no. Nobb no. Nobb no. Nobb no.

22 x 45 26053611 44199536 44199540 49436414 4943642522 x 70 48057058 49436433 49436444 49436452 4943646329 x 70 53090126 53090134 53090145 53090153 53090164

Profil 69

Cladding with unplaned edges

DimensionSPRUCEUntreatedNobb no.

22 x 98 4553320622 x 123 4553321422 x 148 45533225

Rectangular beaded

Profil 76

Decorative cladding

BarokkProfil 67

Profiledcladding

SPRUCE

UntreatedPrimed


Primed with

coloured AkzoNobel




Dimension Nobb no. Nobb no. Nobb no. Nobb no. Nobb no.

22 x 70 26018960 44226923 49436478 49436482 4943649729 x 70 26018978 44226484 44226492 49436501 49436516

DimensionPINE

Nobb no.

24 x 200 40897233

Profil 81




15


NEWS!

DimensionPINE

Nobb no.

24 x 200 40897233

Stangeskovene cladding is a newly developed horizontal, more long-lasting cladding. This cladding timber has dense, vertical growth rings and is supplied with the pith facing outwards. It comes complete with two coats of protective system treatment. At 21 x 148, the cladding dimension is thicker than the standard version and comes with a saw-cut surface like our other cladding varieties.

Stangeskovene cladding- Longer life

Stangeskovene cladding

Dimension

SPRUCE

Systemtreated 2 coats, white

Nobb no.

21 x 148 52891894

Profil 85

Stangeskovene cladding is characterised by:

• Thicker than standard double rebate cladding• Newly developed surface (saw-cut)• Dripstone to prevent rotting• Planed from sorted, locally produced spruce timber• Grooved, angled edges to avoid flaking

• Board with pith facing outwards• High proportion of vertical growth rings• Better durability against rot• Affordable and time-saving• Stocked in standard white. Other colouring options

delivered on request

• Ensure proper furring.• Fitted like standard double rebate cladding.• End section and cut surfaces treated with Visir

immediately after fitting.• Top coat applied as soon as possible, and no

later than two years after fitting.

Fitting and finishing

+ + + Final coat painted by the home-owner

RECOMMENDED


16


ThermoWood is tempered wood for decking and cladding. Stangeskovene produces tempered pine cladding in the “Architect Planer” at Bjørnstad Bruk. The product is a beautiful reddish brown and the

velvety smooth surface gives a nice, warm feeling.

Thermowood- from nature to your home

Many choose to fit this cladding untreated. Due to UV rays from the sun as well as changing weather conditions, factors such as stain fungus will in time make ThermoWood turn grey. Under elevated temperatures of approx. 200 ºC, the raw material dries down towards 0 % humidity, causing the cell structure in the wood to change. Water vapour is then applied, so that the wood holds a humidity level of 6 %. This makes the wood more dimensionally stable, ensuring very little shrinkage and arching and a higher moisture and rot resistance. This product is very environmentally friendly and basically maintenance-free. However, regular cleaning must be expected.

DimensjonPINE

Nobb nr.

20 x 140 50377316

PINE Dobbelfals 60 GR THERMO

FITTING AND MAINTENANCE

• Fitted with stainless or acid resistant screws.• Cleaned with soap and water.• Avoid lasting contact with soil/water.• ThermoWood can be surface treated with oils to

preserve the glow or achieve the desired shade. Osmo products are recommended.

• Follow the instructions from the manufacturer.• Split or in other ways damaged boards must be

replaced immediately.

Tempered cladding at the Ulsmåg school in Bergen. Naturally grey from wind and weather. Photo: Bergen municipality.

Apartment project with newly fitted cladding. This cladding will turn grey over time.

In ou

r “Arch

itect

Planer”

,

every

thing

is po

ssibl

e!


HEARTWOOD PINE - nature’s own impregnation

17

The service building at the Tistedalen Ski Resort is clad with iron vitriol treated heartwood pine with a profile variety called “Femsjø”, with a dimension of 22 x 123.

A few decades ago the forest owner went into the forest and marked the trees based on quality and the need for planks or their purpose. The really old pine trees with lots of heartwood were used as window

frames or cladding.

Stangeskovene produces cladding from heartwood pine to order in our “Architect Planer” at Bjørnstad Bruk. The raw material consists of 90 % heartwood. The customer chooses the finish; traditional stain/paint, iron vitriol treatment or simply leaving the cladding untreated. Over time untreated cladding will turn grey, while iron vitriol treatment accelerates this process. The disadvantage of pine is the resin discharged from the knots. The resin will “bleed” through oil and stain, whereas in solid treatments the resin will be stuck under the paint and may cause the surface film to blister and chip. Such reactions from the knots can be avoided by choosing non-solid treatments, i.e. transparent stain or iron vitriol treatment.

Stangeskovene produces heartwood pine cladding according to the customer’s profile and volume/requirements at Bjørnstad Bruk in Tistedal.

18

OUR PROTECTIVE PARTNERS

Primed claddingWe have developed our cladding varieties with a planed surface, grooved sides and angled edges to provide a better grip for stain and paint. We use AkzoNobel’s CUPRINOL IP 601 as indus-trial primer on standard products.

AkzoNobel’s CUPRINOL IP 601 is a water-based primer with top-quality alkyd/oil. This product is a waterproof treatment that protects the wood against decomposition due to UV light, mould and algae.

Priming is done indoors under controlled conditions on high-quality wood and with low moisture. Application amounts and other important parameters are continuously checked.

Priming ensures good protection during transport and con-struction and provides optimal conditions for the complete paintwork to function as intended throughout the life of the cladding.

Primed cladding always requires two top coats by brush. It is advisable to apply the first coat before the cladding is fitted.

Cladding with primer and undercoatTo provide optimal protection, the cladding should be treated in three steps: primer, undercoat and top coats. With Cuprinol un-dercoat, the job is almost done and a lot of time saved! The exterior cladding only requires one top coat to be painted by the homeow-ner after it has been fitted.

Paint job completed by the homeownerThe paint job should be completed as soon as possible, and prefera-bly during the first season after painting. Overpainting can be done using products fit for purpose, such as water-based acrylic paint or alkyd-based products.

Follow the recommendations of the paint manufacturer when completing the paint job. Untreated surfaces such as cut surfaces, damages etc. must be treated with a complete paint system, i.e. im-pregnating base oil (substantial amounts), priming and top coats.

Stained cladding (transparent)Stain highlights the structure of the wood and gives it a natural and transparent surface. Stained cladding from Stangeskovene is primed with “Jotun Industry Visir” and “Jotun Industry Trebitt Beis” (stain).

“Jotun Industri Trebitt Beis” (stain) provides solid protection, has strong colour and glass durability and looks great. It is recommended that you apply one coat by brush during the first season of the stain.

Stained cladding comes in many colours following the NCS coding system.

FABRIKKMALT KLEDNING

Beste kvalitet // Beste beskyttelse // Spar tid // Enklere byggeprosess

GRUNNING + FØRSTE STRØK FERDIG PÅFØRT

GJØR ET SMART

VALG!

Stangeskovene uses products from AkzoNobel and Jotun for industrial surface treatment.

The special cladding “Kråkerøy” with 7 mm column treated with iron vitriol.

Factory treated cladding- Options

Product and colour schemes

TRANSPARENT STAIN

SOLID PAINT

Primer

Primer

Primer

Undercoat

Undercoat

Top coat

Top coat

Top coat

+

+

+

+

+

+

(Undercoat and top coat during the first season)

(Top coat during the first season)

(Undercoat and top coat during the first season)

Your benefits

• Time and cost effective.• The cladding is protected from the beginning.• The paint is applied under optimal conditions.• Can be fitted regardless of the weather and time of year.• You avoid shrink lines and overlapping rot.• Provides the best basis for further treatment.

You choose the surface treatment of your cladding and the amount of own work. Remember to specify the colour code (NCS code).

.

End sections and

cut surfaces must

be treated with Visir

immediately after

fitting..

REMEMBER

Top coat

19

20


FITTING CLADDINGNailing the Cladding

Inverted lath cladding Tømmermannskledning

Lath cladding Cladding with tongue and groove

TIP: Avoid nailing close to the pith of the sleeper and top panel. Siberian Larch facades must be fitted using hot galvanized screws. ThermoWood facades must be fitted using stainless or acid resistant screws.

Vestland Horizontal cladding with tongue and grooves

Weatherboard Dobbelfals28 grader

Dobbelfals60 grader

Enkelfals Empire

TIP: Avoid height differences by marking every sixth plank row to achieve the same result in corners and around windows and doors. This applies to all varieties of horizontal cladding.

Vertical cladding

Horizontal cladding

21


The best protectionFactory-painted cladding provides the best basis for longevity. Primer and/or undercoat applied under optimal conditions giving an attractive result. Fitting is done regardless of the time of year, and the cladding is fully protected from day one. You also avoid shrink lines and overlapping rot.

Save timeFree up valuable time by choosing factory-painted cladding, which gives you more time to coordinate and plan the construction process. If you choose to buy cladding complete with primer and undercoat, you only need to apply the last coat yourself.

Save moneyEven though factory-painted cladding is more expensive, you can still save money overall. The paint job is made easier, buying you more time.

FinishingOnce the cladding has been fitted, you must remember to finish cut surfaces and end sections. The top coat should be applied during the first season. Surface moisture must be below 16 %, and the surface clean and free of fouling.

Factory-painted cladding in the desired colourContact your local builder’s merchant for ordering factory-painted cladding. The cladding is primed and the first coat of paint applied in the desired colour. There is a short lead time for factory-painted cladding from the vendor. Remember to bring the desired colour code when ordering the cladding.

What do we stock?Stangeskovene stocks most cladding varieties in primed white, as well as most common cladding varieties in primed white and with a white undercoat. Factory-painted cladding in other colours has a very short lead time.

A SMART CHOICE– when building a new house or replacing your cladding

FIRE RETARDING TREATMENTStangeskovene offers cladding treated with fire retardant. This is often requested for public projects in the health and education sector. A separate fire safety certificate is issued as documentation.

NEWS!

22


CONSTRUCTION MATERIALSSPRUCE PINE

CU-impregnatedRandom lengths

Length package F/S Random

lengthsLength

package F/S

Profile name Quality Dimension Nobb no. Nobb no. Nobb no. Nobb no. Nobb no. Nobb no.

Justert K-virke C18 30 x 148 26019075

C24 36 x 98 11303591 41783015

C24 36 x 123 11303609

C24 36 x 148 11303617 45177837 41783026

C24 36 x 198 11303633 42807081

C24 48 x 98 11303641 45177841 42807183 45177474

C24 48 x 123 11303658 42807145

C24 48 x 148 11303666 45177856 21173406(6,5 m) 42807134 45177485 41955480

(7,0 m)C24 48 x 173 11303674 42807100

C24 48 x 198 11303682 45177860 21173463* 42807164 45177493 41955525 (7,0 m)

C24 48 x 223 11303690 21173497(6,5 + 7,5 m) 42807126

C24 73 x 148 42807172

C24 73 x 198 42807198

Boks C24 98 x 98 11303583 42807217

C30 36 x 98 21054002

C30 36 x 123 11303732

C30 36 x 148 11303740

C30 36 x 173 11303757

C30 36 x 198 11303765

C30 36 x 223 21054010

C30 48 x 98 11303773

C30 48 x 123 11303781

C30 48 x 148 11303799

C30 48 x 173 11303807

C30 48 x 198 11303815

C30 48 x 223 11303823

C30 73 x 148 21054192

C30 73 x 198 11303849

C30 73 x 223 11303856

Construction materials - spruce and copper-impregnated pine (CU)

The tables below show the varieties we stock of spruce and CU- impregnated pine.

Sub-panelling Grooved boardsSPRUCE

Profile name DimensionRandom lengths

Nobb no.

Sub-panelling 14 x 120 26017566

14 x 145 26017574

18 x 120 26017582

18 x 145 26017590

21 x 120 26017616Grooved boards 34 x 95 45469340

45 x 120 45469366

Profil 20

Sub-panelling and impregnated pillars/polesPINE CU-impregnated

Profile name Dimension/length Nobb no.

Pillars 10 cm/6m 25447632

14 cm/6m 25447699

16 cm/6m 25447723

18 cm/6m 42158003

Poles 6 cm/1,75 m 23303795

8 cm/1,75 m 23303787

10 cm/1,75 klyv 23303803

CONSTRUCTION MATERIALSSPRUCE

PINECU-

impregnated

Random lengths

Random lengths

Profile name Quality Dimension Nobb no. Nobb no.

Lekt/Rekke KL 1 11 x 36 11302585 25411257

KL 1 16 x 36 26019067

KL 1 16 x 48 21052741

KL 1 19 x 36 48057077

KL 1 23 x 36 11302601

KL 1 23 x 48 11302619 25411273

KL 1 30 x 48 11302627 23401656

KL 1 36 x 48 11302643 25411299

KL 1 36 x 68 11302650

KL 1 36 x 73 11302668 25411307

KL 1 48 x 48 11302676 25411315

KL 1 48 x 68 11302684

KL 1 48 x 73 11302692 25411323

KL 1 73 x 73 11302700 25414301

Trekantlekt 48 x 48 26019059Justert

Forskalling Forskalling 16 x 98 26019109

Forskalling 22 x 98 21695994



Uhøvlet Forskalling 19 x 75 26053629



Uhøvlet Boks 125 x 125 26019323

Boks 150 x 150 26019331

*Available in set lengths: 6 - 6,5 - 7 - 7,5 - 8,5 m.

23


PINE CU-impregnated

Profile name Dimension/length Nobb no.

Pillars 10 cm/6m 25447632

14 cm/6m 25447699

16 cm/6m 25447723

18 cm/6m 42158003

Poles 6 cm/1,75 m 23303795

8 cm/1,75 m 23303787

10 cm/1,75 klyv 23303803

CU-IMPREGNATEDFURU

Random lengths Length package

Dimension Nobb nr. Nobb nr.

21 x 95 25410911

28 x 95 25410952

28 x 120 25410978 45177576

CU-IMPREGNATEDFURU

Random lengths

Dimension Nobb no.

34 x 145 25411000

Impregnated decking and balcony fencing

Window drips and sills

CU-terrasse Altanrekke

Duo brun Royal terrasse Uno grå Royal terrasse

CU-brun

DimensionSPRUCE PINE

CU-impregnatedNobb no. Nobb no.

45 x 95 48338583 25411042



48 x 123 43965112

Window drips Sills - profiled

DimensionSPRUCE

Nobb no.

58 x 83 26017640



45 x 70 21081575

Window drips - profiledWindow drips



45 x 70 25411034



40 x 70 26017632

Window drips Window drips - profiled

ROYAL-IMPREGNATED

FURU

Random lengths

Dimension Nobb nr.

28 x 120 43983274

28 x 145 43983376

ROYAL-IMPREGNATEDFURU

Random lengths

Dimension Nobb no.

28 x 120 47258521

28 x 145 47258536

CU-IMPREGNATED BROWN

FURU

Random lengths

Dimension Nobb no.

28 x 120 51739153

Profil 55

Profil 55

Profil 82

Profil 54

Profil 53

Profil 83

En rillet og en glatt side.

En rillet og en glatt side.

24

24

Most internal and external products are milled in Tistedal. The panelling mill has been significantly developed in recent years with equipment such as a computer-controlled planer, complete tools for bar code labelling and foiling timber bundles. Internal panelling and external cladding is planed from the best raw materials of spruce and pine on the market.

Most of the speciality products are produced at the project planing mill – often in short sequences. This planing mill is often referred to as the Architect Planer. As our customer, you can have products milled especially based on your choice of profile, and surface treated in the colour of your choice. Other wood species are also milled on special request.

In the cutting facility, materials are cut to exact lengths to the customer’s specifications. In practice, this could be the entire package of materials for a house.

Stangeskovene’s production company, Bjørnstad Bruk in Tistedal, consists of two planing mills and a separate sawing facility.

Master planer Brian Buurskov is preparing tools for special-ity planing to the customer’s specifications.

Production planner Leif Henrik Moen is the customer’s point of contact for speciality planing or reject /2nd sort.

REJECTS- A profitable alternativeOur planing mills practice a very strict quality sorting system. An almost insignificant error or damage means that the plank is sorted as a reject / 2nd sort. Most walls have a door or a window where the plank need to be cut before it can be fitted. Customers who want to clad their walls themselves can save a lot of money by purchasing rejects / 2nd sorts and sort/cut away lengths with small defects. Contact your production planner if you want these products.

MODERN PLANING MILLS

25

Bjørnstad Bruk is lucky in that respect. Brothers Lars and Torfinn Bønøgård have been employed here since they were school boys. Both have achieved their certificates of completed apprenticeship at the mill after working here through all their school holidays since the mid-80s. Lars has risen through the ranks and is now technical production manager, running production at two planing mills. One of his main tasks is sharpening planing tools and setting machines before planing. These kinds of settings are accurate down to a thousandth of a millimetre.

What has made you stay for so long at Bjørnstad Bruk?

“Mainly the great working environment and working in a company with a long-term mindset. No working day is the same. I am motivated by constant new challenges and future-oriented develop-ment of quality products adapted to the customers’ needs.”

Today Torfinn is sales and logistics responsible for the company’s key acco-unts. He has gone from being a sorter at the planer via main forklift driver and production planner. Torfinn still has a hand i both raw material purchasing and determining production plans.

“Yes, unfortunately”, Lars exclaims. We need to try to avoid letting a sales person too far in to the production aspect of the

business, because I am measured based on the number of metres going through the planer every day! “The customer decides”, Torfinn replies, “but I am fully aware that we need to find a balance between production efficiency and delivery time. Our advantage is that our direct contact with the end customer enables us to quickly adapt the products to the customer’s requirements.”

For several years Torfinn has also been an employee representative towards the Executive Board.

– “An interesting job, and very pleasing to have long-term owners”, Torfinn conclu-des before getting into his car on his way to see new customers.

Employee knowledge and interest is crucial for a company to succeed in manufacturing quality products from spruce and pine in a planing mill.

TWO BROTHERS WITH

millimetre precision

25

Brothers Lars (left) and Torfinn Bønøgård are key persons at Bjørnstad Bruk in Tistedal. They run production and sales.

26

An important principle in the business operations of the company is independent profit centres and extensive delegation of responsibility and authority to where value creation takes place. This has provided a basis for a healthy financial situation, a strong commitment to the workplace among all employees, and a rational and flexible organ-isation. Pride, a sense of ownership in the business and extensive professional expertise characterises our employees.

The forests are the basis of the Stangeskovene value chain, but pro-duction and retail constitute the main part of our overall revenue.

With such diverse activities and varied work tasks, the company

must incorporate a broad set of skills and master vastly different forms of operation – from long-term management of forest and property resources to pure trading activities in a competitive mar-ket. This requires various skills and different types of people, which combined make up a powerful resource both for the company and our customers. As a goods and services provider, we are at our best when we contribute to increased productivity and profitability with the customer, while also inviting our customers and partners to join us in an interesting and stimulating professional environment.

CEOErik Toverud

Stangeskovene creates value based on the renewable resource wood, and we work across the entire value chain; from forest to building. The company has longstanding traditions and the owners’

long-term perspective forms the basis for constant ongoing development.

Stangeskovene AS is the owner and manager of 226,000 decare of forest. Operations include regular forestry, permissions for hunting moose and small game, cabin rental and fishing tour-ism. In addition, external services are carried out for other forest owners in the form of forestry, timber purchasing, silviculture and management of outlying land.

Stangeskovene is joint owner (51 %) of Eidskog Stangeskovene AS (ESAS), in conjunction with Eidskog municipality. ESAS has two sawmills; at the Vikodden and Eidskog divisions. In addition, ESAS has a planing line in Eidskog.

FOREST AND ESTATE MANAGEMENT SAWMILLS

Processing of sawn timber takes place at three planing mills in the group. At Bjørnstad Bruk in Tistedal, the production of panelling, cladding and special products takes place on two planing lines and one cutting facility (precut). K. Kværner at Kløfta produc-es mouldings on two planing lines, while the planing mill at Eidskog Stangeskovene mainly produces construction timber and cladding on one line. In addition, casing is produced by special order for the contractor and industrial markets at Hemnes in Aurskog-Høland. Production at all of the divisions targets the Norwegian marked, mainly in eastern Norway.

PLANING MILLS AND PRECUTYou can find our timber products at selected dealers all over southern and eastern Norway, or in one of our eight fully or part-ly owned retail outlets. Contact one of our sales representatives, and you will be guided to the nearest dealer.

OUR DEALERS

VALUE CREATION - based on renewable resources

27

SALES AND DELIVERY TERMS1. GENERAL These terms of sale apply to all offers and sales from Stangeskovene Tistedal AS and Bjørnstad Bruk Industri AS (hereinafter referred to as “the Supplier”), unless otherwise agreed with the customer.

This Agreement is complemented by NS 8409:2008 in cases where the purchaser is not the consumer.

We reserve the right to change our sales and delivery terms without notice.Special agreements may deviate from the above-mentioned provisions.

2. SALES AGREEMENTSAn offer from the Supplier shall be valid for 30 days, unless otherwise specified. Upon ordering, the receiver of the offer has accepted the terms provided in the offer. The Supplier’s order confirmation shall be considered an agreement for the purchase. The order confirmation is considered accepted by the buyer if no written objections are provided the Supplier within 1 (one) business day following the buyer’s receipt of the order confirmation.

Cancellations must be made in writing and in good time prior to delivery. The Supplier reserves the right to claim costs covered if this has financial consequences.

All information provided in catalogues, price lists, web pages and ads are advisory. This information is only binding for the Supplier if reference is made to the above-mentioned information in the order confirmation.

3. PRICESAll prices of construction materials and timber are in accordance with our prevailing price lists. Timber prices are in accordance with NOBB excl. discounts and VAT. The agreed price for the item shall be disclosed in the order confirmation. All prices are quoted in NOK excl. VAT.

The applicable price on the delivery day shall apply for purchased items unless otherwise agreed in advance. All prevailing price lists are subject to possible printing errors.

Pick/packaging splits on preparation orders are invoices up to NOK 450 per item line.

Readjustment fee NOK 2,800 for special planing. This fee shall be applicable for ordering “non-standard”* timber according to our product range. Orders under 500 m with surface treatment are invoices including the readjustment surcharge. This is pro tem NOK 1000 + VAT *or stock item.

The NCS colour code must always be provided when ordering special colours.

4. SHIPPING COSTSDeliveries that do not meet the requirement for minimum quantity per destination (acc. to agreement) incur shipping costs. The prevailing minimum shipping rate is pro tem NOK 600 + VAT.

5. DELIVERY TERMSItems are delivered ex works Tistedal. Other delivery terms shall be agreed in writing. Distribution of liability/risk is done according to Incoterms 2000. For transportation, refer to our prevailing price list for transport or any special agreements made. Direct delivery from locations other than Tistedal are invoiced separately.

Responsibility for the item is transferred from seller to buyer when delivered. Beyond this, transfer of risk is regulated in the Sale of Goods Act, Chapter III. Any transport damages shall be addressed with the carrier directly and noted on the bill of lading / packing slip.

6. DELIVERYThe order confirmation is the basis for the delivery of the following items. Article type, quantity, delivery time and delivery location. Any special specifications required for the order shall be given in writing by the buyer.

7. DELIVERY TIMEStandard items included in the assortment are delivered according to the delivery time given in the order confirmation. For non-standard items, a longer delivery time must be expected. Stocked items are shipped within 0–4 working days after the item is reported ready for shipment. However, this is subject to additional delivery time. Order items are delivered according to agreement. 8. TERMS OF PAYMENT All payments from businesses are usually processed within 30 days net after the item has been reported ready for pick-up / delivery, unless otherwise agreed in writing.

Consumer sales shall be paid in cash unless a customer account is created with following the corresponding credit checks.

The Supplier may require advance payment or security for payment before delivering goods.

9. DEFAULT INTERESTAfter the due date, the prevailing default interest will be charged according to the Act relating to Interest on Overdue Payments, etc., Sections 2 and 3. The late payment fee is set according to the prevailing debt collection rate.

10. DELAYThe Supplier is bound by the delivery time provided in the order confirmation. If the Supplier does not deliver by 10 (ten) days after the confirmed delivery date and the reason for the delay is due to circumstances for which the Supplier is responsible, the buyer may terminate the agreement. The Supplier is obligated to without undue delay give notice of the delay and confirm a new delivery date. Regardless of whether or not the buyer terminates the purchase, the buyer may not make any further claims for the Supplier to remedy the delay.

11. SECURITY FOR UNPAID PURCHASEThe Supplier has security for unpaid purchase in the delivered item lot until the delivered lot is paid in full. The security for unpaid purchase shall include interest and any expenses incurred due to delayed payment.

12. RETURNSItems may only be returned following prior agreement with the Supplier’s sales department. Only 100 % marketable, whole and unused items according to the standard item range are accepted as returns. The packing slip or invoice number must be provided in order to enable the Supplier to accept returned items. The return fee is calculated of up to 15 % of the invoice value of the item, and a minimum of NOK 400, in addition to any return shipping in the event of pick-up. If the item is returned due to an error with the Supplier, no return fee or shipping will be charged.

Non-stocked items or custom items are not accepted as returns.

13. CLAIMS AND DEFICIENCIESThe buyer shall check that the delivered item lot is according to the packing slip, and undamaged. Deficiencies or visible defects on the delivered item lot must be reported in writing to the Supplier no later than 2 (two) business days following receipt of the items. Any claims on items that have been put to use or fitted will be rejected unless the defect could not have been detected before installation. If the item has significant defects that can be attributed to the Supplier, the Supplier may choose between giving a discount, terminating the purchase with a full refund of the applicable item lot or delivering new items according to a new order.

The buyer may not claim costs covered other than the costs related to the value of the delivered item lot. The buyer may not claim compensation for direct or indirect damages or losses or consequential losses, or make any other claims in the event of item defects or deficiencies. A claim does not entitle the buyer to withhold payment for the item lot for which the claim is made. The Supplier shall not under any circumstances be held liable for any indirect or consequential losses arising from a delivery (including special or random losses, compensation for lost profits or lost revenue, business interruptions and losses due to further usage of the item).

14. FORCE MAJEUREThe seller shall not be held liable for any missing, defective or delayed delivery completely or in part caused by circumstances beyond the control of the Supplier. The Supplier is obligated to inform the buyer of such conditions without undue delay.

15. DISPUTESThis agreement, and any dispute associated with it, are subject to Norwegian law. Disputes shall be attempted solved through negotiations between the parties. If negotiations prove unsuccessful, the dispute shall be settle by the courts, and primarily in the Supplier’s court of domicile.

Subject to printing errors and changes in the assortment.

Price request / ordersTlf: 69 19 08 [email protected]@stangeskovene.no

Dealer

The Group's Production Facilities

Planing and cutting divisionBjørnstad Bruk Industri AS1792 Tistedaltlf 69 19 08 00

Moulding planing millK. Kværner Industri AS 2040 Kløftatlf 63 93 48 50

Casings, precut plantHemnes Tre AS1970 Hemnestlf 63 85 42 42

Sawmills and planing millsEidskog Stangeskovene AS2230 Skotterudtlf 62 83 22 00

www.stangeskovene.no

Subject to printing errors and changes in the assortment.

CONTACTS

Leif Henrik MoenProduction planning / salesBjørnstad Bruk Industri AS69 19 08 06

Terje RiddersethOrder receiver / timber surface treatmentBjørnstad Bruk Industri AS 69 19 08 15

Torfinn Bønøgård Sales and Logistics ManagerBjørnstad Bruk Industri AS 69 19 08 05 / 911 93 489

Cov

er p

hoto

: Jot

un A

SD

esig

n:

Documents

CLADDING, DECKING AND CONSTRUCTION MATERIALS · Exterior cladding The function of cladding The primary function of cladding is to protect the insulation from rain and mechanical damages