Upload
marc-alfred
View
214
Download
0
Embed Size (px)
Citation preview
7/27/2019 cl 1 q part 1
1/10
7/27/2019 cl 1 q part 1
2/10
www.meodeckofficer.com
ForAnswers.Contact
company history and psc detainment record. As chief engineer visiting a pot
under Paris MOU how would you prepare your ship for the visit.
Question
Why is dry-docking referred to as a major event in the maintenance of a
ship?As a Chief Engineer explain different steps that need consideration while
planning a dry-docking project of a ship due for its first special survey.
Question
How will you prepare your ship for a renewal survey of IAPPC InternationalAir Pollution Prevention Certificate!
Explain with specific emphasis on the records and documents to be maintained,
Exnumerate general requirements for shipboard incinerators, as mentioned in
Annex VI of MARPOL 73/78
Question
What are the significant SOLAS amendments coming into force in 2012?
With reference to SOLAS 2010 amendment, discuss "International Goal Based
Ship Construction standards?
Question
Any capital acquisition activity, like a ship acquisition, may be regarded as a
four step process. Identify the four Steps and briefly explain the activities
found in each of these steps.
Also, there are six methods of ship acquisition. Name them and briefly describe
them.
7/27/2019 cl 1 q part 1
3/10
www.meodeckofficer.com
ForAnswers.Contact
Question
With respect to registration of ships, explain the following:
a) Basic steps of registration
b) Effects of registration
c) Flags of convenience
d) Sale of mortgaged ship
Question
Discuss the peculiar working environments in which ships operate and how
they influence decisions on ships maintenance policies.
Question
Explain transient flooding phenomenon. Underline the risk involved with
transient flooding. Considering that transient flooding condition may lead to
capsizing of a vessel, explain the phases of ship's movement from upright to
overturn position due to transient flooding?
Question
Describe the responsibilities of a Chief Engineer under the relevant
requirements of the International Convention on Load Lines. In case of a
debate arising out of tonnage calculation for a ship in transit through a canal,
describe the modalities a Chief Engineer can adopt.
Question
Enumerate the causes of vibration in main propulsion diesel machinery and
shafting
7/27/2019 cl 1 q part 1
4/10
www.meodeckofficer.com
ForAnswers.Contact
Describe the inherent design aspect which reduces vibration from the engine
and propeller shafting and the possible measure taken by the operator to
reduce harmful vibration
Question
Enlist the factors of capsizing of a vessel. Give your observation with
reasoning that a smaller vessel is more prone to capsize than a bigger one.
State the actions that can be undertaken for improving resistance of a vessel
against capsizing?
Question
Has ISM code been successful in bringing changes with respect to safety
and environment protection?
With your past experience on serving on ships having safety management
system elaborate on the same.
Question
State from the different circumstances of running of propulsion engine and the
engine behavior, how best a plan for economic use of fuel can be developed
onboard from (i) Indicator diagrams (ii) Draw cards (iii) Light spring diagram
Question
With respect to human factor in ship design, comment on:
Noise and hearing.
Human cognitive attributes.
Human sensory limitations.
Effect of ship acceleration.
7/27/2019 cl 1 q part 1
5/10
www.meodeckofficer.com
ForAnswers.Contact
Question
With reference to maintenance of plant efficiency, discuss energy audit of main
engine, boilers and auxiliary engines. How such audit help in economizing fuel
oil consumption
Question
As a Chief Engineer on a fully loaded ship you are stranded in an island near,
the UK coast having no survey facility where the forepeak of the vessel is
severely damaged. Explain your actions with reasons and the procedures to be
adopted for making a safe return voyage to India.
Question
Discuss the influence the following properties / contents have on fuel
characteristics and its economic use: (i) viscosity (ii) density (iii) ignition
quality (iv) VI (v) compatibility (vi) carbon residue (vii) control of combustion
period
Question
Illustrate mean piston speed, its significance on consumption of fuel oil.
Explain how mean piston speed is related to r.p.m. and ideal combustion.
Joining an old ship as Chief Engineer, formulate a methodology by which you
can ascertain optimum use of fuel oil against desired mean piston speed.
Question
7/27/2019 cl 1 q part 1
6/10
www.meodeckofficer.com
ForAnswers.Contact
Describe a procedure to establish a training programme appropriate for the
training need of engine room personal on board, where you have joined as chief
engineer.
Illustrate the measure you will under take in view of a section of engine room
personnel not adept in attaining the standard with in a specified time period.
Question
Briefly summarize the 'Johari model' and the importance of the
development of good 'Interpersonal Awareness'.
Question.
Give the history of requirements for load line regulations, leading towards
the International convention on Load Line 1966.
What were the dates of adoption and entry into force?
What special provisions are included in the said convention, in comparison
with the first International Convention on Load line, 1930?
Describe in brief, highlighting the area of coverage and related Annexes.
Question.
Your vessel, which had recently been dry docked, is showing a significant
increase in fuel oil consumption. Frame a report, in the format of an e-mail
message, addressed to the Engineer Superintendent. Discuss the related
inspections made, findings established and suggestions for repair, if any.
Question
State the effect of increasing beam and freeboard on stability with reference
to a stability curve for a particular vessel in-a particular condition of
loading.
7/27/2019 cl 1 q part 1
7/10
www.meodeckofficer.com
ForAnswers.Contact
How to reduce the maximum range of stability under conditions in these
cases?
Question
Sketch and describe LNG as fuel for ship propulsion and the safeties that are
to be provided. What are the challenges in ship power and the developments
that are currently taking place?
Question
Underlining Marine Insurance Cover, explain (i) Hull & Machinery cover,
(ii) P & I insurance, (in) Cargo Insurance, (IV) Pollution Liability Insurance.
Question
Briefly summaries the four 'selfs' in the Johari Window. What
Implications does each have for interpersonal conflict onboard?
Question
What are the factors governing ship squat? Using relevant diagrams explain
your answers.
How to recognize whether / when Squat occurs?
How to prevent Squat?
Question
What are the various statutory Certificates carried on board oil tanker, and
their validity?Mention the Conventions, under which they are issued, giving the reference
of their Conventions.
Explain Harmonization of Statutory Certificates under the SOLAS 74/88
Convention.
7/27/2019 cl 1 q part 1
8/10
www.meodeckofficer.com
ForAnswers.Contact
If a period of a statutory Certificate has just expired and a port is having
inadequate survey facility, state the actions you will take, as per the
provision stated in the Protocol of 1998 relating to the International
Convention for the Safety of Life at Sea, 1974.
Question
What are the principal reasons responsible for compounding of machinery
vibration in connection with operation of a long stroke diesel engines and
associated machinery arrangements? What are the key factors for excitations
generated by the engines?
Question
The vessel of which you are Chief Engineer suffers grounding. Write a
report to be forwarded to the Superintendent of the company about the
surveys and inspections subsequently carried out when the vessel was dry-
docked in a foreign port.
Question
You as a Chief Engineer are asked by your company to carry out internal
audit of the deck-department under the ISM Code,
How would you carry out the audit & which areas would you lay emphasis
on during the audit?
Question
You are the Chief Engineer of a ship with four engineers and six enginecrew members. How would you set up a fire-fighting team & verify its
effectiveness
Question
7/27/2019 cl 1 q part 1
9/10
www.meodeckofficer.com
ForAnswers.Contact
You are the chief engineer of a vessel that has suffered a minor fire in the
engine room that burned off the wiring to essential pumps. Temporary
repairs were made to get the vessel underway. Write a letter to the company
head office describing the incident as to how the fire took place and what
corrective and preventive steps have you taken. What arrangements do you
suggest to affect a permanent repair at the next port of call?
Question
With respect to Merchant Shipping Act, 1958, as amended
Explain briefly the sections, relevant to the prevention and provisions for
containment of accidental pollution of the sea by oil;
Explain briefly the power vested with the State to give notice and to take
measures for preventing or containing the oil pollution.
Question
Highlight the role of Classification societies in providing set of standards for
sound merchant ship construction. Also state the importance of International
Association of Classification Societies and how they contribute in
improving standards of hull and machineries.
Question
UNCLOS and SOLAS 74 as amended states that it is mandatory for a flag
state to conduct investigation into a marine casualty.Explain with details with reference to M.S. Act, the authority and
responsibility vested with the administration.
Question
7/27/2019 cl 1 q part 1
10/10
www.meodeckofficer.com
ForAnswers.Contact
Differentiate the salient considerations taken during Survey of a ship under
1) Bare-boat charter, 2) Voyage charter & 3) Time charter.
As the Chief Engineer on board, explain with reasons, which of the three
Surveys is most demanding and exhaustive and why?
Question
What are the basic criteria in cargo carriage under bills of lading and related
documents?
Explain the procedure towards issue of bill of lading.
What are the obligations of the carrier and shipper under bill of lading?
What happens in case of a part of cargo getting lost or damaged?
Question
with reference to ship repair/ ship building, and engineering economics
explain the terms (i) Risk analysis, Brake even analysis, Sensitivity analysis,
Multi stage sequential analysis, Multi attribute decision making.
Question
Differentiate between static and dynamic stability? Can a ship, high on GM,
be low on stability? Justify your answer with reasoning. Enlist the governing
factors you will inspect, while taking over a new ship in shipyard as Chief
Engineer for having optimum stability in both categories. Substantiate your
answer with reasons.
This is only a sample for all question and answers pl contact me on this email id
www.meodeckofficer.com
Thanks