Embed Size (px)
Citation preview
1
Civil Engineering
2010
Table of Contents
ARIS ..........................................................................................................................1
Beer: Vector Mechanics for Engineers: Statics & Dynamics, 9/e .............................2
Costanzo: Engineering Mechanics: Statics & Dynamics, 1/e ...................................3
Beer: Mechanics of Materials, 5/e ............................................................................4
Leet: Fundamentals of Structural Analysis, 4/e ........................................................5
Nilson: Design of Concrete Structures, 14/e ............................................................6
Irvine: Surveying for Construction, 5/e .....................................................................7
Knutson: Construction Management Fundamentals, 2/e .........................................7
Cengel: Fluid Mechanics, 2/e ...................................................................................8
Finnemore: Fluid Mechanics with Engineering Applications, 10/e ...........................8
Davis: Introduction to Environmental Engineering, 4/e .............................................9
Davis: Principles of Environmental Engineering and Science, 2/e ...........................9
Davis: Water and Wastewater Engineering, 1/e .......................................................9
Blank: Basics of Engineering Economy, 1/e ...........................................................10
Blank: Engineering Economy, 6/e ...........................................................................10
Chapra: Applied Numerical Methods with MATLAB for Engineers and Scientists, 2/e .......................................................................11
Chapra: Numerical Methods for Engineers, 6/e .....................................................11
Eide: Engineering Fundamentals and Problem Solving, 5/e ..................................12
Musto: Engineering Computations, 1/e ..................................................................12
Martin: Introduction to Engineering Ethics, 2/e .......................................................12
Banks: Introduction to Transportation Engineering, 2/e .........................................12
Peurifoy: Construction Planning, Equipment and Methods, 8/e .............................12
Metcalf: Wastewater Engineering, 4/e ....................................................................12
Bockrath: Contracts and the Legal Environment for Engineers and Architects, 7/e .......................................................................12
Sturm: Open Channel Hydraulics, 2/e ....................................................................12
McGraw-Hill’s BEST-Basic Engineering Series and Tools .....................................12
Conn .............................................................................................................13
www.successinhighered.comWe are pleased to announce the launch of the McGraw-Hill Higher Education Success sites.
These sites will provide you with a consistent, one-stop shop, for finding new Science,
Engineering, and Math titles, accompanying digital offerings, related marketing webinars/
events, and seasonal promotions.
To checkout all subject-specific success sites, go to www.successinhighered.com and find
out how you and your students can prepare for success in the course!
NEW
NEW
NEW
NEW
NEW
NEW
NEW
1
Assessment, Review, and Instruction System, also known as ARIS, is an electronic homework and course management system designed for greater flexibility, power, and ease of use than any other system. Whether you are looking for a preplanned course or one you can customize to fit your course needs, ARIS is your solution.
You may be asking yourself, “Why should I use an electronic homework system? Why ARIS? Simply stated, ARIS provides instructors with a complete course management freedom to:
• Go beyond the limits of print: Students have 24-hour access to practice sets and smart tutorial feedback to master curricular goals. Some courses’ practice sets can be algorithmically
generated providing virtually unlimited practice. Students also have access to animations, videos and simulations.
• Spend more time teaching: Tired of spending most of your time creating and grading homework? With ARIS, building quizzes, homework assignments, tests, etc. is only a few clicks away. If you don’t want to create your own content you can also choose pre-built assignments or import content from other sources, including WebCT and Blackboard. And of course, assignments are automatically graded. You may never need to grade homework again!
• Know exactly where your students stand: ARIS’ gradebook functionality is extremely versatile and allows you to manipulate data with different views and sorts to track student
progress. View student scores in real-time, identify areas where they are struggling, and build your assignments and lecture accordingly.
• Control the communication and content of your course: Enhance your communication with students via ARIS through posting announcements, attaching documents, hosting chat sessions, and email. Easily control the direction of your course and make sure other instructors, adjuncts, part timers, and TAs are “on the same page” by creating a master syllabus.
www.mharis.com
2
Table of contents1: Introduction 2: Statics of Particles 3: Rigid Bodies: Equivalent Systems of Forces 4: Equilibrium of Rigid Bodies 5: Distributed Forces: Centroids and Centers of Gravity 6: Analysis of Structures 7: Forces in Beams and Cables 8: Friction 9: Distributed Forces: Moments of Inertia 10: Method of Virtual Work 11: Kinematics of Particles 12: Kinetics of Particles: Newton’s Second Law 13: Kinetics of Particles: Energy and Momentum Methods 14: Systems of Particles
15: Kinematics of Rigid Bodies 16: Plane Motion of Rigid Bodies: Forces and Accelerations 17: Plane Motion of Rigid Bodies: Energy and Momentum
Methods18: Kinetics of Rigid Bodies in Three Dimensions 19: Mechanical Vibrations
Supplements978-0-07-730366-2 (Instructor’s Solutions Manual: Dynamics Vol. 1 and 2)978-0-07-730367-9 (Instructor’s Solutions Manual: Statics Vol. 1 and 2)
The Beer/Johnston textbooks introduced significantpedagogical innovations into engineering mechanics teaching. The consistent, accurate problem-solving
methodology gives your students the best opportunity
to learn statics and dynamics. At the same time, the careful presentation of content, unmatched levels of accuracy, and attention to detail have made these texts the standard for excellence.
Features
• A Careful, Step-By-Step Presentation is followed in each lesson of each chapter, and every chapter starts with a real-life example and an outline previewing the chapter objectives and lessons. Each lesson is accompanied by sample problems and Solving Problems On Your Own boxes that prepare students for the problem sets. Each chapter finishes with a brief Review Problem set and an assortment of computer and design problems.
• Well-Respected Sample Problems are a signature Beer and Johnston text feature that allow students to see important key problem types and with the solution laid out on a single page, organized to provide a potent model for student problem solving.
• Instructor’s Solutions Manual offers a clear type-set presentation and organization of problem solutions. Instructors are provided with assignment grids, designed so that instructors can assign different homework problems each semester for up to six semesters.
• Computer and Design Problems are offered at the end of each chapter using programs like MATLAB, Mathcad, and Maple, etc.
• McGraw-Hill’s web-based Hands-on Mechanics teaching demonstration library provides instructors with instructions for building hands-on physical models used to demonstrate important statics and dynamics concepts in class.
Vector Mechanics for Engineers: Statics and Dynamics, 9/e
Ferdinand P. Beer, (deceased)E. Russell Johnston, Jr., University of Connecticut David Mazurek, U.S. Coast Guard AcademyPhillip J. Cornwell, Rose-Hulman Institute of Technology Elliot R. Eisenberg, Pennsylvania State University
www.mhhe.com/beerjohnston2010 • 978-0-07-727555-6 • 1,376 pages
NEW
3
Table of contentsStatics
1: Introduction 2: Vectors: Force and Position 3: Equilibrium of Particles 4: Moment of a Force and Equivalent Force Systems 5: Equilibrium of Bodies 6: Structural Analysis and Machines 7: Centroids and Distributed Force Systems 8: Internal Forces 9: Friction 10: Moments of Inertia
Dynamics
1: Setting the Stage for the Study of Dynamics 2: Particle Kinematics 3: Force and Acceleration Methods for Particles 4: Energy Methods for Particles 5: Momentum Methods for Particles 6: Planar Rigid Body Kinematics 7: Newton-Euler Equations for Planar Rigid Body Motion 8: Energy and Momentum Methods for Rigid Bodies 9: Mechanical Vibrations 10: Three-Dimensional Dynamics of Rigid Bodies
Engineering Mechanics: Statics & Dynamics presents the fundamental concepts clearly, in a modern context
using applications and pedagogical devices that
connect with today’s students. The first new mainstream text in engineering mechanics in nearly twenty years, Plesha, Gray, and Costanzo’s Engineering Mechanics: Statics and Dynamics will help your students learn this important material efficiently and effectively.
Features
• Problem Solving Methodology used in all example
problems: A consistent problem-solving approach is used throughout. Each example problem is solved using a “template” that helps students effectively set up the problem and solve it correctly.
• Introduces Appropriate Use of Computational Tools:
Fundamental concepts are taught thoroughly, and the use of computational tools is taught when appropriate.
• Appropriate Design Coverage: The authors have brought engineering design considerations into selected problems where applicable. This will sensitize students to the fact that engineering problems do not have a single answer and many different routes lead to a correct solution.
• Real World Examples, Problems, Applications,
Photographs: All the photographs, applications, examples are from the real world, so that students will be able to identify circumstances that they encounter in there daily lives.
• Online Homework features selected problems from the text and algorithmically-generated problems that give the instructor a wide array of homework assignment options.
Engineering Mechanics: Statics and Dynamics, 1/e
Francesco Costanzo, Penn State University Michael E. Plesha, University of Wisconsin - Madison Gary L. Gray, Penn State University
www.mhhe.com/pgc 2010 • 978-0-07-730200-9 • 1,376 pages
NEW
4
Table of contents1: Introduction-Concept of Stress 2: Stress and Strain-Axial Loading 3: Torsion 4: Pure Bending 5: Analysis and Design of Beams for Bending 6: Shearing Stresses in Beams and Thin-Walled Members 7: Transformation of Stress And Strain
8: Principal Stresses Under Given Loading Conditions 9: Deflection of Beams 10: Columns 11: Energy Methods
Supplements978-0-07-727039-1(Instructor’s Solutions Manual Vol. 1 & 2)
For the past fifty years, Beer and Johnston have been the uncontested leaders in the teaching of undergraduate engineering mechanics. Their careful presentation of
content, unmatched levels of accuracy, and attention to
detail have made their texts the standard for excellence. The main objective of a mechanics course should be to develop in the engineering student, the ability to analyze a given
problem in a simple and logical manner, and to apply
to its solution, a few fundamental and well-understood principles. This text is designed for the first course in mechanics of materials - or strength of materials - offered to engineering students in the sophomore or junior year.
Features
• Over 1,600 high-quality, accurate problems.
• Sample problems and examples: New and revised problems created with the same accuracy and careful development for which Beer/Johnston is known.
• Review of statics and the use of free-body diagrams.
• Chapter Review and Summary: Each chapter ends with a review and summary of the material covered in the chapter. Notes in the margin have been included to help the students organize their review work, and cross references provided to help them find the portions of material requiring their special attention.
• Review Problems: A set of review problems is included at the end of each chapter. These problems provide students further opportunity to apply the most important concepts introduced in the chapter.
• Fundamentals of Engineering Examination: Engineerswho seek to be licensed as Professional Engineers must take two exams. The first exam, the Fundamentals of Engineering Examination, includes subject material from Mechanics of Materials. Appendix E lists the topics in Mechanics of Materials that are covered in this exam along with problems that can be solved to review this material.
• ARIS: McGraw-Hill’s Assessment, Review, and Instruction System is a complete, online tutorial, electronic homework, and course management system, designed for greater ease of use than any other system available. ARIS provides all instructor resources online, as well provides the ability to create or edit questions from the question bank, import your own content, and automatically grade and report easy-to-assign homework, quizzing, and testing.
• For students, ARIS contains self-study tools such as animations, interactive quizzes, and more. This program enables students to complete their homework online, as assigned by their instructors.
• Hands On Mechanics lets the professor create an easy way to present physical demonstrations in the course.
• COSMOS is also available online and has all the exercises and solutions available in an online tool that will help professors easily build assignments.
Mechanics of Materials, 5/e
Ferdinand P. Beer, (deceased)E. Russell Johnston, Jr., University of Connecticut John T. DeWolf, University of Connecticut David Mazurek, U.S. Coast Guard Academy
www.mhhe.com/beerjohnston2009 • 978-0-07-128422-6 • 816 pages
5
Table of contents1: Introduction 2: Design Loads 3: Statics of Structures-Reactions 4: Trusses 5: Beams and Frames 6: Cables 7: Arches 8: Live Load Forces: Influence Lines for Determinate Structures 9: Deflections of Beams and Frames 10: Work-Energy Methods for Computing Deflections11: Analysis of Indeterminate Structures by the Flexibility
Method
12: Analysis of Indeterminate Beams and Frames by the Slope-Deflection Method
13: Moment Distribution 14: Indeterminate Structures: Influence Lines 15: Approximate Analysis of Indeterminate Structures 16: Introduction to the General Stiffness Method 17: Matrix Analysis of Trusses by the Direct Stiffness Method 18: Matrix Analysis of Beams and Frames by the Direct
Stiffness Method
Fundamentals of Structural Analysis, 4/e introduces engineering and architectural students to the basic
techniques for analyzing the most common structural
elements, including beams, trusses, frames, cables, and arches. The text covers the classical methods of analysis for determinate and indeterminate structures, and provides an introduction to the matrix formulation on which computer analysis is based.
Features
• Design and layout has been improved to better illustrate example problems.
• The Solutions Manual has been revised and checked for accuracy.
• The text contains a highly detailed, realistic art program with fully drawn, practical illustrations.
• Website contains solutions manual, image library, computer problem solutions, and RISA software.
• Chapter Two, Design Loads, is devoted to a comprehensive discussion of loads that include dead and live loads, tributary areas and earthquake and wind forces. Wind specifications conform to the latest edition of the ASCE Standard.
• “Computer Problems” that require a computer solution rather than a hand analysis are found in various chapters.
• Different types of Structural and Building Codes are described.
Fundamentals of Structural Analysis, 4/e
Kenneth M. Leet, Northeastern University Chia-Ming Uang, University of California-San DiegoAnne M. Gilbert, Speigel Zamecnik & Shah, Inc.
www.mhhe.com/leet2010 • 978-0-07-128938-2 • 864 pages
NEW
3ecover
6
Table of contents1: Introduction 2: Materials 3: Flexural Analysis and Design of Beams 4: Shear and Diagonal Tension in Beams 5: Bond, Anchorage, and Development Length 6: Serviceability 7: Analysis and Design for Torsion 8: Short Columns 9: Slender Columns 10: Strut-and-Tie Models
11: Design of Reinforcement at Joints 12: Analysis of Indeterminate Beams and Frames 13: Analysis and Design of Slabs 14: Yield Line Analysis for Slabs 15: Strip Method for Slabs 16: Footings and Foundations 17: Retaining Walls 18: Concrete Building Systems 19: Prestressed Concrete 20: Seismic Design
The 14th edition of the classic text, Design of Concrete Structures, is completely revised using the newly
released 2008 ACI (American Concrete Institute) Code.This new edition has the same dual objectives as the previous editions; first to establish a firm understanding of the behavior of structural concrete, then to develop proficiency in the methods used in current design practice.
Features
• Covers the behavior and design aspects of concrete andprovides updated examples and homework problems.
• New material on slender columns, seismic design, and anchorage using headed deformed bars, and reinforcing slabs for shear using headed studs has been added.
• Presents the basic mechanics of structural concrete andmethods for the design of individual members for bending, shear, torsion, and axial force.
• Provides detail in the various types of structural systems
applications, including an extensive presentation of slabs, footings, foundations, and retaining walls.
• Expanded presentation and enhanced example problems in Chapter 3 on Flexural Analysis and Design.
• Expanded coverage on bond and development of
reinforcement using headed deformed bars in Chapter 5.
• Slender column design requirements revised and updated in Chapter 9.
• Interior of the text is designed for new, open look.
• Applications impart an “Engineering” flavor which reflects the authors’ practical experience.
Design of Concrete Structures, 14/e
Arthur H. Nilson, Cornell University David Darwin, University of Kansas Charles W. Dolan, University of Wyoming
www.mhhe.com/concrete2010 • 978-0-07-131139-7 • 864 pages
NEW
7
Construction Management Fundamentals, 2/e, intended as an introduction to both technical and business sides of construction, covers fundamentals of construction in
a logical, simple, and concise format. Numerous examples reinforce construction and management concepts through applications, photographs, and illustrations derived from actual projects. Based upon professional practice, standard formats for analyzing common problems are presented and explained preparing students for fast-paced bid preparation.
Features• Stressing the importance of safety, the authors have completely rewritten the safety chapter and added more information of
OSHA required safe practices and reporting requirements.
• Clear Explanations of Terminology for students who are not familiar with construction and its vocabulary, all terms are explained, nit just defined, to allow application of the information
• Discussion of latest trends and practices: The final chapter discusses the latest developments in “green” construction and LEED certification, as well as new trends in public/private partnerships.
Construction Management Fundamentals, 2/e
Kraig Knutson, Arizona State University Clifford J. Schexnayder, Arizona State University Christine M. Fiori, Arizona State University Richard Mayo, (deceased)
www.mhhe.com/knutson 2009 • 978-0-07-340104-1 • 720 pages
Table of contents1: Historical PerspectivePart 1: Construction Management 2: Overview of the Construction Industry 3: Construction Management Functions 4: Scheduling Techniques for Construction Projects 5: Construction Cost Estimates 6: Estimating Heavy/Civil Projects 7: Estimating Building Projects 8: Construction Contracts Administration 9: Construction Accounting
Part 2: Construction Practice: 10: Machine Power 11: Equipment Selection and Utilization 12: Equipment Cost 13: Building Materials 14: Building Construction Methods 15: Quality and Productivity 16: Safety 17: Trends
Surveying for Construction 5/e is an essential textbook for students of engineering new to surveying, and will also appeal to students of building and environmental studies and archaeology. Offering a strong grounding in land and construction surveying, the authors clearly and comprehensively guide the reader through the principles, methods and equipment used in modern-day surveying. Taking into account recent advances in the field, the material has been fully updated and revised throughout including new and up-to-date coverage of levelling, total stations, detail surveys, and EDM.
Surveying for Construction, 5/e
William Irvine
Finlay Maclennan, Glasgow Metropolitan College
www.mcgraw-hill.co.uk/textbooks/irvine2006 • 978-0-07-711114-4 • 464 pages
Table of contents1: Surveying Fundamentals 2: Understanding Maps and Plans 3: Linear Surveying 4: Levelling 5: Contouring 6: Vertical sections 7: Theodolites and Total Surveys 8: Traverse surveys
9: Global Positioning System (GPS) 10: Detail Survey 11: Curve ranging 12: Setting out construction works 13: Mensuration--areas 14: Mensuration--volumes 15: Surveys of existing buildings
8
Fluid Mechanics, 2/e communicates directly with tomorrow’s engineers in a simple yet precise manner. The text covers the basic principles and equations of fluid mechanics
in the context of numerous and diverse real-world engineering examples. It helps students develop an intuitive understanding of fluid mechanics by emphasizing the physical underpinning of processes and by utilizing numerous informative figures, photographs, and other visual aids to reinforce the basic concepts.
Features• Features more illustrations and photographs than other fluid mechanics text.
• Topic flexibility to facilitate different approaches to the course.
• A wealth of material on the history of fluid mechanics is integrated throughout.
• Includes examples generated by computational fluid dynamics (CFD) throughout the text, and an introductory chapter on CFD.
• Application Spotlights--real-world applications of fluid mechanics are featured in many chapters.
• Every chapter contains worked-out example problems. The authors use a consistent approach in problem solving while maintaining their informal conversational style.
• Our text contains over 1600 homework problems.
Fluid Mechanics: Fundamentals and Applications, 2/e
Yunus A. Cengel, University of Nevada-Keno John M. Cimbala, Pennsylvania State University
www.mhhe.com/cengel2009 • 978-0-07-128421-9 • 992 pages
Fluid Mechanics with Engineering Applications, 10/e is well known and well respected in the civil engineering market and has a following among civil engineers. This book is for civil engineers that teach fluid mechanics both within their discipline and as a
service course to mechanical engineering students. The 10th edition is extraordinarily accurate, its coverage of open channel flow and transport is superior, and there is a broad coverage of all topics.
Fluid Mechanics with Engineering Applications, 10/e
E. John Finnemore, Santa Clara University Joseph B. Franzini, Stanford University
www.mhhe.com/engcs/civil/finnemore 2002 • 978-0-07-127011-3 • 816 pages
Table of contents1: Introduction and Basic Concepts 2: Properties of Fluids3: Pressure and Fluid Statics4: Fluid Kinematics5: Mass, Bernoulli and Energy Equations6: Momentum Analysis of Flow Systems7: Dimensional Analysis and Modeling8: Internal Flow
9: Differential Analysis of Fluid Flow10: Approximate Solutions of the Navier-stokes Equation11: External Flow: Drag and Lift12: Compressible Flow13: Open-channel Flow14: Turbomachinery15: Introduction to Computational Fluid Dynamics
Table of contents1: Introduction 2: Properties of Fluids 3: Fluid Statics 4: Basics of Fluid Flow 5: Energy in Steady FLow 6: Momentum and Forces in Fluid Flow 7: Similitude and Dimensional Analysis 8: Steady Incompressible Flow in Pressure Conduits
9: Forces on Immersed Bodies 10: Steady Flow in Open Channels 11: Fluid Measurement 12: Unsteady-Flow Problems 13: Steady Flow of Compressible Fluids 14: Ideal Flow Mathematics 15: Hydraulic Machinery--Pumps 16: Hydraulic Machinery--Turbines
9
Introduction to Environmental Engineering, 4/e contains the essential science and
engineering principles needed for introductory courses and used as the basis
for more advanced courses in environmental engineering. Updated with latest EPA regulations, Davis and Cornwell apply the concepts of sustainability and materials and energy balance as a means of understanding and solving environmental engineering issues. This text is both a comprehensible and comprehensive tool for any
environmental engineering course.
Introduction to Environmental Engineering, 4/e
Mackenzie L. Davis, Michigan State University David A. Cornwell, Environmental Engineering and Technology, Inc.
www.mhhe.com/davis 2008 • 978-0-07-125922-4 • 1,024 pages
Principles of Environmental Engineering and Science, 2/e
Water and Wastewater Engineering integrates theory and design. Fundamental
environmental engineering principles are used as the foundation for rigorous
design of conventional and advanced water and wastewater treatment processes.
Reverse osmosis, membrane filtration, UV disinfection, biological nutrient removal and membrane bioreactors represent a small sample of the processes included. The text includes appropriate regulatory constraints and highlights safety issues. Hints from the field bring to the student real-life experience in solving technical issues.
Water and Wastewater Engineering: Design Principles and Practice, 1/e
Mackenzie L. Davis, Michigan State University
www.mhhe.com/davis1e2010 • 978-0-07-128924-5 • 1,024 pages
Principles of Environmental Engineering and Science, 2/e is intended for a course in introductory environmental engineering. This text provides a background in
fundamental science and engineering principles of environmental engineering for
students who may or may not become environmental engineers. Principles placesmore emphasis on scientific principles, ethics, and safety, and focuses less on engineering design. The text exposes students to a broad range of environmental topics including risk management, water quality and treatment, air pollution, hazardous waste, solid waste, and ionizing radiation as well as discussion of relevant regulations and practices.
Mackenzie L. Davis, Michigan State University Susan J. Masten, McMaster University
www.mhhe.com/davismasten2009 • 978-0-07-128780-7 • 800 pages
NEW
10
Basics of Engineering Economy covers the basic techniques and applications of engineering economy for all disciplines in the engineering profession. The writing style emphasizes brief, crisp coverage of the principle or technique discussed in order
to reduce the time taken to present and grasp the essentials. The objective of the text is to explain and demonstrate the principles and techniques of engineering economic analysis as applied in different fields of engineering.
Features• Text integrates spreadsheets in the book.
• End-of-chapter problems.
• Information on cost estimation, depreciation and taxes has been included.
• Extended Exercises can be found in every chapter of the text.
Basics of Engineering Economy, 1/e
Leland T. Blank, Texas A&M University and American University of Sharjah, UAEAnthony J. Tarquin, University of Texas-El Paso
www.mhhe.com/blank2008 • 978-0-07-128762-3 • 432 pages
Engineering Economy, 6/e, provides undergraduate students and practicing professionals with a solid preparation in the financial understanding of engineering problems
and projects, as well as the techniques needed for evaluating and making sound
economic decisions. Information on cost estimation, depreciation, and taxes has been updated to conform to new tax laws and a majority of the end-of-chapter problems are revised or new to this edition. Distinguishing pedagogical characteristics of this market-leading text include its easy-to-read writing style, chapter objectives, worked examples, integrated spreadsheets, case studies, Fundamentals of Engineering (FE) exam questions, and numerous end-of-chapter problems.
Engineering Economy, 6/e
Leland T. Blank, Texas A&M University and American University of Sharjah, UAEAnthony Tarquin, University of Texas-El Paso
www.mhhe.com/blank6e 2005 • 978-0-07-127450-0 • 800 pages
Table of contents1: Foundations of Engineering Economy 2: Factors: How Time and Interest Effect Money 3: Nominal and Effective Interest Rates 4: Present worth Analysis 5: Annual worth Analysis 6: Rate of Return Analysis
7: Benefit/Cost Analysis and Public Sector Projects 8: Breakeven, Sensitivity and Payback Analysis 9: Replacement and Retention Decisions 10: Effects of Inflation 11: Estimating Costs 12: Depreciation Methods 13: After-Tax Economic Analysis
Table of contentsLevel 1: This is How It All Starts
1: Foundations of Engineering Economy 2: Factors: How Time and Interest Affect Money 3: Combining Factors 4: Nominal and Effective Interest RatesLevel 2: Tools for Evaluating Alternatives
5: Present worth Analysis 6: Annual worth Analysis 7: Rate of Return Analysis: Single Alternative 8: Rate of Return Analysis: Multiple Alternatives 9: Benefit/Cost Analysis and Public Sector Economics 10: Making Choices: The Method, MARR, and Multiple AttributesLevel 3: Making Decisions on Real-World Projects
11: Replacement and Retention Decisions 12: Selection from Independent Projects Under Budget Limitation 13: Breakeven AnalysisLevel 4: Rounding Out the Study
14: Effects of Inflation 15: Cost Estimation and Indirect Cost Allocation 16: Depreciation Methods 17: After-Tax Economic Analysis 18: Formalized Sensitivity Analysis and Expected Value Decisions 19: More on Variation and Decision Making Under Risk
Supplement978-0-07-298450-7 (COSMOS CD)
11
Instructors love Numerical Methods for Engineers because it makes teaching easy! Students love it because it is written for them--with clear explanations and examples throughout.
The text features a broad array of applications that span all engineering disciplines.The sixth edition retains the successful instructional techniques of earlier editions. Chapra and Canale’s unique approach opens each part of the text with sections called Motivation, Mathematical Background, and Orientation. This prepares the student for upcoming prob-lems in a motivating and engaging manner. Each part closes with an Epilogue containing Trade-Offs, Important Relationships and Formulas, and Advanced Methods and Additional References. Much more than a summary, the Epilogue deepens understanding of what has been learned and provides a peek into more advanced methods.
Numerical Methods for Engineers, 6/e
Steven C. Chapra, Tufts University Raymond P. Canale, University of Michigan
www.mhhe.com/chapra 2009 • 978-0-07-126759-5 • 960 pages
Table of contents1: Mathematical Modeling and Engineering Problem Solving 2: Programming and Software 3: Approximations and Round-Off Errors 4: Truncation Errors and the Taylor Series5: Bracketing Methods 6: Open Methods 7: Roots of Polynomials 8: Case Studies: Roots of Equations9: Gauss Elimination 10: LU Decomposition and Matrix Inversion 11: Special Matrices and Gauss-Seidel 12: Case Studies: Linear Algebraic Equations13: One-Dimensional Unconstrained Optimization 14: Multidimensional Unconstrained Optimization 15: Constrained Optimization 16: Case Studies: Optimization
17: Least-Squares Regression 18: Interpolation 19: Fourier Approximation 20: Case Studies: Curve Fitting21: Newton-Cotes Integration Formulas 22: Integration of Equations 23: Numerical Differentiation 24: Case Studies: Numerical Integration and Differentiation25: Runge-Kutta Methods 26: Stiffness and Multistep Methods 27: Boundary-Value and Eigenvalue Problems 28: Case Studies: Ordinary Differential Equations29: Finite Difference: Elliptic Equations 30: Finite Difference: Parabolic Equations 31: Finite-Element Method 32: Case Studies: Partial Differential Equations
Chapra’s second edition is written for engineering and science students who need to learn numerical problem solving. This text focuses on problem-solving applications rather
than theory, using MATLAB throughout. Theory is introduced to inform key concepts which are framed in applications and demonstrated using MATLAB. The second edition features new chapters on Numerical Differentiation, Optimization, and Boundary-Value Problems (ODEs).
Applied Numerical Methods with MATLAB for Engineers and Scientists, 2/e
Steven C. Chapra, Tufts University
www.mhhe.com/chapra2008 • 978-0-07-125921-7 • 608 pages
Table of contents1: Mathematical Modeling Numerical Methods and Problem Solving 2: MATLAB Fundamentals 3: Programming with MATLAB 4: Roundoff and Trunication Errors5: Roots: Bracketing Methods 6: Roots: Open Methods 7: Optimization8: Linear Algebraic Equations and Matrices 9: Gauss Elimination 10: LU Factorization 11: Matrix Inverse and Condition
12: Iterative Methods13: Linear Regression 14: General Linear Least-Squares and Non-Linear Regression 15: Polynomial Interpolation 16: Splines and Piecewise Interpolation17: Numerical Integration Formulas 18: Numerical Integration of Functions 19: Numerical Differentiation20: Initial-Value Problems 21: Adaptive Methods and Stiff Systems 22: Boundary-Value Problems
12
Eide: Engineering Fundamentals and Problem Solving, 5/e www.mhhe.com/best 2008 • 978-0-07-110190-5 •
480 pages
Musto: Engineering Computations: An Introduction Using MATLAB and Excelwww.mhhe.com/musto 2009 • 978-0-07-126357-3 •
336 pages
Banks: Introduction to Transportation Engineering, 2/e www.mhhe.com/banks 2002 • 978-0-07-124034-5 •
512 pages
Peurifoy: Construction Planning, Equipment and Methods, 8/e www.mhhe.com/peurifoy8e 2010 • 978-0-07-128951-1 •
784 pages
Martin: Introduction to Engineering Ethics, 2/e www.mhhe.com/best 2009 • 978-0-07-248311-6 •
288 pages
Sturm: Open Channel Hydraulics, 2/ewww.mhhe.com/sturm 2009 • 978-0-07-126793-9 •
576 pages
Bockrath: Contracts and the Legal Environment for Engineers and Architects, 7/e www.mhhe.com/bockrath2010 • 978-0-07-339784-9 •
640 pages
NEW
McGraw-Hill’s BEST — Basic Engineering Series and Toolswww.mhhe.com/engcs/general/best
NEW
13
14
McGraw-Hill Education offers a variety of content solutions to help lecturers create a customized text closely matching their syllabus and students’ ability.
Create your ideal text by:Create your ideal text by:• Combining content from more than one McGraw-Hill textbook• Deleting the content you do not cover• Including special readings and cases• Adding your syllabus, lecture notes and university logo• Joining the text and study guide in one book
And, this time, add a subject-specific glossary translated in your local language!
Middle East & Africa
Aly Mahmoud(Egypt, Libya, Morocco & Tunisia)[email protected]: 0020 1 23161795Tel. /Fax: 0020 2 24534178
Mohamed Shawky(Egypt, Libya, Morocco & Tunisia)[email protected]: 0020 1 80603886Tel. /Fax: 0020 2 22705305
Haluk Baykara(Turkey, North Cyprus & Israel)[email protected]: 0090 532 3514194Tel.: 0090 312 2381369Fax: 0090 312 2381395
Sevcan Karababa(Turkey & North Cyprus)[email protected]: 0090 533 3503378Tel: 0090 312 4176458Fax: 0090 312 4176459
Faris Bukhari(Jordan, Lebanon, Syria & Palestine)[email protected]: 00962 777 44 7676
Hassan Zaza(U.A.E. & Gulf States)[email protected]: 00971 506534623Tel.: 00971 43913171Fax: 00971 43918005
Shirine Habash(U.A.E. & Gulf States)[email protected]: 00971 509034491Tel.: 00971 43913171Fax: 00971 43918005
Hussein Al-Qadi(Saudi Arabia & Yemen)[email protected]: 009665 0 4630149Tel. /Fax: 009661 4 742447
Tony MoggachIMA (Africa)[email protected].: 0044 20 72678054Fax: 0044 20 74240034/74858462
Joseph MakopeIMA (Africa)[email protected].: 00234 8089539358 / 0044 20 72678054Fax: 0044 20 74240034/74858462
Behruz Neirami(Iran)[email protected].: 0098 2188748554Fax: 0098 2188745894
Marketing Managers, MEATaline Prescott-DecieBusiness, Humanities & Social [email protected]: 00961 3 326143Tel. /Fax: 00961 4 401579
Wissam Al-Sha’arScience, Engineering & [email protected]: 00961 3 849458Tel. /Fax: 00961 5 410748
Greece, Cyprus & Malta
Yiannis PlessasSales [email protected]: 0030 6945339755Tel.: 0030210 6560990Fax: 0030210 6545525
Eastern Europe
Marek [email protected]: 0048 602 707037Tel. /Fax: 0048 22 6714819
Radek [email protected]: 00420 602 294014
Need help getting started?
Contact your representative or our Editorial Department:
Tanja Radivoevska
Tel.: 0030210 6560990
Fax: 0030210 6545525
™
www.mcgrawhillcreate.com
Craft your teaching resources to match the way you teach!
Find
Personalize
Search across and within 3 million pages of content. Full text search across all McGraw-Hill resources. Specialized search filters—by discipline, by copyright, etc.
Arrange Rearrange chapters, combine content from multiple sources, and even upload your own content.
Select your cover, add your course information, and choose either an eBook or a print book for your students.
*Receive a FREE PDF review copy in minutes!
Register TODAY and see how McGraw-Hill Create™ allows you to teach your students, your way!
