citrix - Bloc-notes

citrixQUESTION 1 Scenario: An administrator determined that an application pilot environment should be installed. Two servers have been allocated for this purpose. How

should the pilot environment be established and why? A. The servers should be placed in a distinct farm so that testing does NOT impact production. B. The servers

should be placed in a distinct zone so that testing does NOT impact production. C. The servers should be configured based on virtual servers so that scalabilitydata

can be derived for physical servers. D. The servers should be configured to access a distinct license server to prevent impacting license server communications.

Answer: A Section: (none) Explanation/Reference:

QUESTION 2 A company acquired another company but needs to keep the IT department's ndependent. What must the administrator create in order to keep theIT department

independent from hat of the acquired company? A. A new farm B. A new data store C. A new license server D. Additional Citrix XenApp servers Answer: A Section: (none)

Explanation/Reference:

QUESTION 3 What should an administrator install to secure communication between the Web Interface server and Secure Gateway server? A. Secure Gateway proxy in the DMZ

B. SSL server certificate on the Web Interface server C. Web Interface server ona Citrix XenApp server in the internal network D. Secure Gateway Service on a Citrix

XenApp server in the internal network Answer: B Section: (none) Explanation/Reference: 3.

QUESTION 4 Scenario: A Citrix XenApp farm consists of three servers each publishing installed applications only. All user access is through Web Interface. During early

testing of application streaming, the administrator would like to isolate all streaming activity to only one server.Which three steps could the administrator take to

achieve this? (Choose three.) A. Deploy a second XenApp Web site with resource type streaming and publish the profiled applications on one server. B. Deploy a second

XenApp Services site with resource type streaming and publish the profiled applications on one server. C. Update the resource type to dual mode streaming on the XenApp

Web site and publish the profiled applications on one server. D. Update the resource type to dual mode streaming on the Web Interface and update the properties of the

published applications to stream to client on one server. E. Update the resourcetype to dual mode streaming on the Web Interface and apply a User Workspace policy to

force streaming and use a filter to apply it on one server. Answer: ABC Section:(none) Explanation/Reference:

QUESTION 5 Scenario: An environment consists of two Citrix XenApp farms, each

Pge p

citrixconsisting of twelve Citrix XenApp servers. The user community consists of internal,

telecommuter, and three vendors that connect to the Citrix XenApp environment ona regular basis. All users are running Windows XP and Internet Explorer. The following

is a list of requirements: Minimal administrative configuration Seamless integration into the Start menu Application delivery for published applications available to

all users Which step should the administrator take to meet the requirements of the scenario? A. Install the Native client. B. Configure a XenApp Web site. C. Install

the Embedded Native client. D. Configure a XenApp Services site. Answer: D Section: (none) Explanation/Reference:

QUESTION 6 Scenario: 4. Users at a remote site use Citrix XenApp to connect to mission-critical applications. They are required to copy clipboard, TWAIN and hard drive

data between the client and the server. In order to ensure sessions have sufficient bandwidth over a congested WAN link, an administrator has decided to restrict the

clipboard, TWAIN and hard drive channels to consume no more than 40% of the overall session limit. Based on a network calculation, each user has 200Kbps of bandwidth

available to them.Which action can the administrator take to meet the requirements of the scenario? A. Configure Session Limits B. Enable content redirection C.

Configure ICA-TCP settings D. Enable SpeedScreen Progressive Display Answer: A Section: (none) Explanation/Reference:

QUESTION 7 SpeedScreen Browser Acceleration can be configured through __________and __________. (Choose the two correct options to complete the sentence.) A. policies

B. farm properties C. server properties D. ICA configurations Answer: BC Section: (none) Explanation/Reference:

QUESTION 8 After an administrator implemented several new policies, a user reports that he cannot see client drives or printers when connecting to the Citrix XenApp

farm.What can the administrator use to verify which policies are in conflict? A.Report Center B. Diagnostic Facility C. Policy Search Engine D. Terminal Services

Configuration Answer: C Section: (none) Explanation/Reference: 5.

QUESTION 9 Users at a Real Estate company experience poor picture quality when manipulating high-detail property pictures with published three-dimensional software.

Which SpeedScreen solution should be configured to optimize the user experience and how? A. Progressive Display in the same policy rule as Image Acceleration B.

Multimedia Acceleration in the same policy rule as Image Acceleration C. Flash Acceleration in the server properties page in the Access Management Console D. Browser

Acceleration in the server properties page in the Access Management Console

Pge p

citrixAnswer: A Section: (none) Explanation/Reference:

QUESTION 10 How can an administrator turn off a policy rule without having to edit every policy that contains that rule? A. Delete the policy. B. Change the policy to

deny. C. Lower the priority of the policy. D. Change the rule in the highest priority policy to disabled. Answer: D Section: (none) Explanation/Reference:

QUESTION 11 Scenario: An administrator of a Citrix XenApp farm needs to deliver Citrix XenApp plugins to the users. It is a small environment and the administrator

does NOT have a delivery tool. All desktops are part of the Active Directory domain.From the listed options, the administrator should deliver the plugins through

_______, resulting in the least amount of administrative effort. (Choose the correct option to complete the sentence.) A. a network share B. FTP to the desktop C.

application streaming D. Active Directory group policy Answer: D Section: (none)Explanation/Reference: 6.

QUESTION 12 Scenario: Users experience poor picture quality of animations playedin published web applications. They also notice that when they have several

applications open at the same time, certain applications tend to become affectedby activity from another application. Which SpeedScreen Flash Acceleration option

should the administrator select to resolve this issue? A. All connections B. Do not optimize C. JPEG compression D. Buffer compression Answer: A Section: (none)


QUESTION 13 What is the result of renaming an existing report log file? A. A newreport log is created. B. A duplicate report log is created. C. The original report

log is deleted. D. The original report log is overwritten. Answer: A Section: (none) Explanation/Reference:

QUESTION 14 Scenario: In order to improve the performance of multimedia streamedfrom a Citrix XenApp server to a client, an administrator considers enabling

SpeedScreen Multimedia Acceleration. Which two of the listed outcomes could result from enabling SpeedScreen Multimedia Acceleration? (Choose two.) A. Increased audio

security B. Reduced server CPU load C. Encrypted server to client graphics D. Reduced network bandwidth consumption E. Improved quality Flash animations when streamed

through a web browser Answer: BD Section: (none) Explanation/Reference: 7.

QUESTION 15 Scenario: Users complain that when opening a document in an application that contains a graphic it takes too long for the graphic to appear and the session

appears hung while the graphic loads. High resolution is NOT necessary for the users. What could the administrator do to improve the graphical response time? A. Enable

cache images to make scrolling smoother. B. Disable cache images to make

Pge p

citrixscrolling smoother. C. Set SpeedScreen Progressive Display compression level to a level higher

than image acceleration compression level. D. Set SpeedScreen Progressive Display compression level to a level lower than image acceleration compression level. Answer:

C Section: (none) Explanation/Reference:

QUESTION 16 Scenario: An administrator is planning a Citrix XenApp deployment. The administrator will use application streaming and would like the applicationsto

appear as icons on the users' Start menus. The clients will be a mixture of Windows XP and Windows Vista 32-bit edition.Which two client components are required to

meet the requirements of this scenario? (Choose two.) A. Web Interface B. Program Neighborhood C. Citrix XenApp Web Plugin D. Citrix XenApp Plugin for Hosted Apps E.

Citrix XenApp Plugin for Streamed Apps Answer: DE Section: (none) Explanation/Reference:

QUESTION 17 Scenario: A policy called Houston_Printers contains the session printers for the Houston office. It is currently filtered by IP address. A user in the

Houston office connects remotely and needs to print reports locally for other users in the Houston office. Which filter should the administrator use to apply this

policy? A. Users B. Servers C. Client Name D. Client IP Address 8. Answer: A Section: (none) Explanation/Reference:

QUESTION 18 Scenario: An administrator of a large corporation is receiving reports from the Marketing department that their session performance degrades substantially

when they are working from home or a branch office. After investigation, the administrator confirms that the majority of their work involves high resolution graphic

files which reside on file servers in the data warehouse. Users need to see the pictures to ensure their correct placement on advertisements and editorial

features.What should the administrator configure for the Marketing department toallow better performance of user sessions from home or the branch office? A. Session

bandwidth through a policy B. SpeedScreen Image Acceleration with a bandwidth threshold limit C. SpeedScreen Image Acceleration with no bandwidth threshold limit D.

SpeedScreen Image Acceleration with heavyweight compression, no bandwidth threshold limit Answer: B Section: (none) Explanation/Reference:

QUESTION 19 Click the Help button for instructions on how to complete a Drag andDrop item. Drag the steps to place them in the correct order to profile an

application. 9. A. Answer: Answer: Section: (none) Explanation/Reference:

QUESTION 20 Scenario: An administrator is configuring a new XenApp environment to support remote and streamed applications. Some of the applications will be installed

on servers in the farm and other applications will be streamed to servers or

Pge p

citrix10. desktops, and will be accessed by users through Web Interface. How should the administrator enable access to the applications? A. Configure one XenApp Website to

use dual mode streaming. B. Configure one XenApp Services site to use dual mode streaming. C. Enable offline licensing for the servers where streaming is enabled. D.

Configure the Citrix Delivery Protocol policy in order to force streamed delivery. Answer: A Section: (none) Explanation/Reference: QUESTION 21 Scenario: An administrator added a suite of applications to a farm. While monitoring the farm, the administrator notices that users are opening the

applications on various servers. Session sharing is NOT enabled. Which two stepsmust the administrator take to resolve this issue? (Choose two.) A. Enable content

redirection. B. Set all the applications to the same encryption level. C. Ensurethe applications have the same color resolution. D. Add all the applications to the

same client application folder. Answer: BC Section: (none) Explanation/Reference:

QUESTION 22 Scenario: An administrator is profiling three applications that haveversioning conflicts and cannot be installed on the same workstation. All three

applications integrate with Microsoft Office.Which profiling method can the administrator implement to enable the applications to run together on a single workstation

with the least amount of administrative effort? A. Create one profile containingall four applications. B. Create three application profiles, each including Microsoft

Office. C. Create the Microsoft Office profile and then create one profile for the three applications and link it to the Microsoft Office profile. D. Create the

Microsoft Office profile and then create three profiles, one for each of the three applications and link each profile to the Microsoft Office profile. Answer: D

Section: (none) Explanation/Reference: 11.

QUESTION 23 An administrator of a Citrix XenApp farm needs to determine the bestdelivery method based on a user profile. Identify the correct delivery method for each

user profile. Click the Help button for instructions on how to complete a Drag and Drop item. Drag the application delivery method appropriate for each user profile.

A. Answer: Answer: Section: (none) Explanation/Reference: 12.

QUESTION 24 What should an administrator use to confirm the name of a Citrix License Server? A. The queryhr command in a command prompt B. The hostname command in a

command prompt C. The basic information screen in the Windows 2008 system appletD. The server information screen in the Access Management Console Answer: B Section:

(none) Explanation/Reference:

QUESTION 25 An administrator of a Citrix XenApp farm wants an application to be

Pge p

citrixstreamed only to Windows client devices. Click the Help button for instructions on how

to complete a Hot Spot item. Click on the appropriate application type to streaman application only to Windows client devices. A cross-hair symbol will mark thespot

once selected. 13. A. Answer: Answer: Section: (none) Explanation/Reference:

QUESTION 26 An administrator needs to upgrade an application published on CitrixXenApp and plans to prevent users from trying to access that application during the

upgrade.Which two settings under the application properties can the administrator use to achieve this? (Choose two.) A. Disable the application B. Remove the shortcuts

C. Hide the disabled application D. Change the application type to streamed application 14. Answer: AC Section: (none) Explanation/Reference:

QUESTION 27 Scenario: An administrator publishing a streaming application is concerned that some of the users accessing this application might NOT be able tostream

the application to their client device. The application has NOT been installed on a Citrix XenApp server and only a profile is available to be streamed.Which option

can the administrator enable for this application to be available to all users? A. Streamed to client B. Accessed from a server C. Streamed if possible, otherwise

streamed to server D. Streamed if possible, otherwise installed application Answer: C Section: (none) Explanation/Reference:

QUESTION 28 Which two capabilities does Windows desktop streaming provide in a Citrix XenApp farm? (Choose two.) A. Allow the applications to be managed centrally but

run distributed B. Allow distributed management of applications but allows them to run centrally C. Utilize the resources of the Citrix XenApp farm first and then the

resources of the desktop D. Utilize the resources of the desktop first and then the resources of the Citrix XenApp farm Answer: AD Section: (none)


QUESTION 29 Scenario: A company acquired a remote office. The remote office users will access published resources in the farm using the XenApp Web Plugin across the

WAN. Company policy dictates that all connections to mission-critical applications such as Microsoft Outlook and SAP must be encrypted with a minimum of 128-bit (RC5)

level encryption.Which two objects must the administrator configure to secure remote client access to the server farm? (Choose two.) A. A policy that sets therequired

encryption levels as a minimum requirement B. The server properties that requireconnections at the mandated encryption levels C. The server farm properties that

require connections at the mandated encryption levels 15. D. The client options for the published applications, Microsoft Outlook and

Pge p

citrixSAP, that set the required encryption levels as a minimum requirement Answer: AD

Section: (none) Explanation/Reference:

QUESTION 30 Scenario: An administrator of a small Citrix XenApp farm has two servers and 120 Windows XP desktops. All applications are delivered to the usersthrough

ICA sessions because the desktops have limited memory and CPU resources. An additional 60 users have joined the company. The new users run Windows XP devices with

limited memory and processor capacity. The administrator needs to deliver a new application that is NOT compatible with an application already installed in the Citrix

XenApp farm.In order to deliver this application, the administrator should profile the application and publish it as a(n) __________ resource type. (Choosethe correct

option to complete the sentence.) A. streamed to client B. streamed if possible and streamed to server C. streamed if possible and installed application D. accessed

from a server and streamed to server Answer: D Section: (none) Explanation/Reference:

QUESTION 31 Scenario: An administrator enabled application streaming for a Citrix XenApp farm with Citrix XenApp servers located centrally and distributed in branch

offices. The administrator copied the application profiles to local file serversin the branch offices.In order to ensure users stream from the closest source, the

administrator must specify an alternate profile for a published application and the appropriate __________. (Choose the correct option to complete the sentence.) A.

users B. subnet C. file server IP D. Citrix XenApp server Answer: B Section: (none) Explanation/Reference:

QUESTION 32 16. Scenario: An administrator needs all full-time employees to be able to access their client drives; however, contractors will NOT be able to access the client

drives. Customer Service employees, whether they are contractors or full time, must have access to client drives. The following policies have been created to address

these needs: Contractor_Users, which disallows access to client drives Corporate_ Users, which allows access to client drives CustomerService_Users, which allows

Customer Service employees access to client drives In which order should the policies be ranked, from highest to lowest priority? A. CustomerService_Users,

Contractor_Users, Corporate_Users B. Contractor_Users, CustomerService_Users, Corporate_Users C. Corporate_Users, Contractor_Users, CustomerService_Users D.

Contractor_Users, Corporate_Users, CustomerService_Users Answer: A Section: (none) Explanation/Reference:

QUESTION 33 Scenario: Users working from a remote office connected over a satellite network are experiencing slow session performance. These users need audio and

Pge p

citrix

printing capabilities in their sessions.Which three policy rules should an administrator implement to optimize their sessions? (Choose three.) A. Sound quality B.

Print job routing C. SecureICA encryption D. Turn off menu animations E. Limit total concurrent sessions F. Turn off client printer mappings Answer: ABD Section:


QUESTION 34 An administrator is aware that there may be a conflict among the XenApp policies configured when a user logs on. Which policy filter should the

administrator use to identify the resultant policy? A. Server name B. Login domain C. Server IP address D. Web Interface server Answer: A Section: (none) 17. Explanation/Reference:

QUESTION 35 Scenario: An administrator currently has Secure Gateway and Web Interface on the same server in the DMZ. After learning about Access Gateway, the

administrator decided to purchase two units for redundancy that will be located in the DMZ and implement the increased functionality that Access Gateway offers.Two

new Web Interface servers will be introduced. Where should the administrator place the Web Interface servers? A. Both Web Interface servers should be placed in the

DMZ. B. Both Web Interface servers should be placed on the internal network. C. One Web Interface server should be placed in the DMZ, and one Web Interface server

should be placed on the internal network. D. One Web Interface server should be placed on the internal network, and one Web Interface server should be placed onthe

external network. Answer: B Section: (none) Explanation/Reference:

QUESTION 36 Users at remote sites are complaining about printing performance.Which policy rule can the administrator enable to improve printing performance at remote

locations? A. Print job routing B. Session printers C. Legacy client printers D.Printer properties retention Answer: A Section: (none) Explanation/Reference:

QUESTION 37 Scenario: An administrator at a school would like to give teachers the ability to shadow their students in the classroom. Teachers should only be able to

shadow their own students. The following Active Directory groups exist: - English Department - English 101 - English 102 - Math Department - Math 101 - Math 102 -

Science Department 18. - Science 101 - Science 102 Teachers are grouped within their departments. Students are grouped within their classes. How can the administrator configure shadowing

in the Citrix XenApp environment to meet this requirement with the least amount of administrative effort? A. Create a policy for each class, give permission to each

teacher and apply the policy to the class. B. Create a policy for all students, give permission to the class and apply the policy to the specific teachers. C. Create a

Pge p

citrixpolicy for each department, give permission to each teacher and apply the policyto the department. D. Create a policy for each teacher, give permission to each

teacher to shadow and apply the policy to the specific students of that teacher.Answer: A Section: (none) Explanation/Reference:

QUESTION 38 Scenario: An administrator is creating a pilot environment which includes a Citrix XenApp implementation with one farm and two zones. One zone will contain

the servers to be used for disaster recovery. The administrator wants to configure an automatic failover mechanism so that the servers in the disaster recovery zone

will be automatically accessed if the servers in the other zone are unavailable.What must the administrator do to configure the automatic failover mechanism for this

scenario? A. Configure the Zone Preference and Failover rule in a policy, setting the disaster recovery zone as primary and the production zone as backup.Assign the

policy to all servers. B. Configure the Zone Preference and Failover rule in a policy, setting the production zone as primary and the disaster recovery zone asbackup.

Assign the policy to all users. C. Configure the Zone Preference and Failover rule in the farm settings, setting the disaster recovery zone as primary and the

production zone as backup. Assign the setting to all users. D. Configure the Zone Preference and Failover rule in the farm settings, setting the production zone as

primary and the disaster recovery zone as backup. Assign the setting to all servers. Answer: B Section: (none) Explanation/Reference:

QUESTION 39 Which three events have an impact on the performance of the data store and should be taken into consideration when planning the hardware requirements?

(Choose three.) A. Publishing multiple applications B. Adding load evaluators toapplications C. Replicating large numbers of print drivers D. Large number of users

logging on simultaneously 19. E. Starting the Citrix IMA Service on multiple servers simultaneously Answer: ACE Section: (none) Explanation/Reference:

QUESTION 40 Scenario: A power failure has occurred in the datacenter that maintains the data store for an environment. After several users call to complain about NOT

being able to connect to applications hosted in the Citrix XenApp environment, the administrator becomes concerned about the integrity of the data within the data

store. Which utility should the administrator use to verify the integrity of thedata? A. DSMAINT B. DSCHECK C. DSVERIFY D. DSCONFIG Answer: B Section: (none)


QUESTION 41 What can an administrator refer to in order to evaluate a patch level for each server? A. Server alert B. Hotfix count C. Hotfix comparison D.

Configuration logging report Answer: C Section: (none) Explanation/Reference:

QUESTION 42 Which two types of information does the Data Collector track?

Pge p

citrix(Choose two.) A. Server load B. Load evaluator C. Policy settings D. Applicationload E.

Published application settings 20. Answer: AD Section: (none) Explanation/Reference:

QUESTION 43 At which two levels can CPU utilization be defined? (Choose two.) A.Zone B. Farm C. Policy D. Server Answer: BD Section: (none) Explanation/Reference:

QUESTION 44 According to Citrix best practice, only one server per zone should be given a preference setting of __________. (Choose the correct option to complete the

sentence.) A. Preferred B. Not Preferred C. Most Preferred D. Default PreferenceAnswer: C Section: (none) Explanation/Reference:

QUESTION 45 From where can an administrator access a graphical view of a load evaluator currently in use by a particular server? A. Logging Tab in the XenApp Advanced

Configuration tool B. Load Evaluators node in the Access Management Console C. Assign Load Evaluator option in the Access Management Console D. Load Manager Monitor

tab on the server node in the XenApp Advanced Configuration tool Answer: D Section: (none) 21. Explanation/Reference:

QUESTION 46 Scenario: An administrator at a graphic design company has recently completed a XenApp implementation. Web Interface has been configured to allow remote

users to access their published applications and all clients are made available through the client deployment configuration. Both internal and remote users are running

MAC operating systems with a mixture of Internet Explorer and Safari Browser. Which client will be used by default if a user is connecting from a Safari Browser? A.

Native Client B. Client for Java C. Embedded Native Client D. Remote Desktop Connection Answer: B Section: (none) Explanation/Reference:

QUESTION 47 A new IT policy requires the use of configuration logging.What is the first step the administrator must take to set up configuration logging? A. Create a

configuration logging database. B. Configure the configuration logging settings.C. Create report specification for configuration logging reports. D. Configure a

connection between the Citrix XenApp server and the configuration logging database. Answer: A Section: (none) Explanation/Reference:

QUESTION 48 An administrator notices that a resource-intensive published application is accessed often during backup of the server.Which load evaluator rule can the

administrator configure to prevent this? A. Scheduling B. Load Throttling C. Server User Load D. Application User Load Answer: A Section: (none) 22. Explanation/Reference:

QUESTION 49 Scenario: A senior administrator of a Citrix XenApp farm needs to delegate administration of servers within the farm that are only used in the Engineering

department to the new administrator for the Engineering department. The

Pge p

citrixadministrator has created an Engineering sub-folder within the Servers folder inthe Access

Management Console and provided the administrator with appropriate permissions to the sub-folder. The administrator of the Engineering department attempts to manage

the servers, but finds there are no servers to manage.Which additional step doesthe senior administrator need to perform in order for the administrator of the

Engineering department to manage the servers? A. Move the servers to the Engineering sub-folder. B. Add the administrator to the local administrators group. C. Give

the administrator Administration privileges to the server folder. D. Give the administrator Full Administration privileges to the Engineering sub-folder. Answer: A


QUESTION 50 Which two statements are correct regarding load evaluators? (Choose two.) A. The default load evaluator cannot be changed. B. The advanced load evaluator

is attached to all servers by default. C. Multiple load evaluators cannot be attached simultaneously to a single server. D. The Load Monitor log identifies the name of

the load evaluator used for each connection. Answer: AC Section: (none) Explanation/Reference:

QUESTION 51 How can an administrator enable XML Service Trust? A. Modify farm properties B. Modify server properties C. Run the CTXXMLSS command D. Use the

configuration tools in Citrix Resources Answer: B 23. Section: (none) Explanation/Reference:

QUESTION 52 Where are restart schedules managed in a Citrix XenApp farm? A. Microsoft Management Console B. Citrix SSL Relay Configuration tool C. Citrix Access

Management Console D. XenApp Advanced Configuration tool Answer: C Section: (none) Explanation/Reference:

QUESTION 53 Scenario: A published application on Citrix XenApp requires a nativedriver to print properly. Currently session printers are NOT being used; only auto-

created client printers are being used in the environment. The administrator needs to ensure that the proper native drivers are used consistently.On which two

components should the native driver be installed? (Choose two.) A. Client workstation B. Citrix XenApp server C. Secure Gateway server D. Stand alone Web Interface

server Answer: AB Section: (none) Explanation/Reference:

QUESTION 54 Scenario: A new environment for a call center was designed to use only network printers. Client devices are thoroughly locked-down, client printermapping

is disabled and a Terminal Services mandatory profile is implemented. The administrator successfully imported the network print server and created a new printing

policy named Call Center Printing for this environment.Which policy rule should the administrator configure to provision printers at logon? A. Auto-creation B.

Pge p

citrix

Universal driver C. Session printers 24. D. Printer properties retention Answer: C Section: (none) Explanation/Reference:

QUESTION 55 Scenario: An administrator is configuring printing policies for a new office. Users in this office only need to have access to the default printerdefined

within the Printers and Faxes folder on the client. Which printing policy rule allows the administrator to configure this behavior? A. Auto-creation B. Session

printers C. Legacy client printers D. Printer properties retention Answer: A Section: (none) Explanation/Reference:

QUESTION 56 Scenario: The Research department purchased new printers and added them to workstations within the department as local printers. This was NOT coordinated

with IT or the administrators. Why can these users print to the new printers? A.A print policy allows auto-install of all client printers. B. A print policy to

configure legacy printers is enabled. C. A print policy for native printer auto-install is enabled. D. A print policy allows auto-creation of the clients default

printer only. Answer: C Section: (none) Explanation/Reference:

QUESTION 57 Scenario: A single Web Interface server named xenappweb1.mycompany.com is currently being leveraged to host applications for Citrix users through HTTP. For

additional redundancy and security as required by management, a second Web Interface server named xenappweb2.mycompany.com will be made available and load-balanced

with a hardware load balancer and SSL will be used to secure all traffic to the Web Interface servers.In order to configure the environment to meet the requirements

defined above, which three statements are valid 25. configuration steps? (Choose three.) A. Install a separate SSL certificate on each server that matches the FQDN of each server. B. Install a root certificate on

each Web Interface server that matches the certificate on the load balancer. C. Create a new DNS entry for xenapp.mycompany.com and assign it the IP address of the VIP

on the hardware load balancer. D. Create a new CNAME alias in DNS for xenapp.mycompany.com and add both Web Interface server names to the record for load balancing. E.

Create a new load balancing group on the load balancer that contains the Web Interface sites from each Web Interface server that are to be load balanced. Answer: BCE


QUESTION 58 Scenario: In a company with numerous network printers, many users have five or more network printers defined on their client device. The users' client

devices have one printer connected directly and always marked as the default printer. The administrator is trying to prohibit the use of network printers in their ICA

Pge p

citrixsessions.Which two policies could be enabled to ensure the desired outcome? (Choose two.) A. Auto-create all client printers B. Do not auto-create client printers C.

Auto-create the client's default printer only D. Auto-create local (non-network)client printers only Answer: CD Section: (none) Explanation/Reference:

QUESTION 59 An administrator wants to use the previously used Citrix XenApp naming convention for printers instead of the dynamic printer naming used by Terminal

Services.Which policy should the administrator configure to accomplish this? A. Legacy client printers B. Printer properties retention C. Turn off client printer

mapping D. Native printer driver auto-install Answer: A Section: (none) Explanation/Reference: 26.

QUESTION 60 Scenario: An administrator needs to adjust security settings of a printer in another session in order to troubleshoot an issue. The Admins Can Manage

registry key was added to the registry. The administrator can get to a printer in another session through __________. (Choose the correct option to complete the

sentence.) A. Windows Explorer B. Windows Terminal Services C. the Access Management Console D. the XenApp Advanced Configuration tool Answer: A Section: (none)


QUESTION 61 Scenario: A 75-server Citrix XenApp farm has two zones configured, one in Los Angles and another in San Francisco. Due to past print driver issues,a

dedicated Citrix XenApp server assumes the role of a print driver replication server for third-party print drivers. Print drivers are installed on this serverand

validated first before the driver is installed or replicated to the other servers. How could the administrator configure the distribution of print driversto the other

servers in the farm with the least amount of performance impact and administrative effort? A. Manually replicate the drivers. B. Import a network print server. C.

Install drivers manually on each server. D. Configure a policy to automatically install Windows native drivers as needed. Answer: A Section: (none)


QUESTION 62 Scenario: At headquarters, where Citrix XenApp is implemented, thereare 20 printers installed and configured. Users in remote offices use printers that

are installed locally.Which option should the administrator enable to ensure that remote users can print from published applications to the 20 printers and to their

local printers? A. Use universal driver only B. Native printer driver auto-install C. Universal Print Driver auto-install D. Use only printer model-specific drivers

Answer: A 27. Section: (none) Explanation/Reference:

Pge p

citrix

QUESTION 63 Four new servers are being brought online for the Central Office farm. What can an administrator use to load the print drivers on the servers with the

least amount of administrative overhead? A. Printing policy B. Driver mapping C.Auto-replication D. Printer replication Answer: C Section: (none)


QUESTION 64 Scenario: An administrator is testing a new manufacturer's print driver using a Citrix diagnostic tool which was designed to debug some printing issues.

During testing, an error notification is delivered stating that the driver has crashed. Where does the administrator find the information regarding the crash? A.

Configuration Log B. StressPrinters Log C. Access Management Console D. XenApp Advanced Configuration Answer: B Section: (none) Explanation/Reference:

QUESTION 65 Scenario: An administrator is attempting to troubleshoot a Web Interface issue being reported by remote users. Users had been using Web Interface to access

their published applications with no issue for a week. Now users indicate that they are able to access the Web Interface logon page and successfully authenticate, but

no published application icons are displayed. The administrator confirms that the Independent Management Architecture Service is communicating correctly. BothRDP and

ICA connection to the Citrix XenApp server are successful.Which Citrix service should the administrator restart to try to troubleshoot the issue? A. XML B. XTEServer

C. Client Network 28. D. Independent Management Architecture Answer: A Section: (none) Explanation/Reference:

QUESTION 66 Due to an issue with a XenApp service, Health Monitor and Recovery Services has removed the Citrix XenApp server, Server 1, from the farm. After resolving

the service issue, which command line utility can an administrator use to add the server back in for load balancing? A. qserver /load B. qserver /reset C. enablelb

Server1 D. qfarm /ltload Server1 Answer: C Section: (none) Explanation/Reference:

QUESTION 67 Scenario: Following a review of security settings in a Citrix XenAppenvironment, users are unable to access their local client drives from their ICA

sessions. The administrator has confirmed that all Citrix settings are correct and are NOT the cause of the issue. Which tool could be used to identify where local

client drive access is being disabled? A. Clipboard Viewer B. TS Remote App Manager C. Terminal Services Manager D. Terminal Services Configuration Answer: D Section:


QUESTION 68 After creating a XenApp Web site, an administrator must configure the __________ and __________. (Choose the two correct options to complete the

Pge p

citrixsentence.)

A. farm zone B. name of the farm 29. C. name of one or more servers in the farm D. name of published applicationsaccessible through the site Answer: BC Section: (none) Explanation/Reference:

QUESTION 69 Users are unable to connect to the Citrix XenApp server and are receiving a message that says "The Citrix server is not accepting connections."In order to

correct this issue, the administrator should __________ and __________. (Choose the two correct phrases to complete the sentence.) A. telnet to port 1494 B. ensure the

IMA Service is running C. verify policies using the Policy Search engine D. check application user permissions in the Access Management Console Answer: AB Section:


QUESTION 70 Scenario: An administrator has published Microsoft Terminal ServicesClient (mstsc) which can be accessed through the Web Interface server. The Web

Interface server has an IP address of 192.168.1.20. Users who are attempting to use the Windows remote desktop connection tool cannot access published applications.

The administrator did NOT change the default settings.Which command should the administrator run to determine if the Web Interface server will accept native Windows

connections? A. mstsc 192.168.1.20 B. termsrv 192.168.1.20 C. telnet 192.168.1.20 1494 D. telnet 192.168.1.20 3389 Answer: D Section: (none) Explanation/Reference:

QUESTION 71 Scenario: Following a power surge in a data center, a number of critical components were destroyed including the firewall and router. The company disaster

recovery policy ensured that the necessary components were recovered and the company was back online within four hours. While users connecting through the VPN and LAN

can access 30. applications without any problem, those using a public internet terminal cannot establish an ICA connection. After testing, the administrator discovers that he can

complete an RDP connection externally.The administrator should check that __________. (Choose the correct phrase to complete the sentence.) A. the IMA service is

running on the Citrix XenApp servers B. port 1494 is open for inbound connections on the firewall C. port 1494 is open for outbound connections on thefirewall D. the

XenApp Web site is configured to use the Client for Java only Answer: B Section:(none) Explanation/Reference:

QUESTION 72 Scenario: An administrator implemented a Web Interface/Secure Gateway solution as shown in the attached exhibit. The firewall administrator requested

information on which ports are required to be opened between the Secure Gateway/Web Interface server and the Citrix XenApp servers. Which two of the listed ports may

need to be opened to allow users to launch an application and why? (Choose two.)

Pge p

citrixA. Port 1494 for ICA traffic B. Port 2512 for IMA traffic C. Port 2513 for IMA traffic

D. Port 2598 for session reliability 31. E. Port 27000 for Citrix XenApp licensing Answer: AD Section: (none) Explanation/Reference:

QUESTION 73 Scenario: An administrator has a small Citrix XenApp farm. All userswill access the farm through Web Interface. A small number of users have laptopsand

will require offline access to office applications as well as hosted applications.Which two steps are required to configure the Web Interface? (Choose two.) A. Create

a XenApp Web site. B. Create a XenApp Services site. C. Ensure the resource typeis set to remote. D. Ensure the resource type is set to streaming. E. Ensure the

resource type is set to dual mode streaming. Answer: BE Section: (none) Explanation/Reference:

QUESTION 74 Scenario: An administrator wants to implement the Citrix Secure Gateway so that remote users can access their applications securely over the Web. There is

a separate Secure Gateway and Web Interface server that is in a single-hop DMZ. There are 20 Citrix XenApp servers on the internal LAN hosting three applications. The

administrator decided to use an internal Certification Authority to generate a signed certificate. In order to establish a successful client connection throughCitrix

Secure Gateway, an administrator should install __________ and __________. (Choose the two correct statements to complete the sentence.) A. a root server certificate

on a client machine B. a server certificate on a Web Interface server C. a server certificate on a Secure Gateway server D. a root server certificate on a Web

Interface server Answer: AC Section: (none) Explanation/Reference:

QUESTION 75 Scenario: An administrator installed the XenApp Advanced Configuration tool to administer a Citrix XenApp server 32. remotely. The server is accessed through a WAN link and it is behind a firewall. Which TCP port should be opened on the firewall to allow the administrator to

connect remotely by means of the XenApp Advanced Configuration tool? A. 1494 B. 2512 C. 2513 D. 2598 Answer: C Section: (none) Explanation/Reference:

QUESTION 76 The Web Interface server communicates directly with which component in the Citrix XenApp farm to obtain application lists? A. Data store B. Data Collector

C. Secure Gateway D. Citrix XML Service Answer: D Section: (none) Explanation/Reference:

QUESTION 77 Scenario: Users complained that they cannot launch an application when connecting through a XenApp Web site. They are able to authenticate and cansee

their list of published applications; however, they cannot launch an application. The users receive an error message stating that no server can be found at the

Pge p

citrixlocation specified. What is a possible cause of this issue? A. The Data Collector is down. B. The users have authenticated against the wrong domain. C. The Citrix

XenApp server does NOT have pass-through enabled. D. The XenApp Web site is reporting the wrong Citrix XenApp server address. Answer: D Section: (none)


QUESTION 78 33. Scenario: Following the acquisition of a small publishing firm, an administrator integrated the applications of the acquired firm into the existingCitrix XenApp

farm. Users who access the published application are now reporting that the quality of the graphics have degraded significantly. These users connect over a WAN link

from their offices to the Citrix XenApp farm. It is crucial that users of the published applications do NOT have their image quality degraded. Which step should the

administrator take to resolve this? A. Disable TWAIN Redirection. B. Disable SpeedScreen Image Acceleration. C. Set the Image Acceleration compression level to medium.

D. Enable heavyweight compression in the SpeedScreen policy rule. Answer: B Section: (none) Explanation/Reference:

QUESTION 79 Scenario: An administrator configured a session bandwidth policy. The administrator set a maximum bandwidth rule of 200 Kbps and placed a 50 Kbps and a 30%

restriction on the audio channel.The effective bandwidth for the audio channel will be __________ Kbps. (Choose the correct option to complete the sentence.) A. 15 B.

50 C. 60 D. 200 Answer: B Section: (none) Explanation/Reference:

QUESTION 80 Some users in the Finance department experience delays when opening published Microsoft Outlook e-mails that are in HTML format and contain graphics. Which

SpeedScreen solution should be configured to optimize the user experience and how? A. Browser Acceleration at the client level B. Latency Reduction at the application

level C. Latency Reduction at the server farm level D. Browser Acceleration at the server farm level Answer: D Section: (none) Explanation/Reference: 34.

QUESTION 81 Scenario: An administrator decided to make a number of video-based training packages available to the Finance department through Citrix XenApp. TheCitrix

XenApp farm silo's its applications and all Finance applications are in the Finance application silo. Other application silos include Technical, Sales and

Workflow.Where can an administrator enable multimedia optimization for the finance training applications? A. Server properties B. Server farm properties C.A policy

applied to all Finance users D. A policy applied to all servers in the Finance application silo Answer: A Section: (none) Explanation/Reference:

QUESTION 82 Sound Quality, Special Folder Redirection and Turn off LPT ports arepart of which set of rules in a policy? A. Bandwidth B. Service Level C. Client

Pge p

citrixDevices D. User Workspace Answer: C Section: (none) Explanation/Reference:

QUESTION 83 Scenario: An administrator recently deployed a new application to allow doctors to access patient radiology images from any desktop within their regional

health network. The doctors are complaining about the lack of quality of the radiology images and the time it takes to load them.Which SpeedScreen technologywill

resolve this issue? A. Latency Reduction B. Progressive Display C. Browser Acceleration D. Multimedia Acceleration Answer: B Section: (none) 35. Explanation/Reference:

QUESTION 84 Scenario: Currently, a Citrix XenApp farm at an organization does NOT silo applications. Users are reporting that web- based training animations are NOT

smooth and are difficult to view.What is the quickest method an administrator can use to optimize the animations? A. Create a new policy. B. Modify ICA-tcp security

configurations. C. Modify SpeedScreen Flash Acceleration in the farm properties.D. Configure SpeedScreen Progressive Display in the server properties. Answer: C


QUESTION 85 Scenario: An administrator is planning a Citrix XenApp deployment. Clients will be newly-installed with the deployment of Citrix XenApp. Based on the

reequirements listed below, identify which client component will meet each requirement. Click the Help button for instructions on how to complete a Drag and Drop item.

Drag the appropriate client component that will meet each listed requirement. A single client component may be used more than once. 36. A. Answer: Answer: Section: (none) Explanation/Reference:

QUESTION 86 Scenario: An administrator is in the process of implementing zone preference and failover for a Citrix XenApp farm. The administrator already configured a

Citrix policy named "ZPF Policy." Which three filters can the administrator use to apply this policy and implement zone preference and failover? (Choose three.)A.

Users B. Servers C. Client Name D. Access Control E. Client IP Address Answer: ACE Section: (none) Explanation/Reference:

QUESTION 87 37. Which tool should an administrator use to manage policies in a Citrix XenAppfarm? A. Access Management Console B. Microsoft Management Console C. Terminal

Services Configuration D. XenApp Advanced Configuration Answer: D Section: (none) Explanation/Reference:

QUESTION 88 Scenario: Users complain that when opening a document in an application that contains a graphic it takes too long for the graphic to appear and the session

appears hung while the graphic loads. High resolution is NOT necessary for the users. What could the administrator do to improve the graphical response time? A. Enable

cache images to make scrolling smoother. B. Disable cache images to make scrolling smoother. C. Set SpeedScreen Progressive Display compression level to

Pge p

citrixa level higher

than image acceleration compression level. D. Set SpeedScreen Progressive Display compression level to a level lower than image acceleration compression level. Answer:

C Section: (none) Explanation/Reference:

QUESTION 89 Scenario: An administrator of a Citrix XenApp farm needs to deliver Citrix XenApp plugins to users. It is a small environment and the administrator does

NOT have a delivery tool. Some desktops are part of workgroups in branches, while other desktops are members of an Active Directory domain. Of the listed options, the

administrator should deliver the plugins through __________ with the least administrative effort. (Choose the correct option to complete the sentence.) A. a network

share B. FTP to the desktop C. application streaming D. Active Directory group policy Answer: A Section: (none) Explanation/Reference: 38.

QUESTION 90 Which SpeedScreen technology can be adjusted using Citrix policies? A. Flash Acceleration B. Image Acceleration C. Browser Acceleration D. Multimedia

Acceleration Answer: B Section: (none) Explanation/Reference:

QUESTION 91 To override the delivery protocol for applications streamed to the client, an administrator should create a policy to force ___________. (Choose the

correct option to complete the sentence.) A. server access B. application installation C. installation on Windows CE devices D. the amount of bandwidth allocated to

streamed applications Answer: A Section: (none) Explanation/Reference:

QUESTION 92 Scenario: An administrator needs to deliver a common set of productivity applications within the Marketing department. IT has recently issued new Windows-

based laptops to all users in the Marketing department. The user population works in environments where remote connectivity is NOT available at all times. None of the

applications have been installed on the Citrix XenApp servers.Which delivery option should the administrator configure for this environment? A. Streamed to client B.

Accessed from a server C. Streamed if possible, otherwise streamed to server D. Streamed if possible, otherwise installed application Answer: A Section: (none)

Explanation/Reference: 39.

QUESTION 93 An administrator has been tasked with deploying Microsoft Office 2007 to 20 Citrix XenApp Servers within a farm. Which method of deployment wouldtake the

least amount of time to complete and be the easiest to maintain? A. Install Office 2007 on each server individually. B. Create an application profile for Office 2007

and stream it to the clients. C. Create an application profile for Office 2007 and stream it to the Citrix XenApp servers. D. Create an application profile for

Pge p

citrixOffice

2007 and deploy it using an Active Directory GPO. Answer: C Section: (none) Explanation/Reference:

QUESTION 94 Scenario: An administrator is in charge of a mixed Citrix XenApp farm based on Windows Server 2003 and Windows Server 2008 as well as Windows XP and

Windows Vista devices. Several applications which will be delivered by means of streaming will only run on Windows XP.In order to ensure the streamed applications will

function correctly on the appropriate device, the administrator should profile the applications based on Windows __________. (Choose the correct option to complete the

sentence.) A. XP B. Vista C. Server 2003 D. Server 2008 Answer: A Section: (none) Explanation/Reference:

QUESTION 95 An administrator must stream applications to Windows Vista laptops from a Citrix XenApp farm.Which three steps must the administrator take to create the

applications for streaming? (Choose three.) A. Copy the application to a XenApp server. B. Copy the application profile to the file server. C. Profile the application

on a Windows Vista desktop. D. Profile the application on Windows Server 2008 server. E. Publish the application by entering the UNC path of the application profile.

F. Publish the application by entering the UNC path of the application executable. Answer: BCE 40. Section: (none) Explanation/Reference:

QUESTION 96 Scenario: An administrator must configure all existing published applications and desktops with encryption and ensure it is enforced each time a connection

is made to the published resource. Clients use the Citrix XenApp plugin to connect to published resources.Which step must the administrator take to ensure ICA session

traffic is encrypted in all circumstances? A. Enable encryption in the application properties. B. Enable SSL and TLS Protocols in the application properties. C.

Disable Allow All Other Connections in the application properties. D. Disable Allow All Connections in the Terminal Services Configuration tool. Answer: A Section:


QUESTION 97 Session reliability is based on which Citrix service? A. IMA B. XML C. XTE D. Services Manager Answer: C Section: (none) Explanation/Reference:

QUESTION 98 An administrator needs to upgrade an application published on CitrixXenApp and plans to prevent users from trying to access that application during the

upgrade.Which two settings under the application properties can the administrator use to achieve this? (Choose two.) A. Disable the application B. Remove the shortcuts

C. Hide the disabled application D. Change the application type to streamed application Answer: AC 41. Section: (none) Explanation/Reference:

Pge p

citrix

QUESTION 99 Scenario: Users are complaining that it takes an excessive amount oftime to open attachments in their email. The administrator investigates this and

realizes that the attachment application is opening on another server.After installing the applications on the same server as the email server, what should the

administrator do to resolve this issue? A. Enable session sharing. B. Enable content redirection. C. Configure the Load Balance Evaluator. D. Configure connection

limits in the farm properties. Answer: A Section: (none) Explanation/Reference:

QUESTION 100 For which three scenarios should an administrator configure application streaming? (Choose three.) A. Delivering an application that installs a service.

B. Delivering a web-based application to a desktop. C. Delivering Microsoft Wordto a laptop user that travels. D. Delivering helper applications for streamed

applications. E. Delivering incompatible applications to a single Citrix XenApp server. Answer: CDE Section: (none) Explanation/Reference:

QUESTION 101 Scenario: During the process of publishing an application, an administrator does NOT configure the advanced application settings. All settingson the farm

and all servers are the default settings. Which two features will NOT be available for the users accessing the application? (Choose two.) A. Connection encryption B.

Custom application icon C. Application authentication type D. Client to server content redirection 42. Answer: AD Section: (none) Explanation/Reference:

QUESTION 102 An administrator has enabled offline access of streamed applications to a group of users. Which two steps could the administrator take to control when

Citrix XenApp caches the application? (Choose two.) A. Schedule it from the XenApp Web site B. Run RADEDEPLOY.EXE from the client C. Schedule it from the Citrix

Delivery Client D. Cache at launch from the application properties Answer: BD Section: (none) Explanation/Reference:

QUESTION 103 Scenario: An administrator enabled offline access for 30 days. Due to an unforeseen event a user will be offline for 40 days. The user called the

administrator and asked for the license to be extended for an additional 10 days. What should the administrator do to facilitate the user's request? A. Update the

offline access period to 40 days. B. Leave the offline access period at 30 days and ask the user to reconnect to the network. C. Update the offline access period to 40

days and ask the user to reconnect to the network. D. Update the offline access period to 10 days and ask the user to reconnect to the network. Answer: B Section:


QUESTION 104 Scenario: When users log on from one specific branch office, they are reporting that the behavior of their sessions is not as expected and that they

Pge p

citrix

cannot access their local client drives. The administrator decides to check XenApp policies.Which tool will allow the administrator to confirm which policy rules are

enforced for the branch office? A. Command prompt B. Access Management Console C. Terminal Services Configuration 43. D. XenApp Advanced Configuration Answer: D Section: (none) Explanation/Reference:

QUESTION 105 Scenario: A company has one remote office. Users in the remote office access published applications on servers running Citrix XenApp over a WANconnection

and often are troubled with latency and bandwidth issues. The administrator has created a policy to address the latency and bandwidth issues and wants to apply the

policy to client IP addresses that correlate to the ranges assigned to client devices in the remote office.Which three steps must the administrator take to apply the

policy? (Choose three.) A. Apply the policy at client login. B. Select the Client IP address filter. C. Apply the filter to all client IP addresses. D. Specify start

and end ranges for IP addresses. E. Apply the filter to a select range of clientIP addresses and allow access. Answer: BDE Section: (none) Explanation/Reference:

QUESTION 106 Scenario: Users are reporting slow login times when connecting to servers running Citrix XenApp and the administrator notices that the users have multiple

printers on their client devices. The administrator decides to connect only the main printer when users log in. Which policy rule can the administrator use to enable

this functionality? A. Auto-creation B. Print job routing C. Legacy client printers D. Turn off client printer mapping Answer: A Section: (none) Explanation/Reference:

QUESTION 107 Scenario: A user in the Sales department who travels frequently hasthe following XenApp policies applied and ranked in this order, from highest to lowest

priority: 44. Sales_Users, which sets the encryption to 56-bit Remote_Users, which sets the encryption to 128-bit All_Users, which sets the encryption to 40-bit Which encryption

level will be applied when the user is traveling? A. 40 B. 56 C. 64 D. 128 Answer: B Section: (none) Explanation/Reference:

QUESTION 108 An administrator is installing Web Interface in order to support Windows laptop users that require offline applications.Which type of site shouldthe

administrator create to support these users? A. XenApp Web B. XenApp Services C.Web Interface for SharePoint D. XenApp Plugin for Streamed Apps Answer: B Section:


QUESTION 109 Scenario: An administrator recently implemented Citrix XenApp and plans to use the shadowing feature to improve help desk activities. The administrator

Pge p

citrixwants the help desk personnel to be able to shadow all users in the company domain and manipulate their sessions remotely. For security and privacy reasons,the

administrator needs to ensure that users must accept shadowing before help desk personnel can shadow them. During the Citrix XenApp installation, the administrator

allowed shadowing but did NOT configure any settings for remote control or shadow acceptance. The administrator has just created a policy titled "Shadowing." Which

three steps must the administrator take to meet the requirements of this scenario? (Choose three.) A. Apply the policy to all users. B. Apply the policy to help desk

users only. C. Enable permissions for all users and set status to allow. D. Enable permisssions for all help desk users and set status to allow. E. Enable shadowing in

a policy and prohibit being shadowed without notification. F. Enable shadowing in a policy and prohibit remote input when being shadowed. Answer: ADE Section: (none) 45. Explanation/Reference:

QUESTION 110 Scenario: An administrator has created three XenApp policies calledAustin, Dallas and Houston. The Austin policy sets up session printers for the Austin

location based on the subnet. The Dallas policy sets up session printers for Dallas based on user groups. The Houston policy sets up session printers for Houston and

is applied to all the servers in the farm. As a result of these policies, if a user from Dallas is working from Austin, the user will have __________ printers.(Choose

the correct option to complete the sentence.) A. only the Dallas B. only the Austin C. the Dallas and Austin D. the Austin, Dallas and Houston Answer: D Section:


QUESTION 111 Scenario: An administrator was asked to enable configuration logging so that all administrative changes made to a Citrix XenApp farm are logged. The

organization has a farm located in Los Angeles and another farm for disaster recovery located in Arizona. The requirement is to have configuration logging set up for

both farms.How many configuration logging database(s) would the administrator need to set up to meet the requirements of the scenario? A. 1 B. 2 C. 3 D. 4 Answer: B


QUESTION 112 Scenario: An administrator plans to deliver a CPU-intensive application and has determined that CPU Utilization Management should be implemented. This

will be the only application available to users on this server. Based on testing, the administrator expects to maximize each server at 40 users with the assumption

that only this application is being delivered.What will be the maximum CPU slicethat would be allocated to each user without affecting the server itself? 46. A. 2% B. 3% C. 4% D. 5% Answer: A Section: (none) Explanation/Reference:

Pge p

citrix

QUESTION 113 Where can the Data Collector name, zone and election preference be configured? A. Active Directory B. Access Management Console C. License Management

Console D. XenApp Advanced Configuration tool Answer: D Section: (none) Explanation/Reference:

QUESTION 114 Scenario: An administrator is in the process of setting up a new Citrix XenApp Server farm. The administrator plans on using Microsoft SQL Serveras the

data store. What is the minimum database role required in order for the administrator to connect to the data store during setup? A. db_writer B. dbcreator C. sysadmin

D. db_owner Answer: D Section: (none) Explanation/Reference:

QUESTION 115 Scenario: The helpdesk receives a number of calls daily regarding frozen applications and disconnected sessions. In order to relieve the administrators of

this burden, a decision has been made to allow the helpdesk the ability to perform certain administrative tasks within the farm.When delegating administrative rights

to the helpdesk, which three rights will be required in order to assist with resolving the issues described above? (Choose three.) 47. A. Reset Sessions B. Connect Sessions C. Terminate Processes D. View SessionManagement E. Publish Applications and Edit Properties Answer: ACD Section: (none)


QUESTION 116 Which two options could be configured for the XML Service? (Choose two.) A. IIS port B. TCP/IP port C. XML Service Trust D. Configuration Logging Answer:

BC Section: (none) Explanation/Reference:

QUESTION 117 Which two types of information are contained in the data store? (Choose two.) A. Server loads B. Farm configurations C. Printer configurations D. Citrix

Access Licenses Answer: BC Section: (none) Explanation/Reference:

QUESTION 118 An administrator should implement a restart schedule on a server with __________. (Choose the correct option to complete the sentence.) A. a memory leak

B. a down ICA listener 48. C. low page file utilization D. high processor utilization Answer: A Section: (none) Explanation/Reference:

QUESTION 119 An administrator was notified that the database server hosting the Citrix data store is down and decides to restore a backup database to a new server. In

which order should the administrator complete the required steps to direct Citrix communication to the new database server? Click the Help button for instructions on

how to complete a Drag and Drop item. Drag the steps to place them in the correct order required to direct Citrix communication to the new database server. A. Answer:

Answer: Section: (none) Explanation/Reference:

Pge p

citrixQUESTION 120 On which set of rules is the default load evaluator based? A. Page Faults, Load Throttling 49. B. CPU utilization, Page Faults C. CPU utilization, Load Throttling D. Server User Load, Load Throttling Answer: D Section: (none) Explanation/Reference:

QUESTION 121 Scenario: An administrator is developing a script, which will evaluate the application load within the farm at certain intervals and page the

administrator once a certain threshold for any application has been reached. Which command should the administrator run to determine the load of published applications

within the farm? A. QFARM /APP B. QFARM /LOAD C. QFARM /LTLOAD D. QFARM /SERVERSAnswer: A Section: (none) Explanation/Reference:

QUESTION 122 Scenario: An administrator configured the Hotfix Manager to monitorthe Citrix Patch level for all Citrix XenApp servers in the environment. While

testing, the administrator discovered that a new hotfix will have a negative impact on a specialized application. The same hotfix resolves a serious problem on all of

the other servers in the farm.The administrator wants to deploy the patch to allservers except for those with the specialized application and use the Hotfix Manager

to confirm that the hotfix is NOT deployed to the servers with the specialized application. Which two steps could the administrator take to meet the requirements of

the scenario? (Choose two.) A. Edit the hotfix list at the server level. B. Editthe hotfix scope at the farm level. C. Create a new hotfix list at the server level.

D. Edit the hotfix list for server comparison at the farm level. Answer: AC Section: (none) Explanation/Reference:

QUESTION 123 Scenario: 50. An administrator realizes that one of the Citrix XenApp servers has had an unusually large number of concurrent connection attempts in the last hour. Upon further

investigation, the administrator discovers that a custom load evaluator is reporting high server load values. What should the administrator do to resolve this issue?

A. Log off all users and restart the server. B. Add the Load Throttling rule to the custom load evaluator. C. Apply the custom load evaluator to the applications on

the server. D. Configure published application properties to limit the number ofconnections. Answer: B Section: (none) Explanation/Reference:

QUESTION 124 Which preference setting should be applied to a Citrix XenApp server that is designed to take over the role of Data Collector in the event that the

current Data Collector becomes unavailable? A. Preferred B. Not Preferred C. Most Preferred D. Default Preference Answer: A Section: (none) Explanation/Reference:

QUESTION 125 An administrator enables the Print job routing rule and selected the 'connect directly to a network print server if possible' option for all users on the

second floor of a company's building. As a result, when printing from within a session, their print job will be routed from __________ to the print server

Pge p

citrixwhenever

possible. (Choose the correct phrase to complete the sentence.) A. their workstation B. the Citrix XenApp server C. their workstation to the Citrix XenApp server D.

the Citrix XenApp server to their workstation Answer: B Section: (none) Explanation/Reference:

QUESTION 126 51. Scenario: An administrator has added eight new network printer plotters for Citrix XenApp server users only. The plotters are all attached to the same print

server. The administrator has installed and tested the drivers and printers. Howwould the administrator make these plotters available to users? A. Turn off Printer

mapping B. Disable Universal Print Driver C. Configure the Session Printer policy rule D. Modify the Printer policy to auto-create all printers Answer: C Section:


QUESTION 127 Auto-created printers are generated from _______. (Please choose the correct phrase to complete the sentence.) A. all network printers B. local client

printers only C. all locally-defined printers D. local network printers only Answer: C Section: (none) Explanation/Reference:

QUESTION 128 Scenario: An administrator is configuring printing for a new call center. All the printers in the call center are connected to a network so that they can

be accessed as shared resources. The administrator wants to configure a policy so that print requests go directly from the Citrix XenApp server to the print server.

Which two policy rules could the administrator configure in order to meet the requirements for the call center printing policy? (Choose two.) A. Print job routing B.

Universal driver C. Session printers D. Legacy client printers Answer: AC Section: (none) Explanation/Reference: 52.

QUESTION 129 Scenario: At headquarters, where Citrix XenApp is implemented, there are five printers installed and configured by IT staff. In remote offices,users are

required to install and manage local printers on their own.Which option should the administrator enable to ensure that remote users can print from published

applications to the five printers and to their local printers regardless of printer model? A. Auto-install native printer drivers B. Auto-install the Universal Print

Driver C. Use only printer model-specific drivers D. Use the universal printer driver only if the requested driver is unavailable Answer: D Section: (none)


QUESTION 130 The Citrix License Management Console runs on which two supported web servers? (Choose two.) A. IBM HTTP Server B. Apache HTTP Server C. SUN Java System

Web Server D. Microsoft Internet Information Services (IIS) Answer: BD Section:

Pge p

citrix(none) Explanation/Reference:

QUESTION 131 Scenario: An administrator received reports from users about slow session performance when printing large documents during an ICA session. The users are

connecting to the Citrix XenApp server over a WAN link. The administrator confirms that the 'Always connect indirectly as client printer' option within the Print job

routing rule is enabled and that no other policy is conflicting or has a higher priority than this one.Which additional step can the administrator take to maintain the

performance of the session when printing large documents? A. Disable Print job routing B. Enable Session printers C. Disable Universal driver D. Enable Print session

limits Answer: D Section: (none) 53. Explanation/Reference:

QUESTION 132 Scenario: An administrator at Company A recently implemented a Citrix XenApp environment. The administrator is planning to leverage the use of the Citrix

Universal XPS print driver as part of an environmentally friendly workplace initiative.Which client device requirement is needed at a minimum to use the Citrix

Universal XPS print driver? A. Sun JVM 1.5 B. .NET Framework 2.0 C. .NET Framework 3.0 D. Windows Installer 2.0 Answer: C Section: (none) Explanation/Reference:

QUESTION 133 Scenario: There have been numerous reports recently from the Finance department indicating that print jobs to a new Xerox MFP printer are causing various

printing problems. Print jobs have been reported with errors, the tray call feature has NOT been working and duplexing and print alignment have been off. The Citrix

environment consists of 50 Citrix XenApp servers with 1000 concurrent users. Citrix policies have been configured with the following settings:Do not automatically

install native drivers Use universal driver only if requested driver is unavailable Which two steps could the administrator take to resolve this print issue? (Choose

two.) A. Install Windows native driver B. Configure trusted driver source C. Configure print driver replication D. Install Citrix Universal Print Driver Answer: AC


QUESTION 134 Scenario: An administrator replicates a print driver throughout thefarm. The administrator later discovers that this replicated print driver is causing

problems and users are unable to print to client printers. Which two of the listed steps could the administrator take to resolve this issue? (Choose two.) A. Disable

LPT port mapping. B. Use the driver mapping feature of Citrix XenApp. 54. C. Create a policy to disable native driver auto-install. D. Modify the print driver compatibility list within the XenApp Advanced Configuration tool. Answer: BD

Pge p

citrixSection: (none) Explanation/Reference:

QUESTION 135 An administrator has locked down servers using Citrix policies and disabled the ability for users to install print drivers; however, some print drivers

are still being installed.What is the first step the administrator should take to troubleshoot this issue? A. Review the resultant policy. B. Edit the Universal driver

rule. C. Disable the native print driver policy. D. Update printer and driver information. Answer: A Section: (none) Explanation/Reference:

QUESTION 136 Scenario: A company has added 20 network printers of the same modelin the Marketing department. An administrator has successfully tested the

manufacturer's driver and is ready to deploy it through the Citrix XenApp farm. The administrator has created the appropriate printing policy for the users.How can the

administrator configure these network printers for the farm with the least amount of overhead? A. Add the driver to the compatibility list. B. Manually load the driver

and map the driver to the servers. C. Allow auto-create from the users' logging in to the servers. D. Manually load the driver on one server and auto-replicate the

driver to the other servers. Answer: D Section: (none) Explanation/Reference:

QUESTION 137 An administrator is troubleshooting ICA connectivity to a Citrix XenApp server. By running a telnet 192.168.1.30 1494 command, which output should the

administrator receive if the ICA connectivity is established? A. ICAICAICA 55. B. Connected C. Results = 1 D. ICA connection successful Answer: A Section: (none) Explanation/Reference:

QUESTION 138 Scenario: Citrix XenApp has recently been implemented on Windows Server 2008. The default IIS port has been changed to port 444 The session reliability

port has been opened up on the internal firewall The Citrix XML Service on the XenApp servers has been configured on port 8080 There is a single farm with Web

Interface and Secure Gateway installed on the same server hosted on the DMZ Users report that they are NOT able to connect to their published applications through Web

Interface and are receiving an error. Refer to the exhibit above to review the current settings. Which step must the administrator take to troubleshoot this? A.

Disable session reliability B. Modify the Secure Gateway port to port 444 C. Addport 8080 behind the Secure Ticket Authority URLs 56. D. Use the IP address of Secure Gateway instead of FQDN name Answer: C Section: (none) Explanation/Reference:

QUESTION 139 Scenario: Users are having trouble with certain key combinations in a terminal application that are conflicting with Citrix hotkeys. The application is

available through the Web Interface. What should the administrator modify to disable hotkeys for all users? A. DEFAULT.ICA file B. Settings for the application C.

Group policy for the server D. Policy for the users of the application Answer: ASection: (none) Explanation/Reference:

Pge p

citrix

QUESTION 140 Scenario: An administrator is out of the office and receives a callthat a user session is hung. Unfortunately, it is NOT possible to connect to the

Citrix XenApp server using a remote console; however, the administrator has established a remote command prompt session. The user session is labeled Session1.Using

native Terminal Server tools, which command could the administrator use to free up the user session? A. quser 1 /reset B. reset session 1 C. net session 1 /reset D.

net session 1 /delete Answer: B Section: (none) Explanation/Reference:

QUESTION 141 Scenario: An administrator set up a firewall between a license server and several Citrix XenApp servers. All the default settings and ports were used. The

administrator tests this new configuration and notices that the Citrix Licensingservice is NOT running.What should the administrator do to make the Citrix Licensing

service run? 57. A. Open port 8082 on the firewall. B. Open port 27000 on the firewall. C. Configure a static port number for the Citrix vendor daemon. D. Configure the Citrix

vendor daemon to communicate using a dynamic port. Answer: C Section: (none) Explanation/Reference:

QUESTION 142 Scenario: Several new policies were recently created in a Citrix XenApp farm. A user has called stating that he cannot see client drives or printers when

connecting to the farm since the policies were implemented. What could an administrator use to determine which policies are conflicting? A. Event Viewer B. Report

Center C. Diagnostic Facility D. Policies search engine Answer: D Section: (none) Explanation/Reference:

QUESTION 143 Scenario: Users are reporting that they cannot connect to any published applications. All users are using Windows XP Professional with the most up-to-date

XenApp Plugin. The administrator verifies that although this is configured for all Citrix XenApp servers, the affected server, XA01, is NOT accessible to users. Users

can connect successfully to other Citrix XenApp servers in the farm. Which action will allow the administrator to confirm that Terminal Services on XA01 isfunctional?

A. Use the query hr XA01 command on the Windows client. B. Use the telnet command to connect to port 1494 on XA01. C. Use the mstsc command on the Windowsclient to

connect to XA01. D. Use the netstat -a command to confirm that Terminal Servicesis listening on port 1041. Answer: C Section: (none) Explanation/Reference:

QUESTION 144 58. An administrator wants to provide access to a group of help desk users to manage sessions remotely on a server.Which two options are the most secure ways of

solving this issue using the least privilege security model? (Choose two.) A. Assign only the administrative rights required within the Access Management

Pge p

citrixConsole B.

Assign only the administrative rights required within the XenApp Advanced Configuration tool C. Instruct the help desk users to install the Access Management Console

and manage sessions from their workstation. D. Instruct the help desk users to install the XenApp Advanced Configuration tool and manage sessions from their

workstation. Answer: AC Section: (none) Explanation/Reference:

QUESTION 145 A user connects to Web Interface and is presented with application icons.How does the user connect to the application after clicking on it? A. The user is

forwarded to the least busy Citrix XenApp server by the Web Interface server. B.The user is connected to the least busy Citrix XenApp server hosting the application

by contacting the Citrix XML Service. C. The user connects to the subsequent Citrix XenApp server in round-robin fashion if a load evaluator has been designated. D.

The user is connected to the least busy Citrix XenApp server hosting the application by contacting the Zone Data Collector. Answer: D Section: (none)


QUESTION 146 Which Citrix service is responsible for servicing network requests for session reliability? A. XML B. XTE C. MFCOM D. Client Network Answer: B Section:

(none) Explanation/Reference: 59. QUESTION 147 Which three supported database platforms can be used to host the Citrixd ata store? (Choose three.) A. Oracle B. Sybase C. MySQL D. Access E.IBM DB2

Answer: ADE Section: (none) Explanation/Reference:

QUESTION 148 An administrator created a new farm and the data store for that farm is being stored on a Microsoft SQL Server using the default ports.Which port number

is being used for communication between the Citrix XenApp server and data store?A. 1433 B. 1494 C. 1604 D. 5580 Answer: A Section: (none) Explanation/Reference:

QUESTION 149 Scenario: An administrator is considering the use of zone preference and failover as part of a disaster recovery plan. The current environment is based on

a single farm with 20 servers at each of three physical locations with high speed connections and no latency issues. Each physical location represents a zone in the

farm. A total of 50 servers have been designated for the disaster recovery site and configured as a new zone within the farm. Is this solution feasible and why?A. No;

two farms will be required for this configuration. B. Yes; four zones can reasonably be supported within a Citrix XenApp farm. C. No; there is a maximum of three zones

within the zone preference and failover configuration. D. Yes; this configuration meets the 50-server minimum requirement for zone preference and failover. Answer: B


Pge p

citrix60.

QUESTION 150 Scenario: At times of high usage, users in a Citrix XenApp environment are unable to complete a connection to the Citrix XenApp server. An administrator

investigates the issue and rules out a shortage of hardware resources and wants to check Citrix XenApp license usage.What can the administrator use to view the license

usage? A. Windows Server Manager B. Access Management Console C. License Management Console D. XenApp Advanced Configuration tool Answer: C Section: (none)


QUESTION 151 An administrator installed Citrix XenApp and accepted all the default settings for the Remote Desktop Users group.Which users will be added tothe Remote

Desktop Users group? A. Everyone B. The ctx_cpsvcuser C. Local administrators D.All users from the Users group Answer: D Section: (none) Explanation/Reference:

QUESTION 152 In order for an administrator to provide a user with access to resources published on a Citrix XenApp server, the user must be a member of which local

group on the server? A. Users B. Guests C. Power Users D. Remote Desktop Users Answer: D Section: (none) Explanation/Reference: 61.

QUESTION 153 Scenario: An administrator has been approached by a business unit that wishes to designate its own Citrix XenApp licenses for use on servers that will be

funded by that unit. An additional bank of 100 licenses has been purchased for those business unit users. How can the administrator ensure that only that user group

will be able to access applications hosted on those servers? A. On the existing license server, correlate that bank of licenses to that user group. B. On the existing

license server, correlate that bank of licenses to the server group. C. Allocatea distinct license server with those licenses and designate the server properties

accordingly. D. Allocate a distinct license server with those licenses and correlate that bank of licenses to that user group. Answer: C Section: (none)


QUESTION 154 What is the default TCP port used by the License Management Consolefor communication with the license server? A. 80 B. 2513 C. 8082 D. 27000 Answer: C


QUESTION 155 Scenario: An administrator added five new replacement servers for Citrix XenApp. The decommissioned Citrix XenApp servers will be repurposed to beused by

a Citrix XenApp Engineering environment for testing purposes. The administrator must isolate the production space from the Engineering space. Which step must the

Pge p

citrixadministrator take to meet the requirements of the scenario? A. Create a new farm B. Create a new zone C. Add to the existing farm D. Create a new license server

Answer: A Section: (none) 62. Explanation/Reference:

QUESTION 156 Which default TCP port is used by the license vendor daemon? A. 80 B. 2598 C. 3389 D. 7279 E. 27000 Answer: D Section: (none) Explanation/Reference:

QUESTION 157 An administrator is concerned that traffic from the Web Interface server in the DMZ and the XenApp XML server on the internal network is NOT secure.How

could the administrator encrypt traffic between the Web Interface and XML server? A. Install an SSL server certificate on the Citrix XenApp server and configure Citrix

SSL relay. B. Disable XML on all Citrix XenApp servers and configure the XML Service to listen on port 443. C. Install an SSL server certificate on the Web Interface

server and enable SSL through the IIS console. D. Disable XML on all Citrix XenApp servers and encrypt traffic between the Web Interface and XenApp XML server using

IPSec. Answer: A Section: (none) Explanation/Reference:

QUESTION 158 Scenario: An administrator wants to implement the Citrix Secure Gateway so that remote users can access their applications securely over the Web. There is

a separate Secure Gateway and Web Interface server that is in a single-hop DMZ. There are 20 Citrix XenApp servers on the internal LAN hosting three applications. The

administrator decided to use an internal Certification Authority to generate a signed certificate. In order to establish a successful client connection throughCitrix

Secure Gateway, an administrator should install __________ and __________. (Choose the two correct statements to complete the sentence.) A. a root server certificate

on a client machine B. a server certificate on a Web Interface server C. a server certificate on a Secure Gateway server D. a root server certificate on a Web

Interface server 63. Answer: AC Section: (none) Explanation/Reference:

QUESTION 159 Scenario: A recent initiative to increase availability of the Citrix XenApp infrastructure has been mandated for the Citrix environment. Thereis a

production Web Interface server named Server A. A secondary Web Interface servernamed Server B has been configured as a stand-by server in case Server A fails. A pair

of Citrix Secure Gateway servers located in the DMZ are configured for load balancing. A XenApp Services site is currently being used to make applications available

for the Citrix users from their desktops. The administrator must meet the following requirements: Provide redundancy for the current application delivery environment

Pge p

citrixMaintain the current design for application delivery What could the administrator configure with the least amount of administrative effort and minimal recovery time to

meet the requirements of the scenario? A. Load balancing for Web Interface B. Backup of the Web Interface server C. A backup URL for the XenApp Services site D. XenApp

Web site load balancing by grouping the Server A and Server B sites Answer: C Section: (none) Explanation/Reference:

QUESTION 160 To which Citrix service does Web Interface forward a user's logon credentials? A. XML B. WMI C. MFCOM D. Independent Management Architecture Answer: A


QUESTION 161 Scenario: A single Web Interface server named xenappweb1.mycompany.com is currently being leveraged to host applications for Citrix users through HTTP.

For additional redundancy and security as required by management, a second Web Interface server named xenappweb2.mycompany.com will be made available and load-balanced 64. with a hardware load balancer and SSL will be used to secure all traffic to the Web Interface servers.In order to configure the environment to meet the

requirements defined above, which three statements are valid configuration steps? (Choose three.) A. Install a separate SSL certificate on each server thatmatches the

FQDN of each server. B. Install a root certificate on each Web Interface server that matches the certificate on the load balancer. C. Create a new DNS entry for

xenapp.mycompany.com and assign it the IP address of the VIP on the hardware load balancer. D. Create a new CNAME alias in DNS for xenapp.mycompany.com and add both

Web Interface server names to the record for load balancing. E. Create a new load balancing group on the load balancer that contains the Web Interface sites from each

Web Interface server that are to be load balanced. Answer: BCE Section: (none) Explanation/Reference:

QUESTION 162 Identify the traffic involved in the communication between the client, Web Interface server and Citrix XenApp in the attached diagram. Click the Help

button for instructions on how to complete a Drag and Drop item. 65. A. Answer: Answer: Section: (none) Explanation/Reference:

Pge p

Documents

citrix - Bloc-notes