Cisco 200-001 Exam Questions & Answers · 2014-03-07 · C. provisioning a Cisco TelePresence System endpoint D. tracing SIP and H.323 calls E. managing phonebooks for endpoints that

Cisco 200-001 Exam Questions & Answers

Number: 200-001Passing Score: 800Time Limit: 120 minFile Version: 25.5

http://www.gratisexam.com/

Cisco 200-001 Exam Questions & Answers

Exam Name: Implementing Cisco Video Network Devices (VIVND)

Exam A

QUESTION 1Which scheduling and management application can be installed on any hardware platform that meets theminimum specifications that the end customer decides to deploy?

A. Cisco Video CommunicationsB. Cisco TelePresence Management SuiteC. Cisco Digital Media ManagerD. Cisco TelePresence Management SwitchE. Cisco Unified Communications Manager

Correct Answer: BSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 2When scheduling a multipoint conference, which three devices are required for the conference to bescheduled and completed successfully? (Choose three.)

A. Cisco Unified Communications ManagerB. multipoint control unitC. video conferencing endpointsD. Cisco Unity ConnectionE. Cisco Unified IM and Presence

Correct Answer: ABCSection: (none)Explanation


QUESTION 3Which encoder is best suited for professional, studio-quality audio and video processing?

A. Scientific Atlanta EncoderB. Cisco Digital Media Encoder 1000C. Cisco Digital Media Encoder 2000D. Cisco Digital Media Encoder 3000

Correct Answer: CSection: (none)Explanation


QUESTION 4Cisco Video Surveillance Video Encoder cards perform which function?


A. the ability to use existing analog equipment with an IP-enabled video surveillance systemB. the ability to convert low-resolution video to high-definition video for video surveillanceC. the ability to stream digital media to digital media in an IP-enabled video recording environmentD. the ability to encrypt raw video signals to secure video signals

Correct Answer: ASection: (none)Explanation


QUESTION 5In an ISR Cisco Video Management and Storage System, what is the maximum storage capacity allowedper module?

A. 1 TB per moduleB. 2 TB per moduleC. 3 TB per moduleD. 500 MB per moduleE. 750 MB per moduleF. 850 MB per module



QUESTION 6Which two issues does utilizing an IP network storage solution for IP video surveillance help overcome?(Choose two.)

A. analog to IP conversionB. large, expandable storage spaceC. physical securityD. scalabilityE. faster bit rate for storage

Correct Answer: BDSection: (none)Explanation


QUESTION 7Which of these involves combining visual elements from separate sources into a single image?

A. interlacingB. compositingC. video conferencingD. interleaving



QUESTION 8Which well-known port is used to access the Cisco IP Video Surveillance Operations Manager via a secure,ActiveX web session?

A. 20B. 80C. 421D. 434E. 443F. 8080

Correct Answer: ESection: (none)Explanation


QUESTION 9Which two of these are considered to be provisioning and scheduling management tools in a CiscoTelePresence environment? (Choose two.)

A. Cisco TelePresence ManagerB. Cisco Video Surveillance Operations ManagerC. Cisco TelePresence Management SuiteD. Cisco TelePresence Multipoint Control UnitE. Cisco Video Surveillance Management Server

Correct Answer: ACSection: (none)Explanation


QUESTION 10Which of these needs to be enabled in Cisco Unified Communications Manager in order for the CiscoTelePresence System 500-32 to be able to share a presentation with a Cisco TelePresence System CodecC40 endpoint that is registered to a VCS?

A. allow iX application mediaB. send send-receive SDP in mid-call inviteC. allow presentation sharing using BFCPD. allow presentation sharing using H.235E. deliver conference bridge identifier

Correct Answer: C

Section: (none)Explanation


QUESTION 11When placing a call from Cisco Jabber Video for TelePresence to the Cisco TelePresence System CodecC40, which FECCs are available?

A. Only zoom-in and zoom-out are available.B. Only left and right are available.C. Only up and down are available.D. No FECC is available.E. Left, right, up, down, zoom-in, and zoom-out are all available.



QUESTION 12Which statement is correct regarding the difference between Multisite and Multiway conferencing?

A. Multisite requires configuration on the endpoint, whereas Multiway requires the Multiway options key tobe installed.

B. Multisite requires the presence of a multipoint control unit, whereas Multiway relies on the endpointconferencing capability.

C. Multisite is used to conference in multiple sites, whereas Multiway is intrasite multipoint conferencing.D. Multisite requires the Multisite options key to be installed and configured at the endpoint, whereas

Multiway requires a Cisco TelePresence Video Communications Server and a centralized multipointcontrol unit.

Correct Answer: DSection: (none)Explanation


QUESTION 13Which of these devices require configuration in order for an endpoint to initiate a Multiway conference?

A. endpoint onlyB. Cisco TelePresence Video Communications Server onlyC. multipoint control unit onlyD. endpoint and multipoint control unit onlyE. endpoint and Cisco TelePresence Video Communications Server onlyF. endpoint, Cisco TelePresence Video Communications Server, and multipoint control unit

Correct Answer: FSection: (none)Explanation


QUESTION 14

Refer to the exhibit.

You have just finished installing a 65-inch dual profile system in a multipurpose room. After powering up theentire system, only one display is used. Using the information in the exhibit, why is the second display notdisplaying anything from the system?

A. The Cisco TelePresence profile systems do not support dual display.B. The display is not powered on.C. The dual display option key has not been input into the codec.D. The codec has the appropriate option keys installed, so either the display is not cabled correctly, the

codec is configured incorrectly, or there is no input being sent to the display.



QUESTION 15Threat monitoring in physical access security can be based upon which three of these? (Choose three.)

A. doorsB. badgesC. ageD. weatherE. heightF. fingerprints

Correct Answer: ABFSection: (none)Explanation


QUESTION 16During the initial setup of the Cisco TelePresence System 500, you are required to do an initial camerasetup that fails. What might be a primary reason that the failure occurs?

A. The camera cannot focus on the target.B. The room is too dark.C. The system is too far away from the target.D. The cable to the camera is not connected correctly.



QUESTION 17Which statement is true about the Cisco TelePresence System 500-32 system regarding the HVAC needsfor the room where it is installed?

A. The system does not require any additional requirements above the normal HVAC requirements for theroom.

B. You must supply additional cooling requirements for the room.C. You must supply a room that has energy-efficient lighting to reduce the temperature of the room.D. The temperature of the room will be 10 to 20 degrees warmer than the rest of the building.



QUESTION 18What is the optimum distance for a person sitting using the Cisco TelePresence System 500?

A. the camera can adjust automaticallyB. 0.5 meters and 0.75 meters (1.5 and 2.5 feet)C. 1.2 meters and 1.8 meters (4 and 6 feet)D. 3.0 and 5.0 meters (10 and 15 feet)



QUESTION 19Which two additional items must be configured for an endpoint to register manually with the CiscoTelePresence Video Communication Server for the SIP to function correctly? (Choose two.)

A. E.164 aliasB. H.323 IDC. SIP uniform resource indicatorD. configured SIP registrar and proxy server

E. NTP server IPv4 addressF. unique system ID

Correct Answer: CDSection: (none)Explanation


QUESTION 20Refer to the exhibit.

Which SIP URI should be dialed in order to reach the endpoint that is registered with the IP address of172.29.1.221 from another endpoint with a URI of sip:[email protected]?

A. 52900121B. sip:[email protected]. [email protected]. 172.29.1.221E. ex90




Which two strings that could be dialed to start a multipoint conference that is hosted by the multipointcontrol unit? (Choose two.)

A. 52900121B. [email protected]. [email protected]. 5919E. ex90F. [email protected]

Correct Answer: DFSection: (none)Explanation



You must dial the interactive response system of the multipoint control unit. What are the appropriate dual-tone multi-frequency digits to create an ad-hoc conference with an identifier of 2345?

A. 2345

B. 2345#C. 5919*2345D. 5919*2345#



QUESTION 23When you register the Cisco TelePresence System 500-32 video system with the Cisco UnifiedCommunications Manager, what is the most important item for the registration to be input into the server?

A. the IPv4 address of the Cisco TelePresence System 500-32B. the IP telephone media access control address that is used to manage the systemC. the media access control address of the Ethernet port of the Cisco TelePresence System 500-32D. The Cisco TelePresence System 500-32 will always automatically register with the Cisco Unified

Communications Manager server.




What can be deduced from the log shown in the exhibit, which was taken from a Cisco TelePresenceCodec C60?

A. A direct call to 52902511 is being made.B. A Multiway call to [email protected] is being made.C. No calls are being attempted by the endpoint.D. A BFCP call is being initiated.E. The endpoint is receiving a call from the VCS.




Under which tab can the registration status for the endpoint be found?

A. DiagnosticsB. ConfigurationC. Call ControlD. Maintenance




Exam B

QUESTION 1While performing a password recovery on a Cisco TelePresence endpoint, what is the maximum amount oftime for input to be received by the device before the system exits the password recovery mode?

A. 15 secondsB. 20 secondsC. 30 secondsD. 40 secondsE. 60 seconds



QUESTION 2Which two of these are required in order to complete the password recovery of a Cisco TelePresenceSystem endpoint? (Choose two.)

A. must have FTP enabled on the endpointB. must have SSH enabled on the endpointC. must have the security question answer for the endpointD. must be in the same room as the main displayE. must have SFTP enabled on the endpointF. must call Cisco TAC for the security code



QUESTION 3Which three of these are functions of the Cisco TelePresence Management Suite? (Choose three.)

A. automatic software update and release keysB. intelligent call routing engineC. provisioning a Cisco TelePresence System endpointD. tracing SIP and H.323 callsE. managing phonebooks for endpoints that are registered to the Cisco Unified Cisco Unified

Communications ManagerF. rebooting endpoints that are registered to the Cisco TelePresence Video Communications Server

Correct Answer: ABFSection: (none)Explanation



When the administrator clicks the ticket number of any of the open tickets, which two actions are presentedto the administrator? (Choose two.)

A. ignore ticketB. acknowledge ticketC. delete ticketD. close ticketE. escalate ticket

Correct Answer: ABSection: (none)Explanation


QUESTION 5Refer to the exhibit:

Which system tab can be used to add video infrastructure devices and endpoints?

A. NavigatorB. System OverviewC. Configuration TemplatesD. ProvisioningE. Administrative Tools




QUESTION 6Which CLI command can be used to reset the Cisco TelePresence System 500-32 personal video systemto a factory condition?

A. utils factory reset 2B. utils system factory initC. xcommand defaultvalues set level: 2D. xconfiguration default factoryE. utils reset factoryF. xcommand SystemUnit FactoryReset



QUESTION 7Refer to Exhibit:

Which two of these can cause the phone status error icon that is shown in the exhibit? (Choose two.)

A. The Cisco Unified Communications Manager IM and Presence Service is not available.B. The username and password in Cisco Jabber phone services are misconfigured.C. The Cisco Jabber initial audio and video settings need to be set.D. There is no DN configured for the Cisco Unified Client Services Framework in Cisco Unified

Communications Manager.E. The Cisco Jabber does not have the correct phone button template and hence cannot register to the

Cisco Unified Communications Manager.F. The called user presence status is unknown.



QUESTION 8What is the main difference between Cisco Jabber and Cisco Jabber Video for TelePresence?

A. Cisco Jabber registers to the Cisco Unified Communications Manager, whereas Cisco Jabber Video forTelePresence registers to the VCS.

B. Cisco Jabber Video for TelePresence registers to Cisco Unified Communications Manager, whereasCisco Jabber registers to the VCS.

C. Cisco Jabber has no video calling capabilities, whereas Cisco Jabber Video for TelePresence has videocapabilities.

D. Cisco Jabber has no presence capabilities, whereas Cisco Jabber Video for TelePresence haspresence capabilities.

E. There is no difference between Cisco Jabber and Cisco Jabber Video for TelePresence. They shouldnot coexist in the same network.



QUESTION 9Which two layout or switching modes are supported with the Cisco TelePresence Multipoint Switch?(Choose two.)

A. enhanced continuous presenceB. active speaker switchingC. continuous presenceD. speaker switchingE. room switchingF. active continuous presence

Correct Answer: DESection: (none)Explanation


QUESTION 10Which Cisco TelePresence Multipoint Control Unit Layout view mode gives prominence to one conferenceparticipant over the other conference participants while still allowing conference participants to view multipleparticipants at the same time?

A. enhanced continuous presenceB. active speakerC. continuous presenceD. room switchingE. speaker switching



QUESTION 11Which two systems would be an appropriate solution for a traveling employee? (Choose two.)

A. Cisco JabberB. Cisco C-Series codecC. Cisco TelePresence EX SeriesD. Cisco Jabber Video for TelePresenceE. Cisco TelePresence System 500F. Cisco IP Video Phone E20

Correct Answer: ADSection: (none)Explanation


QUESTION 12What are the best practices for maintaining a high-quality video call regarding latency, jitter, and packetloss?

A. 20-ms one-way delay, no jitter, no packet lossB. less than 150-ms one-way delay, 30-ms jitter, less than 3 percent packet lossC. 150- to 400-ms one-way delay, 50-ms jitter, 5 percent packet lossD. 500-ms one-way delay, 50-ms jitter, 5 percent packet loss



QUESTION 13Which two of these support an ad-hoc conference call? (Choose two.)

A. Cisco TelePresence Multiway with Cisco TelePresence Multipoint Control Unit and Cisco TelePresenceVideo Communications Server

B. using the Cisco TelePresence Management Suite Scheduler to schedule a conference call to start in 5minutes

C. using the Booking tab in the Cisco TelePresence Management Suite to configure a new conferenceD. using the tab Administrative Tools > Configuration > Conference Settings in the Cisco TelePresence

Management SuiteE. pressing the conference button on a Cisco Unified IP Phone 8941 to conference in a third call

Correct Answer: AESection: (none)Explanation



Which configuration element can be used to specify the Multiway address that can be used by the endpointto initiate Multiway calls?

A. Conference 1B. NetworkServicesC. ProvisioningD. SIP Profile 1E. Video


Explanation/Reference:

Explanation:

QUESTION 15You have been informed from the field that a new Cisco TelePresence video endpoint has been deployedwith an IPv4 address of 172.28.254.45. Which three devices could you use to see if the endpoint isregistered and available for a call? (Choose three.)

A. Cisco Unified Communications Manager serverB. Cisco Gigaswitch RouterC. Cisco TelePresence Manager Suite serverD. Active Directory serverE. Cisco TelePresence Video Communication ServerF. Cisco 3250 Layer 2/3 Switch

Correct Answer: ACESection: (none)Explanation


QUESTION 16Cisco TelePresence Video Communication Servers can be clustered to provide resiliency in the enterprise.What is the maximum number of cluster members?

A. 2B. 3C. 6D. 7E. 15



QUESTION 17Which Cisco TelePresence endpoint uses only Cisco Unified Communications Manager as its call controldevice?

A. SX20B. Cisco TelePresence System 500-32C. EX90D. C60E. Video Communication Server



QUESTION 18When manual discovery is used to register a Cisco TelePresence endpoint to a VCS via SIP, which twopieces of information are required to be configured on the endpoint for registration to occur, assuming thatCisco TMS and DNS are not being used? (Choose two.)

A. option 150B. SIP URIC. proxy addressD. H.323 aliasE. external manager addressF. RTP ports

Correct Answer: BCSection: (none)Explanation


QUESTION 19Which three of these are valid ways to initially configure a C-Series codec in a network where DHCP is notused? (Choose three.)

A. Tandberg Remote Control VB. secure copy programC. CLI using a console cableD. touchscreen interfaceE. secure web browserF. Telnet

Correct Answer: ACDSection: (none)Explanation


QUESTION 20A user wants to use the One Button to Push feature on a Cisco TelePresence System 500-32 videoendpoint. Which configuration tool should be used to allow the One Button to Push feature to work?

A. Cisco Unified Communications Manager server, phones, devices, One Button to PushB. Cisco Gigaswitch Router, Call Manager Express, One Button to PushC. Cisco TelePresence Manager Suite server, new conference, set Conference type to One Button to PushD. Active Directory server, users, new conference, One Button to PushE. Cisco TelePresence Video Communication Server, new conference, calls, One Button to Push



QUESTION 21Which configuration is needed in order for Cisco Jabber Video for TelePresence to initiate Multiway calls?

A. Configure the Multiway address under Video Settings in the Cisco Jabber Video for TelePresence client.B. Configure the Mutliway URI address under TelePresence Management Suite > Systems > Provisioning

> Users > Configuration Template.C. Configure the Mutliway URI address under Cisco TelePresence Video Communications Server >

Applications > Cisco Jabber Video for TelePresence.D. The Cisco Jabber Video for TelePresence only supports Multisite calls, which is enabled by default.




When the Cisco Jabber Video for TelePresence fails to register with the server, which two fields should beconfigured at a minimum, assuming SRV records are not configured? (Choose two.)

A. the internal or external DNS server name for the Cisco TelePresence Video Communications ServerB. the internal DNS server name for the Cisco TelePresence Management SuiteC. the SIP domainD. the IP address of the Cisco TelePresence Management Suite for the internal serverE. the IP address of the Cisco Unified Communications Manager for the internal server



QUESTION 23

Refer to the Exhibits, in order to create a scheduled or ad-hoc multipoint conference, which two tolls can beused? (Choose two)

A. Exhibit AB. Exhibit BC. Exhibit CD. Exhibit D

E. Exhibit E


Explanation/Reference:Explanation: CUCM and VCS can be used.

QUESTION 24

Refer to the exhibits.

An administrator needs to perform a factory reset on a C-Series endpoint. What are two valid ways toaccomplish this task? (Choose two.)

A. Exhibit AB. Exhibit BC. Exhibit CD. Exhibit DE. Exhibit E

Correct Answer: ADSection: (none)Explanation

Explanation/Reference:Explanation: on system unit CLI use the "Xcommand SystemUnit FacotryReset" or in the codec GUI usethe Factory Reset feature in the Maintenance tab.

QUESTION 25

The C-Series endpoint (codec) does not register with the Video Communication Server that is located in adifferent network. Based on the exhibits, what could be causing the issue?

A. The subnet mask on the codec is incorrect.B. The ip address of the codec is incorrect.C. The interface that the codec is in is in the wrong VLAN.D. The codec did not receive a DHCP address from the DHCP server.

Correct Answer: ASection: (none)

Explanation


QUESTION 26

The Cisco Telepresence Codec C90 is unable to call the Cisco IP Video Phone. Assuming that the callingsearch space has been configured correctly, which of the these can cause this issue?

A. The Cisco Telepresence Codec C90 can only be registered to a Cisco Telepresence VideoCommunication Server.

B. A multipoint control unit is required in order for the call to work.C. The Cisco Telepresence Codec C90 can only be registered as a SIP endpoint to Cisco Unified

Communications Manager. H.323 is not supported.D. URI dialing has not been configured on Cisco Unified Communications Manager.E. The Cisco Telepresence Codec C90 Profile 1 > CallSetupMode must be configured as a gateway since

Cisco Unified Communications Manager does not have a gatekeeper functionality.F. The Cisco Telepresence Codec C90 is not registered as a SIP endpoint on Cisco Unified

Communications Manager. The Cisco Telepresence Codec C90 needs to be registered as both SIP andH.323.




Documents

Cisco 200-001 Exam Questions & Answers · 2014-03-07 · C. provisioning a Cisco TelePresence System endpoint D. tracing SIP and H.323 calls E. managing phonebooks for endpoints that