4
For additional information, Please contact us at (66) 2642-6644 or at www.diversey.com MKT - PIS V1 10/10 Material Safety Data Sheet According to 91/155 EC page 1/4 1 Product and company identification 3 Hazards identification 2 Composition / Information on ingredients 4 First aid measures In case of unconsciousness bring patient into stable side position for transport.. Wash thoroughly with water. Remove contaminated clothing. Obtain medical attention if symptoms develop. Immediately flush eyes with running waterat least 15 minutes. Get medical attention. Remove material from mouth.Drink 1-2 glasses of water (or milk). Get medical attention immediately and show the container label. General information : Inhalation Skin contact Eye contact Ingestion: Reviewed on : 07/04/2010 Supersede Date : 07/04/2010 Brandname : Application of the product : Manufacturer/Supplier : Information department : Emergency information : Hard water, defoamed reclaim CIP&Soaking Detergent Diversey Hygiene (Thailand) Co.,Ltd. Diversey Hygiene (Thailand) Co.,Ltd. Poison Centre, Ramathibodi hospital Tel. 0-2354-7272, 0-2201-1083 Hot line : 1367 AN Code : VC11 Cipton Reference number : R-DLT180359 Chemical characterisation Description : Foam cleaner Mixture in water of non-dangerous ingredients and the substances listed below. Classification: C Corrosive Hazards of man and the environment : R35 Cause severe burns. Classification system The classification complies with current EC regulations on dangerous substances and preparations. Hazardous ingredients : Sodium hydroxide Tetrasodium ethylenediaminetetraacetate 15-30% 5-15% 1310-73-2 64-02-8 Ingredients according to EC 89/542/EEC C; R 35 Xn; R 22-36 EDTA, phosphonates, non+ionic surfactants, anionic Surfactants, nitrilotriacetic acid <5% Additional information : The full text of the relevant risk phrases is given in section 16.

Cipton MSDS Eng

Embed Size (px)

Citation preview

Page 1: Cipton MSDS Eng

For additional information, Please contact us at (66) 2642-6644 or at www.diversey.com MKT - PIS V1 10/10

Material Safety Data SheetAccording to 91/155 EC page 1/4

1 Product and company identification

3 Hazards identification

2 Composition / Information on ingredients

4 First aid measures

In case of unconsciousness bring patient into stable side position for transport..

Wash thoroughly with water. Remove contaminated clothing. Obtain medical attention if symptoms

develop.

Immediately flush eyes with running waterat least 15 minutes. Get medical attention.

Remove material from mouth.Drink 1-2 glasses of water (or milk). Get medical attention immediately

and show the container label.

General information :

Inhalation

Skin contact

Eye contact

Ingestion:

Reviewed on : 07/04/2010 Supersede Date : 07/04/2010

Brandname :

Application of the product :

Manufacturer/Supplier :Information department : Emergency information :

Hard water, defoamed reclaim CIP&Soaking DetergentDiversey Hygiene (Thailand) Co.,Ltd.Diversey Hygiene (Thailand) Co.,Ltd. Poison Centre, Ramathibodi hospital Tel. 0-2354-7272, 0-2201-1083Hot line : 1367

AN Code : VC11Cipton

Reference number : R-DLT180359

Chemical characterisation Description : Foam cleanerMixture in water of non-dangerous ingredients and the substances listed below.

Classification: C Corrosive

Hazards of man and the environment : R35 Cause severe burns.

Classification system

The classification complies with current EC regulations on dangerous substances and preparations.

Hazardous ingredients :

Sodium hydroxide

Tetrasodium ethylenediaminetetraacetate

15-30%

5-15%

1310-73-2

64-02-8

Ingredients according to EC 89/542/EEC

C; R 35

Xn; R 22-36

EDTA, phosphonates, non+ionic surfactants, anionicSurfactants, nitrilotriacetic acid <5%

Additional information : The full text of the relevant risk phrases is given in section 16.

Page 2: Cipton MSDS Eng

For additional information, Please contact us at (66) 2642-6644 or at www.diversey.com MKT - PIS V1 10/10

Material Safety Data SheetAccording to 91/155 EC

page 2/4

5 Fire fighting measures

6 Accidental release measures

8 Exposure controls and personal protection

7 Handling and storage

Protection of personnel :

Environmental precautions :

Method of disposal :

Wear suitable protective clothing, gloves and eyes/face protection (see Section 8.)

Dilute with plenty of water.

Use neutralizing agent.

Absorb onto dry sand or similar inert material.

Dispose of the collected material according to the regulations.

Handling (see also sections 8 and 15)

Information for safe handling :

Information about protection against explosions and fires :

Storage

Requirements for storage rooms and containers :

Storage in one common storage facility :

Further information about storage conditions:

Additional information about design of technical systems : No further data; see section 7.

Components with limit values that require monitoring at the workplace :

Additional information : The lists that were valid during the compilation were used as basis.

General protective and hygienic measures

Breathing equipment :

Protection of hands :

Eye protection :

Keep away from foodstuffs ,beverages and food

Take of immediately all contaminated clothing.

Wash hands during breaks and at the end of the work

Avoid contact with the eyes.

No special requirements under normal use conditions.

Chemical resistant protective gloves made of butyl or nitrile rubber

(EN374, category III).In consulation with the supplier of protective gloves

a different type of similar quality may be chosen.

Tightly fitting safety glasses

Brandname : Cipton

Suitable extinguishing media

Protective equipment :

CO2, extinguishing powder or water jet. Fight larger fires with jet or alcohol resistant

foam.

No special measure required.

No special measures required.

Store in the original,closed containers under dry conditions.

Avoid extremes of temperature.

According to local legislation

None

1310-73-2 sodium hydroxide (15-30%) OEL (Great Brittain) :Short-term value :2 mg/m3

Avoid contact with eyes, skin and clothing. Do not taste or swallow. Avoid breathing vapors or spray mists. Wash thoroughly

after handling. Add product to water (not vice versa)when preparing solution. For INDUSTRIAL USE ONLY.

Page 3: Cipton MSDS Eng

For additional information, Please contact us at (66) 2642-6644 or at www.diversey.com MKT - PIS V1 10/10

Material Safety Data SheetAccording to 91/155 EC

page 3/4Brandname : Cipton

12 Ecological information

General notes:Do not allow undiluted product to reach ground water ,surface water or sewage system. When used for its intended

11 Toxicological information

10 Stability and reactivity

Thermal decomposition/conditions to be avoided :Dangerous reactions : Hazardous composition products :

No decomposition if used according to specifications.Reacts with acid.No dangerous decomposition products known.

Acute toxicity:LD50 (oral) :Primary irritant effect:on the skin;on the eye:Inhalation:Ingestion:

Based on the toxicological classification the LD50 is to be 200-2000 mg/kg.

Cause severe burns.Cause severe or permanent damage.Severe irritant, may cause pulmonary oedemaCause severe burns.Ingestion will lead to a strong caustic effect on mouth and throat and to the danger of perforation of esophagus and stomach.

9 Physical and chemical properties

Form :

Colour :

Odour :

Change in condition

Melting point/Melting range :

Boiling point/Boiling range :

Flash point :

Spontaneous combustion :

Danger of explosion :

Density at 25oC:

Solubility in/Miscibility with

Water:

pH-value 1% w/w:

Liquid

Cloudy pale brown

Characteristic

Not determined

Not determined

Not determined

Product is not self igniting

Product is not explosive

129 g/cc approx

Miscible

>12.5 approx

13 Disposal considerations

Product:Recommendation:

Uncleaned packagings:Recommendation:Recommendation cleaning agent

Must not be disposed of together with domestic waste. Do not allow undiluted product to reach sewage system.

Dispose of observing official regulations.Water, if necessary with cleaning agent

Page 4: Cipton MSDS Eng

Material Safety Data SheetAccording to 91/155 EC

page 4/4Brandname : Cipton

For additional information, Please contact us atDiversey Hygiene (Thailand) Co.,Ltd. Tel: (66) 2642-6644 or at www.diversey.com108 Bangkok Thai Tower 15th Floor, Rangnam Road, Thanonphayathai, Ratchathewi, Bangkok 10400

16 Other information

The information in this document is based on our best present knowledge. However, it does not constitute a guarantee for

any specific product features and does not establish a legally binding contract.

15 Regulatory information

Department issuing material safety data sheet:

Contact :

Formulation code :

Clearance code :

Diversey Hygiene (Thailand) Co.,Ltd.

Diversey Hygiene (Thailand) Co.Ltd.

108 Bangkok Thai Tower 15th Floor, Rangnam Road, Thangonphayathai,

Ratchathewi, Bangkok 10400

Tel. +66 2642 6644

JDT80359-T1

R59457

14 Transport information

Land transport ADR/RID (cross-border)

ADR/RID-GGVS/E Class:

Item number / Sub-group

UN-Number:

Packaging group

Label:

Proper Shipping name

Comments:

8 Corrosive substances

-

1824

II

8

1824 Sodium Hydroxide Solution.

Transport regulations include special provisions for certain classes of dangerous goods

packed in limited quantities.

Risk phrases:

Safety phrases:

R35 Cause severe burns

S26 In case of contact with eyes,rinse immediately with plenty of water and seek medical advice.

S28 After contact with skin,wash immediately with plenty of water

S36/37/39 Wear suitable protective clothing,gloves and eye/face protection.

S45 In case of accident or if you feel unwell, seek medical advice immediately (show the label

where possible).

Classification according to EC guidelines:

The product has been classified and labelled in accordance with current EC Directives.