Chrome Catalog

••

$5.00

PHONE 715.247.2184 | FAX 715.247.5007 | [email protected]

+

+

The Perfect Storm Performance Kits pg 234-235

Hi-Five Mach 2 Air Cleaner

pg 217

Crusher Mufflers pg 232

TTS MasterTune pg 231

- 2

- 25

- 35Panacea Taillight System ..........pg 36L.E.D. Conversions ...................pg 38Modules & Load Equalizers ......pg 39H.I.D. Lighting ..........................pg 40Headlamps ............................... pg 41Driving Lights ...........................pg 42Silver Bullet Turn Signals ........ pg 46Light Mounts ........................... pg 49Taillights & Turn Signals ..........pg 50Bulbs ....................................... pg 54Accent Lighting.........................pg 56

- 59Grips .......................................pg 60Grip Accessories ......................pg 64Throttle Assists ........................pg 66Gauges .................................... pg 67Handlebar Accessories ............. pg 69Levers ......................................pg 72Control Covers ......................... pg 74Mirrors ..................................... pg 76Handlebars ...............................pg 80

- 81Footpegs ..................................pg 83Mounts & Extensions ................ pg 91Floorboards .............................pg 92Highway/Cruise Pegs & Mounts ... pg 95Clamps & Mounts .....................pg 97Engine Guards ........................ pg 102Passenger Comfort ................ pg 103

See your Local DealershipFind Your Dealership at:

www.kuryakyn.comor call us at: 715-247-2184

- 107Shift Linkages ........................ pg 108Shift Levers ............................ pg 113Brake Pedals .......................... pg 114Forward Controls ................... pg 115

- 117Tank & Dash ........................... pg 118Front End ............................... pg 124Engine ................................... pg 138Rear End ................................ pg 154License Plates ....................... pg 165

- 171Luggage ................................. pg 172Air Management .................... pg 185Passenger Comfort ................ pg 192Backrests & Racks ................. pg 195Trailer Hitch ........................... pg 200Touring Accessories ............... pg 201

- 205Chocks, Stands & Tie Downs .. pg 206General Accessories .............. pg 209Bike Care ............................... pg 211

- 213Air Cleaners ........................... pg 214Wild Things ............................ pg 225Exhaust Systems ................... pg 232Performance Kits .................. pg 234

- 236

Our Sales Support/Customer Care staff is the best in the business. Help with selecting the right part, checking on orders, returns, problem resolution, & general product information is just a phone call away. World class support for world class product is yours at 1-866-277-9598.

Our professional technical staff is your source for the right answers. They’re expert troubleshooters & have vast experience installing our products the way they were designed to fit & work. When the going gets tough, the tough call our Tech Department at 1-866-277-9598. We’ll have you back on the road in no time!

Ultra Classic

Street Glide

Road Glide

Road King

Heritage

Deluxe

Sportster

Dyna

CHRO

ME

ENGI

NE

ACCE

NTS

TIM

ING

CO

VER

FRAM

E CO

VER

SWIN

GARM

AC

CEN

TS

STAR

TER

COVE

R

WIL

D TH

INGS

®

PERF

ORM

ANCE

AXL

E CA

PS

MAS

TER

CY

LIN

DER

COVE

RS

TRAN

SMIS

SION

SH

ROUD

S

HIG

HW

AY P

EGS

CUST

OM T

IE

DOW

N B

RAC

KETS

PERF

ORM

ANCE

AIR

CL

EAN

ERS

LOW

ER L

EG

DEFL

ECTO

R SH

IELD

(N

OT S

HOW

N)

FAIR

ING

ACCE

NTS

MIR

RORS

GRIP

S

LEVE

RS

FRAM

E CO

VERS

PASS

ENGE

R

GRAB

RAI

LS

PASS

ENGE

R

DRIN

K H

OLDE

R

PASS

ENGE

R

ARM

REST

(NOT

SH

OWN

)

SADD

LE S

HIE

LD

HEA

T SH

IELD

S

TOUR

-PAK

AC

CEN

TS

LUGG

AGE

RAC

K

FOR

TOUR

-PA

K

PAN

ACEA

TA

ILLI

GHTS

& R

EAR

TURN

SIG

NAL

S

SADD

LEBA

G LA

TCH

ES

TRAI

LER

HIT

CH

CRUS

HER

EX

HAU

ST

L.E.

D. L

OWER

SA

DDLE

BAG

ACCE

NTS

ADJU

STAB

LE

PASS

ENGE

R

PEGS

& B

OARD

COV

ERS

Refe

r to

prod

uct l

istin

gs in

ca

talo

g fo

r spe

cific

fitm

ent

info

rmat

ion

C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4

INN

ER P

RIM

ARY

&

CYLI

NDE

R BA

SE C

OVER

S

FEN

DER

SK

IRT

ACCE

NT

(NOT

SH

OWN

)

ADJU

STAB

LE

PASS

ENGE

R PE

GSL.

E.D.

TAI

LLIG

HT

TURN

SIG

NAL

CO

NVE

RSIO

NSTA

ILLI

GHT

COVE

RS

SADD

LEBA

G LI

D

ACCE

NTS

& T

RIM

S

LICE

NSE

PLA

TE

FRAM

ES &

MOU

NTS

WIN

DSH

IELD

&

WIN

DSH

IELD

TRI

MS

HID

& H

ALOG

EN

HEA

DLAM

PS

NEC

K CO

VERS

SPEA

KER

GRIL

LS

(FRO

NT

& R

EAR)

QUIC

K AD

JUST

TO

UR-P

AK R

ELOC

ATOR

LID

ORGA

NIZ

ER B

AG

FOR

TOUR

-PAK

DASH

TRI

M

MID

-FR

AME

CO

VERS

HOR

N C

OVER

S

GPS

HOL

DER

DRIN

K &

GAD

GET

HOL

DERS

(NOT

SH

OWN

)

FEN

DER

TIP

LEN

S GR

ILL

FLOO

RBOA

RDS

&

COVE

RS

TOUR

-TEC

H H

IGH

WAY

PEG

SSPAR

K PL

UG &

H

EAD

BOLT

COV

ER

DRIV

ING

LIGH

TS

SHIF

T LI

NK

AGES

&

COV

ERS

Refe

r to

prod

uct l

istin

gs in

ca

talo

g fo

r spe

cific

fitm

ent

info

rmat

ion

W W W . K U R Y A K Y N . C O M

BI

KE

M

AP

S

SADD

LE S

HIE

LD

HEA

T SH

IELD

S

PERF

ORM

ANCE

AIR

CL

EAN

ERS

PAN

ACEA

TA

ILLI

GHTS

& R

EAR

TURN

SIG

NAL

S

MIR

RORS

GRIP

S

LEVE

RS

BACK

REST

S(N

OT S

HOW

N)

LICE

NSE

PLA

TE

MOU

NTS

& F

RAM

ES

SADD

LEBA

G AC

CEN

TS

AXL

E CA

PS CH

ROM

E FR

ONT

&

REAR

FEN

DER

ACCE

NTS

TR

ANSM

ISSI

ON

SHRO

UDS

W

ILD

THIN

GS®

PERF

ORM

ANCE

EN

GIN

E PR

ODUC

TS

HIG

HW

AY P

EGS

TIM

ING

COVE

RS

TAPP

ET B

LOCK

CO

VER

& A

CCEN

T

THRO

TTLE

SE

RVO

MOT

OR

COVE

R SW

ING

ARM

CO

VER

STAR

TER

COVE

R

WIN

DSH

IELD

S &

W

INDS

HIE

LD T

RIM

S

H.I.

D. &

HAL

OGEN

H

EADL

AMPS

FORK

COV

ERS

LOW

ER T

REE

DEFL

ECTO

R

PASS

ENGE

R

BOAR

DS &

COV

ERS

TAIL

LIGH

T CO

VERS

Refe

r to

prod

uct l

istin

gs in

ca

talo

g fo

r spe

cific

fitm

ent

info

rmat

ion


SWIT

CH H

OUSI

NG

&

CON

TROL

COV

ERS

L.E.

D. T

AILL

IGH

TS

& T

URN

SIG

NAL

CO

NVE

RSIO

NS

ADJU

STAB

LE

PASS

ENGE

R PE

G

INN

ER F

AIRI

NG

ACCE

NTS

& T

RIM

S

WIN

DSH

IELD

BAG

S(N

OT S

HOW

N)

DRIN

K, C

ELL

PHON

E,

GPS

HOL

DERS

(NOT

SH

OWN

)

DRIV

ING

LIGH

TS

NEC

K CO

VERS

FAIR

ING

ACCE

NTS

FUEL

DOO

R AC

CESS

ORY

MOU

NT

& L

ATCH

WIN

DSH

IELD

TRI

MS

SADD

LEBA

G LA

TCH

ACCE

NTS

LUGG

AGE

RAC

K

HOR

N C

OVER

S

ENGI

NE

GUAR

DS RE

GULA

TOR

COVE

RFU

EL IN

JECT

ION

FITT

ING

COVE

R

HEA

D BO

LT &

SP

ARK

PLUG

CO

VERS

CYLI

NDE

R BA

SE &

IN

NER

PRI

MAR

Y CO

VERS

FRON

T EN

D AC

CEN

TS

CRUS

HER

& B

EAST

OVA

L M

UFFL

ERS

MID

-FR

AME

COVE

RS

TRAI

LER

HIT

CH &

AC

CESS

ORIE

S

Refe

r to

prod

uct l

istin

gs in

ca

talo

g fo

r spe

cific

fitm

ent

info

rmat

ion


BI

KE

M

AP

S

DASH

, SPE

AKER

&

GLOV

E BO

X TR

IMS

LEVE

RS

DRIN

K, G

PS &

GA

DGET

HOL

DERS

WIL

D TH

INGS

® P

ERFO

RMAN

CE

ENGI

NE

PROD

UCTS

PERF

ORM

ANCE

AI

R CL

EAN

ERS

L.E.

D. T

AILL

IGH

TS

& T

URN

SIG

NAL

CO

NVE

RSIO

NS

SADD

LEBA

G LA

TCH

ACCE

NTS

TIM

ING

COVE

R

ADJU

STAB

LE

PASS

ENGE

R PE

GS

FLOO

RBOA

RDS

&

COV

ERS CH

ROM

E N

ECK

COVE

RS(N

OT S

HOW

N)

TAPP

ET B

LOCK

AC

CEN

T &

COV

ER

HAL

OGEN

H

EADL

IGH

T BU

LBS

FAIR

ING

TRIM

WIN

DSH

IELD

S

DRIV

ING

LIGH

TS

LOW

ER L

EG

ACCE

NTS

TRAN

SMIS

SION

CO

VERS

THRO

TTLE

SER

VO

MOT

OR C

OVER

STAR

TER

COVE

R CR

USH

ER

EXH

AUST

SWIN

GARM

CO

VER

Refe

r to

prod

uct l

istin

gs in

ca

talo

g fo

r spe

cific

fitm

ent

info

rmat

ion


GRIP

S

PAN

ACEA

L.E

.D.

TAIL

LIGH

TS &

REA

R TU

RN S

IGN

ALS

PASS

ENGE

R

BOAR

DS &

COV

ERS

SADD

LEBA

G AC

CEN

TS

MIR

RORS

SW

ITCH

HOU

SIN

GS &

CO

NTR

OL C

OVER

S

WIN

DSH

IELD

TRI

MS

SADD

LEBA

G

LID

ACCE

NTS

LICE

NSE

PLA

TE

FRAM

ES &

MOU

NTS

MID

-FR

AME

CO

VERS

HOR

N C

OVER

S

SADD

LE S

HIE

LD

HEA

T SH

IELD

S

HIG

HW

AY P

EGS

AXL

E CA

PS

SHIF

T LI

NK

AGES

&

COVE

RS

TRAI

LER

HIT

CH &

AC

CESS

ORIE

S

SPAR

K PL

UG

BOOT

COV

ER

REGU

LATO

R CO

VER

SHIF

T

LEVE

RS

HEA

D BO

LT &

SPA

RK

PLUG

COV

ERS

CYLI

NDE

R

BASE

& IN

NER

PR

IMAR

Y CO

VERS

TAIL

LIGH

T CO

VERS

Refe

r to

prod

uct l

istin

gs in

ca

talo

g fo

r spe

cific

fitm

ent

info

rmat

ion


BI

KE

M

AP

S

DASH

TRI

M

GRIP

S

MIR

RORS

LEVE

RS

SADD

LE S

HIE

LD

HEA

T SH

IELD

S

PERF

ORM

ANCE

AI

R CL

EAN

ERS

L.

E.D.

TAI

LLIG

HTS

&

TUR

N S

IGN

ALS

LUGG

AGE

RAC

KS

FLOO

RBOA

RDS

& F

LOOR

BOAR

D CO

VERS

H

IGH

WAY

PEG

S

BRAK

E PE

DAL

& P

ADS

CHRO

ME

ENGI

NE

COVE

RS

PASS

ENGE

R FL

OORB

OARD

S &

PEG

S

H.I.

D. &

HAL

OGEN

H

EADL

IGH

T LA

MPS

NEC

K CO

VERS

GAS

CAPS

SP

EAKE

RS

CON

TROL

COV

ERS

DRIN

K &

GAD

GET

HOL

DERS

FRON

T FO

RK

ACCE

SSOR

IES

FEN

DER

SKIR

T AC

CEN

T(N

OT S

HOW

N)

CRUS

HER

EX

HAU

ST

LICE

NSE

PLA

TE

FRAM

ES &

M

OUN

TS

WIL

D TH

INGS

®

PERF

ORM

ANCE

EN

GIN

E PR

ODUC

TS

STAR

TER

CO

VER

TIM

ING

COVE

RS

TAIL

LIGH

T CO

VERS

Refe

r to

prod

uct l

istin

gs in

ca

talo

g fo

r spe

cific

fitm

ent

info

rmat

ion


Refe

r to

prod

uct l

istin

gs in

ca

talo

g fo

r spe

cific

fitm

ent

info

rmat

ion

LICE

NSE

PLA

TE

FRAM

ES &

MOU

NTS

SADD

LE S

HIE

LD

HEA

T SH

IELD

S

DASH

TRI

M

PASS

ENGE

R BO

ARDS

& P

EGS

UNDE

RSEA

T PE

GS

GRIP

S

GAS

CAPS

MIR

RORS

SWIT

CH H

OUSI

NGS

&

CON

TROL

COV

ERS

PERF

ORM

ANCE

AIR

CL

EAN

ERS

HIG

HW

AY P

EGS

TAIL

LIGH

TS &

TU

RN S

IGN

ALS

FLOO

RBOA

RDS

&

FLOO

RBOA

RD C

OVER

S

WIL

D TH

INGS

® P

ERFO

RMAN

CE

ENGI

NE

PROD

UCTS

HAL

OGEN

H

EADL

IGH

T LA

MPS

MIR

RORS

& L

EVER

S

FEN

DER

LEN

S GR

ILLS

& T

IPS

FRAM

E &

NEC

K CO

VERS

DRIV

ING

LIGH

TS

AXL

E CA

PS

FEN

DER

SKIR

T AC

CEN

T(N

OT S

HOW

N)

BRAK

E PE

DALS

& P

ADS

CHRO

ME

EN

GIN

E CO

VERS

TAPP

ET B

LOCK

AC

CEN

T &

COV

ERS

INFI

NIT

Y™

TIM

ING

COVE

R

BACK

REST

S

& S

ISSY

BAR

S DR

IVER

BAC

KRES

T (N

OT S

HOW

N)

PAN

ACEA

L.E

.D.

TAIL

LIGH

TS &

REA

R TU

RN S

IGN

ALS

SWIN

GARM

& F

RAM

E CO

VERS

CHRO

ME

BE

LT G

UARD

S(N

OT S

HOW

N)


BI

KE

M

AP

S

NEC

K CO

VERS

GRIP

S SW

ITCH

HOU

SIN

G &

CO

NTR

OL C

OVER

S

GRIP

S

SPEE

DOM

ETER

BE

ZELS

& V

ISOR

S

MIR

RORS

SPEE

DOM

ETER

VIS

OR

GAS

CAP

FORW

ARD

CON

TROL

S

& E

XTEN

SION

S

HEA

DLAM

PS

CON

TROL

COV

ERS

PERF

ORM

ANCE

AI

R CL

EAN

ERS

MIR

RORS

SILV

ER B

ULLE

TS

FRON

T EN

D AC

CESS

ORIE

S

FOOT

PEGS

AXL

E CA

PS

FORK

BR

ACE

& C

OVER

S

PERF

ORM

ANCE

AI

R CL

EAN

ERS

CHRO

ME

EN

GIN

E CO

VERS

IN

FIN

ITY™

TIM

ING

COVE

R

TAPP

ET A

CCEN

T

& C

OVER

S A

XLE

CAP

& C

OVER

S

PASS

ENGE

R

BOAR

DS &

PEG

S

WIL

D TH

INGS

®

PERF

ORM

ANCE

EN

GIN

E PR

ODUC

TS

SWIN

GARM

COV

ERS

TAIL

LIGH

TS &

TU

RN S

IGN

ALS

BACK

REST

S &

SI

SSY

BARS

LICE

NSE

PLA

TE

FRAM

ES &

MOU

NTS

TAIL

LIGH

T &

TUR

N SI

GNAL

LEN

SES

PAN

ACEA

L.E

.D.

TAIL

LIGH

TS &

REA

R TU

RN S

IGN

ALS

PAN

ACEA

L.E

.D.

TAIL

LIGH

TS &

REA

R TU

RN S

IGN

ALS

TAIL

LIGH

T CO

VERS

Refe

r to

prod

uct l

istin

gs in

ca

talo

g fo

r spe

cific

fitm

ent

info

rmat

ion


PakMaster pg 15

Pet Palace pg 15

Windshield Pouch pg 16

Inner Fairing Accents

pg 11 & 118

Windshield Trim, Bat Lashes, & Bat Brow

pg 10


CHROME

TOURING

LUGGAGE

Indulge in the daring world of Küryakyn

accessories. The most extensive product line

available setting the standard for prestige,

excellence, & innovation in motorcycle

accessories. Get the look that gets looks, the

feel that has feeling, & transform what you

ride into why you ride.

AirMasterTM Quick Release Windshields

pg 20

Retractable Passenger Pegs

pg 8

Beast Oval Mufflers pg 232

Hi Five Mach 2 Air Cleaner

pg 24

Floorboards for Driver or Passenger

pg 7


PERFORMANCE

FOOTRESTS

1-1/4”

2”

Few things command a more startling reaction than an intense burst of bright light. Consider this impact when applied to your motorcycle! Lizard Eyes are super bright white L.E.D. strobe lights that multiply the allure of delicious engine chrome when strategically placed under the fuel tank. Control the flash speed from a slow pulse to continuous illumination. Compact size & weather resistant.

5028 Super Strobe Lizard Eyes (kit) $99.99

Note: Lights are 3/4” Diameter x 1/2” Tall.

If you already own our Drink Holder or Accessory Mount & several bikes, our new Mount Kit allows you to easily & affordably bring it with you no matter what bike you’re riding! Additionally, this kit is a great remedy for those “oops” moments that can happen.

Fits: ‘82-’10 H-D Model Clutch or Brake Perch Mounts

1472 Clutch or Brake Perch Mount Kit (ea)

$26.99

Some things just get better over time, like our new Contoured ISO-Throttle Boss! Updated styling combined with a larger surface area & pad provide even more comfort than the original design while still easing hand & forearm fatigue.

Fits: Küryakyn ISO-Grips, ISO-Flame Grips, Transformer Grips, & Braided Grips

6299 Contoured ISO-Throttle Boss (ea) $19.99


D o n ’ t M i s s . . .

The leaders in Driving Lights - we offer many varieties depending on style & location! Make

sure to see them all! See Pgs 42-45

P/N 5005

A l s o A v a i l a b l e . . .

Not for the faint of heart. Easily add any of our multi-color Lizard kits for a dazzling

display of color. See Pg 56

P/N 5021-23

Patent Pending

Light up the night with our slick new Frame Mounted Driving Lights. These luminous lights use a 3" diameter streamlined housing with super white H3 bulbs that provide extra light where it's needed most. Light can be mounted virtually anywhere on the down tubes & can be adjusted with ease. Increase your visibility to others without compromising the style & function of your ride.

5016 For 1-1/8" & 1-1/4" Diameter Tubes Fits: ’93-’08 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings without fairing lowers, ’86-’10 Softails, ’91-’05 Dynas (lower section of down tubes), & ’86-’03 Sportsters

$299.99

5017 For 1-3/8" & 1-1/2" Diameter Tubes Fits: ’09-10 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes without fairing lowers, ’06-’10 Dynas, ’91-’05 Dynas (upper section of down tubes), & ’04-10 Sportsters

$299.99

Patent Pending

Get the custom look that works with the Braided Grips from Küryakyn. Grips are made from a soft synthetic rubber that provide exceptional comfort that’s made to last. The Braided Grips are available in three color combinations & are designed to work with all four-screw grip accessories that fit Küryakyn ISO grips.

6330 Black & Black (pr) $69.99

6331 Black & Red (pr) $69.99

6332 Black & Blue (pr) $69.99

Clutch/Brake Perch Mount

Shown

Snap-N-Go Shown

Patent Pending

Upgrade your Küryakyn Universal Drink Ring to accept most cups, cans or bottles. Easy on, easy off snap design that is also collapsible for storage. Made from PVC leather

& works with any Küryakyn “ring” style drink holder.

1459 Beverage Carrier Only (ea) $9.99

Need the whole package...something to hold your drink & the mount? Choose from the options below & you'll be set.

1460 Snap-N-Go Drink Ring with Beverage Carrier (ea) Fits: Universal Perch Mount or 1" Bar Applications

$29.99

1488 Universal Drink Ring for 1” Bar with Beverage Carrier (ea)

$49.99

1489 Universal Drink Ring for 1-1/4” Bar with Beverage Carrier (ea)

$49.99

1500 Universal Drink Ring with Beverage Carrier (ea) Fits: All '82-'10 H-D Model Clutch or Brake Perch Mounts

$49.99

6333 Black & Black (pr) $69.99

6334 Black & Red (pr) $69.99

6335 Black & Blue (pr) $69.99

Fits: Küryakyn Braided Grips, ISO-Grips, & ISO-Flame Grips

6336 Chrome End Caps (pr) $39.99

1459

1488


NE

W

U N I V E R S A L D R I N K H O L D E R S / p g 6 9

S N A P - N - G O D R I N K H O L D E R S / p g 6 9

H A N D L E B A R A C C E S S O R Y M O U N T S / p g 7 0

A C C E S S O R Y P O U C H E S / p g 7 1

Renderings Shown

Protect your portable GPS with the simplest & most versatile weather resistant pouch available. Our new Gadget Pouch has the ability to accommodate almost any size GPS, cell phone or iPod & can be mounted to the handlebars in seconds without any tools. Touch screen compatible & works with or without Küryakyn accessory mount. Kit includes a foam insert to accommodate smaller GPS units.

Fits: Universal for Bar mounting (3/4” to 1-3/4” Diameter) & Küryakyn accessory mount plates

4195 Universal Gadget Pouch (4-1/4” Tall, 6-1/4” Wide, 3/4” Deep)

$29.99

Back

No other mirrors can compare to these sleek ovals. Featuring a beefy yet light 3 bar mirror stem with double adjustment points & a swivel head, these mirrors lock in just where you want. The convex lens offers increased viewing with approximately 9 inches from mount to mirror end. All mounting hardware included.

Dim: 4-3/4” Wide x 2-1/8” Tall (Convex Lens)

1495 Trident MIrror (ea) $64.99


4-1/4"

6-1/4"


Are you more of the “see where the road takes me” kind of rider but still need to put your accessories somewhere?

See our Small & Large Accessory Pouches! See Pg 71

P/N’s 1478-1479

7540

7541

Adding the comfort of highway pegs to your FL Softail or Touring rig doesn’t have to mean extra clutter. These stealthy highway pegs simply bolt in place on the bottom of the Traditional or Swept Wing H-D footboard. When deployed, they fold out & lock into place, much like a pocketknife blade. A release lever allows them to return to their original, almost invisible position when not in use. A hinge allows them to fold up & back if cornering touch-down occurs.

Fits: ‘84-‘10 Electra Glides (except ‘04-‘05 FLHTCSE & ‘06-‘10 FLHTCUSE), ‘84-‘96 Tour Glides, ‘98-’09 Road Glides (except ‘09 FLTRSE), ‘94-‘10 Road Kings (except ‘04-‘07 FLHRS, ‘07-‘08 FLHRSE), All ’09-’10 Trikes & all ‘86-‘08 FLST/FLSTC, ’90-’10 FLSTF, ‘93-’96 FLSTN, ’97-’03 FLSTS, ’05-’07 FLSTSC

7540 For Traditional Boards $189.99

Fits: ‘06-‘10 FLHX, ’10 FLTRX, ‘04-‘07 FLHRS, ‘04-‘05 FLHTCSE, ‘06-‘10 FLHTCUSE, ‘09 FLTRSE, ’10 FLHXSE, ’10 FLSTSE or any H-D Model with Swept Wing shape boards

7541 For Swept Wing Boards $189.99

7542 Replacement Wear Guards (pr) $10.99

7543 Replacement Rubber Pads (pr) $15.99

4357 Ribbed

Rendering Shown

4351 Premium

4382

Innovative Design Provides Five Mounting Positions

to Choose From

9-1/4" x 5-3/4"

8-1/2" x 4-1/2"

Rendering Shown

Rendering Shown

Rendering Shown

Now you can add floorboards to your Softail without the chance of them rotating or coming loose down the road. These mounts feature interlocking teeth that make adjustments simple & precise.

4371 Fits: ’07-’10 Softail Deluxe with Stock Rear Exhaust Support Bracket Note: If stock exhaust system & rear support bracket has been removed & replaced by a staggered dual or 2-1 system, use P/N 4372.

$69.99

4372 Fits: ’08-’10 FLSTC, FXSTC, ’08-’09 FXSTB, ’10 FLSTSE Note: Will also fit ’08-’10 FLSTN, FLSTF, FLSTFB, FLSTB, & FXSTSSE if the stock exhaust & rear support bracket has been removed & replaced with a staggered dual or 2-1 system.

$69.99

4374 Fits: ’00-’07 FLSTC, ’06 FLST, ’00-’07 FXST & FXSTB, ’07 FXSTC, ’00-’06 FXSTS Note: Will also fit ’05-’06 FLSTN, ’00-’07 FLSTF, & ’07 FXSTSSE if the stock exhaust & rear support bracket has been removed & replaced with a staggered dual or 2-1 system.

$69.99

Patent Pending

Style, Quality, Function, & Adjustability at a price that can’t be beat. Switching to floorboards just got easier & with five thoughtfully placed splined mounts, these boards can be fine tuned just right for the rider or passenger. Available in two versions; Ribbed, featuring a wrinkle black finished base & Premium, featuring a brilliant chrome finished base with chrome inlays in the foot pad rubber.

Mounting Component Sold Separately (Left). Installation on Softail Models Requires Mount Kits. Installation on Other Models in Place of a Male Mount Footpeg Requires P/N 8883. When used with Retractable Passenger Pegs (P/N 4352) NO Adapters are Required.

4357 Ribbed Floorboards for Driver or Passenger (pr) $129.99

4351 Premium Floorboards for Driver or Passenger (pr) $159.99

Note: Boards should not be installed in place of a footpeg on a peg mount secured with a single fastener & no anti-rotation mechanism. The board will apply too much force & loosen the mount from the bike.

Designed for Küryakyn’s folding floorboard products; Ribbed & Premium (P/N’s 4351 & 4357), Transformer II (P/N 4380), & ISO-Boards (P/N’s 7916 & 4455). Avoids a “double jointed” connection to the bike.

8883 Non-Pivoting Splined Male Mount Adapters (pr)

$21.99

Patent Pending

Style is nothing without function & with our new Transformer II Passenger Floorboards you'll get both! Not only will your passenger have a solid & sturdy platform, they'll gain an alternate foot position 4-1/2" higher & 5-1/2" farther forward than stock by way of a retractable cruise arms.

Installs on existing brackets – no additional hardware required.

4382 Fits: Replaces exsisting floorboards on '93-‘10 Electra Glides, ’94-’10 Road Kings (except ’04-’07 FLHRS, ’02-’03 & ’07-’08 FLHRSE), ’98-’10 Road Glides (except ’00-’01 & ’09-’10 FLTRSE), ’93-’96 Tour Glides, & all FLST Models with H-D Accessory Passenger Floorboard Kits

$239.99

Mounting components sold separately (above). Installation on Softail Models requires Mount Kits P/N’s 4371, 4372, 4374. Installation in place of a male mount footpeg requires P/N 8883.

4380 Fits: Passenger Peg Locations – Requires Mount Kit or Adapter (sold separately) $259.99


4384 Full Pad Style Replacement Rubbers (10 pieces) $49.99W W W . K U R Y A K Y N . C O M

NE

W

Rendering Shown

New for 2010 Models with more adjustability than ever! Not only will your passenger be able to cruise in comfort with three usable riding positions, the looks have been transformed with an arm featuring a raised center & a wider profile. Included are the Small ISO-Pegs that can be upgraded to any Küryakyn peg utilizing tapered adapters thanks to the new peg mounting system.

Fits: Stock passenger board mounts on ’10 Electra Glides (except ’10 FLHTCUSE) & '10 Road Kings

4353 Adjustable Passenger Pegs for ‘10 Touring $199.99

Note: Can also be installed an any ’93-’10 Touring Model equipped with H-D accessory passenger board mounts in black or chrome - H-D P/N’s 50378-07A, 50379-07A, & 53070-00A.

Patent Pending

Now you can affordably add Retractable Passenger Pegs to your Street Glide, Road Glide Custom or Road King Custom. Swingarm rotates forward to provide an

additional foot position for your passenger & rotates back out of the way when not in use. Kit includes Trident Pegs for the swingarm that perfectly match

your stock floorboards & passenger footpegs.

Fits: ’06-’10 Street Glides, ’10 Road Glide Custom, ’04-’07 Road King Custom

4352 Retractable Passenger Pegs (pr)

$199.99

Note: Will fit all ’93-’10 Touring Models for customers wishing to remove passenger boards &

convert to pegs.

Looking to get rid of the stock passenger pegs & convert to boards?

Retractable Passenger Pegs (P/N 4352) readily accepts our new Premium

Floorboards, (P/N 4351) without the need for any adapters or mount kits.

43524351

Rendering Shown

Rendering Shown

This mount is the answer for installing highway pegs on frame downtubes. The right angle design allows the peg to be positioned horizontally regardless of the angle of the frame downtube. The added length of the Longhorn Peg makes for incredible comfort. Select the correct size Magnum Quick Clamp for your application (pg 98 - sold separately).

7539 Long Right Angle Mounts with Longhorn ISO-Pegs (pr)

$99.99


Protect your boots from your exhaust pipe. Easy to install & available individually left or right to suit any

riders needs.

U.S. Patent D455,375

Fits: All ’84-’10 Electra Glides (except ’04-’05 FLHTCSE & ’06-’10 FLHTCUSE), ’84-’96 Tour Glides, ’98-’09 Road Glides (except ’09 FLTRSE), ’94-’10 Road Kings (except ’04-’07 FLHRS,

’07-’08 FLHRSE) & all ’86-’10 FLST Models (except ’05-’10 FLSTN, ’05-’06 FLSTFSE, ’08-’10

FLSTSB, & ’09-‘10 FLSTC, ’10 FLSTFB, ’10 FLSTSE)

7544 Traditional, Right (ea) $39.99

7545 Traditional, Left (ea) $39.99

Patent Pending

Fits: ’06-’10 Street Glide, ’04-’07 FLHRS, ’10 FLTRX, ’04-’05 FLHTCSE, ’06-’10 FLHTCUSE, ’07-’08 FLHRSE, ’09 FLTRSE, ’10 FLHXSE, ’10 FLSTSE, or any H-D Model equipped with H-D accessory Swept Wing shape boards

7546 Swept Wing, Right (ea) $39.99

7547 Swept Wing, Left (ea) $39.99

Patent Pending

Go from down & dull to classy & chrome with our new Front Fender Skirt Accent. It chromes the lower portion of your front fender without having to disassemble or even fumble with any tools. Made from chrome plated stamped steel, this new accent will add class thats made to last.

Fits: ’80-’10 Electra Glides, Tour Glides, & Road Kings with original equipment front fender skirt & ’86-’08 FLSTC Heritage Classic, ’86-’90, ’06 FLST Heritage, & ’93-’96 FLSTN Heritage Nostalgia or Special with original equipment front fender skirt

7794 Front Fender Skirt Accent (ea) $44.99

Patent Pending

Protect those legs & keep them looking good! Introducing the Lower Leg Deflector Shields by Küryakyn. These great looking chrome accents not only look good but also protect your factory lower fork legs from the notorious “sand blasting” caused by road debris. Installation is effortless with no tools required.

7763 Fits: ’00-’10 Electra Glides, Road Glides, Street Glides, & Road Kings (pr) $49.99

7765 Fits: ’86-’10 FLST Models (except FLSTSB, FLSTS, FLSTSC); ’91-’10 FXST, FXSTB, FXSTC; & ’06-’10 Dynas (except ‘07-’08 FXDSE, ‘08-’10 FXDF, ‘09-’10 FXDFSE) (pr)

$49.99

Patent Pending

You can never have too much chrome & the transmission shift arm is no exception. The zinc plated stock arm not only looks dull in stock form but it's also a hard part to chrome. Well not anymore! Simply bolt on our Transmission Shift Arm Cover & you’ll get instant “Chromification”.

Fits: ’01-‘10 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes; all ’01-‘10 Softails, & all ’01-‘10 Dynas

1068 Transmission Shift Arm Cover (ea)

$19.99

Patent Pending

Sometimes less is more. Our lens covers maximize the light’s impact with fine illuminated slots & two theme emblems. The eyes of the Zombie & the backlighting of the Flame design shine ominous red for a compelling effect that’s impossible to ignore.

7795 Front Fender Tip Lens Grill (ea) Fits: ‘80-’10 Electra Glides, Tour Glides, Road Kings, Trikes & '86-‘10 FLST Models with Front Fender Tip Lights

$24.99

7793 Rear Fender Tip Grills (ea) Fits: '80- '08 Electra Glides, Tour Glides, Road Kings, & '86-'10 FLST Models with Rear Fender Tip Lights

$24.99

7798 Rear Fender Tip Lens Grill (ea) Fits: ’09-’10 Electra Glides with Rear Fender Tip Lights

$24.99

Rendering Shown

7798

7795


NE

W

Patent Pending

Motorcycling is about being exclusive so break free & show off your bold style with the Deluxe Windshield Trim from Küryakyn. This new windshield trim features detail not possible with ordinary flat trims; including a raised profile slightly above the fairing with a molded rubber liner that will not only dampen vibration but also protect the paint; other features include incorporated snap-in screw covers for a clean look & simple installation.

Fits: ’96-’10 Electra Glides, Street Glides, Trikes, & Küryakyn AirMaster Fairing

1379 Deluxe Windshield Trim (ea)

$69.99

It’s no secret – most top designers in any field would concur. The keys to good looks are keeping it simple & highlighting the contours. Regardless of the color or finish, chrome goes with anything & these elemental accents will add depth & character to the time-honored Batwing fairing. No tools needed & no drilling. Simply clean the surface, peel, stick & admire!

Fits: ’96-’10 Electra Glides , Street Glides, & Trikes

8695 Bat Lashes (ea) $59.99

Bring your batwing fairing to life with the Bat Brow. The brilliant chrome finish goes with any color & adds an individualized edge to really show off your ride. Installation is easy, just clean, peel, then stick & enjoy. Also looks great with our Bat Lashes!

Fits: ’96-’10 Electra Glides, Street Glides, & Trikes

7796 Bat Brow (ea) $39.99


AB

C

A

B

C

F A I R I N G C H R O M E

3793


NE

W

L o o k s G r e a t w i t h . . .

Continue the look through out your entire ride by placing our Front Speaker Grills within

our Rear Speaker Accents! See pg 13

P/N 3792

EF

D

E

D

F

Some Renderings Shown

Patent Pending

Get the over the top look without the over the top price with the Chrome Stereo Accent from Küryakyn. Made from lightweight ABS, this great looking chrome accent is just enough to set your bike in a class all its own. Installation is a snap with no tools or disassembly required.

Fits: '96-'10 Electra Glides, Street Glides, & Trikes

3765 Stereo Accent (ea) $49.99

The problem with beautiful scenery on any ride is that once you go past it, it’s gone. Well here’s one great view that’ll be with you every time you’re in the saddle. This stylized Inner Fairing Accent places the dramatic contrast of black rubber against brilliant chrome in prominent view right above your instrument cluster.


3766 Inner Fairing Accent (ea) $59.99

Patent Pending

Crank it up! Add some visual punch to your speakers so they look as good as they sound!


3793 Deco Speaker Grills (pr) $29.99

3794 Patriot Speaker Grills (pr) $29.99

Renderings Shown

Note: This cover can be used by itself or with our Transmission Shroud (P/N 8654) on ’09 -’10 Models. On ’09-’10 Models equipped with an aftermarket true dual exhaust system where the rear head pipe exits over the top of the transmission to the left side of the bike, use the combination of Küryakyn Transmission Shrouds (P/N 7877) & Rear Cylinder Base Cover (P/N 8394).


Go for the smooth look with the new one piece inner primary cover from Küryakyn. This easy to install one piece cover will transform your bagger from dull to daring in minutes. Combine with the cylinder base cover for the ultimate custom look.

Fits: ’09-’10 Electra Glides, Road Glides, Street Glides, Road Kings & Trikes

7780 Inner Primary Cover (ea) $139.99 Note: Will also fit ’07-’08 Touring models if stock exhaust has been removed & replaced by a 2-1 or staggered dual system. ’07-’08 models with stock head pipes or true duals require P/N 8397.

With a cover that looks this good, we didn’t want to leave anyone out! Our Rear Cylinder Base Cover is now available for ’09-'10 Models & is one of our most popular dress-up items for Touring bikes. With this new design comes added versatility too; it’s compatible with Küryakyn or Vance & Hines True Dual & Stock Head Pipes. Add our Transmission Shroud & the sparkle will be captivating!

Fits: ’09-’10 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes

8694 Rear Cylinder Base Cover (ea) $49.99

These shimmering chrome covers simply fit around your stock rubber plug insulators & are held together with black O-rings. The chrome against black contrast is electrifying! They look great alone, with Scorpion Spark Plug/ Head Bolt Covers or H-D’s Head Bolt Bridges.

Fits: ’99-’10 Electra Glides, Road Glides, Street Glides, Road Kings & Trikes

7770 Spark Plug Boot Covers (pr) $39.99

Patent Pending

Become the leader & get noticed with the latest in L.E.D. technology combined with the utmost in style you’ve come to expect from Küryakyn. Lighting features include red running lights, bright red brake lights, & outer-third flash amber lights when the turn signals are activated. Add style & visibility the Küryakyn way! Mounts to most HD Tour-Paks & can be used with or without luggage racks.

Fits: ’93-’10 Touring Models with King, Chopped, or Razor-Pak Tour-Paks

7767 L.E.D. Run-Turn-Brake Spoiler (ea)

$199.99

A stable relationship! The Harley Touring rig’s relocated front engine stabilizer may have improved vibration control & simplicity but it didn’t do its appearance any favors. Simply add this Front Upper Stabilizer Cover & you’ll enjoy a flashy new look to complement the improved function! Simple installation requires no tools.

Fits: ‘08-’10 Electra Glides, Road Glides, Street Glides, & Road Kings

8697 Front Upper Stabilizer Link Cover (ea)

$29.99


Patent Pending

Chroming a frame the old fashion way is expensive & time

consuming so give your bike a daring dash of chrome the Küryakyn way. The frame covers install in minutes & will vividly enhance the appearance of your Softail all without having to remove the existing footpeg mounts. Add a set of Küryakyn swing arm covers for the ultimate look.

Fits: ’08-’10 FLSTC, ’08 FXST, ’08-’09 FXSTB, ’08-’10 FXSTC, ’10 FLSTSE

7773 Boomerang Frame Covers (set) $99.99

Note: Will fit ’08-’10 FLSTF, FLSTFB, FLSTN, FLSTSB if the stock exhaust has been removed & replaced by a staggered dual or 2-1 system.

Rendering Shown

Despite its incendiary appearance, this hot looking horn cover poses no additional risk of burn or heat damage to skin, pant legs or polishing cloths over the stock cowbell it mounts to. However, viewing through sunglasses may provide some protection from its raging sparkle!

Fits: ‘92-’10 H-D Models with stock cowbell horn cover

7714 Flame Horn Cover (ea) $49.99

Think of how wild visual effects add to a great music video or concert. Now add the same excitement to your Ultra’s sound stage! These bright chrome trim rings install easily on top of the stock black rear speaker rings & come complete with polished stainless hardware.

Fits: '98-'10 FLHTCU, '10 FLHTK, '08-'10 FLHTCUSE, & '09-'10 FLHTCUTG

3792 Rear Speaker Accents (pr)

$29.99

Note: Will also fit ‘98-’10 FLHTC if equipped with Accessory Rear Speaker Kit.

Patent Pending

Classic American styling for your modern American touring bike. Features

include ultra bright rear & side facing dual function L.E.D. lighting & plug & play wiring that makes installation straight

forward & painless with minimal disassembly. The rear & side facing lights are both two-function & can be wired to operate

independently of each other.

Fits: ‘97-’10 Electra Glide Classic & Ultra Classic

7766 Aerion Lightbars $199.99 Note: Will also fit other Touring Models if they have been equipped with H-D Twin Rail Chrome Saddlebag Guard Rails (H-D P/Ns 90982-09 or 91216-97).

Patent Pending

Lids with class! That’s what you’ll get when you add the Slotted Saddlebag Lid Accents from Küryakyn. Designed with rider individuality in mind, the Lid Accents can be positioned according to the rider's preference, centered or off center on top of the bag. Made from high quality chrome plated aluminum & install in seconds with no drilling required.

Fits: ’93-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings with hard saddlebags

7764 Slotted Saddlebag Lid Accents (pr)

$59.99

Have the Corners Run-Turn with the Rears Run-Brake

Have Corners & Rears All Run-Brake

Have Corners & Rears All Run-Turn


NE

W

D e s i g n e d t o A c c e p t . . .

Add any of our stylish Front Speaker Grills for a truly unforgettable look! See pg 11 & 118

P/N’s 3787-90

Because of its location, the plain black swingarm on a Touring rig can easily fade into the background, but it can take center stage when adorned with these sleek chrome accents. Besides their flash & brilliance, the louvered appearance & sweeping

lines add new life & flair that’s sure to impress! Installation requires no tools & just a few minutes of

your time.

Fits: ’09-’10 Electra Glides, Road Glides, Street Glides & Road Kings

8696 Swingarm Accents (pr) $69.99

CPatent Pending

Reclaim your rear fender & lose that boring black stock plate mount with the chrome Curved License Plate Frame from Küryakyn. Featuring the highest quality chrome & the simplicity of a bolt on design, this plate frame is sure to turn heads.

Fits: '10 Street Glides & Road Glide Customs

3157 Curved License Plate Mount $72.99

Flat is not where it’s at! Softail styling is rich with sensuous curves & contours but the stock license plate mount is stark

& industrial looking. Our Curved Laydown License Plate Mount has pleasing lines & a slightly swept mounting

position that blends in instead of sticking out. Silky smooth chrome finish & detail grooves add a classy

finishing touch. Fully compatible with stock Softail Deluxe luggage racks.

Fits: ’05-’10 Softail Deluxe, ‘05-’07 Softail Springer Classic, ‘98-’03 Heritage Springer

3181 Curved Laydown License Plate Mount (ea)

$79.99

Stock Fender Tip Lights are barely noticeable but this hot new Fender Tip Lens Grill sets them ablaze. When illuminated, small holes in the cross member & slots across the top emit a jewel-like light effect; a small detail with a big impact!

Installation takes only minutes & requires no tools.

Fits: ’09-’10 Electra Glide Classic & Ultra Classic Electra Glides

8621 Rear Fender Tip Lens Grill (ea) $29.99

Chrome hardware & rubber isolators dampen vibration between your plate & frame. Available in three styles to accommodate a variety of plate brackets & frames.

Fits: Most license plate brackets & frames

1623 Button Head (kit) $7.99

1624 Acorn (kit) $8.99

1625 Countersunk (kit) $9.99

Patent Pending

Cover those ugly exposed wires the professional way with the Turn Signal Bar Filler Panel from Küryakyn. Not only does this filler panel hide the unappealing wires of your rear light bar, it also gives a finished chrome look that your friends will envy. Installation is hassle free with no tools required.

Fits: ’10 Street Glides & Road Glide Customs

3156 Turn Signal Bar Filler Panel (ea) $18.99

B

A

1623

3156

1624

1625


A

B

C

Patent Pending

It’s the unique & subtle touches that get noticed. That's why we're offering the new Rear Fender Accents! A simple way to get show quality chrome with class. Made from a flexible yet durable ABS, these new accents offer a great way to make your bike as individual as you are.

Fits: ’06-’10 Street Glides & ’10 Road Glide Customs

7797 Rear Fender Accents (kit) $29.99

Patent Pending

No luggage rack, no problem. Acting like an extension of the tour-pak, this bag offers the most storage space with the simplest mounting system for easy on, easy off installation & removal. With a thermo-formed design & reflective piping this bag will hold its shape both empty & full.

Stylish, thermo-formed & molded design

Follows the same shapes & contours of the Tour-Pak, looks like an extension of the Tour -Pak

Mounts directly to the Tour-Pak without a luggage rack

Zippered door opens 3/4 of the way to allow access to bag

Zippered mesh pocket on the inside of the door for items you want to access easily

Main compartment can be divided into three compartments with fold down dividers

Carrying handle & detachable shoulder strap

Reflective piping

Waterproof material & zipper

Comes with brackets & straps for secure mounting

Non-abrasive material on bottom of bag so it won't scratch Tour-Pak

Dim: 26"Wide x 9.5"High x 18.5" Deep

Cubic inches: 2845

4168 PakMaster $169.99

Mesh Windows for Ventilation


NE

W

Patent Pending

Does your small pet like to ride? If so, we have the safest, stylish, & most convenient solution! Place your pet inside, strap it to the bike & you're ready to take your favorite pet

on the safari of a lifetime. Equipped with more features than you can shake a stick at - A drink holder for you & a

food dish holder for your pet. Also a removable washable faux fur comfort liner, built in leash, two large storage compartments

& four mesh windows for viewing & ventilation.

Reflective piping for visability

Highly water resistant fabric, no rain cover needed

Mount on a luggage rack (with or without Tour-Pak) or passenger seat

Top window opens allowing pet to pop it’s head out

Internal frame & rigid bottom provides support for your pet

Carrying handle for easy portability

Bottom & top zipper open for easy cleaning

Can be used as a kennel or pet house for travel

Included Items: Adjustable leash, 2 dishes, 4 metal stakes for securing to the ground, & adjustable straps for mounting to the motorcycle

Dim: 18-1/2" Long x 15” Wide (with pockets) x 13” High

Cubic inches: 2765 (Inside only)

4199 Pet Palace $189.99

Rendering Shown

Patent Pending

Introducing the most useful Windshield Pouch on the market today. Features three separate compartments, a large main compartment that is both waterproof & lockable, a unique

reversible quick detach pouch that mounts to the outside as a map pouch or multi-use pocket & can be stored inside the main

compartment. This pouch is just the right size to hold all your essentials & is made of durable 1200 Denier construction that is thermo-

formed to hold its shape when empty.

Fits: Detachable windshields including Küryakyn Quick Release Windshields

Dim: 20-1/2" Long x 6-3/4" High x 6" Deep

Cubic Inches: 290 main compartment, 370 overall with both pockets

4137 Windshield Pouch (ea) $119.99

Note: Please check for clearance with cables to ensure that bag does not interfere with steering.

Patent Pending

Looking for a fairing bag that can actually hold more than just a pen? Well here it is! This stylish, thermo-formed & molded design is quick detach & features two large pockets with a mesh pocket inside to keep your essentials separate. Quick & easy installation with all mounting hardware included.

Fits: H-D Traditional Batwing Fairing found on Electra Glides & Street Glides

Dim: 24" Long x 5" Deep x 5-1/2” High

Cubic Inches: 220

4138 Fairing Pouch (ea) $79.99

Note: Does not work on AirMaster Fairing or SporTech Detachable Fairing.

Bring everything you need with you! Elastic mesh pockets & multiple pouches make your items readily accessible. 1200 Denier nylon construction, heavy-duty zippers, & zip-out rain cover. Bag also features mounting straps utilizing both hook-&- loop fasteners & elastic shock cords.

Fits: Attaches to Küryakyn Luggage Rack, H-D & other standard racks on the market

Dim: Main bag 21.5" Long x 9.5" Wide x 8" High Two Pockets 4.5" Wide x 9" High x 3" Deep

Cubic inches: 1634

4162 Deluxe Convertible Luggage Rack Bag, Black (ea)

$49.99


S P O R T E C H D E T A C H A B L E F A I R I N G — P L U S

with this new detachable fairing from SporTech. Thermo-formed from the same high-tech materials used on factory fairings & automotive body panels (bumpers). This fairing provides superior fit-&-finish, fade & impact-resistance over other aftermarket fiberglass or acrylic fairings. The outer shell is finished in vivid black automotive paint with clear coat while the stylish inner shell features a black textured surface with a 13.5”W x 3”T x 3”D. storage compartment. Add superior wind-protection & that cool bagger styling for the same cost of most factory windshield kits. Fully customize your fairing with Küryakyn windshield trims, windscreens, & most other accessories compatible with the standard H-D 3-hole windshield pattern. With a simple, 4 fastener mounting system, this beauty comes fully assembled for a quick, easy & secure installation.

Factory quality & construction at an affordable price Thermo-formed inner fairing with integrated storage Automotive quality, durable vivid black painted outer shell with clear coat Leave it black or custom paint it—minimal surface prep required Includes sporty 3” black non-transparent windshield Light-weight—will not adversely affect handling characteristics Simple, 4 fastener installation & removal

Note: Softail applications require mounting kit (sold separately).Note: Requires removal of all pre-existing windshields & windshield mounting hardware for proper installation.

1390 SporTech Detachable Fairing-Plus for H-D (ea) Fits: ‘94-’10 Road Kings (except ’04-’07 FLHRS)

$599.99

1392 SporTech Detachable Fairing-Plus Mounting Kit for Softail Models (kit) Fits: ‘86-’10 Heritage, ’05-‘10 Deluxe, & ’93-’96 FLSTN

$49.99

Note: Installation is possible on ‘04-’07 FLHRS & ‘90-Up Fat Boy (with P/N 1392 for Fat Boy), however it requires removal of chrome wind deflector from Headlight nacelle on FLHRS & the customer is responsible for relocation of stock handlebar mounted turn signals & sourcing hardware necessary for installation.


NE

W

Fully reinforced bag featuring removable shoulder straps, quick

release buckles & internal pockets.

Dim: 20” Long x 7-1/2” Wide x 11-1/2” High

5380 Plain (pr) $359.99

5381 Studded (pr) $379.99

Fully reinforced bag with conchos, removable shoulder straps, quick release

buckles & internal pockets.

Dim: 19-1/4” Long x 7-1/4” Wide x 12-3/4” High

5382 Plain (pr) $339.99

5383 Studded (pr) $349.99

Fully reinforced bag featuring lockable lids, removable shoulder straps, quick release buckles & removable internal organizer.

Dim: 20” Long x 7-3/4” Wide x 11-1/2” High

5386 Plain (pr) $499.99

5387 Studded (pr) $529.99

Fully reinforced bag featuring lid that opens back to front, quick release buckles & internal pockets.

Dim: 23” Long x 8” Wide x 13-3/4” High

5384 Plain (pr) $399.99

5385 Studded (pr) $429.99

Not your average saddlebags. Completely reinforced at all critical points, they scream leather, yet function like hardbags. They’ll hold their shape & will not sag. Created with strength & ruggedness in mind for unsurpassed longevity. Universal – will work on any bike with almost any hardmount saddlebag system.

Edge Brackets + Edge Bags = The Complete Package

Outfit your bike with great looking saddlebags that outperform the rest – but also gain the freedom of having the ability to take the bags off when you don’t need them! Küryakyn has teamed up with Edge Leather & Edge Quick Detachable Brackets to bring you the most complete, versatile Quick Release System in the industry. Once the correct brackets are installed, put on or take off your saddlebags (with no tools) in mere seconds & no obnoxious hardware is left behind!Purchase a Complete Package or purchase the Edge Brackets alone to be used with OEM or other brand bags.

Q U I C K R E L E A S E D E T A C H A B L E S A D D L E B A G S Y S T E M


P/N Softail Applications For Use With Installation Notes Price

5300 All Softail Models with factory 150-170 stock rear wheel tire (except Deuce, Deluxe, Heritage Classic, Heritage Special & Rocker) No Backrest Front Two Bolts $154.99

5301 All Softail Models with factory 150-170 stock rear wheel tire (except Deuce, Deluxe, Heritage Classic, Heritage Special & Rocker) Hardmount H-D or Aftermarket Backrest Front Two Bolts $154.99

5302 All Softail Models with factory 150-170 stock rear wheel tire (except Deuce, Deluxe, Heritage Classic, Heritage Special & Rocker) H-D Detachable Backrest Front Two Bolts $154.99

5303 All Softail Models with factory 200 stock rear wheel (except Deuce, Deluxe, Heritage Classic, Heritage Special, Heritage Springer & Rocker) No Backrest Front Two Bolts $154.99

5304 All Softail Models with factory 200 stock rear wheel (except Deuce, Deluxe, Heritage Classic, Heritage Special, Heritage Springer & Rocker) Hardmount H-D or Aftermarket Backrest Front Two Bolts $154.99

5305 All Softail Models with factory 200 stock rear wheel (except Deuce, Deluxe, Heritage Classic, Heritage Special, Heritage Springer & Rocker) H-D Detachable Backrest Front Two Bolts $154.99

5306 All Softail Models (except Deuce & Rocker) No Backrest Rear Two Bolts* $154.99

5307 All Softail Models (except Deuce & Rocker) Hardmount H-D or Aftermarket Backrest Rear Two Bolts* $154.99

5308 All Softail Models (except Deuce & Rocker) H-D Detachable Backrest Rear Two Bolts* $154.99

5309 Heritage Classic & Heritage Special with H-D Saddlebags Installed No Backrest Rear Two Bolts $154.99

5310 Heritage Classic & Heritage Special with H-D Saddlebags Installed Hardmount H-D or Aftermarket Backrest Rear Two Bolts $154.99

5311 Heritage Classic & Heritage Special with H-D Saddlebags Installed H-D Detachable Backrest Rear Two Bolts $154.99

5312 ‘84-’09 Deuce Models N/A Standard Under Fender $259.99

P/N Dyna Applications For Use With Installation Notes Price

5313 ‘96-’05 Models No Backrest or Hardmount Backrest Turn Signal Relocation Required** $154.99

5314 ‘96-’03 Models H-D Detachable Backrest Turn Signal Relocation Required** $154.99


5316 ‘06-’10 Models No Backrest or Hardmount Backrest Turn Signal Relocation Required** $154.99


P/N Sportster Applications For Use With Installation Notes Price

5318 ‘94-’03 Models No Backrest Turn Signal Relocation Required $154.99

5319 ‘94-’03 Models Hardmount Backrest Turn Signal Relocation Required $154.99

5320 ‘94-’03 Models H-D Detachable Backrest Turn Signal Relocation Required $154.99

5321 ‘04-’10 Models No Backrest Turn Signal Relocation Required $154.99

5322 ‘04-’10 Models Hardmount Backrest Turn Signal Relocation Required $154.99

5323 ‘04-’10 Models H-D Detachable Backrest Turn Signal Relocation Required $154.99

Slide onto the inside edge of saddlebag, insert beverage & ride away.

5388 Saddlebag Cup Holder (ea)

$19.99

*Turn Signal Relocation Required (except Deluxe, Heritage Classic, Heritage Special, Heritage Springer) ** Except Wide Glide & Fat Bob

Conveniently carry both of your saddlebags when you want to remove them from your ride.

5389 EEZ Carry Leather Handle (ea) $36.99

Get the best of both worlds! Now you can mount a set of Edge Saddlebags & keep your stock turn signals. This kit takes all the guess work out of relocating your stock signals by moving them from the fender to the license plate area.

3155 Turn Signal Relocator Kit (kit)

$39.99

3155

Completely adjustable in every direction, allowing you to place your bags exactly where you want them. They’re also lockable, which allows you to safely secure your bags

to your bike. Constructed from solid 10-gauge steel, pretreated & black powder coated. Brackets, keepers & all necessary polished stainless steel hardware is included.


NE

W

6 Degrees of Angle Adjustment! Eccentric lower mounting

point can be positioned forward or back during

installation to tailor windshield angle

Premium .125” Optical Grade, Hard-Coated Polycarbonate

All windshields include Zombie & Grooved interchangeable emblems

Unsurpassed style - Unlike flat, plain-looking outer cross & vertical hardware, our stainless steel outer hardware is beautifully stamped & chrome-plated for a rich, classy appearance

Three heights; Low, Mid, Tall – Choose the look & level of wind protection that’s right for you

Fits: ’05-’10 Deluxe, ’90-’10 Fat Boy, ’86-’10 FLST/C, ’93-’96 FLSTN

2602 Mounting Kit for Heritage, Deluxe, & Fat Boy (ea)

$89.99

Choose Windshield with Large Cut-Out

Fits: ’85-’10 FXST Models (except FXSTS & Rocker/C), ’00-’07 Deuce, ’93-’05 FXDWG, & ’80-’85 FXWG

2601 Mounting Kit for 41mm Wide Glide (ea)

$99.99

Choose Windshield with Small Cut-Out

Fits: ’88-’10 Sportster Models (except ’09-’10 XR1200), ’90-’05 Dyna Models (except ’93-’05 FXDWG), ’88-’94 FXR Models, & ’99-’00 FXR2/3/4

2600 Mounting Kit for 39mm Narrow Glide (ea)

$94.99

Choose Windshield with Small Cut-Out

(2614 Shown)

2614 Light Smoke (ea)

2615 Clear (ea)


2621 Clear (ea)

(2612 Shown)


2613 Clear (ea)


2619 Clear (ea)

(2611 Shown)


2611 Clear (ea)


2617 Clear (ea)

All Windshields $299.99

23” 23” 23”

22”24-!”

26-"”

Ride

r Sho

wn

is 6’

Tal

l


U.S. Patent 6,854,542

Big V-Twins get hot, especially in traffic. Break away form the heat on your Dyna with these stylish saddle shields from Küryakyn. Made from a durable polycarbonate & finished in a reflective smoke, these easy to install saddle shields will keep the heat off & the ride on.

Fits: ’99-’10 Dyna Models

1317 Saddle Shields, Reflective Smoke (pr) $69.99

Patent Pending

Added style & comfort for the long haul. These sleek & smooth chrome bolt-on air deflectors provide just the right amount of air. The sliding vents can be opened or closed depending on conditions.

1311 Fits: ’96-'10 Electra Glides without Fairing Lowers, ’94-’10 Road Kings (except ’04-’07 FLHRS, ’07-’08 FLHRSE) (pr) Note: Compatible with stock detachable Road King windshields. Will also fit ’06-’10 Street Glides IF they are equipped with Küryakyn Driving Lights (P/N 5005).

$99.99

1312 Fits: ’86-’10 FLSTC & ’93-’96 FLSTN (pr) Note: Compatible with stock or Küryakyn AirMaster Quick Release Windshields.

$9.99

Patent Pending

With motorcycles, one size does not fit all. That is why Küryakyn is offering the Quick Adjust Tour-Pak Relocator. The Quick Adjust Tour-Pak Relocator is the first & only to offer a full 4 inches of adjustability without the need for tools. Adjustments can be made without tools 1” forward to 3” back from the stock postition, giving you & your passenger the ultimate in comfort.

Fits: Late ’00-’10 Touring Models with Rigid Mounted Tour-Pak or ’97-’10 Touring Models with H-D Two-Up or Solo Detachable Tour-Pak Racks (P/Ns 53276-04, 53260-02, 53276-09A, 53260-09A, 53246-09A) & a King, Chopped, or Razor-Pak Tour-Pak

8973 Quick Adjust Tour-Pak Relocator (ea) $219.99

Note: Not compatible with amplifiers found stock on Screamin’ Eagle Models or included in H-D’s “Enhanced Sound System”. Not compatible with leather covered Tour-Paks. Will fit ‘98-early ‘00 Touring Models with rigid mounted Tour-Pak if the stock support tube as been replaced with the ‘00-’08 support.

Tastefully display your beliefs with our premium hard-coated polycarbonate 6” windshield! Images are sharp, durable & opaque.


1375 Crosses & Thorns Windshield (ea) $103.99 1311

1312


NE

W

Patent Pending

Comfort & flexibility unlike any other, the best just got better. These passenger armrests come on & off in minutes with no tools & feature pivot joints with variable tension adjusters for the ultimate fit. Compatible with Küryakyn Quick Adjust Tour-Pak Relocator (P/N 8973).

Fits: '98-'10 Touring Models with rigid mounted or detachable King or Chopped Tour-Paks

8979 Quick Disconnect Passenger Armrests $299.99

Note: Not compatible with leather covered Tour-Paks or H-D's original detachable Tour-Pak Rack (P/N 53107-96); 53107-96 is a welded, tubular design.

This great pouch mounts to the underside of any left side Küryakyn armrest & has room for your essential items such as a cell phone, sunglasses, or iPod. In addition to the armrest mount, our pouch also includes a quick detach system allowing to be used as a fanny pack or purse.

Fits: Left side of Küryakyn passenger armrests for Touring Models (P/Ns 8979, 8981, 8982, 8989, & 8992)

Dim: 8-1/4" Wide x 4-1/2" High x 3-3/4" Deep

Cubic Inches: 90

4196 Passenger Armrest Pouch (ea)

$35.99

Patent Pending

Now you & your passenger can go the extra mile with the new passenger drink holders for the Ultra Classic. These non intrusive & easy to reach drink holder s are ready for your favorite beverage. Using chrome plating that is durable & made to last, these passenger drink holders look as good as they work.

Fits: ‘98-’10 FLHTCU, ‘10 FLHTK, ‘08-’10 FLHTCUSE, & '09-'10 FLHTCUTG

1482 Passenger Drink Holder with Basket (ea)

$69.99

1493 Passenger Drink Holder with Stainless Mug (ea)

$69.99

Note: Will also fit ‘98-’10 FLHTC if equipped with Accessory Rear Speaker Kit.

Give your motor the ultimate finishing touch! Works great on all motor bolts using a !” Socket Head Cap Screw. Available in packs of ten - two packs will cover both sides of your motor.

7771 Hollow Point Sleeve & Hot Spot Kit (10 pack)

$15.99


Add additional light where it is needed most with the Clix LED Pods. Now there is no need to fumble with flashlights or try to park under street lights to find your belongings. Lights run on 3 AAA batteries (included) & run up to 100 hours. Great for saddle bags & tour boxes!

1626 Clix L.E.D. Pods (ea) $8.99

Patent Pending

A rock solid trailer hitch can make the difference between smooth sailing & a white-knuckle ride. Our permanent mount hitch attaches at six points. Visible parts are bathed in lustrous chrome; hidden components are black powder coated for maximum rust protection. The kit includes all mounting hardware & a 1-7/8” ball.

Fits: All ’09-‘10 Electra Glides, Road Glides (except ’09 FLTRSE), Street Glides (except ’10 FLHXSE), & Road Kings

7652 Trailer Hitch for ‘09-'10 Touring Models (ea) $259.99

7659 5-Pin Receptacle Kit for Küryakyn Trailer Hitch (P/N 7652) $48.99

®

Includes two pre-paired headsets in one package

Bike to Bike Intercom Communication up to 1,640ft/500 yards

Each headset includes MP3 Jack which allows hook up to an MP3 player for wired stereo music

Compatible with Bluetooth enabled mobile phone, GPS, or another Scala Rider headset

Talk time up to 8 hours, Standby time up to 10 days

AGC Technology- automatically adjusts own volume based on ambient noise

933 Scala Rider Q2 Multiset (kit) $395.99

By Progressive Suspension

Think of it as cheap insurance!

Finally, an inexpensive solution to the handling challenges of many Big Twin Touring Models! Progressive Suspension’s Touring Link is easy to install & does not impact critical ground clearance. The simple connection between chassis & motor allows both to stay in alignment without introducing unnecessary vibration to the rider. The forged steel side plate links the rear of the motor/transmission to the frame with precision bearing rod ends & grade 8 hardware.

Fits: ‘93-‘08 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings

397 Touring Link Chassis Stabilizer (ea)

$199.99


NE

W


Custom brackets for everyone! If you're not a Softail owner but need a way to tie down your ride,

we have two stylish answers. See Pg 207

P/N 928 & 929

Tired of searching for good places to attach tie-down straps to your Harley? The windshield always seems to be in the way & using the handlebars is hard on the riser bushings. These stylish custom brackets bolt to the sides of the front fork & provide a secure, easily accessible point to attach tie-down straps to the front of the motorcycle.

Fits: ’86-’90, ‘06 FLST Heritage, ’89-’10 FLSTC Heritage Classic, ’90-’10 FLSTF Fat Boy, ’10 FLSTFB Fat Boy Lo, ’93-’94 FLSTN Heritage Nostalgia, ’95-’96 FLSTN Heritage Special, & ’05-’10 FLSTN Deluxe

926 Teardrop Tie-Downs (pr) $49.99 Note: Not compatible with AirMaster Fairings or Quick Release Windshields.

You can get a power advantage over your riding buddies without revealing your secret weapon since the stock air cleaner cover is retained!

9448 Fits: ’99-’10 Twin Cams with CV Carb or Delphi Fuel Injection (except ’08-’10 Touring Models & Trikes) (ea)

$169.99

9449 Fits: ’08-’10 Touring Models, & Trikes (ea)

$169.99

Best Performance at the Best Price40% More Breathing Capability Than Kits Without

“End Breathing” Technology of Küryakyn’s Exclusive Filter by K&NNo Restrictive Paper Elements HereIncludes Everything You Need for a Quick & Easy Performance

Upgrade – Retains Stock Outer Cover

Patent Pending

Impress with it’s beauty & stun with it’s performance! The new & improved Hi-Five Mach 2 is the best performing, best looking, & best fitting air cleaner on the market today. Not only can the Hi-Five Mach 2 support well over 140hp, it’s look can be customized & individualized to meet the needs of the most demanding riders with everything from themed medallions to mesh inserts & everything in between. Lead the pack & look good doing it!

9458

Stock Cover Removed

Stock Cover Installed

9451

9451 Complete Hi-Five Mach 2 Air Cleaner Assembly Only

$239.99

9453 ‘91-‘06 XL Models with CV Carb $269.99

9454 ’93-’99 EVO Big Twins with CV Carb $269.99

9455 ’99-'10 Twin Cam with CV Carb or Delphi (except ’08-'10 Touring & Trikes)

$269.99

9456 ’08-'10 Touring Models & Trikes $259.99

Looking for a little variety? Transform your Standard Hi-Five Mach 2 or Zombie Hi-Five Mach 2 in a matter of minutes. Choose the medallion

that suits your mood, remove the center piece on the Mach 2 & apply the medallion. Instantly, you have a whole new look without the expense of

buying a new air cleaner.

37963764 379837973795

9458 ’99-'10 Twin Cam with CV Carb or Delphi (except ’08-'10 Touring Models & Trikes)

$279.99

9459 ’08-'10 Touring Models & Trikes

$269.99

3764 Deco Medallion (ea) Patent Pending $17.99

3795 Flame Medallion (ea) Patent Pending $17.99

3796 Widow Medallion (ea) Patent Pending $17.99

3797 Zombie Medallion (ea) Patent Pending $17.99

3798 Chauvinist Medallion (ea) $17.99

3799 Patriot Medallion (ea) Patent Pending $17.99

3799


Panacea Taillight System

L.E.D. Conversions

Modules & Load Equalizers

H.I.D. Lighting

Headlamps

Driving Lights

Silver Bullet Turn Signals

Light Mounts

Taillights & Turn Signals

Bulbs

Accent Lighting

48335402 5403 48284886 5401

All ‘91-'10 FLST Models (except ‘91-’01 FLSTF, ‘05-’10 FLSTN, ‘97-’03 FLSTS, ‘05-’07 FLSTSC, '10 FLSTSE) x x x xAll ‘02-’10 FXST Models (except ‘02-’07 FXSTD, ‘07-’09 FXSTSSE, ‘08-'10 FXCW/C) x x x x‘91-’10 Electra Glides (except ‘05 FLHTCSE, ‘09 FLHT Standard), ‘98-’08 Road Glides, ‘91-’96 Tour Glides, & ‘94-’10 Road Kings (except ‘07-’08 FLHRSE, ‘09-'10 FLHR) x x x x‘06-’09 FLHX, ‘05 FLHTCSE, ‘09 FLHT Standard, '09 FLTR, & '09-'10 FLHR x x‘01 FXDX/T & all ‘02-’10 Dynas (except ‘09-'10 FXDB, ‘09-'10 FXDFSE, '10 FXDWG) x x x x‘02-’10 XL (except ‘07-’10 XL1200N, ‘09-'10 XL883N) x x x x

Prices $176.99 $176.99 $176.99 $176.99 $176.99 $176.99

Deluxe (Red)

Deluxe (Smoke)

Laydown (Red)

Laydown (Smoke)

Deluxe w/out License Plate Window (Red)

Deluxe w/out License Plate

Window (Smoke)

patented Panacea Taillight System is a revolutionary product. Completely plug & play, this system allows the stock rear incandescent lighting to be transformed into a Multi-Function L.E.D. System.

U.S. Patent 6,714,128


L.E.D. lighting comes on instantly with no delay like there

is with incandescent lighting. This gives the person behind a

quicker warning in a panic stop.

(Adapters are required where listed-Alarm Compatible Load Equalizer is only required if equipped with factory alarm)

485748324831

4830496749494835

6-Pin to 8-Pin8-Pin

Hardware

Alarm Compatible

Load Equalizer

All Models Equipped with H-D Factory Alarm x‘91-’95 FLSTC & ‘93-’95 FLSTN x‘91-’96 Electra Glides, Tour Glides, ‘94-’96 Road Kings x‘04-’10 XL x

Prices $13.99 $13.99 $29.99

IMPORTANT INFORMATION ABOUT PANACEA TAILLIGHTS:1. All wiring for trailer lights must be spliced into the wiring harness ahead of the Panacea control module.2. If the rear of the motorcycle is equipped with any incandescent lights that were not original equipment, such lights must be spliced into the wiring harness ahead of the Panacea control module. Police Models are often equipped with additional lights not found on their civilian counterparts. Be aware that these lights must be rewired, removed, or converted to L.E.D. prior to installing a Panacea system.3. Installation of Panacea Taillights & Turn Signal Inserts may be in violation of FMVSS #108.4. Panacea Taillights can be used on ’97-’01 Dynas, ’96-’01 Fat Boy & FXST (except Deuce), & ’99-’01 XL Models, but they must be used with stock turn signals. Panacea Turn Signals are not available for these applications.

‘91-’10 FLSTC, ‘93-’96 FLSTN, ‘06 FLST x xAll ‘02-’10 FXST Models (except ‘02-’07 FXSTD, ‘07-’09 FXSTSSE, ‘08-’09 FXCW/C), ‘02-’10 FLSTF, '10 FLSTFB, '08-'10 FLSTSB, x x‘91-’10 Electra Glides (except ‘04-’05 FLHTCSE, ‘06-’10 FLHT-CUSE), ‘91-’96 Tour Glides, ‘98-’03 Road Glides, & ‘94-’10 Road Kings (except ‘04-’07 FLHRS, '02-'03 & ‘07-’08 FLHRSE) x x‘06-’09 FLHX, ’04-’09 FLTR, ‘04-’07 FLHRS, ‘02-’03 FLHRSE, ‘04-’05 FLHTCSE, ’06-’09 FLHTCUSE x x‘01 FXDX/T & all ‘02-’10 Dynas (except ‘09-'10 FXDB, ‘09-'10 FXDFSE, '10 FXDWG) x x‘02-’10 XL (except ‘07-’10 XL1200N, ‘09-'10 XL883N) x x

Prices $124.99 $124.99 $124.99 $124.99

Bullet (Red) Bullet (Smoke)Flat Style

(Red)Flat Style (Smoke)

The multi-function L.E.D. Taillight & Turn Signal Kit for bikes with Tombstone Taillights! Just like a Panacea, but all functions illuminate in red!

Fits: ’05-’10 Deluxe, ’05-’07 Springer Classic, ’07-’08 FLHRSE, &’02-’03 FLSTS

5411 Unicea Tombstone Taillight System (kit)

$249.99

U.S. Patent 6,714,128

U.S. Patent 6,714,128

P a n a c e a L i g h t i n g o r R u n - T u r n - B r a k e C o n t r o l l e r s a r e n o t c o m p a t i b l e w i t h H - D a c c e s s o r y o r o t h e r a f t e r m a r k e t m o d u l e s . R e m o v e a l l s u c h m o d u l e s b e f o r e i n s t a l l i n g P a n a c e a l i g h t i n g o r R u n - T u r n - B r a k e M o d u l e s . L o a d

e q u a l i z e r s g e n e r a t e h e a t w h e n i n u s e s o a v o i d u s i n g t h e t u r n s i g n a l s f o r a n e x t e n d e d p e r i o d o f t i m e . N e v e r

o p e r a t e 4 - w a y f l a s h e r s u n l e s s y o u f i r s t r e m o v e t h e l o a d

e q u a l i z e r s .

L.E.D. Silver Bullets, stock turn signals, or other custom single filament lights can be used with the Panacea Taillight System but they will function as turn signals only. The Panacea Taillight will retain all of

its functions (run, pulse brake, & amber directional arrow).

To Realize the Full Benefit of Two-Color, Multi-Function Turn Signals Made Possible by the Panacea System, You Must Use Panacea Rear Turn Signal Inserts.


LI

GH

TI

NG

Your taillight & turn signals are all illuminated RED.

A flashing amber arrow appears on the appropriate side of the taillight & the selected turn signal flashes amber.

Three-pulse “flashes” & then your taillight & turn signals remain brightly lit RED until the brake is released. Amber arrow & turn signal will continue to flash during braking function. Flashing brake feature can be enabled or disabled with the flick of a switch on the control module.

4822 4827 4948 4826

4959 5409 5410497049744972

48254836 4906 4829

‘89-’10 FLSTC, ‘88-’90 FLST, ‘06 FLST, ‘93-’96 FLSTN x x‘05-’10 FLSTN, ‘08-’10 FLSTSB, ‘02-’10 FLSTF, '10 FLSTFB, ‘05-’06 FLSTFSE, ‘05-’07 FLSTSC, ‘02-’03 FLSTS,

x x

‘00-’07 FXSTD, ‘03-’04 FXSTDSE, ‘02-’08 FXST, ‘02-’09 FXSTB, ‘02-’06 FXSTS, ‘07-’10 FXSTC, ‘07-’09 FXSTSSE

x x

‘88-’09 FLHT; '88-'10 FLHTC, FLHTCU, FLHTK; ‘98-’03 FLTR, ‘88-’91 FLTC, ‘89-’96 FLTCU, ‘94-’09 FLHR, ‘98-’09 FLHRC, ‘88-’93 FLHS

x x

‘06-’09 FLHX, ‘04-’09 FLTR, ‘04-’05 FLHTCSE, ‘06-’10 FLHTCUSE, ‘04-’07 FLHRS, ‘02-’03 & ‘07-’08 FLHRSE x x‘01 FXDX/T & all ‘02-’10 Dyna Models (except ‘09-'10 FXDB, ‘09-'10 FXDFSE, '10 FXDWG) x xAll ‘02-’10 XL (except ‘07-’10 XL1200N, ‘09-'10 XL883N) x x

Prices $124.99 $124.99 $114.99 $114.99

Red Illumination – Turn Function Only – Includes Load EqualizerNote: To simplify installation of the load equalizer on most ’97-later Models, see our Load Equalizer Adapter (P/N 4837 - pg 39). For full Multi-Function performance & simplified load equalizer installation, add our Run-Turn-Brake Controller (P/N 4859 - pg 39).

Bullet (Red)

Bullet (Smoke)

Flat Style(Red)

Flat Style(Smoke)

‘89-’10 FLST/C, ‘93-’96 FLSTN x x‘90-’10 FLSTF, '10 FLSTFB, ‘05-’06 FLSTFSE, ‘08-’10 FLSTSB x x x x‘05-’10 FLSTN, ‘05-’07 FLSTSC, ‘07-’08 FLHRSE, ‘97-’03 FLSTS xAll ‘89-’10 FXST Models (except ‘00-’07 FXSTD, ‘03-’04 FXSTDSE, ‘07-’09 FXSTSSE, ‘08-’10 FXCW/C) x x x x91-'10 Electra Glides (except '05 FLHTCSE, '09 FLHT Standard), '98-'08 Road Glides, '91-'96 Tour Glides, & '94-'09 Road Kings (except '07-'08 FLHRSE, '09-'10 FLHR) x x‘06-’09 Street Glides, ‘05 FLHTCSE, ‘09 Road Glide xAll ‘91-’10 Dynas (except ‘09-'10 FXDB, '09-'10 FXDFSE, '10 FXDWG) x x x xAll ‘89-’00 FXR x x x xAll ‘89-’10 XL (except ‘07-’10 XL1200N, ‘09-'10 XL883N) x x x x

Prices $135.99 $135.99 $135.99 $135.99 $135.99 $99.99

The taillights function as run & brake, just like your stock taillight did. Add L.E.D. Turn Signal Conversions & a Run-Turn-Brake Controller (pg 39) & you’ll have a multi-functional, super bright L.E.D. rear lighting package. Each light includes connectors for ’99-later & ’98-earlier style taillight bases.

Deluxe(Red)

Deluxe(Smoke)

Low Profile(Red)

Low Profile(Smoke)

Low Profile w/out License Plate Window

(Smoke) Tombstone

We can give you the

extra light you want with our straight-forward plug-in

L.E.D. Taillight & Turn Signal Conversions. The L.E.D. Circuit Boards are

mounted inside our Stylized Lenses so all you have to do is take off your boring stock lens, remove

the bulb, plug our Connector into the socket & install

our Lens.

Amber Illumination - Run & Turn Functions – Includes Load EqualizerNote: To simplify installation of the load equalizer on most 97- later Models, see our Load Equalizer Adapter (P/N 4837 - pg 39).

‘89-’10 FLSTC, ‘88-’90 FLST, ‘93-’96 FLSTN x x‘05-’10 FLSTN, ‘08-’10 FLSTSB, ‘02-’10 FLSTF, '10 FLSTFB, '10 FLSTSE, ‘05-’06 FLSTFSE, ‘06 FLST, ‘05-’07 FLSTSC, ‘02-’03 FLSTS x x‘00-’07 FXSTD, ‘03-’04 FXSTDSE, ‘02-’08 FXST, ‘02-’09 FXSTB, ‘02-’06 FXSTS, ‘07-’10 FXSTC, ‘07-’09 FXSTSSE, '08-'10 FXCW/C x x‘88-’09 FLHT; '88-'10 FLHTC, FLHTCU, FLHTK; ‘98-’03 FLTR, ‘88-’91 FLTC, ‘89-’96 FLTCU, ‘94-’10 FLHR, ‘98-’10 FLHRC, ‘88-’93 FLHS x x‘06-’10 FLHX, '10 FLHXSE, ‘04-’09 FLTR, '10 FLTRX, ‘09 FLTRSE, ‘04-’05 FLHTCSE, ‘06-’10 FLHTCUSE, ‘04-’07 FLHRS, ‘02-’03 & ‘07-’08 FLHRSE, ‘09-'10 FLHTCUTG, '10 FLHXXX x x‘01 FXDX/T & all ‘02-’10 Dyna Models x xAll ‘02-’10 XL x x

Prices $124.99 $124.99 $114.99 $114.99

Bullet (Amber)

Bullet (Smoke)

Flat Style(Smoke)

Flat Style(Amber)


Note: ’04-’08 Road Glides can also use 4970 & 4959

This handy adapter allows splice-free installation of Küryakyn load equalizers equipped with 3-pin connectors.

Fits: ’97-’10 Electra Glides, ’98-’09 Road Glides (except ’09 FLTRSE), ’06-’09 Street Glides, ’97-’10

Road Kings, ’96-’10 Softails (except ’08-’10 FXCW/C, ’10 FLSTSE), ’97-’10 Dynas (except

’09-’10 FXDB, ’10 FXDWG), ’99-’03 Sportsters

4837 Load Equalizer Adapter (ea)

$13.99

Universal Load Equalizer for use when stock turn signals are replaced with L.E.D. or other low-draw lights. One required for each pair of lights.

4810 2 Amp Load Equalizer (ea) $17.99

This plug-in adapter is required for installation of Panacea Taillights or Run-Turn-Brake Controllers.

Fits: ’04-’10 XL (except ’07-’10 XL1200N & ’10 XL883N)

4831 6-Pin to 8-Pin Adapter (ea) $13.99

This splice-in 8-pin Amp connector is required to install Panacea Taillights or a Küryakyn Run-Turn-Brake Controller.

Fits: ’91-’95 Softails, ’91-’96 Dynas, ’91-’96 Electra Glides, Tour Glides, Road Kings, or ’91-’98 Sportsters

4832 8-Pin Hardwire Adapter (ea) $13.99

Another innovative design, this module plugs into the stock wiring harness & makes single filament custom lights function as running lights & turn signals. It works great with our Halogen Silver Bullets! One controller required per pair of lights.

Fits: ’96-’08 Softails, ’97-’05 Dynas, ’97-’05 Electra Glides, Road Glides, ’97-’06 Road Kings & ’97-’10 Sportsters

4865 Front Run-Turn Controller (ea) $51.99

A marvel of electronic wizardry, this module makes single filament or single circuit turn signals on the rear of the bike function as running lights, turn signals, & brake lights; not just brake/turn like our competitors! It can be used with our L.E.D. Silver Bullets, stock turn signals, or any single filament light you may already have installed on the rear of your bike. Completely plug-in for most ’96-newer Harley-Davidsons with single filament turn signals & a taillight with running & brake functions. Compatible with ’02-later H-D factory cruise control. Pulsing Brake feature can be turned on or off easily.

Fits: ’97-’10 Electra Glides, ’98-’09 Road Glides (except ’09 FLTRSE), ’06-’09 Street Glides, ’97-’10 Road Kings, ’96-’10 Softails (except ’08-’10 FXCW/C, ’10 FLSTSE), ’97-’10 Dynas (except ’09-’10 FXDB, ’10 FXDWG), ’99-’03 Sportsters

4859 Rear Run-Turn-Brake Controller with Pulse Brake Capability (ea)

$79.99

Note: For installation on earlier models or ’04-’10 Sportsters (except ’07-’10 XL1200N, ’10 XL88N), see adapter harnesses listed below.Important: P/N 4859 is not compatible with aftermarket or accessory modules that alter the functions of the stock taillight & turn signals. If you have already made modifications to your bike’s taillight &/or turn signals, you will have to return your bike to stock form before installing our Controller. Bikes equipped with factory security system & low-draw or L.E.D. lights also require P/N 4857.

L o a d e q u a l i z e r s g e n e r a t e h e a t w h e n i n u s e s o a v o i d u s i n g t h e t u r n s i g n a l s f o r

a n e x t e n d e d p e r i o d o f t i m e . N e v e r o p e r a t e 4 - w a y f l a s h e r s u n l e s s y o u f i r s t r e m o v e t h e

l o a d e q u a l i z e r s .


LI

GH

TI

NG

When either a Panacea System or a Run-Turn-Brake Controller is installed on a Late Model H-D equipped with the factory security system (T.S.S.M.) & L.E.D. or low-draw turn signals, the security light will remain lit at all times. The security system remains fully functional, our products do not disable the system in any way. If you find the illuminated security light offensive, simply plugging in this optional load equalizer will correct the situation.

4857 Alarm Compatible Load Equalizer (ea) $29.99

is believing.

Seeing

For 5-3/4” applications, Küryakyn has designed this stunning bottom mount headlight specifically for the XSighting Lighting Xe5R. The housing is deep enough to house the lamp & ballast to eliminate the need to try & hide components on the motorcycle outside of the headlight housing. This bottom mount headlight is also sold by itself & will accept 5-3/4” halogen or incandescent lamps.

Fits: H-D Wide Glide front ends & virtually any aftermarket triple trees with a 3/8” diameter hole to mount the headlight

2259 5-3/4” H.I.D. Headlight Assembly (kit) $599.99

2251 XSighting Lighting Xe5R H.I.D. Headlamp Only (ea)

$439.99

2260 5-3/4” Headlight Only (ea) $259.99

Note: The Xe5R H.I.D. Headlamp WILL NOT FIT ANY STOCK H-D 5-3/4” HOUSINGS. We offer it for replacement in our P/N 2259 or for custom applications.

2260

This diagram clearly shows the improvement in

illumination when comparing an

XSighting Lighting H.I.D. Lamp to a conventional halogen lamp.

Both short-range & long-range visibility are

improved.

Küryakyn has teamed with XSighting Lighting to bring H.I.D. Lighting to H-D Touring Models. We designed an extension ring for the stock headlight housing to create enough room to house the XSighting H.I.D. lamp & ballast assembly. The extension ring is beautifully chrome plated & blends in so well you won’t even know it didn’t come from the factory. Installation is straight forward & easily done with common hand tools.

Fits: All ’80-’10 Electra Glides, Street Glides, ’94-’10 Road Kings, & ‘09-’10 Trikes

2253 Xe7R 7” H.I.D. Headlamp (ea) $499.99

XSighting Lighting H.I.D. Headlamps provide an extraordinary performance upgrade for standard halogen systems, reduces current draw by 47%, emit a whiter / brighter light, & are much more durable than halogen headlamps. As H.I.D. light sources do not utilize a filament, you can expect an H.I.D. Headlamp to last up to 10 times longer.

– Provide three times more lumen output than a standard halogen H-4 headlamp system. XSighting Lighting H.I.D. Headlamps utilize a single

H.I.D. light source to provide both low & high beam functions (we call this bi-function technology). The beam pattern is very intense, wide, & significantly improves the riders ability to see & to be seen.

– Operate at 35 watts or 2.73 amps in both low & high beam functions. Standard H-4 halogen headlamps operate at 55 watts in low beam & 60 watts in high beam & draw 4.3 & 5.1 amps respectively in low &

high beam functions. (Current draw is reduced by 47% with XSighting Lighting H.I.D. Headlamps)

– Not only provide performance, but are uniquely styled to enhance the look of your ride.

2259


2253

2149 7” Headlamp (ea) $99.99

2351 5-3/4” Headlamp (ea) $84.99

2354 4-1/2” Passing Lamps (pr) $139.99

2132 7” Headlamp (ea) $99.99

2131 5-3/4” Headlamp (ea) $79.99

2145 4-1/2” Passing Lamps (pr) $139.99

2147 7” Headlamp (ea)

$69.99

2350 5-3/4” Headlamp (ea)

$72.99

2355 4-1/2” Passing Lamps (pr)

$99.99

Using a 55/60 watt H-4 halogen bulb, these headlights project a strong white beam uniquely directed by a gemstone inspired reflector. This feature results in a focused fan of light, eliminating the dark center usually associated with the use of halogen bulbs. 4-1/2” passing lamps include 35 watt H-3 bulbs.Since these headlights were designed for motorcycles, not cars or a tractors, installation is simple & straight forward.

No modifications are required for most Models, but some Electra Glides & Road Kings require enlarging the hole in the stock backing plate with tin snips, & bikes with shallow headlight buckets may require minor wiring mods using the supplied connectors. No special bulbs are required, replacements are as close as your favorite bike shop. Three different styles are available to complement the styling of your motorcycle. DOT Approved.

D O N O T u s e a n y r e p l a c e m e n t b u l b s t h a t

a r e h i g h e r w a t t a g e t h a n a 5 5 - 6 0 w a t t r a t i n g . T h i s

w i l l v o i d w a r r a n t y .


LI

GH

TI

NG

2149

21472350

2355

23542131

2132

2145

2351

Get This Look! Add High Performance Headlamp Bulbs from Wixtech or PIAA (pgs 54-55)


5007


Now Road Glide owners can also enjoy the darkness-melting power & sleek styling of Küryakyn 3” Driving Lights. This kit’s unique bracket configuration allows placement of these compact lights in the same location as the stock turn signals & also permits full adjustment. Besides being tucked in right next to the fairing, even the wiring is neatly concealed – just plug & play!

Fits: ’98-’10 Road Glides

5007 Driving Lights for Road Glide (set) $399.99

2229 Replacement Super White 35 Watt H-3 Bulb (ea) $10.99


LI

GH

TI

NG

5005


See your ride in a whole new light! This aggressively styled halogen 3” driving light kit gives the traditional batwing fairing an entirely new personality. Compact, stretched bezels & stylized fully adjustable brackets provide a clean, stiletto sharp look with intense, focused light output. The 35 watt H-3 bulb puts out a serious beam of light with lots of options. The complete kit includes everything needed to bolt them on & plug them in.

Fits: ’97-’10 FLHT, FLHTC, FLHTCU, FLHTK, ’04-’05 FLHTCSE, ’06-’10 FLHTCUSE, ’06-’10 FLHX, ‘10 FLHXSE, ’97-’10 FLHR, ’98-’10 FLHRC, ‘04-’07

FLHRS, & ’07-’08 FLHRSE

5005 Driving Light Kit (set) $399.99

2229 Replacement Super White 35 Watt H-3 Bulb (ea) $10.99

Note: Installation does not interfere with removal or installation of stock detachable windshield on Road King Models. These driving lights can also be installed with Küryakyn AirMaster Fairing, P/N 1332, on FLST Models.

Universal Mini Bullets can be used as marker lights or auxiliary turn signals. Their intensity greatly exceeds their small size. The power lead exits the light through the center of the hollow 3/8”-16 x 5/8” mounting bolt; this provides a very sanitary installation. Load equalizer not included. Available with red or amber L.E.D.’s & can also be used with our Adapter Studs (P/N 2288 - pg 49).

2385 Amber (pr) $79.99

2386 Red (pr) $79.99

Get noticed in the day or night! These powerful mini lights seamlessly fit on your fender struts creating a clean look with no exposed wires or fasteners. Each kit comes assembled with clear lenses, but also includes a set of colored lenses that match the L.E.D. output to give you the ultimate flexibility in getting your desired effect.Look close; our CAD-designed lenses are jeweled in appearance. This feature aids in a brighter glow over standard flat lenses. Fits: ’84-’10 FXST & Most Dyna Models through ‘05 (mounts in rear fender strut hole with 5/16” screw)

2280 Red L.E.D. Strut Mount Mini Bullets (pr) $83.99

2281 Amber L.E.D. Strut Mount Mini Bullets (pr) $83.99

Add a sleek new look to your current Mini Bullet lights with a chrome bezel & jewel-like lenses. These lenses are noticeably brighter than standard flat lenses to complete the high-tech package. Each set includes chrome bezels & three sets of lenses (red, amber, & clear). It’s all the little things that count!Use as replacement lenses for Strut Mount Mini Bullets (P/Ns 2280 & 2281) or to update existing Mini Bullets (P/Ns 2385, 2386)

2383 Bezels & Lenses for Mini Bullets (set) $15.99Note: Changing lens color on L.E.D. Mini Bullets will not alter the color emitted.


1” x 2-3/4”

2386

2385

Here’s a slick way to add auxiliary lighting to the front of your bike! Our sturdy chromed steel brackets mount securely to the front fender bosses on your lower legs & neatly mount our sleek 3” diameter driving lights. The mounts allow for easy vertical & horizontal adjustment to direct additional light exactly where you want it. The lights include super white 35 watt H-3 bulbs. Finding replacements is no problem. Includes complete wiring harness.

Fits: ’80-’10 Electra Glides, Tour Glides, Road Glides, Street Glides, Road Kings, & Trikes

5008 Fork Mounted Driving Lights (set) $299.99

2229 Replacement Super White 35 Watt H-3 Bulb (ea)

$10.99

5012

5013

5015

5012


LI

GH

TI

NG

Side Mount

Front Mount

5014

Punch bright holes through the darkness for improved night vision & greater visibility! We’ve combined our super sleek 3” Halogen Bullet Driving Lights with an innovative mounting kit to allow simple installation on exposed 39, 41, or 49mm fork tubes. Unique clamp-on brackets place the driving lights in front of, or to each side of the fork tubes for clearance with other accessories or to get just the look you want.

5012 Fits: 39mm & 41mm Fork Tubes (set)

$299.99

5014 Fits: 49mm Fork Tubes (set)

$299.99

5013 Fits: 39mm & 41mm

Fork Tubes (set) $299.99

5015 Fits: 49mm Fork Tubes (set)

$299.99

Note: When installing Clamp-On Fork Mounted Driving Lights with AirMaster Quick Release Windshields:

41mm Wide Glides can choose either Front or Side Mount styles

39mm Narrow Glides can use only Front Mount style

1-5/8”

2-1/2”

1614/1615

1613

2319

2303

1610

2-5/16”

3-1/4”

2320

2305

Wiring exits the light through the mounting bolt.

2305 Small (pr) $93.99

2320 Large (pr) $103.99

1610 Small Amber; Run-Turn Dual Function (pr)

$119.99

1611 Small Red; Single Function (pr)

$119.99

1612 Small Red; Run-Turn Dual Function (pr)

$119.99

Wiring exits the light through a hole in the body behind the mounting boss.

2303 Small (pr) $93.99

2319 Large (pr) $103.99

1613 Small Amber; Run-Turn Dual Function (pr) $119.99

1614 Small Red; Single Function (pr) $119.99

1615 Small Red; Run-Turn Dual Function (pr) $119.99

Halogen Silver Bullets & Single function L.E.D. Reflector Style Silver Bullets have a single power wire & ground through their mount.

Dual function L.E.D. Reflector Style Silver Bullets have three wires; run, flash, & ground. They cannot be used for run-brake applications because they do not change

intensity; they go from steady-on to on-off flash. When installing Halogen Silver Bullets as driving lights, we recommend using our Wiring & Relay Kit (P/N 2328 - pg 49) to avoid overloading the motorcycle’s running light circuit.

Note: There is no need to use a Load Equalizer with Halogen Silver Bullet kits. Although Silver Bullet lights are extremely bright & highly visible, the installation of this product may be in violation of FMVSS #108 & not intended as a replacement for stock turn signals.

These Lights Can Easily be Combined with P-Clamps, Two-Piece Fork Mounts, Adapter Studs, or Custom Brackets of your Creation—The Options Are Limitless!

Küryakyn Halogen Silver Bullets are assembled with high-shock, heavy duty single filament 20 watt quartz halogen bulbs. We recommend them for use as auxiliary driving lights to help riders see & be seen.

These L.E.D. bulbs provide low-draw & rapid illumination & give you the stunning good looks of a faceted reflector.

1611/1612


These Reflector style L.E.D. Silver Bullets replace stock front turn signals on Dressers, Road Kings, & Heritage Models. They operate as both running lights & turn signals.

Fits: ’83-’10 Electra Glides (except ’04-’05 FLHTCSE, ’06-’10 FLHTCUSE), ’98-’03 Road Glide, ’88-’96 Tour Glides, ’94-’10 Road Kings (except ’04-’07 FLHRS, ’07-’08 FLHRSE), ’86-’10 Heritage/Heritage Classic, & ’93-’96 FLSTN

1616 Large L.E.D. – Amber; Run-Turn Dual Function (pr)

$155.99

These mounts allow you to install Large Silver Bullets in place of stock front or rear turn signals on the models listed above.

Important: Requires Large Silver Bullets with a 3/8”-16 threads, hollow mounting bolts, & a wire that exits through the mounting hole.

2391 Saddle Mounts (set) $24.99

This mounting kit will allow you to install Silver Bullets on 39mm Narrow Glide, 41mm Wide Glide front forks & all 49mm forks on ‘06-’07 Dyna Models.

Important: Requires Small or Large Silver Bullets that have a 5/16”-18 threaded mounting hole & a wire that exits through a

hole in the body behind the mounting boss.

2390 Fork Mounting Kit Only (set) $32.99

1618

1617


LI

GH

TI

NG

1616

2391

2321

2304

2390

Small & Large Halogen Silver Bullets are intended to be installed as auxiliary driving lights. Small L.E.D. reflector style Silver Bullets are two-circuit & meant to be installed as running lights & turn signals.

Fits: H-D Models with 39mm Narrow Glide, 41mm Wide Glide (unshrouded), & ’06-’07 Dyna Models with 49mm forks

2304 Small Halogen (pr) $103.99

2321 Large Halogen (pr) $103.99

1617 Small L.E.D. - Amber; Run-Turn Dual Function (pr)

$155.99

Replace stock front turn signals on ‘88-’03 XL, ’88-’09 FXR, Dyna, Road King or Softail Models with the turn signals mounted underneath the handlebar controls. These lights are compatible with stock, Küryakyn, & most aftermarket mirrors.

1618 Small L.E.D. – Amber; Run-Turn Dual Function (pr)

$145.99

This mounting kit allows installation of Small Silver Bullets under the controls of ‘88-’03 XL & ‘88-’09 FXR, Dyna, Road King, or Softail Models.

Important: Requires Small or Large Silver Bullets that have a 5/16”-18 threaded mounting hole & a wire that exits behind the mounting boss.

2375 Handlebar Control Swivel Mounts Only (set)

$29.99

2310 Small 20 Watt Halogen Bulb - MR11 (ea) $12.99

2313 Large 20 Watt Halogen Bulb - MR16 (ea) $12.99

2312 Small 35 Watt Halogen Bulb - MR11 (ea) $12.99

2314 Large 35 Watt Halogen Bulb - MR16 (ea) $12.99

Note: 35 watt bulbs should be used only with clear lenses in driving light applications. Excessive heat may damage colored lens coatings.

These bulbs are the ideal way to convert Halogen style Silver Bullets or similar lights to L.E.D. Enjoy the low draw & low heat

benefits of L.E.D. by simply changing bulbs.

2225 Small Red – MR11 Type (ea) $18.99

2226 Small Amber – MR11 Type (ea) $18.99

2227 Large Red – MR16 Type (ea) $17.99

2228 Large Amber – MR16 Type (ea) $17.99

Note: Because of the very low amperage drawn on these L.E.D.’s, a Load Equalizer is required - pg 39.

2342 Small - Red 1-7/16” dia. (pr) $11.99

2343 Small - Amber 1-7/16” dia. (pr) $11.99

2344 Small - Clear 1-7/16” dia. (pr) $11.99

2345 Large - Red 2” dia. (pr) $11.99

2346 Large - Amber 2” dia. (pr) $11.99

2347 Large - Clear 2” dia. (pr) $11.99

Outfit your Silver Bullets any way you choose.

2294 Small Standard Bezel (pr) $13.99

2290 Large Standard Bezel (pr) $13.99

2295 Small Visor Bezel, Top Mount (pr) $13.99

2297 Small Visor Bezel, Left & Right Mounts (pr) $13.99

2293 Large Visor Bezel, Left & Right Mounts (pr) $13.99

2293

2295

2297

22902294

2099


2099

Red, single circuit Silver Bullets function as turn signals only, unless combined with our Run-Turn-Brake Controller (P/N 4859).

Fits: ’00-’02 Softails,‘93-‘05 Dyna Wide Glides, ‘00-07 Duece

1619 Small L.E.D.-Red (pr) $155.99

The Küryakyn streamlined Custom Turn Signal Bar is dramatically different than other custom

turn signal bars. Not only is it sleeker, you ditch the bulbous stock turn signals & replace them with

small L.E.D. Silver Bullets (P/N 1619 shown below), sold separately. A flat license plate support is included, but a trick

Curved Frame (P/N 3162 - pg 50) adds an even more impressive look.

Fits: ’91-’10 Electra Glides, Tour Glides, Road Kings, ’86-’10 FLST/C/N

2099 Custom Turn Signal Bar (ea) $83.99

1619

Small Silver Bullet Mounted on Engine Guard

Our sturdy, chrome plated mounts are just the ticket to attach Silver Bullets (or custom lights using 5/16” mounting hardware) to fork tubes. 39mm, 41mm, & 49mm sizes are offered to fit Softail, Dyna, Sportster, & V-Rod fork tubes.

2285 39mm Two-Piece Fork Mounts (pr) $59.99



Looking to add accessories to your Electra Glide, Road Glide, or Street Glide but don’t have a switch or all your switches are used up? This unique & exclusive switch incorporates two independent rockers & fits right in place of an original equipment switch. Each side of the switch operates independently & handles up to a 15amp load. The rockers are black & match the rest of your original equipment switches perfectly.

Fits: ’96-’10 Electra Glides, Road Glides, Street Glides, or Trikes

2201 Double Rocker Switch (ea) $24.99

This mounting kit will allow you to install Silver Bullets on the lower triple tree of Road Kings, Heritages, or Fat Boys. Not compatible with detachable windshields. Important: Requires Small or Large Silver Bullets that have a 5/16”-18 threaded mounting hole & a wire that exits through a hole in the body behind the mounting boss.

2392 Mounting Kit for Shrouded Front Forks (set)

$32.99

Adapter Studs are hollow & threaded 3/8”-16 on one end

& 5/16”-24 the other for mounting Silver Bullets or Mini Bullet lights with

3/8” threaded mounting holes in a 5/16” hole. These come in handy for fender strut applications. The 5/16” diameter end should be cut to length to ensure adequate clearance.

2288 Adapter Studs, 3/8” to 5/16” (pr) $12.99

Get This Look! Combine our Silver Bullets with the correct sized

P-Clamp for your bike!

2389 Hollow Bolts (pr) $7.99

Small Silver Bullet Mounted on Frame Downtubes


LI

GH

TI

NG

When using Halogen Silver Bullets as additional driving lights, we strongly recommend wiring them separately to avoid overloading the headlight circuit. Switch, relay, universal wiring harness & installation instructions included. Not intended for any particular application, but is easily adaptable to any motorcycle.

2328 Universal Wiring & Relay Kit (pr) $31.99

One slick little clamp, our chrome-plated stainless steel P-Clamp has many uses. It works great for mounting Silver Bullets or other lights to frame tubes or engine guards. Its hinged design makes installation easy. Mounting is very secure because our clamp is secured to the tubing by both a flat head screw & the fastener used to attach the accessory. The clamp has a 5/16” mounting hole.

4018 7/8”/1” P-Clamp, Chrome (ea) $20.99

4023 1-1/8”/1-1/4” P-Clamp, Black (ea) $20.99

4024 1-1/8”/1-1/4” P-Clamp, Chrome (ea) $20.99

4019 1-3/8”/1-1/2” P-Clamp, Chrome (ea) $22.99

4017 1-1/2”/1-5/8” P-Clamp, Chrome (ea) $22.99

4014 39mm/41mm P-Clamp, Chrome (ea) $22.99

Here’s a great setup that will allow you to replace your large, stock rear turn signals with these

streamlined, bullet shaped turn signals & relocate your license plate below the taillight. There is a built-in light to illuminate the relocated license plate. The bullet shaped turn signals are single circuit & come equipped

with our stylish deep-dish bezels with red lenses. A flat license plate support is included but an optional Curved

License Plate frame is available separately (P/N 3162).

Fits: ’91-’10 Electra Glides, Tour Glides, Road Kings; ’98-’09 Road Glides, & ‘86-’10 FLST/C/N

2098 Bullet Light Rear Turn Signal Bar (ea) $169.99

A classy upgrade for many popular products including our Bullet Light Rear Turn Signal Bar (P/N 2098) & Custom Turn Signal Bar (P/N 2099).

3162 Curved License Plate Frame (ea) $59.99

Here’s a quick & easy way to hide your bosses after moving your license plate while adding a custom touch at the same time!

Fits: All ‘97-’08 Road Kings (except ’07-’08 FLHRSE), all ’98-’08 Road Glides, all ’97-’08 FLHT Standards, (will also fit ’04 FLHTCSE if antenna is relocated)

1320 Rear Bar Accent (pr) $29.99


3159

3158

Küryakyn makes it easy to give the rear fender on Road Kings, Road Glides, & FLHT Standards a clean, uncluttered look like the

FLHX without breaking the bank. Our Deluxe Kit includes everything you need or if you choose you can purchase the items separately. The Deluxe Kit includes our Bullet Light Rear Turn Signal Bar (P/N 2098), Curved License Plate Frame (P/N 3162), & Rear Bar Accent (P/N 1320) to cover the mounting holes left uncovered by removal of the stock license plate. Buy this kit & save! Whatever your dress-up plan, we have you covered! Fits: ’97-’08 Road King Models (except ’07-’08 FLHRSE), ’98-’08 Road Glide, ’97-’08 FLHT Standard

3000 Deluxe Bullet Light Rear Turn Signal Kit (kit) $239.99

With so many riders using our Side Mount License Plate Mounts or relocating their license plate below the taillight, we needed to come up with an appealing way to cover the exposed holes left in the fender after the stock license plate bracket is removed. Both covers install in minutes

& completely cover the footprint left by the stock mount.

Fits: All H-D Models with standard 3-bolt fender mounted license plate bracket (Both styles also cover

the fourth hole found on some Dyna & Sportster Models)

3158 License Plate Mounting Hole Cover with Emblems (ea)

$31.99

3159 Tribal License Plate Mounting Hole Cover (ea)

$20.99

makes it easy to give your Road King or Heritage the “Street Glide” look with sleek bullet lights & the license plate below the taillight! We offer a complete Bullet Light Turn Signal Bar, slick covers to dress-up the area once the stock license plate mount is removed, taillights without clear license plate

windows, & Custom Curved License Plate Frames to finish it off!

Spruce up your stock taillight with this attractive taillight lens.

Fits: ’73-’98 H-D taillights as well as taillights found on most ’99 Softail Models (does not fit Twin Cam Models)

4962 Laydown Taillight Lens (ea)

$12.99

It’s incredible how much this simple front turn signal swap will streamline the front of your bike! By simply replacing the stock flat turn signals with these sleek bullet bodies, the front end will appear lighter & more proportionate. Mounting is the same as stock for ultra clean installation. A perfect match to Küryakyn Rear Bullet Light Turn Signal Bar (P/N 2098 - pg 50) for a great look front to back!

Fits: ’94-’10 FLHT, FLHTC, FLHTCU, FLHTK, FLHR, FLHRC, & ’96-’10 FLSTC

5011 Bullet Light Front Turn Signal Conversion Kit (set)

$109.99

Note: Kit includes smoke lenses with amber incandescent bulbs. On-bike photo at right shows L.E.D conversions (sold separately).

5451

5450


LI

GH

TI

NG

L o o k s G r e a t W i t h . . .

See Pg 168

P/N 9182

4767

4987

Smokin’ hot! Replace your stock, chunky red taillight lens with these trick, smoke laydown lenses. Includes lens with reflector, iridium coated red bulb, & bulb socket with connector. The red bulb has a chrome-like look, but glows red & will not fade to pink over time.

Fits: L’03-’10 Electra Glides & Road Kings (except ’07-’08 FLHRSE), ’06-’09 Street Glides, ‘L’03-’09 Road Glides, L’03-’10 Dynas (except ’09-’10 FXDB, FXDFSE, ’10 FXDWG), L’03-’10 XL (except ’07-’10 XL1200N, ’09-’10 XL883N), L’03-’10 Softails (except FXSTD, FLSTS, FLSTSC, FLSTN, FXCW/C, FXSTDSE, FXSTSSE, FLSTSE)

5450 Smoke Laydown Taillight Lens (kit) $69.99

5451 Red Laydown Taillight Lens (kit) $49.99

Here is a top quality laydown style replacement lens for Late Model bikes. It only takes a few minutes to replace your bulky, stock squareback lens with this streamlined beauty.

4789 Fits: ’99-E’03 Electra Glides, Road Kings, Road Glides, ’99-E’03 Dynas, ’99-E’03 Sportsters, & ’00-E’03 Softails (except FXSTD, FXSTDSE, FLSTS) (kit)

$69.99

4767 Fits: L’03-’10 Electra Glides & Road Kings (except ’07-’08 FLHRSE), ’06-’09 Street Glides, ‘L’03-’09 Road Glides, L’03-’10 Dynas (except ’09-’10 FXDB, FXDFSE, ’10 FXDWG), L’03-’10 XL (except ’07-’10 XL1200N, ’09-’10 XL883N), L’03-’10 Softails (except FXSTD, FLSTS, FLSTSC, FLSTN, FXCW/C, FXSTDSE, FXSTSSE, FLSTSE) (kit)

$69.99

4987 Fits: ’99-E’03 Electra Glides, Road Kings, Road Glides, ’99-E’03 Dynas, ’99-E’03 Sportsters, & ’00-E’03 Softails (except FXSTD, FXSTDSE, FLSTS) (kit)

$39.99

5452 Fits: L’03-’10 Electra Glides & Road Kings (except ’07-’08 FLHRSE), ’06-’09 Street Glides, ‘L’03-’09 Road Glides, L’03-’10 Dynas (except ’09-’10 FXDB, FXDFSE, ’10 FXDWG), L’03-’10 XL (except ’07-’10 XL1200N, ’09-’10 XL883N), L’03-’10 Softails (except FXSTD, FLSTS, FLSTSC, FLSTN, FXCW/C, FXSTDSE, FXSTSSE, FLSTSE) (kit)

$49.99

Ditch your stock lenses & show some style with the Smoke Lens Kits. Turn signal bulbs are red or amber incandescent & fender tip bulbs are red or amber L.E.D.

Includes fender tip lens with L.E.D. bulb & a pair of smoke turn signal lenses with colored incandescent bulbs.

Fits: ’86-’10 Electra Glides, Tour Glides, Road Kings, & FLST Models with 3-1/4” Flat Turn Signal Housings & Fender Tip Lights

4994 Front Smoke Lens/Amber Bulb Kit (set) $39.99

4995 Rear Smoke Lens/Red Bulb Kit (set) Note: Does not fit ’09-’10 FLHTC, FLHTCU, FLHTK.

$39.99

Includes fender tip lens with L.E.D. bulb.

Fits: ’86-’10 Electra Glides, Tour Glides, Road Kings, & FLST Models with Fender Tip Lights

4824 Front Fender Tip/Amber Bulb Kit (set) $19.99

4823 Rear Fender Tip/Red Bulb Kit (set) Note: Does not fit ’09-’10 FLHTC, FLHTCU, FLHTK.

$19.99

Fits: 3-1/4” Flat Style Turn Signals (’86-’10 Electra Glides, Tour Glides, Road Glides, Road King & Heritage)

4996 Red (pr) $17.99

4997 Smoke (pr) $17.99

Note: Colored bulbs for smoke lenses must be purchased separately - pg 55.

These Outlaw lenses shrink the size of your whole turn signal yet still retain the stock bulb.

Fits: All ’86-’01 H-D Models with Classic Bullet turn signals (XL, FXR, Dyna [except ’01 FXDX/T], FXST [except Deuce], FLSTS & FLSTF)

2125 Outlaw Lenses & Rings, Amber (pr)

$39.99

Note: Installation of this product may be in violation of FMVSS #108.


If you’re using H-D’s accessory headlamp trim rings, our Deep Dish Turn Signal Bezels with Lenses will complete the package by providing a sleeker & racier appearance than the stock lens alone. Bezels & lenses snap into place & still retain the stock bulbs & housings. Fits: ‘00-’10 H-D Models with Bullet Turn Signals

2108 Deep Dish Bezels with Lenses, Amber (pr) $31.99

2109 Deep Dish Bezels with Lenses, Red (pr) $31.99

2107 Deep Dish Bezels with Lenses, Smoke (pr) $31.99

Note: Colored bulbs for smoke lenses must be purchased separately- pg 55.

This slick Curved License Plate Frame was specially designed to put the finishing touches on our Tombstone Taillight (P/N 4992). It accepts 4” x 7” plates & fastens neatly to the existing holes on the base plate.

Fits: Slimline Low-Profile Tombstone Taillight only

9157 Curved License Plate Frame (ea) $69.99

This kit makes it a snap to update the ho-hum Classic Bullets on your bike. Set of four streamlined lights come with Küryakyn Deep Dish Bezels, Smoke Lenses, & Colored Incandescent Bulbs. (Each light measures approximately 2” diameter x 3-1/2” long)

2317 Fits: ’00-’07 FXST/FLSTF, ‘91-’05 Dyna, ‘91-’08 XL

$169.99


LI

GH

TI

NG

4990

4992

Tuck in your obtrusive turn signals with this streamlined Rear Turn Signal Bar. At 8-1/4” long, it’s about 4-3/4” shorter than the stock bar. This die-cast, chrome-plated replacement bar bolts on easily & accepts the stock turn signal assemblies.

Fits: Following Models when equipped with 3-1/4” Flat Turn Signals Housings: ’91-’10 Electra Glides (except ’09 FLHT Standard), ’91-’96 Tour Glides, ’98-’03 Road Glides, ’94-’10 Road Kings (except ’09-’10 FLHR), ’86-’10 FLST/C, & ’93-’96 FLSTN

2384 Narrowed Rear Turn Signal Bar (ea) $51.99

Our Tombstone Taillights put a new face on an old school tradition. L.E.D. technology with a thin, low profile housing

that lays back against the fender; a classic look for the 21st century. Two versions offered. Tombstone Taillight alone gives you a complete run-brake L.E.D. taillight assembly with a thin rubber

gasket. The Tombstone Taillight with Turn Signal Mount includes a complete run-brake L.E.D. taillight, chrome base plate/turn signal mount with built-in license plate light, & a

removable license plate bracket. The turn signal mount requires our sleek Silver Bullets (P/N 1619 - pg 48).

4990 Universal Tombstone Taillight (ea) $135.99

4992 Tombstone Taillight with Turn Signal Mount (ea) $155.99

Note: These taillights will not replace a stock H-D taillight on a stock H-D fender without extensive modification & fabrication. Installation of this product may be in violation of FMVSS #108.

The Rainbow Strobe is a small cage assembly that slips over an H-4 style halogen bulb, creating a colorful pattern within the headlight. Although the beam is, for the most part, unaffected, some blue, green, & red coloring occurs. Installs with ease. Check regulations for suitability in your area. For use with H-4 halogen bulbs with three prong base.

2141 Rainbow Strobe (ea) $31.99

Extend visual lighted range approximately 30%

Extreme white appearance, 4100K color rated

Affordable price for the light you want

H-4 Bulb with p43T base (direct replacement for H-D headlights)

2222 Extreme Xenon Super White Bulb, 60/55 Watt (ea)

$29.99

Limited Lifetime Warranty from WixTech

30% brighter than stock

Extreme white appearance for an affordable price

Looks great with upgraded brighter headlamps

27 watt 881 style bulb is a direct replacement for late ’05-’10 H-D passing lamps

2224 Super White Bulb (pr) $29.99

These bulbs are the most common H-4 bulbs used in motorcycle applications. Direct replacement for stock H-D H-4 bulbs.

2137 90/100 Watt (Clear) High Intensity (ea) $9.99

2134 55/60 Watt (Rainbow) Foul Weather, Rain or Fog (ea)

$12.99

2144 55/60 Watt (Premium Blue) Brightest, Light Most Closely Resembles Sunlight (ea)

$12.99

2142 55/60 Watt (Blue/White) Equal to 100 Watt Clear (ea)

$19.99

An inexpensive way to upgrade from incandescent to L.E.D. bulbs. Advantages include low draw, long life, & resistance to vibration. Due to the directional design of these bulbs, it is necessary that the bulb face the lens for proper illumination. Not recommended for ’99-E ’03 taillights or ’86-’10 flat lens turn signals found on Dresser, Road King, or Heritage Models.

4815 Red L.E.D. Single Circuit Bulb (ea) Replaces 1156

$11.99

4816 Red L.E.D. Dual Circuit Bulb (ea) Replaces 1157

$12.99

4817 Amber L.E.D. Single Circuit Bulb (ea) Replaces 1156

$11.99

4818 Amber L.E.D. Dual Circuit Bulb (ea) Replaces 1157

$12.99


Each bulb features 32 mega-bright red L.E.D.’s in a completely sealed package. The unique design provides full hemispherical illumination. Its dimensions are the same as a standard 1156 incandescent bulb so it can be used as a direct replacement for those applications.

4801 Red L.E.D. Single Circuit Bulb (ea) Replaces 1156

$39.99


An L.E.D. replacement for 12 volt #161 or #168 style push-in bulbs. These are a great way to reduce the load on your charging system if you’ve added additional lights! Available in red or amber.

4802 L.E.D. Wedge Bulb, Red (ea) $10.99

4805 L.E.D. Wedge Bulb, Amber (ea) $10.99

Fits: All H-3 bulb applications including Küryakyn 3” Driving Lights & Adjure Passing Lamps

2127 35 Watt Standard Replacement (ea)

$10.99

2229 35 Watt Super White (ea) $10.99

W h e n u s i n g L . E . D b u l b s

f o r t u r n s i g n a l s , a

L o a d E q u a l i z e r m a y b e

r e q u i r e d . P g 3 9 .


C o m p a t i b l e W i t h . . .

See your ride in a whole new light! Aggressively styled with multiple mounting options available - you’re sure to

be enlightened with any set you choose! See Pgs 22 & 42-45

P/N’s 5005, 5007, 5008, 5012-15, 5016-17

White Technology

Match these bulbs to both headlights & other accessory lights for a sleek, unified appearance. Choose from a single filament or dual filament for your specific application. These bulbs are used for turn signals & brake lights making you more visible for a safe & enjoyable ride.

2216 Xtreme White Plus (pr) $18.99

2217 Xtreme White Plus (pr) $20.99

White Technology

Xtreme White H-3 Bulbs are a great upgrade for your factory motorcycle headlamps. They provide a brilliant Xtreme cool white light rated at 4150K to enhance your headlights.

2214 Xtreme White (ea) $41.99

For a stylish look, PIAA offers the Super Plasma GT-X H-3 Bulb. With a rating of 5000K, it will give your factory lights a beautiful bluish-purple look. No need to sacrifice performance for style. With PIAA’s XTRA technology you’ll have plenty of power.

2215 Super Plasma GT-X (ea) $41.99

The H-4 Super Plasma GT-X Bulb uses PIAA’s twin color technology to provide a Super Plasma low beam which produces a bluish-purple look & a Super White high beam for superior light output

2211 Super Plasma GT-X (ea) $49.99

XTRA Technology

By utilizing quartz glass, PIAA’s Anti-Vibration bulb allows better dissipation of heat. A thicker diameter filament support is fixed to the glass tube allowing the bulb to withstand a large range of motion. The Xtreme White Plus Technology adds a blue topcoat on the bulbs adding a slight blue tint without sacrificing performance.

2210 Xtreme White Plus (ea) $49.99

Direct replacements for 1156, 1157 or 3157 bulbs, these red & amber bulbs are just the ticket for bikes with clear or smoke turn signal lenses.

4812 Red- Replaces 3157 (ea) $4.99

4813 Amber-Replaces 1157 (ea) $2.99

4814 Red-Replaces 1156 (ea) $7.99

This bulb looks psychedelic, but it glows as red as the cherries on a cop car. This is the best red bulb we’ve been able to locate. It absolutely will not fade to pink over time. If you’re running a clear or smoked lens, this is the only way to go. Replaces 1157 – two circuit bulbs.

4811 Iridium Coated Red Bulb (ea) $19.99

This self-modulating bulb warns drivers behind you of your deceleration. Apply the brakes & the bulb pulses rapidly & then remains brightly illuminated as long as the brakes are applied. Sold as a pair to outfit the Tour-Pak® on H-D Ultra Classics or individually to cover most 1157 taillight applications. Includes spare G4 2-pin Halogen bulb.

Fits: Replaces 1157 bulbs in run-brake taillight applications

925 Super Bright Pulsing Bulb (ea) $49.99

919 Super Bright Pulsing Bulb (pr) $79.99


LI

GH

TI

NG

PIAA utilizes the latest in integrated computer-aided technology. Only the highest-grade materials are selected for use in PIAA

products & to ensure complete satisfaction, every bulb is 100% tested at each step of the manufacturing process.

Blue

White

Yellow

Red

5250K Sunlight5000K Super Plasma- -4300K H.I.D. Bulb- 4000K Xtreme White Plus 3800K Super White --3200K Standard Halogen - Bulb2600K Standard - Incandescent Bulb

W h e n i n s t a l l i n g L i z a r d L i g h t s , a l w a y s m a k e s u r e t h e w i r e s a r e l i n e d u p w i t h w i r e c o l o r s m a t c h i n g ( r e d a c r o s s f r o m r e d ) . A l w a y s t e s t t h e l a y o u t b e f o r e i n s t a l l i n g . T h i s c a n s a v e t i m e & p o t e n t i a l a g g r a v a t i o n . I t i s a l s o i m p o r t a n t t o r e m e m b e r t h e m a x i m u m l o a d o n o n e s w i t c h i s 1 6 l i g h t s . P a r t N u m b e r s 1 3 0 1 , 8 4 1 6 & 8 4 1 5 a r e a l l e q u a l t o 4 l i g h t s e a c h .

Everything you need to light up your bike! We’ve made it easy to mount & wire these lights with simple plug-&-play installation. Contains eight seven color Lizard Lights, controller, four “Y” connectors, four double male connectors, six double female connectors, six 9” extensions, two 12” extensions, two 18” extensions, alcohol pads, dielectric grease, cable ties, & spare adhesive pads.

5021 Seven Color Super Lizard Maximus Kit (ea) $329.99

Want to light up your bike without the big price? This kit comes with all the pieces needed to light up your ride. Contains four seven color Lizard Lights, controller, four 9” extensions, two 12” extensions, alcohol pads, dielectric grease, cable ties, & spare adhesive pads.

5022 Seven Color Super Lizard Light Starter Kit (ea) $179.99

Not enough glow on your bike? Add this expansion kit that simply plugs into your existing Super Lizard set-up for a little extra light. Contains two seven color Lizard Lights, two 12” extensions, two “Y” connectors, two double male connectors, two double female connectors, alcohol pads, dielectric grease, cable ties, & spare adhesive pads.

5023 Seven Color Super Lizard Light Expansion Kit (ea) $89.99

The Chameleon of L.E.D. Accent Lights Offers Three Spectacular Modes:

Single Color Steady Illumination Single Color Flashing Illumination With Variable RatePaint Mode: All Lights in Unison Continuously Cycle Through All Seven Colors (Red, Lime, Ice Blue, Sky Blue, Dark Blue, Purple, Green) with an Adjustable Variable Rate


5021

5022

5023

S T R E E T G L I D E — S U P E R L I Z A R D S


LI

GH

TI

NG

Note: Super Lizard Lights are not compatible with previous generations of Küryakyn Accent Lighting.

Disclaimer: Laws & enforcement of laws pertaining to auxiliary lighting vary from state to state. If you are concerned about your area, we encourage you to check with your local authorities before making your purchase.

4715 Super Lizard/Lizard Light Switch Controller (ea) $31.99

4712 “Y” Connector (pr) $10.99

4716 Double Male Connector (pr) $4.99

4717 Double Female Connector (pr) $4.99

4718 3” Extension Wire (pr) $9.99






4728 Replacement Adhesive Pads (set/6) $5.99

4768 250V/3 Amp Fuse (ea) $3.99

The colored versions can be used as accent lights or auxiliary turn signals. Use the white lights to illuminate the inside of your saddlebags & trunk or Tour-Pak. The compact chrome housing is 1-1/2” long, 3/4” wide, & 1/2” tall with two screw holes. Each light has two 6” wire leads that can be spliced into any 12v circuit.

4702 Red (ea) $10.99

4703 Amber (ea) $10.99

4705 Blue (ea) $11.99

4707 White (ea) $12.99

Offers Same Spectacular Modes as our Super Lizard Lights:

Single Color Steady Illumination Single Color Flashing with Variable RatePaint Mode


This controller allows you to upgrade your new or existing Lizard Lights or Infinity Covers to be controlled by a compact remote control. The remote control allows you to turn the lights on & off; select steady-on, flash, or paint mode; & adjust rate-of-flash or rate-of-change in paint mode. Each kit includes switch receiver & one remote control. Replacement remote control units are available separately, but only one remote can be programmed to a switch receiver at a time.

For use with Küryakyn Lizard Lights/Super Lizard Lights, Infinity Streamliner, Infinity Air Cleaner Cover, Infinity Timing Cover, or Infinity Saddlebag Latches.

4799 Remote Control for Lizard Lights (ea)

$49.99

1305 Replacement Remote Control (ea)

$20.99

See where your imagination takes you by adding our 8” flexible, low profile L.E.D. lighting strips to your ride! Long Lizard Lights are a seven color,

low profile L.E.D. lighting alternative ideal for a wide range of applications & mounting options. A trouble-free way to light your ride, Long Lizard kits

include two 8” lights with 12 seven-color L.E.D.’s per light for the perfect fit under most H-D & Metric tanks. Also works great under saddlebags for cool ground lighting effects. Get a smooth, even glow without the spotlighting of pod style L.E.D.’s. Purchase a Lizard Light Controller (P/N 4715) & make your Long Lizards a great starter kit, or add Long Lizards to your existing Super Lizard Light (P/N’s 5021, 5022 or 5023) set-up for even more glow! Simple plug-&-play wiring makes installation easy & includes everything you need.

5025 Long Lizards Expansion Kit (ea) $179.99

Note: Long Lizard Lights do not come with a controller (P/N 4715) & will flex to a maximum 10” radius.

Grips

Grip Accessories

Throttle Assists

Gauges

Handlebar Accessories

Levers

Control Covers

Mirrors

Handlebars

®

®

®


new

Rendering Shown

® U.S. Patent D411, 432

For the rider who demands the ultimate in comfort & style, Küryakyn offers the ISO-Grip. Styled to match the popular ISO-Pegs, they dampen handlebar vibration while providing a sure, cushioned feel for long haul comfort. Because of their unique removable end caps, this is one of the only custom grips available that may be used with stock air reservoir type handlebars.

®

6212 Fits: ‘82-’10 H-D Models with dual cable throttle control (pr)

$84.99

6228 Fits: ‘08-’10 H-D Models with electronic throttle control-All ‘08-’10 Electra Glides, Road Kings, Road Glides, Street Glides, & Trikes (pr)

$84.99

®


$74.99


$74.99

Patent Pending

Transform the look & feel of your ride! Bright chrome grip bodies & sculpted end caps provide a solid feel, while contrasting soft

black rubber inlays absorb vibration & provide comfort for miles on end. Transformer

Grips also allow you to match any Küryakyn theme parts already used on your bike with interchangeable Widow, Zombie or Maltese Cross medallions included with each pair.


$89.99


$89.99

6294 Transformer Throttle Boss (ea) Fits: Left or Right Grip

$16.99

6289 Replacement End Caps (pr) Fits: Transformer, ISO-Grips & ISO-Flame Grips

$29.99

Note: Transformer Grips accept all grip end accessories except Accent Rings, Zombie & Widow Grip End Caps, or ISO-Throttle Boss.


HA

ND

LE

BA

RS

6294

®

6271 Fits: ‘82-’10 H-D Models w/dual cable throttle control (pr) $99.99

6276 Fits: ‘08-’10 H-D Models w/electronic throttle control-All ‘08-’10 Electra Glides, Road Kings, Road Glides, Street Glides, & Trikes (pr)

$99.99

®

6274 Widow Throttle Boss Kit (ea) Fits: Throttle Grip Only

$25.99

6277 Replacement Widow End Cap Kit (ea) Fits: Clutch Grip or Throttle Grip without Throttle Boss

$20.99

® U.S. Patent D560,463 & D576,012

Our spider themed hand grips are a radical departure from average. Designed with style & comfort in mind, with an integrated, adjustable throttle boss, these grips make a great addition to our Widow Series.

®



$109.99


Your Widow Grips can meet a sinister end. Add versatility with these Zombie emblems. Can be used as direct replacements for Zombie Grips or to change Widow Grips to Zombie theme. Each includes two emblems & four screws.

6278 Zombie Emblems (pr) Fits: Grips with Throttle Boss

$19.99

6279 Zombie Emblems (pr) Fits: Grips without Throttle Boss

$19.99


Purely wicked! Smooth chrome bodies with vibration absorbing rubber inserts assure a comfortable & secure grip to keep control in hand. Zombie end caps enhance the specter of evil as the numbers of this coven of accessories continue to multiply.

6295 Fits: ‘82-’10 H-D Models w/dual cable throttle control (pr)

$109.99


$109.99



$99.99

6286 Zombie Throttle Boss Kit (ea) Fits: Throttle Grip Only

$25.99

6281 Replacement Zombie End Cap Kit (ea) Fits: Clutch Grip or Throttle Grip without Throttle Boss

$20.99

6295

Either by themselves or used along with our line of Pilot Footpegs, Pilot Grips are a great addition to your scooter. Comfortable raised rubber pads provide a secure grip area, while the chrome body adds a subtle accent to highlight other accessories.


$74.99


$64.99


$64.99

6252 Pilot Throttle Boss (ea) $17.99


HA

ND

LE

BA

RS

®

6250 ISO-Throttle Boss (ea) $17.99

6253 ISO-Throttle Boss (pr) $31.99

®

Our ISO-Flame Grips have a unique flamed pattern in the soft & cushy raised rubber pads. Finished off with a Maltese Cross emblazoned end cap & smooth trim ring for that additional bad attitude. This grip accepts our wildly popular ISO-Throttle Boss, which greatly aids your hand on those long rides to the next rally.

®


$74.99


$74.99

Replacements for ISO-Grips or styling update for ISO-Flame, Transformer Grips, or Braided Grips. Includes screws.

6243 Pair $25.99

6244 Each $13.99

®

Go farther & look better. Added weight enhances the ISO-Grips’ vibration damping qualities, while aggressive polished aluminum bullet style combines form with function. Mount with existing hardware.

Fits: All Küryakyn ISO-Grips, ISO-Flame Grips, Transformer Grips, & Braided Grips

6239 Baron Bullet Grip Ends (pr) $44.99

®

Add a little flair to your ISO-Grips with these top grade leather fringed end caps from Iron Braid. 16” fringe complements fringed saddlebags, levers & jackets.

6215 ISO-Caps with Black Leather Fringe (pr) $59.95

Note: Not compatible with air reservoir bars.

This trick little device adds both a locking helmet holder to the end of your grips as well as functions as a bar end weight to assist in stabilizing. Simply slide your helmet D-Ring into the slot or use the provided helmet lock extension & lock it in.


6247 KewLock (ea) $39.99

6248 KewLocks (pr) $79.99

Replacements for ISO-Flame Grips or styling update for ISO-Grips, Transformer Grips, or Braided Grips. Includes standard length screws.

6245 Maltese Cross End Caps (pr) $25.99

Patent Pending

Few things can take the enjoyment out of a great ride like numb, tingling fingers. Küryakyn Grips are an excellent first step to keep vibration in check, but now you can improve their legendary comfort even more! Grip End Weights quickly install on the end of each Grip adding mass & length to further reduce high amplitude handlebar vibration. Their sculpted appearance & bright chrome finish also add a high-tech look to your already hot looking grips.


6238 Grip End Weights (pr) $39.99

6338 Grip End Weight (ea) $21.99


new

1593

1591

1594

Simple replacements for the existing end caps on Küryakyn ISO-, ISO-Flame, Transformer, or Braided Grips. Installation is a breeze. Screws supplied for use with or without Throttle Boss.

6249 Stiletto End Caps (pr) $39.99

6220 Chrome (pr) $8.99

6222 Blue (pr) $8.99

6223 Gold (pr) $8.99

6224 Purple (pr) $8.99

6225 Green (pr) $8.99

6226 Black (pr) $8.99

6264 Black (pr) $9.99

6265 Red (pr) $9.99

6266 Blue (pr) $9.99

Allows use of up to three accent rings (two if used with Throttle Boss).

6219 Longer Stainless Screws (set of 8) $7.99

Clean up the look of your bike with these two-piece chrome-plated die-cast clamps that keep cables & oil lines where they belong.

1591 Throttle Cable Clamp to Secure Dual Throttle Cables to a 1-1/4” Diameter Bar (ea)

$16.99

1593 Clamp to Secure 5/8” Diameter Oil Line or a Clutch Cable to a 1-1/4” Diameter Bar (ea)

$16.99

1594 Clutch Cable Clamp for 1-3/8” Diameter Bar (ea)

$16.99

Heat your grips for those cool riding days. With 4 levels of heat & built in thermistor, this smart system allows you to set & keep your desired temperature. The controller & switch is built right into the clutch perch clamp with L.E.D. indicators that dim for night riding. Installation works with any grip & includes everything you need for proper installation. Ride on with warm hands after you install your Heat Demons.

Fits: ‘82-’10 H-D Models with 1” handlebars (except ‘08-’10 Touring Models & Trikes with electronic throttle or any models with air reservoir handlebars)

6282 Black Heat Demons Grip Warmers (set) $129.99

6283 Chrome Heat Demons Grip Warmers (set) $129.99

Note: Installation requires drilling one small hole in bottom side of left handlebar & may require re-installation of left hand grip with included adhesive.


HA

ND

LE

BA

RS

®

Added to our popular ISO-Grips, this little jewel can make all the difference in the world on a long ride. The Throttle Boss is a small adjustable paddle that is positioned under the palm of the throttle hand allowing the driver to slightly relax their grip on the gas & still maintain a constant speed.

Fits: ISO-Grips, ISO-Flame Grips, Transformer Grips, or Braided Grips. (Can also be installed on the left grip for a matched set)

6250 ISO-Throttle Boss (ea) $17.99

6253 ISO-Throttle Boss (pr) $31.99

Regardless of what type of bike you ride, the Throttle Boss

will make riding any distance more comfortable. Designed to fit any type or

size grip, the Throttle Boss can be installed in seconds to provide a cushioned platform for your palm. This allows you to vary or maintain a speed without keeping a tight grip on the throttle. Removes quickly without tools to stow in jacket pocket, tool bag, etc.

Fits: Any application with twist grip throttle

6251 Universal Throttle Boss (ea) $11.99

6285


D o n ' t M i s s . . .

Updated styling combined with a larger surface area & pad provide even more comfort than the

original design. See Pg 4P/N 6299

Enjoy those longer rides & relax your throttle hand with the Mechanical Throttle Assist. This is the simplest & cleanest looking throttle position holder available. Attaching to the end of your handlebars, this beauty looks like a bar end weight. Simply hold the throttle at desired location & roll your little finger back to hold your throttle in position. The spring loaded tensioner makes it easy to set without over tightening for easy throttle shut down when needed. Add the left side for a bar end weight matched pair & ride on in comfort.

Fits: All H-D Models with 1” or 7/8” handlebars with hollow bar ends & OEM or Küryakyn ISO- & Transformer style grips (except ‘08-’10 Touring Models & Trikes with electronic throttle, heated grips or air reservoirs in handlebars)

6285 Mechanical Throttle Cruise Assist (ea) $89.99

6288 Clutch Side Matching Bar End Weight (ea) $39.99

Note: Proper installation may require cutting or drilling a 5/8” hole in the end of the OEM grips. Proper installation requires 7/8” or 1” handlebars that have open ends. Will not install with K ryakyn Chrome Throttle Bosses.

The Throttle Rocker attaches to the grip with a Velcro strap & allows you to maintain a steady

cruising speed without keeping tight grip on the throttle.

Fits: Any application with twist grip throttle

6255 Right (ea) $10.99

6256 Left (ea) $10.99

Our L.E.D. Battery Gauge is an array of L.E.D.’s indicating the operating

voltage of the bike’s electrical system. Green L.E.D.’s represent the normal

operating range of your charging system, 12.5v to 14.5v. Amber L.E.D.’s warn the rider that the bike is not

charging. If the reading drops below 10v or exceeds 15v, a flashing red L.E.D. will alert the rider of an impending stall or the possibility of damage to the battery &/or sensitive electronic components on the motorcycle.

Simple two-wire connection & a compact size (about 2” x 3/4” x 3/16”) make installation a breeze. A daylight sensor automatically adjusts the brightness of the L.E.D.’s.

4219 L.E.D. Battery Gauge, Chrome (ea) $39.99

4218 L.E.D. Battery Gauge, Black (ea) $39.99


HA

ND

LE

BA

RS

Wide

U.S. Patent 4,875,386

The CrampBuster provides a way for comfortable throttle control & dramatically reduces the wrist fatigue often caused by long

rides. The CrampBuster will rotate forward all day long. Yet when downward pressure is applied by your

hand, the throttle is regulated effortlessly & accurately — without squeezing.

6258 Fits: H-D & other motorcycles with 1” bars (ea)

$10.99

6259 Fits: Motorcycles with 7/8” bars (ea) $10.99

6254 Fits: H-D & other motorcycles with 1” bars (ea) $10.99

6257 Fits: Motorcycles with 7/8” bars (ea) $10.99

Note: Use 6258 & 6254 on grips with 1-7/16” to 1-3/4” outside diameter. Use 6259 & 6257 on grips with 1-1/8” to 1-3/8” outside diameter.

Narrow

Give your wrist a rest. This push button Electro-Magnetic Cruise Assist is just the ticket. Just push a button to set… push the button again, touch the brakes, or pull in the clutch (on ‘07-’10 Models) to cancel. Magnetic force holds throttle position steady, but is still easy to over-ride as necessary.

Fits: ’96-‘10 H-D Models (except ‘04-’10 XL, ‘08-’10 Electra Glides, Road Kings, Road Glides, Street

Glides, & Trikes or any Models equipped with Hydraulic Clutch)

6280 Electro-Magnetic Cruise Assist (ea)

$219.99

Note: Not compatible with Switch Housing Covers (P/N’s 7809, 7827, 7828).

389

Takes the place of the factory fork stem bolt cap

Fits ‘91-’10 Softails (except Springer Models), ’93-’05 Dyna Wide Glide, & all ’06-‘10 Dyna Models

6048 Fork Stem Clock, Black (ea) $69.99

Infinite places to mount – use included double sided tape or use the mounting hole to screw in place

Includes 1/4”-20 screw for Road King tank panel

Great for windshield & handlebar bag installation

6044 TOCS Clock, Black (ea) $39.99

6046 TOCS Thermometer, Black (ea) $39.99

Flip-top head opens for access to fork lock mechanism

No key modification required, easy installation

Keeps “lock/unlock” wording under the unit

Fits all ’94-’10 Road King Models

6040 Fork Lock Flip Clock for Road King, Black (ea)

$94.99

Mounts to 1” or 7/8” bars (clear plastic isolator included for 7/8” applications)

Split ring mount for easy installation

Clock head rotates & swivels to adjust to any position

6028 Handlebar Mount Clock, Black (ea) $69.99

6029 Handlebar Mount Clock, Electroluminescent (ea)

$84.99

6030 Handlebar Mount Thermometer, Black (ea)

$69.99

6031 Handlebar Mount Thermometer, White (ea)

$69.99

Attaches to the upper or lower bolt of the brake or clutch assembly – fits H-D & most Metric bikes (may require a spacer)

Great for windshields or any location with 1/4” (or 6mm) screw

Head swivels for fine tuning position & then locks in place when tightened. Clock or thermometer face can be rotated in the housing.

6032 B/C Clock, Black (ea) $44.99

6033 B/C Clock, Electroluminescent (ea)

$59.99

6034 B/C Thermometer, Black (ea) $44.99

6035 B/C Thermometer, White (ea) $44.99

Split mount for easy installation

Requires 2” of straight handlebar for installation (recommended 3”

from bends)

6036 Bullet Billet Clock for 1” or 7/8” Bars, Black (ea)

$69.99

6037 Bullet Billet Clock for 1” or 7/8” Bars, Electroluminescent (ea)

$84.99

6039 Bullet Billet Clock for 1-1/4” Bars, Electroluminescent (ea)

$104.99

6038 Bullet Billet Thermometer for 1” or 7/8” Bars, Black (ea)

$69.99

6041 Bullet Billet Thermometer for 1” or 7/8” Bars, White (ea)

$69.99

Mounts to 1” or 7/8” bars Non-marking, soft tipped hidden set screw

6052 Talon Clock, Black (ea) $49.99

6053 Talon Clock, Electroluminescent (ea) $64.99

6054 Talon Thermometer, Black (ea) $49.99

6055 Talon Thermometer, White (ea) $49.99

Add this pristine 3” bullet tachometer to your bike & gain accurate engine performance & style! Choose between the White Face with 7 Color L.E.D.

Lighting Tachometer or the Black Face Tachometer with backlighting. With 0-8,000 RPM range this tachometer

is designed specifically for motorcycles to eliminate tach bounce. Includes everything you need for a swift &

easy installation.

Fits: 1” bars (works with both single & dual fire ignition)

388 3” Bullet Tachometer, Black Face (kit)

$199.99

389 3” Bullet Tachometer, 7-Color L.E.D. Face (kit)

$219.99

Note: Tachometers are 3” in diameter & are 3.5” long.

>>We’re impressed by these premium-quality clocks & thermometers from Marlin’s Genuine Accessories. Marlin’s products are water proof, shock resistant, & housed in beautiful show chromed mounts to cover almost any application. His super-sized clock dials have oversized numbers & glow-in-the-dark features for easy reading. All clocks have replaceable batteries & include a handy tool to make the job easy. All these features plus Marlin’s “Bet ‘ur Ass Guarantee” make these products the clear choice.


389

388

388

Bring your beverage with you on those hot or cold days! Mount your drink holder either on your handlebars or your clutch or brake perch mounts. The quick detach thumb screw mount leaves a simple clamp when not in use. Choose either the Universal Basket Holder or Stainless Mug with Mounting Ring to hold your beverage.

1422 Fits: 1” Bars (ea) $59.99

1475 Fits: 1-1/4” Bars (ea) $59.99

1462 Fits: All ‘82-’10 H-D Model Clutch or Brake Perch Mounts (ea)

$59.99

1429 Replacement Basket for Drink Holder (ea)

$20.99

1464 Fits: 1” Bars (ea) $59.99

1477 Fits: 1-1/4” Bars (ea) $59.99

1463 Fits: All ‘82-’10 H-D Model Clutch or Brake Perch Mounts (ea)

$59.99

1469 Replacement Stainless Steel Küryakyn Travel Mug (ea)

$17.99

Note: Universal Basket Holder accepts most average sized cups, cans, bottles & mugs with a 2” to 3 1/2”diameter.

1486


HA

ND

LE

BA

RS

C h e c k I t O u t . . .

Upgrade your existing Drink Ring to accept cups, cans or bottles so you

can stay hydrated on the road! See Pg 5

P/N 1459

1463

Stainless Steel Mug Shown

1422

Basket Shown

1487

Patent Pending

Even if you’re wearing a full set of leathers you still shouldn’t ride with a cup of hot coffee between your legs. These affordable drink holders mount

on either the clutch or brake perch mounts or a 1” bar. With secure snap-on mounting, simply Snap-N-Go to install or remove. When removed it leaves an unobtrusive stud on your perch or a small clamp & stud for universal bar application. Select the drink holder style you desire & ride with the plush comforts you deserve.

Fits: All ’82-’10 H-D Models (Includes 1" Bar Mount & Perch Mount)

1486 Snap-N-Go with Stainless Steel Mug (ea) $39.99

1487 Snap-N-Go with Universal Basket (ea) $39.99

1469 Replacement Stainless Steel Küryakyn Travel Mug (ea) $17.99

Note: P/N 1487 accepts beverage containers from 2-3/8” to 3-1/2” in diameter. Clutch Perch & 1" Bar Clamp Mount included

Attach your cell phone, MP3 player & almost any portable device directly to your handlebars using this mount. The quick detach mounting plate leaves a simple clamp when it is not in use.

Standard 4-hole AMPS pattern

Includes hook-&-loop straps

Accepts most belt clips

1421 Fits: 1” Handlebars (ea) $49.99

1474 Fits: 1-1/4” Handlebars (ea) $49.99

1461 Fits: ‘82-’08 H-D Model Clutch or Brake Perch Mounts (ea)

$59.99

1473 Fits: ‘82-’10 H-D Model Clutch or Brake Perch Mounts (ea)

$59.99

These two-piece clamps provide a simple, secure & clean method for mounting most of your modern-day conveniences. Replacement Mount for The Sound of Chrome Speakers, Handlebar Electrical Power Point, Universal Drink Holders, Universal Handlebar Accessory Mounts, & any style of Küryakyn Mirrors.

1420 Fits: 1” Bars (ea) $11.99

1468 Fits: 1-1/4” Bars (ea) $18.99

1415 Fits: 3/4”, 5/8”, & 1/2” Bars (ea) $16.99

5/16”

13/16”

1/2”

1420

1461

1421

1421


1!1/2”

1!3/16”

1483

Perfect for plugging in your cell phone, iPod, GPS, air pump, or any other electrical device taken on the road. This power point/cigarette lighter will keep them charged. Built into our Silver Bullet light housing & comes with everything you need to connect directly to your battery with a quick disconnect. Mount it above your handlebars or check for tank clearance & mount it below.

1423 Fits: 1” Handlebars (ea) $69.99

1476 Fits: 1-1/4” Handlebars (ea) $69.99

1483 Fits: All ’82-’10 H-D Model Clutch or Brake Perch Mounts (ea)

$69.99

Everybody has things they need to carry; keys, cell phones & iPods. Empty your pockets & make transporting these items easy with our new Accessory Pouch. Designed specifically with a quick detach strap for your motorcycle handlebars, your items will be easily accessible at the tip of your fingers. Simply strap & go or remove it in seconds & leave your bars clean.

Fits: Universal for 3/4” to 1-3/4” Bars (Also bolts directly to Universal Handlebar Accessory Mounts [pg 70])

1478 Small (3-1/2” Tall, 2-1/4” Wide, 3/4” Deep) (ea) $29.99

1479 Large (4-1/2” Tall, 3-1/4” Wide, 3/4” Deep) (ea) Note: Holds standard 3-1/2" x 3" E-Z pass.

$29.99

This system rocks! The 2nd Generation looks, performs, & rocks even better! No compromise here with the perfectly designed 3” main speakers with additional tweeters for full bodied sound. The weatherproof bullet housing has powerful built-in true 50 watt amplifier & includes a volume & on/off control switch. Convenient swivel adjustment gives you the freedom to position speakers in any direction you choose. With a full plug & play wiring harness, noise purifier & standard 3.5 mm jack, simply connect your iPod, MP3 player, satellite radio, personal CD player, etc. & ride on.

851 Fits: 1-1/4” Handlebars (set) $399.99

852 Fits: 1” Handlebars (set) $399.99

Note: Not suggested for use with FM/AM radios.

3-3/8" Diameter 4-1/4" Long

1423

1478

1479


HA

ND

LE

BA

RS


Have a GPS? Our new pouch accommodates virtually any GPS & mounts in seconds! See Pg 6

P/N 4195

3-1/4”

4-1/2”

2-1/4”

3-1/2”


Brake away from the ordinary & clutch the gaze of onlookers with Küryakyn Zombie Levers. Comfortable contours & a dished back allow high leverage with minimal reach; a gripping addition to this popular collection.

1047 Fits: ’96-’10 H-D Models with Cable Operated Clutch (except ’04-’10 Sportsters & ’08-’10 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes) (pr)

$89.99

1058 Fits: ’08-’10 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes with Cable Operated Clutch (pr)

$89.99

1060 Fits: ‘04-’10 Sportsters (pr) $89.99

1492 Replacement Zombie Medallions (pr) $14.99

Note: When P/N 1047 is installed on a ’08-’10 Softail or Dyna the brake lever will be positioned approximately 3/8” further from the bar than the stock lever.

These are the finest levers on the market today. You see, your forefinger is your strongest finger, but other levers won’t let your strongest fingers work. Our levers allow the forefinger to get a real grip, making it much more comfortable & easier to pull the lever. Add to that the dished out backside of the levers, which Barnett invented twenty-some years ago, & you’ve got the best set of levers you’ll ever own. Your hands just fall naturally into place. If you’ve got small hands, these are a must.

1021 Fits: ’82-’95 H-D Models (pr) $62.99


$62.99


$62.99

Note: When P/N 1029 is installed on an ’08-’10 Softail or Dyna, the brake lever will be positioned approximately 3/8” farther from the bar than the stock lever.



A MUST-HAVE with our Zombie Levers! To give you the nastiest look possible. Be BAD! See Pg 78

P/N 1450

Iron Braid levers offer timeless style & enhance grip at the same time. The patented braiding process ensures the leather lays flat against the lever & will not loosen over time.

Fits: ’96-’10 H-D Models with Cable Operated Clutch (except ’04-’10 Sportsters & ’08-’10 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes)

21524 Black & Black (pr) $119.99

21534 Black & Red (pr) $119.99

21544 Black & Blue (pr) $119.99

21754 Black & Black (pr) $119.99

21523 Black & Black (pr) $119.99

21533 Black & Red (pr) $119.99

21543 Black & Blue (pr) $119.99

21753 Black & Black (pr) $119.99


HA

ND

LE

BA

RS

1024

1055

Boss Blades are a stunning addition to our line of custom levers. Their wide, deeply dished blades greet your fingers with the shortest reach possible while still allowing the necessary range of motion.

1036 Fits: ‘99-’06 Twin Cams with H-D’s Hydraulic Clutch & ‘02-’05 V-Rod (pr) $62.99


$62.99


$62.99



As tasteful as an Oscar, this beautifully sculpted set of levers adds a really unique accent to any bike. They are also very comfortable on the hands.

1024 Fits: ’82-’95 H-D Models (pr) $69.99

1019 Fits: ‘99-’06 Twin Cams with H-D’s Hydraulic Clutch & ‘02-’05 V-Rod (pr) $79.99


$79.99


$79.99


7809

The nice thing about chrome handlebar accents is that you, the rider, can enjoy them every time you’re in the saddle. You’ll

especially like these Chrome Switch Housing Covers because installation is so easy-They go on right over the stock switch assemblies! No disassembly & no fumbling with tiny, easy to lose parts! Best of all, since they’re made for use with our Chrome Handlebar Dress-up Kits, you’ll enjoy the spectacular view of a tricked out set of bars mile after mile!

7809 Fits: ’96-’03 XL; ’96-’10 Dyna, Softail, & FLHR (except ’03 FXSTDSE & ’03 FLHRSE)

$72.99

7827 Fits: Following Models WITHOUT Cruise: ’96-’10 FLHTC, ’06-’10 FLHX, ’10 FLTRX, ’96-’09 FLHT

$72.99

7828 Fits: ’96-’10 FLHTCU, ’10 FLHTK, ’98-’09 FLTR, ’02-’10 FLHRC, Will Also Fit the Following Models WITH Cruise: ’02-’10 FLHTC, ’06-’10 FLHX, ’10 FLTRX, ’02-’09 FLHT

$79.99

Note: Motorcycle must be equipped with Küryakyn Handlebar Control Dress-up Kits (P/N 9119 or 9126) or H-D Handlebar Reservoir Cover Sets (H-D P/N's 46099-98 or 46098-98).

Here’s a classy replacement for the rubber bellows-type cover found on late model clutch cables. Unlike previous covers of this type, this cover uses much larger, easier to handle spring clips. Installation is simplified & the final fit is much improved.

Fits: All ’87-’10 H-D Models with stock cables & most steel braided cables 0.355” in diameter or less

2017 Chrome Clutch Cable Adjuster Cover (ea)

$41.99

2023 Replacement Spring Clips (pr) $2.99


1742

7806

7808

7807

7827

7828

Whether this is the first piece or the last piece you’re adding to chrome your hand controls, this is a must-have with its smooth lines. These housings will accept stock ’96-‘10 H-D switches.

Add our Handlebar Control Dress-up Kit that includes everything else you need to complete your family of chrome hand controls.

7806 Fits the Following Models WITHOUT Cruise: ’96-’10 FLHTC, ’06-’10 FLHX, ’10 FLTRX, ’96-’09 FLHT, ’10 FLHXXX

$72.99

1742 Fits the Following Models WITH Cruise: ’02-’10 FLHTC, ’06-’10 FLHX, ’10 FLTRX, ’02-’09 FLHT, ’10 FLHXXX

$72.99

7807 Fits: ’96-’10 FLHTCU, ’10 FLHTK, ’98-’09 FLTR, ’02-’10 FLHRC, ’09-’10 FLHTCUTG Note: Will also fit ’02-’10 FLHR if equipped with Cruise.

$72.99

7808 Fits: ’96-’10 VRSC, XL, Dyna, Softail, & FLHR (except ’03 FXSTDSE & ’03 FLHRSE)

$72.99

It’s time to finish the job with our Chrome Throttle & Idle Cable Covers. Quick & easy Installation - Requires no disassembly of your controls or cables.

Fits: All ’82-’10 Models with 90 degree cable elbows

2027 Chrome Throttle & Idle Cable Covers (set)

$39.99

1740

®

New curve design provides a sleek, ergonomic look with better coverage of the OEM signal button. Makes turn signal actuation simple for riders – even while manipulating clutch or brake controls. Simple peel-&-stick installation.

Fits: All ’96-’10 H-D Models

6193 Black Thumbnail Curve (pr) $13.99

6194 Chrome Thumbnail Curve (pr) $16.99

Note: Not compatible with Küryakyn Switch Housing Covers (P/N’s 7809, 7827, 7828).

An inexpensive, fast, & easy way to completely finish chroming your hand controls! The Clutch Perch is a complete chrome replacement unit that has been beefed up to complement the brawny look of an H-D. The Master Cylinder Cover dresses up the reservoir & covers the entire visible hand brake bracket assembly with a lush layer of glistening chrome. There are even replacement chrome clamp halves & hardware accents for a 100% detailed, pure custom look.

1740 Fits: ’08-’10 Electra Glides, Road Glides, Street Glides, & Road Kings (set) Patent Pending

$79.99

1741 Fits: ’04-’10 Sportsters (set) Patent Pending

$79.99

9119 Fits: Dual Disc-’96-’07 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings, ’96-’10 Dynas, ’96-’03 Sportsters (set)

$79.99

9126 Fits: Single Disc-’96-’10 Softails & Dynas, ’96-’03 Sportsters (set)

$79.99

Get rid of that rusted, oxidized clutch cable ferrule & banjo bolt.

2012 Clutch Cable Ferrule Cover (ea) Fits: ‘84-’10 H-D clutch cables

$15.99

2014 Banjo Bolt Cover (ea) Fits: ‘84-’10 H-D master cylinder & calipers (except ‘08-’10 Touring master cylinder & caliper, ‘08-’10 Softail & Dyna calipers & ‘04-’10 XL master cylinder & caliper)

$15.99

2016 Clutch Cable Ferrule Cover & Banjo Bolt Cover Combo (set) Fits: ‘84-’10 H-D Models with stock master cylinder & calipers (except ‘02-’10 V-Rod, ‘04-’10 XL, ‘08-'10 Touring & any Models with hydraulic clutch)

$25.99

2014

2012

2012


HA

ND

LE

BA

RS

new

new

new

5"2-5/8"

These state of the art custom mirrors are cut from the same mold as our Turn Signal Mirrors, but they do not have the running light & turn signal functions. Available with flat or convex glass & feature an oversized swivel ball for superior locking ability. Hardware for a variety of H-D mounting applications is included.

1437 Ellipse Mirrors with Flat Glass (pr) $103.99

1438 Ellipse Mirrors with Convex Glass (pr) $103.99

1433 Replacement Flat Glass with Bezel (ea) $25.99

1436 Replacement Convex Glass with Bezel (ea) $31.99

Note: Not recommended for Buckhorn handlebars or’04-’10 XL Models.

Convex lenses reduce actual image but give you a wider field of vision & reduce the effects of vibration. Vehicles behind you are closer than they appear.

For your chopper lifestyle we have finely crafted these Maltese Cross design mirrors. The flat glass is surrounded by a heavy, protruding bezel & accented by a knurled edge for a complete outlaw look. Scalloped mirror arms extend from the bars with a swoop & are capped off by a stiletto styled end. The bezel is easily removed to access & adjust the tension mechanism if necessary. Hardware for a variety of H-D mounting applications is included.

1425 Maltese Cross Mirrors (pr) $103.99 Note: Not recommended for Buckhorn handlebars.

1449


1448D o n ' t M i s s T h i s . . .

Featuring a beefy 3-bar mirror stem & sleek oval heads, no other mirrors compare! See Pg 6

P/N 1495

Dare to slice through the wind with the finest example of cutting edge mirrors. The Scythe & Scythe II Mirrors feature a Rambo Knife shaped mirror head that provides a sleek streamlined profile with smooth operating swivels for easy adjustment. All mounting hardware included.

1449 Scythe Mirrors (pr) $139.99

1448 Scythe II Mirrors (pr) $139.99

Note: Not recommended for Buckhorn handlebars.

5!1/2”

4!3/8”

Magnum Plus Stems

3!9/16”

3!15/16”

Standard MagnumStems1400 Magnum Plus Stem

(Right or Left) (ea)$25.99

1401 Standard Magnum Stem (Right) (ea)

$20.99

1402 Standard Magnum Stem (Left) (ea)

$20.99

1428

1430

We call them Magnum because of their rugged & beefed up looks. Featuring sturdy stems & an oversized adjuster ball. Available in two head sizes. Hardware for a variety of H-D mounting applications is included.

1428 Small Head - Standard Stem (pr) $95.99

1430 Large Head - Standard Stem (pr) $95.99

Note: Not recommended for Buckhorn handlebars or ’04-’10 XL Models.

5-1/2"3"

5"2-5/8"

All bikers agree—other motorists need to know when you’re turning. Whether you’re changing

lanes or turning onto a cross street, these super-bright L.E.D. Turn Signal Mirrors show everyone your intentions. They work as running lights, too, so even when you’re just going straight the world knows you’re there. Available with your choice of regular or reduced-image

convex glass, a locking swivel ball to keep them positioned where you want them, & L.E.D.’s that

last way longer than stock incandescent bulbs. Hardware for a variety of H-D mounting applications & the necessary load equalizer is included.

1431 Turn Signal Mirrors with Flat Glass (pr)

$189.99

1432 Turn Signal Mirrors with Convex Glass (pr)

$189.99

1433 Replacement Flat Glass with Bezel (ea)

$25.99

1436 Replacement Convex Glass with Bezel (ea)

$31.99

Note: Not recommended for Buckhorn handlebars or ’04-’10 XL Models. May be in violation of FMVSS #108.

Magnum Plus Mirrors position the mirror head out-ward 2” farther than our Magnum Mirrors. Available with flat glass or convex glass. Hardware for a variety of H-D mounting applications is included. Note: Not recommended for Buckhorn handlebars or ’04-’10 XL Models.

1412 Fits Right or Left (ea) $51.99




5"2-5/8"

5-1/2"3"

1412

1410

1417 Small Head with Flat Glass (ea) $31.99

1418 Large Head with Flat Glass (ea) $31.99

1406 Small Head with Convex Glass (ea) $31.99

1407 Large Head with Convex Glass (ea) $31.99

5"2-5/8"


HA

ND

LE

BA

RS

We’ve taken your run-of-the-mill skull & added 35% more angst & 20% more anguish to make these the nastiest mirrors on the street. Overall, the mirror head is about 3” x 4” with round glass 3” in diameter. The smoothly arched stem positions the center of the mirror head about 4-3/8” above & 5-1/2” outboard of the mounting point on the handlebar control. Hardware for a variety of H-D mounting applications is included.

1450 Zombie Mirrors (pr) $149.99

1451 Replacement Knurled Screws (ea)

$9.99


Alert drivers around you of your intention to move! These classy mirrors have an L.E.D. Amber turn signal directed to the side to get the attention of those drivers in your blind spot. The flat glass has a beveled edge & a sculpted mirror head that moves like silk in a ball & socket mechanism. Hardware for a variety of H-D applications is included.

1435 Blind Spot Turn Signal Mirrors (pr) $189.99

1457 Blind Spot Turn Signal Mirror Heads Only (pr) Note: These heads are intended for use on our Windshield Mount (P/N 1454 -pg 79) but can also be installed on other Küryakyn stems listed on pg 77.

$135.99


Note: Adapters are available to install Küryakyn Mirrors on just about any bike.

1445 For Honda, Kawasaki, Suzuki, Victory (pr)

$10.99

1446 For Yamaha Cruisers (pr) $10.99


1439

Why keep your mirrors camouflaged within your fairing? Add our Mirror Caps & highlight those great lines by adding a sparkle of chrome in an unexpected location. Also available with built-in amber auxiliary turn signals using simple plug-in connections to add that extra visibility to other drivers on the road.

Fits: ‘06-’10 Street Glides, '10 Street Glide Trikes & any ’91-’10 Electra Glide equipped with H-D P/N 91945-98B

1427 Mirror Caps for Street Glide (pr) $69.99

1439 Lighted Mirror Caps for Street Glide (pr) $129.99

The old catch 22. You’ve removed the stock mirrors from your Street Glide in favor of more unique & stylized mirrors, but now the stock mounting holes are still there, staring you right in the face! Inner Fairing Cover Plates replace any trace of the stock mirrors with cool chrome accents styled to blend right in. High strength peel & stick adhesive makes installation a snap.

Fits: ’06-’10 Street Glides & '10 Street Glide Trikes

3767 Inner Fairing Cover Plate for Street Glide (pr) $29.99

Utilizing our Blind Spot Turn Signal Mirror head with a cleverly designed mount, Küryakyn offers you an awesome combination of looks & function. The mirror heads & mounts are beautifully chromed & provide excellent rearward visibility. Amber L.E.D.’s in the outer edge of the mirror function as auxiliary turn signals & plug into the stock wiring harness.

Fits: ’06-’10 Street Glides, ’10 Street Glide Trikes, ’96-’10 Electra Glides, & ’09-’10 Tri GlidesNote: Installation on Electra Glides &Tri Glides requires drilling mounting holes. A convenient template & all hardware included.

1456 Blind Spot Turn Signal Mirrors (pr) $199.99

Wipe your bars clean with our innovative Windshield Mounted Mirrors. Sleek design blends a classy chrome windshield accent strip with gracefully curved arms to support the mirror heads. Our convex glass Turn Signal or Ellipse Mirror heads are positioned just above the upper edge of the fairing to provide great rearward visibility. Choose Turn Signal Mirror heads & you’ll add auxiliary forward facing running & turn signals.


1452 Windshield Mounted Turn Signal Mirrors (set)

$270.99

1453 Windshield Mounted Ellipse Mirrors (set)

$189.99

1454 Windshield Mount Only for Mirrors (ea)

$129.99

1455 Replacement Snap Caps (set/3) $9.99

Note: P/N 1454 allows installation of Blind Spot Turn Signal Mirror Heads (P/N 1457 - pg 78), any Magnum Mirror Heads (pg 77), or any mirror you may have with a 1/4”-20 threaded stud.


HA

ND

LE

BA

RS

1427

1452

1453

W h e n i n s t a l l i n g a f t e r - m a r k e t r i s e r s , h a n d l e b a r s , o r b o t h ;

k e e p i n m i n d t h a t l o n g e r c l u t c h c a b l e s , b r a k e l i n e

& t h r o t t l e c a b l e s m a y b e n e e d e d .

These risers are 6-1⁄2” tall & full of meaty chrome plated steel - enough to satisfy the greatest hunger. Comes with individual heavy-duty top clamps for a complete customized look.

Fits: ‘00-’07 Deuce with 1” diameter bars

1725 Smooth Style Pullback Risers (pr)

$79.99

The finest, most effective pullback riser on the market! Provides immediate relief to those stretching to reach their handlebars. Relocates handlebar closer to the rider so the motorcycle becomes easier to steer & control while relieving shoulder, neck & back pain. Each riser features a triple-plated, bright chrome finish & has its own individual stylish cap that allows mounting of a tachometer or other accessory between the risers. Offering 4” of rise & 1 !” of pullback, these risers work with stock lines & cables on 1" handlebars. Easy to install, each kit includes instructions.

1735 Fits: Dynas, Softails & Sportsters (pr)

$119.99

Important: Riser applications only work with OEM handlebars that have separate risers. Motorcycles with risers welded to handlebars will require new handlebars for installation.

1710 16” (End Rise 16”- Width 39-1/2”) (ea)

$199.99

1711 12-1/2” (End Rise 12-1/2”- Width 38-1/2”) (ea)

$171.99


1-1/4”Diameter

1-1/2”Diameter

Burly & Big’uns T-Bars offer excellent quality at an affordable price. The bars are drilled for

hidden wiring & accept stock H-D as well as most aftermarket controls.

1-1/4” Diameters

1719 7” rise – 31” width (ea) $219.99

1720 9” rise – 31” width (ea) $219.99

1701 8” rise – 30-1/2” width (ea) $166.99

1700 10” rise – 30-1/2” width (ea) $166.99

Footpegs

Mounts & Extensions

Floorboards

Highway/Cruise Pegs & Mounts

Clamps & Mounts

Engine Guards

Passenger Comfort

4-5/8”

1-1/4”

® P/N 8000 pg 88

4-1/2”

1-1/4”

6-1/4”

P/N 4445 pg 90

2-1/2”

4-7/8”

1-1/2”

® P/N 8002 pg 88

4-1/2”

1-1/4”

® P/N 8028 pg 88

2-1/2”

4-1/2”

7/8”

P/N 4430 pg 87

5-1/4”P/N 4463 pg 83

1-3/4”

4-3/8”

5”

1!1/8”

® P/N 4450 pg 88

5”

5-1/2”

1”

1-1/4”

1”

P/N 4475 pg 86

5-1/2”P/N 4460 pg 86

1-5/8”

2-1/4”

4-3/4”

7/8”

2-1/2”

P/N 4425 pg 87

4-15/16”

3-1/16”

® P/N 4491 pg 84

6”

1-1/2”

1-7/8”

P/N 4595 pg 84

5”

1-13/16”

3”

P/N 4470 pg 85P/N 4416 pg 83

5-5/8”

1-3/4”

2-13/16”

1-13/16”

5-7/8”

1-3/4”

7-1/2”

5-1/4”

1-1/2”

1-3/4”

P/N 4400 pg 87

5-1/2”

1-13/16”

4-13/16”

P/N 4466 pg 99

7”

9-7/8”

P/N 4411 pg 83


P/N 7521 pg 85

4-1/4”

1-1/4”

1-1/8”

have always fascinated man. What do bikers stand around at night? A firepit. So keep the fire blazin’ with these hot Flamin’ Pegs & Pads! No matter where you’re headed, they’ll get you there in style. They’re tough, die cast, chrome-plated, & the rubber components aren’t glued on—they’re physically fastened into place. Check out our Flame Windshield on page 188 for a complete inferno.


4416 Flamin’ Pegs, Male Mount (pr) $103.99

4413 Flamin’ Peg Replacement Rubbers Pads (4 pieces)

$19.99

4490 Replacement “Curb Feelers” (pr) $10.99

4418 Flamin’ Shift Peg (ea) $25.99


FO

OT

RE

ST

S

P/N 1064


®

Start a fire! Create a super hot look by combining our blazin’ pegs & shift linkage!See Pg 109

7518

7519

®

Simple & stylish, add the sleek lines of the ISO-SweptWing Peg to streamline your bike & get ready for flight. Traditional ISO style blended with reduced vibration design creates a one-of-a-kind footpeg.

Add them solo or coordinate them as a matched set to Küryakyn’s SwingWing Peg (pg 99).

4463 ISO-SweptWing Peg, Male Mount (pr) $79.99

4469 ISO-SweptWing Peg Replacement Rubber Pads (set)

$17.99

U.S. Patent 6,893,038 & D593,911

4411 Flamin’ Switchblade Footpeg, Male Mount (pr) $155.99

4413 Flamin’ Switchblade Replacement Rubber Pads (4 pieces)

$19.99

4490 Replacement Curb Feelers (pr) $10.99

Note: Flip out arm designed to be a heel rest.

7518 Fits: All Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes, & all FLST Models (ea)

$39.99

7519 Fits: All FXST Models, all ’08-’10 Rocker Models, ’93-’10 Dyna Wide Glides, ’08-’10 Dyna Fat Bob with Forward Controls, & all Küryakyn Forward Controls (ea)

$39.99

family is getting bigger! A shift peg, brake pedal pads & stirrup heel rests have crawled out of the shadows in the Küryakyn R&D Department. Their wicked, spider themed designs look awesome by themselves or with the rest of our Widow accessories.

®

4491 Widow Pegs, Male Mount (pr) $103.99

4474 Replacement “Curb Feelers” (set/4) $16.99

4493 Widow Peg Replacement Rubber Pads (set) $13.99

®

4423 Widow Pegs & Stirrups, Male Mount (pr) $166.99

4424 Widow Stirrups without Pegs, Male Mount (pr) Not Shown

$103.99

®

7533 Fits: All Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Tikes, & all FLST Models (ea)

$36.99


$36.994423

4494

tyranny of mundane pegs with Küryakyn Liberator Pegs! Barrel-shaped chrome bodies & perforated rubber pads, these pegs are ready to defend freedom everywhere.


4595

4593

®

4494 Widow Shift Peg (ea) $25.99

®

4595 Liberator Pegs, Male Mount (pr) Note: Includes Ammo Pin Mounting Hardware.

$124.99

4591 Liberator Peg Replacement Rubber Pads (set) $16.99

4592 Ammo Pin Peg Mounting Hardware (kit) $20.99

®

4597 Liberator Pegs & Stirrups, Male Mount (pr) Note: Includes Ammo Pin Mounting Hardware.

$176.99

4599 Liberator Stirrups without Pegs or Adapters (pr) $99.99

7533 7534Renderings Shown

®

4593 Liberator Shift Peg (ea) $25.99

4580 Liberator Shift Peg or Stirrup Replacement Rubber Pad (ea)

$8.99

®


$39.99

4589 Liberator Brake Pedal Pad Replacement Rubber Pad (set)

$8.99

are taking over! Unique style & durability make these pegs, brake pedal pads, & shift peg a stunning addition to your bike. All feature beautiful chrome with durable rubber pads & our ominous Zombie skull. To make a wicked thing even better, Küryakyn offers many other Zombie accessories so you can carry this theme throughout your bike.

4470 Zombie Pegs, Male Mount (pr) $103.99

4472 Zombie Peg Replacement Rubber Pads (set) $11.99

4474 Replacement “Curb Feelers” (set/4) $16.99

4473 Replacement Skull Emblem (ea) $14.99

4406 Fits: All Electra Glides, Road Glides, Trikes, Street Glides, Tour Glides, Road Kings, & all FLST Models (ea)

$39.99


$39.99

4414 Zombie Shift Peg (ea)

$25.99

4406

4406

4405


FO

OT

RE

ST

SP/N 6295


Spread the evil! You’ve got the pegs & brake pedal pads - don’t think about turning that key until

you’ve got the grips! See Pg 62

Purely evil without the heavy peg look! These mini Zombie style pegs are 1” wide by 3-1/2” long & are great for keeping cruise, driver, or passenger pegs minimal. The inner scallop provides excellent support for highway pegs when you throw your foot over the top.

7521 Mini Dagger Pegs, Male Mount (pr) $79.99

7512 Mini Dagger Peg Replacement Rubber Pads (set) $16.99

1492 Replacement Zombie Medallions (pr) $14.99

4489

4484

4484

To easily put a slightly more subdued look on your Stiletto Pegs, we offer these optional Domed End Caps. They’ll give your pegs an entirely new look!

4482 Domed End Cap for Stiletto Shift Peg (ea)

$7.99

4483 Domed End Caps for Stiletto Stirrups (pr)

$11.99

4484 Domed End Caps for Stiletto Pegs (pr)

$12.99

4489 Domed End Caps for Stiletto Brake Pedal Pad (pr)

$11.99


These are the ultimate chopper footpeg. From the Maltese Cross insert to the spire pointed end, these pegs are old-school custom. Like all Küryakyn pegs, the ends are interchangeable so our extensions or female ends are quickly & easily changed.

4460 Kaiser Pegs, Male Mount (pr) $103.99

4465 Kaiser Peg Replacement Rubber Pads (set)

$13.99


4462 Replacement Maltese Cross Emblem (ea)

$13.99

4479

4480

4475


4477

4480

The radical Stiletto Peg is designed for those who ride on the wild side. The line includes everything you need to makeover your foot controls.

4475 Stiletto Pegs, Male Mount (pr) $103.99

4479 Stiletto Shift Peg (ea) $28.99

4480 Stiletto Brake Pedal Pad (ea) Fits: All FXST Models, all ’08-’10 Rocker Models, ’93-’10 Dyna Wide Glides, ’08-’10 Dyna Fat Bob with Forward Controls, & all Küryakyn Forward Controls

$31.99

4477 Stiletto Stirrups with Pegs (pr) $176.99

4485 Stiletto Peg Replacement Rubber Pads (set) $14.99

4486 Stiletto Stirrups Replacement Rubber Pads (set)

$11.99

4487 Stiletto Shift Pegs Replacement Rubber Pads (set)

$6.99

4488 Stiletto Brake Pad Replacement Rubber Pads (pr)

$7.99


Our superbly designed stirrup arm, with its smooth radius & built-in heel guard, prevents melting the heel of your boot on the front pipe when resting your weary ridin’ feet.

4428 Pilot Pegs with Stirrups, Male Mount (pr) $135.99

Küryakyn Retro Stirrups combine the comfort of the classic ISO-Stirrup with the style of the Retro Peg.

4420 Retro Pegs with Stirrups, Male Mount (pr) $103.99

Küryakyn Retro Pegs combine the comfort of the classic ISO-Pegs with modern, updated styling. The same vibration-absorbing material is used for a stylized, sleek tread. The body of the peg has a trim profile that will blend well with everything from a fully decked-out land yacht to the wildest pro-streeter.

Most of the interchangeable mounts & options available for the ISO-Pegs will also work with the Retro Pegs.

4400 Retro Pegs, Male Mount (pr) $72.99

4404 Retro Shift Peg (ea) $19.99

4403 Retro Brake Pedal Pad (ea) Fits: All FXST Models, all ’08-’10 Rocker Models, ’93-’10 Dyna Wide Glides, ’08-’10 Dyna Fat Bob with Forward Controls, & all Küryakyn Forward Controls

$31.99

4410 Retro Heel Pads for ISO-Stirrups (pr) $9.99

4407 Retro Brake Pedal Pad (2 pieces) $10.99

4408 Retro Footpegs (4 pieces) $14.99

4409 Retro Shift Peg (2 pieces) $8.99

With Pilot Pegs you get the same versatility as with the ISO & Retro Pegs. Our wide variety of extensions, clamps, & accessories provide endless possibilities for peg location & application. A transforming full-coverage brake pedal pad completes the set.

4425 Pilot Pegs, Male Mount (pr) $72.99

4426 Pilot Shift Peg (ea) $19.99

4429 Pilot Brake Pedal Pad (ea) Fits: All FXST Models, all ’08-’10 Rocker Models, ’93-’10 Dyna Wide Glides, ’08-’10 Dyna Fat Bob with Forward Controls, & all Küryakyn Forward Controls

$31.99

4430 Mini Pilot Peg, Male Mount (pr) $39.99

4431 Pilot Peg (8 pieces) $15.99

4432 Pilot Stirrups or Shift Peg (2 pieces) $9.99

4433 Pilot Brake Pedal Pad (3 pieces) $10.99

4434 Mini Pilot Peg (2 pieces) $10.99


FO

OT

RE

ST

S

4429

4430

4426

4425

4428

44044400

4420

4403

8001

®

The ISO-Wing has the greatest surface area of any of our offerings to date, its sleek lines & trim profile will permit its use in a variety of applications for the driver or passenger. The ISO-Wing is available with a standard male mount, with the Magnum Quick Clamp for engine guard applications, or in our Tour-Tech system designed for use with fairing lowers (pg 96).

4450 ISO-Wing, Male Mount (pr) $103.99®

8003 Large Female Bullet Style Mount ISO-Peg (pr)

$46.99

8003

8011

8080

8010

8009

8082

8023

8081

8083

®

8009 Small Peg Set (8 pieces) $11.99

8010 Large Peg Set (8 pieces) $12.99

8023 Dually Peg Set (14 pieces) $17.99

4454 ISO-Wing Set (8 pieces) $20.99

8011 Shift Peg Set (4 pieces) $6.99

8080 ISO-Stirrup Heel Pads (pr) $10.99

8081 Brake Pedal Pad Set for 8029 (3 pieces)

$10.99


$10.99


$11.99

®

8029 Stock Replacement on FXST & Dyna Wide Glide (ea) Fits: All FXST Models, all ’08-’10 Rocker Models, ’93-’10 Dyna Wide Glides, ’08-’10 Dyna Fat Bob with Forward Controls, & all Küryakyn Forward Controls

$21.99

8044 The Longhorn — same fitment as 8029 (ea)

$31.99

8027 Stock Replacement for Dresser, Road King & FLST Models (ea) Fits: All Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes, & all FLST Models

$31.99

8029

8027

8044

®

8024 Longhorn Small Peg (pr) $51.99

8025 Large Peg with 1” ext. (pr) $51.99

Note: P/N 8024 includes chrome mounting hardware.

®

8001 Small Female 5/8” Square Mount ISO-Peg (pr)

$46.99


8021

8024

8025

8004

8028

8002

8000

4450

®

Finish off your set of ISO-Pegs with the ISO-Shift Pegs. The standard model is stock-like in size; the Longhorn has one more O-ring & is 5/8” longer (great for extended controls).

8004 Standard ISO-Shift Peg (ea) $16.99

8021 Longhorn ISO-Shift Peg (ea) $17.99

®

ISO-Pegs dampen vibration while giving your scoot that custom look - All at the same time! The industry’s most comfortable footpegs!

8000 Small Peg, Male Mount (pr)

$46.99

8002 Large Peg, Male Mount (pr)

$48.99

8028 Dually, Male Mount (pr) U.S. Patent D 405,393

$72.99

Note: P/N’s 8000 & 8002 include chrome mounting hardware.

8078

8077

8079

Interlocking Surface Ensures Arm Stays

In Place.

®

8077 ISO-Stirrup Mount, Female (ea) $23.99

8079 ISO-Stirrup Mount, Male (ea) $23.99

8078 ISO-Stirrup Arm (Fits Right or Left) (ea)

$26.99

A chrome & rubber two-piece clam-shell cover surrounds the end of your brake pedal to cover its coarse & jagged surface. Secured with two socket head screws & then locked in place by two set

screws – this cover is a cinch to install!

Fits: ’99-’10 XL883/1200 Customs, ’03-’10 FXDWG, ‘08-’10 FXDF with Forward Controls, & all V-Rod

(except VRSCD & VRSCR)

8022 Brake Pedal Cover (ea) $31.99

Reaching your rear brake will no longer require any fancy footwork! If you have a large high performance air cleaner, or have certain custom or relocated floorboards, this Extended Brake Pedal Pad will be in easy reach. A full one inch wider than stock (& most other custom brake pedal pads), this great looking pad helps keep the rear brake control more accessible. A unique clamshell design assures simple, quick installation.

Fits: All Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes & all FLST Models

4456 Extended Brake Pedal Pad (ea) $39.99

Note: Not compatible with fairing lowers on ‘04-Earlier Touring Models.

B e a w a r e o f r e d u c e d g r o u n d c l e a r a n c e & l e a n

a n g l e s w h e n i n s t a l l i n g & r i d i n g b i k e s e q u i p p e d

w i t h s t i r r u p s & / o r S w i t c h b l a d e P e g s .

®

8058 Chrome ISO-Stirrup Inserts (pr) $15.99

We added a heel rest to our popular ISO®-Pegs to give you floorboard-like comfort without the added bulk.

8074 ISO-Stirrups without Pegs, Male Mount (pr) $99.99

8075 ISO-Stirrups with Large ISO-Pegs, Male Mount (pr) $129.99

8076 ISO-Stirrups with Small ISO-Pegs, Male Mount (pr) $129.99

8062 ISO-Stirrups with Dually Pegs, Male Mount (pr) U.S. Patent D405,393

$139.99


FO

OT

RE

ST

S

8076

8074

80758062

5-1/2”

>> All ISO-Stirrups Include Chrome

Inserts.

Aileron 50305-02

Custom Footpegs Large 50915-90T

Custom Footpegs Small 50916-90T

Airfoil Small 50134-95

Airfoil Large 50133-95

Airfoil X-Large 50474-03

Slotted Chrome & Rubber 43280-01

Chrome & Rubber Large 50130-95

Chrome & Rubber Small 50131-95

Custom 50576-05

Centerline 52317-07

Streamliner 50211-04

Diamond Plate 50506-03Stealth 50359-04

Hog 50364-04

Smooth Chrome Billet 43121-01

Ironside 50935-07 Skull 50370-04

Flame 50312-03

X2 50472-08

4554

1-3/4”

P/N 4554 is compatible with the twelve H-D Accessory Pegs shown to the left.

P/N 4555 is compatible with the eight H-D Accessory Pegs shown to the right.

®

Finally, an affordable way to add the comfort of heel rests to your custom Harley-Davidson footpegs. Quick & easy to install, simply remove the male mount from the peg & replace it with the stirrup assembly.

4554 ISO-Stirrup Heelrests for H-D Pegs (pr)

$103.99

4555 ISO-Stirrup Heelrests for H-D Pegs (pr)

$103.99

U.S. Patent D506,707 & 6,893,038

Switchblade Footpegs are sleek, versatile, & supremely comfortable. In their standard compact mode, they are a large-surface-area,

rubber-isolated footpeg. Deploy the concealed heelrest, & now you have the added fatigue-fighting comfort of the famous

Küryakyn ISO-Stirrups. Although this setup will work in any peg location, these are the IDEAL footpegs for bikes using forward controls or as forward mounted cruise pegs!

4445 Switchblade Pegs, Male Mount (pr) $135.99


4448 Switchblade Pegs Replacement Rubber Pads (10 pieces)

$18.99


4555

3-5/8”

5/8”

Protect those new boots from melting all over your front pipe. These slick extenders put another couple inches between those size 15’s & your bike.

Fits: All male mount stirrup or footpeg applications

8043 1-1/4” Extenders (pr) $39.99

8041 2-1/4” Extenders (pr) $41.99

®

®

For Small ISO-Pegs only. For other Küryakyn Pegs, use Male Mount Peg Extensions (P/N 8063 or 8064).

8038 1” ISO-Peg Extensions (pr) $29.99

8039 1-1/2” ISO-Peg Extensions (pr) $39.99

Zinc-plated footpeg hardware on MY bike? NO WAY!

7943 Chrome Footpeg Hardware for Male Mount Pegs (pr)

$8.99

Use these adapters to easily install Küryakyn footpegs on your ’04-’10 Big Dog Motorcycle. Footpegs without adapters are sold separately & listed below.

8882 Peg Adapters for Big Dog (pr)

$31.99

Footpegs without Adapters7964 Small ISO-Pegs (pr) $36.99

7965 Large ISO-Pegs (pr) $38.99

4452 ISO-Wing Pegs (pr) $93.99

7963 Dually ISO-Peg (pr) $62.99

4464 ISO-SweptWing (pr) $69.99

4419 Pilot Pegs (pr) $59.99

4417 Flamin’ Pegs (pr) $93.99

4444 Mini Pilot Pegs (pr) $31.99

4401 Retro Pegs (pr) $62.99

4492 Widow Pegs (pr) $93.99

4471 Zombie Pegs (pr) $93.99

4476 Stiletto Pegs (pr) $93.99

4461 Kaiser Pegs (pr) $93.99

7520 Mini Dagger Pegs (pr)

$69.99

8006 Female for “Bullet” Mounts (pr)

$10.99

8007 Female for 5/8” Square Mount (pr)

$10.99

8008 Male Mount (pr) $19.99

8880 Serrated Male Mount (ea)

$19.99

8881 Splined Male Mount Adapter (pr)

$21.99

8065 Bolt for Small ISO-Peg (ea)

$2.99

8066 Bolt for Large ISO-Peg, Dually ISO-Peg, & ISO-Wing (ea)

$2.99

8067 Bolt for 8004 Shift Peg (ea)

$2.99

These polished stainless peg mounting pins are included with P/N 4595 & P/N 4597, but they can also be purchased separately to replace stock hardware. Includes two pins with clips & spring washers.

4592 Ammo Pin Peg Mounting Hardware (kit) $20.99

Extend your pegs outward just a couple of inches. At the end of the day, that’s the

difference between fried boots & fresh ones. Easily mount to the forward control’s

existing clevis. For another bonus, add clearance to get your leg around that protruding air cleaner.

Fits: Forward Controls on ‘00-‘10 FXST Models, ‘08-‘10 Rocker/C, ‘03-’10 FXDWG, ‘08-‘10 FXDF with Forward Controls, ‘04-‘10 XL1200C/883C

7524 Forward Control Peg Mount Extender (ea) $29.99

7525 Forward Control Peg Mount Extender (pr) $72.99

8006 8007

8008

8066

8065

80678880


FO

OT

RE

ST

S

These are made of machined steel & chrome-plated.



Rendering Shown

9”x 4-1/2”

9”x 4-1/2”

7906

®

ISO-Passenger Boards complement the ISO-Boards perfectly. These boards were

designed with comfort in mind for both you & your passenger. The curved leading edge is

“ankle friendly” to the rider when maneuvering into or out of parking spots.

Fits: ’93-’10 Electra Glides, ’94-’10 Road Kings (except, ’04-’07 FLHRS, ’02-’03 & ’07-’08 FLHRSE),

’98-’09 Road Glides (except ’00-’01 & ’09-’08 FLTRSE), ’93-’96 Tour Glides, ‘09-’10 Trikes, & all FLST Models with H-D

Accessory Passenger Floorboard Kits

7906 ISO-Passenger Boards (pr) $189.99

4543 Replacement Rubber Pads for P/N 7906 (8 pieces) $14.99

®

For those of you who would like to install a board in place of a footpeg, Küryakyn offers these variations of our eye-catching ISO-Board. These kits include our finely chromed ISO-Boards & a cast bracket to connect the board to the slip resistant splined adapter (sold separately). Please see illustration below to determine the style that best fits your application.

7916 ISO-Boards for H-D Models with Passenger Pegs (pr) $199.99

4455 ISO-Boards for H-D Models with Passenger Pegs (pr) $209.99

4543 Replacement Rubber Pads for ISO-Boards (8 pieces) $14.99


Outfit both driver & passenger & save $89.99 over buying them separately.

7902 Combo Set - 7905 ISO-Boards & 7906 ISO-Passenger Boards $399.99

7916

4455 ConfigurationP/N 4455 is recommended

for Passenger use only; bracket design elevates

board above existing peg location about 1-1/4”.

7916 Configuration P/N 7916 can be used for Driver or Passenger.

Verify operation of existing shift lever & brake pedal

will not be adversely effected by installation.

®–

ISO-Boards are a great looking & comfortable alternative to the lackluster original equipment

floorboards. Rubber ISO-ribs run the full length of the board providing both traction & comfort. Longer than stock length allows you more room on long hauls.

Fits: ’83-’10 Electra Glides, Road Kings, Road Glides, Street Glides, Tour Glides, Trikes, & all ‘86-’10 FLST Models

7905 ISO-Boards (pr) $299.99

4542 Replacement Rubber Pads for ISO-Boards (8 pieces) $19.99

Designed for Küryakyn’s folding floorboard products; Ribbed & Premium (P/N’s 4351 & 4357), Transformer II (P/N 4380), & ISO-Boards (P/N’s 7916 & 4455). Avoids a “double jointed” connection to the bike.

8883 Non-Pivoting Splined Male Mount Adapters (pr) $21.99


8883

15-1/2”x 4-1/2”

Add style & comfort in minutes by simply replacing your pegs with these radically designed Constellation Boards! Mount directly to your standard peg location & gain adjustments in almost any direction.

Floorboard measures 10” long by 4-1/2” wide. Extends back 4-3/4” from peg mount.

Floorboards intended to fold at mounting block, not at standard footpeg mount

Both driver & passenger locations allow infinite adjustments within a 2” horizontal section. Floorboards rotate completely around splined adapter for optimal leg positioning.

Choose between two positions when installing floorboards in the passenger location; the lower stock peg position or raised 1-1/8 inches for those shorter-legged riders

4358 Constellation Board Male Mount (pr) $209.99

4459 Replacement Rubber Pads for Constellation Floorboards (set) $25.99

Importance Notice: While the board may be rotated on the mount for a comfortable foot position, some angles may cause the board to contact other components on the bike before the board is folded up completely. Also, if the board is positioned so it will fold up as stock, the trailing end of the board may be in a position that could limit cornering clearance. Before ordering, be aware of components on the bike that may interfere with the placement of the floorboards.

2”1!1/8”

Repositions driver boards out & forward 1” & forward from stock location

Makes a noticeable difference in comfort; thighs aren’t as tight against the tank, right knee is not as tight against the air cleaner, & legs get to stretch out a little bit more

Compatible with Küryakyn ISO-Boards as well as H-D Traditional or Swept Wing shaped boards

Not compatible with Cruise Arm Mark III (P/Ns 7914, 7915) or standard-length version of Cruise Arm Mark IV (P/N 7844)

4588 Fits: ‘97-’10 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes (set)

$93.99

7528 Fits: ‘00-’10 FLST Models (set) $93.99

by Diamond D

Move your stock driver boards outward 3/4 of an inch. It doesn’t sound like much, but now you don’t have to hug the gas tank with your thighs to get your foot fully on the board. You’re also alleviating some heat build-up by allowing the hot air to get out between your leg & the bike. All bolts are stainless & the spacers are powder coated black for durability. Running Board Extenders are compatible with fairing lowers.

Fits: ’92-’08 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings

450 Running Board Extenders (set) $39.99

Note: Not compatible with Chrome Display Stand, H-D part number 99002-97.


FO

OT

RE

ST

S

45887528

Stock

Relocated

All day long, all they see are the bottoms of your boots. But when you’re standing around with the crowd looking at bikes, that’s when your Floorboard Covers strut their stuff. Standing out without being pushy, the chromed inlays play nice with the rest of the Küryakyn bling that makes your bike unique. Direct replacements for the stock floorboard covers, the assemblies sit on top of the stock steel base plates so no comfort is compromised & the raised rubber edge keeps your boot heels off the pipes. Now available to match our most popular themes!

Fits: Traditional Boards -‘84-‘10 Electra Glides (except ‘04-‘05 FLHTCSE & ‘06-‘10 FLHTCUSE), ‘84-‘96 Tour Glides, ‘98-’09 Road Glides (except ‘09 FLTRSE), ‘94-‘10 Road Kings (except ‘04-‘07 FLHRS, ‘07-‘08 FLHRSE), All ’09-’10 Trikes & all ‘86-‘08 FLST/FLSTC, ’90-’10 FLSTF, ‘93-’96 FLSTN, ’97-’03 FLSTS, ’05-’07 FLSTSC

4566 Zombie Driver Board Covers (pr) $169.99

7522 Flame Driver Board Covers (pr) $169.99

7551 Widow Driver Board Covers (pr) $169.99

Express yourself! Created from a sculpted black rubber pad with a chromed inlay, our Passenger Floorboard Inserts match our killer Driver Floorboard Covers. Easily installed in place of the stock, ribbed rubber pads, they are now available to match our most popular themes!

Fits: ’86-’10 Electra Glides, Road Glides, Tour Glides, Road Kings, & Trikes with Traditional D-Shape Passenger Floorboards, also all ’86-’10 Softail Models equipped with H-D accessory Passenger Floorboard Kits using Traditional D-Shape Floorboards

4572 Zombie Passenger Floorboard Inserts (pr)

$69.99

7523 Flame Passenger FloorBoard Inserts (pr)

$69.99

7552 Widow Passenger FloorBoard Inserts (pr)

$69.99

7523

7552

7551


4566

P/N 1052

Perk up that dull oil filler cap with our distinctive themed chrome-plated,

die-cast cap! See Pg 150


4572

7522

+ =One Bike Offset or Longhorn Offset Highway Pegs

Comfortable Cruising for Any Size Rider!


U.S. Patent D405,393 (except P/N 4616)

The all-in-one answer for long-haul comfort. We combined our most popular highway peg components into one product that’s attractive, adjustable, & easy to install.

4574 Longhorn Offset Dually with 1-1/2” Magnum Quick Clamp (pr) $159.99

4575 Longhorn Offset Dually with 1-1/4” Magnum Quick Clamp (pr) $159.99

7980 Longhorn Offset Dually with 1” Magnum Quick Clamp (pr) $155.99

4616 Longhorn Offset SweptWing with 1-1/4” Magnum Quick Clamp (pr) $159.99W W W . K U R Y A K Y N . C O M

FO

OT

RE

ST

S

TallIn-BetweenShort

4575

4575 4616

3”

2”

These Cruise Mounts with positive locking Quick Clamps offer an incredible range of adjustability. The entire assembly may be moved up or down on the engine guard. The arm & footpeg may be further adjusted along a vertical or horizontal arc. A unique clevis permits angle adjustment of the footpeg.

The heavy duty Quick Clamp & sturdy offset arm ensures that the footpegs will clear fairing lowers & will stay where you put them! Tour-Tech Cruise Mounts are available by themselves, permitting the use of any H-D style male mount peg, or with a variety of Küryakyn footrests. Recommended for H-D Touring Models, Trikes, or any Model using 1-1/4” engine guards.

4520 Mounts Only, No Pegs $109.99

4522 With ISO-Wings $199.99

4523 With Dually Pegs U.S. Patent D405,393

$179.99


Clamp a set of these onto your engine guard & enjoy all-day comfort. The clamp can be positioned forward or back & the arm offers full 360-degree rotation for Tall, Short, or In-Between riders!

4438 Pilot Pegs with Offsets & 1” Magnum Quick Clamps (pr) $145.99

4436 Pilot Pegs with Offsets & 1-1/4” Magnum Quick Clamps (pr) $145.99

7998 Small ISO-Pegs with Offsets & 1-1/4” Magnum Quick Clamps (pr) $124.99

7999 Large ISO-Pegs with Offsets & 1-1/4” Magnum Quick Clamps (pr) $135.99

7993 Dually ISO-Pegs with Offsets & 1-1/4” Magnum Quick Clamps (pr) U.S. Patent D405,393

$145.99

4436

7998

7999

1-1/4”

4-1/2”

This footpeg mount allows one to fine tune their riding position. Measuring 4-1/2” long with a 1-1/4” offset, the rider may now increase or decrease the reach to the highway peg.

The X-Tension mounts with a 1/2”-13 bolt & may be used on OEM highway peg mounts, some forward

control plates, with Magnum Quick Clamps, etc. It will accept any H-D style male mount footpeg.

4515 X-Tension (pr) $83.99

4501 X-Tension with Dually & 1-1/4” Magnum Quick Clamp (pr) U.S. Patent D405,393 & D411,440

$189.99

4501

7993

4526 Mounts Only, No Pegs $109.99

4528 With ISO-Wings $199.99

4529 With Dually Pegs U.S. Patent D405,393

$179.99

4523

4522

4526

4520

4528


All ISO-Stirrups Include Chrome

Inserts

Our most popular cruise pegs! With the trusted Magnum Quick Clamp.

®


8032 Small ISO-Pegs with Mounts & 1-1⁄4” Magnum Quick Clamps (pr)

$99.99

8033 Large ISO-Pegs with Mounts & 1-1⁄4” Magnum Quick Clamps (pr)

$103.99

7992 Dually ISO-Pegs with Mounts & 1-1⁄4” Magnum Quick Clamps (pr) U.S. Patent D405,393

$135.99

4451 ISO-Wings with Mounts & 1-1/4” Quick Clamps (pr) $145.99


4435 Pilot Pegs with Mounts & 1-1/4” Magnum Quick Clamps (pr)

$129.99

Leave it to Küryakyn to come up with a better Cruise Board system for H-D engine guards. Built-in heel rests & vibration isolating rubbers provide more support & greater comfort on your rides. The clamp simply folds around the engine guard & is secured with one bolt. The interlocking tooth adjustment securely holds the mount in any angle. Fits all 1-1/4” engine guards & works great with fairing lowers too! Board measures 8” long & 4” wide at widest point.

7901 Cruise Boards for 1-1/4” Engine Guards (pr)

$269.99

®


This setup permits the use of the ISO-Stirrups on 1-1/4” engine guards.

8070 Small ISO-Pegs with ISO-Stirrup & 1-1/4” Magnum Quick Clamps (pr) $166.99

8071 Large ISO-Pegs with ISO-Stirrup & 1-1/4” Magnum Quick Clamps (pr) $166.99

U.S. Patent D411,440; D506,707 & 6,893,038

4443 Switchblades with Mounts & 1-1/4” Magnum Quick Clamps (pr)

$189.99

8071

8070

4443


FO

OT

RE

ST

S

8033

7992

8032

4451

4435

An extended version of our popular 7996. It’s 3-1/4” radius gives an incredible 6-1/2” range of adjustment. It’s gently curved shape keeps the peg tucked in toward the center line of the bike for maximum comfort. Incorporating an innovative locking device, this mount is guaranteed not to slip.

8016 Longhorn Offset Peg Mounts (pr) $72.99

7985 Longhorn Offset with 1” Magnum Quick Clamps (pr) U.S. Patent D411,440

$114.99

7986 Longhorn Offset with 1-1/4” Magnum Quick Clamps (pr) U.S. Patent D411,440

$114.99

4577 Longhorn Offset with 1-1/2 ” Magnum Quick Clamps (pr) U.S. Patent D411,440

$117.99

These screws & D-Washers can be used to replace lost or damaged pieces in any of our Magnum style peg mounts. These mounts are found in virtually all of our highway peg assemblies.

4538 Replacement Clevis Screws with D-Washers (set) $5.99

4508 D-Washers (pr) $2.99

4568 Replacement Mount for Küryakyn Offset, Longhorn Offset, & Underseat Mounts for Softail (ea)

$21.99

8015 Standard Peg Mount (1/2”-20 mounting bolt) (pr) $19.99

8061 Short Magnum Peg Mount (1/2”-13 mounting bolt) (pr) $31.99

8088 3-1/2” Long Peg Mount (1/2”-13 mounting bolt) (pr) $39.99

8087 3-1/2” Long Peg Mount (3/8”-16 mounting bolt) (pr) $39.99

7996

7996 Offset Peg Mounts (1/2”-13 mounting bolt) (pr)

$51.99


This setup will allow the use of any H-D style male mount pegs with our innovative Magnum Quick Clamps &

Clevises for engine guard applications.

4573 1-1/2” Magnum Quick Clamp with Clevis (pr)

$72.99

7944 1-1/4” Magnum Quick Clamp with Clevis (pr)

$72.99

4576 1” Magnum Quick Clamp with Clevis (pr)

$72.99


7986

2!1/2”

3!1/4”

8016

US Patent D411,440

We’ve made a lot of friends with these. Stainless steel construction for superior strength & hinged construction for fast simple installation. No more stripped bolt heads common of 3-piece designs.

7940 1” I.D. Fits Some Aftermarket Engine Guards (ea) $23.99

1002 1” I.D. Fits Some Aftermarket Engine Guards (pr) $42.99

7941 1-1/8” I.D. Fits Many H-D Frame Downtubes (ea) $23.99

8073 1-1/4” I.D. Fits H-D Engine Guards (ea) $23.99

1000 1-1/4” I.D. Fits H-D Engine Guards (pr) $42.99

7942 1.35” I.D. Fits Metric Cruiser Frame Downtubes (ea) $23.99

1001 1-1/2” I.D. Fits Boss Hoss (pr) $42.99

Note: All clamps have a 1/2” hole for peg mount.

Enormous numbers of people have asked us how they can stretch their legs a little without spending several hundred dollars for extended controls. Here’s the answer… a convenient fold-forward, comfortable cruise peg that fastens in place of your stock peg & provides a secondary fold-out peg 3” forward. Replaces any H-D style male-mount peg.

4466 SwingWing Pegs, Male Mount (pr) U.S. Patent D560,562

$169.99

4468 SwingWing Peg Replacement Rubber Pads (set) $20.99

These super adjustable cruise pegs for Sportsters are quick & easy to install & provide a wide range of adjustment. They bolt securely to the welded cross brace near the bottom of the downtubes & work on models with or without forward controls. Accepts any H-D style male mount footpegs (sold separately).

7868 Fits: ’04-’10 Sportster (ea) $155.99

7869 Fits: Late ’84-‘03 Sportster (ea) $155.99

We’ve taken our tried & trued Mustache Bar & brought it into the 21st Century. The great function of the mustache bar has stayed the same -

adding the extra peg positions you need on those cramp-inducing hauls. The difference between old & new lies within the ability to be adjusted to fit

virtually any rider. Due to its cleverly designed clamp system, this mustache bar can be moved up or down the downtubes & the bar can be rotated to

provide multiple fore & aft adjustments. Ride on in comfort! Accepts any H-D style male-mount pegs (sold separately).

7548 Fits: All ’86-’10 FLST, FXST, & Rocker Models (ea)

$169.99

7862 Fits: All ’91-’10 Dyna Models (ea) $169.99


FO

OT

RE

ST

S

P/N 4463

®

Streamline all your pegs for that high-style look. See Pg 83


Patent Pending

Turn your bike into a lazy boy with these great Cruise Arms! Heavy-duty chrome arms wrap around your stock floorboards just right, so kick back & relax! TV remote & popcorn not included.

Mounts to frame, not the board. No drilling required.

Compatible with Küryakyn ISO-Boards & all styles of floorboards currently offered by H-D.

Offered in short arm or long arm configurations to accommodate all riders.

Each configuration allows several inches of fore & aft adjustments to fine tune positioning.

Not compatible with engine guards.

Accepts any H-D style Male Mount Footpeg, sold separately.

7840 Standard For Shorter Riders* (set) $199.99

7841 Extended For Taller Riders (set) $199.99

*Adjustment of Standard Version is limited on ‘07-‘10 Models. Not compatible with oil coolers.

Fits: ’97-’07 Electra Glides, Road Glides, Street Glides, & Road Kings without engine guards

7844 Standard For Shorter Riders (set) $199.99

7845 Extended For Taller Riders (set) $199.99

Note: Not compatible with oil coolers.

It’s a real challenge to mount a set of highway pegs on a forward control equipped bike. We’ve done it at last with this very adjustable set-up. Fastening between the forward control & the footpeg, these cruise mounts accept any Küryakyn footpeg in the primary location & any male mount footpeg in the cruise location.

7887 Peg Mounted Cruise Mounts with Male Adapters (pr)

$159.99

Note: Primary foot position only accepts the following Küryakyn Pegs: Stiletto, Switchblade, Dually, Large ISO, Small ISO, Retro, Pilot & ISO-Wing.

This design allows easy installation by simply drilling mounting holes in the steel floorboard base for the adjustable mount & full-length reinforcing plate. The entire assembly mounts to the floorboard. The reinforcing plate adds stiffness to the floorboard to keep flex to a minimum. (The stock rubber floorboard pads remain unaffected)

The arms are fully adjustable front to back & are available with or without our cushy ISO-Pegs. Cruise Arm Mark III adjustment is limited when installed on motorcycles with engine guards.

Fits: ‘84-‘10 Electra Glides (except FLHTCU, FLHTK, ‘04-‘05 FLHTCSE & ‘06-‘10 FLHTCUSE), ‘84-‘91 FLTC Tour Glides, ‘98-’09 Road Glides (except ‘09 FLTRSE), ‘94-‘10 Road Kings (except ‘04-‘07 FLHRS, ‘07-‘08 FLHRSE), ’10 Street Glide Trikes & ‘86-‘08 FLST/FLSTC, ’90-’10 FLSTF, ‘93-’96 FLSTN, ’97-’03 FLSTS, ’05-’07 FLSTSC

IMPORTANT: ’84-’08 TOURING MODELS REQUIRE SUPPORT KIT, P/N 4533! Cruise Arm Mark III is not compatible with fairing lowers.

7914 Cruise Arm Mark lll (pr)

$169.99

7915 Cruise Arm Mark lll with Small ISO-Pegs (pr)

$199.99

4533 Cruise Arm Support Kit (ea) Note: Required for’84-’08 Touring Models

$51.99

Note: Only compatible with O.E.M. H-D floorboards as shown at left.


Standard

Extended

7844

7845

Add the comfort of cruise pegs & keep that clean simple style with these Adjustable Cruise Peg Mounts. These little beauties bolt directly onto your floorboards & allow full adjustability for optional foot positions. Versions with 2 Inch or 4 Inch arms are available to fit H-D’s “Traditional” shape driver floorboard & H-D’s “Swept Wing” shape floorboard; see line listings for complete application information. Male mount pegs sold separately.

Fits: ‘84-‘10 Electra Glides (except ‘04-‘05 FLHTCSE & ‘06-‘10 FLHTCUSE), ‘84-‘96 Tour Glides, ‘98-’09 Road Glides (except ‘09 FLTRSE), ‘94-‘10 Road Kings (except ‘04-‘07 FLHRS, ‘07-‘08 FLHRSE), All ’09-’10 Trikes & all ‘86-‘08 FLST/FLSTC, ’90-’10 FLSTF, ‘93-’96 FLSTN, ’97-’03 FLSTS, ’05-’07 FLSTSC Models

7535 For Traditional Boards – 2 Inch Arms (pr) $169.99

7537 For Traditional Boards – 4 Inch Arms (pr) $179.99


7536 For Swept Wing Boards – 2 Inch Arms (pr) $169.99

7538 For Swept Wing Boards 4 Inch Arms (pr) $179.99

7535

7536

Shown with Dually ISO-Peg (sold seperately)

Adding the comfort of highway pegs to your FL Softail or Touring rig doesn’t have to mean extra clutter. These stealthy highway

pegs simply bolt in place on the bottom of the Traditional or Swept Wing H-D footboard. When deployed, they fold out & lock into place, much like a pocketknife blade. A release

lever allows them to return to their original, almost invisible position when not in use. A hinge allows them to fold up & back if cornering touch-down occurs.

Fits: ‘84-‘10 Electra Glides (except ‘04-‘05 FLHTCSE & ‘06-‘10 FLHTCUSE), ‘84-‘96 Tour Glides, ‘98-’09 Road Glides (except ‘09 FLTRSE), ‘94-‘10 Road Kings (except ‘04-‘07 FLHRS, ‘07-‘08 FLHRSE), All ’09-’10 Trikes & all ‘86-‘08 FLST/FLSTC, ’90-’10 FLSTF, ‘93-’96 FLSTN, ’97-’03 FLSTS, ’05-’07 FLSTSC

7540 For Traditional Boards $189.99


7541 For Swept Wing Boards $189.99

7542 Replacement Wear Guards for P/N’s 7540 & 7541 (pr)

$10.99

7543 Replacement Rubber Pads for P/N’s 7540 & 7541 (pr)

$15.99


FO

OT

RE

ST

S

7540

7541

With this simple bracket kit, you can easily install Küryakyn Silver Bullets (or any other light using a 5/16” mounting screw). The kit includes two brackets

& hardware to secure them to the existing holes beneath the foot rest area.

Recommended options for Silver Bullets include P/Ns 2303 or 2319 - See pg 46 for more details.

2284 Ergo Guard Light Mounting Brackets (pr)

$39.99

Note: If adding Silver Bullets to function as driving lights, we highly recommend using our Wiring & Relay Kit (P/N 2328).

U.S. Patent D513,719; 6,969,083 & 7,073,808

Küryakyn has rewritten the book on engine guards. For years, engine guard designs have changed very little. By incorporating both tubing & investment cast components into our design, we can create shapes & forms & include features not possible with traditional engine guards. Integrated, folding pegs can be used in either the stowed or deployed position.

Fits: ’00-’10 FLST Models (Includes shortened replacement brake pedal)

7891 Ergo Guard for Softail $379.99


Intended for Tall Riders over 6ft

U.S. Patent D513,719; 6,969,083 & 7,073,808

Combining a stylish engine guard with built-in highway pegs, the Ergo Plus Engine Guard brings innovative design to the limits. Use the highway pegs folded in or flip them out for an optional foot position! Designed with an ergonomic pull back, your feet will feel secure with less outward leg pressure no matter what position you have them in. With a slick mounting system, the Ergo Plus Engine Guard bolts directly to existing mounts on your frame & does not use any clumsy universal clamps. You’ll be back on the road with your new engine guard & the comfort of multiple foot positions in no time!

7888 Fits: ‘97-’08 Electra Glides, Street Glides & Road Kings (ea)

$379.99

7532 Fits: ’09-’10 Electra Glides, Street Glides, & Road Kings (ea)

$379.99

7529 Fits: ’00-’10 FLST Models (ea) Includes shorted replacement brake pedal.

$379.99

Attention! 2000-later Softail passenger peg mounts are secured with a single fastener. If you install any Küryakyn offset adapters, pegs with heel rests, or wide footpegs, pressure applied to the footrest will eventually cause the mount on one side of the bike to loosen. Our Anti-Rotation Passenger Footrest Mounts anchor themselves to the swingarm pivot bolt so they cannot rotate & come loose.

Two versions are available, one with a clevis to accept any H-D style male mount footrest or offset adapter & one designed to accept ISO-Passenger Boards or stock H-D passenger boards.

Fits: ’86-’07 Softail Models (except Deuce, Fat Boy & Deluxe)

4548 Anti-Rotation Passenger Peg Mount (pr) $103.99

4562 Anti-Rotation Passenger Board Mount (pr) $145.99

Note: May be used on Deuce, Fat Boy, & Deluxe if stock shotgun exhaust & rear exhaust support bracket has been removed & replaced by a staggered dual or 2-1 exhaust system.

SweptWing Peg Shown (sold separately)

A must-have for passengers! Complete circular rotation for 360 degrees of comfort!

Can be used to reposition any male mount footpeg Offered in two lengths – 2” or 4” Both male end & clevis can be rotated 360 degrees & lock securely

when fully tightened Investment cast & chrome plated for strength & durability

4556 2” Adjustable Lockable Offset (pr) $85.99

4557 4” Adjustable Lockable Offset (pr) $85.99

Note: Not recommended for use on mounts fastened to the motorcycle with only a single fastener. Leverage applied by the offset arm will cause the mount to twist & loosen from the motorcycle. We recommend Anti-Rotation Peg Mounts (P/N 4548) when using these on ’00-’07 Softails.

The cogged mount lets you adjust the offset for greater flexibility in a wide variety of applications without fear of slippage. 2” & 4” versions are offered to foot the bill for highway pegs, passenger pegs, or any H-D style male mount application. Tapered end accepts any Küryakyn footpeg (sold separately).

7936 2” Lockable Offset (pr) $62.99

7937 4” Lockable Offset (pr) $62.992” 4”

4557

4556


FO

OT

RE

ST

S

7882 Replacement Pin, Spring, & Knob Kit for 4505, 7926, 4570, 4571 (ea)

$9.99

7883 Pivot Shaft Service Kit for 4505, 7926, 4570, 4571 (ea)

$17.99

Replace the stock black mounts on your ’93-’10 Dresser or Road King. They accept stock or most accessory passenger floorboards.

4536 Chrome Passenger Board Mounts (pr)

$124.99

4569 Chrome Passenger Board Mount (ea)

$62.99

Not all passengers are created equal. Six combinations of height & tilt & up to 2-1/2” of additional legroom ensure everyone gets to ride in comfort. Only minutes to install & adjust.

Fits: ’93-’09 Electra Glides, Road Kings, Road Glides & Tour Glides equipped with passenger floorboards

4617 Baron Passenger Floorboard Comfort Mount Kit (kit)

$69.99

Since bikes don’t have 6-way power seats, Küryakyn offers the accessories for supreme

passenger comfort!

Adjustable Passenger Pegs (pg 105) Passenger Armrests (pg 192) Relocator for Tour-Pak® (pg 193)

Passenger Armrests

Relocator for Tour-Pak

Adjustable Passenger Pegs


4536

Adjustable Passenger Peg Kit (pr)

$199.99

Extended Board Mount for

Rinehart (ea) Chrome $93.99

Black $72.99

Chrome Board Mount (ea)

$62.99

ISO-Passenger Boards (pr)

$189.99

’93-’06 with Stock (black) Mounts 7926

’93-’06 with Stock (black) Mounts & Rinehart Exhaust 7926 4537 (black)

’07-’09 with Stock (black) Mounts 4571

’10 with Stock (black) Mounts 4353

’07-’08 with Stock (black) Mounts & Rinehart Exhaust 7926 4561 (chrome) 4569

’04-’06 Screamin' Eagle FLHTCSE & FLHTCUSE 4570

’04-’06 Screamin' Eagle FLHTCSE & FLHTCUSE with Rinehart Exhaust 7926 4561 (chrome) 4569

’07-’10 Screamin' Eagle FLHTCUSE 4505

’07-'08 Screamin' Eagle FLHTCUSE with Rinehart Exhaust 7926 4561 (chrome) 4569

’93-’10 with Chrome Küryakyn Mounts (P/N 4536) or Chrome H-D Accessory Mounts (H-D P/N 53070-00) 7926

’93-’10 with Chrome or Black H-D Accessory Mounts (50378-07A, 50379-07A,53070-00A) 4353

’93-’10 with Chrome H-D Adjustable Passenger Floorboard Mount Kit (H-D P/N 50768-07) 4505

’93-’08 with Chrome Küryakyn Mounts (P/N 4536) or Chrome H-D Accessory Mounts (H-D P/N 53070-00) & Rinehart Exhaust

7926 4561 (chrome)

’93-’10 with H-D Chrome or Black Passenger Floorboard Support Kits (H-D P/Ns 52714-04 or 50378-07) 4570

’93-’08 with H-D Chrome or Black Passenger Floorboard Support Kits (H-D P/Ns 52714-04 or 50378-07) & Rinehart Exhaust

7926 4561 (chrome) 4569

'93-'08 Street Glide, Road King Custom, Screamin' Eagle Road King , or other Touring Models with Passenger Pegs with Rinehart Exhaust

7926 4561 (chrome) 4569 7906

Important Information: 1 ‘07-’08 Screamin’ Eagle Ultra Classics with Rinehart Exhaust must remove the stock adjustable passenger board mounts & replace them with fixed mounts. 2 Street Glide & other Models updating from passenger pegs to passenger boards may substitute H-D accessory passenger boards for our ISO-Passenger Boards.

2

1

These kits give passengers the ability to move their feet from the board to the peg, or best of all, they can lay their calves on the pegs when the driver has their feet on the highway pegs (as shown left). You will love the flexibility!

A bolt action locking device on the swing arm adds an intermediate position to make hours in the passenger seat more enjoyable for passengers of different heights & does not interfere with floorboard operation. These work perfectly with stock H-D passenger boards or our P/N 7906 ISO-Passenger Boards (shown).

Most common mount used from ’93-’09. Please note that the ’07-’09 version has a slightly different profile than the ’93-’06 version & DOES NOT accept the same Adjustable Passenger Peg set.

A chrome version of the stock ‘93-’06 stock mount. Sold as Küryakyn P/N’s 4569 & 4536 or H-D P/N 53070-00.

Stock on ’04-’06 Screamin’ Eagle Electra Glides & sold as an accessory as H-D P/N’s 52714-04 & 50378-07.

Stock on ’07-’10 Screamin’ Eagle Ultra Classics & sold as an accessory as H-D P/N 50768-07.

Black finish on ’10 production motorcycles, offered in black or chrome as an accessory in H-D P/N’s 50378-07A, 50379-07A, & 53070-00A. This mount will retrofit ’93-’09 models so it is NOT exclusive to 2010 motorcycles.


FO

OT

RE

ST

S

4353

We Have Provided These Pictures to Assist You in Making your Adjustable Passenger Peg Selection. Carefully Review the Chart Below to Select the Adjustable Passenger Pegs & Additional Required Components for Your Specific Application.

7926

Beautify your bike & give your passenger more leg room all in one with these chrome-plated Passenger Peg Mounts! Our design moves the peg location forward 1-1⁄4” from the stock position.

Fits: All ’02-’06 V-Rod Models (except ‘06 VRSCD & VRSCR)

4545 Passenger Peg Mounts for V-Rod (pr) $51.99

Right out of the Sixties, these pegs will give your passenger that “breeze past the knees” chopper style riding position. Great for giving small passengers rides also.

Fits: ’86-’07 Softails (except Deuce, ‘06 FLSTFSE, ‘07 FLSTF, ‘06-’07 FXST/B/C/S)

7959 Underseat Passenger Peg Mounts with Small ISO-Pegs (pr)

$124.99

7960 Underseat Passenger Peg Mounts for Softails (pr)

$93.99


7924

You remember that story from when you were three years old, The Princess & the Pea? That story had a valuable lesson, similar to what you’ll learn from our new Passenger Peg Mounts. They are direct replacements for the stock passenger floorboards, accept any H-D style male mount peg, & adjust to any of the three stock positions—plus they rotate 360º around a 1-5/8” diameter. So any princess can find comfort. Which, if you were paying attention, was pretty worthwhile at the end of the day.

Fits: ’93-’10 Electra Glide, Road Glides, Street Glides, Tour Glides, Road Kings, & Trikes

7527 Adjustable Passenger Peg Mounts (pr) $99.99

Easy one-bolt installation on either FXST or FLST Models provide four positions for alternative footrest placement or out of the way storage. The retractable arms come equipped with our Small ISO-Pegs or add a female clevis for any H-D style male mount peg. An optional Floorboard Adapter (P/N 7924) will permit the use of O.E.M. H-D passenger floorboards or our awesome ISO-Passenger Boards.

Fits: ‘86-’07 Softails

7925 Adjustable Passenger Pegs for Softails (pr) $197.99

7924 Floorboard Adapters (pr) Note: Readily accepts Softail/Dresser style boards or Küryakyn ISO-Passenger Boards.

$83.99

Note: Not compatible with stock shotgun or crossover dual exhaust on Deuce, Fat Boy, Deluxe, Heritage Springer, or Springer Classic. Not compatible with Boomerang Frame Covers on ‘86-’99 Models. Check for clearance with other accessories mounted in this area, i.e. H-D teardrop toolboxes.

Shift Linkages

Shift Levers

Brake Pedals

Forward Controls


®

®

There are a bunch of expensive shifter rods out there today, but the Widow takes you to a whole new level & doesn’t cost an arm & a leg! Complete chrome steel linkage with chrome-plated die-cast black widow – Rated WAY BAD.

Fits: ’80-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes; ’86-’10 Softail Models (except ’97-’99 FLSTS); & ’93-’02 Dyna Wide Glides

1041 Widow Shift Linkage (ea) $103.99

Note: Not compatible with Küryakyn Inner Primary Covers on ’07-’10 Softails or Touring Models.

©2009

Attention pyromaniacs: Light up your shift arm with this easy-to-install cover. Looks great by itself, but things really get blazing when used alongside our Flame Shift Linkage (P/N 1064).

Fits: ’82-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, & Trikes

1059 Flame Shift Arm Cover (ea) $49.99

We can’t tell you that this Flame Shift Linkage will give you smokin’ fast shifts, but it’ll create a super hot look on your Softail or Touring rig! The unique flames are three dimensional, not stamped or laser cut. Top quality ball joints are used for smooth action & long life. A perfect match to the Flame Shift Arm Cover (P/N 1059) on Dressers & Road Kings & a natural addition to our Flame Series.

Fits: ’80-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes, ’86-’10 Softail Models (except ’97-’99 FLSTS); & ’93-’02 Dyna Wide Glides

1064 Flame Shift Linkage (ea) $109.99


CO

NT

RO

LS

Beautiful chrome-plating, high-quality ball joints, & streamlined jam nuts make this shift linkage a great value for anyone looking to replace their stock shift linkage.


9085 Chrome Shift Linkage (ea) $41.99

Our Shift Linkage Extension Kit makes it possible to use all Küryakyn theme linkages or most any standard shift linkage on bikes equipped with extended controls. The kit includes 1-1/2” & 2-1/2” extension adapters which can be used independently or threaded together for up to 4” of extension.

1067 Shift Linkage Extension Kit (ea) $19.99


1054 1042

©2008

Add some character to that stock shift linkage! Our chrome steel linkage is a complete replacement for your dull stock shifter rod. Complement this shifter with our Zombie Pegs & Zombie Mirrors for a “Bad-Boy” look for your bike.


1042 Zombie Shift Linkage (ea) $103.99

Note: Not compatible with Küryakyn Inner Primary Covers on ’07-’10 Softails or Touring Models.

Detail; the difference between the unremarkable & the distinctive. The Zombie Shift Arm Cover, whether used alone or as an addition to other members of this popular collection, provides a distinctive touch sure to be caught by those with a discerning eye.

Fits: ’82-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, & Trikes

1054 Zombie Shift Arm Cover (ea) $49.99

Shift with style! Machined from billet aluminum & then chrome-plated with care, our Girder Shift Linkage is a beautiful addition to your bike. Innovative design looks great by itself or with our Girder Shift Lever where applicable.


9054 Girder Shift Linkage (ea) $103.99

Our Extruded Shift Linkage has a massive bold look. Personalize with the included red, blue & chrome lock nuts.

9059 Fits: ’80-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes; ’86-’10 Softail Models (except ’97-’99 FLSTS); & ’93-’02 Dyna Wide Glides (ea)

$79.99

1063 Extended Extruded Shift Linkage - Custom Applications, Adjusts from 15” to 15-1/2” (ea)

$79.99


CO

NT

RO

LS

©2008

Give your bike some real attitude with the sinister red-eye stare of the Wild Boar Shift Linkage. The complete chrome steel linkage with chrome-plated ABS wild boar transforms this uneventful area of your bike in minutes.


1040 Wild Boar Shift Linkage (ea) $103.99

Conceal your plain zinc-plated brake rod with our precision fitted chrome cover. Snaps-on in seconds & melds nicely with the rest of your sparkling engine.

Fits: ’04-’10 XL1200C & XL883C (Also fits ’04-’10 Sportster Models equipped with H-D accessory forward controls, H-D P/Ns 33395-04 or 33398-04)

9042 Brake Rod Cover (ea) $29.99

Brighten up that stock shifter arm with this easy to install cover. Choose either our classy Silhouette or our smooth Deco style to make a noticeable difference on your bike.

1043 Fits: ‘82-’07 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings (ea)

$49.99

1044 Fits: ’82-’06 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings WITHOUT Küryakyn Inner Primary Cover Front Extension (P/N 8370); & ’07 Electra Glides, Road Glides, Street Glides, & Road Kings WITHOUT Küryakyn Inner Primary Cover (P/N 8397) (ea)

$29.99

1048 Fits: ’82-’06 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings WITH Küryakyn Inner Primary Cover Front Extension (P/N 8370); & ’07 Electra Glides, Road Glides, Street Glides, & Road Kings WITH Küryakyn Inner Primary Cover (P/N 8397) (ea)

$24.99

1043

9056 Barrel Style, R.H. Female Threads (ea)

$20.99

9057 Ball Joint Style, without Stud, R.H. Female Threads (ea)

$25.99

9058 Ball Joint Style, R.H. Female Threads

$29.99

9046 Ball Joint Style with Short Stud, R.H. Female Threads

$20.99

9056

90589057

9046


The Train Rod’s sleek shape is reminiscent of the streamlined trains of the 30’s & 40’s while its integrated amber L.E.D.’s are right out of the 21st Century. Installs quickly & is easily wired into the bike’s run circuit.


9047 Train Rod Shift Linkage (ea) $129.99

1048

1044

Place your shift peg in an easy to reach location & gain increased leverage for easier, more precise shifts.

Fits: Softail, FLT, FXR & Küryakyn Forward Controls for Big Twins

1025 Girder Shift Lever (ea) $79.99

Patent Pending

The acceleration adrenaline rush is over & you’re ready to cruise! With our Folding Heel Shift Lever, your heel shift peg can quickly be tucked away with the flick of your heel leaving your left floorboard as open as the road ahead. V-Twin torque says you probably won’t need to kick the peg back down until the next town, so until then a built-in detent ball takes over & holds your shift peg in the up position. Accepts any Küryakyn or H-D shift peg, sold separately.

Fits: Heel position on ’83-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes & all ’86-’10 FLST Models

1069 Folding Heel Shift Lever (ea) $79.99

Stock LengthStock Length


CO

NT

RO

LS

Stock Length

2” Longer Than Stock

Stock Length

1066

1065

Give your gears a little edge! Replace the everyday stock pieces on floorboard equipped Touring & FLST Models with our inventive Shift Levers. Two styles available serve as great complements to any of our other foot control accessories. Accepts any Küryakyn or H-D shift peg (sold separately).

Fits: Heel or Toe on ’83-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes; & all ’86-’10 FLST Models

1065 Slotted Shift Lever (ea) $49.99

1066 Liberator Shift Lever (ea) $59.99

No more cramped space. These stylish levers are longer than stock & push the shift peg away from the floorboard. Shift peg sold separately.

1034 Fits: Toe Position on ’83-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes; & all ’86-’10 FLST Models (ea)

$85.99

1035 Fits: Heel Position on ’83-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes; & all ’86-’10 FLST Models. Toe Position on all ’87-’99 FLST Models (ea)

$85.99

These premium quality accessories quickly & easily allow you to remove the heel shift lever on Dressers, Road Kings, or any FLST Model. Unique design keeps the shift shaft in perfect alignment to avoid premature shaft wear, a problem common to similar products. The Delrin® lining eliminates rattles & keeps your bike shifting as smoothly as ever.

1045 Fits: ’80-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, & Trikes (ea)

$29.99

1046 Fits: ’86-’10 FLST Models (ea) $29.99

1046

Removing the heel shift lever is an easy task, but it leaves the unsightly shifter spline exposed. Our slick little chrome cover solves that problem quickly & inexpensively.

9072 Shifter Spline Cover, 1/2” I.D. (ea)

$11.99

The E-Z Brake puts the brake pedal on floorboard equipped H-D Models forward, in front of your foot. It gives you room to rest & move your foot, makes braking easier & safer, & gives your bike a great custom look.

9040 Fits: ’97-’07 Electra Glides, Road Glides, Street Glides, & Road Kings; & ’87-’99 FLST Models (ea)

$169.99


1070

1071

Patent Pending

The answer to more leg room on floorboard equipped H-D Models! Levers

move the location of the brake pedal pad forward & down while flattening the angle of

the pad. Now your foot is no longer “under” the brake pedal, resulting in easier & more natural braking. All

levers are beautifully polished & chrome-plated steel. They have a bronze bushing with a grease fitting for smooth

operation & long life.


1070 Extended Liberator Brake Pedal (ea)

$95.99

1071 Extended Girder Brake Pedal (ea)

$95.99

Our Extended Girder Shift Lever is the perfect complement to our Extended Girder Brake Pedal. With an 8” length, it’s about 1-3/4” longer than a stock Touring or FLST shift lever. It works as both front or rear on floorboard equipped Harleys. This chrome beauty will give you a lot of additional room on the floorboard.

Fits: Heel or Toe on ’83-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings, Trikes; & all ’86-’10 FLST Models

1026 Extended Girder Shift Lever (ea) $83.99

1045

9061

1027

1046

Fits: ’97-’07 Electra Glides, Road Glides, Street Glides, Road Kings; & ’87-’10 FLST Models

9061 Extended Brake Pedal (ea) $83.99

1027 Girder-Style Extended Brake Pedal (ea)

$95.99

Note: On ‘02-’07 Models, our Extended Brake Pedals provide only slightly more extension than stock, but the brake pedal pad is slightly lower & flatter, making the transition from board to brake more natural.

>> As a guideline, we suggest the Standard Controls (P/N 9063) for riders with a 33” or shorter inseam

Shown with Pilot Pegs, Stirrups & Brake Pedal Pad - Not Included

Kit Includes ISO-Brake Pedal Pad & ISO-Shift Peg - Not Shown

9063 9064

Our second generation forward controls. Several aesthetic & functional improvements were made to give you even more for your customizing dollar. The main components visually fit with existing shapes on the engine, primary, & frame. Flush, countersunk fasteners are used exclusively on mounting plates for a clean, uncluttered appearance. All ball joints, linkages, & visible hardware are also treated to a beautiful chrome finish. Igus shifter bearings provide smooth, maintenance-free operation. These controls offer outstanding good looks, are user-friendly, & provide excellent value in a moderate price range. Footpegs not included.

9063 Standard Forward Controls (ea) Fits: ’90-’10 Dyna

$399.99

9064 Extended Forward Controls (ea) Fits: ’90-’10 Dyna

$399.99

Note: Forward Controls are not compatible with most engine guards. Will not fit ’08-’10 FXDF, ’09-’10 FXDFSE, or ’10 FXDWG if equipped with stock exhaust.

Welcomed relief for tall Dyna Wide Glide riders. Move your stock forward controls a full 3” forward. The set includes extension plates, countersunk trim plates, linkages, & all hardware. All chrome components. Only basic hand tools are needed to complete this easy installation.

9062 Fits: ‘93-’02 FXDWG & any Dyna Models using H-D Forward Controls (P/N 49080-93A) (ea) $199.99

9049 Fits: ‘03-’08 FXDWG & any Dyna Models using H-D Forward Controls (P/N 49080-03 or 49080-06) (ea)

$199.99

Note: P/N 9049 will also fit ’08-’10 FXDF, ’09-’10 FXDFSE, or ’10 FXDWG if stock exhaust has been removed & replaced with a staggered dual system.

9049


CO

NT

RO

LS

Footpegs & Shift Lever Not Included

9041

M o r e O p t i o n s . . .

Pg 100

P/N 7887

If you’re a little taller than average & ride an FXST Model, Küryakyn has extended forward controls for you! Our beautifully sculpted, investment cast mounting plates are nicely polished & chrome-plated. This kit reuses the stock shift lever, splined shift shaft, brake pedal, & master cylinder. Includes an extended length braided stainless brake line & all necessary hardware. Accepts all H-D style male mount footpegs (sold separately).

Fits: ’00-’06 FXST Models

9041 Extended Forward Controls (set)

$459.99

ALSO AVAILABLE:PEGS PG 85GRIPS PG 62 MEDALLIONS PG 127SHIFT LINKAGE PG 110WINDSHIELD PG 188WINDSHIELD TRIM PG 125OIL FILLER CAP PG 150HI-FIVE MACH 2 PG 217SPEAKER GRILLS PG 118 SPUN BLADE AXLE CAPS PG 131BRAKE PEDAL PADS PG 85PASSENGER BOARD COVERS PG 156PASSENGER BOARD INSERTS PG 94SADDLEBAG LID COVERS PG 183SADDLEBAG LATCH ACCENTS PG 157SADDLEBAG MOUNT BRACKET ACCENTS PG 159LICENSE PLATE MOUNTING HOLE COVER PG 170

TRANSFORMERTM GRIPS WITH ZOMBIE EMBLEMS - PG 61

ZOMBIETM INFINITY HORN COVER - PG 142

ZOMBIETM MIRRORS & LEVERS - PGS 72 & 78

ZOMBIETM TAILLIGHT COVER

PG 164

ZOMBIETM FLOORBOARD COVERS - PG 94


Tank & Dash

Front End

Engine

Rear End

License Plates


3789

3789

3781

3783

3782

N o w A v a i l a b l e . . .

You’re in luck! We’ve added to our already staggering collection of Cockpit Chrome. A new Stereo Accent,

Inner Fairing Accent & Speaker Grills! See Pg 11

P/N’s 3793, 3794, 3765, & 3766

Crank it up! While you’re enjoying great travelin’ tunes, add some visual punch to your speakers. With these trick grills, your

speakers will look as good as they sound!

Fits: Fairing speakers on ’96-’10 Electra Glides, Street Glides, & Trikes

3787 Zombie (pr) Patent Pending $29.99

3788 Flame (pr) Patent Pending $29.99

3789 Widow(pr) $29.99

3790 Chauvinist (pr) $29.99

Patent Pending

Here’s a sweet looking accent you can enjoy every time you’re in the saddle! A great addition to either H-D or Küryakyn chrome gauge bezels, this trim places an attractive chrome frame around the ignition & the adjacent control switches. Besides being serious eye candy, the smooth chrome surface is much easier to keep clean than the stock matte finish. Simple peel-&-stick installation requires no tools or disassembly.


3783 Switch Panel Accent (ea) $49.99

These elegant Gauge Bezels blend beautiful chrome rings with tasteful, colored accents. The rubber-like accent is captured by the press-on chrome ring. Each pair of bezels includes black, red, & blue accents giving the rider options at the time of installation to select the color that best complements their motorcycle’s paint scheme.

3781 Large Deluxe Gauge Bezels with Colored Accents (pr) Fits: ’00-’10 Electra Glide, Road Glide, Street Glide , & Trikes speedometers & tachometers

$59.99

3782 Small Deluxe Gauge Bezels with Colored Accents (pr) Fits: ‘86-’10 Electra Glide, Road Glide , Street Glide , & Trikes voltmeter, oil pressure, air temp, & fuel gauges

$39.99

3782

3788

3787 3790

Forget about run-of-the-mill gauge bezels… this kit totally transforms the appearance of the Road Glide speedometer, tach, & fork nacelle. The main cover envelops the gauges

& indicator lights with an elegantly sculpted shroud while the four individual accent pieces decorate the edges of the nacelle. Simple installation for an instant transformation!

Fits: ‘98-’10 Road Glides

3780 Nacelle Accents for Road Glide (set) $129.99


CH

RO

ME

3791

3769

3780

Gauge Bezels pg 120

Patent Pending

Plain black mesh speaker covers were pretty boring until now! Our new Speaker Grills install in minutes & bring the stock covers to life, while giving you the opportunity to add your own personalized touch. The round Three Spoke Insert can easily be substituted with our Chauvinist (P/N 3784), Illiana (P/N 3768), or Twin Ring (P/N 3785) 2” Gauge Bezels (sold separately - pg 120).


3791 Speaker Grills for Road Glide (pr)

$49.993769

3791

Patent Pending

At first glance you’ll notice the difference; glove box doors that stand out instead of disappearing into the flat black background. But besides the great look, this striking chrome trim also provides a finger catch to make opening the doors a snap - even with gloves on!


3769 Glove Box Accents for Road Glide (pr)

$49.99

Easily affixes to the speedometer. Besides the sleek appearance, you’ll really appreciate the reduction in glare if you run a windshield!

Fits: Speedometers & tachometers with a 3-3/4” O.D. & 7/16” exposed side wall. Fits perfectly on Road Glides, ‘04-’10 Sportster Customs, & many other bikes

4015 Speedo/Tach Visor (ea) $25.99

Dress up your speedo easily & affordably with our great looking bezel! Completely cover

the stock stainless steel bezel.

Fits: ’68-’10 H-D Models with Large FL-Style Tank-Mounted Speedo (FLH, FXWG, Softails, Dyna Wide Glide, ‘94-’07 Road Kings

112 Speedometer Trim Ring with Visor (ea)

$25.99

A simple custom cover that will make a huge difference.

Fits: ’93-’03 Dyna Wide Glides, & all ’00-’10 Softails (except ’00-’07 Deuce, ’05-’06 FLSTFSE, ’07-’09 FXSTSSE, ’08-’10 Rocker/C, ’08-’10 FLSTSB, & ‘09-’10 FLSTC)

1522 Dash Panel Insert (ea) $103.99

3785


3784

3768

Plain chrome gauge bezels are great if your taste is more vanilla than exotic. But what if you & your bike have a little

more flair? Our new Gauge Bezels offer the spice that appeals more to the gourmet. Three selections are available to please

the more discerning custom palate. Although they’re a little more upscale, the peel-&-stick installation is still simple.

Fits: ’86-’10 volt meter, oil pressure, air temp or fuel gauge on Electra Glides, Tour Glides, Road Glides, Street Glides, & Trikes

3784 Chauvinist (pr) $19.99

3785 Twin Ring (pr) Patent Pending $19.99

3768 Illiana (pr) Patent Pending $19.99

This sculpted, chrome Dash Panel Insert is a huge improvement over the generic, rough cast finish dash Road Kings come with. Beveled openings for indicator light & the ignition switch evoke a recessed “frenched in” look. Using only two fasteners, you can make the leap from ho-hum to WOW in minutes!

Fits: ‘94-’07 Road Kings (except ‘04-’07 FLHRS & ‘07 FLHRSE)

1520 Dash Panel Insert for Road King (ea) $135.99

This cleverly designed mount replaces the stock hinged fuel door to provide a stable & easily accessible place to mount a GPS, satellite radio, or other personal electronic device. The swap only takes a few minutes. The bracket angle is easily adjustable & accepts almost any device that utilizes a cradle with the industry standard 4-hole AMPS pattern. Also accepts items like MP3 players, cell phones, or just about anything with a belt clip.

1465 Fits: ‘92-’07 Electra Glides, Road Glides, Street Glides & Tour Glides $103.99

1466 Fits: ‘08-’10 Electra Glides, Road Glides , Street Glides, & Trikes $103.99

Note: Always ensure that installation of the electronic device will not interfere with handlebar movement.


CH

RO

ME

Fumbling with your keys in the dark while trying to get your gas door open is not anyone’s idea of fun. Add our Push Button Fuel Door Latch & make getting to the gas cap easy! It’s a direct replacement for the stock key-lock fuel door latch.

Fits: All ’92-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, & Trikes

1467 Push Button Fuel Door Latch (ea) $29.99


Stock gas caps do a good job of keeping gas in the tank, but as far as style goes, they look like refugees from Grandpa’s Buick.

These slick Flush Mount Gas Caps have the high-tech look of aviation-style fuel fillers. The built-in trim ring protects the painted surface around the filler opening from dings & gas stains. A keyed entry system permits their ultra thin profile & prevents tampering. No cutting required.

Fits: All H-D screw type tanks from ‘82-’10

8309 Flush Mount Gas Cap (R.H. Thread) - Vented (ea) $49.99

8310 Flush Mount Gas Cap (L.H. Thread) - Non-Vented (ea) $49.99

8311 Replacement Key for 8309 & 8310 (ea) $4.99

Sometimes they get lost, sometimes they get stolen, & sometimes they just wear out. Vented or non-vented, these chrome-plated gas caps are a fraction of the cost of stainless steel caps.

Fits: All H-D screw type tanks from ‘96-’10

8667 Peaked Low Profile Gas Cap (R.H. Thread) - Vented (ea) $25.99

8668 Peaked Low Profile Gas Cap (L.H. Thread) - Non-Vented (ea) $25.99

8669 Stock Style Gas Cap (R.H. Thread) - Vented (ea) $14.99

8670 Stock Style Gas Cap (L.H. Thread) - Non-Vented (ea) $12.99

8671 Domed Low Profile Gas Cap (R.H. Thread) - Vented (ea) $25.99

8672 Domed Low Profile Gas Cap (L.H. Thread) - Non-Vented (ea) $25.99

8671

8667

8669


U.S. Patent 7,652,563

A perfect match to our Flush Mount Gas Cap, The Informer’s sleek, low profile design incorporates both an L.E.D. fuel gauge & an L.E.D. battery gauge.

A daylight sensor automatically adjusts the brightness of the L.E.D.’s. The fuel gauge has a string of color coded L.E.D.’s to indicate fuel level.

When full, a single green L.E.D. will be illuminated at the right end of the string. When the tank is virtually empty, a single red L.E.D. will flash at the left end of the string. Red L.E.D.’s appear from empty to 1/8 tank, amber L.E.D.’s appear from 1/4 to 1/2 tank, & green L.E.D.’s appear from 5/8 to full.

Our patent pending design allows the rider to select the fuel level at which the red “empty” L.E.D. illuminates. The stock float & sending unit are notoriously inconsistent & often contribute to inaccurate

readings at the gauge. Want the gauge to read empty when the bike is on fumes? No problem. Want the gauge to read empty when there

is still a gallon left in the tank? No problem, the choice is up to you.

The Battery Gauge is an array of L.E.D.’s that indicate the operating voltage of the bike’s electrical system. Green L.E.D.’s represent the normal, safe

operating range of your charging system, 12.5v to 14.5v Amber L.E.D.’s warn the rider that the bike is not charging. If the reading drops below 10v or exceeds

15v, a flashing red L.E.D. will alert the rider.

Fits: Replaces stock fuel guage on ‘94-’07 Road Kings, ‘00-’07 Softails, & ‘91-’08 Dynas

8375 Informer L.E.D. Fuel & Battery Gauge (ea) $124.99

Protection & beauty to keep debris from getting into your Road King’s fork lock mechanism at an affordable price.

Fits: All ’94-’10 Road King Models

1513 Fork Lock Cover for Road King (ea)

$39.99

Note: It may be necessary to modify key slightly to operate lock mechanism.

With its dull industrial finish, a stock gas valve is hardly a thing of beauty, but to replace it with a trick aftermarket unit could cost up to a hundred bucks. A large hex knob provides easy operation. Installation is a snap, & costs about a third of custom replacement valves.

Fits: ‘81-’01 stock H-D petcocks

2011 Chrome Petcock Cover (ea) $29.99

Add sizzle to Sportster fuel tanks with these show-chromed mounting tab covers. Specially designed chrome fasteners blend with the tab covers to complete the installation & hold all components securely in place.

Fits: Stock ‘96-’03 XL fuel tanks

1508 Tank Tab Trim (set) $41.99

Our choke knob cover installs neatly over the stock black plastic unit. Not only does it look 100% better, it’s easier to find & get a hold of!

Fits: All ’88-’06 XL Models & ’90-’06 Big Twin with stock carburetors

2009 Marquis Choke Knob Cover (ea) $29.99

Cover up the plumbing on your fuel injected bike with this two-piece streamlined beauty.

Fits: ’01-’10 fuel injected Softails, ’02-’10 fuel injected Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes, ’04-’10 fuel injected Dynas, & ‘07-‘10 fuel injected Sportsters

1521 Fuel Line Fitting Cover (ea) $41.99

1535 Replacement O-rings (pr) $5.99

A little trim goes a long way. Place this three-dimensional trim plate at the bottom of the Road King dash for a sleeker, more finished look. Easily installed in only minutes.

Fits: ’94-‘07 Road Kings (except ’04-’07 FLHRS & ‘07 FLHRSE)

1518 Dash Trim for Road King (ea) $19.99


CH

RO

ME


A

E

FD

B

C

S T R E E T G L I D E — F R O N T E N D

Accent the transition from bike to windshield while adding attitude. Choose between Zombie or Eagle styles. These swooping accents are beautifully chrome-plated & are simple to install.

Fits: ‘96-’10 Electra Glides , Street Glides, Trikes, Küryakyn Airmaster Fairing

1199 Eagle Windshield Trim (ea) $69.99

1198 Zombie Windshield Trim (ea) $69.99

1189 Replacement Emblem for Zombie Windshield Trim (ea)

$10.99

1369 Windshield Mounting Spikes, 1/4-20 x 5/8” (set/3)

$19.99

U.S. Patent 7,637,520

One of the most notable features of the big H-D touring rig is the big burley front end. What a shame that the lower legs & brake calipers come from the factory with polishing imperfections & such an uninspiring dull finish! This innovative kit provides

an easy, low cost way to put a flawless chrome finish on the lower legs (from the fender mounting bosses down) & the brake calipers with no need to dismantle

the front end! Constructed of beautifully chromed stamped steel for a long & beautiful life.

8630 Fits: ’00-’07 Electra Glides, Road Glides, Street Glides & Road Kings (set)

$279.99

8631 Fits: ’08-’10 Electra Glides, Road Glides, Street Glides, & Road Kings without ABS (set) Note: This set does not include Caliper Covers.

$199.99

You’d be amazed at the amount of time, materials & labor required to simply replace the stock stainless fork slider covers with chrome ones. Our new Upper Fork Slider Covers provide the same shimmering chrome finish, but install in only minutes over the stock covers - no need to disassemble the front end! Want to really look sharp? Use these along with our Chrome Lower Leg Accents (P/N 8630 or 8631).

Fits: ’96-’10 Electra Glides & Street Glides

8635 Upper Fork Slider Covers (set) $129.99

D R A G O N W I N G S / p g 1 9 0 / # 1 1 1 7

F O R K M O U N T E D D R I V I N G L I G H T S / p g 4 4 / # 5 0 0 8

H . I . D . L I G H T I N G / p g 4 0 / # 2 2 5 3


CH

RO

ME

C

A

B

D

F

E

What do a supermodel & a Road Glide fairing have in common? They both look terrific when their soft contours

are highlighted! OK, a hot bikini will probably get more looks, but this new Fairing Trim does make the most

out of the sleek lines of this bike. This curvaceous chrome molding installs easily with high-strength peel-&-stick adhesive, & the integrated L.E.D. supplemental run/turn lights simply plug into

existing wiring.


8649 Fairing Trim for Road Glide (pr)

$139.99


1371

8649

8649

1370

1371

Long, lean, & mean! That’s the illusion your stock headlight shell will get by adding this slick Headlight Visor. Features a nicely finished rolled front edge with center bullet -a big difference that will

be noticed immediately. Fastens securely to your existing headlight for easy installation!

Fits: All H-D Models with 7” headlight

2182 Headlight Visor for 7” Headlight (ea) $31.99

Note: Does not fit with H-D Accessory Trim Rings.

Make a clean transition. This handsome three-piece trim set provides a smooth, flowing bridge from the fairing to the windshield. Available either in plain smooth chrome, or with interchangeable emblems to blend with accessories featuring the Zombie or Maltese Cross theme.


1370 Windshield Trim for Road Glide (ea)

$129.99

1371 Deluxe Windshield Trim for Road Glide (ea)

$145.99

Let your front fender take on a new life with one of our majestically sculpted fender ornaments.

9022 Wild Boar Fender Ornament (ea) $49.99

9026 Eagle Fender Ornament (ea) $45.99

3103 Replacement Bulb, #161 (ea) $1.99

These fender tips add a nostalgic touch to any bike in seconds! Models are available to fit most OEM H-D fenders. Simple installation requires no drilling & can be done without any tools. A great way to cover dinged fender tips.

9012 Fits: Narrow H-D Front Fenders on FXST, XL, FXDWG, Dyna, & FXR Models (Leading Edge) (ea)

$29.99

9013 Fits: ‘90-’10 Fat Boy Front Fenders (Leading Edge) (ea)

$29.99

9014 Fits: ‘90-’10 Fat Boy Front Fenders (Trailing Edge) (ea)

$29.99

9015 Fits: ‘90-’06 Fat Boy Rear Fenders (except ‘06 FLSTFSE) (ea)

$29.99

This unique design embeds custom emblems in a bold chrome grill. Choose from Zombie, Maltese

Cross, or grooved styles. Each easy-to-install set includes both front & rear lens grills.

Fits: ’80-’08 Electra Glides, Tour Glides, Road Kings & ’86-’10 FLST Models with front & rear fender tip lights

8606 Zombie Fender Tip Lens Grills (pr) $34.99

8607 Maltese Cross Fender Tip Lens Grills (pr) $34.99

8608 Grooved Fender Tip Lens Grills (pr) $34.99

The clean, unadorned fenders on the Road Glide, Road King Custom, Street Glide & many CVO Screamin’ Eagle Touring Models look sharp, but could use a little flash. Our classy fender tips are the perfect chrome complement to these clean fenders.

Fits: ’06-’10 Street Glides, ’98-’10 Road Glides, ’10 Street Glide Trikes, ’04-’07 Road King Customs, ’04-’05 FLHTCSE, ’06-’10 FLHTCUSE, ’02-’03 & ’08 FLHRSE

8642 Front Fender Accent - Leading Edge (ea) $29.99

8643 Front Fender Accent - Trailing Edge (ea) $29.99

Keep a bunch of little Zombies with you wherever you are. Stick them on your motorcycle, toolbox, car, computer monitor—anywhere you think their sinister faces will brighten your day. Just peel off the backing & fasten them onto…whatever! Leave a trail of Zombies & you’ll always find your way home.

1491 Large Zombie (Requires 2” of flat surface for mounting) (pr) Note: Replacements for Küryakyn Saddlebag Latch Accents (P/N 1595)

$15.99

1492 Small Zombie (Requires 1” of flat surface for mounting) (pr) Note: Replacements for Küryakyn P/N’s 1047, 1058, 1060, 7520, 7521, & 8606

$14.99

Note: See additional Medallions on pg 24.

8642


CH

RO

ME

M a k e i t a S e t . . .

You’ve gotta look good coming & going! See Pg 159

P/N 8640 & 8641

8606

9012

9013

8608

8607

®

The Küryakyn Wide Glide Fork Brace securely ties the fork sliders together for a more rigid, smoother operating front end. By reducing fork flex, one can enjoy more aggressive, controlled cornering, smoother ride, & straighter, more predictable hard stopping. Aside from being one of the more functional accessories available, this is also a sweet looking item.

8620 Fits: 41mm Wide Glide Front Ends found on ’80-’85 FXWG, ’93-’05 FXDWG, & ’85-’10 FXST Models (except Springer, Deuce, Rocker/C) (ea)

$155.99

8600 Fits: ’00-’07 Deuce (ea) $129.99

These unique accents cover the entire profile of the brake caliper while deviating from the standard round style caliper insert.

1291 Front Caliper Cover (ea) Fits: All ’84-’99 Models & ‘00-’07 FLSTS/FLSTSC/FXSTS

$20.99

1293 Rear Caliper Cover (ea) Fits: All ’87-’99 Models except Dressers or Road Kings

$22.99

Used by themselves, or as a complement to our other caliper accessories, these little jewels transform the unfinished bleeder screws & banjo bolts on stock H-D calipers into glistening chrome.

Bleeder Screw Covers Fit: All ’84-’10 stock H-D calipers (except ‘08-’10 Touring)

2018 Bleeder Screw Cover (ea) $10.99

2013 Bleeder Screw Cover (pr) $19.99

2014 Banjo Bolt Cover (ea) Fits: ‘84-’10 H-D master cylinder & calipers (except ‘08-’10 Touring master cylinder & caliper, ‘08-’10 Softail & Dyna calipers & ‘04-’10 XL master cylinder & caliper)

$15.99

2018

1291

1293

1291

2014

20182014


8620

8632

Perfection lies in the details. Our Chrome Riser Bolt Covers conceal your stock zinc plated riser bolts.

Fits: Covers hex head of 1/2” riser mounting bolt

8126 Riser Bolt Covers (pr) $17.99

Available individually or as a set.

Fits: ’87 to ’96 Softails (except Fatboy) & ’93-’96 Wide Glides

8134 Chrome Speedo Drive Cover Fits all Models to ’95 (except 39mm front ends) (ea)

$15.99

8142 Hub Filler & Speedo Drive Cover (set) $39.99

8135 Speedo Drive Cover for 39mm Narrow Glide Front Ends (ea)

$13.99

It’s every hard-working caliper’s dream to go first class in luxurious, contoured chrome. These Caliper Skins give your bike the look of high-tech 6-piston calipers without the expense, plus make it a lot easier to keep the caliper area clean. The 2-piece clamshell design makes this cover easy to install.

1285 Caliper Skins (pr) Fits: ‘00-’05 Dressers & Road Kings without rotor covers

$103.99

1286 Caliper Skins, Left (ea) Fits: ’00-’07 Softail Models (except FXSTS, FLSTS, FLSTSC), ’00-’07 Dyna Models (except those with 19” laced wheel option), ’00-’03 Sportster Models (except XL883C, XL1200C, & those with 19” laced wheel option), & ’02-’05 V-Rod

$72.99

1287 Caliper Skins, Right (ea) Fits: ‘00-’05 FXDX, ‘01-’03 FXDXT, ‘00 FXDL & FXDS, ‘00-’03 XL1200S, ‘02-’03 XL883R, & all ‘02-’05 V-Rod

$72.99

Note: When installing caliper skins check for clearance with valve stems. Lengths & location of valve stems will vary.

On-Bike Shown with our Banjo Bolt Cover (P/N 2014) & Brake Bleeder Screw Cover (P/N 2018) (Sold separately - pg 128).

8633


CH

RO

ME

D o n ’ t M i s s T h i s . . .

Got a Touring Model & want to chrome out your forks? We didn’t forget about

you! See Pg 125

P/N 8630

On-Bike Shown with Bullet Covers for Banjo & Bleeder Screw (Sold separately - pg 134).

Everyone loves the look of a deliciously chromed front end. But until now, the time, labor, & expense of chroming FLST lower fork legs made this option much less tempting. Küryakyn Lower Leg Covers make this upgrade quick, easy, & affordable. Stylized stamped steel covers simply bolt securely into place right over the stock lower legs! The version for ’00-’07 Models also includes a matching caliper cover. You’ll have a classy shining look in no time & plenty of cash left in your wallet!

8632 Fits: ‘86-’99 FLST Models (except Springer) (pr)

$169.99


$169.99


$169.99

These sleek axle caps blend nicely with virtually all H-D front forks. These fit up close to the sliders with no unsightly gaps.

1201 Fits: ’84-’06 Softails (except Deuce & Springer), ’80-’99 Electra Glides, Road Glides, Tour Glides & Road Kings, ’91-’03 Dynas with 39mm forks, ’93-’05 FXDWG, ’88-’07 Sportsters, ’88-’00 FXRs, ’80-’86 FXWG (pr)

$24.99

1213 Fits: ’00-’07 Electra Glides, Road Glides, Street Glides & Road Kings, ’04-’07 Dynas (except ’04-’05 FXDWG & ‘07 FXDSE) (pr)

$25.99

1214 Fits: ’07-’10 Softails (except Deuce, Springer & Rocker ), ’08-’10 Electra Glides, Road Glides, Street Glides & Road Kings, ’08-‘10 Dynas (except ’08 FXDSE), ’08-’10 Sportsters, ‘02-’10 V-Rod (except VRSCR & VRSCF) (pr)

$25.99

Patent Pending

Here’s a new twist on an old favorite! These eye-catching Axle Caps bring new life to dull, unfinished stock axle ends.


$59.99

1218 Fits: ’00-’07 Electra Glides, Road Glides, Street Glides & Road Kings, ’04-’07 Dynas (except ’04-’05 FXDWG & ‘07 FXDSE) (pr)

$59.99

1219 Fits: ’07-’10 Softails (except Deuce, Springer & Rocker ), ’08-’10 Electra Glides, Road Glides, Street Glides & Road Kings, ’08-‘10 Dynas (except ’08 FXDSE), ’08-’10 Sportsters, ‘02-’10 V-Rod (except VRSCR & VRSCF) (pr)

$59.99


86258629

A chromed front end at a fraction of the cost! Add up the related costs of actual plating, new seals, new fork oil, axle caps, chrome hardware, labor, & (to keep this comparison accurate) a chrome fork brace, the final bill is realistically around $450. Our Fork Skins will chrome out 39mm or unshrouded 41mm front ends & provide the improved handling associated with a fork brace. This kit is extremely quick & easy to install. Only a few wrenches & about 20 minutes is needed to transform the ordinary to the spectacular. Fork Skins fit 39mm front ends found on FXR, Dyna, XL, & unshrouded 41mm front ends on FXST (except Deuce) & FXDWG Models.

8622 Fits: ’04-’07 Sportster with 39mm Single Disc Front Ends (set)

$189.99

8625 Fits: ’88-’99 Single Disc 39mm Front Ends (set) $199.99

8623 Fits: ’00-’03 Single Disc 39mm Front Ends (set) $199.99

8629 Fits: ’00-’06 41mm Wide Glide Front Ends (set) $199.99

Aggressively styled, these axle caps let everyone know who’s the boss. By themselves or coupled with other accessories from the Stiletto line, these axle caps are killer! Three styles are offered to fit most H-D Models.


$69.99

1206 Fits: ’00-’06 Deuce (pr) $59.99

1212 Fits: ’00-’07 Electra Glides, Road Glides, Street Glides & Road Kings, ’04-’07 Dyna (except ’04-’05 FXDWG & ‘07 FXDSE) (pr)

$72.99

Functional & classy! By adding this chromed front fender extension, you’ll enjoy a dryer ride in the rain, a cleaner engine, & a subtle hint of sparkle. A molded-in contour hugs the stock H-D narrow fender tightly for a look so clean you’d swear it was part of the original fender!

Fits: Narrow H-D front fenders on FXST, XL, FXDWG, Dyna & FXR Models

9016 Front Fender Extension (ea) $39.99


CH

RO

ME

Reminiscent of the great Mustang fighter planes, these spinning blades give the illusion of flight. The chrome-plated ABS blades start to spin when the bike reaches about 25 mph. Choose either a pointed center cap or a Zombie center cap to add an additional cool factor to your bike.


$99.99


$99.99

1234 Fits: ’07-’10 Softails (except Deuce, Springer & Rocker), ’08-’10 Electra Glides, Road Glides, Street Glides & Road Kings, ’08-‘10 Dynas (except ’08 FXDSE), ’08-’10 Sportsters, ‘02-’10 V-Rod (except VRSCR & VRSCF) (pr)

$99.99


$99.99


$99.99

1237 Fits: ’07-’10 Softails (except Deuce, Springer & Rocker), ’08-’10 Electra Glides, Road Glides, Street Glides & Road Kings, ’08-‘10 Dynas (except ’08 FXDSE), ’08-’10 Sportsters, ‘02-’10 V-Rod (except VRSCR & VRSCF) (pr)

$99.99


Here’s a beautiful cover for an ugly motor mount. Easy 2-bolt installation means you’ll be stylin’ in no time.


1545 Motor Mount Cover for Dyna (ea) $62.99


A complete cover for your stock voltage regulator. Two-piece design uses a stamped steel base & a chrome composite top. Open & well-vented design keeps your regulator running cool. Two functional & decoratively shaped chrome fasteners add the finishing touch.

Go ahead & light ‘er up! The open & vented design looks awesome when lit from the inside! We’ve left plenty of room inside to hide a Super Lizard Light or an L.E.D. Accent Light.

Fits: ’97-’10 Electra Glides (except ’04-’05 FLHTCSE, ’06-’10 FLHTCUSE, ’10 FLHTK), ’98-’10 Road Glides (except ’09 FLTRSE), ’06-’10 Street Glides (except ’10 FLHXSE), & ’97-’10 Road Kings (except ’03, ’07-’08 FLHRSE)

1547 Regulator Cover (ea) $79.99

A stock voltage regulator normally fades into the background, but with this sharp

Voltage Regulator Cover it will be right in the spotlight! Deep fins & beautiful chrome, it really

stands out! Besides looking great, the smooth finish is much easier to keep clean & liberal venting

lets it keep its cool. Installation? Simple – two bolts & you’re stylin’!

Fits: All ’01-’10 Softail Models

7839 Regulator Cover for Softail (ea) $69.99

7772

7897


CH

RO

ME

7897Engineered to shroud the lower portion of your bike frame, these distinctive chrome-plated covers hide the kickstand assembly, front engine stabilizer & the footboard mount. Instantly simplifies a usually unsightly area of the bike.

7897 Fits: ’91-’08 Touring Models without fairing lowers or oil coolers (Electra Glide Standard & Classic, Tour Glides, Road Glides, Street Glides, Road Kings) (ea)

$69.99

7772 Fits: ’91-’10 Touring Models with Fairing Lowers &/or Oil Coolers – FLHTCU, FLHTK, FLTCU, FLHTCUTG, FLHXXX, ’03 & ’07-’08 FLHRSE, ’04-’05 FLHTCSE, ’06-’10 FLHTCUSE (ea)

$69.99

7772

Patent Pending

Arresting good looks without putting the brakes on your budget! This custom overlay puts a stylized chrome & black profile on the stock rear brake arm. High strength peel-&-stick adhesive allows fast, easy installation with no tools. Think of all the other cool accessories you can add to your bike with all the money saved by not replacing the entire control!

Fits: ’02-’10 Electra Glides, Road Glides, Street Glides, Road Kings, Trikes & ’02-’10 FLST Models

8652 Brake Pedal Arm Cover (pr) $59.99

These louvered chrome covers will stylize those unsightly front & rear reflectors while heightening visibility.

Fits: Front Downtubes: All ’92-’08 H-D Touring Models (Electra Glides, Road Kings, etc.), all ’91-’99 Softail Models, & all ’91-’99 Sportster Models

Other motorcycles with reflectors that are 3-5/16” by 1-1/4” or smaller with 1/4” of clearance around the reflector

9001 Chrome Reflector Covers (pr) $19.99

For areas that need a little extra shine.

1230 Small Bullet Covers (ea) Fits: 12mm 12-point screws found on ’00-’10 H-D brake calipers/caliper mounts & bleeder screws found on ’00-’07 H-D calipers (also covers any 7/16” hex bolt or nut)

$15.99

1231 Bullet Banjo Fitting Covers (ea) Fits: Brake caliper banjo fitting on ’00-’07 H-D brake calipers & rear brake master cylinder banjo fitting on ’99-’07 Touring Models & ’00-’07 Softails

$16.991231

9128


Exchange the dull finish on your XL master cylinder with stunning, beautiful chrome by using our Rear Master Cylinder Cover.

Fits: ’84–’03 XL Models

9127 Rear Master Cylinder Cover for XL (ea)

$41.99

One-piece, die-cast chrome cover that fits cleanly over the stock lid so there’s no chance of annoying leaks.

Fits: ’99-’07 Electra Glides, Road Glides, Street Glides, Road Kings & ’00-’10 Softails

9128 Rear Master Cylinder Cover (ea) $49.99


Here’s a great example of how details make the difference! The stock oil pressure switch is so plain looking it’s conspicuous. The simple addition of this finely sculpted chrome Oil Pressure Sender Cover complements other chrome pieces on the engine & adds life to the dull cast finish surrounding it.

8655 Fits: ’07-’10 Electra Glides, Road Glides, Street Glides & Road Kings, ’00-’10 Softails & ’06-’10 Dynas (ea)

$69.99

8651 Fits: ’99-’06 Road Kings (except ‘03 FLHRSE & ‘00-’06 FLHT Standards (ea)

$49.99

Patent Pending

Combine the legendary stopping power of Brembo brakes with the arresting style of Küryakyn & you get our Rear Master Cylinder Covers! The super clean one-piece design covers everything – even the small related components. Simple, quick installation uses only two fasteners.

8653 Fits: All ’08 Touring Models & All ’09-’10 Touring Models & Trikes WITHOUT Fairing Lowers

$59.99

7769 Fits: All ’09-’10 Touring Models & Trikes WITH Fairing Lowers

$62.99

8655

8655

8651

8653

8653

By popular request! Hundreds of you asked us to develop these for the Softail when you saw the ones we made for the baggers. Snap-on installation makes this an easy way to chrome the front frame down tubes.

7843 Fits: ‘92-’99 Softail Models (set) $59.99

7853 Fits: ‘00-’06 Softail Models (set) $59.99

7863 Fits: ‘07-’10 Softail Models (except Rocker/C) (set) $59.99

Patent Pending

Hmmm... tough decision here – black rubber hose á la corrugated plastic & bare hose clamps, or a fine chrome cover that hides everything? This should be a no-brainer. The Küryakyn Fuel Tank Cross-Over Line Cover goes on in minutes, is easy to keep clean, easy to work with, & nothing else available will look this sweet!

Fits: ’95-’07 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings

8673 Fuel Tank Cross-Over Line Cover (ea)

$39.99

Our unique, die-cast chrome covers follow the contour of the tank & wrap over the top of the frame where sculpted ports allow wires & cables to pass through where necessary.

Fits: ’00-’06 FXST Standard & Night Train (Does not fit Deuce)

8175 Neck Cover for Softail (set) $79.99

7853

A f t e r c o m p l e t i n g n e c k c o v e r i n s t a l l a t i o n ,

t u r n h a n d l e b a r s s i d e - t o -s i d e t o e n s u r e t h a t n o

w i r e s o r v e n t h o s e s a r e b e i n g p i n c h e d .


CH

RO

ME

8163

7853

Masking the roughly finished forged frame neck on a Twin Cam Softail is now as easy as two screws & a few minutes of your time. We’ve designed smooth & cleanly contoured stamped steel neck covers to work on Softail Models equipped with fork tins (Heritage, Fat Boy, etc.) & Deuces. These beautifully chromed covers mask the wiring, giving your bike’s neck a finished appearance.

7854 Fits: ‘00-’07 Deuce (set) $93.99

7831 Fits: ‘86-’99 FLSTC, FLSTF, FLSTN (set) $89.99

8163 Fits: ‘00-’06 FLST, FLSTC, FLSTF, FLSTN (set) $83.99

7833 Fits: ‘07-’10 FLSTC, FLSTF, FLSTFB, FLSTN (set) $79.99

Note: These covers do not fit FLSTS, FLSTSC, or FLSTSB Models.

Designed from a clean sheet, our neck cover is a smooth, quickly installed addition to any H-D Touring Model. The right side cover has been enlarged enough to accommodate the in-line cruise control pull-off switch found on the idle cable of all ’02-’05 Models.

The basic kit is offered in chrome or black & contains two-pieces to shroud the neck & extend down the frame adding brilliance to an otherwise dull area. The Deluxe Kit adds two snap-on downtube covers to add coverage almost all the way to the footboard

mounts. Easy to install & great looking, this is a truly first class part!

Fits:’95-’05 Electra Glides, Road Glides, Tour Glides & Road Kings

8146 Deluxe Neck Covers (set) $169.99

8168 Neck Covers, Chrome (pr) $155.99

7864 Neck Covers, Black (pr) $155.99

8227 Snap On Tube Covers (updates P/N 8168 to P/N 8146) (pr)

$49.99

8146

8168


8168

7866

7866

Patent Pending

Just the right touch of edge & functionality. Hide those welds & wires near the neck of your bike in one quick & easy step. The deluxe set includes

upper covers & down tube covers. A two-piece set is offered in gloss black.

U.S Patent D591,207

7866 Chrome Deluxe Neck Covers (set) Fits: ’95-’07 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings

$199.99

7799 Painted Black Chrome Deluxe Neck Covers (set) Fits: ’95-’07 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings

$208.99

7865 Fits: ’95-’07 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings (pr)

$176.99


CH

RO

ME

7834

7832

7834

We developed this stylized chrome cover to put a visually pleasing face on this beefy section of the Dyna frame. Welds, square edges, joints & wires are neatly hidden from view. The neck cover’s contours complement the shape of the fuel tank & the added glint of vibrant chrome looks great with any paint job!

Fits: ‘06-’10 Dyna Models (except ‘06-’08 &’10 FXDWG)

7836 Neck Covers for Dyna (set) $145.99

Patent Pending

Masking the unfinished look of welds & wires with flair & ease! These Deluxe Neck Covers ensure your bike will get a second look.

7834 Fits: ’08 Electra Glides, Road Glides, Street Glides & Road Kings (set)

$199.99


$199.99

A M I D - F R A M E C O V E R / p g 1 5 2 / # 8 2 3 9

B S T A R T E R C O V E R / p g 1 5 1 / # 7 8 4 7

C S A D D L E S H I E L D S / p g 1 9 1 / # 1 1 8 8

D T R A N S M I S S I O N S H R O U D S / p g 1 4 5 / # 7 8 7 7

E R E A R C Y L I N D E R B A S E C O V E R / p g 1 4 5 / # 8 3 9 4

F T A P P E T B L O C K A C C E N T / p g 1 4 0 / # 8 3 8 9

G C H A S I N G L . E . D . T I M I N G C O V E R / p g 1 4 0 / # 1 3 0 2

H R E A R M A S T E R C Y L I N D E R C O V E R / p g 1 3 4 / # 9 1 2 8

I C L U T C H C A B L E A D J U S T E R / p g 7 4 / # 2 0 1 7

J P E A K E D R O C K E R B O X B O L T C O V E R S / p g 1 4 3 / # 8 3 7 2

K D E L U X E N E C K C O V E R S / p g 1 3 6 / # 7 8 6 6

A

B

C

D

E

F

G

H

I

J

K

C

A

B


S T R E E T G L I D E — E N G I N E

F

E

D

K

G

J

I

H


CH

RO

ME


Take the blues away with this perfectly designed heat shield. Quickly & easily installed, this piece integrates seamlessly & bridges the ugly gap left between the stock heat shields.

Fits: ’93-’08 Electra Glides, Road Glides, Tour Glides, Street Glides & Road Kings with stock head pipes & heat shields

9196 Bridge the Gap Heat Shield (ea)

$39.99


8389

8389


So clean & so simple! Nothing could be easier than to add this cover to your exposed engine case. Its chrome style accents the stock tappet blocks & makes a big difference.

Fits: All ’99-’10 Twin Cam Engines

8389 Tappet Block Accent (ea) $69.99

Note: Not compatible with Küryakyn Tappet Block Covers (P/N 8230).


Like a window into your motor’s soul, the mesmerizing effect of the chasing lights moving in rhythm with engine speed give life to the heart of your bike. Select red, lime, ice blue, sky blue, dark blue, purple or

green, or hues fading continuously from one to the next, spinning circles timed by engine RPM’s. Or if desired,

single or continuously changing colors may be lit solidly. This easily installed kit contains chrome timing cover with

multi-function L.E.D.’s, wiring & controller.

Fits: All ‘84-‘99 Evolution Big Twins, all ‘99-‘10 Twin Cams

1302 Chasing L.E.D. Timing Cover (ea) $189.99

1303 Replacement Switch (ea) $69.99

4768 250V/3 Amp Fuse (pr) $3.99

Chasing Illumination Creates a Ring of Light that Runs in Circles Timed with your Engine Speed!

Fits: ’70-’99 Big Twin (except Twin Cam 88) & ’71-’03 XL Models

1300 Saturn Point Cover (ea) $39.99

Make that EVO shine with these chrome tappet block covers. Featuring show quality chrome & a simple bolt on design that is sure to get noticed.

Fits: ’84-’99 EVO Big Twins (requires minor modifications to stock airbox)

8123 Tappet Covers for Evo Big Twin (set)

$69.99

Note: FLT Models require the use of P/N 1600.

Works great with our Remote Control (P/N 4799 - pg 58)

These Tappet Block Covers are styled to complement the stock cam cover. The Blood Groove detail matches many other Küryakyn covers.

Fits: All ‘99-’10 Twin Cams

8230 Tappet Covers for Twin Cam (pr)

$69.99

Note: Not compatible with Küryakyn Tappet Block Accent (P/N 8389).Perk up your stock carburetor.

Fits: All ‘88-’06 CV Carburetors

9096 Smooth Chrome CV Carburetor Top (ea)

$15.99

Transform your stock cast aluminum or wrinkle black finish to glistening chrome.

Fits: ‘91-’03 XL Models

8124 Tappet Covers (pr) $49.99


CH

RO

ME

CH

RO

ME


A sight to see! Turn some heads with our matching Air Cleaner Cover. See Pg 223

P/N 8416

U.S. Patent 7,029,152

Let this cover take you to infinity & beyond with it’s 7-color L.E.D. spectacle of lights. This truly unique cover comes to life from its mirror-like chrome resting state to a virtual vortex of lights once ignited. Make all your friends envious of this one-of-a-kind cover!

Fits: All ‘84-’99 Evolution Big Twins & all ’99-’10 Twin Cam Engines

1301 Infinity Timing Cover (ea) $179.99

4715 Replacement Switch/Controller (ea) $31.99

4768 250V/3 Amp Fuse (pr) $3.99


Ride the lightning! Add visual excitement to your H-D’s thunder as you watch the illusion of energy exploding from the coil to the spark plug wires in time with engine speed. Select red, lime, ice blue, sky blue, dark blue, purple & green or have the colors continuously morph from one to the next. If desired, the L.E.D. display can also be lit constantly with the same color options.

Fits: All ’01-’10 Fuel Injected Softail Models (except Rocker/C)

1563 Chasing LED Coil Cover (ea)

$189.99

1303 Replacement Switch (ea)

$69.99

4768 250V/3 Amp Fuse (pr)

$3.99

3214

C H A S I N G L . E . D . ’ S S I M U L A T E S P A R K T R A V E L !7718


The stock cowbell horn cover is a great look for ol’ Bessie, but not on your bike! It lacks attitude. Here’s a better idea…the Skull Horn Cover. Stick this wicked ABS cover onto your stock cowbell & turn bovine to bad in an instant!


7718 Chrome Skull Horn Cover (ea) $49.99

7741 Painted Black Chrome Skull Horn Cover (ea)

$54.99

U.S. Patent 7,029,152 & Patent Pending

Gaze into the face of the Zombie. You’ll see a world beyond paint or simple chrome. The amazing infinity effect uses multi-color L.E.D.’s to give the chrome skull’s eyes & nose endless depth while illuminating steadily, flashing, or continuously fading through an array of colors at any frequency you desire. Use the included controller or connect to other Infinity or Lizard Light accessories.


7719 Zombie Infinity Horn Cover (ea) $189.99

A classy way to dress up your bike’s exposed rocker box bolts with this simple precision fitted push-on chrome cover.

Fits: All ‘99-‘10 Twin Cam Engines

8144 Stiletto Rocker Box Bolt Cover (set/4)

$39.99

Note: Cover extends 5/8” above top surface of the rocker box bolt. Be sure there is adequate clearance above the bolts you intend to cover.

83008106

8372


CH

RO

ME

8323

8128

8128

Bring the cutting edge look of our Stiletto line to your top end with our Stiletto Head Bolt Covers. Beautiful chrome & simple installation.

Fits: All ’87-’10 H-D Models

8107 Stiletto Head Bolt Covers (Set/4) $39.99

These high quality covers place a fine chrome finish on hardware that easily becomes rusty or corroded.

Fits: H-D Evolution Big Twins & ‘86-’03 XL (Does not fit Screamin’ Eagle Evolution heads)

8315 Scorpion Spark Plug- Head Bolt Covers (pr)

$39.99

The final touch that makes the difference. Chrome-plated billet aluminum construction with simple push-on installation.

Fits: All ’99-’10 Twin Cam Engines

8372 Peaked Rocker Box Bolt Covers (set/4)

$20.99

8693 Peaked Rocker Box Bolt Covers (set/6)

$31.99

Firedomes are a quick & easy way to dress up the dull hex of your spark plugs while Headbolt Covers hide the whole bolt head.

8300 Chrome Firedomes Fits: Evo Big Twin, Shovelhead, Iron XL (pr)

$20.99

8304 Chrome Firedomes Fits: Evo XL & Twin Cam (pr)

$25.99

8106 Headbolt Covers Fits: All ‘87-’10 H-D Models (Set of 4)

$20.99

8104 Firedome & Head Bolt Cover Set Fits:’99-’10 Twin Cams & ’87-’10 Sportsters (set)

$39.99

You can see if you have spark without pulling the plugs—you’ll see a flash of light every time your plugs fire. Install in minutes. They work with electronic or standard ignition, double-sealed & tested. Fits most vehicles with exposed wires. Not for use on fuel injected H-D Models.

2020 Red Lazer Nodes (pr) $25.99

2021 Amber Lazer Nodes (pr) $25.99

2022 Blue Lazer Nodes (pr) $25.99

Scorpion Spark Plug-Head Bolt Covers add a classy touch to the Twin Cam engine. These covers are held in position with set screws, ensuring rattle-free performance. With this design, the spark plugs can be removed without taking the covers off.

8323 Fits: All ‘99-’10 Twin Cam Engines(pr)

$49.99

8369 Fits: S&S Super Stock 96” Engine (pr)

$51.99

The V-Shield Horn Cover will fit all ’92-’10 H-D Big Twins (carbureted & injected), as long as the stock horn is located between the cylinders.

8128 V-Shield Horn Cover (ea)

$79.99

No custom Twin Cam will ever be complete without this beautiful cover. After this easy installation, the rough cast area around the transmission & oil lines disappear under a layer of luscious chrome.

8208 Fits: All ’99-’05 Dyna Models (ea) $49.99

8209 Fits: ’99-’01 Road Kings & ’00-’01 Electra Glides (Not shown – appearance similar to P/N 8208) (ea)

$69.99

8201 Fits: ’02-’06 Electra Glides, Road Glides, Street Glides & Road Kings (ea)

$93.99

B

A

C

B

C


A

8208

8201

This cover from Küryakyn elegantly conceals the area between the transmission top cover & the rear cylinder. Install by itself or as the perfect complement to our Oil Line Cover & Transmission Shroud (P/N 8201) & Oil Filler Spout Cover (P/N 8264).


8274 Rear Cylinder Base Cover (ea) $39.99

Note: Can be used with other H-D covers with minor modifications.

This really cleans up that dull, drab area around your oil filler neck. Chrome-plated die-cast construction with easy installation.

Fits: ’93-’06 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings (except Screamin’ Eagle Models with 103” engine)

8264 Oil Filler Spout Cover (ea) $59.99

Note: Compatible with H-D Engine-Transmission Interface covers (H-D P/N’s 66503-00, 66503-02, 66096-02).

Nestles right behind your rear cylinder. What a difference, & real easy to install.

8147 Rear Cylinder Base Cover Fits: All ’93-’95 FLT Models (ea)

$31.99

7877


CH

RO

ME

7876

8654

Transform the right side of your awesome Twin Cam engine with these easy to install, luxurious covers. Available for bikes equipped with stock headpipes or aftermarket True Dual pipes.


$169.99

8654 Fits: ’09 -‘10 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes (ea)

$119.99

Note: P/N 8654 will fit ’09 Touring Models with Küryakyn & V&H True Dual Head Pipes where the rear head pipe is routed in the same manner as the stock rear head pipe.


$169.99

Note: P/N 7877 will fit ’09-’10 Touring Models if equipped with aftermarket True Dual Head Pipes where the rear head pipe exits over the top of the transmission to the left side of the bike.

This inexpensive, chrome-plated cover can be added to our Transmission Shrouds (P/N’s 7876 or 7877) to clean up the black hole behind the rear cylinder on your Twin Cam engine.

Fits: ‘07-’08 Electra Glides, Road Glides, Street Glides & Road Kings with Küryakyn Transmission Shroud (P/N’s 7876 or 7877)

8394 Rear Cylinder Base Cover (ea)

$49.99

Note: Requires Küryakyn Transmission Shroud for installation. If a ‘09-’10 Touring model is equipped with after market exhaust that allows installation of P/N 7877, this cover may also be installed.

8295

If you’re using a 2-1 or staggered performance exhaust with our 8294 Inner Primary Cover, this extension covers the area where the crossover pipe had been.

8295 Inner Primary Cover Extension (For use with P/N 8294 Only) (ea) $49.99

Because of its die-cast construction, this cover provides a precise fit & a classy three-dimensional look. Nicely formed edges give this cover a creamy, flowing appearance that enhances the entire primary area. Four mounting points insure secure, quiet operation. (8299, 8292, & 8293 are not compatible with rear suspension lowering kits.)

8299 Fits: ’89-’99 Softail Models (except ‘97-’99 FLSTS) (ea) $103.99

8291 Fits: ’00-’06 Softail Models (works with lowered bikes) (ea) $114.99

8293 Fits: ’93-’02 FXDWG (ea) $99.99

8292 Fits: ’91-’05 Dyna Models with mid controls (ea) $99.99

Note: 8293 will fit ’93-’02 Dyna Models outfitted with H-D forward control (P/N 49080-93) or Küryakyn Forward Controls.

This handy little cover will put the finishing touches on your Dresser or Road King inner primary. It picks up right where our 8294 Inner Primary Cover left off to cover the shift pivot area & grease fitting. It only takes a moment to install.

Fits: ‘90-’06 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings

8370 Inner Primary Cover Front Extension (ea) $39.99

Our Cylinder Base Cover cleanly smooths the transition from the cylinders to the engine case. Installs in no time.

8140 Fits: ’84-’99 H-D Evo Big Twins with forward controls or floorboards (ea)

$39.99

8254 Fits: S&S Super Stock 88”, 96”, 98”, 103” Evolution Style Motor (ea)

$49.99


8294

8299

Now the awesome look of a chromed Inner Primary Housing is possible without the expense, hours of work, & down-time needed to chrome the OEM piece.

This quality die-cast cover goes over the existing inner primary, providing a smooth surface covering the visible rough cast areas of the stock chaincase.

Fits: ‘90-’06 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings

8294 Deluxe Cast Inner Primary Cover for Touring (ea)

$114.99


CH

RO

ME

8393


Transform your bike by adding these smooth lines to your inner primary. Fits perfectly with the existing stock engine case & primary housing. For an even more fabulous look, add Küryakyn Cylinder Base Covers for a look that’s beyond compare! (Sold separately)

8397 Fits: ’07-’08 Electra Glides, Road Glides, Street Glides & Road Kings (ea) Note: Will fit ‘09-’10 Touring Models, but One-Piece Cover (P/N 7780 pg 12) looks much better.

$139.99

8398 Fits: ’07-’10 Softails (except Rocker/C) (ea) Note: Rear section cannot be installed in FLSTSC.

$139.99

8399 Fits: ’06-’10 FXDWG, ’08-’10 FXDF with forward controls (ea) Note: Can also be used on any ’06-’10 Dyna converted to forward controls.

$139.99

8377 Fits: All ‘06-’10 Dyna with Mid Controls (ea)

$135.99

8392

8397

8398

These covers were born to be part of your Harley. They beautifully highlight the transition from cylinder to engine case. The perfect complement to Küryakyn Inner

Primary Covers. (Sold separately)

8392 Fits: ’07-’10 Electra Glides, Road Glides, Street Glides, Road Kings & ’06-’10 Dyna Models (ea)

$69.99

8393 Fits: All ‘07-’10 Softail Models (ea) $69.99

Smooths the transition between the cylinders & the engine cases. This form-fitting cover chromes the entire gap between the cylinder base & the inner primary. No more cast finish to discolor & get nasty looking. Clean-up on this area will be a snap compared to the stock roughcast aluminum, & you’ll add some major sparkle to the left side of your bike.

Fits: ’00-’06 Softails, ’99-’06 Electra Glides, Road Glides, Street Glides, Road Kings, ’99-’05 FXDWG & any ’99-’05 Dyna Models converted to forward controls

Important: Do not install this cover on modified engines with 4” or larger bores.

8143 Cylinder Base Cover for Twin Cam (ea) $62.99

This great looking, easy-to-install Cylinder Base Cover looks awesome on Sportster engines. The perfect accent to finish off your engine.

Fits: All ’91-’03 Sportster Models

8141 Cylinder Base Cover for Sportster (ea)

$39.99

This die-cast chrome cover hides the wrinkle black or plain cast surface between the cam cover & transmission. The stock chrome oil lines poke through the center of the cover for a high-tech appearance. We highly recommend our chrome Transmission Shroud with this cover for maximum flash.

Fits: All ‘00-’06 Softail Models

8204 Oil Line Nacelle for Twin Cam Softails (ea) $62.99

This part is awesome. We know you’ll probably tell your buds you pulled the tranny out last week & had her show chromed to impress em. We won’t tell anyone you just bought our cover & spent 5-10 minutes installing it.

8198 Fits: ’91-’99 Softail (ea) $49.99

8205 Fits: ’00-’06 Softail (Does not fit Models with hydraulic clutch) (ea)

$69.99

8205

This slip-on chrome accent is a great way to eliminate the unfinished transition between the clutch cable &

the transmission or primary cover.

Fits: Clutch Cables on ’87-’99 Big Twin & ’91-’06 Sportsters

2024 Clutch Cable Ferrule Accent (ea) $19.99

Note: Does not work with Küryakyn Transmission Shrouds (P/N 8198, 8208, 8209).


7837

7838

Create a shining example of just how good a Dyna engine & transmission can look! Install the Transmission Shroud & the rough, irregular cast surface will vanish leaving a sparkling, smooth new finish.

We’ve added a second version for motorcycles with aftermarket exhaust systems that do not retain the stock

rear exhaust support bracket. If you have replaced your stock exhaust & are not certain if the stock bracket was

reused, we suggest you purchase P/N 7838.


7837 Transmission Shroud for Dyna (ea) $89.99

7838 Transmission Shroud for Dyna with Aftermarket Exhaust (ea)

$89.99

A l w a y s u s e A n t i - S e i z e o n t h e t h r e a d s b e f o r e

a s s e m b l i n g c h r o m e , s t a i n l e s s s t e e l o r n y l o n i n s e r t e d n u t s o r b o l t s . O t h e r w i s e a c o l d w e l d c o n d i t i o n w i l l o c c u r .

Harley did a great job with the chrome & braided stainless exposed oil lines on the Twin Cam Softails, but they tried to sneak

by with a plain rubber line on the right side beneath the oil tank. They figured no one would

notice… we did! So we designed a slick, chrome two-piece cover to dress it up.

Fits: All ‘00-’10 Softail Models (except Rocker/C)

8223 Oil Line Cover (ea) $39.99

Note: Not compatible with Küryakyn Transmission Shroud (P/N 7878).

B

B

A

A

C

C


CH

RO

ME


Fill in the void behind the transmission & cover the rear part of the rough cast transmission case with this chrome cover. A great way to complement the existing chrome transmission end cover & oil tank.


7878 Transmission Shroud for Softail (ea)

$93.99

Our Oil Line Nacelle blankets the area between the cam cover & transmission. It surrounds the oil lines & covers the exposed clutch cable where it enters the transmission end cover. Installs easily & is the perfect complement to our Transmission Shroud & Tappet Block Accent.


8395 Deluxe Oil Line Nacelle (ea)

$72.99

When it comes to chroming the engine area of your bike, there’s one simple rule: More is better! This easily installed three-piece kit adds a silky smooth layer of shimmering chrome to the area between the transmission top cover & rear cylinder, & even the seat post. A natural complement to the Deluxe Oil Line Nacelle (P/N 8395), this large chromed area will come alive in sunlight & showcase any custom accent lighting such as our incredible Super Lizard Lights.

Fits: All ’07-’10 Softail Models (except Rocker/C or FLSTSC with stock head pipes)

8656 Rear Cylinder Base Cover for Softail (set) $89.99

2034 Fits: ’96-’98 Dyna (ea) $51.99

2033 Fits: ’91-’95 Dyna (ea) $51.99

This rubber-lined, easily installed die-cast cover is a must.

Fits: All ’84-’99 Evo Big Twins except Models equipped with large 2-terminal sending units

8136 Oil Sender Switch Cover Set $29.99

A sleek, smooth & beautifully chromed add-on.

Fits: ’87-’98 FLTC & FLHTC Models with large 2-terminal sending units

1600 Oil Pressure Sender Cover (ea)

$29.99

Embellish your oil filler cap with our easy peel-&-stick chrome accents! The perfect complement to our Oil Filler Spout Cover (P/N 8264). Measuring 1-7/16” in diameter, they can be used universally to accent many other locations (fork tube caps, etc).

Fits: ’93-’06 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings & ’99-’05 Dynas

8263 Peaked Oil Filler Cap Accent (ea) $17.99

8259 Flag Oil Filler Cap Accent (ea) $16.99

W h e n i n s t a l l i n g t h e Z o m b i e F i l l e r C a p , t w i s t t h e c a p a f e w t u r n s w i t h d o w n w a r d

p r e s s u r e t o e n s u r e t h e f l a n g e o f t h e s t o c k d i p s t i c k p l u g i s f u l l y s e a t e d i n t h e g r o o v e i n

t h e c a p . I n s t a l l d i p s t i c k & v e r i f y c a p i s s e c u r e b e f o r e

r i d i n g b i k e .



Whether you’re into Zombies or not - your bike cries out for this part to perk up that dull oil filler cap. This chrome-plated, die-cast cap is easy to install & makes

checking your oil a breeze!

Fits: ’93-’06 Electra Glides, Road Glides, Street Glides, Tour Glides, Road Kings & ’99-’05 Dynas

1052 Zombie Oil Filler Cap (ea) $49.99

Don’t have or can’t find a big ol’ allen wrench to check your oil? Not a problem! Just twist the handy thumb screw on our “instant” check dipsticks anytime you feel the urge.

1013 ’87-’06 5-Speed Big Twin, Chrome (ea) $29.99

1012 ’80-’86 5-Speed Big Twin, Chrome (ea) $20.99

1010 ’80-’86 5-Speed Big Twin, Red (ea) $18.99

1014 ’80-’86 5-Speed Big Twin, Blue (ea) $18.99

1016 ’80-’86 5-Speed Big Twin, Black (ea) $18.99

Conceal both the switch body & the stock rubber insulators! Installation is a breeze.

Fits: ’98-’05 Dyna, ‘98-’10 Electra Glides, Road Glides, Street Glides, Road Kings, & Trikes

2025 Frog Mouth Neutral Switch Cover (ea) $19.99

Keep your stock dome- shaped starter motor cover & add this trick little Solenoid Cover.

Fits: ’90-’06 Big Twin Starters, ’91-’10 XL1200, & ’95-’10 XL883 (not for use with full coverage starter end covers)

9050 Chrome Solenoid Cover (ea) $19.99

The white plastic electrical connector on top of the starter just looks out of place. Here’s a quick & easy cure.

Fits: ‘96-’06 Evo Big Twin & Twin Cam Starters

1315 Starter Connector Plug Cover (ea) $25.99

Note: Intended for Touring & Dyna Models. This connector is covered by oil tank on Softail Models.

We’ve added more Starter Cover offerings so you can now dress up the starter & surrounding wires on H-D’s CVO Models. These beautifully chromed cover sets cover the solenoid, the end of the starter motor & associated wiring.

8638 Fits: ‘07-’10 FLHTCUSE, ’07-’08 FLHRSE, ’09 FLTRSE, ‘10 FLHXSE (ea) Patent Pending

$89.99

8639 Fits: ’03 FLHRSE, ’04-’05 FLHTCSE, ’06 FLHTCUSE (ea) U.S. Patent D595,191

$89.99

2025

9050

9050

1315

2025


CH

RO

ME

8638

8639

Here’s one of the nicest details for Touring Models we’ve developed yet. This one simple cover turns the hodge-podge of the starter solenoid & all of its related wiring into one sculpted, glistening unit. It’s designed to work with the stock starter end cover & complement our Transmission Shroud & Cylinder Base Cover. Now this once dull, unattractive part of your bike will sparkle in sunlight or accent lighting, & be easier to keep clean too!

7847 Fits: ’07-’10 Electra Glides (except ’07-’10 FLHTCUSE), ’07-’10 Road Glides (except ’09 FLTRSE), ’07-’10 Street Glides,(except ‘10 FLHXSE & ’07-’10 Road Kings (except ’07-’08 FLHRSE) & Trikes (ea) U.S. Patent D596,537

$69.99

7846 Fits: ’99-’06 Electra Glides (except ’04-’05 FLHTCSE & ’06 FLHTCUSE), ’99-’06 Road Glides, ’06 Street Glides, & ’99-’06 Road Kings (except ’03 FLHRSE) (ea) U.S. Patent D595,191

$69.99

8239

7857


8239

8609

This large show chromed cover fills that nasty black hole behind your rear cylinder & starter while perfectly hiding the gap between the y-frame member. No drilling or modifications necessary for Cruise Control Equipped Models. If you have L.E.D.’s lighting your engine, this helps reflect light & makes that area sparkle!


7857 Behind the Engine Frame Cover (ea) $103.99

12-1/4”

10-5

/8”

Create a smoother, creamier look by concealing unsightly frame welds with this luscious, chrome-plated steel cover. Installs easily in just a matter of minutes.

8239 Fits: ’97-’07 Electra Glides, Road Glides, Street Glides & Road Kings (pr) U.S. Patent D518,760

$103.99

7842 Fits: ’08 Electra Glides, Road Glides, Street Glides & Road Kings (pr)

$ 103.99

8609 Fits: ’09 -‘10 Electra Glides, Road Glides, Street Glides & Road Kings (set) Patent Pending

$119.99

Here’s a quick & easy way to conceal the frame’s top tubes on ‘00-’07 Softails. Our creamy smooth chrome covers tuck in behind the fender struts & slip up under the fuel tank.

8240 Mid-Frame Cover (set) Fits: All ’00-’07 Softail Models (except ‘00-’07 Deuce, ‘06-07 FXST, FXSTB, FXSTC, FXSTS & ‘07 FLSTF) equipped with a seat that fastens to the rear fender ONLY

$69.99

8251 Mid-Frame Cover (set) Fits: ’00-’07 Deuce with stock or aftermarket seat, all ’00-’07 Softail Models (except ‘06-07 FXST, FXSTB, FXSTC, FXSTS & ‘07 FLSTF) equipped with an aftermarket seat that fastens to the sides of the frame

$69.99

Note: As a general rule, FXST Models come from the factory with seats that fasten to the rear fender only. Custom seats may not fasten the same way as the O.E.M. seat. To ensure you select the correct frame covers, take a moment to confirm how the seat is mounted before ordering. The Deuce, because of its unique fender struts, will always use P/N 8251.

WIDOW® PASSENGERBOARD COVER PG 156

WIDOW® SPEAKER GRILLS PG 118

WIDOW® TAILLIGHT COVER PG 164

WIDOW® FOOTPEGS PG 84

TRANSFORMERTM GRIPS WITH WIDOW EMBLEMS PG 61

ALSO AVAILABLE:GRIPS PG 62SHIFT PEG PG 84STIRRUPS PG 84WINDSHIELD PG 188 BRAKE PEDAL PADS PG 84SHIFT LINKAGE PG 109DRIVER FLOORBOARD COVERS PG 94PASSENGER FLOORBOARD INSERTS PG 94


D

D


AC

B

LUGGAGE RACK

AERIONTM LIGHTBARS

RUN-TURN-BRAKE SPOILER

U L T R A C L A S S I C — R E A R E N D

® Patent Pending

When perfection hinges on detail, these little cover-ups really shine! Our beautifully chromed aluminum hinge covers install quickly & securely over the tired looking OEM stainless pieces. You’ll be amazed at the life these give to any paint job.

Fits: ’89-’10 Electra Glides, Tour Glides, Tri Glides, or any Touring Model equipped with a King, Ultra, or Chopped Tour-Pak

8648 Hinge Covers (set) $39.99

® Patent Pending

Break free from the ordinary! We’ve combined a graceful 3-D shape & new lens technology to breathe life into the Tour-Pak. These chrome accents install right over the stock red lenses or chrome accents providing sleek styling & additional back lighting. Rear facing lenses are lit with red L.E.D.’s, which may be wired for auxiliary run/ brake, or run/ turn function. Lenses on the sides feature a new finish which appears as chrome, but will allow the red lights in an Ultra Tour-Pak to shine through.

Fits: ’94-’10 Electra Glides, Tour Glides, & any other Touring Models that have been equipped with King or Ultra Tour-Pak

8650 Lower Lighted Trim for Tour-Pak (pr)

$189.99


CH

RO

ME

A

C

B

D

8646

8647

®

Patent Pending

If your bike wasn’t noticed before, it sure will be now! This engaging chrome trim is applied right over the stock Tour-Pak light bar, adding an element of surprise to the back of your ride. Besides the striking chrome finish that looks incredible with any paint scheme, the smoked lenses appear to be chrome, but illuminate red when the lights are activated. Choose to install the included center panel with a menacing eagle on one side or black on the other, or leave uninstalled which allows the stock Harley-Davidson script to be proudly framed.

Fits: ’93-’10 FLHTCU, ‘10 FLHTK, ‘08-’09 FLHTCUSE, & ‘93-’96 FLTCU

8666 Colossus Rear Trim for Ultra Tour-Pak Light Bar (ea) $189.99

®

Patent Pending

These chrome accents really highlight the tasteful look of the H-D King, Chopped or Ultra Tour-Pak & saddlebag lids. Choose to use just one set, or combine two sets for a truly pulled together look that screams streamlined! Besides the visual appeal, they also provide protection to the lids’ top edges that are very susceptible to nicks & other damage. Hi-strength peel-&-stick adhesive assures they’ll stay securely in place.

Fits: Tour-Pak Lids on ’80-’10 Touring Models equipped with King or Chopped Tour-Paks & Saddlebag Lids on ’93-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, or Road Kings with hard saddlebags

8647 Tour-Pak Lid Accents (pr) $49.99


By adding this classy stamped Lower Frame Cover, you’ll create a pleasing transition out of what was visual chaos. This beautifully chromed embossed cover creates a perfect bridge between the stock painted side cover & the passenger floorboard area, eliminating exposed frame tubes & the rear rubber isolation mount. A great addition to Mid Frame Covers!


7829 Right Rear Lower Frame Cover (ea) $69.99

It’ll be hard to beat these cutting edge Passenger Board Covers. Not only do they add an unmistakable look to the passenger boards, but their front edge incorporates a soft bumper to protect your legs when backing out of parking spaces or other tight spots. The Flamed version includes interchangeable Zombie & Maltese Cross Emblems. The Widow Board Covers satisfy the arachnid lover in all of us.

Fits: ’86-’10 Electra Glides, Road Glides, Tour Glides, Road Kings, Trikes & ’86-’10 Softails with traditional passenger boards

4563 Flamed Passenger Board Covers (pr) $99.99

4564 Widow Passenger Board Covers (pr) $99.99

4564

4563


U.S. Patent 7,029,152

The illusion of infinite depth & an array of solid, pulsing, or continuously changing colors that fade into oblivion; you’re going to have to see this to believe it. Multi-function L.E.D.’s emit red, lime, ice blue, sky blue, dark blue, purple & green. The complete kit includes everything you need; latch bodies, wiring, & the controller. Stock lock assemblies are retained. Alone or combined with other Infinity & Super Lizard lighting kits, the impact is indescribable.

Fits: ’93-’10 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings with hard saddlebags

1568 Infinity Saddlebag Latches (pr) $249.99


4768 250V/3 Amp Fuse (pr) $3.99

Saddlebag latches are conspicuous on touring rigs & are a great place for a distinctive touch of style. The subtle grooved design adds an uncomplicated detail or add to your custom theme with the classic flamed version supplied with Maltese Cross, Zombie, & Widow emblems. Stock lock mechanisms are re-used so you won’t end up with another set of keys!


1595 Flamed Saddlebag Latch Accents (pr) $129.99

1599 Grooved Saddlebag Latch Accents (pr) $89.99

Patent Pending

It’s all about lines; if you’ve got ‘em, flaunt ’em! This chrome highlight brings out the sweeping style of your FLH saddlebags. Besides their great looks, you’ll also be protected from minor nicks & scratches to these areas. Made of flawlessly chromed ABS, just peel the backing off the high-strength adhesive & press the trim onto the clean saddlebag.


8646 Saddlebag Lid Accents (pr) $59.99

Much like the work of an expert pin striper, these streamlined chrome accents work with the contours of the hard saddlebags & side covers to create a flowing, swept body line. Intended for use without saddlebag rails, they’ll add a classic, personal touch to your H-D Touring bike. Simple peel-&-stick installation requires only a few minutes & a real eye for style!


8645 Side Cover & Saddlebag Accents (6 pieces) $124.99

8646

1599


CH

RO

ME

8646

1595

8645


1190

1192

1564

8644

This subtle lighted chrome Fender Skirt is just enough to catch your eye without dominating the scene. Accented with a sliver of red L.E.D. light, it also serves as an auxiliary running & stop light. Installation is a breeze.

Fits: ’98-’08 Road Glides, ’04-’07 Road King Customs, ’02-’03 FLHRSE, ’04-’05 FLHTCSE, ’06-’08 FLHTCUSE

8644 Lighted Fender Skirt (ea)

$119.99

If you want to get someone’s attention, whisper. The subtle, directional shape suggests forward motion while providing a fine chrome accent line that clings to the bottom edge of the saddlebag. The small rear-facing red lights operate as auxiliary run & brake lights & punctuate the trailing edge of this classy accent. Wired easily via plug connections on ‘97-’10 Models.

Fits: ’93-’10 Electra Glides, ’98-’09 Road Glides, ’06-’09 Street Glides, ’93-’96 Tour Glides, & ’94-’10 Road Kings with hard saddlebags

1564 Lighted Lower Saddlebag Accents (pr) $199.99 Note: ’93-’96 Models require lights be hard-wired to motorcycle.

8644

Fill the void between your fender & saddlebags with these classy ABS filler panels. The lower attach to the fender with pressure sensitive adhesive while the upper covers are secured by a

simple mounting bracket. Choose chrome-plated or raw versions & have them custom painted to match your bike.

Fits: ’95-’08 Dressers, Road Kings, Road Glides with or without H-D Detachable Docking Hardware Kits (53803-06 & 53804-06) –Not compatible with saddlebag rails

1192 Chrome Saddlebag Filler Panels (pr) $103.99

1195 Raw Saddlebag Filler Panels (pr) $83.99

Fits: ‘95-‘08 Electra Glides, Road Kings & Road Glides with Hard Bags—Not compatible with saddlebag rails or H-D Detachable Accessories

1191 Chrome Saddlebag Filler Panels (set/4) $129.99

1194 Raw Saddlebag Filler Panels (set/4) $89.99

Fits: ’95-’08 Road King Classics & Road King Customs with leather covered bags–Not compatible with saddlebag rails or H-D Detachable Accessories

1190 Chrome Saddlebag Filler Panels (set/4) $129.99

1193 Raw Saddlebag Filler Panels (set/4) $135.99

The clean, unadorned fenders on the Road Glide, Road King Custom, Street Glide & many CVO Screamin’ Eagle Touring Models look sharp, but could use a little flash. Our classy fender tips are the perfect chrome complement to these clean fenders. Complete the look with the matching Rear Saddlebag Accents.

8640 Rear Fender Accent Fits: ’98-’08 Road Glides, ’04-’07 Road King Customs, ’02-’03 FLHRSE, ’04-’05 FLHTCSE, ’06-’08 FLHTCUSE (ea)

$29.99

8641 Rear Saddlebag Accents Fits: ’93-’10 Electra Glides, Road Glides, Street Glides, Tour Glides & Road Kings with hard saddlebags (pr)

$39.99

Want to make sure you’re heard? Then these 115- decibel horns will turn some heads! These trumpet horns won’t clutter up the side of that awesome V-Twin motor. The unique mounting position behind the saddlebag creates an enhanced blast when you sound the horn & removes the problem of bugs, water, & debris that plague other horns. This chrome-plated set includes a plug-&-play wiring harness that allows you to keep your stock horn if desired.


7740 Hidden Horns for Touring Models (set) $176.99

8640

8641

Fits Bikes with & without Detachables


CH

RO

ME

M a k e i t a S e t . . .

You got the back-end covered; Now take care of the front!

See Pg 127

P/N 8642 & 8643

7607

7609

Bolt them on & dress it up! Our bracket accents are a super easy way to cover up that lower saddlebag support where it meets the lower fender bracket. Three cool styles to choose from.

Fits: ‘96-’08 Electra Glides, Road Glides, Tour Glides, & Road Kings

1596 Zombie Saddlebag Mount Accents (pr) $49.99

1597 Maltese Cross Saddlebag Mount Accents (pr) $49.99

1598 Grooved Saddlebag Mount Accents (pr) $49.99

Note: Not compatible with H-D’s Nostalgic Saddlebag Guard Rails.

The style of your exhaust system plays a major role in the overall attitude your bike displays. These clamp-on exhaust tips transform rather ho-hum stock mufflers into nostalgic Fishtails, or a more modern Six Gun style in just a few minutes, & for a whole lot less cash than replacement mufflers. While sound levels & performance are unaffected, visual appeal is through the roof!

Fits: ‘95-’10 Electra Glides, Tour Glides, & Road Kings, ‘98-’09 Road Glides, & ‘06-’09 Street Glides

7607 Six Gun Exhaust Tips (pr) $149.99

7609 Fishtail Exhaust Tips (pr) $149.99

1596


B

C

B

A

A

D

7858

Affordable, easy, & wow what a difference! This creamy chrome-plated stamped steel insert covers up your plain black plastic inner fender/splash guard. Just stick it on with double-sided tape & go!

7858 Fits: All ‘00-’06 Softail Models (except ‘04 FXSTDSE or ‘06 FXST, FXSTB, FXSTS, FLSTFSE) (pr)

$103.99

7848 Fits: ‘07 Deuce, Deluxe, Heritage & Springer Classic (ea) Note: This is one-piece for the right side of the bike.

$59.99

7867 Fits: All ‘08-’10 Softail Models (except ‘08-’10 Rocker/C) (pr) $119.99

7867

Next to brass knuckles, nothing says street tough like a sawed off shotgun. Jailbreak Larry dreamed up these hardcore belt guards & we’re bringing them to the street. Chrome-plated aluminum extrusions & castings with beechwood grips make these belt guards look like the real thing. Sturdy, welded brackets fasten to existing tabs on the swingarm. Go ahead, make my day!

1542 Side-by-Side Shotgun Belt Guard (ea) Fits: ’00-’10 FLSTC, ’06 FLST, ’00-’06 FLSTF, ’05-’10 FLSTN, ’00-’03 FLSTS, ’05-’07 FLSTSC, ’00-’05 FXST/B/S

$199.99

1543 Over-Under Shotgun Belt Guard (ea) Fits: ’00-’07 FXSTD, ’06-’08 FXST, ’06-’09 FXSTB, ’07-’10 FXSTC, ’06 FXSTS, ’07-’10 FLSTF, ’10 FLSTFB, ’08-’10 FLSTSB

$197.99

1542

K Ü R Y A K Y N I Z E D — S O F T A I L R E A R E N D

From the factory, pieces like the lower belt guard are made of textured black plastic so they fade into the background. But when you’re trying to stand out & show off your beautiful machine, this stamped steel accent presents a great opportunity to add another gleaming chrome accent without the hassle of removing the stock guard. Combined with Küryakyn Swingarm Cover Sets & Fender Accents, you’ll end up with a fully chromed drive line that’s sure to make an impression!

Fits: All ’00-’10 Softail Models (except Rocker/C)

8677 Lower Belt Guard Accent (ea) $79.99

Not interested in chroming your entire swingarm, but want to hide the ugly axle & axle adjuster at the end of the swingarm? Then these are for you.

The lighted version features a band of rear facing, super bright red L.E.D.’s. in each cover. The L.E.D.’s are single function & can be wired as auxiliary running lights, turn signals, or brake

lights. (For increased rear visibility, add our Rear Run-Turn-Brake Controller [P/N 4859] to make your taillight, existing turn signals, & the Lighted Phantom Covers multi-functional). Phantom covers are easy to install with a clean, streamlined design.

Fits: All ’08-’10 Softails (except FLSTF, FLSTFB, FLSTN, FLSTSB, FXCW/C)

7816 Lighted Phantom Covers (pr) $103.99

7817 Unlighted Phantom Covers (pr) $79.99

Note: Will fit Fat Boys, Deluxe, & Cross Bones if stock exhaust has been removed & replaced with a staggered dual or 2-1 system.

7817

7818


CH

RO

ME

C

D

7816

7815H-D threw us for a loop by redesigning the swingarm on the ’08-later Softails. We picked ourselves up, dusted ourselves off, & came up with this killer swingarm cover design. Undeniably, these kits are a great looking & affordable alternative to the downtime & expense of outfitting a Softail with a chrome plated swingarm!

Our swingarm cover sets are offered in three packages:

Super clean set covers the axle, upper & lower tubing, & the upper sections of the swingarm

7815 Fits: All ‘08-’10 Softails (except FLSTF, FLSTFB, FLSTN, FLSTSB, FXCW/C) (set)

$159.99


Just like the Unlighted sets, but the Phantom Covers feature a band of rear facing, super bright red L.E.D.’s. The L.E.D.’s are single function & can be wired as auxiliary running lights, turn signals, or brake lights. (For increased rear visibility, add our Rear Run-Turn-Brake Controller [P/N 4859] to make your taillight, existing turn signals, & the Lighted Phantom Covers multi-functional).

7814 Fits: All ‘08-’10 Softails (except FLSTF, FLSTFB, FLSTN, FLSTSB, FXCW/C) (set)

$199.99


Intended for riders that already have Küryakyn Phantom Covers or similar style axle covers

Covers upper & lower tubing & the upper sections of the swingarm

In some instances, depending on the coverage provided by the axle covers, there will be a small gap between the tubular swingarm covers & the axle covers. If the existing axle covers do not cover the weld between the axle plate & the tubing, there will be a gap. If the potential of this gap causes concern, we suggest purchasing one of our complete Swingarm Covers Sets.

7818 Fits: All ‘08-’10 Softails (except FXCW/C) (set) $129.99

A great looking way to hide the unsightly axle & axle adjuster section of the Softail swingarm. Two versions offered. Lighted version contains super-bright red L.E.D.’s housed in a smoke lens capsule that fit into a recessed pocket on the trailing edge of the cover. These single circuit L.E.D.’s can be wired as auxiliary running lights or turn signals, or brake lights.

Fits: All ‘86-’07 Softails Models (except ’00-’07 FLSTF, FXSTD, ‘05-‘07 FLSTN, ‘06-’07 FXST, FXSTB, FXSTC, FXSTS)

8200 Phantom Covers, Chrome (pr) $79.99

8202 Phantom Covers, Gloss Black (pr) $79.99

8220 Lighted Phantom Covers (pr) $93.99

Note: Lighted Phantom Covers are not D.O.T. approved nor are they intended to replace stock turn signals or taillights.

Note: Will fit ‘00-’06 FLSTF, ‘00-’07 FXSTD, or ‘05-’07 FLSTN if stock exhaust has been removed & replaced by a staggered dual or 2-1 system.

This slick little pivot cover gives you a nice, clean finish on it in a matter of minutes. No tools needed for installation.

Fits: ‘91-’03 Sportster Models

8101 Swing Arm Bolt Cover (ea) $10.99


8256

8102

8108

8200

8220

Küryakyn Swingarm Cover Sets are offered in three packages:

Super clean set covers the axle, upper & lower tubing, & the upper sections of the swingarm.

8256 Fits: ’00-’07 Softails* (except ’00-’07 Deuce, ‘07 FLSTF, ‘06-’07 FXST, FXSTB, FXSTC, FXSTS) (set)

$169.99

8284 Fits: ’00-’07 Deuce* (set) $169.99

8288 Fits: ’86-’99 Softail Models (set) $169.99

*P/N 8256 will fit ‘00-’06 FLSTF or ‘05-’07 Deluxe & P/N 8284 will fit ‘00-’07 Deuce ONLY if stock exhaust has been replaced with a staggered dual or 2-1 system.

Just like the Unlighted sets, but the Phantom Covers feature a band of rear facing, super bright red L.E.D.’s. The L.E.D.’s are single function & can be wired as auxiliary running lights, turn signals, or

brake lights. (For increased rear visibility, add our Rear Run-Turn-Brake Controller [P/N 4859] to make your taillight, existing turn signals, & the Lighted Phantom Covers multi-functional).

8102 Fits: ’00-’07 Softails* (except ’00-’07 Deuce, ‘07 FLSTF, ‘06-’07 FXST, FXSTB, FXSTC, FXSTS) (set)

$199.99

8698 Fits: ’06-’07 FXST, FXSTB, FXSTC, FXSTS, ‘07 FLSTF (set) $199.99

8221 Fits: ’00-’07 Deuce* (set) $199.99

8222 Fits: ’86-’99 Softail Models (set) $199.99

*P/N 8102 will fit ‘00-’06 FLSTF or ‘05-’07 Deluxe, P/N 8221 will fit ‘00-’07 Deuce & P/N 8698 will fit ‘07 FLSTF ONLY if stock exhaust has been replaced with a staggered dual or 2-1 system.

Intended for riders that already have Küryakyn Phantom Covers or similar style axle covers. Covers upper & lower tubing & the upper sections of the swingarm. In some instances, depending on the coverage provided by the axle covers, there will be a small

gap between the tubular swingarm covers & the axle covers. If the existing axle covers do not cover the weld between the axle plate & the tubing, there will be a gap. If the potential of this gap

causes concern, we suggest purchasing one of our complete Swingarm Cover Sets.

8108 Fits: ’00-’07 Softails (except ’00-’07 Deuce) (set) $135.99

8228 Fits: ‘86-’99 Softails (set) $129.99

Quickly & easily cover the ends of the swingarm pivot shaft on your Twin Cam Softail with these chrome-plated covers.

Fits: All ’00-’07 Softail Models (except ‘05-’07 FLSTN, ‘07 FLSTF, & ‘07 FXSTD)

7849 Swingarm Pivot Covers (pr)

$20.99


CH

RO

ME

8253

See pg 160 for items not found on these pages.

8256

1542

7858

7851

This is one of our most popular Softail accessories. This high quality die-cast cover features a ball-milled detail & a lush chrome finish.

It is important to remember that the reason we offer so many versions of Boomerangs is not due to differences in the frame itself, but due to components bolted to the frame that affect installation of our covers. Exhaust support brackets will directly affect which covers to order. Please read the applications & notes carefully before ordering. Boomerang frame covers are not compatible with H-D passenger footboards.

7851 Fits: All ‘00-’07 FXST (except Deuce) & all ‘00-’07 FLST (except Fat Boy & Deluxe) (pr) $103.99

8233 Fits: ‘00-’06 Fat Boy with Shotgun Exhaust using O.E. rear support bracket (pr) $89.99

8235 Fits: ‘00-’07 Deuce with exhaust system not using O.E. rear support bracket (pr) $103.99

Note: If you have a ‘00-’07 Fat Boy or ‘05-’07 Deluxe & have removed the O.E. rear exhaust support bracket, you should use P/N 7851.

8188 Fits: All FXST Models & all FLST Models without Shotgun Exhaust (pr) $103.99

Easy & neat, this cover installs right below our Boomerang Frame Cover on the left side of your bike.

Fits: ’97-’07 Softail Models without cross-over exhaust

8253 Lower Frame Cover for Softail (ea)

$39.99

Take a few minutes & apply this cool Swingarm Cover for Dyna Glides. It’s two-piece design permits simple, quick installation & it covers all visible parts of the swingarm – even the axles! You won’t miss any riding time & you can do it for a fraction of the cost of plating the stock swingarm!

Fits: All ‘06-’09 Dyna Models

7819 Swingarm Covers for Dyna (pr) $129.99

9009


8130

9008

Thick & creamy. Our die-cast aluminum cover follows the bobbed fender line perfectly & installs in about two minutes.

Fits: All ’73-’10 Big Twins with bobbed rear fender

8131 Taillight Cover for Bobbed Rear Fenders (ea)

$19.99

Sturdy & attractive. These superbly stylized covers do wonders for your dull taillight. 3-year limited warranty included, as these will never rust.

Fits:’73-’10 H-D Models without bobbed rear fenders (except ’97-’03 FLSTS, ’05-’07 FLSTSC, ’05-’10 FLSTN, ’00-’07 FXSTD, ’02-’10 V-Rod, ‘07-’10 XL1200N, ‘09-’10 XL88N, ’08-’10 Rocker, ’09 -’10 FXDB, ‘10 FXDWG, ’10 FLHX, ’10 FLTRX

8130 Taillight Cover (ea) $29.99

9008 Taillight Visor without Slots (ea) $28.99

Note: P/N 9008 is intended for motorcycles with the license plate below the taillight to cover the clear window on top of the lens.

Patent Pending

As your taillight fades into the darkness, the sinister impression of the Zombie is all that will

remain. A new addition to our popular collection, this taillight cover reinforces the image of your evil ride.

All hardware is included for easy installation.

Fits: ’73-’10 H-D Models without bobbed rear fenders (except ’97-’03 FLSTS, ’05-’07 FLSTSC, ’05-’10 FLSTN, ’00-’07 FXSTD, ’02-’10 V-Rod, ‘07-’10 XL1200N, ‘09-’10 XL88N, ’08-’10 Rocker, ’09 -’10 FXDB, ‘10 FXDWG, ’10 FLHX, ’10 FLTRX)

9009 Zombie Taillight Cover (ea) $29.99

® Patent Pending

More evil per mile! The Widow Taillight Cover features a chrome 3-D Widow figure creeping across the taillight lens. In daylight it sparkles in the sun, in darkness an ominous silhouette is cast. Get caught up in the Widow’s web & add this venomous taillight cover to your collection of Widow themed accessories!

Fits: ’73-’10 H-D Models without bobbed rear fenders (except ’97-’03 FLSTS, ’05-’07 FLSTSC, ’05-’10 FLSTN, ’00-’07 FXSTD, ’02-’10 V-Rod, ‘07-’10 XL1200N, ‘09-’10 XL88N, ’08-’10 Rocker, ’09 -’10 FXDB, ‘10 FXDWG, ’10 FLHX, ’10 FLTRX)

9020 Widow Taillight Cover (ea) $39.99

The Street Glide is way cool, but this bolt on, gracefully curved license plate frame makes a big difference. Rid

yourself of the stock black bracket & the flat look. No drilling – no need for a new license plate light. Just

bolt it on & go!

3163 Fits: ‘06-’09 Street Glides, ‘09 Road Glides, ‘09 Electra Glide Standards, ‘09-’10 Road Kings, ‘07-’08 FLHRSE, & ‘05 FLHTCSE (ea)

$72.99

3157 Fits: ‘10 Street Glides & Road Glide Customs (ea) Patent Pending

$72.99

Küryakyn makes it easy to give the rear fender on Road Kings, Road Glides, & FLHT Standards a clean, uncluttered look like the FLHX without breaking the bank. The kit includes our Bullet Light Rear Turn Signal Bar (P/N 2098), Curved License Plate Frame (P/N 3162), & Rear Bar Accent (P/N 1320) to cover the mounting holes left uncovered by removal of the stock license plate. Buy this kit & save! No need to buy these parts separately!

Fits: ’97-’08 Road King Models (except ‘07-’08 FLHRSE), ’98-’08 Road Glides, ’97-’08 FLHT Standard

3000 Deluxe Bullet Light Rear Turn Signal Bar Kit (kit)

$239.99


CH

RO

ME

Here’s an easy way to give your Road King or Road Glide a sleeker look. This license plate bracket lays down to complement the lines of the fender rather than standing up like a billboard. Mounts in the same location as the stock piece. Easy to install.

Fits: ‘97-’08 Road Kings (except ‘07-‘08 FLHRSE), ‘98-’08 Road Glides & ‘97-’08 FLHT Standard

113 Lay Down License Plate Holder (ea)

$41.99

You asked for it – we designed it! This very classy curved license plate mount hugs the contour of the fender & replaces the existing fender tip. Incorporates a stylized tip, red L.E.D. lights & a

light to illuminate the plate itself while cleaning up the clutter on the rear fender.

A simplified wiring solution readily plugs in on ’96-’08 Touring Models & ‘96-’10 Softails. Hardwiring is required on earlier Models.

Fits: Replaces Stock Fender Tip Light on ’80-’08 Electra Glides, Tour Glides & Road Kings, & ’86-’10 FLST Models

3164 Curved Fender Tip License Plate Mount (ea)

$179.99

W h e n r o u t i n g w i r e s f o r l i g h t e d l i c e n s e p l a t e s , m a k e s u r e t h e y a r e n o t i n a

l o c a t i o n w h e r e t h e y c a n g e t p i n c h e d ,

f r a y e d o r c u t .


As long as you have to display a license plate on your bike, why not make it look like it belongs there? Curved to your fender’s contour & laid down for a sleek low profile, this chromed, ball milled mount will blend in, not stick out. Designed to fit 4”x7” plates.

Fits: ’97-’08 Road Kings (except ’07-’08 FLHRSE), ’98-’08 Road Glides & ’97-’08 FLHT Standard

3165 Curved Laydown License Plate Mount (ea) $72.99

The one thing most custom license plate frames have in common is they’re too small to fit about half of the state’s license plates! This frame is offered in two sizes to fit 4-3/8” x 8” & 4” x 7” plates. Depending on which plate you’re working with, some minor modifications may still be necessary, but this will make many installations much easier.

This great looking frame is finished in glistening chrome, & has ball-milled accents.

9164 Large License Plate Frame (ea) $29.99

9163 Small License Plate Frame (ea) $29.99

This chrome die-cast license plate frame incorporates two high intensity light bulbs that are wired separately. Wire one each to your brake & tail lamp circuits or together for an extra bright stop or running light.

Fits: 4” x 7” Plates

9167 Lighted License Plate Frame (ea)

$45.99

Note: Not intended to replace O.E. brake or taillight.

This super cool, curved laydown license plate bracket is a major improvement over the stock billboard plate mount on many H-D’s. The curved frame meets the backing plate cleanly for a finished & completely custom look. Accents 4”x 7” plates.

Fits: Any H-D Model with the standard 3-bolt mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)

9171 Curved Laydown License Plate Mount with Frame (ea)

$69.99

Designed to replace Harley’s standard 3-bolt license plate bracket, this baby streamlines your fender by tilting the plate back. Kit includes rubber wedge so you have an option as to how far the plate lays down.

Fits: Any H-D Model with the standard 3-bolt mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)

9165 Laydown License Plate Holder (ea)

$39.99

Our chrome frame & back plate will dress up your license plate when using the stock bracket.

Fits: 4” x 7” Plates

9166 License Frame & Back Plate Set $19.99


CH

RO

ME

9171

This contemporary eagle license plate frame can be the final touch you need. The frame is chrome-plated ABS & backing plate is chrome-plated steel. The backing plate is drilled for universal mounting or it can be mounted in place of the stock license plate bracket on ‘97-’08 Road Kings (except ‘07-’08 FLHRSE), ‘98-’08 Road Glides, or ‘97-’08 FLHT Standards.

Fits: 4”x 7” Plates

3161 Swept Eagle License Plate Frame (ea)

$49.99

9182

Choose your Mount: Select P/N 9182 (pg 168) for universal applications, P/N 2098 (pg 50) for bikes with rear turn signal bars, or P/N 3164 (pg166) for bikes with fender tip lights

Choose a taillight lens without a clear license plate window (P/N 5450 or 5451 pg 51)

Choose a cover to take the place of the original license plate mount (P/N 3158, 3159, or 1320 pg 170)

3159

5450

9182



Combine with our Smoke Laydown Taillight Lens or Laydown Replacement Lens for a

look that’s totally custom! See Pg 51

P/N 5450 or 5451

Show your American pride with this beauty! This universal plate frame features a chrome-plated ABS outer frame & chrome-plated steel backing plate. The backing plate is drilled for universal mounting or it can be mounted in place of the stock license plate bracket on ‘97-’08 Road Kings (except ‘07-’08 FLHRSE), ‘98-’08 Road Glides, or ‘97-’08 FLHT Standards.

Fits: 4”x 7” Plates

3160 Lone Eagle License Plate Frame (ea) $49.99

Here’s a great universal Curved License Plate Frame for custom or stock fenders. It includes a chrome backing plate & outer frame with built-in L.E.D.’s to illuminate the license plate. It’s a great way to relocate a license plate below the taillight!

Fits: Universal applications with 4” x 7” license plates – Installation requires drilling mounting holes

9182 L.E.D. Lighted Curved License Plate Frame (ea) $103.99

Patent Pending

This “frame-up” leaves no chance for mistaken identity! With its gentle curved contour & snug, fender hugging mount, this new license plate frame has a distinctive look all its own. For even more sizzle, red L.E.D. accent lights operate in run/brake, or run/turn modes. White L.E.D.’s provide additional plate illumination at night. A perfect complement to Panacea Taillights & Run, Turn, or Brake Controllers, this plate ties right in for all 3 functions. Designed to fit 4” x 7” plates.

Fits: Any H-D Model with the standard 3-bolt fender mounted license plate bracket (Dyna, Sportster, Heritage, Fat Boy, etc.)

3166 Lighted Curved Laydown License Plate with Accent Taillights (ea)

$124.99

9023

9005

9007


CH

RO

ME

In the past, if you wanted a cool, custom side-mount license plate you paid through the nose. Our product brings the price down to reality without compromising style & function. Choose your plate then get the correct Mounting Clamps. Sized to fit 4” x 7” plates only.

9023 Lighted Curved Horizontal Side Mount (ea) $119.99

9005 Lighted Curved Vertical Side Mount (ea) $114.99

9006 Lighted Flat Vertical Side Mount with Taillight (ea) $135.99

9007 Lighted Curved Vertical Side Mount with Taillight (ea) $155.99

Note: Mount Clamps required for installation - Sold separately (below).

Required for installation of Küryakyn Side Mount License Holders.

3183 Fits: ’86-’10 Softail (except FXCW/C) without Küryakyn Swingarm Covers (ea) $29.99

3184 Fits: ’86-’10 Softail (except FXCW/C) with Küryakyn Swingarm Covers (ea) $29.99

3188 Fits: ’08-’10 FXCW/C & ‘09 FXSTSSE (ea) $49.99

3185 Fits: ’90-’05 Dyna Models (ea) $29.99

3187 Fits: ’06-’10 Dyna Models (ea) $39.99

3186 Fits: ’86-’10 Sportster Models (ea) $29.99

3175 Fits: Universal for 1-1/4” diameter tubing (ea) $31.99

Note: Please check local laws regarding side mount license plates before ordering.

3187

3188

9005

9006

This small chrome display bracket mounts cleanly in any location dictated by local or state regulations. Now you don’t have to mess up a nice paint job

or chrome surface with some cheesy government sticker. Universal fitment.

9168 Inspection Plate 3-1/2” x 3-1/2” (ea)

$41.99

9162 Texas Inspection Plate 2-7/8” x 4” (ea)

$41.99

Mount auxiliary marker lights or turn signals to your license plate. This simple system mounts directly to the back of your license plate with support backing plate & two side mount brackets. The side mount brackets have a 3/8” hole & will accept Küryakyn Silver Bullets or L.E.D. Mini Bullets (See pgs 44-47).Note: Great option for allowing the mounting of saddlebags on bikes that need to relocate turn signals.

4247 License Plate Marker Light Mount (ea)

$39.99

Lights Not Included


3158

Each License Plate Illuminator has two L.E.D.’s. The white L.E.D. lights up the license plate & the rear-facing red L.E.D. can function as an auxiliary running light, turn signal, or brake light for added visibility. The 1/4”- 20 mounting stud makes it simple to bolt them on, wire them in, & ride on!

9399 L.E.D. License Plate Bolt Lights with Red Accent Light (pr)

$31.99

Light up your license plate whether it’s in the stock location or custom mounted with these white L.E.D. bolt lights. You won’t find a cleaner license plate lighting option with a simpler installation.

9199 L.E.D. License Plate Bolt Lights (pr) $19.99

Note: 1/4”-20 Mounting Stud.

With so many riders using our Side Mount License Plate Mounts

or relocating their license plate below the taillight, we needed to come up with an appealing way to cover the exposed holes left in the fender after the stock license

plate bracket is removed. Both covers install in minutes & completely cover the footprint left by the stock mount.

Fits: All H-D Models with standard 3-bolt fender mounted license plate bracket (both styles also cover the fourth hole found on some Dyna & Sportster Models)

3158 License Plate Mounting Hole Cover with Emblems (ea)

$31.99

3159 Tribal License Plate Mounting Hole Cover (ea)

$20.99

Luggage

Air Management

Passenger Comfort

Backrests & Racks

Trailer Hitch

Touring Accessories

Secure a Bag to a Backrest with or without a Luggage Rack. Attach Y-strap to bag by pulling the two small pieces through the D-rings on top of the bag. Place the Y-strap over the backrest & insert it through the lower D-ring pulling tight, securing hook-&-loop.

Used to Help Secure the Grancruise Bag. Loop one end around a D-ring on the top of the bag, run strap up & around the neck of the motorcycle & back down to the top D-ring on the other side of the bag.

Attach a Bag to a Backrest, Luggage Rack or other Secure Anchor Point. Attach the clip to a D-ring, open the hook-&-loop end, route strap over, under or around a secure anchor point & through a D-ring on the opposite side of the bag. Pull the strap tight & fold on itself to secure.

Attach a Bag to a Luggage Rack on a Tour-Pak. Slip hook-&-loop strap through D-ring & around luggage rack. Hold one end of the strap stationary while pulling the other end to tighten the loop. Once taut, wrap the strap over itself, rolling until it’s wrapped completely around itself. (Can also be used to hook a bag to solo rack or to arms on backrest.)

Used with the Mini GranTour Bag. Hook the female end of strap to the male end, hook around backrest or luggage rack & plug male end into female end. Pull tight.

Attach a Bag to a Sissy Bar with a Luggage Rack or Passenger Seat. Pull hook-&-loop apart. Wrap the right side around backrest first, pulling tight & tucking any excess behind backrest. Then fold left side over & pull tight.

Tighten a Bag to a Backrest, Luggage Rack or Seat. Clip the metal hooks to a D-ring, loop strap around a secure anchor point & back to another D-ring on the bag. Pull strap to tighten & tuck in excess length. For a well-secured load, hook two straps to a forward location & two to a rear location.

Attach a Bag to a Passenger Seat. Remove seat, adjust pad for width of

seat. Place mount on fender & attach seat over the top of it. Place bag on seat & attach the straps, pull tight from the mount to the D-rings on the bag.


BagAdjustable Strap with Metal Clips

Hook-&-Loop Straps w/Metal Clip

8” Hook- &-Loop Straps Y-Strap

Shoulder Strap

Secure Adj. Hook-&-

Loop Strap

Underseat Mount

50” Hook- &-Loop Strap

Strap w/Buckle

GranTour x x xGranTailgater x x xGranCruise x x x xGranTraveler x x xGranThrow-Over Saddlebags x xMini GranTour x x x x xUltra Tour x x xFull Dresser x xCustom Roll x xGrand Roll xClassic Tour x x xDaily Tour x x x xTour Trunk Roll x x xTombstone x xCooler Bag x x x

Need major storage? Here’s the answer. With its large center compartment & 2 large end compartments per side, pack away! Still need more room? Expand each end compartment 2” for that extra room. With its semi-rigid construction this bag holds its shape no matter how much you pack. Perfectly sized, this bag provides back support for the rider when mounted on the passenger seat. Lean back & enjoy. Plenty of sturdy D-rings allow you to bungee additional items to the bag or lock the side pocket zippers if needed (small padlock not included). The weather is little threat with traditional Küryakyn weather resistant construction & self-sealing zippers. This bag provides ample protection for your items. Use the convenient shoulder strap for carrying the bag after a long day of riding.

Fully zipped end doors & large hatch allows ample access to main compartment from most sides

Expandable side compartments provide extra room when you need it

Waterproof zippers with large, glove-friendly pulls

1200 Denier construction for durability

Wide hook-&-loop belt securely attaches bag to any backrest

Included Items: Bag, Shoulder Strap, Two Adjustable Universal Straps & Rain Cover

Dim: 16-1/2” High x 16” Wide x 15” Deep (Expands to 20” Wide)

Cubic Inches: 3,960 Expanded: 5,280

4148 Ultra Tour Bag $139.99

For A Great Touring Combo, Combine Our Ultra Tour Bag & DailyTour Bag

(Shown Below- Sold Separately)

4148

4133

Bags Sold Separately

Included Straps

Included Straps

Super Secure Adjustable Strap


TO

UR

IN

G

The perfect day bag! The Daily Tour Bag provides just enough room for items needed on a full day or overnight journey. The semi-rigid bag holds its shape empty or full & mounts about anywhere on the back of your bike.

Tour-Pak luggage rack (Works great on large or small Tour-Pak racks)

Backrest with or without a luggage rack (with 10” of clearance from the top of the backrest down)

Solo luggage rack

Acess From Both Sides

Large front hatch & end hatch allow ample access for loading & unloading

Side pockets for additional storage

Waterproof zippers with rain cover

1200 Denier & semi-rigid construction for durability & shape retention

Included Items: Bag, Shoulder Strap, Adjustable Universal Straps, “Y” Strap & Rain Cover

Dim: 12” Long x 10” High x 15” Wide

Cubic Inches: 1,800

4133 Daily Tour Bag

$114.99

Doesn’t Require Luggage Rack

when Mounting on Backrest

All 4 End Pockets Expand

2”


With multiple mounting options (sissy bar, luggage rack, or passenger seat) this versatile bag is the

ultimate companion for weekend trips or short tours. A semi-rigid internal framework serves two purposes.

It helps the main compartment hold its shape – even when empty – & it provides adjustable lumbar support

for the rider’s back. Large zipper pulls are glove-friendly. Retractable locking device keeps bag right where you want it. Made of 1200 Denier & leather, the weather-resistant GranTour Bag

comes with a rain cover for added protection.

Included Items: Bag, Passenger Seat Mounting Pad System, Adjustable Straps, Retractable Lock, Rain Cover, & Backrest Pad

Dim: 18” Tall x 14” Deep x 20” Wide

Cubic Inches: 3,744

4141 GranTour Bag $189.99

Included Straps


Expandable

Add music to your tailgating with speakers & amplifier specifically designed for the GranTailgater. Simply slide them into the speaker pockets & connect the standard headphone jack

to your iPod, personal CD player, MP3 player, etc. 4176



TO

UR

IN

G

4174

Turn your big game, camping trip or event into the ultimate experience with our GranTailgater Bag! Combining everything but the kitchen sink, this bag will provide you with a tailgate & cooler bag. Add a set of speakers with amplifier & you’ll have it all! Constructed with the quality materials you’ve come to expect from Küryakyn, this bag will soon become your favorite.

Pull out handle & wheels for easy transportation

Top & front access to main compartment & multiple external compartments

Transform two compartments into one main compartment when needed

Front of bag zips down with side supports to create a tailgate table for fun on the road

Removable cooler bag fits in bottom compartment & holds 6-12oz cans with ice

1200 Denier construction for durability - leather accents for style

9” Wide adjustable mounting strap

Adjustable driver backrest when mounted on passenger seat

Optional Speaker & Amplifier Set available separately

Included Items: Bag with Tailgate Feature, 6-Pack Cooler Bag, Adjustable Mount Straps, Rain Cover, & Backrest Pad

Dim: 21” Tall x 17” Deep (Plus 1-1/2” for Handle) x 24” Wide Cubic Inches: 6,402

4172 GranTailgater Bag $299.99

4174 Speakers & Amplifier for GranTailgater Bag (set)

$62.99

4176 Folding Chairs (pr) $31.99

“Let’s pull into the next wayside & have a cold one!” The compact, portable Cooler Bag secures to nearly any style of bike. Now you can relax, refresh & renew just about anywhere. The only thing not included is the “ahhhh!”

Insulated, water tight interior

Holds 12-12oz cans with ice

Expandable front storage pocket (Makes a great backrest when the bag is full)

Plenty of extra D-rings for strapping items to outside of bag

Convenient handle & shoulder strap

Super secure hook-&-loop backrest mounting strap

Semi-rigid back & bottom for secure mounting & shape retention

Universal bottle opener, cork screw, & knife accessory tool

Included Items: Bag, Shoulder Strap, Four Adjustable Universal Straps, Universal Opener, & Rain Cover

Dim: 10 -1/2” Long x 12” High x 12” Wide (Front Pocket Expanding from 2-1/2” to 5”)


4132 Cooler Bag $89.99

Included Straps

Included Straps


Expandable

U.S. Patent 6,802,440

Here’s a bag that does double duty. Designed from the start to serve as both a rigid frame backrest & a bag, the Tombstone Bag provides solid lumbar

support & a handy place to store essentials. Zippered pockets, clips & pouches inside the bag keep everything organized & easy to find. The Tombstone Bag is designed to fit on all

motorcycles with a passenger backrest. A dual adjustable hook-&-loop strap

system goes through & around the solid PVC frame

to attach securely to the backrest.

Included Items: 1/2” Pad, 2” Pad, 3” Pad, Inside Frame (Removable for Helmet Storage), Inside Pocket with Elastic Straps, Inside Pocket with Mesh Front, Two Side

Bags, Rain Cover, Four Straps with Clip & Shoulder Strap

Dim: 12” Long x 12” High x 9” Wide

Cubic Inches: Without side bags 1,296, with side bags 2,066

4143 Tombstone Bag $159.99C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4


Create a complete set of travel bags when you add our convenient saddlebags! See Pg 177

P/N 4171

Mount on a Passenger Seat

Mount on a Tour Pak Luggage Rack

Mount on a Luggage Rack as a Tour Trunk

Mount the GranTraveler as a tour trunk or on top of your tour trunk for extra storage room. The semi-rigid construction & adjustable universal straps add ease when securing this bag to your motorcycle either packed full or empty. Additional internal & external compartments offer you multiple options for packing as well. For the serious motorcycle traveler, it’s hard to beat.

Stylish motorcycle & airplane carry-on luggage all in one

Pullout handle & wheels add ease to transport to & from motorcycle

Expandable top gives you the extra room when you need it

Two removable end bags with straps or belt clips to take items with you

Weather-resistant 1200 Denier construction with leather accents for function & style

Included Items: Bag with Two Removable End Bags, Waist/Shoulder Straps for End Bag, Rain Cover & Adjustable Universal Straps

Dim: 17” Long x 22” Wide x 11” Deep (Expands to 12-1/2” Deep)


4149 GranTraveler Bag $199.99

Included Straps

Included Straps

Pull Handle

Expandable 1-1/2”

Add convenience with these great saddlebags! Install in seconds without adding any bulky accessory mounts to your motorcycle. These universal saddlebags are true throw-over saddlebags. Simply adjust the mounting belt & throw them over or under the passenger seat. Use the included universal straps to finish off the mounting & minutes later you’re off on your next ride! Coordinate these saddlebags with any other Küryakyn motorcycle luggage & ride on fully loaded with all the storage room you need.

Throw-over convenience - mount or remove in seconds

No saddlebag supports or mounting brackets required

Collapsible hidden drink holders

Internal & external accessory pockets

Fully adjustable to fit almost any motorcycle

Expandable main compartment for extra space

Heat-resistant material on bottom of bag

Weatherproof construction & included rain covers

1200 Denier construction with leather accents for durability & style

On top of passenger seat with slant forward or backward

Under passenger seat with slant forward or backward

Full mounting options for motorcycles with turn signals mounted at the end of the rear fender or applications with Small Silver Bullet turn signals (pgs 24-26)

Included Items: One Pair of Saddlebags, Rain Covers & Adjustable Universal Straps

Dim (Each): 24” Tip to Tail Slanted Saddlebags, 12” Tall x 8-1/2” Wide (one end Expands to 11” Wide)

Cubic Inches: 2,448 per bag Expanded: 3,168 per bag

4171 GranThrow-Over Saddlebags $229.99

Note: Applications with larger turn signals mounted to fender struts may limit the number of mounting options. Depending on the specific mounting, these bags may limit access to passenger footpegs.

Included Straps


TO

UR

IN

G


Expandable 2-1/2”

The Full Dresser Bag is still the most complete, versatile piece of motorcycle specific luggage available. Its unbelievable features make packing for a two-wheeled adventure more convenient & practical than ever before. This top quality, fully lined 1200 Denier construction bag provides unparalleled strength & protection from the elements. The Full Dresser Bag is hands-down the best choice for the serious motorcycle traveler.

No unpacking - gain access to items packed on top or bottom by way of a unique wrap-around heavy-duty zipper

Mesh inside pockets & heavy-duty quick-snap buckles operate even with gloves on

Super-secure 9” wide mounting strap mounts to any backrest

Mount to a variety of locations quickly & easily with a variety of straps & D-rings

Rigid plastic molded insert provides added stability to keep clothes neat & wrinkle free & ensures bag will sit nicely & ride smoothly while empty

Enough room for two leather jackets or a full-face helmet in expandable top - folds neatly away when not needed

Two adjustable straps let you tie bedrolls, tents, or jackets above the roomy top compartment

Sturdy wheels provide quick & easy mobility

Large 3-1/2” side compartments contain reinforced piping & waterproof zippers

Included Items: Bag, Adjustable Universal Straps, & Rain Cover

Dim: 12” Wide Main Compartment (Overall Width 18”), 10” Deep x 18” Tall (Top Compressed), or 25” Tall (Top Expanded)


4140 Full Dresser Bag $199.99


All the Convenience of a Two-Piece Luggage System in One! No Need

For Extra Pieces to Track, Just Fold Out the Expandable Top When Extra

Room is Needed!

Compressed

Expanded


Expands 4”


TO

UR

IN

G

Expand Center Compartment to 1-1/2 Times It’s Original Size! Semi-Rigid

Support Holds It’s Shape So Compartment Does Not

Collapse!

Mount Directly on a Tank

Mount Off the Back of a Backrest without a

Luggage Rack Mount on a Luggage Rack

If you want a small, nice looking bag that holds its shape & is great for the basics - This is the one! With a windowed top pocket, multiple storage organizers & expansion capabilities, this bag has it

all. To top it off, you can mount it about anywhere – luggage rack, backrest, or atop your gas tank!

Middle compartment with organizer pockets & expandable lower compartment

1200 Denier & semi-rigid construction for durability & shape retention

Leather accents for style

Included Items: Bag, Shoulder Strap, Soft Tank Pad, Side Pocket & Bottle Holder, Universal Mounting Straps, “Y” Strap, Rain Cover

Dim: 11” Long x 11” Wide x 4-1/2” Deep (Expands to 7-1/2” Deep)

Cubic Inches: 545 Expanded: 908

4139 GranCruise Bag $99.99

Note: Requires 10” of clearance from the top of the backrest down when mounting without a luggage rack.

Included Straps

Expands 3”

The convenience of a stylish motorcycle bag & backpack in one. Simply unzip the Mini GranTour Bag from its mounting pad & take this standard size backpack with you by comfortably throwing it over your shoulder with the included straps. When you need additional space, simply expand the main compartment to 1-1/2 times its height, pop up the internal supports, & keep on packing.

The center compartment expands to 1-1/2 times original size with pop up semi-rigid support to hold its shape

Large enough to hold most helmets

Padded backpack straps with waist strap

Can be mounted on a backrest without a luggage rack

1200 Denier construction for durability with leather accents for style

Included Items: Backpack Bag with Motorcycle Mounting Pad, Padded Shoulder Strap, Rain Cover, Adjustable Universal Strap & Adjustable Mounting Strap, Y-strap

Dim: 14” Long x 14” Wide x 8” Deep (Expands to 12” Deep)

Cubic Inches: 1,568 Expanded: 2,352Note: Requires 10” of clearance from the top of the backrest down when mounting without a luggage rack.

4167 Mini GranTour Bag $159.99 Included Straps

MP3 Player PocketConcealed Rain Cover

40 Watt Speaker

Patent Pending

Infuse your ride with style, music & storage with the innovative new Cranker Tank Bag from Sportech. The next level of

moto-luggage, the Cranker Bag features an integrated amplifier, speaker & MP3 capability so you can take your music with you while

honing your favorite stretch of tarmac. Plus, the Cranker Bag provides storage for all your riding essentials in a sleek, semi-rigid molded design,

which maintains its shape even when empty.

Speaker specially tuned for optimum sound at highway speeds Sleek low-profile design will not interfere with rider Powered from your bike or 4AA batteries 3-High powered magnets hold bag securely in place Optional mounting straps for plastic tanks & added versatility Non-scratching rubberized backing protects your bike’s finish

Dim: 13” Long x 8” Wide x 4” Deep

4161 Cranker Tank Bag $169.99

Note: Not recommended for use with excessively loud pipes or for use at high speeds.


Add the convenience of a universal mount roll bag with expandable main compartments for when you need that extra storage room on the road. With three separate compartments & a storage area of 8” diameter by 19”L expanding up to a 23” length, pack all the items you need. With its semi-rigid construction, this bag holds its shape either empty or packed full.

Zippered ends & large hatch allow access to main compartment from almost all sides

Expandable main compartment provides extra room when you need it & keeps the bag narrow when you don’t

Waterproof zippers & rain cover


Universal mounting straps provide endless mounting options

Can be mounted on a backrest without a luggage rackNote: Requires 10” of clearance from the top of the backrest down when mounting without a luggage rack.

Included Items: Bag, Rain Cover & Shoulder Strap, Y-Strap

Dim: 8” Diameter x 19” Length (Expands to 23”)


4166 Custom Roll Bag $109.99

Included Straps

The Classic Tour Bag is not your traditional roll bag. Place it on your luggage rack & securely fasten it to your sissy bar with its wide hook-&-loop strap. Place it on your passenger seat & it’s perfectly sized to provide lumbar support for the rider. With its large center hatch & zippered ends you can gain access to the main compartment from almost any side. Expand the end compartments when you need that extra room & pack away. The weather is little threat with traditional Küryakyn weather resistant construction & new self sealing zippers. For those severe storms simply throw on the fully protective rain cover. The Classic Tour Bag provides ample protection for your items.

Zippered ends & large hatch allow access to main compartment from almost all sides

Expandable side compartments provide extra room when you need it & keep the bag narrow when you don’t

Waterproof zippers with large glove-friendly pulls


Wide hook-&-loop belt securely attaches bag to any backrest

Convenient shoulder strap makes it easy to carry into the hotel after a long ride

Semi-rigid construction provides support so the bag retains its shape – even when empty

Included Items: Bag, Shoulder Strap, Two Adjustable Universal Straps & Rain Cover

Dim: 12” Long x 11” High x 21” Wide (Expands to 24”)


4144 Classic Tour Bag $139.99

Each End Expands

1.5”


TO

UR

IN

G

Included Straps


Designed to rest on the luggage rack or sissy bar rack, the Tour Trunk Roll Bag features a large clamshell-style lid that opens wide for easy access to packed items. A hook-&-loop closure secures the front flap. A retractable locking device lets you lock the bag to the bike. A cargo net on the inside of the lid keeps weather-proof items handy. Made of 1200 Denier & leather, the Roll Bag holds its shape even when empty. Looks great on Dressers!

Included Items: Bag, Retractable Cable Lock, Mounting Straps & Rain Cover

Dim: 10” Tall x 12” Deep x 19” Wide Cubic Inches: 2,280

4142 Tour Trunk Roll Bag $169.99

Included Straps

Mount virtually any Küryakyn Motorcycle Luggage, or similar luggage with D-rings on lower portion of bag, with our Universal Bag Mounting Kit.

1 - Universal Adjustable Under Seat Mounting Pad

2 - Universal Adjustable Fold-Over Hook-&-loop Straps with Securing Metal End Hook, 36” Long by 1” Wide (Working Length 26”)

2 - Universal Hook-&-loop Straps, 8” Long by 1” Wide

4 - Universal Adjustable Strap with Clips & Securing Metal End Hook, 32” Long by 1” WideNote: Under seat motorcycle pad not suggested for use with 4140 Full Dresser Bag when expanded or other bags taller then 18”. Under seat mounting pad requires a smooth or recessed surface under passenger seat. Not suggested for H-D V-Rod, Badlander style seats, or passenger seats that are smaller than 6” wide & 1.5” thick.

4175 Universal Bag Mounting Kit $51.99

by C.E. Smith Inc. U.S. Patent 6,299,042

Make the difficult task of attaching luggage to your bike a thing of the past! The Touring Bag Support holds your luggage neat &

upright for a more balanced load & prevents bags from sagging over onto your fenders

or turn signals. Made of engineered polymers for strength & durability, it easily attaches with the included

industrial grade-exterior hook-&-loop straps with large mounting holes that allow limitless mounting points for your luggage. Large enough to accommodate even the largest of bags, yet mounts without looking bulbous & awkward.

7146 Touring Bag Support (ea) $49.99

These are without question a must for people who really ride. Each guide is very informative & easy to follow, advising you of the best places to stay, eat & see. Use one & you’ll never travel without it again.

40 Midwest Edition: Iowa, Minnesota, Wisconsin, Michigan, Indiana & Illinois (200 pgs)

$19.99

42 Appalachian Edition: Kentucky, West Virginia, Virginia, North Carolina & Tennessee, plus sections of five adjoining states (200 pgs)

$19.99


No need to awkwardly bungee items to the front of your bike anymore. Conveniently add storage space with our stylish Grand Roll Bag. Designed with universal mounting straps, this bag straps conveniently to your handlebars or anywhere else you want to strap it. This 8” diameter by 16” long bag gives you space to carry those additional items you need without a luggage rack or sissy bar. Its semi-rigid construction maintains its shape while securely fastened to your motorcycle whether it’s stuffed full or empty. The mesh end compartments give you a place to stuff those items you need to get at quick. In traditional Küryakyn design, weather is no match for this roll bag. Fully weatherproof, it contains an internal nylon shell & full rain cover for even more protection from severe weather.

Additional storage space for the front of your bike

Easy mounting with no need for sissy bar or luggage rack

1200 Denier construction with leather accents

Included Items: Bag, Rain Cover & Shoulder Strap

Dim: 8” Diameter x 16” Long Cubic Inches: 1,024

4146 Grand Roll Bag $119.99 Included Straps

Add storage & an electrical power point/cigarette lighter that mounts directly to the back of your windshield. Keeping low enough to not obstruct your vision & with two rubber lined closable compartments, you will love being able to have items at your fingertips. We updated the original Pod with a black rubber top seal, slotted mounting holes, & additional hardware for universal fitment.

Fits: All ’94-’09 Road Kings & Heritage with H-D Windshields, Memphis Slims & Fats or other Models with 5-13/16” to 6-1/2” center-to-center spacing from center bolt out to second bolt (Not intended for use with Küryakyn AirMaster Quick Release Windshields)

1419 The Pod II (ea) $109.99

Note: Wiring harness with connectors & fuse included. Works great with Quick Detach Windshields.

A l w a y s m a k e s u r e l o o s e e n d s o f y o u r

m o t o r c y c l e l u g g a g e ’ s t i e - d o w n s t r a p s a r e

s e c u r e l y t u c k e d a w a y s o t h e y d o n o t g e t c a u g h t

i n m o v i n g p a r t s .

Lightweight, compact & water-resistant bike covers offered in full or half sizes. A soft fabric liner protects your windshield & fairing from abrasion. The bottom panels are heat/scorch resistant & includes an elastic hem coupled with reinforced grommets & shock cords to ensure great fit.

4120 Black PrimoShield Full Cover (ea) $69.99

4122 Silver PrimoShield Full Cover (ea) $69.99

4121 Black PrimoShield Half Cover (ea) $49.99

4123 Silver PrimoShield Half Cover (ea) $51.99


TO

UR

IN

G

4118

4119Saddlebag lids can really take a beating. How many times have you or your passenger dragged your boot heel across them as you’ve swung a leg over the seat? Slip on a pair of Saddlebag Lid Covers & these little mishaps won’t be a big deal anymore. Soft, matte-finished black vinyl with a felt-like lining helps prevent scuffs, nicks & abrasions, & looks great too!

Fits: ’93-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings with hard saddlebags

4118 Plain Saddlebag Lid Covers (pr) $79.99

4119 Zombie Saddlebag Lid Covers (pr) $89.99

®

Your Tour-Pak is a big, open space. Organize it with our Tour-Pak Liner. The best part? When you get where you’re going, you can unload everything in one trip. Just grab the handle & pull the liner out, then sling it over your shoulder & carry it to wherever you’re staying.

4177 Removable Liner for H-D Tour-Pak (ea) $54.99

®

Is your Tour-Pak beginning to resemble the junk drawer in the kitchen? At least keep important or

fragile items at your fingertips with the Lid Organizer Bag. A variety of padded & see through mesh compartments offer

protection & easy accessibility for frequently used items. Who says you can’t take it with you? Quick disconnect hook-&-loop & handles make it easily portable.

Included Items: Lid Organizer Bag, Hook-&-loop Mounting Strips, 5” x 7” Mirror

Dim: 13” x 20” (open)

Fits: H-D King, Ultra, or Chopped Tour-Paks (Does not fit leather Tour-Paks)

4134 Lid Organizer for H-D Tour-Pak (ea) $41.99


After a long day in the saddle you want to easily grab your things & get to where you’re spending the night. These removable Saddlebag Liners not only keep things organized, they have handles & a shoulder strap to make unloading & carrying your luggage quick & easy.

Fits: All H-D OEM hard & leather Road King saddlebags

4170 Saddlebag Liner (pr)

$64.99

QUICK RELEASE WINDSHIELDS

PG 20

AIRMASTER® FAIRING PG 186-187

SPORT WINDSHIELD PG 188

TOURING WINDSHIELD PG 188

DRAGON WINGS PG 190

SPORTECH FAIRING-PLUS

PG 17

SADDLE SHIELDS PG 190-191


RIDEIN COMFORT

Küryakyn has teamed up with some of the best names in the business to bring you more! Our new fairing has not just caught up with, but is ahead of its time. While not losing touch with traditional styling, our fairing adds subtle & classy styling improvements to set your bike apart from the crowd. The impressive list of features & long list of optional accessories make this the best fairing on the market!


Rockin’ Stereo with Multiple

Audio Inputs

Sealed, Lockable Storage with 12V Power (iPod & 3.5mm Cables Included

with Deluxe Fairing)

Gloss finish color-matched to H-D Vivid Black on outer fairing – choose to leave it black or have it custom painted to match your bike

Lightly textured black inner fairing resists finger prints & other marks Cigarette lighter/12V power point (left side of inner fairing) 4” Dark smoke windshield (interchangeable with any ’96-’09 Electra Glide windshield) Chrome mounting brackets Glove Compartment featuring:

Sealed, lockable storage with room for several CDs Rubber mat keeps items from shifting; Easily removable for cleaning Built-in cigarette lighter/12v power point Door marked for easy installation of GPS mount cradles (4-hole AMPS pattern)

Küryakyn Stereo with multiple audio inputs CD & AM/FM – 30 presets (18 FM, 12 AM) Direct control of most iPod - includes power/interface cable

routed into Glove Compartment for safe, secure transport of your iPod

Front SD card slot, USB port, & 3.5mm auxiliary input jack One pair of RCA pre-outs (rear) RCA auxiliary input (rear) 5” x 7” Speakers specifically designed & tuned for use on a

motorcycle by Hogtunes, Inc -No off-the-shelf car audio speakers!

Stereo Cover Included to Protect from

Weather or Washing

®

1330 Fits: ’94-’10 Road Kings (except ’04-’07 FLHRS) (ea)

$1,999.99

1332 Fits: ’86-’10 Heritage, ’93-’96 FLSTN, & ’05-’10 Deluxe (ea)

$2,099.99

Note: Installation of Fairing is possible on ’04-’07 FLHRS & ’90-’10 Fat Boy, however it requires removal of chrome wind deflector from headlight nacelle on FLHRS & the customer is responsible for relocation of stock, handlebar mounted turn signals & sourcing hardware necessary for installation.

®

1322 Küryakyn Stereo with iPod Cable (ea)

$249.99

1321 Küryakyn 5” x 7” Speakers with Grills (pr)

$134.99

1323 Cota Micro Screen Antenna (ea)

$29.99

1324 Replacement Speaker Grills (pr)

$24.99


TO

UR

IN

G


TO

UR

IN

G

W I N D S H I E L D T R I M S ( P / N ’ s 1 1 9 8 - 9 9 & 1 3 7 9 ) p g 1 0 & 1 2 5

H . I . D . H E A D L A M P ( P / N 2 2 5 3 ) p g 4 0

K Ü R Y A K Y N W I N D S H I E L D S ( P / N ’ s 1 3 5 5 - 5 9 & 1 3 6 0 - 6 2 ) p g 1 8 8 - 1 8 9

D R A G O N W I N G S ( P / N 1 1 1 7 ) p g 1 9 0

W I N D S H I E L D M O U N T E D M I R R O R S ( P / N ’ s 1 4 5 2 - 5 3 ) p g 7 9

D R I V I N G L I G H T S ( P / N ’ s 5 0 0 5 & 5 0 1 6 - 1 7 ) p g 4 & 4 3

Shown with Windshield Trim (P/N 1371 - 126)

14”21”

Provides excellent wind protection & unmatched style. Unlike anything you’ve seen before, this windshield allows you to get rid of the frumpy stock windshield & replace it with a piece that transforms the look of your bike from city bus to private jet. The windshield’s contours complement the lines of both the inner & outer fairing while directing the wind up & over the rider with minimal turbulence.

Made from light smoke, premium quality, hard-coated polycarbonate, it provides impact resistance not possible with acrylic shields. The bottom edge is masked for a neat appearance with or without our Windshield Trims.

Fits: ‘98-‘10 Road Glides

1364 AirMaster Touring Windshield for Road Glide (ea) $219.99

1361

1360


Patent Pending

Innovative design & exceptional style, what more could you want? Our windscreen creates a cockpit-like feel & streamlined appearance. Unlike other short windshields on the market, our Sport Windscreen directs air smoothly over the fairing resulting in constant, predictable wind pressure on your face without annoying buffeting & turbulence common to other short windshields.

Made from dark smoke, premium quality, hard-coated polycarbonate, it provides impact resistance not possible with acrylic shields. We’ve masked the bottom edge for an exceptionally clean appearance when installed by itself or when used with our Windshield Trim for an even cleaner appearance.

Important: Riders will feel wind pressure on their face. Windshield is 11-1/2” Tall from base to top & sits 2” higher than stereo surround. If wind protection is of primary importance & you do not like wind in your face, we suggest our Touring

version (P/N 1364).


1363 AirMaster Dark Smoke Sport Windscreen for Road Glide (ea)

$159.99

Shown with Windshield Trim (P/N 1370 - pg 126)

®

Küryakyn is fired up to offer these top-quality, custom windshields for H-D Touring Models. Custom-formed from premium materials using proprietary processes. Crown your bagger with the

coolest windshields available.

Manufactured from premium quality, hard-coated polycarbonate. Unlike acrylic, polycarbonate will not crack or shatter upon impact.

Widow, Zombie & Flame graphics are screen printed with proprietary inks making the images unbelievably sharp & durable at the same time.

Windshields are opaque. Take into account that you must maintain a clear line of sight over the windshield. The windshield should not obstruct your vision in any way.

Fits: ‘96-’10 Electra Glides, Street Glides & Trikes; Küryakyn Airmaster Fairing & Sportech Detachable Fairing Plus

1360 Widow Windshield (ea) $103.99

1361 Zombie Windshield (ea) $103.99

1362 Flame Windshield (ea) $103.99

1362

You’ve decked out your Bagger with enough chrome to blind a guy with welding glasses, now it’s time to do something about that stock, utilitarian windshield. This windshield is manufactured from premium quality, optically clear, hard-coated polycarbonate. Unlike acrylic, polycarbonate will not crack or shatter upon impact.

Fits: ’96-’10 Electra Glides, Street Glides, & Trikes; Küryakyn Airmaster Fairing & Sportech Detachable Fairing Plus

1355 4” Dark Smoke (ea) $77.99

1356 Light Smoke (ea) $77.99

1357 Dark Smoke (ea) $77.99


1359 Dark Smoke (ea) $79.99

1357

1356

1358


TO

UR

IN

G


Unmatched style with hidden fasteners & elegant contours. See Pg 10

P/N 1379

Patent Pending

Give your Electra Glide or Street Glide an entirely new look! This new Aerodynamic Windshield has an unmistakable look & improves wind protection at the same time. Short windshields definitely look cool, but the buffeting & wind noise can be annoying. Our design features a sweptback profile, a wedge-shaped raised center section, & a slightly flipped trailing edge.

Fits: ’96-’10 Electra Glides, Street Glides, & Trikes; Küryakyn Airmaster Fairing & Sportech Detachable Fairing Plus


1349 Clear (ea) $199.99

Shown with Zombie Windshield Trim (P/N 1198 - pg 126)

Your bike will look as tough as a junkyard dog with these knurled windshield mounting spikes. These 1/4”-20 x 5/8” spikes can be used to mount windshields on ’96-later Electra Glides, Street

Glides & Trikes as custom license plate hardware, or anywhere else you need custom 1/4”-20 screw.

1369 Windshield Mounting Spikes (set/3) $19.99

Deflect the cold wind away from in-between your legs on your Touring Model with our new air deflector. This beautifully chromed deflector replaces the original black wind deflector or makes a great addition to models that no longer have them from the factory.


1100 Lower Triple Tree Wind Deflector (ea)

$24.99

Guide airflow around the fairing for reduced turbulence during cool weather or open them for a refreshing breeze on those scorching hot days. Adjust to any of four different positions by hand via a spring-loaded mechanism. Shatter resistant polycarbonate construction.

Fits: ’96-’10 Electra Glides, Street Glides, Trikes; & Küryakyn AirMaster Fairing

1117 Reflective Smoke Dragon Wing (pr)

$119.99

1108 Dark Smoke Dragon Wing (pr)

$99.99

1119 Replacement Thumb Tabs (pr)

$10.99

U.S. Patent 6,854,542

Any of us that ride a Twin Cam Harley in warm weather know just how hot & uncomfortable the heat off the rear cylinder can get. These will cure that in a hurry. Contoured polycarbonate panels fit cleanly between you & the engine & do an amazingly effective job of keeping the heat off your legs.

Fits: All ’00-’10 Softail Models (except Deuce & Rocker/C)

1186 Reflective Smoke Saddle Shields for Softail (pr) $69.99


1117

Patent Pending

H-D’s Mid-Frame Air (Heat) Deflectors are functional, but they have a matte, industrial finish. These spicy little stick-on accents will liven them up instantly.

Fits: ‘09-’10 FLHTCU, FLHTCUSE, FLHTCUTG, ‘10 FLHTK & Touring or Trike Models equipped with H-D Mid-Frame Air Deflectors (H-D P/N 58002-09)

8674 Accents for H-D Mid-Frame Air Deflectors (pr)

$29.99

U.S. Patent 6,854,542

Even though Harley-Davidson has gone to great lengths to reduce the heat felt by the rider on the ‘09-’10 Touring Models, there is no getting around the fact that you are straddling 96” of V-Twin power. These patented heat shields are quick & easy to install & do an incredible job of keeping the heat generated by the rear cylinder off the inside of your thighs.


1316 Saddleshields, Reflective Smoke (pr)

$69.99

U.S. Patent 6,854,542

Ever sit in stop-&-go traffic or at that 4-way stoplight that never seems to change on a hot summer day & the heat coming off your motor is just about unbearable? Well, we have the solution with our frame mounted polycarbonate shields that are perfectly positioned on the frame to dissipate & re-direct the heat away from you & your thighs. On your next hot weather outing, let our Saddle Shields help you enjoy your ride no matter how hot!

1187 Fits: ‘97-’07 Electra Glides, Road Glides, Street Glides, & Road Kings (pr)

$59.99

1188 Fits: ‘97-’07 Electra Glides, Road Glides, Street Glides, & Road Kings (pr)

$69.99

1196 Fits: ‘08 Electra Glides, Road Glides, Street Glides, & Road Kings (pr)

$69.99

1313 Replacement Mounting Kit for 1196

$10.99

1314 Replacement Mounting Kit for 1187/1188

$15.99


TO

UR

IN

G

1196

1187

N o w A v a i l a b l e . . .

Bring some heat defense to your ride! See Pg 21

P/N 1317

1469

8989


8981

8982

8982

D o n ’ t M i s s . . .

Keep those important items at your fingertips! See Pg 22

P/N 4196

U.S. Patent D526,952 & 7,114,774

Travel in comfort & style with our Passenger Armrests designed specifically for H-D Dressers. Passengers can enjoy added comfort on those long rides. Swing-away design does not interfere

with the passenger mounting or dismounting the bike. A built-in cup holder keeps a cold (or warm) drink at their fingertips & includes a foam can cooler.

®

P/N’s 8989 & 8992 are compatible with Küryakyn Relocator Kit for Tour-Pak (P/N 1559).

8989 Fits: ‘98-’08 FLHTCU & FLHTC when equipped with rear speakers (set)

$289.99

8992 Fits: ‘98-’08 FLHTC without rear speakers (set) $280.99

8985 Replacement Can Cooler (pr) $5.99

®

Designed to work with King or Chopped Tour-Paks on H-D Detachable Two-Up Tour-Pak Rack (P/N 53276-04) or Solo Tour-Pak Rack (P/N 53260-02). Versions are offered for use with or

without Küryakyn Relocator Kit for Detachable Tour-Pak.

8981 Fits: ’94-’08 H-D Touring Models with Detachable Tour-Paks (set)

$359.99

8982 Fits: ’94-’08 H-D Touring Models with Detachable Tour-Paks & Küryakyn Relocator Kit (P/N 8986) (set)

$359.99

Note: P/N’s 8981 & 8982 are not compatible with H-D’s original Detachable Tour-Pak Rack design (H-D P/N 53107-96). This style of rack has a tubular frame topped with a flat plate.

Add this travel mug to your Küryakyn Can Cooler for the perfect fit in your Passenger Armrest drink holder.

1469 Stainless Steel Küryakyn Travel Mug (ea)

$17.99


TO

UR

IN

G

® U.S. Patent 6,817,501

Gain a few extra inches for going those extra miles. This handy kit moves the Tour-Pak back 2” to provide more room for your passenger. The added space makes things much more comfortable for the passenger & makes climbing on & off much easier, especially if the bike is equipped with a driver backrest.

Fits: ’98-’08 Touring Models equipped with Rigid Mounted H-D Tour-Pak

1559 Relocator Kit for Tour-Pak (ea) $199.99

Note: Not compatible with amplifiers included in H-D’s “Enhanced Sound System” or stock on Screamin’ Eagle Models.

®

Now, the comfort & additional room provided by our patented Relocator Kit for rigid mounted Tour-Paks is available for riders using H-D’s detachable version.

As designed, H-D’s Detachable Tour-Pak provides three positions: Full Forward, 1” Back, & 2” Back. Our Relocator Kit effectively shifts this range of adjustment back an additional 2” allowing you to select a position 2” back, 3” back, or 4” back relative to the original full forward position.

Fits: ’97-’08 Road Kings, FLHT, FLHX, & FLTR Models equipped with H-D Two-Up or Solo Detachable Tour-Pak Racks (H-D P/Ns 53276-04 or 53260-02) & King or Chopped Tour-Paks

8986 Relocator Kit for Detachable Tour-Pak (ea) $135.99

Note: Not compatible with H-D’s original Detachable Tour-Pak Rack design (H-D P/N 53107-96). This style of rack has a tubular frame, not stamped as shown.

Rendering Shown

1484

1485

Rendering Shown

There’s nothing better than a hot cup of coffee on a cold morning or an ice-cold bottle of water on a hot summer day. Küryakyn Passenger Drink Holders fasten securely to the passenger grab rails on H-D Touring Models. Two styles are available, a mounting ring with stainless mug or a basket that will hold just about any can, bottle or cup. The clamp fastens securely to the 1/2” diameter passenger grab rails found on Electra Glides & Tour Glides or can be mounted universally on any 1/2”, 5/8”, or 3/4” tubing.

1484 Passenger Drink Holder with Basket (ea) $59.99

1485 Passenger Drink Holder with Stainless Mug (ea)

$59.99

Note: Replacement cups & baskets are available (see pg 69).

Our spring-loaded seat release latch makes changing your seat or accessing the components under the seat a snap. A spring-loaded latch nestles in a smoothly shaped housing that covers the seat’s mounting tab. Installation is easy & requires no modifications to the fender or seat. Special mounting screw is 1/4”-20 thread (included).

9037 Speed Tab Seat Latch (ea) $20.99



See various Handlebar Accessory options to outfit your ride with convenience! See Pg 69-71

P/N 1423

Patent Pending

Part of the thrill of riding a motorcycle is the control & connection to the machine during cornering, acceleration, & braking. But for the passenger the same maneuvers can be a little more spine-chilling than enjoyable. We’ve developed these beautifully chromed & padded Passenger Grab Rails to provide a similar feeling of control & security. You’ll have happier passengers as well as a great additional place to secure small packages, jackets, etc.

Fits: ‘99-’10 Electra Glides, Road Glides, Street Glides & Road Kings

1609 Passenger Grab Rails for H-D Touring (ea) $159.99

Take the hassle out of removing your seat. A smooth chrome cap dresses up the seat mounting tang & a knurled chrome screw holds everything in place. No tools required. Combo Kit includes tang cover & both 1/4”-20 & 1/4”-28 threaded screws. Works well on almost all bikes & seats. Installation on ‘99-newer bikes requires removal of stock captured thumb screw.

9035 Seat Screw & Beauty Cap Combo $20.99

9038 1/4” - 20 Knurled Screw Only (ea) $12.99

8988

U.S. Patent D415,980 & 5,984,331

Here’s the easy solution for the rider who carries a passenger but doesn’t like the look of conventional side plates. The Plug-N-Play bolts to the rear fender underneath the passenger seat. It accepts our low, custom Sissy Bar (P/N 8980) & Backrest Pad (P/N 1605) for passenger comfort & convenience. The backrest & pad measures 6-1/2” wide & 9-1/2” high from the rear fender.

8998 Plug-N-Play (ea) Fits: H-D Models with 130mm, 140mm, or 150mm tires (Softail, Dyna, Sportster, FXR) (ea)

$187.99

8983 Plug-N-Play (ea) Fits: ’07-’10 Fat Boy & Jesse James Custom Fenders (ea)

$176.99

8984 Plug-N-Play (ea) Fits: ’06-’10 FXST Models with 200mm Tires (ea)

$176.99

8980 Sissy Bar (ea) $63.99

1605 Backrest Pad (ea) $64.99

Note: Each Plug-N-Play assembly is pre-drilled, but does not include mounting hardware. Sissy Bar & Backrest Pad come with all necessary mounting hardware.


TO

UR

IN

G

1605

8980

8987

8998

If bike parts received Oscar’s, we’d nominate this one for best supporting role. The Driver Backrest for Softails can add miles of comfort to a day’s travel. The rider enjoys a reach to the controls tailored to their stature, as well as backrest angle & height adjustments. For passenger convenience, pad assembly folds forward for easy seating. Quick detach mechanism permits fast installation & removal of hoop & pad assembly.

8987 Fits: All ’93-’10 Softails (except ‘00-’07 Deuce, ’06-’10 FXST/B/C/S, ’07-’10 Fat Boy & ‘08-’10 Rocker/C) (ea)

$279.99

8988 Fits: ‘06-‘10 FXST, FXSTB, FXSTC, FXSTS, & ‘07-‘10 FLSTF/B (ea)

$279.99

8-3/4”

Forged for strength & rigidity, then polished & chrome-plated for beauty. Stylized inserts on the cross member look cool & cover holes used to mount Iron Cross L.E.D. Light. Approximately 12” tall.

Fits: Softail: H-D Rigid or Detachable Side Plates on all ’84-’05 Softails (except Deuce) & ’06-’10 FLST Models (except ’06 FLSTFSE, ’07-’10 FLSTF, ‘10 FLSTFB, ’08-’10 FLSTSB). Also compatible with Küryakyn Side Plates (P/Ns 8971 & 8972). Dyna: H-D Rigid or Detachable Side Plates on all ’06-’10 Dynas (except ’08-’10 FXDF, ‘09-’10 FXDFSE) Sportster: H-D Detachable Side Plates on all ’04-’10 Sportsters

1532 Raptor Bar (ea) $179.99

Shown with Iron Cross L.E.D. Light

(P/N 1534 - pg 198).

5-1/4” x 9-3/4”8-3/4”

8972

5-1/4” x 7”

8970


Use this mount to install the Iron Cross L.E.D. Light (P/N 1534 - pg 198) on

your backrest for added visibility. Simple installation - this mount clamps directly onto your

cathedral style backrest.

Fits: Cathedral style Küryakyn, H-D, or other square sissy bars that measure 1/2” thick by 4” inside to inside

1589 Mount for Iron Cross L.E.D. Light (ea) $31.99

Note: Not recommended for use with larger Küryakyn travel bags that secure with a wide strap around the backrest.

Support; we’ve heard of its importance from politicians to footwear adds, but here’s where it hits home for you. Whether keeping your passenger happy or providing a convenient place to secure luggage, Küryakyn is your best bet for good looking, sturdy, & comfortable backrests. Side plates are styled to blend in with their surroundings- right down to the chrome hardware. Uprights; tall, short, & stylized; & comfortable high-density pads endure weather extremes & miles of use. We provide extraordinary support for exceptional bikes!

8970 Fits: ‘97-’08 Road Kings (pr) Note: Will not accept Küryakyn Raptor Bar (P/N 1532).

$79.99

8971 Fits: ‘00-’10 FLST Models (except Fat Boy & Fat Boy Lo) (pr) $72.99

8972 Fits: ’00-’05 FXST Models (except Deuce) & ‘00-’06 Fat Boy (pr) $72.99

Note: These side plates are not compatible with Küryakyn Fold Down Luggage Rack (P/N 1558).

Fits: All Küryakyn Sissy Bar Side Plates, or others with 8-3/4” outside mounting dimension & .55” square stock mounting with 1-1/4” mounting hole spacing

1587 Short Sissy Bar 15” Tall (ea) $67.99

1588 Tall Sissy Bar 20” Tall (ea) $72.99

Note: These Sissy Bars are not compatible with Küryakyn Fold Down Luggage Rack (P/N 1558).

Fits: Küryakyn Sissy Bars (except Raptor), or other 1/2” square Sissy Bars with the same dimensions (4” inside to inside)

1601 Tall Backrest Pad (ea) $41.99

1602 Tall Backrest Pad with Button (ea) $41.99

1603 Short Backrest Pad (ea) $41.99

1604 Short Backrest Pad with Button (ea) $41.99

1606Front View Shown Folded

Rear View Shown Folded

Quick Release Side Plates

Patent Pending

Quick Release Attachment Kit Patent Pending

’09-’10 Electra Glide Standards, Road Glides, Street Glides, & Road Kings 1634 -$119.99 1635 -$69.99

’94-’08 Electra Glide Standards, Road Glides, Street Glides, & Road Kings 1636 -$119.99 1637 -$49.99


Quick Release Attachment Kit

All ’04-’10 Sportsters 1638 -$119.99 1639 -$39.99


Quick Release Attachment Kit

00-10 FLSTC Heritage Classic with Stock Saddlebags 1644 -$119.99 1642 -$69.99

00-'10 FLSTC Heritage Classic with H-D Hard Saddlebags (90224-00) 1640 -$119.99 1642 -$69.99

00-03 FLSTS Heritage Springer with Stock Saddlebags 1644 -$119.99 1642 -$69.99

05-'10 FLSTN Deluxe with or without H-D P&A Saddlebags or Hard Saddlebags (90725-00) 1640 -$119.99 1642 -$69.99

05-07 FLSTSC Springer Classic with or without H-D P&A Saddlebags (except Heritage Bags) 1640 -$119.99 1642 -$69.99

05-'07 FLSTSC Springer Classic with H-D Hard Saddlebags (90224-00 or 90225-00) 1640 -$119.99 1642 -$69.99

05-07 FLSTSC Springer Classic with Heritage Saddlebags 1644 -$119.99 1642 -$69.99

06 FLST Heritage with or without H-D P&A Saddlebags (except Heritage Bags) 1640 -$119.99 1642 -$69.99

06 FLST Heritage with H-D Hard Saddlebags (90224-00) 1640 -$119.99 1642 -$69.99

06 FLST Heritage with Heritage Saddlebags 1644 -$119.99 1642 -$69.99

00-'05 FXST, FXSTB, FXSTS, '00-'06 FLSTF with or without H-D P&A Saddlebags 1640 -$119.99 1642 -$69.99

00-'05 FXST, FXSTB, FXSTS with H-D Hard Saddlebags (90225-00) 1640 -$119.99 1642 -$69.99

00-'06 FLSTF with H-D Hard Saddlebags (90715-00) 1640 -$119.99 1642 -$69.99

06-'10 FXST, FXSTB, FXSTS, FXSTSSE, FXSTC with or without H-D P&A Saddlebags 1641 -$119.99 1642 -$69.99

06-'10 FXST, FXSTB, FXSTS with H-D Hard Saddlebags (90225-00) 1641 -$119.99 1642 -$69.99

07-'10 FLSTF, '08-'10 FLSTSB, '10 FLSTFB, '06 FLSTFSE without Saddlebags 1641 -$119.99 1642 -$69.99

07-'10 FLSTF, '10 FLSTFB with H-D Hard Saddlebags (90715-00) 1641 -$119.99 1642 -$69.99

1. Sportster Models equipped with H-D Hard Saddlebags (91412-0x) must purchase hardware kit 91405-04 from an authorized H-D dealer. 2. ‘07-’10 FXSTC requires seperate purchase of fender mounted seat.


TO

UR

IN

G

1606

1636

Patent Pending

Even the Moonshiners would be jealous of this backrest with hidden fold-down luggage rack. The sweeping oval bars with matching contoured pad flows with the lines of your bike. Literally fold down the inconspicuous luggage rack right out of the backrest when needed, & hide it away securely with the integrated thumb nut

when you don’t. Your passenger is happy, you can always bring your things, & your bike looks awesome. Mounts directly to the required Küryakyn Quick Detach Side

Straps (found below) & you’ll have everything you need. This is a must have.

Fits: Kürykayn Quick Release Side Plates Only - See chart below to select Side Plates & Attachment Kit

1606 Transformer Backrest (ea) $199.99

Note: Küryakyn Quick Release Side Plates are compatible with H-D Detachable Docking Kits if the bike is already so equipped.

53821-00, 53930-03, 53822-00, 53931-03, 53009-03, or 53075-03

Quickly & easily fastens to the Raptor Bar. L.E.D. design operates as an auxiliary running & brake light. This awesome light measures approximately 4-1/2” x 5” x 3/4” thick so it can easily find a home in almost any custom application.

1534 Iron Cross L.E.D. Light (ea) $95.99


Can be Used When License Plate is Relocated Under

Taillight on Road Glides, Road Kings & FLHT

Standards!

The Premier Luggage Rack is no run-of-the-mill flat rack for your motorcycle. This fresh new design is

streamlined & three-dimensional. Black rubber inserts contrast the bright chrome finish & also provide a slip

resistant surface. With front to back adjustment you can position this rack exactly where you want. Problem is, with a

rack this nice, you won’t want to cover it up with luggage!

Fits: All Küryakyn Side Straps & Sissy Bars (except P/N 1606) Softail: All ’84-’10 Models (except ’00-’07 FXSTD & ’06-’10 FXST, FXSTB & FXSTS & ’07-’10 FLSTF, FLSTFB, FLSTSB & FXSTC) with stock or accessory H-D rigid or detachable side plates Dyna: All ’91-’10 Models with sissy bar uprights mounted on H-D rigid or detachable side plates Sportster: All ’82-’10 Models with sissy bar uprights mounted on H-D rigid or detachable side plates Aftermarket backrests meeting following criteria: Sissy bar to side strap mounting bolts 1/4” – 20 with 1-3/16” to 1-5/16” center to center spacing Inside width between side straps must be 5-5/8” to 6” or 7-1/4” to 7-1/2” or outside width of side straps must be 5-3/8” to 5-5/8” or 7” to 7-1/4”

7156 Premier Luggage Rack (ea) $169.99

Note: Installation requires a pre-existing backrest with 1/4”-20 mounting bolts with backrest that bolts to side mounting plates for installation.

Patent Pending

Now you can have a convenient place to secure your luggage without cluttering up the clean lines of your bike. This sleek, contoured, die-cast rack is beautifully chrome-plated & incorporates raised rubber inserts to protect the surface & keep the load from shifting. The rack has approximately 70 square inches of usable area providing a stable platform for most bags.

Installation requires relocation of license plate when used on Road King, Road Glide, or FLHT Standard. This can be accomplished by adding our Curved Fender Tip License Plate Mount (P/N 3164), L.E.D. Lighted Curved License Plate Frame (P/N 9182), Bullet Light Rear Turn Signal Bar (P/N 2098), or the Custom Rear Turn Signal Bar (P/N 2099), sold separately.

Fits: ’06-’08 Street Glides, ’97-’08 Road Kings (except ‘07-’08 FLHRSE), ’98-’08 Road Glides, ’97-’08 FLHT Standard

7152 Luggage Rack for Street Glide, Road King, Road Glide & FLHT Standard (ea)

$189.99


TO

UR

IN

GWhen you need to strap on a travel bag, just pull down the Folding Luggage Rack. When you don’t, the rack hinges back up against the backrest, conveniently out of the way. Includes everything you need for installation.

1558 Fold Down Luggage Rack (ea) Fits: Softail: All ’84-’05 Softails (except Deuce) & ’06-’10 FLST Models (except ‘06 FLSTFSE, ’07-’10 FLSTF, ‘10 FLSTFB, ‘08-’10 FLSTSB) with stock or accessory “Low” (11”) sissy bar uprights mounted on H-D Rigid or Detachable Side Plates Dyna: ’06-’10 Dynas (except ’08-’10 FXDF, ’09-’10 FXDFSE) with stock or accessory “Low” (11”) sissy bar uprights mounted on H-D Rigid or Detachable Side Plates Sportster: ’04-’10 Sportsters with stock or accessory “Low” (11”) sissy bar uprights mounted on H-D Detachable Side Plates

$159.99

1529 Fold Down Luggage Rack (ea) Fits: Dyna: All ’02-’05 Dyna Models with stock or accessory “Low” (11”) sissy bar uprights mounted on H-D Rigid or Detachable Side Plates Sportster: All ’04-’10 Sportster Models with accessory “Low” (11”) sissy bar uprights mounted on H-D Rigid Side Plates

$159.99

Note: Not compatible with Küryakyn Sissy Bar Side Plates or Sissy Bar found on pg 196.

®

Whoever said you can’t take it with you obviously never got a good look at this new extra large luggage rack. Measuring 20”x12”, this deep cradle design handles sleeping bags, tents, jackets or rack bags with ease. Tie down points at each corner make securing your load a snap. Constructed of gleaming chrome tubular steel, it will be a welcome addition to any H-D Tour-Pak!

Fits: ’80-’10 Electra Glides, Tour Glides, & any other Touring Models that have been equipped with King or Ultra Tour-Paks

7139 Luggage Rack (ea) $129.99

Full-Dresser function with striking good looks. This hitch fits whether or not you have saddlebag rails or H-D or Küryakyn Filler Panels. Made of heavy-duty steel, it has a reinforced hitch plate & comes with all mounting hardware including a 1-7⁄8” ball.

Fits: All ’80-’08 Electra Glides, Tour Glides, Road Glides & Road Kings

9181 Trailer Hitch (ea) $199.99

Safely & properly apply the load from the trailer lighting to the battery & not to the rest of the bike’s electrical system with these Trailer Wiring Harnesses with Relays. Select the Universal or the Plug-&-Play kit that plugs inline underneath your seat to the bikes main rear harness. Both kits finish up by connecting directly to your battery & wiring to your trailer plug. Add the 5 to 4 Converter for trailers with 4-wire connectors & it plugs right inline to the Küryakyn Trailer Wiring Harness & Relay. This is the easiest wiring you will ever do!

7667 Universal Trailer Wiring Harness & Relay (ea) $69.99

7668 Plug & Play Trailer Wiring Harness & Relay (ea) Fits: ’97-’10 Electra Glides, ’98-’09 Road Glides (except ’09 FLTRSE), ’06-’09 Street Glides, ’97-’10 Road Kings, ’96-’10 Softails (except ’08-’10 FXCW/C, ’10 FLSTSE), ’97-’10 Dynas (except ’10 FXDWG)

$79.99

7669 Universal 5 to 4 Wire Trailer Hitch Converter (ea) $29.99

Note: Receptacle kits are not included because the style of receptacle used on trailers varies from manufacturer to manufacturer.

7668

7669

7667


Patent Pending

A rock solid trailer hitch can make the difference between smooth sailing & a white-knuckle ride. Our permanent mount hitch attaches at six points. Visible parts are bathed in lustrous chrome; hidden components are black powder coated for maximum rust protection. The kit includes all mounting hardware & a 1-7/8” ball.

Fits: All ’09-‘10 Electra Glides, Road Glides (except ’09 FLTRSE), Street Glides (except ’10 FLHXSE), & Road Kings

7652 Trailer Hitch for ‘09-’10 Touring (ea) $259.99

7659 5-Pin Receptacle Kit for Küryakyn Trailer Hitch (P/N 7652)

$48.99

This 5-pin receptacle features a chrome mounting bracket & fits our Hitch (P/N 9181).

9183 Trailer Hitch Receptacle with Bracket (ea)

$48.99

Bring along a fully loaded cooler or those extra items that just don’t seem to fit in your Tour-Pak. Simply install the mounting plate beneath your trailer hitch ball & this rack attaches or detaches in seconds.

Dim: 18” Wide x 12” Long x 1-1/2” Deep, Weight = 6.5lbs

Fits: Küryakyn Trailer Hitches (P/N 9181 & 7652) & Universal Applications*

7643 Trailer Hitch Rack (ea) $159.99

Note: This product is not intended to be used while pulling a trailer. Suggested weight limit is 35lbs. for appropriate handling & cornering.

*Universal mounting under hitch ball requires a flat/unrestricted area 5” wide x 2-1/2” long & ball stud able to accept a 1/4” thick spacer.

This shining chrome trailer hitch ball cover fits all 1-7⁄8” & 2” balls. Includes a foam lining to ensure a good fit.

7658 Trailer Hitch Ball Cover (ea)

$10.99

®

Bike-to-bike intercom communication up to 540 yards* Multiple Device Connection Technology (MDC) which allows

bikers to connect to four different devices including: -A Bluetooth enabled mobile phone for hands-free conversations -A GPS unit for in-helmet voice instructions -Another Scala Rider Q2 headset for bike-to-bike communication -Another Scala Rider headset (Solo, FM & Teamset) for communication up to 33ft

Voice dial, redial & call reject functions Includes an embedded FM radio with scan & seek features with

six station channel memory Talk time up to 8 hours - standby time up to 10 days

(AC wall charger included) AGC Technology - headset automatically adjusts its own volume

based on ambient noise Noise canceling microphone - fully weather protected Fits virtually all helmets - easy 5 minute self-installation Mulit set includes two pre-paired headsets in one package.

*Typical range is 270 yards. (Results may vary depending on terrain, traffic & line of sight).

932 Scala Rider Q2 (ea) $219.99

933 Scala Rider Q2 Multi set (ea) $395.99

Receive, initiate & reject calls by voice control Includes embedded FM radio with search & store functions Incoming phone calls automatically override music Talk up to 7 hours with a standby time up to 10 days AGC Technology automatically adjusts volume control Noise canceling & fully weather protected microphone fits virtually all helmets

930 Scala Rider Bluetooth FM (kit) $149.99

Rider to passenger intercom communication Receive, initiate & reject calls by voice control Talk up to 7 hours with a standby time up to 10 days AGC Technology automatically adjusts volume control Noise canceling & fully weather protected microphone fits virtually all helmets

931 Scala Rider Bluetooth TeamSet (kit) $229.99

Bag Not Included


TO

UR

IN

G

931

931

930

930

932

The Tune Trapper is a hidden FM antenna that works! Mount it anywhere (in almost any vehicle, boat, RV or motorcycle) in any position, in steel or fiberglass; it’s flexible, can be bent 10 to 20 degrees, & works awesome inside H-D fairings! The Tune Trapper is a full 1/2 wave helical dipole antenna, hand tuned to resonance with special instruments & requires no ground. It uses 95% braided shield cable for virtual elimination of EMI electrical noise caused by engines, fans, wipers, etc. These hand-tuned USA made antennas require no power; your radio has all the preamp it needs built in, it’s just looking for a properly tuned antenna to make it rock.

Fits: Electra Glides, Road Glides, Street Glides, & Trikes (overall length is 2’ with a 2’ cable)

853 Tune Trapper Hidden Antenna (ea) $39.99

Note: Does not pick up Weatherband.

Big performance- cut down to size! Enjoy all the range & clarity your AM, FM & CB radio offer without the mile-high stock antenna. This compact & flexible antenna is only 17” long & two versions are available depending on your bike model & mount. Each comes tuned for its specific mounting location so no calibration is needed. Your bike will look better, loads will strap on easier, & it won’t be in your way!

Fits: ‘89-’10 Electra Glides, Road Glides, Street Glides, Tour Glides, & Trikes equipped with AM/FM radio &/or CB radio kits

865 Tour-Pak Mount (ea) $29.99

866 Frame Mount (ea) $29.99

855

857

859

866


866

856

Shorty Antennas have long been known in the street rod market for their high-quality billet antennas & other accessories. The antennas look & work great for AM/FM reception on Electra Glides, Street Glides, & Road Glides. They thread right onto the stock antenna mounting stud for a quick & easy installation.

854 Black (ea) $23.99

856 Chrome (ea) $41.99

858 Polished with “Punisher” Skull (ea) $41.99

855 Black (ea) $23.99

857 Chrome (ea) $41.99

859 Polished with “Punisher” Skull (ea) $41.99

Show your American pride & add this American flag to the license plate of almost any motorcycle. The mount bracket & support plate bolt in behind the license plate quickly & easily. The angle of the 14” staff can be adjusted without tools. Includes a 4” x 6” American flag.

Universal application. Be sure motorcycle’s license plate mount is sturdy enough to support force applied by flag at speed.

4249 License Plate Mounted Flag (ea) $93.99

4264 Replacement American Flag (ea) $10.99

By Fine Art Transformations

Fly your flag without worrying it will fly off your bike. Machined from aluminum, the sturdy mount is easy to install. A single bolt tightens the two clamp halves around the chrome Saddle Bag Guard that comes standard on the FLHTC, FLHTCU & FLHTK. The flag mount is also compatible with Road King, Road Glide & FLHT Standard if H-D’s chrome Saddle Bag Guard kit is installed. All flags are 9”x 14”. Includes 12” & 18” Staff, American, P.O.W. & Crossbones Flags.

4208 Side Mount Flag Kit $103.99

4265 Replacement American Flag (ea) $10.99

4266 Replacement Crossbones Flag (ea) $10.99

4267 Replacement P.O.W. Flag (ea) $10.99

Secure this American flag to your bike’s antenna quickly & easily. Includes both American flag & a plain, customizable white flag to help you stand out at the next rally. (Flags measure 6” x 8”)

4217 Antenna Mount Flag (ea) $17.99

Fly your flag proudly. Highly stylized holder with adjustable angle clamps sturdily onto any 1/2” diameter tubing. Use the flagpole included in the kit for a blended, one-piece look, or insert your own pole – the tapered holder will secure a 1/4” to 3/8” flagpole. Comes with a 4” x 6” American flag.

4215 Flag, Pole & Holder (ea) $79.99

4264 Replacement American Flag (ea)

$10.99


TO

UR

IN

G

4254 4254

4255

Pride. Love of country. Respect. Whatever the reason you choose to display Old Glory or remember our P.O.W.’s, these flags deserve to be displayed with honor & in their best light. Mount straight, securely, & with dignity. 1/2” version fits most luggage racks or any 1/2”

tubing including front fender rails. 3/4” version fits saddlebag rails or any 3/4” tubing. American Flag is 6” x 11” & P.O.W. MIA Flag is 6” x 9”.

4254 1/2” Vertical Flag Mount (kit)

$69.99

4255 3/4” Vertical Flag Mount (kit)

$69.99

4262 Replacement American Flag (ea)

$10.99

4263 Replacement P.O.W. Flag (ea)

$10.99

LIBERATOR® BRAKE PEDAL PAD & STIRRUPS - PG 84

LIBERATOR® PEGS PG 84

EXTENDED LIBERATOR® BRAKE PEDAL - PG 114

LIBERATOR® SHIFT LEVER & PEG

PG 84 & 113


Chocks, Stands & Tie Downs

General Accessories

Bike Care

Patent Pending

Tired of breaking your back & your bike while trying to get the back tire in the right spot after you’ve secured the front tire in a chock? With the EZ Slide Bike Dolly you can get the rear of your bike into the perfect position with minimal effort! Simply roll the EZ Slide under the rear tire from the side, push down, & roll the bike into position. The EZ Slide works safely & easily on all bikes & is convenient to store.

939 EZ Slide Bike Dolly (ea) $99.99

4500lb Test nylon webbing 400lb Workload per strap Soft strap sewn in Industrial grade buckle Vinyl-coated hooks 6’ long, 1” wide straps

963 Standard Tie Downs with Soft Straps (pr)

$21.99

6.5’ long, 2” wide 7400lb Test nylon webbing 2600lb Rated assembly Double security stitching 2” Wide industrial grade ratchet Coated snap hook secure end &

S-hook at bar end

960 Deluxe Ratchet Tie Downs (pr)

$36.99

6.5’ long, 2” wide 7400lb Test nylon webbing 2600lb Rated assembly Double security stitching 2” Wide industrial grade ratchet 2 Snap hook secure ends

961 Deluxe Ratchet Tie Downs with Soft Sleeves (pr)

$51.99

4500lb Test nylon webbing Protects chrome & paint 18” long, 1” wide straps

966 Straps with Adjustable Soft Sleeves (pr)

$15.99

4500lb Test nylon webbing 400lb Workload per strap Heavy duty 1” ratchet 6’ long, 1” wide straps

967 Basic Tie Downs with Ratchet (pr)

$16.99

4500lb Test nylon webbing 400lb Workload per strap Heavy duty ratchet Vinyl-coated hooks 6’ long, 1” wide straps

965 Standard Tie Downs with Ratchet (pr)

$29.99

4500lb Test nylon webbing 400lb Workload per strap Industrial grade buckle Vinyl-coated hooks 6’ long, 1” wide straps

964 Standard Tie Downs (pr)

$20.99

2 Straps in 1! Pull top strap tight, ratchet lower strap to fully secure

6’ long, 1.5” wide 5000lb Test nylon webbing Double security stitching 1.5” Premium ratchet, 1800lb Test buckle Soft strap with neoprene soft sleeve

& vinyl-coated S-hooks

962 Premium Tie Downs with Neoprene Sleeves (pr)

$49.99


U.S. Patent D547,712 & 7,044,309

No Drilling - No Hardware - No Mounting!The challenge to all truck, trailer & toy hauler owners is to find a simple low cost solution to chocking motorcycles without the hassle of mounting hardware. With the EZ Chock, the hassle of drilling or mounting any hardware for wheel chocks is a thing of the past!

The EZ Chock design allows the use of the same chock in the truck, trailer or toy hauler without additional mounting hardware. A chock that goes where your bike goes… Not the other way around!

It’s patented plate & tab strapping design secures your bike in place without the traditional mounting hardware that all other chocks require. The EZ Chock comes in three sizes to cover practically every motorcycle!

935 3-1/2” for Dirt Bikes or Cruisers with Narrow Front Tires (ea) $49.99

936 5-1/2” for Sport Bikes (ea) $59.99

937 6-1/2” for Cruisers with Wide Front Tires (ea) $59.99

Note: We suggest P/N 935 for motorcycles with 80/90, 90/90, or MH/90 front tires; P/N 936 for motorcycles with 110/90, 120/90, or 130/90 front tires; & P/N 937 for motorcycles with 140 or wider front tires.

Tired of searching for good places to attach tie-down straps to your Harley? Well Küryakyn has the solution with the Custom Tie-Down Brackets. Now instead of wearing out handlebar riser bushings & scratching inner fairings, your motorcycle can be tied down with ease. These stylish, custom brackets bolt to the sides of the front fork & provide a secure, easily accessible point to attach tie-down straps to the front of the motorcycle.

Fits: ‘83-’10 Ultra Classic Electra Glides, Electra Glide Classics, Electra Glide Standards, Road Kings, Road King Classics, & Road King Customs (Compatible with Road King detachable

windshields)

928 Teardrop Custom Tie-Down Brackets (pr) $49.99

929 Silhouette Custom Tie-Down Brackets (pr) $51.99

Fits: ’86-’90, ‘06 FLST Heritage, ’89-’10 FLSTC Heritage Classic, ’90-’10 FLSTF Fat Boy, ’10 FLSTFB Fat Boy Lo, ’93-’94 FLSTN Heritage Nostalgia, ’95-’96 FLSTN Heritage Special, & ’05-’10 FLSTN Deluxe

926 Teardrop Custom Tie-Down Brackets (pr) $49.99

928

929

926


TH

E

SH

OP

Or… simply place EZ Chock against the front of the truck bed & strap in the bike. The non-slip rubber pad on the bottom plate

ensures the chock stays put!

Easy as 1 - 2 - 3...

1. Set in Place

2. Set Rear Straps

3. Strap in the Bike

®

Condor motorcycle support & transportation solutions provide a fully adjustable wheel locking system capable of accommodating almost any motorcycle. The patented locking mechanism effortlessly & securely supports the motorcycle in an upright position. This makes tying down a motorcycle a simple & easy task for one person. We are so impressed with Condor Products, we use them in our company trailers for safe & secure transport of our motorcycles.

®

Accommodates front or rear wheel sizes from 14”-22”/80mm-220mm wide Accommodates bikes weighing up to 3000 lbs Intended to be used as a trailer chock only Includes Trailer Mounting Adapter Kit - Unit quickly & easily attaches or detaches to any transportation platform (trailer, pick-up bed, etc.)

Allows you to secure the bike with only two straps Folds down for easy storage & weighs only 26 lbs Upright size: 9” Wide, 25” Long, & 15” High Folded size: 9” Wide, 25” Long, & 7” High

922 Condor SC2000 Trailer Only Wheel Chock with Adapter Kit (ea)

$184.99

923 Adapter Kit for SC2000 (ea) $24.99

®

Accommodates front or rear wheel sizes from 15”-22”/80mm-220mm wide Accommodates bikes weighing up to 2400 lbs Can be used as a work stand or trailer chock Allows you to secure the bike with only two straps With a trailer adapter kit (sold separately) the unit quickly & easily attaches to trailers or pick-up beds

Folds down for easy storage & weighs only 21 lbs Upright size: 29” Wide, 30” Long, & 15” High Folded size: 29” Wide, 30” Long, & 6” High

920 Condor Pit-Stop/Trailer Stop Wheel Chock (ea) $249.99

921 Adapter Kit for Condor Pit-Stop (ea) $21.99

920

Chrome-plated O.E.M. style kickstand components for Late Model Big Twins.

7110 Chrome Kickstand Spring (ea) Fits: ’85-’06 Softails, all ’91-’06 Dressers & Road Kings, ’91-’94 FXR, & all ’91-’06 Sportsters

$5.99

7112 Kickstand (ea) Fits: All ’89-’06 Softail Models

$39.99

7113 Kickstand (ea) Fits: All ’83-’06 Dressers & Road Kings Note: Requires motorcycle to be equipped with Kickstand Bumper.

$46.99

71127110

922

921


Blast water off your bike or anything wet with this high-speed, 8 H.P. (two 4 H.P. motors) dryer of sturdy, all-steel construction. Features 2 stage dual fan with two speeds & two temperatures. Includes 10’ by 1.5” hose & a variety of interchangeable tips. Weighs 16 lbs.

903 Master Blaster (ea) $429.99

The Air Force Blaster with its 4 peak H.P. motor & 2-stage dual fan provides a super high velocity, mildly heated air column that cuts drying time by approximately 75%. A variety of interchangeable tips included.

900 Air Force Blaster (ea) $239.99

The Sidekick is a compact, powerful hand held motorcycle dryer that is small enough to put into a saddlebag yet strong enough to dry a bike off in minutes! At just over 3 pounds, the all steel Sidekick’s 1.3 H.P. motor produces a large volume of warm filtered air & is great at home or on the road.

905 Blaster Sidekick (ea) $99.99


TH

E

SH

OP

Shown with P-Clamp - pg 49

WARNING!Deer are responsible for

more death & injury than any other

animal in the U.S.A.

®

Deer are the number one animal causing human deaths in this country! The Hornet has proven to be the only device to effectively deter deer accidents. There are tens of thousands of Hornets in daily use with millions of proven miles. Regardless of speed, it produces a sound pressure of 120 db, & under most circumstances is very resistant to contamination. Regular inspection & cleaning is recommended.

Proper placement is essential for maximum performance. Detailed instructions make for easy & effective installation.

The Hornet includes various universal mounting brackets, basic hardware & a switch. A separate motorcycle wiring kit is available & includes a harness & switch specifically designed for use on a motorcycle; while not required, it will make the installation much neater. Our P-Clamps work great on many motorcycles to assist in mounting to frames or engine guards.

Universal fit on 12-volt motorcycles

4042 V-120 Hornet Deer Alert, Black (ea) $79.99

4043 V-120C Hornet Deer Alert, Chrome (ea) $84.99

4044 Motorcycle Wiring Kit for V-120/V-120C $17.99

®

Keep cold drinks cold & hot ones hot when you’re on the road. Stainless Steel inside & out with a closable lid to avoid spills.

1469 Küryakyn Stainless Steel Travel Mug (ea)

$17.99

®

You buy the parts to customize & personalize your motorcycle, now get the shirt to show people where you get your top quality parts.

805 L-Short Sleeve, Sand (ea) $20.99

806 XL-Short Sleeve, Sand (ea) $20.99

807 XXL-Short Sleeve, Sand (ea) $22.99

809 L-Long Sleeve, Black (ea) $23.99

810 XL-Long Sleeve, Black (ea) $23.99

811 XXL-Long Sleeve, Black (ea) $25.99

Add this license plate helmet lock & conveniently lock your helmet to your motorcycle. The simple little mounting plate easily bolts to the back of almost any motorcycle & allows the easiest access for locking your helmet.

4248 License Plate Helmet Lock (ea) $39.99

8114 Fits: 1/4” Allen Bolts (10 pk) $7.99









This Disc Lock Alert stores inside the disc lock when not in use. When removed from the lock a super bright blinking L.E.D. is activated. Magnetic strips on the insert permit temporary mounting on your tank, speedo bezel, or any magnetic metal surface.

The bright flashing L.E.D. along with the large “ARMED” warning on it will trick the would-be thief into thinking you have an alarm as well as remind you that your lock is still in place.

4229 Disc Lock & Alert Combo (ea) $36.99

Here is one tough, compact lock. Easy to use, easy to carry, & at a

realistic price. Universal front or rear fitment. (Does not fit rear rotor on

’99-earlier FLT Models.) 3/8” dia. pin.

4223 Disc Lock, Black (ea) $31.99

4257 Disc Lock, Yellow (ea) $31.99

Never ride off with your disc lock in place again. These compact, yellow cords are easy to stretch from the disc lock to the handlebar to serve as a reminder to remove the lock.

4234 4-1/2 ft. Lock Reminder Cord (ea) $8.99

4236 9 ft. Lock Reminder Cord (ea) $10.99

The finishing touch to any set of wheels. Fits steel stems up to 5/8” (including locknut).

9145 Short (pr) $12.99

9135 Long, Black (pr) $11.99

9136 Short, Red (pr) $11.99

9139 Short, Blue (pr) $11.99

Help keep your bike yours with this added security measure. This high-quality rotor lock is bright yellow for high visibility & is small enough to fit in your jacket pocket.

Fits: Most drilled front or rear rotors 3/16” dia. pin

4256 Mini Disc Lock, Yellow (ea) $31.99

These slick little units cover the knurling on

the heads of the 1/4” Allen bolts found all over

your Evolution or Twin Cam engine. Just slip these babies on & top them off with our Hot Spots & you’ll be lookin’ good.

8781 Hot Sleeves (10 pk) $7.99


Don’t let anyone walk off with your helmet! Lock it right to your bike with our Chrome Universal Helmet Lock. Works on engine guards, frame tubes, or any other 7/8” to 1-1/2” tubes.

4232 Chrome Universal Helmet Lock for 1-1/4” to 1-1/2” Tube (ea)

$24.99

4220 Chrome Universal Helmet Lock for 7/8” to 1-1/4” Tube (ea)

$24.99

Note: Installs with standard tools. Works best mounted on a 2-1/4” long section of straight tube.

This compact fold up set has all the tools you need for keeping your motorcycle tight! Features a strong handle & the 7 tools for the most used fasteners on your H-D.

6024 Hawg Buddy 7-in-1 Fold Up Set (ea)

$21.99

60236016

Standard & Torx hex tools should be part of every rider’s basic tool kit.

6016 13pc Black Ball End, .050”-3/8” (set)

$18.99

6018 5pc Fold-Up 3/16-3/8 Hex (set) $9.99

6019 9pc Fold-Up, .050-3/16 Hex (set) $5.99

6023 8pc Fold-Up, T9-T40 Torx (set) $14.99

Reads from 2.5 lbs to 100 lbs in .5 increments.

6012 Digital Tire Gauge with Hose (ea) $22.99

Reduces the manual effort required to pull the

lever by 40%. It reduces rider

fatigue & offers smoother, easier clutch action. Fits

inside the transmission’s

side cover.

Fits: All ‘87-’99 Evo Big Twin (except FXR), all ‘99-’06 Twin Cam (except ‘06 Dyna), all ’86-’90 XL

395 Burly Branch Lite Clutch Kit (ea) $29.99

The Missing Link is designed to eliminate uncomfortable & dangerous riding conditions known as tank slap, rear steer or high speed wob-ble on rubber mounted Touring Models. It works just like the top & front stabilizer links to keep the engine centered in the frame by preventing the rear rubber mounts from compressing & moving.

All steel construction & powder-coated finish for years of worry-free use

Mounts out of the way above the transmission

Instructions provide an easy, do-it-yourself installation in 30 minutes or less

Fits: All ’02-’08 Electra Glides, Road Kings, Road Glides & Street Glides

396 The Missing Link Engine Stabilizer (ea)

$399.99

Six step, fully automatic switch mode model for all types

of lead-acid batteries (wet, sealed, AGM)

Maintenance pulse charging increases battery life

Charges even drained batteries – Pulse recover of sulfated batteries

Four options – 14.4V, 14.7V, 15.7V recondition, or 13.6V that can also be used as a power supply to operate equipment requiring 13.6V & a maximum of 7A

4258 CTEK MULTI US 7002 (ea) $139.99

Easily charges all small batteries & is an excellent maintenance charger for seasonal vehicles with batteries up to 100 Ah

Begins charging at 0.8A

Sends out current pulses for charge maintenance, will not over-charge

Ideal uses: Motorcycles, ATVs, personal watercraft, snowmobiles

4202 CTEK US 800 (ea) $49.99

Strong multi-tasker that can handle all but the

largest vehicles

Three changing modes [email protected], [email protected], &

[email protected]

Unique cold temperature mode enables faster re-charging, even in the coldest winter conditions

Charges all types of lead-acid batteries (wet, sealed, AGM)

Specifically recommended for Optima Red Top batteries

Ideal uses: All CTEK US 800 applications plus boats, campers, & trucks

4203 CTEK MULTI US 3300 (ea) $74.99

4204 Fits: White or White & Black Quick Connector (ea)

$5.99

4238 Fits: Orange & Black Quick Connector (ea)

$5.99

4202


TH

E

SH

OP

4203

4258

4204

4238

Fits virtually all lead-acid battery types: Wet, Sealed, Gel & AGM

Splashproof & weatherproof – Sealed design is approved for outdoor use

Compact, lightweight, & easily portable

Patented technology protects against sparks, short circuits & reverse polarity

Does not damage sensitive electronics

Recovers or “wakes” a sulfated or under- charged battery

Each charger includes one Quick Connect Cord Set

Oxidization & discoloration is easily & quickly removed from aluminum, stainless, chrome, & brass while returning the surface to a brilliant shine. Also effective on minor gold & blue discoloration on chrome & stainless exhaust pipes. Besides containing an ultra fine polishing rouge, White Diamond contains a wax agent that will keep surfaces gleaming far longer than competing brands.

35 White Diamond Metals Polish, 12 oz (ea) $15.99

Glare Ultra Wash is biodegradable & safe for paints & finishes including enamel & clear-coated paints.

943 Glare Ultra Wash (ea)

$14.99

®

Protects metal parts in high heat environments up to 1600ºF

Prevents rust, corrosion, seizing & eases disassembly

Reduces friction & wear

97 Silver Grade Anti-Seize Stick (20 grams) (ea)

$5.99

Eliminates loosening from vibration, shock, or thermal expansion & prevents rust & corrosion while sealing & protecting threads

Requires localized heat & hand tools for removal

Temp resistant to 300ºF, fully cured in 24 hrs

96 268 High Strength Red Threadlocker Stick (9 grams) (ea)

$12.99

Eliminates loosening from vibration, shock, or thermal expansion & prevents rust & corrosion while sealing & protecting threads

Removable with hand tools

Temp resistant to 300ºF, fully cured in 24 hrs

95 248 Medium Strength Blue Threadlocker Stick (9 grams) (ea)

$12.99

This amazing wire loom adds a measure of protection & good looks to your wiring. Though tubular in shape, it’s actually a flat piece of material with a memory. A wire can actually be added or joined to an existing harness with no cutting or fishing necessary. Sold in 6 foot lengths.

1987 1/4” Wire Wrap-Black (ea) $9.99



LHP (Liquid Horsepower) is the most advanced & effective gasoline additive for use in both stock & high performance engines. The performance, protection, & fuel mileage it delivers will keep you coming back for more.

Mild detergents clean the leather, lanolin oil conditions & restores the skin, then the black dye pigment restores the color! Natural waxes seal the color in & waterproofs your

leather saddle bags, jackets, & motorcycle seats. Try it on anything black; running boards, car interiors, plastic, & rubber side walls - you’ll be impressed how well it works. Contains no silicone & will not bleed. Available in single use packs, 4 oz detail kit with sponge applicator & buffing cloth, & 8.8 oz bottle with applicator sponge.

950 Doc Bailey’s Leather Black 8.8 oz Bottle w/Applicator Sponge (ea)

$24.99

957 Doc Bailey’s Leather Black Detail Kit (4 oz Kit)

$16.99

951 Doc Bailey’s Leather Black (50 Count Single Use Packs)

$49.99

956

954

Brand new clear formula designed for all color, exotic skins, & multi color leathers. Cutting edge

technology - light years ahead of traditional leather care. Spray & Wipe Clear Formula

cleans, conditions, restores & waterproofs all leather & vinyl. Excellent for riding leathers, motorcycle seats with stitching, leather furniture, car interiors – all colors of

leather, vinyl, rubber & plastic! Available in single use packs & 4 oz detail kit with sponge

applicator & buffing cloth.

958 Doc Bailey’s Leather Clear Detail Kit (4oz Kit)

$16.99

959 Doc Bailey’s Leather Clear (40 Count Single Use Packs)

$39.99

Maximum street legal octane booster potency approved by EPA

O2 sensor safe

Upper cylinder lubricant protects & extends life of valves, valve guides, pistons, rings, & cylinders

Prevents rust & corrosion

Stabilizes fuel to prevent gelling during storage

Complies with all manufacturer warranty requirements

954 LHP 1oz Bottles (48 Count with 2 Displays)

$143.99

955 LHP 1oz Bottle (Treats 5 gal) (ea)

$2.99

956 LHP 6oz Bottle (Treats 30 gal) (ea)

$10.99


957

951

950

958

Air Cleaners

Wild Things

Exhaust Systems

Performance Kits

With a race inspired design & show bike styling this air cleaner will give your bike a

look like no other can!



PE

RF

OR

MA

NC

E

U.S. Patent 5,307,771

Capable of supporting engine builds that produce up to 140+ H.P.Since its inception, the Hypercharger has continued to evolve to meet the needs of the performance minded rider. Mike Roland’s testing & development of our Wild Things Performance® Products provided an incredible wealth of information about airflow into & out of an engine. Mike worked closely with our talented design staff & what you see here is without a doubt the best flowing Hypercharger we have ever produced.

The interior shapes, especially the critical radius leading into the carb or throttle body, have been carefully designed. The outer cover incorporates an additional scoop to direct air into a high-flow, washable foam filter element that seats snuggly in the end of a round K&N filter element. This filter assembly is one of the best flowing on the market & is capable of supplying enough air to even the highest output street motors. The frontal opening is huge & as with all Hyperchargers, the vacuum operated butterflies allow almost unrestricted airflow to the filter under high-load riding situations.

Pro-R Hyperchargers come complete with mounting hardware & crankcase breather kits.

9320 ’91-’06 XL Models with CV Carb $299.99

9321 ’93-’99 Evolution Big Twins with CV Carb $299.99

9323 ’01-’05 Twin Cam with Dephi Fuel Injection $322.99

9322 ’99-’06 Twin Cam with CV Carb & ’06-’10 Twin Cam with Delphi Fuel Injection (except ’08-’10 Touring & Trikes)

$322.99

9325 ’08-’10 Touring Models & Trikes $322.99

9324 Pro-R Air Cleaner Assembly Only This is a complete air cleaner assembly (CV bolt pattern) that can be used with adapters, brackets, or mounting kits to cover applications for which we do not offer a complete kit.

$279.99

Note: Applications called out for CV carb will bolt directly to stock 40mm or Screamin’ Eagle 44mm CV carbs. These kits can easily be adapted to work on Mikuni HSR42/45/48, S&S Shortys, or other aftermarket carbs. See pg 221 for complete adapter listings.

Note: Leg room is diminished compared to stock air cleaner, particularly on ‘08-’10 Touring Models & Trikes.

9493 Replacement K&N Filter for Pro-Series & Pro-R (ea)

$59.99

8554 Vacuum Pod Rebuild Kit for Pro-Series or Pro-R Hypercharger (ea)

$13.99

9319 Replacement Cage/Foam Filter Assembly (ea)

$16.99

9330 Chrome Butterflies for Pro-R/Pro-Series Hyperchargers (pr)

$14.99

9331 Black Butterflies for Pro-R/Pro-Series Hyperchargers (pr)

$14.99

9332 Pro-Series Butterfly Shaft Caps with Screws, Washers, Bearings, & Spring (set)

$16.99

9333 Pro-R Butterfly Shaft Caps with Screws, Washers, Bearings, & Spring (set)

$16.99

9334 Case Screws for Pro-Series & Pro-R (set/3)

$6.99

So… you’ve decided to upgrade the stock air cleaner on your ’08-’10 Touring rig. You’re removing the last of the stock air cleaner assembly when there it is… that big honkin’ ugly throttle servo motor! Well don’t worry, we’ve got you covered. We offer a great looking remedy for this problem whether you’ll be using a Screamin’ Eagle Stage One or any Küryakyn Air Cleaner.


8657 For use with Screamin’ Eagle Stage One Air Cleaner (ea) $79.99

8659 For use with all Küryakyn Air Cleaners (ea) $79.99

This part is a must-have when replacing the stock air cleaner with any Küryakyn Air Cleaner on ‘08-’10 Touring rigs. This easily installed cover is

designed to complement our Servo Motor Cover (P/N 8659). While it is not required for installation, it does remove the ugly from the stock

support bracket!

Fits: ’08-’10 Electra Glides, Road Glides, Street Glides, Road Kings & Trikes with Küryakyn Air Cleaners

8658 Throttle Body Support Bracket Cover (ea) $41.99

8659

8658

8659

8658


We tested many of our competitor’s forward facing air cleaners & found them to be very restrictive. We designed many models until we settled on this very aggressive, free flowing, truly high-performance unit. The chrome-plated die-cast housing with high-flow filter element supplied by Advanced Flow Engineering (aFe) is easy to install & air-flow will support

performance engines in excess of 100 H.P.


9861 ’93-’99 Evolution Big Twins with CV Carb & ’99-’10 Twin Cams with CV Carb or Delphi Fuel Injection (except ’08-’10 Touring & Trikes)*

$299.99

9864 ’08-’10 Touring Models & ‘10 Street Glide Trike*

$299.99

9862 Complete Corsair Air Cleaner Assembly Only This is a complete air cleaner assembly (CV bolt pattern) that can be used with adapters, brackets, or mounting kits to cover applications for which we do not offer a complete kit.

$289.99

* Not compatible with fairing lowers equipped with glove boxes.

9858 Replacement Filter Element for Corsair (ea) $69.99

9857 Replacement End Cap Kit (kit) $29.99

9859 Pre-Filter for Corsair (ea) $31.99

88 Filter Oil & Cleaning Kit $16.99

Note: Installation of this air cleaner may decrease rider leg room. Please reference dimensions provided & determine if installation will adversely affect safe

& comfortable operation of the motorcycle before making your purchase. This is especially important for riders with shorter legs.

12!1/2”

6!1/2”

Not for the faint of heart, our Skull Air Cleaner Kits are a vile & sinister addition to any bad-ass ride. The outer cover is the same high-strength, extremely rigid composite cover we sell for S&S carbs. These kits also include a backing plate & high-flow K&N filter element as well as any necessary brackets, crankcase breathers or hardware required for a quick & easy installation. The Skull Air Cleaner’s air-flow will support performance engines in excess of 130 H.P.


9944 ’99-’10 Twin Cams with CV Carb or Delphi Fuel Injection (except ‘08-’10 Touring & Trikes)

$239.99


9945 Complete Skull Air Cleaner Assembly Only This is a complete air cleaner assembly (CV bolt pattern) that can be used with adapters, brackets, or mounting kits to cover applications for which we do not offer a complete kit.

$199.99

9947 Painted Black Chrome Skull Air Cleaner Kit Fits: ‘99-’10 Twin Cams w/CV Carb or Delphi Fuel Injection (except ‘08-’10 Touring & Trikes)

$263.99

9948 Painted Black Chrome Skull Air Cleaner Kit Fits: ‘08-’10 Touring Models & Trikes

$263.99

9469 Replacement Filter Element (ea) $72.99

Note: Applications called out for CV carb will bolt directly to stock 40mm or Screamin’ Eagle 44mm CV carbs. These kits can easily be adapted to work on Mikuni HSR42/45/48, S&S Shortys, or other aftermarket carbs. See pg 221 for complete adapter listings.

Patent Pending

Impress with it’s beauty & stun with it’s performance! The new & improved Hi-Five Mach 2 is the best performing, best looking, & best fitting air cleaner on the market today. Not only can the Hi-Five Mach 2 support well over 140hp, it’s look can be customized & individualized to meet the needs of the most demanding riders with everything from themed medallions to mesh inserts & everything in between. Lead the pack & look good doing it!

9458

9451

9451 Complete Hi-Five Mach 2 Air Cleaner Assembly Only Patent Pending

$239.99

9453 ‘91-‘06 XL Models with CV Carb $269.99

9454 ’93-’99 EVO Big Twins with CV Carb $269.99

9455 ’99-'10 Twin Cam with CV Carb or Delphi (except ’08-'10 Touring & Trikes)

$269.99

9456 ’08-'10 Touring Models & Trikes $259.99

Looking for a little variety? Transform your Standard Hi-Five Mach 2 or Zombie Hi-Five Mach 2 in a matter of minutes. Choose the medallion

that suits your mood, remove the center piece on the Mach 2 & apply the medallion. Instantly, you have a whole new look without the expense of

buying a new air cleaner.

37963764 379837973795

9458 ’99-'10 Twin Cam with CV Carb or Delphi (except ’08-'10 Touring Models & Trikes)

$279.99

9459 ’08-'10 Touring Models & Trikes

$269.99

3764 Deco Medallion (ea) Patent Pending $17.99

3795 Flame Medallion (ea) Patent Pending $17.99

3796 Widow Medallion (ea) Patent Pending $17.99

3797 Zombie Medallion (ea) Patent Pending $17.99

3798 Chauvinist Medallion (ea) $17.99

3799 Patriot Medallion (ea) Patent Pending $17.99

3799


PE

RF

OR

MA

NC

E

8511

This kit contains the necessary adapter & hardware to mount a Twin Velocity or Twin Velocity Plus Air Cleaner to Evolution Big Twin or Twin Cam engines using S&S E or G carbs.

8511 S&S Adapter for Evolution Big Twin $51.99

9792 S&S Adapter for Twin Cam $51.99

Note: You must also order P/N 8519 sold separately.

Available for anyone currently using a new style (replaceable bearing cup style) Standard Hypercharger. The kit consists of the new “Pro” large volume outer case half with bearing cups, butterflies, larger K&N air filter element, & necessary hardware.

9310 Pro Series Hypercharger Upgrade (Available in Chrome Only)

$139.99

9300 ’91-’06 XL with CV Carb $289.99

9301 ’93-’99 Evolution Big Twin with CV Carb $289.99

9308 ‘95-’98 Evolution Big Twin with EFI* $299.99

9307 ‘99-’01 Twin Cam Dresser & Road King with EFI* $299.99

9311 ’01-’05 Twin Cam with Delphi EFI $299.99

9302 ’99-’06 Twin Cam with CV Carb, ’06-’10 Twin Cam with Delphi EFI (except ’08-’10 Touring & Trikes)

$289.99


9306 Pro Series Hypercharger Only (late inlet) This air cleaner can be used with adapters, brackets, or mounting kits to cover applications for which we do not offer a complete kit.

$249.99

*Requires drilling a hole in manifold to supply a vacuum source.

U.S. Patent 5,307,771

Capable of supporting engine builds that produce up to 120 H.P.The body is 1/2” wider than a standard Hypercharger. “Pro” embossed bearing cups give this performance weapon a look that screams horsepower!

The Pro-Series Hypercharger fits Stock or 44mm CV style carbs, & can be easily adapted to Mikuni HSR42/45/48 & S&S Shortys. (See page 221 for adapters for other carb applications.)

Pro-Series Hyperchargers come complete with mounting hardware & crankcase breather kits. See pg 215 for Replacement Components.


9831 ’93-’99 Evo Big Twin with Stock Carb (ea)

$229.99

9832 ’99-’10 Twin Cam with Stock Carb or Delphi Fuel Injection (except ’08-’10 Touring & Trikes) (ea)

$229.99

8492 Replacement Cage/Foam Filter Assembly (ea)

$16.99

9790 Replacement K&N Filter Element (ea)

$59.99

Customize your Twin Velocity Plus with these powder coated inner plates.

9835 Candy Red Inner Plate (ea) $39.99

9836 Black Inner Plate (ea) $39.99

9837 Candy Blue Inner Plate (ea) $39.99

Additional slots on both sides & enlarged openings at the bottom to allow more air

to enter the sides of the K&N filter. End Breather Technology - We added a large, round foam filter element beneath the teardrop center cover to allow filtered air to enter the end of the filter.

The Twin Velocity’s internal crankcase vent system has been designed to direct gasses & oil droplets into the carburetor or induction module.

All these improvements add up to improved air flow & greatly improved

power potential.

9303 ’91-’06 XL with CV Carb $289.99

9304 ’93-’99 Evolution Big Twin with CV Carb $289.99

9312 ’01-’05 Twin Cam with Delphi EFI $299.99

9305 ’99-’06 Twin Cam with CV Carb, ’06-’10 Twin Cam with Delphi EFI (except ’08-’10 Touring & Trikes)

$289.99


Note: Leg room is diminished compared to stock air cleaner, particularly on ’08-’10 Touring Models & Trikes.

’93-’99 Evo Big Twin with Stock Carb, Includes Küryakyn Crankcase Breather

9991 Chrome Body with Chrome Blood Groove Trap Door & Black Butterflies

$269.99

9988 Black Body with Black Blood Groove Trap Door (lettered) & Black Butterflies

$289.99

9990 Chrome Body with Chrome Blood Groove Trap Door & Chrome Butterflies

$269.99

’93-’99 Evo Big Twin with Stock Carb, for use with Screamin’ Eagle Crankcase Breather


$239.99

’93-’99 Evo Big Twin with S&S E or G, Includes Küryakyn Crankcase Breather


$299.99

‘95-’98 Evo Big Twin with EFI*, Includes Küryakyn Crankcase Breather


$289.99

*Requires drilling a hole in manifold for vacuum supply.

‘91-’06 Sportster Models with Stock Carb, Includes Küryakyn Crankcase Breather


$269.99


$289.99


$269.99

‘91-’06 Sportster Models with Stock Carb & Screamin’ Eagle or other Crankcase Breather Kits


$239.99

’99-’01 Twin Cam Road King or Dresser with EFI*, Includes Küryakyn Crankcase Breather


$289.99

*Requires drilling a hole in the manifold to supply a vacuum source. ’01-’05 Twin Cam with Delphi EFI, Includes Küryakyn Crankcase Breather


$289.99


$309.99


$289.99

’99-’06 Twin Cam with Stock Carb & ’06-’10 Twin Cam with Delphi EFI (except ’08-’10 Touring & Trikes), Includes Küryakyn Crankcase Breather


$269.99


$289.99


$259.99

’08-’10 Touring Models & Trikes, Includes Küryakyn Crankcase Breather


$269.99

9971 Black Body with Black Blood Groove Trap Door & Black Butterflies

$289.99


$259.99

with Blood Groove Trap Door to be used with adapters, brackets, or mounting kits to cover applications for which we do not offer a complete kit (late inlet).


$219.99

Wrinkle Black Body with Wrinkle Black Blood Groove Trap Door & Chrome Butterflies.

9981 Fits: ’93-’99 Evolution Big Twin with Stock Carb, includes Küryakyn Crankcase Breather

$279.99

9979 Fits: ’01-’05 Twin Cam with Delphi EFI, includes Küryakyn Crankcase Breather

$299.99

9980 Fits: ’99-’06 Twin Cam with Stock Carb, & ‘06-‘10 Twin Cam with Delphi EFI (except ’08-’10 Touring & Trikes), includes Küryakyn Crankcase Breather

$289.99

9973 Fits: ’08-’10 Touring Models & Trikes $289.99


PE

RF

OR

MA

NC

E

Küryakyn offers a select number of complete Hypercharger Kits assembled with a Blood Groove Trap Door. The Blood Groove Trap Doors offer a styling alternative to standard trap doors; you get the same impressive performance no matter which

style you choose. Complete kits are listed for most popular applications. U.S. Patent 5,307,771

Normally, replacing a stock air cleaner with a Hypercharger will net you a 7-9 horsepower increase

at the rear wheel, with no other modifications! (See graph above) Add a carb recalibration kit, a good

performance exhaust system (not drag pipes) & a 12-14 horsepower increase is normal.

Create a new look in minutes. Choose from our wide variety of plated or powder-coated colors to give your Hypercharger the exact look you’ve been searching for.

All Colored Trap Doors $18.99

All Colored Butterflies (pr) $14.99

Color Trap Doors Butterflies

Chrome 8482* 848824K Gold N/A 8489*Black 8478 8484Candy Red 8479 8485Candy Blue 8480 8486Nugget Yellow 8420 N/AMystique Green 8424 N/AMetallic Gray 8426 8427Violet Pearl 8428 N/AVictory Red 8430 N/ALazer Red 8432 N/ASinister Blue 8434 N/ARaw 8477* 8490*

*Special pricing shown below.

8482 Chrome Trap Door $20.99

8477 Raw Trap Door $16.99

8488 Chrome Butterflies (pr) $14.99

8489 Gold Butterflies (pr) $19.99

8490 Raw Butterflies (pr) $12.99

Note: Trap Doors & Butterflies are not for use on Pro-Series Hyperchargers.

U.S. Patent 5,307,771 Outstanding performance on stock or mildly modified engines up to 90 H.P. With the addition of the Stinger Trap Door (P/N 8498 - pg 222), we have tested & proven the Hypercharger to support engines up to at least 130 H.P.

Stock or touring applications where added performance is desired, but not paramount. Comfort

& driver leg-room is a major factor.

Custom applications where matching or contrasting color trap door & butterflies are used as a styling accent.

Candy Red Black Candy

BlueAll

Chrome S&S E&G Mikuni HSR42/45/48

Pre-Evo Big Twin & XL using high perf carbs like S&S/E or G, Mikuni, Screamin’ Eagle, Rev Tech (late inlet)

8448 8446 8525 & 8519

8553

’84-’91 Evo Big Twin using high perf carbs like S&S/E or G, Mikuni, Screamin’ Eagle, Rev Tech (late inlet)

8500 8501 8502 8504 8525 & 8519

8553

’92 Big Twin using high perf carbslike S&S/E or G, Mikuni, Screamin’ Eagle, Rev Tech (late inlet)

8505 8506 8525 & 8519

8553

’99-’06 Twin Cam using S&S, E or G (late inlet) 8448 8446 9793

’99-’06 Twin Cam using Mikuni HSR 42/45/48 (late inlet) 9750 9751 9752 9754 8553

’86-’90 XL using high perf carbs (late inlet) 8356 8359 8553

Candy Red Black Candy Blue All Chrome Price

Pre-Evo Big Twin with stock carb4 or S&S B Series5 (early inlet)

8453 $199.99

’86-’87 XL with stock carb or S&S B Series5 (early inlet) 8350 $228.99

’88-’90 XL with stock carb (late inlet) 8356 8359 $228.99

’91-’06 XL with stock carb-Includes Küryakyn breather (late inlet)

8466 8467 8468 8469 $239.99

’91-’06 XL with stock carb-For use with H-D breather1 (late inlet)

8361 8376 $228.99

’84-’89 Big Twin with stock carb or S&S B Series5 (early inlet)

8496 8493 $228.99

’90-’91 Big Twin with stock carb (late inlet) 8500 8501 8502 8504 $228.99

’92 Big Twin with stock carb (late inlet) 8505 8506 $228.99

’93-’99 Evo Big Twin3 with stock carb Includes Küryakyn breather (late inlet)

8461 8462 8463 8464 $239.99

’93-’99 Evo Big Twin 3 with stock carb-For use with Screamin’ Eagle breather2 (late inlet)

8456 8459 $228.99

’95-’98 Evo Road King or Dresser with E.F.I.4 (Marelli inlet)

9734 $269.99

’99-’01 Twin Cam Road King or Dresser with E.F.I.4 (Marelli inlet)

9774 $269.99

’01-’05 Twin Cam with Delphi E.F.I. (late inlet) 9758 9759 9760 9763 $289.99

’99-’06 Twin Cam w/CV carb & ‘06-’10 Twin Cam with Delphi E.F.I. (except ’08-’10 Touring Models & Trikes)

9750 9751 9752 9754 $249.99

’08-’10 Touring Models & Trikes (late inlet) 9764 9765 9766 9767 $249.99

’91-’06 XL with HSR 42 Mikuni (late inlet) 9701 9707 $269.99

’93-’99 Evo Big Twin3 with S&S, E or G (late inlet) 8365 8367 $289.99

’93-’99 Evo Big Twin3 with HSR 42 Mikuni (late inlet) 9681 9687 $269.99

Footnote: 1. H-D Breather for XL Refers to Harley-Davidson P.N. 29281-91T. 2. Screamin’ Eagle Breather for EVO BT Refers to Harley-Davidson P.N. 29310-93. 3. Includes FXR2, FXR3 & FXR4. 4. Requires drilling hole in intake to provide vacuum for butterfly operation. 5. Requires drilling hole in Hypercharger back (& mounting bracket where applicable) for float bowl vent.

For kits listed in the top section of the chart, there is no need to purchase any additional components for these applications. The second section of the chart outlines many common applications where it is

necessary to start with a complete kit & then simply add an adapter or mounting kit to complete the package.

Each application lists “early inlet”, “late inlet”, or “Marelli Inlet” in parenthesis. An early inlet air cleaner will bolt directly to a Keihin Butterfly, Bendix, or Zenith carburetor. A late inlet air cleaner will bolt directly to Harley’s 40mm or 44mm Keihin CV carburetor as well as the Delphi E.F.I. system found on ’01 Softails & all ’02-‘10 Twin Cams with E.F.I. (except ‘08-’10 Touring). A Marelli inlet air cleaner will bolt to the Magneti Marelli E.F.I. system found on ’95-’01 Road Kings & Dressers.


J

K

D

D

I

DG

C

B

A

E FH

The Original Style case halves are no longer available, but aside from the butterfly shaft, all other components (trap doors, butterflies, filters, hardware…) are the same as New Style components.

8582 Butterfly Shaft with Bushings $8.99

9907 Bushings – Standard (pr) $2.99

9909 Bushings – Super Oversize (pr) $2.99

A 9906 Case Bolts & Washer Set (6 pcs) $7.99

B 9904 Trap Door Screw/Washer Set (8 pcs)

$5.99

C 9903 Trap Door Gasket $2.99

D 9913 Butterfly Shaft Caps with Screws, Washers, Bearings, Shim & Spring

$16.99

E 9910 Chrome Front Half $41.99

F 8513 K&N Filter Element $44.99

G 9911 Chrome Back Half - Early Inlet $41.99

G 9912 Chrome Back Half - Late Inlet $41.99

H 8580 Vacuum Pod Rebuild Kit $13.99

I 8581 Diaphragm Only $4.99

J 8599 Butterfly Shaft $9.99

K 9905 Butterfly Screw Set (4 pcs) $4.99

P/N

Model

#

Fitment

Carb Inlet

Head Attachment

Bolt Size

Does Bracket Use

Reduction Washers?

Dimensions (Above)A B C

Price

Evolution Sportster Models

8349 XL-6 ’88-’06 with CV Mikuni, Rev Tech, S.E.

Late 1/2” Yes 5-3/16” 1-3/16” 1-1/8” $36.99

8348 XL-5 ’86-’87 w/38mm Butterfly ’86-’90 w/Quicksilver, S&S B

Early 5/16” No 5-3/16” 1-3/16” 1-1/8” $41.99

Evolution Big Twin Models

8344 MB 2 ’90-’91 with CV ’84-’91 with Mikuni, Rev Tech, S.E.

Late 5/16” Yes 5-15/16” 1-7/16” 1-5/16” $41.99

8332 MB 2 ’92-’99 with CV, Mikuni, S.E. Late 1/2” No 5-15/16” 1-3/8” 1-5/16” $31.99

8346 MB 3 ’84-’89 with 38mm Butterfly S&S B

Early 5/16” Yes 5-15/16” 1 7/16” 1-5/16” $51.99

8587 MB 9 ’84-’91 with S&S E or G Late 5/16” Yes 5-15/16” 2-1/16” 1-5/16” $41.99’92-’99 with S&S E or G Late 1/2” No

8591 MF 1 ’95-’98 BT with Fuel Injection

F.I. Oval 1/2” No 5-15/16” 1-1/4” 2-1/2” $51.99

Pre Evolution Big Twin Models

8588 Universal NA NA NA NA NA NA $15.99

Twin Cam

8332 ‘99-’06 with CV or HSR42/45/48 ‘01-’10 with Delphi EFI (except ’08-’10 Touring & Trikes)

Late 1/2” No 5-15/16” 1-3/8” 1-5/16” $31.99

8374 ‘01-‘10 with Wild Things Throttle Body

Late 1/2” No 5-15/16” 1-3/8” 1-5/16” $36.99

8327 MF5 ’99-’01 Dressers & Road Kings with Magneti-Marelli EFI

F.I. Oval 3/8” No 5-15/16” 1-1/4” 2-1/2” $51.99

8326 TC9 ’99-’06 with S&S E or G Late 3/8” No 5-15/16” 2-1/16” 1-5/16” $41.99

8519 Enrichener for S&S E or G $20.99

8525* S&S E or G $44.99

8535* Wide S&S E or G, for use with Screamin’ Eagle breather on ’93-’99 BT & ’91-’03 XL

$41.99

8524 Mikuni 38mm roundslide $31.99

8553 Mikuni HSR42/45/48 $41.99

*These adapters require the purchase of longer breather bolts when used with Küryakyn Crankcase Breather Kits for EVO.

These mounting kits include everything necessary to install a Hypercharger, Pro-Hyper or Pro-R.

8333 Pre Evo Big Twin or XL with Stock Carb $10.99

8338 ’88-’90 XL with Stock Carb $51.99

8341 ’91-’06 XL with Stock Carb, includes Küryakyn Crankcase Breather

$62.99

8339 ’91-’06 XL with Stock Carb, for use with H-D Crankcase Breather

$51.99

8335 ’84-’89 Evo Big Twin with Stock Carb or S&S B

$51.99

8336 ’90-’91 Evo Big Twin with Stock Carb $51.99

8337 ’92 Evo Big Twin with Stock Carb $41.99

8340 ’93-’99 Evo Big Twin with Stock Carb, includes Küryakyn Crankcase Breather

$62.99

8342 ’93-’99 Evo Big Twin with Stock Carb, for use with Screamin’ Eagle Crankcase Breather

$51.99

9919 ’99-’06 Twin Cam with Stock Carb includes Küryakyn Crankcase Breather

$62.99

9924 ’01-’05 Twin Cam with Delphi EFI, includes Küryakyn Crankcase Breather

$72.99

9926 ’06-’10 Twin Cam with Delphi EFI (except ’08-’10 Touring & Trikes), includes Küryakyn Crankcase Breather

$69.99

9793 ’99-’06 Twin Cam with S&S E or G, includes Küryakyn Crankcase Breather

$93.99


PE

RF

OR

MA

NC

E

8588

Support Bracket Dimensions

8535

8553

8525

Give your engine a facelift with our Hyper Streamliner! Its graceful lines give the original Hypercharger a totally new look without affecting its outstanding performance. Easy bolt on installation in minutes!

Fits: Standard Hypercharger only

8474 Hyper Streamliner $38.99

If you have a need for more speed & want top performance from your bike then this is for you. Designed specifically to maximize airflow into the carburetor or throttle body, the Stinger’s two large raised scoops channel air through a high-flow foam filter element. This is an incredibly cost effective way to increase air flow in any standard Hypercharger. Easy four bolt replacement of any standard trap door. Sit down, shut-up, & hang on!

Fits: Standard Hypercharger only

8498 Stinger Trap Door with Filter (ea)

$51.99

8492 Replacement Filter Element (ea)

$16.99

A quick & classy alternative to the standard Trap Door. Five minutes & you have a whole new look.

8475 Black $24.99

8476 Chrome $24.99



U.S. Patent 7,029,152

Take advantage of these spectacular illusions, it is definitely the first of their kind. Throw the switch & these covers are instantly transformed. The smooth, mirror finished outer panels become a vortex of lights. Installs quickly & easily - in under an hour!

L.E.D. technology means there is no need to worry about draining your bike’s battery (provided the battery is in good condition & the lights are not left on for more than a couple hours). Get out there, the crowds are waiting!

Seven Color L.E.D. Technology Operates in Three Stunning Modes: Single color steady illumination

Single color flashing illumination with rheostat adjusted variable rate

Paint Mode: All lights in unison continuously cycle through all seven colors (red, lime, ice blue, sky blue, dark blue, purple, green) with an adjustable variable rate

Fits: Standard Hypercharger only—Includes switch & all wiring

8415 Infinity Streamliner (ea) $199.99


4768 250 V, 3 Amp Fuse (pr) $3.99

Dirty, mean, & nasty... this replacement cover for S&S E or G series air cleaners will send chills down your spine & send the neighbor kids running for their mothers. Constructed of a high-strength, extremely rigid composite material & is easy to install with the supplied hardware. Available in Chrome & Hot Rod Black. Replaces teardrop cover on S&S E or G carburetors only.

9940 Skull Air Cleaner Cover for S&S, Chrome (ea)

$99.99

9939 Skull Air Cleaner Cover for S&S, Hot Rod Black (ea)

$99.99

Patent Pending

Küryakyn comes slammin’ home with an affordable upgrade to the stock oval Twin Cam air cleaner cover. The Scarab Air Cleaner Cover adds a custom touch with racy contours & chrome grilled openings for additional air flow.

8407 Scarab Air Cleaner Cover without Notch (ea)Fits: ’02-’10 Electra Glides, Road Glides, Street Glides, Road Kings & Trikes (except Carbureted California Models), ’01-’10 Softail Models (except ’08-’10 FLSTSB & Carbureted California Models), & ’04-’07 EFI Dyna Models

$69.99

8408 Scarab Air Cleaner Cover with Notch (ea) Fits: All ’99-’03 Dyna Models, ’04-’05 California FXD & FXDX, ’99-’06 Carbureted California Electra Glides, Road Glides, & Road Kings, ’02-’05 California FLHTI, ’00-’06 Carbureted California Softails

$69.99


PE

RF

OR

MA

NC

E


U.S. Patent 7,029,152

Be transfixed by the mirage of dazzling L.E.D.’s in our Infinity Cover! Few things

draw more attention.

Seven Color L.E.D. Technology Operates in Three Stunning Modes:

Single color steady illumination

Single color flashing illumination with rheostat adjusted variable rate

Paint Mode: All lights in unison continuously cycle through all seven colors (red, lime, ice blue, sky blue, dark blue, purple,

green) with an adjustable variable rate

L.E.D. technology means there is no need to worry about draining your bike’s battery (provided the battery is in good condition & the lights

are not left on for more than a couple hours). Get out there, the crowds are waiting!

Fits: Stock ‘99-’06 Twin Cam Air Cleaners—Includes switch & all wiring

8416 Infinity Cover (ea) $199.99


4768 250 V, 3 Amp Fuse (pr) $3.99

Note: ’07-’10 Twin Cams with standard, single-screw oval air cleaner cover can be outfitted with an ’06-earlier H-D outer cover, H-D P/N 29121-01, which will allow installation of P/N 8416.

99319930

2!1/4”

9932

3”

9930

Universal fitment.

8515 Remote Crankcase Breather Filter

$31.99

8761

Unfortunately, almost all Harley-Davidson engines that vent the crankcase through the cylinder heads also expel oil through the same passages. Venting directly into the air cleaner, especially a free-flowing air cleaner, often results in an oily mess on the side of the bike. The banjo fittings & chrome tubes route the vented gasses upward so gravity can keep any expelled oil droplets in the engine where they belong. We recommend venting the crankcase to open air by running the vent line up & out of sight beneath the tank, but an optional catch tank is available for those who would rather vent to a closed container.

9930 Bluegrass Breather Kit, Long Leg (ea) Fits: ’93-’99 Evo Big Twin with Mikuni HSR series carb, ’91-’06 Sportster Models

$51.99

9932 Bluegrass Breather Kit, Short Leg (ea) Fits: ’93-’99 Evo Big Twin (most carbs except Mikuni HSR) ’99-’10 Twin Cam with Delphi EFI (except ’08-’10 Touring & Trikes) & most carbs

$51.99

9931 Catch Tank (ea) $51.99

If you need additional room between your air cleaner & the engine or fuel tank, these spacers will do the trick. Compatible with any CV bolt pattern air cleaner, these handy spacers are useful for many custom applications. 8510 7/8” CV Bolt Pattern Spacer $20.99

8512 5/8” CV Bolt Pattern Spacer $20.99

8564 1/4” CV Bolt Pattern Spacer $17.99

Included with our Hypercharger Kits for Twin Cam models, this breather kit installs between the air cleaner & the carb support bracket. The stock breather bolts & vent hoses are reused.

9920 Crankcase Breather Kit for ‘99-‘10 Twin Cam (except ‘08-’10 Touring & Trikes)

$36.99

9900 Replacement Rubber Boots (pr) $5.99

8999 Replacement Boots & Hoses (set) $8.99

2000 Replacement 1” Breather Bolts (pr) $10.99

2002 Replacement 1-3/4” Breather Bolts (pr)

$13.99

Maximum efficiency in crank-case ventilation is important for engine performance & engine gasket longevity. This kit is a must when installing a Hypercharger on a ’91-’06 XL or ’93-’99 Evolution Big Twin.

8518 Breather Kit for use with CV or HSR42/45/48

$31.99

Service your filter. Your bike will run better & your engine will last longer. All Küryakyn air cleaners use K&N filters. With proper maintenance, these filters will last many years.

85 K&N Filter Care Kit $12.99

Install in the intake manifold to help keep the fuel droplets in suspension, & assure a complete mix of gas & air.

8761 Turbulator for 2 Bolt - 1-7/8” & 48mm Manifolds (S & S B, Shorty E)

$19.99


9902 Late Inlet: 40mm Keihin CV, 44mm Keihin CV, Delphi EFI (except ’08-’10 Touring & Trikes)

$2.99

9901 Early Inlet: 38mm Keihin Butterfly, Bendix, Zenith, Tillotson

$2.99

99019902

These O.E.M. style breather parts can be used to replace lost or deteriorated stock pieces.

9975 Stock Length (1-1/4”) Twin Cam Breather Bolt (pr)

$8.99

9976 1/2” longer (1-3/4”) Twin Cam Breather Bolt (pr)

$9.99

9977 Formed Breather Hoses (pr) $6.99

8518


This great looking Crankcase Breather keeps oil from being ejected into the air cleaner through the breather system. Excess oil now runs back down into the engine, rather than running into the air cleaner to be blown all over your bike.

9917 Fits: ’93-’99 Evolution Big Twin Models with CV Carb

$62.99

9918 Fits: ’99-’06 Twin Cam Models with CV Carb

$59.99

We took a good look at what was going on in the H-D performance world & figured there had to be a better way. Many so-called innovations were rehashes of existing designs. If you keep doing the same things, how can you expect to see a different outcome? Our products are designed to not only make big power, but to solve some of the normal problems associated with high output engines such as hard starting, detonation (pinging), poor drivability & top-end noise. Wild Things kits can make up to 130+ horsepower & 120+ pound-feet of torque, but be as street friendly as it gets.

The Wild Things line includes a wide range of cams including the most powerful bolt-in cams available,

highly technologically advanced cylinder heads, pistons, & high-flow large diameter throttle bodies. We are putting tremendous effort into developing more new & advanced performance parts. The product line will continue to expand with thrilling new products.

How do you explain a beast with manners? Docile & smooth at low speed & cruise, but ready to pull your arms out of their sockets when you open the throttle. It’s all possible with the combination of the race bred Wild Things Heads & the unique Wild Things Cam designs. No other kit on the market can compare. 95” builds: Up to 120+ horsepower & 110 lb. ft. of torque. 103” builds: Up to 130 horsepower & 119 lb. ft. of torque. The Crusher Kit makes larger engines come to life using our “heads for flat top pistons” & our larger Cams.Consists of Wild Things Heads, matching domed 95” or flat top 103” big bore pistons, Wild Things Performance Cams, Wild Things 57 mm body or Mikuni carb, high-flow air cleaner, & performance exhaust system.

Check with your Küryakyn representative or go to www.kuryakyn.com

Total Parts: * Depending on options selected

A large boost in power from idle up. This kit is for those who want to stay with stock 88” in ‘99 to ‘06 or 96” in ’07-’10 bikes. The difference from stock will surprise you, & others! Many will think you have a big bore kit installed.Consists of bolt in cams, high-flow air cleaner, & performance exhaust system.


Total Parts: *Depending on options selected

Want some more bottom end & mid-range power? Add a pair of Wild Things Flat Top 95” Pistons to the TC1 /Quick Bump 88” kit & your bike will pull a lot harder for you. This build is great for heavy bikes. 85+ horsepower & 95+ lb. ft of torque is common with this build.Consists of TC-1 series bolt-in cams, flat top big bore pistons, high-flow air cleaner, & performance exhaust system.



As the name suggests, a lot of power for the money invested. Your buddies will think you have a lot more done to your bike than this. Responds well to mild headwork. 90 to 100 horsepower & 95 to 105 lb. ft. of torque is common with the 95” build, even more power with the 103”.Consists of TC-2 series bolt in cams, domed 95” or flat top 103” big bore pistons, high-flow air cleaner, & performance exhaust system.



QUICK BUMP 88”PULLER 95”CHEAP THRILL 95”

Focused On Helping Our Customers Get the Performance They Want In

the Most Cost-Effective Way Possible By Building the Most Technologically Advanced

Performance Parts On the Market!


PE

RF

OR

MA

NC

E

Küryakyn’s tuning center, World Class Tuning, hosts training seminars for our dealers’ technicians & also tunes Harley- Davidsons for the general public. For more information contact: World Class Tuning, Watertown, MN 952-955-5119.

®

CRUSHER 95”

Grind Lift Lift @ TDC Opening Closing Duration Lobe Center(inches) (inches) (degrees) (degrees) (degrees) (degrees)

TC-1/TC-1G/TC-1UIntake .510 .158 15 41 236 103Exhaust .498 .121 40 08 228 106

TC-2/TC-2G/TC-2D/TC-2UIntake .510 .169 18 50 248 106Exhaust .495 .145 48 14 242 107

TC-4G/TC-4D/TC-4UIntake .560 .217 26 54 260 104Exhaust .550 .181 52 20 252 106

TC-26G/TC-26D/TC-26UIntake .575 .175 18 50 248 106Exhaust .495 .145 48 14 242 107

TC-5GIntake .590 .225 27 59 266 106Exhaust .560 .189 58 22 260 108

TC-46G/TC-46DIntake .625 .230 26 54 260 104Exhaust .575 .182 52 20 252 106

TC-546G/TC-546DIntake .630 .234 27 59 266 106Exhaust .575 .182 52 20 252 106

IMPORTANT: Our TC-4, TC-46, TC-5 & TC-546 Cams are specially designed to allow you to use the stock starter in larger than stock engines & help eliminate detonation (pinging) up to 10.5:1 compression while using 92-octane premium fuel. Believe us when we say this is critical. It is also very rare for anyone else to offer you this combination.

Most cams trade low-end power & torque for upper horsepower or top-end performance for low-end torque. Küryakyn’s Wild Things Cams are finessed to give wide usable power-bands with strong low end, big torque, high horsepower & extended RPM ranges. Low noise & long valve train life are also features built into our Cams. No other cams on the market can replicate the results of Wild Things Cams, period!

®

All Cams designated without a letter suffix (example: TC-1) are chain drive style cams for ’99-’06 Twin Cams & use stock splined gear & chain (‘99 Models with keyed drive gear will have to install a splined gear)

All Cams designated with a “G” (example: TC-2G) are gear drive Cams & require an S&S gear drive & installation kit (sold separately)

All Cams designated with a “D” (example: TC-2D) are chain drive style Cams for ‘06 Dyna & all ’07-‘10 Twin Cams & use stock cam chain drives

All Cams designated with a “U” (example: TC-2U) are designed to upgrade ’99-’06 Twin Cam engines to use the ‘06 Dyna/’07-‘10 chain drive & oil pump (See sidebar for details)

Gear drives give you more accurate timing & more long-term power & reliability by eliminating the drive chain stretch & the possibility of tensioner failure on ‘99-’06 Models

allow you to upgrade your ‘99 to ‘06 Twin Cam to Harley’s new roller chain drive with hydraulic tensioners & the higher volume oil pump of the ‘06 Dyna & all ’07-‘10 Twin Cam Models.

With Wild Things® quiet-running Cam profiles & the H-D’s new drive system, your engine will be whisper quiet & have great performance. H-D’s new higher volume oil pump provides consistent & better oil pressure along with better scavenging. With U Series Cams, you can have the latest in Harley technology & Küryakyn performance in your ‘06 & earlier Twin Cam.

Converting ‘99-’06 silent chain cam drives to the ‘06 Dyna/’07-’10 Twin Cam roller chain requires new parts from H-D in addition to the Cam Shaft Set from Küryakyn. These parts are listed below, but can also be found in the H-D 2006 Dyna® parts catalog (#99439-06) or the applicable ’07-‘10 parts catalog for your bike.

26037-06 Oil Pump Assembly25355-06 Cam Support Plate Assembly4741 Support Plate Screws11461 Retaining Ring (front cam)25683-06 Inner Roller Chain39969-06 Inner Chain Tensioner25675-06 Outer Roller Chain39968-06 Outer Chain Tensioner25729-06 Spacer (.100 for cam alignment; use as required)

25731-06 Spacer (.110 for cam alignment; use as required)





25673-06 Crankshaft Sprocket (17 teeth)25728-06 34 Tooth Stock Rear Cam Sprocket

Note: ’99-’01 engines require Andrews 34 Tooth Rear Cam Sprocket, available from Drag Specialties as P/N 0925-0147. Note: Parts such as gaskets & screws may be needed to complete the conversion to roller chains.

®

(used only with ‘02-’06 engines)


(‘99-‘06 [except ‘06 Dyna]) (‘99-‘06 [except ‘06 Dyna])

Bolt-in low-end & mid-range power with a little more up top. 80+ horsepower possible with no head work in an 88”. Also works very well in 95 inch motors up to 10:1 compression. Gear drives give you more accurate timing & more long-term power & reliability by eliminating the drive chain stretch & the possibility of tensioner failure on ‘99-’06 Models.

420 Wild Things TC-1 Cams (set) $349.99

422 Wild Things TC-1G Cams (set) $349.99

470 Wild Things TC-1U Cams (set) $349.99

(‘99-‘06 [except ‘06 Dyna]) (‘99-‘06 [except ‘06 Dyna]) (‘06 Dyna & all ‘07-’10)

High lift version of the TC2-G. Great all around power potential from this cam. With the Wild Things Heads, Pistons, & Throttle Body, we have made over 120 H.P. A very street friendly Cam.

408 Wild Things TC-26G (set) $349.99


461 Wild Things TC-26D Cams (set) $349.99

Note: Some clearancing, valve springs & spacing required. We recommend Comp Cams Spring Kit (P/N 435).

Evo version of the venerable TC-46. Make that big incher come to life. Intended for engines 96 inches & up. Headwork, large carb, performance pipes, & high compression will really make this cam shine. Valve springs & spacing required. We recommend Comp Cams Spring Kit (P/N 435).

Fits: ’84-’99 Evolution Big Twin

404 Wild Things ER-46 Cam (ea) $219.99

Grind Lift Lift@TDC Opening Closing Duration Lobe Center(inches) (inches) (degrees) (degrees) (degrees) (degrees)

ER-46Intake .625 .218 24 56 260 106Exhaust .575 .163 56 16 252 110


Big power available in 95 inch & up motors. Increased compression & head work, large carb or throttle body & pipes will really make this Cam shine. Well over 110 horsepower is possible, even mid to high teens from a modified 95 inch.




Note: Valve springs & spacing required. We recommend Comp Cams Spring Kit (P/N 435).


Bolt-in performance Cam for 88 to 103 inch motors. Gain more power over the whole RPM range. 90+ horsepower is possible in an 88 inch with no head work, but really comes alive with more inches & higher compression.




(‘99-‘06 [except ‘06 Dyna])

High horsepower & torque cruiser cam for 103 inch & larger engines. High compression, headwork, large carburetor or throttle body, & performance pipes will bring out the most with this Cam.


Note: Valve springs & spacing required. We recommend Comp Cams Spring Kit (P/N 435).

(‘99-‘06 [except ‘06 Dyna]) (‘06 Dyna & all ‘07-’10)

A Wild Things Cam for engines over 100 C.I. Huge power available while still retaining good drivability & a quiet running engine. Really helps in starting those high compression large inch engines.




(‘99-‘06 [except ‘06 Dyna]) (‘06 Dyna & all ‘07-’10)

High lift version of the TC-4G. 95 inch & up motors can make some impressive power over a wide power band. 120+ horsepower possible in a 95 inch. Increased compression & head work, large carb/throttle body & performance pipes necessary if you want to make full use of this Cam.





PE

RF

OR

MA

NC

E

®

Forged from the highest-grade aluminum alloy designed for piston use —Making them the strongest piston on the market.

The special skirt shape & material means less break-in time, quieter running & a stronger resistance to scoring. The lightweight design results in less power robbed by the forces of inertia & less vibration.

Larger & deeper valve pockets will handle larger valves & cams without extra machine work. The decks are slightly raised for a tight squish with stock .045” thick head gaskets.

The redesigned dome shape on the high-compression piston for stock heads results in less pumping losses (robbed power) & better combustion efficiency & detonation control (pinging).

All kits come complete with pistons, pins, keepers & rings.

445 Forged 10.5:1 Domed Piston Kit for 95” Twin Cam (3.875” bore) $359.99

448 Forged 10.5:1 Domed Piston Kit for 95” Twin Cam (.010” over 3.875” bore)

$359.99

®

444 Forged 10.5:1 Domed Piston Kit for 95” Twin Cam (3.875” bore) $359.99

443 Forged 10.5:1 Domed Piston Kit for 95” Twin Cam (.010” over 3.875” bore)

$359.99

447 Forged Flat Top Piston Kit for 95” Twin Cam (.010” over 3.875” bore)

$349.99

458 Forged Flat Top Piston Kit for 103” Twin Cam including ‘07 or ‘08 96”–to–103” conversions (3.875” bore)

$349.99

449 Forged Flat Top Piston Kit for 103” Twin Cam including ‘07 or ‘08 96”–to–103” conversions (.010” over 3.875” bore)

$349.99

475 Forged Dish Dome Piston for 103” Twin Cam with Wild Things Heads (P/Ns 428, 431, 432), 3.875 bore

$349.99

459 Forged Dish Dome Piston for 103” Twin Cam with Wild Things Heads (P/Ns 428, 431, 432), .010” over 3.875 bore

$349.99

Fits all ’99-’10 Twin Cam—Including ’08-’10 Touring

Set up to take up to .640” lift cam

Utilizes equal length head bolts to minimize cylinder distortion & promote

consistent head gasket squish. Requires purchase of four long OEM headbolts, sold

separately. (H-D P/N 16478-85A)

Extra cooling fin area, more than any other heads on the market

Larger & improved breather passages, requires crankcase breather kit with 1/2”-13 breather bolts

Larger & relocated oil drains get the oil down out of the heads

All stock parts will mount to head

’06-’10 with Wild Things Throttle Body require P/N 457 Flanges (If using stock Throttle Body, must use ’05-earlier stock flanges)

Efficient bathtub combustion chambers

Proprietary valves designed on the flow bench to match Wild Things ports

Heads come completely assembled with High-strength stainless steel valves & high-performance valve springs with titanium top retainers

Intake Ports - 3/8” raised high flow & high velocity with 1.980” stainless intake valves

Exhaust Ports - High velocity constant radius “D” shaped high flow ports with 1.630” stainless exhaust valves


®

The most technologically advanced heads on the market. Mike Roland’s designs carefully balance the production of awesome horsepower & torque with the important qualities of a good street motor - starts as easy as a stock bike, runs on pump gas without any detonation, runs cooler than stock, & is as tractable as a stock bike.

95” build requires use of Wild Things Pistons (P/Ns 444 or 443)

103” builds require use of Dish Domed Pistons (P/N’s 475 or 459)

Combustion chamber machined with 15-degree squish

Yields 10.5 to 1 compression ratio

428 Wild Things Forged Street Heads, Black - For Wild Things Domed or Dish Dome Pistons (set)

$1,995.99

431 Wild Things Forged Street Heads, Bright Bead Blast - For Wild Things Domed or Dish Dome Pistons (set)

$1,995.99

432 Wild Things Billet Street Heads, Polished - For Wild Things Domed or Dish Dome Pistons (set)

$2,995.99

Stiff pushrods are a very important part of a stable valvetrain… these are as stiff as they come!

4130 chromoly steel tubing, .049” wall thickness

Adjuster portion features 4140 high-strength steel with an induction hardened tip

Special adjustment design allows installation without disassembling rocker boxes!

Fits: ’99-’10 Twin Cams

438 Comp Cams Fast Times™ Adjustable Pushrods (set)

$124.99

Designed for S&S Gear Drives, this kit includes upgraded bearings to replace the stock bearings, a new snap ring, & a gasket for the cam cover. Required for all Wild Things gear-drive Cams used with S&S Gear Drive Kits.

418 Andrews Gear Drive Installation Kit (ea) $49.99

®

These gaskets are made of three layers of stainless steel with outer layers coated with Viton rubber. The center layer gives the gasket strength. These gaskets move with the head both vertically & horizontally to maintain the seal. MLS Head Gaskets are available in various thicknesses, so setting up your quench area or “squish band” is no problem.

483 MLS Head Gasket - .030” (pr) $39.99





This high quality High Lift Spring Kit is a must when using any of our high performance Cams (TC-4G, TC-46G, TC-5G, TC-26G, TC-546G, ER-2, or ER-46) on ’84-’99 Evolution or ’99-’04 Twin Cam engines.

Titanium top retainer

Interference wound double springs with damper

For use with cams up to .640” lift

180 lb. seat pressure

Can be used in ‘05-later engines if valves & guides have been converted to 5/16” diameter

435 Comp Cams High Lift Spring Kit (set) $159.99

®

Provides all the gaskets & seals needed when changing a cam (cam cover, push-rod tubes, rocker boxes, etc.)

Fits: ’99-’10 Twin Cam engines

481 Complete Cam Chest Gasket Set (set) $49.99

®

This EST (Extreme Sealing Technology) Top End Gasket Set uses the best possible materials available for every gasket in the kit. There is no compromise in this kit, MLS (Multi-Layer Steel) head gaskets, blue Viton valve stem seals, & AFM (Aluminum Foam Material) gaskets for cam & rocket box covers make these truly the best kits available. Includes every gasket & seal from the base gasket right up to the air cleaner.

Fits: 95”& 103” Twin Cam Engines – includes .045” head gasket

480 EST Hi-Performance Top End Gasket Kit (set)

$99.99

Fine wire design increases ignition power & extends the life of these superior plugs.

325 AXS4164DP (pr) Fits: All ’99-’10 Twin Cam, all ’88-’10 Sportsters, ’88-’00 GL1500, ’96-’03 Valkyrie, ’84-’87 GL1200

$14.99

326 XS65 (pr) Fits: ’84-’99 Evo B.T. (carb & EFI), ’78-’81 80” Shovel, ’75-’80 74” Shovel

$14.99

Improve performance over the stock chain drives by accurately controlling valve timing & reducing frictional losses. Requires Andrews Gear Drive Installation Kit.

419 S&S Gear Drive Kit (ea) $373.99

Note: Installation Kit (P/N 418) required.


PE

RF

OR

MA

NC

E

440

These split flow high volume nozzles divide the fuel flow around the valve stem & valve guide. When used in our 57mm throttle body the fuel is directed into the highest flow areas of the port & directly at both sides of the valve opening giving you the ultimate in fuel distribution. Drivability & horsepower are enhanced. They flow enough fuel for even the nastiest of street motors.

Fits: Wild Things 57mm Throttle Body for ’06-’10 Twin Cam (P/N 469). Can also be used on all ’06-’07 Stock H-D and S-E 50mm Throttle Bodies and ’08-’10 Stock & S-E 50mm Throttle Bodies for Softail & Dyna

468 High Flow Fuel Injection Nozzles (ea)

$99.99

467

®

A common misconception is that throttle body size must be perfectly matched to the size of the engine. The dyno chart (below) proves this is not true. As you can see, a properly mapped 52mm or 57mm throttle body will provide identical performance in smaller displacement engines. If your stock throttle body is the limiting factor in your current build it only makes sense to buy a larger throttle body. You’ll sacrifice nothing with your current build & when you decide to add those Wild Things® Heads, you won’t have to upgrade your throttle body again, too.

Note: Softail Models require fuel supply tube, P/N 441. Touring Models require spacer kit (P/N 442) any model using a Küryakyn Air Cleaner requires Support Bracket (P/N 8374).

440 Wild Things Throttle Body & Manifold (ea) $623.99

439 Wild Things Throttle Body & Manifold for 1.800” Intake Ports (ea) $623.99

455 Wild Things Throttle Body with Wide Manifold (ea) $623.99

456 Wild Things Throttle Body with Wide Manifold for 1.800” Intake Ports (ea) $623.99

441 Steel Fuel Supply Tube for Softail (ea) $10.99

442 Spacer Kit for Touring Models (ea) $41.99

8374 Air Cleaner Support Bracket (ea) $36.99

Note: Some larger than stock engines use taller cylinders than stock. P/N’s 455 & 456 are designed for these applications that require a wider intake manifold. The design allows for trimming to length for your particular application.


®

Now you can let your engine really breathe! Stock throttle bodies restrict airflow, robbing power, especially from modified engines with large displacement &/or high-flow heads. With our 57mm straight-bore throttle bodies, you can increase horsepower big-time in Delphi fuel injected Harleys. A larger plenum area, longer short side radius for greater & smoother flow, & relocated nozzles for better fuel distribution are just a few of the improvements. Virtually all stock components are reused & will bolt onto the throttle body without any modification. Our throttle body is designed with the stock Delphi air cleaner bolt pattern so it will accept any H-D or Küryakyn air cleaner. It even allows you to retain your factory cruise!

Note: Wild Things Intake flanges are required & must be purchased separately.

469 Wild Things Throttle Body (ea) $699.99

457 Wild Things Intake Flanges for ’06-’10 Twin Cams with Wild Things Heads or ’05-earlier style Screamin’ Eagle Heads (pr)

$83.99

467 Wild Things Intake Flanges for ’06-’10 Twin Cams with Stock or Screamin’ Eagle Heads (pr)

$72.99

IMPORTANT: As with any performance product, tuning is essential to achieve maximum gains in horsepower & torque. Stock or aftermarket ECU re-mapping is required!

Wild Things® Throttle Bodies are the Best

Flowing Throttle Bodies on the Market. They’re Also One of the Best Values!

469

®

By Dobeck Performance

Wild Things has teamed with Dobeck Performance to bring you an easy & affordable way to adjust your fuel injection system to accommodate modifications to your motorcycle’s exhaust system, air cleaner, or engine components.

The Wild Things Fuel Injection Controller is load based. Aside from reading throttle position & R.P.M., it also takes into account the load the engine is under. Even though you may encounter the same throttle positions at the same R.P.M.s in different riding situations, the engine’s fuel requirement may not be the same because the engine may not be under the same load.

The Wild Things Fuel Injection Controller allows you to tune the fuel injection much the same way you jet a carburetor.

Wild Things Fuel Injection Controllers offer plug & play installation. There is no need to compromise the integrity of the stock wire harness.

9216 Fits: All ’95-’05 Evolution & Twin Cam Models with Fuel Injection (ea)

$244.99

9217 Fits: All ’02-‘05 V-Rod Models (ea) $244.99

9219 Fits: All ’06 Twin Cam (ex Dyna) with Fuel Injection (ea) $244.99

Throttle position sensor-based system simplifies the process of fuel-injection tuning

Enables you to fine-tune the fuel mixture throughout the entire rpm range with the touch of a button

Increases power & improves throttle response

Very user friendly; plugs into the existing harness on the bike

Perfect for pipe & air cleaner type hop-ups

No computer or software is required, simply punch in the values supplied with the Fuelpak

Values for Vance & Hines, Küryakyn Crusher, & other aftermarket exhaust included

Includes all necessary mounting hardware

235 Fits: All ‘01-‘06 Softail & ‘07-’10 Softail with smaller than 200 MM Tire (V&H #61001A)

$279.99

238 Fits: All ‘07-‘10 Sportster & ‘07-’10 Softail with 200MM Tire (V&H 61007A)

$279.99

236 Fits: All ‘02-‘07 Electra Glides, Road Glides, Street Glides, & Road Kings (V&H #61003A)

$279.99

252 Fits: All ‘08-’10 Electra Glides, Road Glides, Street Glides, & Road Kings (V&H 61009)

$279.99

237 Fits: All ’04-’10 Dyna, ’02-’10 V-Rod, & ‘09-’10 XR1200 (V&H #61005A)

$279.99

Note: Requires the use of a high-performance air filter.

By Vance & Hines


PE

RF

OR

MA

NC

E

The most powerful tuning tool available for your motorcycles ECM, bar none! This one tool contains three powerful programs including Mastertune tuning software, Data Master data acquisition & VTune, a self tuning software solution. Mastertune has over 20 tables and parameters to optimize your ECM including air-fuel mixture & timing. (Some early year bikes may have fewer tables)

For ‘01-’10 Delphi Equipped H-D motorcycles

Tunes your factory ECM - No add on boxes

Save & restore original factory calibration

Detailed data acquisition aids in tuning & diagnostics

Adjust for different fuel injector flow rates & engine size

Change factory RPM limit & speedometer calibration

2-D & 3-D graphing of tables to help visualize tuning maps

9220 MasterTune Single Bike Kit (ea) $424.99

9221 MasterTune Dual Bike Kit (ea) $624.99

9222 MasterTune Serial Cable (ea) $34.99

9223 MasterTune USB Cable (ea) $78.99

9224 MasterTune for Magneti Marelli (ea) $424.99

Calibrations Built by Mike Roland Available @ www.kuryakyn.com


Trident Tips

Patent Pending

Beast Oval Mufflers maximize the horsepower potential of your bike while providing a mellow, deep tone! Beast Ovals make great sound

without waking the neighbors or drowning out your bike’s stereo. Large volume & innovative baffle design lay waste to the theory that loud pipes make more power. Bluing or discoloration won’t be a problem - these new mufflers are shrouded with formed heat shields.

Fits: ’95-’10 Electra Glides, Road Glides (except ’09 FLTRSE), Street Glides (except ‘10 FLHXSE), Tour Glides, & Road Kings

479 Beast Oval Mufflers (pr) $779.99

Note: Installation on ‘10 FLHX or FLTRX requires conversion to True Dual or Crusher Dual head pipes.

Slip Stream Tips

KÜRYAKYN’S CRUSHER EXHAUST PERFORM, SOUND & LOOK BETTER THAN THE

LEADING BRANDS.Mike Roland & Küryakyn’s industry leading design team engineered the Crushers for

performance, a sound, & looks!

Crusher Mufflers provide a low deep rumble with no swishing, tweeting or tinny noises while

delivering power that’ll pull your arms off!Equipped with your choice of tips or choose to

add our awesome Beast Ovals. No matter which style you choose,

will put you at the front of the pack!Note: Küryakyn makes no warranty regarding discoloration of chrome exhaust

products. Discoloration is a result of heat & is not a manufacturing defect.

The Crusher name has become synonymous with performance. Performance throughout the RPM range! Looks to die for & quality only Küryakyn can bring you. Crusher Mufflers are acoustically tuned for that deep low rumble you will love .They provide lower decibel levels at cruising speeds & an authoritative growl at wide open throttle. High-tech stainless steel packing provides added longevity!

490 Crusher Mufflers with Slip Stream Tips (pr) Fits: ’09-’10 Electra Glides, Road Glides, Street Glides, & Road Kings*

$551.99

491 Crusher Mufflers with Trident Tips (pr) Fits: ’09-’10 Electra Glides, Road Glides, Street Glides, & Road Kings*

$551.99

498 Crusher Mufflers with Slip Stream Tips (pr) Fits: ‘95-’08 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings

$551.99

499 Crusher Mufflers with Trident Tips (pr) Fits: ‘95-’08 Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings

$551.99

*Installation on ‘10 FLHX or FLTRX requires conversion to True Dual or Crusher Dual head pipes.

495 Heat Shields for Crusher Mufflers (pr) $103.99

492 Replacement Trident Tip (ea) $83.99

493 Replacement Slip Stream Tip (ea) $51.99

®

®

We have worked with Cometic to develop a gasket that won’t squeeze out into the exhaust port & restrict flow. Mesh type gaskets are notorious for obstructing the exhaust port. Don’t let a cheap gasket rob you of hard earned horsepower!

Fits: All Evo & Twin Cam engines

482 Exhaust Port Gaskets (pr)

$9.99

Straight pipes sound sweet, but for street use they’re a performance disaster! Here’s an inexpensive way to get back some of that lost horsepower & gas mileage without affecting the sound.

Fits: Most 1-3/4” O.D. Twin Cam, Evolution Big Twin & XL exhaust systems

9155 Torque Cones (pr) $31.99

For optimum performance, Küryakyn recommends also adding one of our high-flow Air Cleaners & a fuel injection tuning device such as the Vance & Hines Fuelpak or Master Tune Kit from TTS (see pg 231).

Küryakyn makes no warranty regarding discoloration of chrome exhaust products. Discoloration is a result of heat & is not a manufacturing defect.


PE

RF

OR

MA

NC

E

477

488

Left Side of Power Cell & True Duals for ‘09

We’ve combined performance, sound & great looks into one package. With Crusher True Duals, each cylinder breathes through its own

head pipe & muffler, greatly improving flow & making the bike much easier to tune. Power is increased as heat is reduced. ’95-’08 left side pipes tuck in close for passenger comfort. Crusher True Duals for ’09 & ’10 bikes runs the left pipe beneath the motorcycle; well away from the passenger’s feet & legs. Crusher True Duals include heat shields & mounting hardware.

All that’s left to do is choose the mufflers to complete your high-performance package – Crushers or Beast Ovals!

Fits: Electra Glides, Road Glides, Street Glides, Tour Glides, & Road Kings

496 Fits: ’95-’06 Models (set) $419.99

497 Fits: ’07-’08 Models (set) $439.99

477 Fits: All ’09 Models (set) $439.99

476 Fits: All ’10 Models (set) Note: FLHX, FLTRX require Left Side Muffler Mount Kit (P/N 560).

$439.99

494 ‘95-’06 Exhaust Bracket $17.99

560 Muffler Support Bracket & Rubber Grommet (ea) Fits: ‘95-’10 Touring Models (Mounts 1 muffler)

$19.99

Küryakyn’s Crusher Duals with Power Cell integrate a unique crossover for increased horsepower & torque. The Power Cell is hidden by a hot looking, stylized heat shield. Much like the stock 2009 design, the left pipe runs beneath the motorcycle, well away from the passenger’s feet & legs. Crusher Duals with Power Cell include heat shields, mounting hardware. All that’s left to do is choose the mufflers to complete your high-performance package – Crushers or Beast Ovals!

488 Fits: All ’09 Electra Glides, Road Glides, Street Glides, & Road Kings

$529.99

588 Fits: All ’10 Electra Glides, Road Glides, Street Glides, & Road Kings Note: FLHX, FLTRX require Left Side Muffler Mount Kit (P/N 560).

$529.99

560 Muffler Support Bracket & Rubber Grommet (ea) Fits: ‘95-’10 Touring Models (Mounts 1 muffler)

$19.99

Note: ’95-’06 motorcycles equipped with aftermarket ECUs with O2 sensors must order Crusher True Dual Head Pipes (P/N 497) & ’95-’06 Exhaust Bracket (P/N 494).

+

+

VIS IT WWW.KURYAKYN.COM FOR CUSTOMER TEST IMONIALS

THE BEST FLOWING A IR CLEANERS , THE BEST

PERFORMING & SOUNDING EXHAUST & THE MOST

POWERFUL TUNING TOOL MAKE TH IS THE MOST

E F FECT IVE A IR CLEANER/EXHAUST/TUNER COMBINAT ION

EVER TO EX IST FOR YOUR HARLEY TOURING MOTORCYCLE !

LARGE POWER INCREASE THROUGHOUT ENTIRE RPM RANGE

INCREASED THROTTLE RESPONSE

DRIVABILITY NEVER EXPERIENCED BEFORE

COOLER TEMPS FOR YOU & YOUR PASSENGER

EXCELLENT FUEL MILEAGE

A SOUND YOUR FRIENDS WILL ENVY

STOCK 96 VS. THE PERFECT STORM14 Horsepower & 17 ft.lbs of Torque Gain

STOCK 110 VS. THE PERFECT STORM23 Horsepower & 25 ft.lbs of Torque Gain


VIS IT WWW.KURYAKYN.COM FOR CUSTOMER TEST IMONIALS

OUR MOST POPULAR PERFECT STORM COMBINATIONS FOUND IN EASY TO ORDER KITS!


PE

RF

OR

MA

NC

E

PERFORMANCE, SOUND, & LOOKS!THE PERFECT STORM WITH HI-FIVE MACH 2

AIR CLEANER, CRUSHER TRUE DUALS & MUFFLERS & TTS MASTERTUNE:

00-1001 Fits: ’02-’06 Touring with Hi-Five Mach 2 & Trident Mufflers $1,666.99

00-1002 Fits: ’02-’06 Touring with Hi-Five Mach 2 & Slip Stream Mufflers

$1,666.99

00-1003 Fits: ’07 Touring with Hi-Five Mach 2 & Trident Mufflers $1,686.99

00-1004 Fits: ’07 Touring with Hi-Five Mach 2 & Slip Stream Mufflers $1,686.99







THE PERFECT STORM WITH STREET SLEEPER AIR CLEANER, CRUSHER TRUE DUALS & MUFFLERS

& TTS MASTERTUNE:00-1011 Fits: ’02-’06 Touring with Street Sleeper & Trident Mufflers $1,566.99

00-1012 Fits: ’02-’06 Touring with Street Sleeper & Slip Stream Mufflers

$1,566.99

00-1013 Fits: ’07 Touring with Street Sleeper & Trident Mufflers $1,586.99

00-1014 Fits: ’07 Touring with Street Sleeper & Slip Stream Mufflers $1,586.99







DON’T GET STUCK WITH THE SAME OLD TIRED

20TH CENTURY PARTS. MOVE INTO THE 21ST

CENTURY & EXPERIENCE THE ULTIMATE IN...

Trident Tips

Slip Stream TipsMach 2

Air CleanerPatent Pending

Product Description Page #

Accent Lights4, 56-58, 141-142, 156, 158 196

Accent Rings for ISO-Grips 65Accessory Pouch 6, 71Adapter Studs 49Adapters for Footpegs (Splined) 92Adjure Products 41Adjustable Passenger Footpegs 8, 105-106Air Cleaner Adapters/Mount Kits 218, 221, 224Air Cleaner Covers 222-223Air Cleaners 24, 214-224Air Deflectors 21, 190-191Air Filter Care Products 224Air Force Blaster/Master Blaster/Sidekick 209

Air Pressure Gauges 211Allen Wrench Sets 211Antenna Mount Flag 203Antennas 202Anti-Reversion Cones/Torque Cones 233Anti-Rotation Pass. Peg Mounts 103Anti-Seize 212Ape Hangers 80Armrests 22, 192Audio Products 71, 175

Axle Caps/Covers 130-131, 161-162

Backrest Mounts 195-198Backrests & Pads 195-197

Bags/Bag Accessories 15-16, 22, 172-184

Ball Joints 112Banjo Bolt Covers 75, 128, 134Battery Chargers 211Battery Gauge 67Batwing Fairings 17, 186Belt Guard Accent 161Belt Guards 160Bezels, Silver Bullets 48Big Dog Peg Adapters 91Bike Covers 183Bike Dolly 206Bleeder Screw Covers 128Bluegrass Breather Kits 224Boards, Driver & Passenger 7-8, 92-93Board Extenders 93Boomerang Frame Covers 12, 163Braided Grips 5Braided Levers 73Brake Arms, Extended 114Brake & Clutch Control Dress-up Kit 75

Product Description Page #Brake & Clutch Levers 72-73Brake or Clutch Accessory Mount Kit 4Brake Bleeder Screw Cover 128Brake Caliper Covers 128Brake Pedal Arm Cover 133Brake Pedal Pads/Covers 83-89Brake Pedals 114Brake Rod Cover, XL 112Breather Bolts 224Bulbs 46, 48, 54-55

Bullet Lights 46-48, 50-51, 53, 165

Bullet Tachs 68Burly Brand Lite Clutch Kit 211Butterflies for Hypercharger 215, 220Cable Clamps 65Cable Covers 75, 212Caliper Covers 128Caliper Skins 129Cams 226-227Carburetor

Adapters 218, 221Support Brackets 221Tops 141

Cell Phone Mounts & Holders 70Choke Knob Cover 123Cigarette Lighter/Power Points 71Clamps 49, 65Cleaning Supplies 212Clevises 96, 98Clocks 68Clothing 210Clutch & Brake Levers 72-73Clutch Cable Adjuster Cover 74Clutch Cable Ferrule Accent 148Clutch Cable Ferrule Covers 75Coil Covers 142, 150Control Covers (Handlebar) 74-75Covers, Motorcycle 183Crampbuster 67Crankcase Breather Kits 224Cruise Arm Mark III & IV 100Cruise Assists, Throttle 66Cruise Boards 97Cruise Pegs & Mounts 6, 95-103Crusher Exhaust 232-233

Curved License Plate Frames/Mounts 14, 50, 53, 165-169

Curved Side Mount License Plate Mounts 169

Custom Tie Down Brackets 23, 207Cylinder Base Covers 12, 144-147, 149

Product Description Page #Cylinder Heads 228Dash Panel Inserts 120-121Dash Trim for Road King 123Deep Dish Bezels with Lenses 52Deer Alerts 209Detachable Saddlebags 18-19Detail Products 212Dip Sticks 150Disc Locks 210Doc Bailey's Products 212Downtube Covers 135-136Drink Holders, Driver 5, 69Drink Holders, Passenger 5, 22, 194Driving Lights 4, 42-45 Dryers 209Electrical Power Point 71Electromagnetic Cruise Assist 67End Caps for Grips 64-66Engine Covers 22, 138-151Engine Guards (Ergo) 102Engine Performance Parts 225-235Engine Stabilizer 23, 211Engine Stabilizer Link Cover 12Exhaust Systems 232-235Exhaust Tips 159Exhaust Port Gaskets 233E-Z Brake 114EZ Chock 207E-Z Shift 113EZ Slide 206Fairing 6, 17, 187Fairing Accents 10-11Fairing Mounted Bag 16Fairing Trim 10-11, 126Fender Accents 9, 14, 127, 159Fender Extensions 131Fender Ornaments 127Fender Skirt 9, 158Fender Strut Lights 44Fender Tip Lens Grills 9, 127Fender Tip Lenses 52Fender Tips/Accents 14, 127, 160Firedomes 143Flags/Mounts 203Floorboards 7-8, 92-93Floorboard Covers 94Floorboard Exhaust Boot Guards 8Floorboard Flip Blades 6, 101Floorboard Mounted Cruise Pegs 6, 100-101Floorboard Spacers/Extenders 93Footpeg Extensions 91Footpeg Mounting Hardware 91, 98Footpeg Mounts/Clamps 97-98Footpegs 82-90Fork Braces 128Fork Clamps 49Fork Lock Cover 123Fork Covers 130Fork Mount Wind Deflectors 21Fork Mounted Driving Lights 44-45


We’ve got thousands of products & as we’re sure you know, not everyone thinks alike. So be generic when you’re searching our index - we’ve tried to

generalize our Product Descriptions in the hopes to reach the masses.

Product Description Page #Fork Slider Covers (Upper) 125Forward Controls/Extenders 91, 115

Frame Covers 12, 133, 152, 156, 163

Front Motor Mount Cover 132Front Run-Turn Controller 39Fuel Door GPS/Accessory Mount 121Fuel Door Latch 121Fuel Injection Control Module 231Fuel Injection Nozzles 230Fuel Injection Tuning 231Fuel Line Fitting Cover 123Fuel Tank Cross-Over Line Cover 135Fuel Tank Trim for XL 123Fuel Treatment 212Fuel/Battery Gauge (L.E.D.) 122Fuelpak 231Gas Caps 122Gaskets 229Gauges 67-68Gauge Bezels 118, 120Gear Drive/Installation Kit 229Glove Box Accents 119GPS Mounts & Holders 6, 70Grip Warmers 65Grip End Weights 64Grips/Grip Accessories 5, 60-67H.I.D. Lighting 40Halogen Bulbs 48, 54-55Handlebars & Risers 80Handlebar Accessory Mounts 70Handlebar Clamps/Mounts 70Handlebar Control Covers 74Handlebar Electrical Power Point 71Handlebar Master Cylinder Cover 75Handlebars & Accessories 80Handle-Grips 60-63Head Bolt Covers 143Headlamp Bulbs 54-55Headlamps 40-41Headlight Housing 40Headlight Visor 126Headlights 40-41Heads 228Headsets 23, 201Heat Deflectors 21, 190-191Heat Demons Grip Warmers 65Heat Shields (Exhaust) 140, 232Heat Shields (Saddle) 21, 190-191Heated Grips 65

Heelrests (Stirrups) 83-84, 86-87, 89-90

Heel Shift Eliminator 114Heel Shift Lever (Folding) 113Heel-Toe Shifter 113-114Helmet Lock 64, 210Hidden Horns 159Hi-Five Mach 2 Air Cleaner 24, 217Hi-Flow Air Cleaner Backplates 24High Flow Fuel Injection Nozzles 230High Performance Products 213-235

Product Description Page #Highway Boards/Pegs/Mounts 6, 95-103Hitches 23, 200Horn Covers 13, 142-143Horns 159Hot Spots/Hot Sleeves 22, 210Hub Filler 129Hyper Streamliners 222Hypercharger Air Cleaners 215, 218-221

Adapters 218, 221Brackets/Components/Mount Kits 221Trap Doors/Butterflies 220-221

Inner Fairing Cover Plate 79Inner Fairing Accents 11Inner Fender Accent 160Inner Primary Covers 12, 146-147Inspection Sticker Plates 170Instrument Visors 120Intake Support Bracket 221Intakes 214ipod Mounts & Holders 70, 71, 186ISO Products

Boards 92Grips/Throttle Boss 4, 61, 63, 66Pegs 88, 97

K & N Filter Care Kit 224Kewlock 64Kickstands & Components 208

L.E.D. Accent Lights 56-58, 140-141, 156, 158, 198

L.E.D. Battery Gauge 67L.E.D. Bulbs 46, 54L.E.D. Bullet Lights 38, 46L.E.D. Coil Cover 142L.E.D. Conversion for H-D Tombstone Taillight 53

L.E.D. Fuel/Battery Gauge 122L.E.D. Infinity Horn Cover 142L.E.D. Infinity Saddlebag Latches 156L.E.D. Infinity Streamliner 222L.E.D. Infinity Timing Cover 141L.E.D. License Plate Bolt Lights 170L.E.D. License Plate Illuminators 170L.E.D. Marker Lights 44L.E.D. Mini Bullets 44L.E.D. Clix Pods 22L.E.D. Reflector Bulbs 48L.E.D. Strut Lights 44L.E.D. Taillights 36, 38L.E.D. Timing Cover 140-141L.E.D. Turn Signal Inserts 38Late Style Turn Signal Kit 53Lazer Nodes 143Leather Care Products 212Levers 72-73License Plate Flag Mount 203License Plate Frames/Mounts 14, 165-170License Plate Hardware Kits 14License Plate Helmet Lock 210License Plate Mounting Hole Covers 50, 170Light Bars, Front 42-45

Product Description Page #Light Bars, Rear 12, 13, 155, 158Lighted Fender Skirt 158Lighted Lower Saddlebag Accents 158Lighted Phantom Covers 161-162Lighted Screws 170Light Shift Clutch Kit 211Lighted Swingarm Covers 161-162Liquid Horsepower (LHP) 212Lizard Lights 4, 56-58Load Equalizer Adapter 39Load Equalizers 37, 39Lock Reminder Cords 210Lockable O!sets 103Locks 210Loctite 212Lower Belt Guards 161Lower Frame Cover 163Lower Front Frame Cover 133Lower Leg Accents/Covers 9, 125, 129Lower Saddlebag Accents, Lighted 158Luggage Racks 198-199

Luggage/Luggage Accessories 15-16, 22, 172-184

Magnum Quick Clamps 98Marker Lights & Mounts 44Marlin Products 68Master Blaster 209Master Cylinder Covers, Front 75Master Cylinder Covers, Rear 134Master Tune Kits 231Medallions 24, 127, 217Metal Polish 212Mid-Frame Air Deflector Accents 191Mid-Frame Covers 152Mini Bullets 44Mirror Adapters 78Mirror Lights 77-79Mirrors 6, 76-79Motor Mount Cover 132Motorcycle Audio 71Motorcycle Covers 183Mu"ers 232Mu"er Support Bracket 233Mustache Bars 99Nacelle Accents 119Neck Covers 135-137Neutral Switch Covers 151O!set Highway Pegs 95-96O!set Mounts 98Oil Dipsticks 150Oil Filler Caps/Cap Accents 150Oil Filler Spout Cover 144Oil Line Covers 144, 149Oil Line Nacelle 149Oil Pressure Sender Covers 150Oil Sender Switch Cover 150Panacea Adapters 37Panacea Taillight Systems 36-37Passenger Armrests 22, 192Passenger Armrest Pouch 22


IN

DE

X

Product Description Page #Passenger Board Covers 94, 156Passenger Board Mounts 7, 104-105Passenger Board Inserts 94Passenger Boards 7, 92-93Passenger Grab Rails 194Passenger Drink Holder 22, 194Passenger Pegs & Mounts 7, 8, 106Passing Lamps 41P-Clamps 49Peg Mounts 8, 98Pegs 82-90

Flamin' 83ISO 88Kaiser 86Liberator 84Mini Dagger 85Pilot 87Retro 87Stiletto 86SweptWing 83Swingwing 99Switchblade 90Widow 84Zombie 85

Performance Kits/The Perfect Storm 213, 234-235Pet Carrier 15Petcock Cover 123Phantom Covers 161-162PIAA Bulbs 55Pistons, Twin Cam 228Pivot Bolt Covers 162-163Plug-N-Play Sissy Bar Mount 195Pod II, The 183Point Covers 141Polish 212Power Point Charger 71Pulsing Bulbs 55Pushrods 229Quick Clamps 98Quick Release Windshields 20Radio Trim 11Rainbow Strobes 54Raptor Bar, Sissy Bar 196Rear Axle Covers 161-162Rear Bar Accent 50Rear Caliper Cover 128Rear Cylinder Base Covers 12, 144-145, 149Rear Fender Accents 14Rear Master Cylinder Covers 134Rear Shift Lever Eliminator 114Rear Speaker Accents 13Rear Turn Signal Bars/Brackets 50, 53, 165Receptacle Kits 200Reflector Covers 133Regulator Covers 132Relay Kits 49Relocation Brackets for Driver Boards 93Relocator Kit for Tour-Pak 21, 193Remote Control 58

Product Description Page #Reservoir Cover 75, 134Retractable Passenger Pegs 8, 105-106Ride Guides 182Rider Headsets 23, 201Riser Bolt Covers 129Risers 80Rocker Box Bolt Covers 143Running Board Extenders 93Run-Turn-Brake Controller/Adapters 39S & S Twin Cam Gear Drive 229Saddle Shields 21, 190-191Saddlebag Accents 13, 157-159 Saddlebag Accessories 13, 19, 155, 184Saddlebag Latch Accents 157Saddlebag Latches 156-157Saddlebag Lid Cover 183Saddlebag Mount Bracket Accents 159Saddlebags 18, 177Saddlebag Quick Release Brackets 19Saddlebag Rail Light Bar 13Saddlebag Filler Panels 158Seat Releases/Knobs 194Shift Arm Accents/Covers 9, 109-110, 112Shift Levers 113-114Shift Linkages 108-112Shift Pegs 83-88Shift Spline Cover 114Shifter Ball Joints 112Shirts 210Silver Bullet Mounts & Components 47-49, 102, 170Silver Bullets 46-48Sissy Bars/Mounts 195-197Smoke Lenses 52Solenoid Cover 151Spark Plug Covers 12, 143 Spark Plugs 229Speaker Grills 11, 118-119Speakers 71, 175Speedometer Drive Covers 129Speedometer Trim/Visors 118, 120Splined Male Mount 92Spoiler for Tour-Pak 12Spot Lamps & Driving Lights 41-44Starter Connector Plug Cover 151Starter Cover 151Stereo Trim 11Stinger Trap Door 222Stirrups (Heelrests)

Extenders 91For H-D Custom Pegs 90Inserts for Heel Rest 89ISO 89-90, 97Liberator 84Mount for Non-Küryakyn Peg 90Pilot 87Replacement Parts 89Retro 87Stiletto 86Switchblade 90

Product Description Page #Widow 84

Streamliner, Hyper 222Strut Lights 44Swingarm Accents 13Swingarm Covers 161-162, 164Swingarm Pivot Covers 162-163Switch (Double Rocker) 49Switch Housing Covers 74Switch Panel Accent 118Tachs 68Taillight Bulbs 54-55Taillight Lenses 51Taillight Visors/Covers 164Taillights 36, 38Tank Bag with Speaker 180Tank Tab Trim 123Tappet Block Accents/Covers 140-141Thermometers 68Thread Locker 212Throttle Assist 66-67Throttle Bodies 230Throttle Body Support Bracket Cover 216Throttle Boss 4, 63, 66Throttle Cable Covers 74Throttle Rocker 67Throttle Servo Motor Cover 216Thumbnail Button Extenders 75Tie Down Brackets 23, 207Tie Down Straps 206Timing (Point) Covers 140-141Timing Hole Cover 146Tire Pressure Gauge 211Tombstone Taillights 53Tools 211Top End Gaskets 229Torque Cones 233Tour-Pak

Accents 155Bag 15, 184Lid Organizer 184Lightbars 12, 155Relocator 21, 193Spoiler 12

Tour-Tech Cruise Pegs & Mounts 96Trailer Ball Cover 201Trailer Hitch & Receptacle 23, 200Trailer Hitch Rack 201Trailer Wiring Harness 200Transmission Dipsticks 150

Transmission Shrouds 144-145, 148-149

Trap Doors for Hypercharger 220-221Travel Bags & Accessories 172-184Travel Guides 182Travel Mug 69, 192, 210TTS MasterTune 231Turbulators 224Turn Signal

Adapter Studs 49Brackets, Bars (Rear) 14, 48, 50, 53, 165


7. Exhaust systems are warranted for manufacturing defects only. There is no warranty on exhaust pipes & mufflers with regard to any discoloration. Discoloration or “blueing” is caused by tuning characteristics, exhaust timing, carburetor jetting, overheating, etc. & is not caused by defective manufacturing.

8. Küryakyn makes no warranty of any kind in regard to other manufacturer’s products distributed by Küryakyn. Küryakyn will pass on all warranties made by the manufacturer & where possible, will expedite the claim on behalf of the customer, but ultimately, responsibility for disposition of the warranty claim lies with the manufacturer.

Return Policy: Merchandise may be returned up to one year from the date of purchase. Returns must be processed through original seller. Returned merchandise for any other reason other than warranty claims must be in like new condition & subject to a 20% restocking fee. All returns are subject to inspection for determination of full or partial credit. Any returned part that shows evidence of being used or installed contrary to manufacturer’s instructions, &/or subjected to improper handling, packaging or return shipping by the customer, will not be eligible for exchange, refund or warranty consideration. All returned electrical items will be inspected & tested. If electrical item is deemed functional, no credit will be issued & item will be returned. All sales are final on discontinued or closeout merchandise.

Return Instructions: Contact one of our prompt, courteous Customer Service representatives toll free at 877-370-3604. Be sure to have the following information available when you call: _Name_Part number(s) to be returned_Copy of original invoice_Reason for return

1. Obtain R.M.A. number which shall remain active & valid for 60 days. (Important: Issuance of R.M.A. does not represent an authorized credit.)

2. Carefully package merchandise to avoid damage during shipment. Depending on its condition, original packaging may not be sufficient.

3. Ship only those items for which the R.M.A. has been issued.

4. Write the R.M.A. number prominently on the outside of package.

5. Ship package freight PREPAID (C.O.D.s will not be accepted) to:

Payment Terms: We accept Visa, MasterCard, American Express or Discover. International customers must pay any customs charges, VAT, taxes, or other costs, in addition to the shipping charge. For customers in Indonesia or Singapore or Nigeria we require prepayment by wire transfer only.

Prices: Prices are subject to change without notice. We try to avoid mid-year price changes, but reserve the right to adjust prices if our costs increase. Additionally, in the event a mistake was made in our price list or catalog, we reserve the right to bill at the prevailing prices in place at the time of shipment.

Freight: Freight is F.O.B. Somerset, WI

Backorders: For your convenience, backorders are tracked electronically & will be shipped automatically. If a backorder is over 90 days, we will ship, pending approval.

Damaged Shipments: Should a shipment arrive in damaged cartons, sign only for the packages received & be sure to indicate that they arrived damaged. Keep the cartons & inspect the merchandise for damage or shortages. Notify us immediately if necessary.

Shortages/Overages: Should you receive an order with a missing item or an extra item is included (but not invoiced), please contact our customer service department. All shortages or overages must be reported within 5 days of receipt of the goods. Please have the invoice number & the number of packages received available when you call.

Limited Warranty: Küryakyn warrants that any Küryakyn products sold hereunder, shall be free of defects in materials & workmanship for a period of one (1) year from the date of purchase by the consumer excepting the following provisions:

1. Küryakyn shall have no obligation in the event the customer is unable to provide a receipt showing the date the customer purchased the product(s).

2. The product must be properly installed, maintained & operated under normal conditions.

3. Küryakyn makes no warranty, expressed or implied, with respect to any gold plated products.

4. Küryakyn shall not be liable for any consequential & incidental damages, including labor & paint, resulting from failure of a Küryakyn product, failure to deliver, delay in delivery, delivery in nonconforming condition, or for any breech of contract or duty between Küryakyn & a customer.

5. Küryakyn products are often intended for use in specific applications. Küryakyn makes no warranty if a Küryakyn product is used in applications other than intended.

6. Küryakyn electrical products are warranted for one (1) year from the date of purchase by the consumer. L.E.D.’s contained in components of Küryakyn products will be warranted for defects in materials & workmanship for 3 years from the date of purchase where as all other components shall be warranted for one (1) year. This includes, but is not limited to; control modules, wiring, chrome & other components.

Küryakyn454 County Road VV Somerset, WI 54025

Küryakyn, Wild Things, Wild Things Performance, Widow & ISO are registered trademarks of Küryakyn Holdings, Somerset WI, U.S.A.

Liberator, Flame, Zombie, Illiana, Chauvinist, Scythe, AirMaster, Pilot, Stiletto, Kaiser, Retro, Tour-Tech, Magnum, The Chrome Mustache, Ergo, Ergo-Guard, Transformer, Dragon Wing, Sound of Chrome, Snap-N-Go, Hypercharger, Corsair, Scarab, Crusher & Beast Ovals are trademarks of Küryakyn Holdings, Somerset WI, U.S.A.

Bar & Shield Logo, Deluxe, Deuce, Dyna, Dyna Glide, Electra Glide, Evolution, Fat Bob, Fat Boy, Harley, Harley-Davidson, HD, H-D, Heritage Softail, Heritage Springer, H.O.G., HOG, Hugger, Low Rider, Night Rod, Night Train, Profile, Road Glide, Road King, Rocker, Screamin’ Eagle, Shovelhead, Softail, Sportster, Springer, Street Bob, Street Glide, Street Rod, Super Glide, Tour-Pak, T-Sport, Twin Cam, Twin Cam 88, Twin Cam 88B, Twin Cam 96, Twin Cam 96B, Twin Cam 103, Twin Cam 103B, Twin Cam 110, Twin Cam 110B, Ultra Classic, V-Rod, VRSC, & Wide Glide are registered trademarks of the Harley-Davidson Motor Company, Inc., Milwaukee WI, U.S.A.

Harley-Davidson® Model designations are used in this catalog for reference only & include: FL, FLH, FLST, FLSTC, FLSTF, FLSTN, FLSTS, FLHR, FLHRI, FLHT, FLHTC, FLHTCI, FLHTCU, FLHTCUI, FLT, FLTRI, FX, FXD, FXDL, FXDWG, FXDX, FXDXT, FXLR, FXR, FXRS, FXRS-SP, FXRT, FXST, FXSTB, FXSTC, FXSTD, FXSTS, FXSTSB, FXWG, H-D, XL, XLH, XL 883C, XL 883R, XL 1200C, & XL 1200S.

COPYRIGHT 2010 KÜRYAKYN® USA ALL RIGHTS RESERVED

Product Description Page #Bulbs 54-55Button Extenders 75Controllers 39Kits 51, 53L.E.D. Conversions/Inserts 38, 52Lenses 52Mirrors 77-79Panacea 37Relocation Mounts 19Strut Lights 44

Unicea 37Underseat Peg Mounts 106Universal Drink Holders 69Universal Helmet Lock 210Universal Joints 112Valve Springs, high lift 229Valve Stem Caps/Covers 210Visors, Speedometer 120Visors, Silver Bullets 48Visors, Taillight 164Volt Meter 67Wheel Chocks 207-208White Diamond Metals Polish 212Wild Things Product Line 225Wind Deflectors 21, 190-191Windshield Mounted Bag 16Windshield Mounted Mirrors 79Windshield Pod 183Windshield Trim 10, 125-126Windshields 20-21, 188-189Windshield Mounting Kits 20Wire Wrap/Loom (Round-It) 212Wiring Harness, Trailer 200Wixtech 54Xsighting Lighting 40X-Tension 96


IN

DE

X

ALSO AVAILABLE:PEGS PG 83WINDSHIELD PG 188BRAKE PEDAL PADS PG 83SPEAKER GRILLS PG 118PASSENGER BOARD COVERS PG 156DRIVER FLOORBOARD COVERS PG 94PASSENGER FLOORBOARD INSERTS PG 94

FLAMETM SHIFT LINKAGE & SHIFT ARM COVER PG 109

ISO®-FLAME GRIPS PG 63

FLAMETM FENDER TIP LENS GRILLS - PG 9

FLAMIN’ SWITCHBLADE PEGS - PG 83

FLAMETM SADDLEBAG ACCENTS - PG 157


Hi-Five Mach 2 Air Cleaner

pg 217

Crusher Mufflers pg 232

TTS Master Tune pg 231

+

+

RUN-TURN-BRAKE SPOILER

pg 12

COLOSSUS REAR TRIM

pg 155

LOWER LIGHTED TRIM

pg 155

BEAST OVAL MUFFLERS pg 232

SADDLEBAG ACCENTS pg 158-159

AERIONTM LIGHTBARS pg 13

TRAILER HITCH pg 200

FENDER TIP LENS GRILL

pg 14

USE "KH'10_01_Inside-FrontSpread.indd" FILE FOR IFC ART.

••

$5.00

PHONE 715.247.2184 | FAX 715.247.5007 | [email protected]

Documents

Chrome Catalog