• Straight, Angle Head & Double-Cutting models available

• Versatile

• Fast & safe

• Fits tight spaces

• Precision, re-sharpenable chisel cuts only the nut

AutoSPLITTERNut Splitter

8

It’s time to streamline.

Still using a hammer and chisel to remove corroded nuts? Sick and tired of costly and limited options offered by other nut splitters? It’s time to streamline with FASTORQ AutoSPLITTERs.

Versatile and efficient, AutoSPLITTERs cut more nut sizes per model than competing nut splitters and come with adapters that cut multiple nut shapes. Incredibly, they do all of this without sacrificing speed, strength and safety. Now that’s savings!

It’s important to find a nut splitter that is not only strong and fast but cuts multiple nuts with as few cylinders and heads as possible. You find this with FASTORQ AutoSPLITTERs. Competing nut splitters require up to 17 models to cover the same size range the AutoSPLITTER does in 9 models (and even as few as 4 models if the Duo and Trio packages are purchased)!

Cut through the largest frozen nuts in just seconds with virtually no risk of injury. Simply slip the AutoSPLITTER head over the nut and apply hydraulic pressure. One cut frees the nut for

turning, and two cuts, 180 degrees apart, cleanly breaks the nut away.

FASTORQ’s nut splitters work in tight spaces and from several angles thanks to their specially designed heads.

Made with a special metallurgy and hardening process, AutoSPLITTER’s specially designed chisels perform dozens of cuts before resharpening and handle many resharpenings before replacing. Due to its unique compound angle chisel design, the AutoSPLITTER even cuts stainless steel nuts!

All AutoSPLITTERs come with FASTORQ’s No B.S. Lifetime Guarantee and new Warranty Extension Program. See warranty information on page 29 for details.

Straight Head AutoSPLITTER

FASTORQ straight head nut splitters offer versatility with a large cutting range (from 5/8 inch to 6-1/2 inches); cylinders that accept usually two to three heads and adapters that cut round, square, 12-point, huck bolts and uniquely shaped nuts.

The AutoSPLITTER fits on most API and ANSI flanges as well as valve bonnets and BOPs. It cuts especially

hard or non-hex shaped nuts, including 2H (ASTM A 194/2H – Brinell hardness 248-352). Custom-built nut splitters are also available when the need arises.

Angle Head AutoSPLITTER

Looking to get around obstructions or cut on flat surfaces? The angle head nut splitter can’t be beat. With a cutting range from 5/8 inch to 3-7/8 inches, the angle head goes where straight head nut splitters cannot. Avoid frustration and invest in the versatile and innovative Angle Head AutoSPLITTER.

Double-Cut, Angle Head AutoSPLITTER

Some jobs just call for speed. When time matters, double your performance with FASTORQ’s double-cutting nut splitter.

Available in 5/8-inch to 3-3/8-inch cutting range, cutting across the flats just became faster and easier.

The Double-Cut AutoSPLITTER works by eliminating the need to move the nut splitter to a second position 180 degrees from the first to break the nut from the stud! That’s a serious time saving benefit.

8

9

No matter the hardness or condition of the nut, AutoSPLITTERs will remove it quickly every time!

Only FASTORQ has the double-cutting AutoSPLITTER - removing a nut in a single application!

The Angle Head AutoSPLITTER gives you the freedom to work from any direction.

TotalAssuranceGuarantee

1 Year

No B.S.Lifetime

Warranty

TotalAssuranceGuarantee

1-3 Year

TotalAssuranceGuarantee

3 Year