Chemiphase Oilfield Presentation - Donutsdocshare01.docshare.tips/files/18443/184437066.pdf · Chemiphase oxygen scavenger's are used to remove dissolved oxygen from feed water that

Chemiphase LtdIndustrial Oilfield Manufacturing Company

Chemiphase UK +44 (8456) 432900

Tekkon Tr +90 312 446 65 60

Tekkon Iraq +964 750 383 88 91

www.chemiphase.com

www.tekkonpetrochemical.com

www.chemiphase.com

Chemiphase was established in 1991 as a innovative chemical manufacture and during

this time Chemiphase has undergone a number of changes, but our commitment to

providing the highest standard of chemicals at the most competitive prices, has

remained a constant.

All our chemical ranges are formulated by our highly trained and vastly experienced

chemists and are put through rigorous in house testing in our purpose built research

and development laboratory. We subject our chemical ranges to the most stringent of

testing to make sure our customers receive the best products, whilst also satisfying our

need for constant product improvement.

The Chemiphase aim is simple; to produce the best chemical solutions at the most

competitive prices, produced in an environmentally friendly and sustainable way.

Welcome to Chemiphasewww.chemiphase.com

Chemiphase is an innovative expanding company, providing cost effective quality products for today's market.

It is our aim to compound our ability as manufacturers of a comprehensive range to speciality chemical and biological products to Today's Modern Industry.

Our ability to provide complete solutions, whether, chemical, biological or mechanical, put Chemiphase at the forefront of this developing technology. Our previous practical experience in this field equips Chemiphase to rapidly identify the most successful and cost effective forms of treatment, and to provide a complete treatment package and service to our client.

Our research has shown that there is a current and growing trend towards environmentally friendly products and it is in this area that we will emphasise our abilities in this area and promote our product line. It is not a new area for us but one which was established when Chemiphase Ltd. Was formed and it is to our advantage that this growing trend continues.

Chemiphase Mission Statementwww.chemiphase.com

Chemiphase Product Rangewww.chemiphase.com

Chemiphase Oilfield Rangewww.chemiphase.com

Bespoke Chemical Formulationswww.chemiphase.com

Every oilfield and oil well has a unique set of characteristics that determine the type of chemicalapplications that will prove to be effective.

In order that we can ensure the best chemical solution for each oil well, Chemiphase undertake a three tier approach;

1. Initial Site Visit and Testing2. Laboratory Analysis of the Sample3. Product Recommendation4. Dosage Rates for Performance Levels5. Quotation Generated6. Monthly Testing and Product Refinement


Chemiphase have a fully equipped, purpose built laboratory for carrying out oil and chemical testing.

We also have strong links with the local University of Liverpool, where we are granted access to theirChemistry and Biology labs, to conduct test work and long term product analysis.


1. Initial Site Visit and Testing

The initial site visit is undertaken to;

•Identify the nature of the problem(s)•Identify the operational parameters•Identify the goal of a chemical application

The initial site testing involves;

•Chemical base testing•Water testing•Standardised/ repeatable testing (bottle testing/ liquid sparge etc)


2. Laboratory Analysis

The laboratory analysis involves (where possible and if required) testing of the crude oil in ourpurpose built laboratory in the UK.

During this stage multiple chemical formulations, blends and bases are rigorously tested.

This is a key stage in ensuring that the chemical applications applied on site are;

• exceeding the goals defined at the site visit stage• Offering the most cost effective solution


3. Monthly Testing and Product Refinement

At Chemiphase we believe an effective after care program is essential for optimising not only theefficiency and productivity of the chemical application, but also the well itself.

We achieve this in three ways;

1. By visiting site and analysing the chemical applications2. Though onsite product refinement3. Research and development


Typical Procedures for a New Chemical Treatment

Stage 1

First customer contact Understanding the issue Site Visit+Testing

Stage 2

Product Formulation Treatment Proposal Product Field Trial

Stage 3

Chemical Treatment in full site use

Site visit and product refinement Site visit to ensure continued success

•The range is oil soluble product that controls corrosion in oil / water systems.• The range will provide excellent filming properties over a wide pH range band.• The range ensures excellent corrosion protection against acidic species.

• The range provides a cost effective corrosion treatment for systems which have varying processing conditions and metallurgy.

Product Product Description Chemical Description

CP 3161 Corrosion Inhibitor & Neutraliser Fatty acids, fatty amines & a volatile amine

CP 3162 Corrosion Inhibitor & Neutraliser Blend of Polymeric Alkoxylates

CP 3163 Corrosion & Neutraliser Fatty acids, Fatty amines & monoethanolamine

CP 9308 Scale / Corrosion / Biocide Programme Amino-tris, Phosphonium Salt & Carboxilic Acid

CP 3166 General Corrosion Inhibitor Blend of Polymeric Alkoxylates

CP 3175 Well Protector while Drilling Blend of Polymeric Alkoxylates

CP 3167 Corrosion & Biocide Quartenary ammonium compounds

CP 3168 Corrosion / Biocide / Oxygen Well Stimulant Bisulphite & Fatty quarternary ammonium compounds

CP 4504 Organic Deposit RemoverBlend of Anionic & Non Anionic surfactants. Hydrocarbon based

CP 3220 Well Casing Corrosion InhibitorFatty acids, fatty amines & a volatile amine

Oilfield Corrosion Inhibitor’s www.chemiphase.com


CP2143 Demulsifier & Corrosion Inhibitor Alkoxylates

CP 2144 Crude Oil Demulsifier Blend of Polymeric Alkoxylates

CP 2145D Crude Oil Demulsifier Blend of Polymeric Alkoxylates

CP 2147D Crude Oil Demulsifier Blend of Polymeric Alkoxylates



CP 2802 De-Oiler Blend of Cationic High Mwt Polymers

CP 2807 De-Oiler Blend of Strong Cationic High Mwt Polymers

CP 2808 De-Oiler & Reverse Demulsifier Blend of Strong Cationic High Mwt Polymers

•Oil soluble product that destabilises water in oil emulsions•Effective on a range of crude oils around Europe, North & South America's and the Middle East

•Effective at breaking natural emulsions and emulsions formed as a result of chemical additives•Can be employed in many oilfield systems

Demulsifier’s & Emulsifier’swww.chemiphase.com

An oil well is a complex ecosystem that contains a number of bacterial and microbacterial components that can impact oil production.Two important bacterial types are Sulphate Reducing Bacteria and Nitrate Reducing Bacteria.

Many bacteria reduce small amounts of sulphates in order to synthesize sculpture containing cell components; this is known asassimilatory sulfate reduction. By contrast, the sulfate-reducing bacteria (SRB) considered here reduce sulfate in large amounts toobtain energy and expel the resulting sulfide as waste; this is known as dissimilatory sulfate reduction. They use sulfate as the terminalelectron acceptor of their electron transport chain and produce hydrogen sulphide (H2S) as the waste gas product. Most sulfate-reducing bacteria can also reduce other oxidized inorganic sulfur compounds, such as sulfite, thiosulfite, or elemental sulfur (which isalso reduced to sulfide as hydrogen sulphide).

The Chemiphase treatment involves the introduction, stimulation and cultivation of the NRB’s in order to effectively manageH2S problems.

Firstly the product introduces and stimulates the growth of NRBs. In essence, the microbial community is changed from one that isabundant with SRBs to one that is abundant with NRB’s. Secondly, cultivation of the NRBS through a supply of suitable, specificnutrients enable the NR-SOB’s to directly oxidize H2S, meaning a significant decrease in the levels of hydrogen sulphide present in thewell and thus reduction in the issues which accompany high H2S levels.

Product Name Product Description Product Code

CWS 1122 Biological SRB Treatment CWS 1122-1000

Environment Treatment Process

Control SRB

www.chemiphase.com


CP 1990 H2S Scavenger Blend of Stable Aldehydes

CP 1991 H2S Scavenger Blend of Stabilised Chlorite Ion's

CP 1991E H2S Scavenger Blend of Stabilised Chlorite Ion's

CP 1992 H2S Scavenger Blend of Stabilised Bisulphite Ion's

Benefits of the h2s Scavenger's•Fast acting H2S Scavenger

•Effective on well fluids, crude oil, oily water and water systems•Rapid removal of Hydrogen sulphide

Chemiphase manufactures a wide range of Hydrogen Sulphide Scavenger's which are fast acting hydrogensulphide scavenger for hydrogen sulphide contamination of well fluids, crude oil, oily water and water systems.

This is determined from on site analysis of crude, H2S Scavenger testing on site and then fully re-checked back inthe laboratory to ensure that our product we recommend is the best possible fit. Once a product has been

recommended we offer on-site technical assistance for the product dosage rates and application points. This on-site technical service will continue to ensure that the product remains the best solution as the oilfield changes overthe years.

Oilfield H2S Scavenger’swww.chemiphase.com

Our proven technology for increasing oil well yields

MEOR is a revolutionary tertiary oil recovery program, engineered to provide fast and comprehensiveresults on underperforming well sites or wells that have ceased to be financially viable.

Why do we need MEOR - a Tertiary Recovery Technique

Peak oil, the time at which oil production reaches its maximum point and begins to decline, is estimated at adate at between 2020 and 2030. This figure is based on the current production rates, but also the currentproduction techniques.

Primary and secondary oil recovery techniques yield extraction rates of between 15 and 50% of the wellstotal reserve. This means that, conservatively, the same amount of oil that has been extracted remainsuntapped once the well ceases to be viable.

MEOR represents an effective tertiary recover technique that will allow the previously unobtainable 50- 85%of a well reserve, to be extracted.

• Secrete bio-surfactants and bio- polymers that lower the surface interfacial tension of the water,allowing for a more comprehensive oil water split.

• Restore the initial gas drive to the well. Increasing the gas drive through respiration and fermentationwill allow for increased oil lift as well as reduced oil viscosity.

• Metabolize carbon atoms from the interior of an alkaline chain, reducing viscosity of the substance tobe pumped, with no apparent degradation of the aromatic ring structure.

• Form biofilms which act to selectively plug porous pathways and actively lift oil attached to

• rock structures out compete unwanted bacterial species which promote unfavourable well

• conditions.

Enhanced Oil Recovery Techniquewww.chemiphase.com


CP 3167 Corrosion & Biocide Quarternary ammonium compounds

CP 3168 Corrosion & Biocide & Oxygen Well Stimulation

Treatment

Bisulphite & Fatty quartenary ammonium

compounds

CP 4504 Corrosion & Biocide & Oxygen Well Stimulation Treatment Blend of Non Ionic and Ionic Surfactants.

CP 4506 Corrosion & Biocide & Oxygen Well Stimulation Treatment Blend of Non Ionic & Anionic

•reduction in operating efficiency•increased flow resistance

•blockages•pipe and tank deterioration and corrosion

The Oilfield Biocide Range has been proven to be effective on a range of oil and gas sites locatedaround the world and has shown to reduce the impact of biofilm formation and bacterial growth.

Oilfield Biocide Rangewww.chemiphase.com


CP 1995 Oxygen Scavenger Aqueous solution of Ammonium Bisulphite

CP 9010 Oxygen Scavenger Tannin Solution

Chemiphase oxygen scavenger's are used to remove dissolved oxygen from feed water that is used for water injection systems and hydrostatic tests. Removal of oxygen from the water will control oxygen pitting corrosion. Our products are highly concentrated meaning removal will take place very rapidly providing good mixing takes place. Our range of oxygen scavenger's do not react with oxygen in the air.

•Removes dissolved oxygen from feed water•Controls oxygen pitting corrosion

•Highly concentrated•Rapid removal

Oxygen Scavenger’swww.chemiphase.com


CP 4813 Scale Buster Amino-tris, Alkyl Phenol Ethoxylates

CP 4815 Scale Buster Amino-tris, Polyacrilic Homopolymer & Organic Acids

CP 4816 Scale Buster / Dispersant Amino-tris, Polyacrilic Acid Polymers

CP 4818 Scale Buster Amino-tris, Polyacrilic Homopolymer & Organic Acids

CP 7620 Scale Inhibitor - Carbonate/Sulphate Polyacrylate & Diethylenetriamine PMPA

CP 7621 Scale Inhibitor - Carbonate/Sulphate Blend of water soluble polymers

Chemiphase will provide a comprehensive range of scale inhibitors to prevent mineral scale deposits such as calcium carbonate, calcium sulphate, barium sulphate, iron sulphide. These products can be custom designed for a given system and either continually dosed or squeeze/batch treated dependant on the specific field problem from reservoir through to pipe discharge point. Treatment designs are specifically tailored per application.

• Inhibits the formation of carbonate and sulphate scales• Inhibits contains a corrosion inhibitor for added value.

• Does not contain any phosphorus.

Oilfield Scale Managementwww.chemiphase.com

Wax & Paraffin Preventionwww.chemiphase.com

Chemiphase manufacture a wide range of wax, paraffin & asphaltene inhibitors for oilfield production.Every oilfield is as unique as its locations differ, for this reason we have developed a wide range of waxinhibitors which maximise the results possible.


AO 1001 One Drum Treatment - Concentrate Highly concentrated blend of surfactants

CP 4806 Wax Prevention Agent Blend of Nonionic Surfactants

CP 4806B Wax Dispersant Alkyl Phenol, Ethoxylate, Xylene Solution

CP 4807 Wax Inhibitor Blend of Nonionic Surfactants

CP 4808 Paraffin Dispersant Blend of Surfactants

CP 4809 Paraffin Dispersant Blend of Surfactants

CP 4822 Wax Inhibitor Several Surfactants in Aromatic Solvent

CP 4850 Wax Crystal Modifier Blend of Pour Point Additives

CP 4851 Wax Crystal Modifier Blend of Pour Point Additives


Analysing the chemical applications

Chemiphase conduct onsite analysis and performance reviews on all the chemical applications we place onsite. This involves;

• Reviewing the issues faced to ensure the problem has not changed• Reviewing the operational procedures to ensure any changes have not

compromised the chemical treatment• Reviewing production to ensure any changes to oil or water production has not

impacted on the chemical treatment• Is the chemical treatment meeting its GOAL


Onsite Product Refinement

The onsite reviews allow us to make immediate refinements to the dosing rate of the chemicals applied on site. Changes to the dosing rates allows us to;

• Maximise the chemical products effectiveness• Maximise the wells potential to produce profitable oil• Reduce well downtime• Keep the chemical costs to a minimum

Due to the changing nature of an oil well and its production, constant monitoring is essential in order to maximise oil production and optimise cost effectiveness of chemical applications.

We will always advise the lowest dosage rates that are required to meet the production goals.


Research and Development

At Chemiphase we are a forward thinking, environmentally aware company. All our activities are geared towards improvements that will benefit both the customer and the environment.

We are constantly striving to find new and innovative ways to tackle long standing issues in the oil industry as well as addressing potential future problems.

Our chemists work tirelessly to find new approaches to improving oil production, once they have established an idea, they rigorously test the products both in the laboratory and in the field.

Once the chemicals arrive onsite, you can be sure they represent the cutting edge of oilfield chemical treatments and will add real value to the production and operation of the oil field.

Chemiphase- Advanced Chemistry

Chemiphase Contact Informationwww.chemiphase.com

Many thanks for your time and we look forward to any questions you would like to ask. If in the future you require in depth information or have any questions please see our contact details for the company representatives you have met today.

Chemiphase Site Representive’s

Managing Director – Clive WigginsTel : (+44) 07968035440 Email : [email protected]

Director – Ben WigginsTel : (+44) 01704 894808 Email : [email protected]

International Sales Manager – Daniel HitchlockTel : (+44) 08456 432900Email : [email protected]

Tekkon Contact Informationwww.chemiphase.com

Burak DoganIraq Country RepresentativeTel: +964 750 198 83 28 Email: [email protected]

Muhammet Akkus

Marketing ManagerTr Tel: +90 533 471 44 36Iraq Tel: +964 750 248 5854 Email: [email protected]

Can Atalay

Business DevelopmentTr Tel: +90 555 291 00 12Iraq Tel: +964 750 383 88 91 Email: [email protected]

Iraq Address:

Tekkon Petrochemical Services Co Ltd., 100th Street, Empire Royal Apartments, Apt. A12/4 Erbil, Iraq

Tel: +964 750 198 83 28

Turkey Address:

Tekkon Petrokimya Servis ve Ticaret Ltd. Sti., Nenehatun Cad. No 84/9 G.O.P. 06700 Ankara / TurkeyTel: +90 312 446 65 60

Documents

Chemiphase Oilfield Presentation - Donutsdocshare01.docshare.tips/files/18443/184437066.pdf · Chemiphase oxygen scavenger's are used to remove dissolved oxygen from feed water that