CHEMICALS

Phone (815)316-9080•Fax (815)316-9081All quantities are single; BU’s are packages of 10 Unless otherwise noted.

Che

m

44

AEROSOLS

Formulating the FutureGC Electronics has been the primary supplier of electronics to the electrical and electronic industry since 1930. In 1997, GCupgraded its technology base to include the new environmental laws. GC has come up with a starting line-up of contact cleaners tocomply with these laws; Big Bath, and Big Bath ISO. Big Bath ISO is a new contact cleaner that is non-ozone depleting and can besold to anyone. Plus, it contains no CFC's or HCFCS and is safe on all plastics.GC offers a complete line of chemicals for use by electronics, electrical and industrial users. In addition to offering the most up-to-date line of aerosols, GC also supplies hard-to-find non-aerosols. GC also offers a broad range of adhesives, heat sink compounds,lubricants and conformal coatings.

Air Jet®

Air Jet is formulated for the dusting and cleaning ofcomponents and equipment. Air Jet contains noflammable additives. This high pressure productis used for blowing dust, dirt and residue out ofhard to reach places without scratching. Air Jet isan excellent product for both home and office use.Applications: Computers, keyboards, printers, faxmachines, audio equipment, video equipment,typewriters.Air Jet contains no ozone depleting chemicals.Anti static formulation minimizes the risk ofelectrostatic damage to sensitive components.

Part No. 19-8508 8 oz. Aerosol

Part No. 19-8475-10 10 oz. AerosolPart No. 19-8475 12 oz. Aerosol

Part No. 19-8475-SF 12 oz. Anti-Static Aerosol

Freeze MistFreeze Mist is a refrigerant spray used to locatethermal intermittents in electronic componentssuch as capacitors, resistors and semi-conductors.Great for removing chewing gum from fabrics,freezing adhesives for easy removal, protectingheat sensitive components during soldering or forthermal fitting metal parts. The flow controltrigger nozzle enables the user to apply theproduct with pinpoint accuracy and reduceproduct usage.Applications: Avionics, electronic equipment, computers.Freeze Mist contains no ozone depletingchemicals. The anti static formulation minimizesthe risk of electrostatic damage to sensitivecomponents.

Part No. 19-8410-10 10 oz. Aerosol

Part No. 19-8410 12 oz. AerosolPart No. 19-8410-SF 12 oz. Anti-Static Aerosol

Isopropyl Alcohol (Anhydrous)%75 VOC ForumulaDoes an excellent job of dissolving and removing oxides from recording heads,also an excellent degreaser. Leaves no residue. This is not an aerosol, but anaerosol-style can with a snap on top. Suggested for use with swabs, clean cloth,or by immersion or trigger sprayer.

Part No. 10-1507-A 16 fl. oz.

Part No. 10-1507-AG 1 gal.

Part No. 10-1507-A6G 6 gal.

NON-AEROSOL CLEANERS

CHEMICALS

Phone (815)316-9080•Fax (815)316-9081All quantities are single; BU’s are packages of 10 Unless otherwise noted.

Che

m

54

GC HEAT SINK COMPOUNDSMeets Your Great DemandsThe technology of today's electronic devices has increased current handling capacity. The additional heat buildup places greatdemands on heat sink materials. GC offers a complete line of heat sink compounds to meet these demands. The HTC product offersover twice the thermal conductivity of conventional products and is available in silicone and non-silicone versions. The water-solubleheat sink grease offers excellent thermal conductivity and easy cleanup. The standard silicone and non-silicone products continue tomeet most requirements. See chart for typical properties.

Silicone (Z9)Industry standard zinc oxide filled silicone heatsink grease for most applications. Will not soften atelevated temperatures or dry out or harden. MeetsMil. Spec. C-47113.

Part No. 10-8109 1 fl. oz. Tube

Part No. 10-8108 6.5 gms. Tube

Part No. 10-8106 1 lb. Can

HTC (High Thermal Conductivity)Higher thermal conductivity formula has all thesame benefits of conventional heat sink greases,plus is exceptionally stable in high humidityapplications.

Part No. 10-8135 Silicone Based, 1 oz. Syringe

Part No. 10-8135-0001 Silicone Based, 1lb. Jar

Type 44 Non-SiliconeCompounded with 100% synthetic basestocks. Features excellent heat transferefficiency, thermal stability, high flowrate, no separation, bleed or migrationtypical of silicone based greases. MIL-C-47113 Type 2.

Part No. 10-8118 1/2 fl. oz. Jar

Part No. 10-8120 1 fl. oz. Tube

Part No. 10-8126 1 lb. Jar

Heat Sink Properties (Typical)10-8106 10-811810-8108 10-8120 10-8109 10-8126 10-8135 10-8132

Test Standard Standard H.T.C. Water Soluble Tests Methods Silicone Non-Silicone Silicone Non-Silicone

Appearance Visual White Paste White Paste Off-White Paste White Paste

Consistency Penetration ASTM 290 260 250-350 250-35060 Strokes @ 77˚F D-217

Specific Gravity ASTMD-70 2.4 2.5 2.7 2.8

Bleed, 24 Hrs. %Wt. 150°C FTM-321 1.00200°C PTM-791.321 1/10% <0.5 0.3

Evaporation, 24 Hr. %Wt.150°C FTM-321 1.00200°C PTM-791.321-3M 3/10% 0.1 0.3

Thermal ConductivityCAL/SEC cm ºK Modified DSC 1.8 x 10-3 1.8 x 10-3

CAL/SEC cm ºC Hot Wire Method 4.35 x 10-3 2.82 x 10-3

Dielectric Strength ASTM0.050” gap volts/mil. D-149 400 420 343 265

Dielectric Constant ASTM1000 Hz D-150 4.9 4.5 5.14

Dissipation Factor50 Hz, Ohm-cm ASTM 0.005 0.0029 0.0022

1,000 Hz, Ohm-cm D-150 0.001 0.0029 0.0031

Volume Resistivity ASTM Ohm-cm D-257 2 x 1015 2 x 1015 1 x 1015 3.36 x 1013

Operating Range -67°F to 400°F -22°F to 390°F -55°C to 205°C -40°C to 150°C

Arc Resistance, RT Unit: SEC ASTM D-495 77 130 250

Shelf Life Months 60 60 60

For the latest information–www.gcelectronics.comAll quantities are single; BU’s are packages of 10 Unless otherwise noted.

Chem

57

CHEMICALSSOLDER FLUX

Soldering PasteA strong �ux for soldering sheet metal parts,bus wires to steel chassis, tinning andcleaning of soldering iron tips, etc. Notrecommended for electronic or printedcircuit soldering.

Part No. 10-1207 2 �. oz. Bottle

Liquid Solder FluxCompletely non-corrosive liquid solder �uxconsisting of a solution of special rosin inalcohol. Contains no traces of acids orchlorides and is completely safe to use on eventhe most delicate electronic equipment. Will work also with Lead Free solder.Part No. 10-4202 2 �. oz. BottlePart No. 10-4216 16 �. oz. Bottle

Solder FluxA �ux for all metals, as e�ective as acid orchloride types but non-corrosive. Solders evenhard-to-solder metals such as aluminum, zinc-based alloys, steel, etc. Ideal for soldering busand ground wires to aluminum and steelchassis, to hermetically seal lids to metal cases,for pot-tinning of copper and brass parts, etc.Not recommended for electronic wiring,including printed circuits.

Part No. 10-200 2 �. oz. Bottle

Water Removable Soldering PasteLubricates, cleans, �uxes and rinses away.

Part No. 10-202 2 �. oz. Bottle

SPECIALTY CHEMICALS

High Voltage PuttySilicone rubber compound with excellentinsulating characteristics. It will never harden,will not shrink and has good adhesive properties.Provides a corona and arc suppressing coating inhigh voltage systems. Especially useful for coatingsharp points, edges or corners. Also useful to formgaskets and seals where a putty-like,non-hardening property is desired. (Approx. 550Volts/MIL Di-electric strength).

Part No. 10-8880 1-1/4 oz.(1”wide x 1/4” thick x approx.18” in length)

Part No. 10-8882 1/2 lb . tub

Flux Remover and CleanerConvenient, fast and easy to use. Removes alltypes of organic �ux. Pinpoint applicator supplied.Non ODC 75% VOC.

Part No. 22-271-A 16 oz. Aerosol

CHEMICALS

Phone (815)316-9080•Fax (815)316-9081All quantities are single; BU’s are packages of 10 Unless otherwise noted.

Che

m

66

CHEMICAL SPECIFICATION MATRIX (Cont.)

Solder Flux SpecificationsHMIS

Flammability Suggested Solvent Shelf Life DOTPart No. MSDS No. Description Contents Base Color Rating Months* Shipping

10-4202 112 Liquid Solder 2 fl. oz bottle Rosin & Clear to 3 Alcohol DriedWarm Water @ 125-150ºF

36 ORM-D10-4216 Flux 16 fl. oz can Alcohol Lt. Straw

10-200 142 Solder Flux 2 fl. oz bottle Monoethanolomine Clear to 0 None 42 ORM-DDrethandamine Lt. Yellow

10-1207 123 Soldering 2 fl. oz bottle Petrolatum Amber 0 None 36 Not Paste Regulated

10-202 113 Water Soluble 2 fl. oz bottle Rosin Milky White 1 None 42 ORM-D

Potting Compound Specifications 0 to 120ºF Application THMIS

FlammabilityTemperature

Curing/ Suggested Shelf LifePart No. MSDS No. Description Contents Base Color Rating Drying Time Solvent Months* DOT Shipping

19-823 GC Potting Epoxy 8 oz kit Bisphenol-A (Resin) Black 1 -40 to 300°F410V/mil

24 Hrs @77 F None 12 Not 19-824 120 500 gram kit Polyimide Blend 1 Hr @ 150 F Regulated19-824-2G 2 gal kit (Hardener) 10 min @225 F

19-160 276 GC Electronic Grade 10.2 Caulk Tube Organopolysiloxane Clear 1 Open Cup 24 hrs @77ºFSkin Over 40 min.

Xylol, Toluol, 12 NotPotting Silicone 2 Closed Cup Mineral Spirits Regulated

19-161 277 Thermally 8 oz kit Bisphenol-A Type Black 1 -40 to 300°F400V/mil

24 to 72 hrs @77ºF3 Hr @ 149ºF, 30 min @ 212ºF

None 12 CorrosiveConductive Resin

Potting Epoxy

Solvents SpecificationsHMIS

Flammability Used For Shelf Life DOTPart No. MSDS No. Description Contents Base Color Rating Months* Shipping

10-4102 211 Q Dope Thinner 2 fl. oz. Toluene Clear 3 Polystyrene 42 ORM-D

10-312 102 Radio-TV Cement 2 fl. oz. Acetone Acetate Clear 4 Lacquer Type Cements 42 ORM-D10-320 16 fl. oz.10-321 1 gal. Flammable

Liquid

10-6702 226 Paint Thinner 2 fl. oz. Mineral Spirits Clear 3 Paint and Varnish Base 42 ORM-Dand Toluene

22-209 214 Print Kote Solvent 2 fl. oz. Toluene Clear 3 Silicone 42 ORM-D

Flux Removers SpecificationsHMIS

Flammability Specific Shelf Life DOTPart No. MSDS No. Description Contents Base Color Rating Gravity Months* Shipping

19-229-A 313 Flux Remover and 16 fl oz can Trichloroethylene Clear 1 1.1 48 ORM-D22-271-A Cleaner II 16 oz aerosol & Isopropanol

19-7522-A 310 Static-Free 18 oz aerosol Trichloroethylene Clear 1 1.34 42 ORM-DHigh Strength & IsopropanolFlux Remover

Specialty Products SpecificationsHMIS

FlammabilityTemperature

Shelf Life DOTPart No. MSDS No. Description Contents Base Color Rating Dielectric Strength Months* Shipping

10-8880 207 High Voltage 1 1/4 oz Silicone Rubber Clear 0 36 Not 10-8882 Putty 8 oz Compounds Regulated

10-8602 118 Belt and Drive 2 fl. oz. bottle Alcohol Clear to 3 None 36 ORM-DNon-Slip Lt. Brown

10-8101 206 Silicone 1 fl. oz. Silicone Clear Gel 0 60 Not 10-8102 Compound 1 gal Grease Regulated10-568 1/3 oz.

* Note:Shelf Life is determined by the Date Of Manufacture(DOM) located on the product. If a product has a shelf life of 12 months, a closed container is good for one yearpast the DOM.

452V/mil

Dielectric Strength

-65 to 250°F550V/mil

-40 to 400°F0.1" Gap, 600V/mil615V/mil @ 10 mil

Phone (815)316-9080•Fax (815)316-9081All quantities are single; BU’s are packages of 10 Unless otherwise noted.

Che

m

58

CHEMICALSSPECIALTY CHEMICALS (Cont.)

ACCESSORIES

Squeeze Bottle &Squeeze RiserThese reliable bottles accuratelydispense solvents in the requiredamounts in the proper location. Foruse with GC Bulk Chemicals,wipes and brushes. Can be usedsafely with all GC chemicals. Thesqueeze riser professionally dis-penses chemicals without using anaerosol.

Part No. 19-780 4 oz. Squeeze Bottle

Part No. 19-781 4 oz.Squeeze Riser

GC Touch DispenserStops waste. Dispense only as much fluid as neededfor the job. Saves time and effort. No stopper or capto remove. One-handed touch on the dish dispensesthe required amount of fluid, leaving the other handfree. Prevents contamination. Liquid in bottle staysclean until used. Fluid pumped into dish doesn’t dripback into bottle. Hinged lid protects dish when not inuse. Use with all GC cleaner/degreaser and defluxingsolvents. Not for use with iodine, acids or bases.

Part No. 19-764 4 oz. Bottle with Pump

Part No. 19-766 6 oz. Bottle with Pump

Part No. 19-768 8 oz. Bottle with Pump

1oz. Glass BottleGC glass bottle with plastic cap allows safe storagefor when you want to work with smaller quantitiesof oils, contact cleaners, and other liquids.

Part No. 10-285 1 oz. Glass Bottle with Cap

Silicone Dielectric CompoundSoft, inert silicone grease with excellent dielectricproperties. Usable over a wide range oftemperatures. Its consistency is vaseline-like andit is clear translucent in color. It provides anexcellent dielectric coating which excludesmoisture and prevents high voltage arcing.Applicable to components in the high voltagesection of TV receivers. Protects ignition systemsin automobiles and boats, in addition to providingan outstanding corrosion resistant coating onexposed metal surfaces, such as TV antennaterminals as well as general rustproofing. Thiscompound also makes an excellent lubricant forrubber or plastic.

Part No. 10-8101 1 fl. oz. TubeN.S.N. 6850-00-268-7963

Part No. 10-8102 1 gal. Can

Part No. 10-568 1/3 fl. oz. Chem-O-Jector

Belt & Drive Non-SlipPrevents slippage in mechanical or electro-mechanical devices which are driven withcords, belts, pulleys and drives. Restores properfunctions on belts and drive pulleys inturntables, record changers and tape recorders,especially where the rubber parts have hardenedand/or become slick and cause slippage.

Part No. 10-8602 2 fl. oz. Bottle w/ Brush

Part No. 19-780

Part No. 19-781