Upload
reuel
View
53
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Chemical Nomenclature. 1. Binary Ionic Compounds - Type I 2. Binary Ionic Compounds - Type II 3. Ionic Compounds & Polyatomic (Complex) Ions 4. Hydrated Ionic Compounds 5. Binary Covalent Compounds 6. Binary Acids 7. Oxy-Acids. Definitions. - PowerPoint PPT Presentation
Citation preview
Chemical Nomenclature
1. Binary Ionic Compounds - Type I2. Binary Ionic Compounds - Type II3. Ionic Compounds & Polyatomic (Complex) Ions4. Hydrated Ionic Compounds5. Binary Covalent Compounds6. Binary Acids7. Oxy-Acids
Definitions An IONIC COMPOUND consists of a metal
cation bonded to a nonmetal anion. Electrostatic attraction holds them together.
A COVALENT COMPOUND consists of two nonmetal atoms sharing valence electrons.
A BINARY compound is one that is made of just two elements. There can be one of each element such as in NaCl or KF. There can also be several of each element such as Na2O or AlBr3.
Type I Binary Ionic Compounds The metal cations in these compounds have
only ONE possible charge. Na+ Zn2+ Al3+ Ca2+
sodium zinc aluminum calcium
The charges are memorized or predicted using a periodic table!
The cations are bonded to nonmetal anions: O2- N3- F- Br -
oxide nitride fluoride bromide
Notice that simple anions are always named with the suffix “ide”
Predicting Charges on Monatomic IonsPredicting Charges on Monatomic IonsKNOW THESE !!!!KNOW THESE !!!!
+1 +2 -3 -2 -1 0
Cd+2
CATIONCATION + + ANIONANION ---> --->
COMPOUNDCOMPOUND
A neutral compound A neutral compound requiresrequires
equal number of + equal number of + and - charges.and - charges.
COMPOUNDS FORMED FROM IONS
NaNa++ + Cl + Cl- - --> NaCl--> NaCl
Naming Compounds
1. Cation first, then anion
2. Monatomic cation = name of the element Ca2+ = calcium ion
3. Monatomic anion = root + -ide Cl = chloride
CaCl2 = calcium chloride
Binary Ionic Compounds:Binary Ionic Compounds:
Naming Binary Ionic Compounds
Examples:NaCl
ZnI2
Al2O3
Learning Check
Complete the names of the following binary compounds:Na3N sodium ________________
KBr potassium ________________
Al2O3 aluminum ________________
MgS _________________________
Formulas for Binary Ionic Compounds
A binary compound is one made of two different elements. There can be one of each element such as in sodium bromide or potassium iodide. There can also be several of each element such as lithium oxide or aluminum bromide.
Writing FormulasFormula Unit – lowest whole number ratio of ions in an ionic compound
Points to remember about writing the formula from the name
1. The order in a formula is first the cation, then the anion. 2. You must know the charges associated with each cation
and anion. 3. The sum of the positive charge and the sum of the
negative charges MUST add up to zero. 4. You MAY NOT adjust the charges of the cations or
anions to get a total charge of zero. 5. You MAY adjust the subscripts to get a total charge of
zero.
Example #1Suppose you must write the formula for sodium chloride. Write down the Na+ and Cl¯ right next to each other, as in this image:
Move the positive charge (dropping the sign) to the subscript position of the anion:
Move the negative charge (dropping the sign) to the subscript position of the cation:
The result of all this moving is:
Since subscripts of one are not written, but understood to be present, the final answer is:
Example #2 Write the formula for aluminum oxide. Write down the Al3+ and O2¯ right next to each other :
Move the positive charge (dropping the sign) to the subscript position of the
anion:
Move the negative charge (dropping the sign) to the subscript position of the
cation:
The result of all this moving is:
Learning Check
Write the correct formula for the compounds containing the following ions:1. Sodium sulfide a) NaS b) Na2S c) NaS2
2. Aluminum chloride a) AlCl3 b) AlCl c) Al3Cl3. Magnesium nitride a) MgN b) Mg2N3 c) Mg3N2
Solution
1. Na+ S2-
b) Na2S2. Al3+ Cl-
a) AlCl3
3. Mg2+ N3-
c) Mg3N2
Examples: Type I Binary Ionic Compounds
Write the formulas:
•potassium oxide
• zinc chloride
• silver sulfide
• aluminum nitride
• gallium oxide
•calcium iodide
Write the names:
• K3N
• AgI
• ZnBr2
• Al2O3
• Ba3P2
• LiH
Transition Metals
Elements that can have more than one possible charge MUST have a Roman Numeral to indicate the charge on the individual ion.
1+ or 2+ 2+ or 3+Cu+, Cu2+ Fe2+, Fe3+
copper(I) ion iron(II) ion copper (II) ion iron(III) ion
Names of Variable IonsThese elements REQUIRE Roman Numerals because they can have more than one possible charge:anything except Group 1A, 2A, Ag, Zn, Cd, and Al
(You should already know the charges on these!)
Or another way to say it is: Transition metals and the metals in groups 4A and 5A (except Ag, Zn, Cd, and Al) require a Roman Numeral.
FeCl3 (Fe3+) iron (III) chlorideCuCl (Cu+ ) copper (I) chlorideSnF4 (Sn4+) tin (IV) fluoridePbCl2 (Pb2+) lead (II) chloride
Fe2S3 (Fe3+) iron (III) sulfide
Learning Check
Complete the names of the following binary compounds with variable metal ions:
FeBr2 iron (_____) bromide
CuCl copper (_____) chloride
SnO2 ___(_____ ) ______________
Fe2O3 ________________________
Hg2S ________________________
Examples: Type II Binary Ionic Compounds
Write the formulas:
• iron (II) oxide
• copper (II) chloride
• tin (IV) sulfide
• cupric nitride
• nickel (III) oxide
• ferrous iodide
•cobalt (III) selenide
Write the names:
• Fe2O3
• SnS
• NiBr2
•CuS
• Pb3P2
• CuBr
• FeCl3
Formulas of Ionic Compounds
Formulas of ionic compounds are determined from the charges on the ions
atoms ions
–
Na + F : Na+ : F : NaF
sodium + fluorine sodium fluoride formula
Charge balance: 1+ 1- = 0
NONO33--
nitrate ionnitrate ion
NONO22--
nitrite ionnitrite ion
Polyatomic Ions
Polyatomic (Complex) Ions All of the cations and anions so far have been
simple ions - single atoms that have lost or gained electrons.
Complex polyatomic ions may be cations or anions.
examples:
nitrate: NO3- sulfate: SO4
2- hydroxide: OH-
IONIC COMPOUNDSNH4
+
Cl-
ammonium chloride, NHammonium chloride, NH44ClCl
Things to Notice Most complex ions are anions. Ammonium, NH4
+, is the most common complex cation.
Several complex ions form a short series of ions. The ions differ only in the number of oxygen atoms:
perchorate ClO4- sulfate SO4
2-
chlorate ClO3- sulfite SO3
2-
chlorite ClO2-
hypochlorite ClO- nitrate NO3-
nitrite NO2-
If an ion carries a charge like “-2” or “-3”, a series of related ions can be formed by adding hydrogen cations (H+) while still leaving a net charge:
examples:
Sulfide: S2- hydrogen sulfide: HS-
(bisulfide)
Sulfate: SO42- hydrogen sulfate: HSO4
-
(bisulfate)
Carbonate: CO32- hydrogen carbonate: HCO3
-
(bicarbonate)
Phosphate: PO43- hydrogen phosphate: HPO4
2-
dihydrogen phosphate: H2PO4-
Ionic Compounds containing Polyatomic Ions
Writing Formulas Write each ion, cation first. Don’t show
charges in the final formula. Overall charge must equal zero.
If charges cancel, just write symbols. If not, use subscripts to balance charges.
Use parentheses to show more than one of a particular polyatomic ion.
Use Roman numerals to indicate the ion’s charge when needed (stock system)
Learning Check
1. aluminum nitrate a) AlNO3 b) Al(NO)3 c) Al(NO3)3
2. copper(II) nitrate a) CuNO3b) Cu(NO3)2 c) Cu2(NO3)
3. Iron (III) hydroxide a) FeOH b) Fe3OH c) Fe(OH)3
4. Tin(IV) hydroxide a) Sn(OH)4 b) Sn(OH)2 c) Sn4(OH)
Writing formulas with Complex Ionsa) Ammonium chloride
b) Silver sulfate
c) Aluminum hydroxide
d) Calcium phosphate
e) Iron (III) nitrite
f) Copper(II) permanganate
g) Ammonium dichromate
h) Zinc acetate
More Formulas with Complex Ionsa) NaHCO3
b) Ni(HS)2
c) Al(ClO4)3
d) Ba(H2PO4)2
e) Fe2(SO2)3
f) CuHSO4
g) Zn(IO4)2
Mixed Practice!Name the following:1. Na2O
2. CaCO3
3. PbS2
4. Sn3N2
5. Cu3PO4
6. HgF2
Mixed Up… The Other WayWrite the formula:1. Copper (II) chlorate2. Calcium nitride3. Aluminum carbonate4. Potassium bromide5. Barium fluoride6. Cesium hydroxide
Naming Molecular Compounds
CH4 methaneBCl3 boron trichloride
CO2 Carbon dioxide
All are formed from two or more nonmetals.
Ionic compounds generally involve a metal and nonmetal (NaCl)
Binary Covalent Compounds Covalent compounds are made of two NONMETAL
elements sharing valence electrons. There are no ions involved!! Because there are no charges to help us write the
formulas of covalent compounds, prefixes are used to indicate the number of each atom present in the formula.
The first element receives a prefix if the subscript is greater than one. The second element ALWAYS gets a prefix.Change the ending of the second element to -ide. The prefix, “mono”
is never used for the first element in the formula!
Molecular (Covalent) Nomenclaturefor two nonmetals
Prefix System (binary compounds)CO2 is named “carbon dioxide”CO is named “carbon monoxide”N2O is named “dinitrogen monoxide”SO3 is named “sulfur trioxide”
.
PREFIXmono-di-tri-tetra-penta-hexa-hepta-octa-nona-deca-
NUMBER12345678910
Molecular Nomenclature Prefixes
CCl4
N2O
SF6
Molecular Nomenclature: Examples
arsenic trichloride
dinitrogen pentoxide
tetraphosphorus decoxide
More Molecular Examples
Learning Check
Fill in the blanks to complete the following names of covalent compounds.
CO carbon ______oxideCO2 carbon _______________
PCl3 phosphorus _______chloride
CCl4 carbon ________chloride
N2O _____nitrogen _____oxide
Learning Check 1.P2O5 a) phosphorus oxide
b) phosphorus pentoxidec) diphosphorus pentoxide
2.Cl2O7 a) dichlorine heptoxideb) dichlorine oxidec) chlorine heptoxide
3. Cl2 a) chlorineb) dichlorinec) dichloride
Binary Acids A simple definition of an “acid” is a substance which
produces H+ ions in water.
Most acids have hydrogen ions in their formulas.
A binary acid composed of a hydrogen cation bonded to one other element:
HCl HBr H2Shydrochloric acid hydrobromic acid hydrosulfuric acid
Binary acids are always named: hydro____ic acid
Oxy-Acids An acid can also be made of a hydrogen ion bonded to a complex
ion.
Complex ions whose names end in “ate”:
NO3- SO4
2- CO32- PO4
3-
nitric acid: HNO3
sulfuric acid: H2SO4
carbonic acid: H2CO3
phosphoric acid: H3PO4
Can you propose a rule for naming oxy-acids
with complex ions ending in “ate”?
More Oxy-Acids Complex ions ending in “ite”:
NO2- SO3
2- ClO- ClO2-
nitrous acid: HNO2
sulfurous acid:H2SO3
hypochlorous acid: HClO
chlorous acid HClO2
Can you propose a rule for naming oxy-acids
with complex ions ending in “ite”?
Hydrated Ionic Compounds A HYDRATE is an salt that has water molecules
trapped within its crystals. Every hydrate has a certain number of water
molecules associated with each formula unit of the ionic compound. The number of water molecules is indicated by using prefixes.
mono hexadi heptatri octatetra nonapenta deca
CuSO4 · 5 H2O
copper (II) sulfate pentahydrate
MgCO3 ·10 H2O
magnesium carbonate decahydrate
Examples of hydrates: Write the formulas:
copper(II) fluoride tetrahydrate CuF2 ·4 H2O
calcium nitrate trihydrate Ca(NO3)2 ·3 H2O
Write the names:
MgSO4 · 7 H2O magnesium sulfate heptahydrate
FeCl2 · H2O iron (II) chloride monohydrate