-
CHEM-2002SIMULATION LAB SHEET 2Part-APhysical properties of
library components*
*CHEM2002 - Dr. Ahmed Al-Dallal - 2013
-
A gas stream at 40C and 30 kg/cm2 enters a flash drum. The feed
stream composition is as follow:by simulation software calculate
Dew-point pressure at 40CBubble-point pressure at 40CDew-point
temperature at p=30 kg/cm2Bubble-point temperature at p=30
kg/cm2Recommended thermodynamic EOS is Peng-Robinsonlbmole/hr
*
*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013
-
*For the Dew point calculation vapor phase fraction is 1
-
*Create new streamThis stream Bubble point at T=40 is as same as
stream Dew point at T=40 just Vapor phase fraction is different
-
*
-
*
Choose the source stream
-
*
Information was defined from source file by Hysys
-
*
Information was defined from source file by Hysys
-
*For the Bubble point calculation vapor phase fraction is 0
-
*
-
A gas stream at 40C and 30 kg/cm2 enters a flash drum. The feed
stream composition is as follow:by simulation software calculate
Dew-point pressure at 40CBubble-point pressure at 40CDew-point
temperature at p=30 kg/cm2Bubble-point temperature at p=30
kg/cm2Recommended thermodynamic EOS is Peng-Robinson*
*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013
-
*
-
*
-
*
-
*
-
A gas stream at 40C and 30 kg/cm2 enters a flash drum. The feed
stream composition is as follow:by simulation software calculate
Dew-point pressure at 40CBubble-point pressure at 40CDew-point
temperature at p=30 kg/cm2Bubble-point temperature at p=30
kg/cm2Recommended thermodynamic EOS is Peng-Robinson*
*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013
-
*
-
*
-
Part-APhysical Properties of library component*
*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013
-
*To create new caseIt is desired to find physical properties of
Ethylene GlycolComponent formula: C2H6O2
-
*Click Add button to create new component listFirst step is
introducing components to simulation software
-
*when component formula is used, the formula button should be
activated
All these components are same
-
*
-
*Double Click here to see some of EgLYCOL physical
properties
-
*
-
*
-
*
-
*
-
*
-
*More properties can be calculated in simulation environment
-
*
-
*
-
*
-
*
-
Part-BPhysical Properties of Hypothetical component*
*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013
-
IntroductionHYSYS allows you to create non-library
componentsHypothetical components can be pure components mixtures
or solidsYou can also convert library components to hypothetical
components which allow you to modify library values
*
*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013
-
*Add Ethanol from library to the component list then make a
hypothetical component with normal boiling point=78.25C and
density= 787.41 with following structure CH3CH2OH. Compare
calculated properties by HYSYS for these two materials.Choose
UNIQUAC as thermodynamic package
-
*
-
*
-
*
-
*
-
*
-
*
-
*
-
*
*CHEM2002 - Dr. Ahmed Al-Dallal - 2013CHEM2002 - Dr. Ahmed
Al-Dallal - 2013*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013CHEM2002 - Dr. Ahmed
Al-Dallal - 2013*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013CHEM2002 - Dr. Ahmed
Al-Dallal - 2013*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013CHEM2002 - Dr. Ahmed
Al-Dallal - 2013*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013CHEM2002 - Dr. Ahmed
Al-Dallal - 2013*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013CHEM2002 - Dr. Ahmed
Al-Dallal - 2013*
CHEM2002 - Dr. Ahmed Al-Dallal - 2013CHEM2002 - Dr. Ahmed
Al-Dallal - 2013
