Upload
yen
View
46
Download
2
Embed Size (px)
DESCRIPTION
ChE 333 Chemical Engineering Laboratory I. Instructors Dr. J. Soltan Dr. C. Kotikalapudi. January 13, 2011. Contact info. Instructors: Dr. J. Soltan Engineering 1C117 [email protected]; ph: 966-5449 Dr. C. Kotikalapudi Engineering 1C145 [email protected]; ph:966-6511. Contact Info. - PowerPoint PPT Presentation
Citation preview
ChE 333Chemical Engineering Laboratory I
January 13, 2011
Instructors
Dr. J. SoltanDr. C. Kotikalapudi
Contact info
• Instructors: Dr. J. Soltan– Engineering 1C117– [email protected]; ph: 966-5449
Dr. C. Kotikalapudi- Engineering 1C145- [email protected]; ph:966-6511
Contact Info
• Coordinator: Dale Claude– Engineering 1D43– [email protected]; ph: 966-4707
Contact info
• Demonstrator/TA: Glyn Kennell– Engineering 0D137– [email protected]
• Demonstrator/TA: Francisco Sanchez– Engineering 1C103– [email protected]
Course information
• Website:http://engrwww.usask.ca/classes/CHE/333/
• Lab location: Engineering 1D25
• Lab time– Monday 14:30 – 17:30– Thursday 13:00 – 16:00
Text:- ChE 333.2 Laboratory Manual
(available online on the course website)
- S. Jeter, J. Donnell. (2004) Writing style and standards in undergraduate reports
Office Hours: open door / email
What Labs ? • Fluid Friction in Pipes, Valves and Fittings
• Ion Exchange in Water Softening
• Viscosity• Centrifugal Pump• Fluid Metering
What Courses related?1. Fluid Friction in Pipes, Valves and Fittings: CHE 210, 320 (Fluid Mechanics)2. Ion Exchange in Water Softening:
3. Viscosity:CHE 210,320 (Fluid Mechanics)
4. Centrifugal Pump: CHE 210, 320 (Fluid Mechanics)
5. Fluid Metering:
COURSE OBJECTIVES:
Develop skills in - Equipment operation
- Data recording
- Analysis of the data using academic theory
- Technical report writing
in the selected typical Chem. Eng. processes
Marking• Lab performance: (4X2.5%)• Lab notebook: 10%• Technical letters: (2X10%)• Brief report: 25%• Formal report: 35% Overall mark: 100%
No exam
90 - 100 80 - 89 70-79 60-69 50-59 <50
Exceptional Excellent Good Satisfactory Minimal Pass Failure
Plagiarism is DEFINITELY NOT acceptable!– Copy other people’s report– Citing without referencing the source
Plagiarism results in 0 mark for the report
Be aware of & Follow the new University of Saskatchewan Academic Honesty/Dishonesty definitions, rules and procedures
www.usask.ca/honesty.
Due Date and Overdue Penalty• Due date for the reports:
- 2 weeks after the experiment date.- The date of submission is counted by the date on which the hard copies of your reports are handed in to and signed by Dale Claude.
AND- Electronic copies of the reports must be sent to both Dale and instructor by email on the same day for verification.- When submission on weekends, the date of submission of reports by email can be counted, however, the hardcopies of your reports must be handed in to Dale on the following Monday to avoid extra delay penalty.
- 7 “free” late hand-in days for the whole course - Must indicate on your reports when use it to avoid late
penalty.
Due Date and Overdue Penalty
Penalty- 10% of the full marks of each report per week (1.4%/day, including weekends, but not including other statuary Holidays) will be deducted from the late reports.
- Submissions including lab notebooks will NOT be accepted after
April 8, 2011.
Requirements
• Lab performance
• Write-ups: technical writing
• Fundamentals of each lab
Laboratory procedure(This slide is courtesy to J. Wiens’ ChE333 Conference Notes 2007)
2 weeks
Lab performanceBe prepared for:• Objectives• Theory / knowledge• Design of experiment• Parameters to be measured• Apparatuses, procedures and principles • Find out: what to learn
Initiate the contact for the pre-lab helpwith the demonstrators & the lab coordinator
Lab performance
• Follow the experimental procedures• Record observations in Lab Notebook• Test the validity of data and/or results • Pay attention to SAFETY issues
– personnel– equipment
During the experiments:
Write-ups / Reports
• Technical memo• Brief report• Formal report
• Lab notebook: during the experiments
Write-ups / Reports
One student is required to hand in– 2 technical letters– 1 brief report– 1 formal report– 1 lab notebook
Write-ups / Reports
No repetition in each group for
– formal report– brief report– technical letters
Write-ups / Reports
You Your partner
Tech. letters Labs A and B Labs C and D
Brief report Lab C Lab A
Formal report Lab D Lab B
Lab notebook Labs A,B,C,D Labs A,B,C,D
In one group, you may label the 4 labs by A, B, C, and D in your own order. Each member of the group should keep the same order.
Lab NotebookNo sheets of paper
Permanently bounded & recorded• Briefly outline the title, date performed, names of
group members, objectives, apparatus, experimental conditions and procedures before labs
Suggest making table for recording data
• Record clearly all original observations, simple calculations of data, & graphs or tables showing salient conclusions from the experiments.
• MUST be examined, dated and initialed by the TAs before leaving the laboratory
Refer to ChE 333 class website for
RULES FOR LABORTORY NOTEBOOKS
Submit the lab notebook at the end of the term for marking
Lab Notebook
Technical Memorandum• Body of text: maximum two pages (single spaced)• Introduction
- concise introduction of the system used- a brief statement of the objectives of the experiment- a general description of the procedure followed
• Results- discussions and comparison of all required results with values from literature- major equations used, but not mixed with text in the same paragraph- a brief table of results or major graphs attached to support the conclusions.
• Conclusions and recommendations
• Sign your memo on the last page below the text
To:From: (your name, group X)Re: (Lab name)Date: (of the preparation of the memo)
Your group logo(optional)
The text of memo is put here below the line.
ChE 414 - TECHNICAL MEMORANDUM GRADE SHEETStudent: ______________________________________Experiment: ______________________________________
Due Date: ___/___/___ Date Rec’d: ___/___/___ Late Penalty: ___ %
MAX MARKPRESENTATION (FORMAT) 3
READABILITY 3TECHNICAL CONTENT(RESULTS & CONCL.)
4
Total 10
Formal Technical Report(double spaced)
– Title page and Table of Contents– Abstract– Table of contents, table of figures, table of tables– Introduction– Review of theory or literature– Experimental Section: apparatus and procedure– Results and Discussion– Conclusions– Recommendations– Nomenclature– References– Appendices
Formal Technical Report
Title page• Course number• Name (Your name and state the partner’s name)• Lab title• Prepared for (instructor’s name)• Date lab done• Date report due
Table of contents
Formal Technical Report
Abstract• State briefly the purpose of the investigation• Describe briefly how the results are obtained• Give all required results in a concise and
quantitative format if possible.• Use words, no tables, figures and equations• Normally no more than 250 words.
Formal Technical Report
Introduction• Include information on the subject of the
investigation and its importance in industry
• Cite the references;
• Describe clearly the objectives of the lab.
Formal Technical Report
Literature review or theory• Provide sufficient theoretical background
to the particular experiments• Develop the equations or models to correlate
your experimental data. Number the equations.
detailed derivation placed in Appendix• Describe how to obtain the model parameters
and predict the particular system• Cite the references
Formal Technical ReportApparatus and Experimental Procedures
• Specify the main apparatuses used make, model and use
• Describe the procedures Highlight important experimental conditions
• Give the names of quality of the materials.
Make sure other people can repeat your work and obtain the same results if they follow your description.
Formal Technical ReportResults and Discussions
• Present the significant experiment results required in the Lab Manual in words and graphs.
• State the data treatment processes and the outcomes.
• Discuss the results of experiments and model simulations or predictions.
• Compare your results with that in literatures if available.
• Logically discuss and lead to conclusions.
Attention• Consistent format• The unit for every parameters in the equations has to
be conformed. • Figures or Tables in the body of text
– Titles of figures, axes, and tables
– Briefly state the experimental conditions
– Experimental data: represented by unique symbol for each group of data in figures
– Modeling curves: different lines with legends– Show model significance when fitting models
Modeling the effect of IS on Cr uptakes40±1 mg AWUS, 20±0.2 mL solution
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0 2 4 6 8 10Equilibrium Cr concentration (mM)
Cr u
ptak
e (m
mol
/g)
without NaCladdition
0.1M NaCl
0.1M NaCl
model predicting curve model prediction when =1
pH 2.0
relative dev.: 5.1%
relative dev.: 11.5%
error bar: 95% confidence interval
Formal Technical Report
Conclusions and Recommendations
• Conclusions should be summarized following the discussions.
• Lists your suggestions on how we can improve the labs.
Formal Technical Report
Nomenclature• Completely lists the symbols that appear
in your report, their definition and unit in a professional and consistent format.
Refer to a published paper.
Formal Technical Report
References• Completely lists every reference cited,
mentioned or used in the text of the report in a professional and consistent format.
• Follows either the number order or the alphabetical order.
Formal Technical ReportReference format examples
In the text:……Adams concluded that ……1. However, that conclusion may be suspicious because ……2
In the Reference section:
References1. Adams, A. B. title of publication. ……2. Cook, H. M., Author #2, ……
Ref: Industrial and Engineering Chemistry Research
or in the text:It was concluded ( Adams, 2001) that ……. However, that conclusion may be suspicious (Davis and Volesky, 2001) because ……(Niu, et. al., 2005)
ReferencesAdams, A. B. year, title of publication, publisher, page (book)Davis, T. and B. Volesky, year, title of paper, volume, issue, pages (paper)Niu, C., M. Huang and B.Volesky, year ….
Ref: Canadian Journal of Chemical Engineering
Formal Technical Report
Appendices• Raw data (neat with tables)• Calculated data• Sample calculation (using a set of data to
show the steps of calculations) • Tables and Figures
Appendices(Courtesy to Jason Wiens’ ChE333 Conference Notes 2007)
• Raw & Calculated data in tables• Sample Calculations
For example1. Calculation of the volumetric flow rate of air through
the absorption column
AUQ o
smQ
msmQ
3
2
5.1
50.00.3
Descriptive title
Keep unitsEquation used
Result with proper sig figs
Brief Technical Report– Title page and Table of contents – Summary
a brief introduction stating the nature and purpose of the investigation a brief explanation of the procedures and apparatuses a summary of all the required most significant quantitative results
– Results and Discussion: include major graphs or tables The most important theory should be mentioned here.– Conclusions– Nomenclature– Recommendations– Appendices: raw and calculated data and a sample
calculationAbsence of abstract, introduction, theory/literature review, materials and methods sections. No more than 15 pages (double spaced).
A good report• Careful measurements• Correct calculations• Understanding and use of the
theory or models• Logical discussions• Correct conclusions
OrganizedClarityNo grammar & typographical errors
• References
Important dates
• 17 Jan: First day of labs• 18 Jan: Last day for making changes in
registration for second-term classes • 21-26 Feb: No classes, Midterm break• 15 March: Last day for withdrawing from
second-term classes without academic penalty• 8 Apr: Last day of classes• 8 Apr: Last day to hand in laboratory reports
and laboratory notebooks for marking
Summary• Academic theory understanding• Lab performance• WRITEUPS
Successful!