Upload
vucong
View
213
Download
0
Embed Size (px)
Citation preview
E
Consumables
E 2 Lens Blocks and Adhesive Pads
E 8 Lens Protection and Anti-Torsion Foil
E 9 Anti-Foaming Agent
E 10 Abrasive Stones and Lens Marking Pens
E 13 Screw Securing and Glues
E 16 Disinfectant Wipes
E 18 Tips & Tricks: Plasti Dip
E 22 Dye
E 24 Oils, Cleaners and Flux
E 25 Solder
E 28 Repair Colours and Repair Pens
E 30 Abrasives
E 32 Tips & Tricks: Polishing
E 34 Buffi ng Wheels and Brushes
E 36 Polishing and Sanding Wax
E2
12
3 4
1
2
3
4
NIDEK Lens Block Mini Cup
Flexible lens block for NIDEK machines with original NIDEK Mini pick up. For small and fl at shapes only.
Please use the matching B&S adhesive pad No. 2508 15 only!
20 x 15 mm 10 pieces
NIDEK Lens Block Pliable Cup
Flexible lens block for NIDEK machines with original NIDEK pick up.
Due to the larger surface of the lens block the risk of axis distortion is reduced.
Please use the matching B&S adhesive pads No. 2502 17, 2503 17, 2506 17, 2507 17, 2508 17, 2510 17 and 2511 17 only!
3710 17N
30 x 17mm 10 pieces
Green (right lens) Mixed colours for right and left
lenses (5x red and 5x green)
Red (left lens)
3710 17R 3710 17G 3710 50
3711 17
For high curves from base 7.
Up to curve 6.
30 x 17mm 10 pieces
3714 15Green (right lens) Mixed colours for right and left
lenses (5x red and 5x green)
Red (left lens)
3714 15R 3714 15G 3714 50
Lens Block
Adhesive Pad
Anti-Torsion Foil
Protection Foil (back of the lens)
Up to curve 6.
E3
NIDEK Lens Block Nano Cup
Flexible lens block for NIDEK machine LEX 1000.
For very small and fl at shapes. To be used with the complete outer ring.
Please use the matching B&S adhesive pad No. 2503 13 only!
30 x 17mm/18 x 13.5 mm 10 pieces
Green (right lens)Red (left lens)
3715 13R 3715 13G 3715 13
White
Flat curve
3700 20
25 x 20 mm
10 pieces
Red
For high plus lenses
3700 25
25 mm
25 pieces
White
Flat curve
Red
For high plus lenses
3701 20 3701 25
25 x 20 mm
10 pieces
25 mm
25 pieces
Mixed colours for right and left
lenses (5x red and 5x green)
Up to curve 6.
Vario Block
Flexible plastic, for adhesive pads. Suitable for WECO-system.
E4
Adhesive Pads
for Super Hydrophobic Lenses
• Material: Ethyl vinyl acetate foam
• Including anti-torsion foil
• In a dispenser box 1 roll (500 pieces)0.9 mm
2511 14 2511 16 2511 17
2511 19 2511 22 2511 24
in mm
21 x 14
26 x 16
31 x 17
30 x 18
22
24
Order No.
2511 14
2511 16
2511 17
2511 19
2511 22
2511 24
Adhesive power Protection against axis slip Type for blocker
Universal
Universal
NIDEK
Universal
Universal
Universal
No. 3710 . . | 3711 17very high, for
super hydrophobic lenses
very high, including
anti-torsion foil
• Material: Ethyl vinyl acetate foam
• Including anti-torsion foil
• In a dispenser box 1 roll (500 pieces)0.9 mm
2510 17 2510 18 2510 24
in mm
31 x 17
30 x 18
24
Order No.
2510 17
2510 18
2510 24
Adhesive power Protection against axis slip Type for blocker
NIDEK
Universal
Universal
No. 3710 . . | 3711 17
very high, for
super hydrophobic lenses
high, including
anti-torsion foil
Adhesive pads should not be stored longer than 6–12 months
depending on the material. Storage should be at room tempe-
rature (approx. + 18 °C) and with a humidity of approx. 30 %.
E5
Adhesive Pads for Hydrophobic Lenses
• Material: Ethyl vinyl acetate foam
• In a dispenser box 1 roll (500 pieces)
in mm
21 x 14
31 x 17
30 x 18
22
24
Order No.
2507 14
2507 17
2507 18
2507 22
2507 24
Adhesive power Protection against axis slip Type for blocker
Universal
NIDEK
Universal
Universal
Universal
No. 3710 . . | 3711 17
very high, for
hydrophobic lensesvery high
2507 14
2507 22
2507 17
2507 24
2507 18
• Material: Polyurethane foam
• In a resealable polybag 10 strips (200 pieces)
in mm
22 x 15.5
31 x 17
18
24
Order No.
2508 15
2508 17
2508 18
2508 24
Adhesive power Protection against axis slip Type for blocker
NIDEK Mini-Cup
NIDEK
Universal
Universal
No. 3714 . .
No. 3710 . . | 3711 17high, for
hydrophobic lenseshigh
2508 15 2508 242508 17 2508 18
0.9 mm
0.9 mm
E6
2503 13 2503 17 2503 18 2503 26
2502 14 2502 17 2502 18
2502 19 2502 24
• Material: PVC fi lm
• Comparable with 411 quality (thin very strong line)
• In a dispenser box
(pieces)in mm
21 x 14
31 x 17
18
30 x 18
30 x 20
24
Order No.
2502 14
2502 17
2502 18
2502 19
2502 20
2502 24
Adhesive power Protection against axis slip Type for blocker
Universal
NIDEK
Universal
Universal
Universal
Universal
No. 3710 . . | 3711 17
No. 3702 20
high, for
standard lenseshigh
1 roll (500)
1 roll (1,000)
1 roll (1,000)
1 roll (500)
1 roll (1,000)
1 roll (1,000)
2502 20
0.38 mm
Adhesive Pads for Standard Lenses
• Material: Ethyl vinyl acetate foam
• 3M Leap III Adhesive Pads – the original 3M with double pull tabs
• In a dispenser box
• In a resealable polybag (2503 13) 0.8 mm
(pieces)in mm
31 x 17
18
26
2503 17
2503 18
2503 26
Adhesive power Protection against axis slip Type for blocker
NIDEK
Universal
Universal
No. 3710 . . | 3711 17very high, for
standard lensesvery high 1 roll (1,000)
1 roll (1,000)
1 roll (1,000)
Order No.
2503 13 31 x 17
18 x 13.5NIDEK Nano-Cup No. 3715 13 (two-piece) 5 strips (100)
see table
see table
E7
2506 17 2501 24
2500 24
2501 18
in mm
31 x 17
18
24
30 x 18
24
Order No.
2506 17
2501 18
2501 24
2500 19
2500 24
Adhesive power Protection against axis slip Type for blocker
NIDEK
Universal
Universal
Universal
Universal
No. 3710 . . | 3711 17
high, for
standard lenseshigh
Adhesive Pads for Standard Lenses
• Material: Polyolefi n foam (2501 . .), Polyethylene foam
• In a dispenser box 1 roll (1,000 pieces)0.8 mm0.9 mm (2501 18)
2500 19
E8
2560 35
GECKOlensgrip
• Grip spray for lenses with hydrophobic and clean effect coatings
• Prevents axis slippage during the edging process
• Works additionally as a protective fi lm to reduce the possibility of scratches and can be applied
on the front and back side
• Can easily be removed with conventional cleaning agents
• Dries quickly and is economical in use
2561 00
(pieces)in mm Product information Field of application
To protect the front and back of the lens during the edging
process. This protection foil is especially made for lenses
with high-quality coatings. Storing period for adhesive
pads: 6 months.
To protect the front and back of the lens during the edging
process. This protection foil is especially made for lenses
with high-quality coatings. Storing period for adhesive
pads: 6 months.
For high curved lenses. To protect the front and back of
the lens during the edging process. This protection foil
is especially made for lenses with high-quality coatings.
Storing period for adhesive pads: 6 months.
To protect the back of the lens during the edging process.
1 roll (500)
1 roll (500)
1 roll (500)
1 roll (1,000)
Lens Protection and Anti-Torsion Foil
2560 312560 30 2560 32
Order No.
Anti-torsion foil
2560 30
2560 31
2560 32
2560 35
40 x 28
40 x 26
40 x 26
35
For lenses with + 4.5 dpt.
on the front surface.
For lenses with + 4.5 dpt.
on the front surface.
Oval shape for better
handling!
For lenses with high base
curve.
Especially fl exible!
100 ml
Lens protection
100 x 13 x 25 mm
E9
Anti-Foaming Agent
• Prevents foam formation during grinding
• Protects machine parts from corrosion
• Improves overall care of the machine
• Rapid decline of dirt particles
• Has minimal aerosol development
• Contains no hazardous substances, is physiologically safe
• Mixing ratio: 200 ml grinding additive for 20 litre water
Environmentally friendly Anti-Foaming Agent
The 100 % ecological compatibility of this item together with its high yield and effectiveness have earned it the B&S title of Top Product.
Proving itself with its fi rst use it does away with any annoying creation of foam during the grinding process. Another positive effect is the
reduced corrosion of machine parts. Especially recommended by the B&S goes Green team.
Anti-Foaming Agent, blue
• Prevents foaming during grinding process
• Improves the grinding process
• Cools and protects machine parts from corrosion
• Improves overall care of the machine
• Reduces the grinding foam
• Rapid decline of dirt particles
• Has minimal aerosol development
• Contains no hazardous substances, is physiologically safe
• Very effi cient (100 ml grinding additive for 20 litre water)
3148 50
3149 00
500 ml
1,000 ml
Bag Insert for Grinding Water Tank
Made of grey, tearproof plastic.
To prevent chemical reactions we recommend changing the water
for the edger every second week.
2900 51
10 pieces800 x 560 x 0.06 mm
E10
Replacement Leads
• Suitable for retractable graphite pencil No. 2624 02 and 2624 05
• In plastic box
Lens Marking Pen
• Especially for lenses with clean effect coatings
• Water resistant
• Remove colour with spirit alcohol
• In a patent-registered box
• Two types: fi ne and super fi ne
Retractable Graphite Pencil
• Applicable to foils, spectacle lenses and even surfaces
• White is recommended for dark materials, especially for tinted lenses
• Refi llable with leads No. 2624 22 and 2624 55
2625 01
2625 05
2627 01
4 pieces
4 pieces
4 pieces
Black, fi ne
2624 02
2624 05
2624 22
2624 55
12 pieces
12 pieces
Red, fi ne
Black, super fi ne
Red
White
Red
White
• Colour: White
• Type: Fine
• Field of application: Diamond wheels of edgers
• Colour: Red
• Type: Rough
• Field of application: Diamond wheels of edgers
• Colour: Light blue
• Type: Very fi ne
• Field of application: Diamond polishing wheel
3419 00
3423 12
3422 12
3424 12
• Type: Fine
• Field of application: Diamond wheels, fi ne
Abrasive Stones
100 x 8 x 25 mm
100 x 13 x 25 mm
110 x 12 x 25 mm
100 x 13 x 25 mm
40 g
831 g
927 g
80 g
12 pieces
12 pieces
Whetstone for Hand Edger, green
Lens Marking Pen
• Especially for lenses with clean effect coatings
• Light, water and abrasion resistant ink
• Dries quickly and can be removed with spirit alcohol
• Stroke width: 0.8 mm
• Tip: round tip
2620 02 2 piecesWhite
E11
Universal Pen, Fine
• Waterproof for permanent marking
• With dry safe function – pen can stay open for hours
without running dry
• In a patent-registered box
2623 01
2623 05
4 pieces
4 pieces
Black
Red
Ink Remover Pen
The marking on lenses can be easily removed with this ink remover pen
and can be used on all types of lens material.
2630 00
Foil Pen
Water soluble, smudge-proof foil pen for occlusion foils,
lenses and prism foils.
2628 01 Black 2 pieces
E12
3184 10
3184 09
E12
3184 03
You will fi nd the UV lamps No. 2430 20 and 2420 10 on page A 47.
Conical shape
for easier
dispensing
UV Gel 3184 . .
Use for fi lling in drill holes accidentally drilled too large or incorrectly.
The gel cures fi rmly when exposed to the UV lamp
• Glue cures through UV rays
• To use for fi tting rimless frames
• Transparent, dries very hard
• Glue can be drilled once completely hardened
Accessories:
UV Gel Inverted Holder
• UV glue is always ready for use and can be used up to the last drop
• Stable and perfect for immediate use
• No air bubbles in the cannula
• Supplied without application bottle
a)
UV Gel Applicator
• Perfect for delicate fi ttings
• Handy, convenient
• No air bubbles in the cannula
b)
UV Gel Application Bottle
• Convenient application bottle
• Reclosable
• With application tip for precise dispensing
3184 03 3 ml
3184 10 10 ml 3184 09 40 x 65 x 50 mm
Available as:
E13
Contents: 10 ml
Contents: 50 ml
Loctite 221
• Medium fi rmness
• Contents: 10 ml
• Colour: Red
Loctite 243
• High fi rmness
• Colour: Blue
Loctite 259
• Low fi rmness
• Contents: 50 ml
• Colour: Red
Screw Securing
Screw Fastener with
Patented Dispenser Tip
• Low fi rmness
• Contents: 10 g
• Colour: Blue
3159 00
3161 15 3178 00
3161 00
3161 05
• The fi lling level of the glues can vary due to the production process
• The details for the fi rmness refer to the usage of frame screws and can therefore differ to the manufacturers information
LOCK AN 302-21
• Newly developed Pen-System which enables
pen positioning
• Easy application, clean processing and
improved dosing
• Medium fi rmness
• Contents: 1 pen 20 ml
• Colour: Red
Comparable with Loctite 221
3160 00
LOCK AN 302-43
• Newly developed Pen-System which enables
pen positioning
• Easy application, clean processing and
improved dosing
• High fi rmness
• Colour: Blue
Comparable with Loctite 243
3164 00 Contents: 1 pen 10 ml
3164 05 Contents: 1 pen 50 ml
E14E14
Loctite 4850
• Superglue especially for polycarbonate
and Trivex
• Stays fl exible after curing
• Colour: Transparent
Suitable for Progear Eyeguard!
Loctite 460
• Superglue
• Also suitable for poly carb onate and
Trivex lenses
• Contents: 20 g
• Colour: Transparent
3162 00 3162 10Contents: 5 g
3162 02 Contents: 20 g
Instant Adhesive
Universal Adhesive
Loctite 454 Gel
• General purpose gel
• Ideal when non-drip application is required or
for use on vertical or overhead surfaces
• Stays correctable for several seconds
• Ideally suited for applying rhinestones
• Contents: 3 g
3162 30
Loctite 401
• All-purpose adhesive
• Contents: 5 g
• Colour: Transparent
3162 20
3177 00 3163 00
Glass Adhesive
• To glue lenses into all types of frames, also
to be applied as a liquid lining
• Contents: 9 ml
Loctite Glass Glue 3494
• Suitable for fi xing correction lenses in
diving masks
• Solvent-free and crystal clear
one-component glue
• For glass and UV permeable plastics
• Contents: 25 ml
Loctite Glass Glue 323
• Solvent-free and crystal clear
one-component UV glue
• For a durable bonding of optical elements
like glass and UV permeable plastics
• Flow rate: very high
• Contents: 50 ml
Glass Glues
B&S Silicone Adhesive
A must have for all rimless frames.
Transparent special silicone with a refraction
index of 1.56 allows for the carefree bonding
and padding on drilled spectacles.
• Silicone is 100 % compatible with
all materials
• Maintains its fl exibility
• Suitable for polycarbonate and Trivex
• Tested and recommended by
“Flair Modellbrillen”
• Contents: 10 ml
3181 30
3181 20
E15
• The fi lling level of the glues can vary due to the production process
• The details for the fi rmness refer to the usage of frame screws and can therefore differ to the manufacturers information
Optivit Set
• Two-Components-Glue
• To bond plastic frames (no Optyl)
• Short curing time (4–5 minutes)
• Contents: 1x 10 ml, 1x 20 ml
Superglue Liquid
• Solvent-free
• Multi-use and economical
• Also suitable for polycarbonate
• Contents: 3 ml
Plastic and all Purpose Glues
3130 03 3183 02
Adhesive SICO MET 40
• Fast curing, solvent-free super glue
with high fl ow rate
• Sticks together in seconds
• Also suitable for polycarbonate
• Contents: 20 g
3185 30
3185 12
Solvent for glue
• Newly developed Pen-System which enables
pen positioning
• Easy application, clean processing and
improved dosing
• Solvent for all cyanoacrylate glues
• Short curing time
• Not suitable for polycarbonate and
Trivex lenses
• Contents: 1 pen 30 g
3185 22
Super Glue
• Newly developed Pen-System which enables
pen positioning
• Easy application, clean processing and
improved dosing
• Area of application: plastics, rubber, metal,
balsa wood, leather
• Final strength after 24 hours
• Not suitable for polycarbonate and
Trivex lenses
• Contents: 1 pen 12 g
E16
Acetone
• To bond plastic frames
• To clean surfaces
• For plastic frames (no Optyl)
• Contents: 100 ml
Special Cleaner for
Spectacle Lenses
• Cleaner for polycarbonate, plastic and
Trivex lenses
• Ideal for removing residues of the B&S
silicone adhesive No. 3163 00
• Does not cause any damage to the material
• Contents: 100 ml
3173 00 3175 00
Disinfectant Wipes – Dispenser
• For cleaning and disinfecting of surfaces of refraction units,
autorefractometers, keratometers, etc.
• Effective spectrum against bacteria, fungus and viruses
(HCV, HIV, Infl uenza A&B, Polio)
• Skin friendly with a pH-value of 7.0
• 100 pieces: 180 x 125 mm
3154 01
Disinfectant Wipes – Refi ll Pack
• 100 pieces: 180 x 125 mm
3154 00
E17
1488 03
1406 00 1407 00
1488 04
1487 10
Fluid Dispenser
• Fluid dispenser for acetone, alcohol etc.
• Pump mechanism, can be used with one
hand, reduces odour, plastic HDPE, with
steel cover
• With pre-printed sticky labels
• Capacity: 125 ml
Glass Beaker for Chemicals
• With ground stopper and pipette,
for airtight storage of chemicals
• Capacity: 50 ml
Plastic Bottle
• Material: LDPE
• Capacity: 1 l
Stand for Mixing Mould Mixing Mould
6 pieces21 mm
Application Tips
• Short metal tip for easy dispensing of
super glue
• Long, fl exible plastic tip can be shortened
if tip becomes blocked
• Inner diameter: each with 0.84 and 0.25 mm
Application Tips
made of Plastic
• For exact dispensing of screw fastener
• Inner diameter: 0.84; 0.5 and 0.41 mm
1405 10 1405 203 pieces 4 pieces
Fluid dispenser
• Fluid dispenser for acetone, alcohol etc.
• Pump mechanism, can be used with
one hand, reduces odour
• PP material with plastic cover
• Capacity: 120 ml
1489 00 3 pieces
E18
www.youtube.com/user/BreitfeldSchliekertTips & Tricks
ScratchProtection ina Twinklingof an Eye!
Plasti Dip
Rubber Coating
Plasti Dip
No. 3169 00 , 01, 02, 03
Thinner
No. 3169 10
Container, syringe,
stirring spoon
approx. 5–10 minutes
without drying period
E19
1 2 3
4 5
4 5 6
This is how it works
TIP: Undiluted Plasti dip can be refi lled into the Plasti Dip can. Diluted Plasti Dip can be stored in a lidded can.
Adding, stirring, dipping, drying
Let the plier dry for 12 hours.Dip the tips of the plier, for a second layer
repeat the dip after 20–30 minutes.
Let the plier dry for 12 hours.Dip the tips of the plier, for a second layer
repeat the dip after 20–30 minutes.
Add approx. 2–3 ml thinner by a syringe to
the Plasti Dip fi lled container. Add more
thinner if needed.
Clean the plier thoroughly. Stir the Plasti Dip carefully, avoid air bubbles! Fill the undiluted Plasti Dip in a container.
Option 2: With thinner – for uneven surfaces (e.g. tip of the nose pad arm adjusting plier)
Option 1: Without thinner – for smooth surfaces (e.g. plier tips)
Repeat step 1–3
Cleaning Stirring Fill in undiluted
Dipping Drying
E20
Starter Set
Contains 3 colours (black, blue and red) and one bottle of thinner.
Plasti Dip
Plasti Dip Thinner
3169 . . 200 g
3169 10 250 ml
3169 50
Plasti Dip rubber coating – page E 18 and E 19
Plasti Dip – Professional Protection whilst Adjusting Frames
Protects, gives grip and stays fl exible
Plasti Dip – Multi-Purpose Synthetic
Rubber Coating
• Can be used on metal, glass, stone and wood
• Air drying synthetic rubber coating
• Easy to apply by dipping or brushing
3169 00
3169 01
3169 02
3169 03
Black
Blue
Red
Transparent
Tips & Tricks
E21
Lens Deco Pens
To colour lens edges and nylon threads.
For all materials including polycarbonate.
• One pen will colour over 300 lenses
• Air dry for only 20 minutes
• The colour can be removed with the corrector pen at any time,
no time limit
• Simply wipe off the colour with acetone or spirit with the exception
of polycarbonate lenses
• Available in 15 colours plus 1 corrector pen:
All included in No. 2610 51
Clean the lens edge thoroughly with lens cleaner No. 3175 00 or with an ultrasonic cleaning unit before application. For best results do not polish the
lens edge. Shake the pen and gently push in the cartridge to fi ll with colour. For easy application attach the lens to a lens groover. Use lens cleaner
No. 3175 00 to clean lens after application. Please screw cap on tightly after each use to prevent the pen from drying out.
Lens Deco Pen Set
• Consisting of 12 pens plus 1 corrector pen
• We reserve the right to change the assortment
2610 51
2610 . .
Order No.
2610 01
2610 02
2610 03
2610 04
2610 05
2610 06
2610 07
2610 08
Colour
Black
Violet
Ochre
Cognac
Fuchsia
Grey
Plum
Dark green
Code
4
5310
5315
5326
5328
5330
5331
5332
Code Order No.
2610 09
2610 10
2610 11
2610 12
2610 13
2610 14
2610 15
2610 00
Colour
Light turquoise
Rose
Bronze
Blue
Brown
Bordeaux
Light blue
Corrector Pen
Code
5341
5617
5634
5636
5340
5333
5339
Code
E22
Lens Dye Packets
• Water soluble dye powder for tinting lenses
• Ready prepared for 1 litre tinting solution
• The powder bag dissolves completely when mixed with hot water
• Contents: 10 g
2615 . .
2615 29Yellow
2615 26Orange
2615 24Red
2615 23Fuchsia
2615 17Blue
2615 16Dark blue
2615 12Green
2615 11Dark green
2615 06Brown
2615 04Steel grey
2615 03Grey blue
2615 02Grey green (G-15)
2615 01Black
E23
UV Filter Additive
• Water soluble powder
• To apply an UV fi lter on lenses
• UV-protection to 400 nm
• Ready prepared for 0.5 litre tinting solution
• The powder bag dissolves completely when mixed with hot water
• Contents: 35 g
2616 00
Heat Transfer Fluid
• Special oil, can be used instead of distilled water
• No loss of liquid by evaporation
• Especially suitable for frequent use
• Contents: 1 l
2617 00
Neutraliser
• Removes colour from tinted lenses
• Contents: 1 l
2618 00
You will fi nd the tinting unit Tinta 2 for 2 pots No. 2880 01
on page A 48.
E24
Oil Dropper
Made of plastic, with single drop release,
only use acid-free oil No. 3171 00.
Delivered without content.
2740 00
Oil
• For spectacle hinges, high quality, non-acidic
• Contents: 20 ml
Compressed-Air Spray
Removes dust and fl uff quickly and reliably
from sensitive surfaces and parts which are
not easily accessible.
Applications: Optics, instruments, medical
technology, clock pieces, keyboards, hi-fi ,
videos, electrical equipment and model making
Contents: 400 ml
Braze Tec h 80 Flux
• For diffi cult to process materials, such as
stainless steel
• Leaves no residue on the soldered area
• Consistency: Paste
• Contents: 100 g
3171 00
Drill Oil
• For cooling during drilling
• Contents: 100 ml
3170 00
3174 15
3114 00
Fluoron
• For high temperature soldering
• Consistency: Liquid
• Contents: 100 ml
Silicone Care Spray
Cleans and protects automatic grinders,
machinery and equipment. Impregnates
rubber, plastic and leather. Repels dirt and
water, eases friction parts. Protects against
corrosion and oxidation.
Important!
Do not allow spray to come into contact with
spectacle lenses.
Contents: 400 ml
3174 10
Braze Tec h Flux
• Consistency: Paste
Contents: 100 g3112 00
Contents: 500 g3112 05
3101 00
Heatstop
• Isolating paste for all types of soldering
• Consistency: Paste
• Contents: 100 g
3029 00
120 mm
If dried out, welding fl ux and heat stop can be sprayed with
distilled water.
For hard solder and any heavy metal materials, also nickel free:
E25
3002 00
Silver Palladium Wire
Only for use with spectacle frames with nickel
content, such as monel or German silver.
Material strength: 0.4 mm
Steel Wire
Only for use with stainless steel frames.
Material strength: 0.4 mm
Solder Dispenser
“Original Degussa”, for Degussa solders
No. 3007 00 and 3040 00.
Opening: 1.8 mm
white fl uid, fl ux included
Silver Solder, white fl uid
• For jewellery and frames
• To use without additional fl ux
• Metal contents: 56 % Ag
• Melting point: 650 °C
• Field of application: Jewellery and
metal frames
• Contents: 8 g
3043 30 3043 10
2059 00
3043 20
20 g200 mm
You will fi nd the soldering station
No. 2757 00 and equipment
on page A 42.
2 à 25 cm
Titanium Wire
Only for use with titanium frames.
Material strength: 0.3 mm
2 à 25 cm 2 à 25 cm
This material can be used whilst welding. Using this material, the welding will last longer.
E26
Hard Solder silver
Silver Solder Degussa 6002
without Cd
Solder wire, white fl uid
Phantom Solder
Silver Solder Degussa 600 L 3
Bronze, nickel, stainless steel
60 % Ag without Cd
680 °C
3112 . . Braze Tec h
0.5 mm wire Ø
5 g
approx. 230 cm
3003 00 3007 00
Jewellery
60 % Ag without Cd
680 °C
3112 . . Braze Tec h
0.4 mm wire Ø in dispenser
2 g
approx. 110 cm
3010 003008 00
Field of application:
Metal contents:
Melting point:
Recommended Flux:
Form:
Sales unit:
Length:
For practice, also suitable
for nickel-free material
55 % Ag, Sn
660 °C
3112 . . Braze Tec h
0.5 mm wire Ø in dispenser
3 g
approx. 130 cm
All silver alloy over
800 ‰ fi neness
675 ‰ Au
710 °C
3112 . . Braze Tec h
0.4 mm wire Ø
3.5 g
approx. 230 cm
3014 00
Field of application:
Metal contents:
Melting point:
Recommended Flux:
Form:
Sales unit:
Length:
Jewellery
60 % Ag, 23 % Cu, 14.5 % Zn, 2.5 % Sn
680 °C
3112 . . Braze Tec h
0.5 mm wire Ø
5.3 g
approx. 280 cm
Field of application:
Metal contents:
Melting point:
Recommended Flux:
Form:
Sales unit:
Length:
Solder
E27
white fl uid, fl ux includedyellow fl uid, fl ux included
Gold Solder,
8 Ct
Universal Solder,
yellow fl uid
Universal Solder,
white fl uid
gold fl uid, fl ux includedwhite fl uid, fl ux included
Pallarium – Universal Solder,
white fl uid
Pallarium – Universal Solder,
gold fl uid
Solder Wire,
yellow fl uid
3016 00
Field of application:
Metal contents:
Melting point:
Recommended Flux:
Form:
Sales unit:
Length:
3020 03
Field of application:
Metal contents:
Melting point:
Recommended Flux:
Form:
Sales unit:
3022 03
All metals such as silver, nickel, chrome,
stainless steel, brass, etc.
40 % Ag
700 °C
Without fl ux
Tube 1 mm Ø
3 tubes at 150 mm each
3023 00 3023 01
Field of application:
Metal contents:
Melting point:
Recommended Flux:
Form:
Sales unit:
All standard metals such as nickel, silver, chrome,
stainless steel, gold, brass and others.
Light yellow tint, standard quality,
equivalent to 20 carat
580 °C
Without fl ux
Tube 1 mm Ø
12 rods at 150 mm each
Jewellery and metal frames
of gold alloy
333 ‰ Au
590 °C
3101 00 Fluoron
Wire 0.5 mm Ø
1 g
approx. 70 cm
All metals such as silver, nickel, chrome,
stainless steel, brass, etc.
50 % Ag
670 °C
Without fl ux
Tube 1 mm Ø
3 tubes at 150 mm each
All standard metals such as nickel, silver, chrome,
stainless steel, gold, brass and others
Light yellow tint, standard quality,
equivalent to 20 carat
580 °C
Without fl ux
Tube 1 mm Ø
12 rods at 150 mm each
3015 00
All metals such as silver, nickel, chrome,
stainless steel, brass, etc.
55 % Ag, 21 % Cu, 22 % Zn, 2 % Sn
660 °C
3101 00 Fluoron
Wire 0.4 mm Ø
5 g
approx. 75 cm
E28
Repair Colours
Coloured quality lacquer for small repairs on frames, for example
re-colouring after soldering. The colours may be mixed. The clear
lacquer can be used for small repairs of protection lacquer and
to optimise the colours.
1 bottle = 12 ml
Repair Colour Set
Consisting of all 9 colours plus clear lacquer.
• Available in 9 colours plus clear lacquer:
2611 50
2611 . .
Order No.
2611 00
2611 01
2611 02
2611 03
2611 04
Colour
White
Black
Metallic silver
Metallic gold
Blue
Code Order No.
2611 05
2611 06
2611 07
2611 08
2611 09
Colour
Red
Yellow
Green
Brown
Clear Lacquer
Code
• Thoroughly clean frame parts to be repaired
• Shake the bottle well, you must be able to hear the ball bearing
• Apply the colour to the desired area
• Allow 6 hours to dry
• If necessary apply an additional coat of clear lacquer
E29
Repair Pens
With repair pens you can successfully:
• Repair scratches
• Cover solder or welding traces
• Can also be used to cover corrosion caused by perspiration
Usable for metal and plastic frames.
Repair Pen Set
Consisting of 12 pens plus 1 corrector pen.
2612 . .
2612 50
• Thoroughly clean the frame part to be repaired
• Shake the pen and press the tip in several times until you see the colour come through
• Put the colour on the required area
• Leave to dry for 10 to 20 minutes. Use a frame heater to dry quicker
• A second coat of clear lacquer may be required
• Not appropriate for paint coats that have received heat treatment
• Available in 12 colours plus 1 corrector pen:
Order No.
2612 00
2612 01
2612 02
2612 03
2612 04
2612 05
2612 06
Colour
Gloss black
Matt black
Dark blue
Light blue
Rose gold
Yellow gold
Gunmetal
Code Order No.
2612 07
2612 08
2612 09
2612 10
2612 11
2612 12
Colour
Light silver
Light brown
Dark brown
Protective lacquer clear gloss
Protective lacquer clear matt
Corrector Pen
Code
E30
Diamond Tool Cleaner
Pencil shaped; a bundle of 1,500 fi nest steel
wires guarantees the cleaning of drill bits,
millers and diamond drill bits. The grade
is adjustable.
Brass Cleaning Brush
• Core: Metal
• Bore Ø: Conical
• Weight: 25 g
Filing Brush
Flat.
• Dimensions (w x d): 250 x 35 mm
• Coated surface: 105 mm
Abrasive Paper
• Dimensions (w x d): 230 x 280 mm
• 1 pack = 5 sheets
Abrasive Rubber
To clean solder points, to dull metals and plastic.
• Dimensions (w x h x d): 80 x 20 x 50 mm
3506 00
50 mm 10 mm
3501 00 120 mm
3516 00
3251 18
3251 24
3251 32
3251 40
3251 60
3251 80
Granulation: 180
Granulation: 240
Granulation: 320
Granulation: 400
Granulation: 600
Granulation: 800
3412 01
3412 02
3412 03
Granulation: Rough
Granulation: Medium
Granulation: Fine
3251 . .
3412 . .
E31
3290 11
3290 15
3290 13
Marking Needle
• With hard metal tip
• Ball pen type
• Retracts for safety
• Black plastic grip to optimise the handling
• Spare tips available
Tips for Marking Needle
• Hard metal spare tips
Sanding Pen
The ideal tool for preprocessing and reworking soldering and
welding points.
• For cleaning soldering and welding points diffi cult to access
• Available with sanding insert (fi ne or rough grit) or glass fi bre leads
• The fi ne grit removes a small amount of material
and leaves a matt surface, acts on metal surfaces as if polished
• The rough grit removes more material and leaves a matt surface
• Easy handling and cleaning with the glass fi bre lead by using it
like a brush
Grinding Sponge Disc
• With plastic adaptor in 10 and 20 mm
• Granulation: 46
• Max. speed: 4,780 rpm
• Bore Ø: 10 mm, 20 mm
• Weight: 260 g
3426 10 100 mm 20 mm
2302 00 117 mm
2302 10 2 pieces
3290 01
3290 03
3290 05
3290 11
3290 13
3290 15
Sanding pen fi ne with holder
Sanding pen rough with holder
2 glass fi bres leads (with holder)
Sanding insert fi ne (without holder)
Sanding insert rough (without holder)
Glass fi bre lead (without holder) 2 pieces
E33
BAKELITE, HORN, CAOUTCHOUC, METAL
WHEEL DIAMETER (MM)
100 125 150 175 200 250 300 350 400 450 500 600 1000
300 16600 11 13 14 16 19 31800 11 13 15 17 19 21 25 421400 11 13 15 18 22 26 29 23 37 441600 13 15 17 21 25 29 33 38 42 501800 12 14 17 19 24 28 33 38 42 47 562000 10 13 16 18 21 26 31 36 42 47 522200 12 14 17 20 23 29 35 40 46 52 582400 13 15 19 22 25 31 38 44 50 57 2600 14 17 20 24 27 34 41 48 532800 15 18 22 26 29 37 44 51 583000 16 20 24 28 31 39 47 55
SP
IND
LE S
PE
ED
(RP
M)
ACETATE, OPTYL, CELLULOID, PROPIONATE
Rough polishing
Grinding wax Buffi ng wheel, wool cone
3120 00 3416 10, 3474 00
Fine polishing
Polishing wax Buffi ng wheel, wool cone
3122 00, 3118 00 3416 10, 3474 00
High gloss polishing
Burnishing wax Buffi ng wheel, wool cone
3125 00, 3470 01, 3471 00, 3472 00,
3118 00 3561 00, 3582 00, 3571 00
LENS EDGE POLYCARBONATE
Lens polishing
Polishing paste Felt cloth buff
3127 00 3457 00
LENS EDGE CR 39, TRIVEX, PNX
Rough polising
Polishing paste Felt discs
3128 00, 3129 01 3455 10, 3450 00, 3456 00
Fine polishing
Polishing paste Felt cloth buff
3128 00, 3129 01 3474 00, 3457 00
METAL
Rough polising
Polishing wax Buffi ng wheels
3144 00 3471 00, 3470 01, 3472 00,
3474 00, 3416 10
Fine polishing
Polishing wax Buffi ng wheels
3143 00 3471 00, 3470 01, 3472 00,
3474 00, 3416 10
Leather buffi ng wheel
without any wax 3462 00
Information:
Plastic:
Cutting speed 6 and 24 m/s
Thermoplastics and other heat sensitive plastics:
Cutting speed 15 m/s
Thermosetting plastics (Optyl):
Cutting speed 15 m/s
Defi niton:
The cutting speed is the speed at which the tool lip penetrates the
material, also known as peripheral speed. For grinding and polishing
machines, this speed is measured in m/s. The cutting speed is
determined by the speed of the machine and the tool diameter.
It is important for a smoothly processed surface.
It is calculated as follows:
Cutting speed (v) in meter per second (m/s) equals diameter (d)
in meters (m) x π x times speed (n) divided by 60;
Formula: v = d x π x n / 60
This is how it works
E34
Felt Disc, conical
shaped Soft Set Felt
• Core: Centered
• Bore Ø: 8 mm
Felt Buffi ng Wheel
• Core: Plastic
• Bore Ø: Conical
Felt Disc
with Groove
• Core: Centered
• Bore Ø: 10 mm
Felt Disc
• Core: Centered
• Bore Ø: 10 mm
Felt Cloth Buff
for Polycarbonate
To extend service life the red rings
can be separated individually.
The felt cloth buff in combination
with the polishing wax
No. 3127 00, is perfectly suited
for polishing Polycarbonate
lenses – optimum speed for the
treatment of Polycarbonate:
approx. 1,500 rpm.
• Core: Plastic
• Bore Ø: Conical
Leather Buffi ng
Wheel
No. 3462 00 is especially suitable
for the fi nal polishing of metal
rubber, paladon, bakelite, horn etc.
Use the wheel dry without any
polishing compound.
• Core: Plastic
• Bore Ø: Conical
Muslin Buffi ng
Wheel
• Core: Leather
• Bore Ø: 6 mm
Muslin Buffi ng
Wheel
• Core: Leather
• Bore Ø: 6 mm
3418 00
100 mm 15 mm
3450 00
100 mm 20:5 mm
3455 10
100 mm 25 mm
3456 00
100 mm 25 mm
3457 00
80 mm 25 mm
3462 00
90 mm 6 mm
3470 01
125 mm 12 mm
3471 00
125 mm 24 mm
Perfectly Polished – page E 32 and E 33Tips & Tricks
E35
Buffi ng Wheel
• Core: Plastic
• Bore Ø: 8 mm
Flannel Buffi ng
Wheel
• Core: Leather
• Bore Ø: 6 mm
Wool Brush
• Core: Wood
• Bore Ø: 6 mm
Yarn Brush
• Core: Plastic
• Bore Ø: Conical
Wool Cone
The wool cone is manufactured
in such a way that it can be
mounted on a conical polishing tip.
A different kind of fi xing is not
available. Due to the length of the
axis unbalanced run may occur.
• Core: Wood
• Bore Ø: Conical
Wool Brush
• Core: Plastic
• Bore Ø: Conical
3474 00
125 mm 30 mm
3416 10
100 mm 10 mm
3561 00
70 mm 35 mm
3582 00
80 mm 25 mm
3575 00
90 mm 20 mm
3571 00
30:15 mm 70 mm
To prevent polishing buffs from fraying these can be napped
before fi rst use using a sharp object. However due to the
properties of the material cotton cloth is not completely free
of fl uff.
For all buffi ng wheels with plastic core
Plastic cores have conical borings. While attaching to the
po lish ing tip, the cone of the tip and the boring have to match.
Corresponding to the “European Safety Regulations for the
correct use of grinding wheels” the following has to be
observed:
1. Wheels with a total diameter of 100 mm or more have to be
fl anged ⅔ on both sides.
2. The maximum running speed has to be observed.
3. During operation safety goggles (see catalogue page A 51
and the whole range in the accessories catalogue) have to
be worn.
Tips & Tricks Perfectly Polished – page E 32 and E 33
Silicone Impregnated
Muslin Wheel
This silicone impregnated fabric
structure offers signifi cant advan-
tages: it increases the life of the
buffi ng wheel, due to elimination
of fl uff. They require less pressure
during the polishing process and
save 50 % on polishing paste.
• Core: Plastic
• Bore Ø: 6 mm
3472 00
100 mm 12 mm
E36
Please take note of our new small tools assortment including the silicone polisher No. 2240 57 on page C 31.
3145 00
Polishing Paste
• Finest polishing compounds
• High amount of grease: smears
more easily and cools off faster
3128 00 3129 01
For No. 3128 00 and 3129 01
Finest polishing compounds contain an especially fi ne and treated polishing powder. The speed of the polishing machine should be very slow and you
should use felt discs.
Poligreen
Buffi ng and smooth polishing:
Cloth buffi ng wheels
White metals
approx. 60 g
3144 00
Buffi ng and smooth polishing:
Cloth buffi ng wheels
Plastic and caoutchouc rubber
approx. 60 g
Applications with approx. 2,800 rpm:
Field of application:
Weight:
Poliblue
Chamois Polishing Paste
• Finest polishing compounds
• Grease free: has no cooling
effect during polishing
High gloss polishing: Cloth buffi ng wheels
CR 39, precious metals
approx. 50 g
High gloss polishing: Cloth buffi ng wheels,
wool wheels
CR 39, precious metals
approx. 100 g
Applications with approx. 2,800 rpm:
Field of application:
Weight:
Polired
3143 00
Buffi ng and smooth polishing:
Cloth buffi ng wheels
Gold, steel
approx. 60 g
Applications with approx. 2,800 rpm:
Field of application:
Weight:
Tips & Tricks Perfectly Polished – page E 32 and E 33
E37
3118 00
Grinding Wax, brown
Rough polishing: Cloth buffi ng wheels
(approx. 2,300 rpm)
Plastic
approx. 200 g
3120 00
Buffi ng and smooth polishing:
Wool wheels, cloth buffi ng wheels
Plastic, optyl
approx. 700 g
Applications with approx. 2,800 rpm:
Field of application:
Weight:
Polishing Wax, blue
3125 00
Burnishing Wax, beige
Smooth polishing: Wool wheels,
cloth buffi ng wheels
Plastic
approx. 200 g
3122 00
High glossing polishing: Wool wheels
Plastic
approx. 200 g
Applications with approx. 2,800 rpm:
Field of application:
Weight:
Burnishing Wax, beige
Polishing Wax, blue, for Polycarbonate
The polishing paste is a high gloss polishing paste with “Dia mantine” being perfectly suited for polishing
Poly carbonate lenses as well as for the materials Titanium, Platinum and Palladium. The best polishing
results will be achieved with the felt cloth No. 3457 00 which has a patented conical fl ange (refer to page
E 34).
3127 00
High gloss polishing: Felt cloth buffi ng wheel,
wool wheels
Polycarbonate, Titanium, Palladium, Platinum
approx. 100 g
Applications with approx. 2,800 rpm:
Field of application:
Weight:
Tips & Tricks Perfectly Polished – page E 32 and E 33