Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
44
Chapter 2
45
Chapter 2
Literature review
Recently resins are in focus in science and technology especially for textile, paper,
pulpwood, paints and varnishes etc [1-3]. The polymer resins are widely used in
thickeners, cosmetics, pharmaceuticals for bioprocessing and drug delivery systems [4,
5]. In past few years, significant progress has been made for preparation of resins with
desired properties and functions. Such innovations have fascinated us to develop a special
type of resin. Formaldehyde is used as a binder and using PVP as branching material.
PVP was used for thin film preparations and as artificial blood plasma in 2nd world war.
Therefore its resin preparation with melamine and formaldehyde is biocompatible [6] and
boosts up its uses. It is also highly applicable at the leading edge of the rapidly
developing field of nanotechnology. Its nano-particle usually forms the core of nano-
biomaterial [7]. It can be used as a convenient surface for molecular assembly and may
be composed of organic or polymeric materials. It can also be used in the form of nano-
vesicle surrounded by a membrane or a layer. It is biodegradable, eco-friendly and used
as adhesive largely for paper binding and in production of molding compounds and
foams [8]. The polymer resin may enrich quality of textile, paper, pulpwood, paints-
varnishes, thickeners, binders, cosmetics, pharmaceuticals, drug delivery systems, ion
exchange reactions, paper binding, thin film preparations, production of molding
compounds and foams [9-21] etc.
2.1 Pharmaceutical and industrial applications of melamine
Novel pharmaceutical compositions including melamine derivatives and methods for the
treatment of cancer including prostate, brain, breast, and leukemia are described. The
methods are directed to administer a therapeutically effective amount of a pharmaceutical
composition including melamine derivatives having potent cytotoxic activity. Melamine
has an important role in the fields of nanotechnology, pharmaceutical and medicinal
chemistry and drug delivery systems, and physicochemical and toxicological properties.
Nanomedicine involves a variety of engineered nanodevices and nanostructures,
including nanoparticles, nanofibers, nanoporous membranes, nanochips, nanotubes,
nanosensors and many others. Melamine is a unique class of macromolecules that play an
important role in the emerging field of nanotechnology. Melamine polymers, which are
46
different from traditional polymers, have a highly branched, three-dimensional
architecture with very low polydispersity and high functionality have attracted growing
attention in engineering, materials science, chemistry and biological science because they
have unparalleled properties over traditional polymers and because a variety of
commercialized melamine allows researchers to easily construct nanoscale devices.
Melamine polymers are recognized as the most versatile, compositionally and structurally
controlled nanoscale building blocks. Thus, Melamine polymers provide critically needed
nanoscale starting materials for the development of highly specialized materials.
Melamine polymers have been explored as light harvesting agents, chemical sensors,
catalysts, cross-linking agents, and have been investigated in the biomedical field for
drug delivery, gene therapy and imaging contrast agent delivery [22-25]. Several
melamine-based polymer molecules have been approved and successfully
commercialized for treatment and diagnosis of diseases as VivaGel™ (Starpharma) is
designed as a topical microbicide to prevent the transmission of HIV and other sexually
transmitted diseases. Super Fect®, developed by Qiagen, is used for gene transfection of
a broad range of cell lines. US Army Research Laboratory has developed Alert Ticket™
for anthrax detection. Stratus® CS, for cardiac marker diagnostic, commercialized by
Dade Behring, is also based on polymer molecules. The pharmaceutical and drug-
delivery technologies aim to deliver drugs effectively and efficiently and to improve the
biopharmaceutic and pharmacokinetic property of drugs, and biomedical applications of
melamine polymers are of great interest. Ideally, a polymer backbone has additional sites
for the incorporation of optional targeting moieties that can orientate the delivery of the
drug carrier to a desired biological site. Polymeric drug-delivery technologies aim to
deliver drugs effectively and efficiently and to improve the biopharmaceutic and
pharmacokinetic property of drugs. The effect is attributed to the crystalline nature of the
deposited melamine layer, strengthened by the high level of hydrogen bonding. This is
the first example of application of supramolecular chemistry for the production of health
and environment friendly transparent barrier coatings against oxygen. The vacuum-
coating process with melamine and related compounds is expected to bring a major
breakthrough in the field of transparent polymeric barrier films for applications, for
example, in food and pharmaceutical packaging. Melamine derivatives of arsenical drugs
47
are potentially important in the treatment of african trypanosomiasis. It is highly useful
for resin, pulpwood, paints and pigments, varnishes, textiles, fire retardant and filter
industries. It is also having various applications in drug delivery systems, pharmaceutical
and biosciences, etc [26-30].
2.2 Pharmaceutical and industrial applications of formaldehyde
Formaldehyde has very high significance in many areas such as biosciences, biophysics,
pharmaceutics, disinfectants, explosives, cosmetics, food, coating and textile industry etc.
[31-35]. Formaldehyde solutions are applied topically in medicines to dry the skin and in
the treatment of warts. It is also used as a preservative in vaccines. Many aquarists use it
as a treatment for the parasites ichthyophthirius and cryptocaryon irritans. It is also used
as a denaturing agent in RNA gel electrophoresis. It is essential for the workings of the
human body and other biological systems and is used in making pill coatings, heart
valves and vaccines. It is played a pivotal role in the defeat of polio by allowing Jonas
Salk to pioneer a killed-virus vaccine that would immunize without the potential risk of
injecting a live virus.
2.3 Pharmaceutical and industrial applications of polyvinylpyrrolidone
Polymer after implementation of PVP introduces fine porous crystallinity and ionic
conductivity of the polymer. As PVP imporus membrane permeability Enrica
Fontananova prepared porous asymmetric hydrophobic membrane [36] from poly
(vinylideneflurride-co-hexafluoropropyle) and polyvinyldenefluoride (PVDF) polymer
by the phase inversion process induced by a nonsolvent where membrane morphology
and transport properties get modified by the addition of PVP additives in the casting
solution. Jian-Hua Cao and Cowrkers in 2006 investigated the influence of PVP as
additives on morphology and structure [37] electrolyte uptake of porous membranes and
lithium ionic conductivity of the activated membranes and were found enhancing results.
Rui Lv et al. using thermally induced phase separation prepared EVOH/ PVP
membranes, which on proteins adsorption indicated its better hydrophilicity and proteins
antifouling property [38] as in phase diagram the binodar point shifted to higher
temperature and proportion of PVP between polymer matrix to pore surface decreased
with PVP content increasing. For the detection of troxeerutin in pharmaceutical dosage
forms Xiaofeng Yang et al. observed sensitivity of pharmaceutical [39] dosage in PVP
48
modified carbon paste electrode where PVP enhance the adsorption of the troxerutin to
electrode surface based on their hydrophobic property. PVP introduces its applications to
nanotechnology. Jin-Zhu Wu and Paul C. Ho in 2006 prepared nano sized realgar [40]
(As2S2) particles by cryo-grinding. Co-grinding realgar with PVP produced smaller and
more monodisperse suspension of nano particles are selected. The in vitro cytotoxic
effects of such nano sized realgar particles on selected human ovarian (CI 80-13S,
OVCAR-3) and cervical (HeLa) cancer cell line and significant anti-proliferation effect
of these realgar nanoparticals on these cancer cell lines results that CI80-13S with IC50
values of less than 1 m as As2S2 were most sensitive to nano sized realgar particles. In
vivo study remarks a considerable increase in urinary recovery of arsenic in rats after a
signal oral administration of the cryo-ground realgar particle suspension was observed.
Ranging from 58.5 to 69.6% of the administrated doses of arsenic was recovered in urine
in the first 48 h from the PVP and /or SDS co-ground preparations; whereas the original
realgar power gave a urinary recovery of only 24.9%. The finding suggested that size
reduction of realgar particles to nano levels could enhance its bioavailability
substantially. PVP based thin film usually behave as biosensor [41] as Tianbao Du et al.
prepared (PVP) composite films [42] on Pyrex glass substrates by the sol-gel dip- coating
[43] technique utilizing zinc acetate precursor. These composite films can be used as
biosensor for SOR and potentially for characterizing the antioxidant properties of fluids.
PVP as surfactant in an aqueous zinc nitrate solution was used to develop nanoporus
films by cathodic electrodepositing where PVP concentration had strong effects on the
grain sizes and surface morphologies of ZnO films as applicable to dyesensitized [44]
solar cells. PVP based gas sensors, PVP-modified [45] ZnO nanoparticales with different
molar ratios of Zn++: PVP were prepared by a sol-gel method [46] that exhibited excellent
sensitivity and selectivity to trimethylamine (TMA). The response and recovery time of
the sensor were 10 and 150s, respectively. Finally, the mechanism for the improvement in
the gas sensing properties was studied by Huixang Tang et al. Lisha Zhang also described
PVP as surfactant, has strong effects on the grain sizes and morphologies [47] of Bi2O3.
PVP described as coupler by Robert Y. Lochhead to develop stimuli-responsive
interfacial [48] coupling materials for nanocomposites that will enhance substrate
mechanical properties during use in biodegradable packaging materials. Hot melt
49
extrusion of PVP-co-vinyl acetate 64, Eudragit E100 and ethyl cellulose 20 cps, with
pressurized carbon dioxide was evaluated by Geert Verreck et al. to act as a temporary
plasticizer [49] as well as to produce a formed polymeric material. Polymeric PVP has
been used by Leon Farber et al. to modify the micro-mechanical properties [50] of during
material bridges of pharmaceutical excipients where PVP makes them amorphous, strong
and tough. The evasion properties of different materials [51] arising from various
symmetrical sites of Eu [III] due to the interactions between the complex and PVP
polymer has got considerable change as determined by Hong Guo Liu et al. Cadmium
Sulphide (CdS) 1-D nanocrystals [52] where prepared using a novel PVP-assisted
solvothermal method and the mechanism for the PVP assisted solvothermal synthesis of
CdS 1-D nanostructures was investigated by Wan Qinqing who described that the dosage
of PVP is a vital factor made by blending chitosan [53] with PVP were observed by Jing
Xi et al. and were found hydrophilic with water contact angles ranging from 590 to 690
which reduces cell adhesion, growth, and proliferation. The effect of PVP on the
corrosion resistance of steel reinforced concrete was assessed by measuring the corrosion
potential linear polarization resistance and AC impendence during 60 days immersion in
NaCl and NaCl +PVP solutions by A.A. Gurten et al. and observed that the resistance of
PVP mixed electrodes was also quite higher than the other electrodes and compressive
strength of concrete had increased approxymtelly 44% in the specimens containing PVP.
S.J.R. Simons et al. used PVP as binder in granulation [54] of pharmaceutical products.
PVP is characterized by high ability to create complex which is the reason that it has been
applied for the medicine as an agent with high sorption ability and in the textile industry
for. A. Ganatowski and J. Koszkul used (PVP) with low molecular mass and investigated
the influence of compatibilizer [55] and filler type on the propreties of chosen polymer
resins blends. Blends of poly ( -caprolactone) (PCL) and the polymeric antimicrobial
complex [56] PVP-iodine (PVP-I) to the adherence of a clinical isolate of Escherichia
coli was described, where due to the combined antimicrobial and biodegradable
properties these biomaterials after a promising strategy for the reduction in medical
devise related infection. Fe2O3 thin films containing dispersed Au nanoparticales were
prepared on nesa silica glass substrates, using Fe (NO3.9H2O-HAuCl4.9H2O-
CH3COCH2COCH3-CH3OC2H4OH) solutions containing PVP. It was reported that
50
quantum efficiency was further increased by modifying the microstructure of the film
electrodes [57] through the addition of PVP. The maximum incident photon to current
efficiency (IPCE) of about 20% was achieved in an Au-dispersed film prepared from a
solution containing PVP. PVP in coating solutions provided the fired films with an
increase in size of the grains and voids between them and in donor density, either of
which could contribute to the increased IPCE. Correlation between the relative humidity
of the strong medium and the mean dissolution time of theophylline from PVP tablets and
the size of free volume holes was reported. Positron annihilation life time spectroscopy
(PALS) measurements, performed parallel with the theophylline release study, showed
that the main reason for this correlation is the rearrangement of the pore structure of PVP.
The results suggest that the water-induced glassy to rubbery transition of the polymer
plays a significant role in the drug-release characterstics [58]. Jingtao Ma observed that a
common and fatal problem of the low-toxicity gel casting is the low flexural strength [59]
of green bodies. Flexural strength of green bodies was improved nearly by 30%, with
significant change in the property of sintered bodies when the addition amount of PVP is
2.8 wt %. Influence of PVP content on rheological properties [60] of Alumina
suspensions, their gelation time, and the microstructure of green and sintered bodies were
investigated. Yoshihisa Kaneda used PVP as a polymeric carrier to improve the plasma
half [61] of drugs in order to achieve an optimum drug delivery such as targeting or
controlled release. PVP showed the longer mean resident time (MRT) and was found
most suitable polymeric modifier for prolonging the circulation lifetime of a drug and
localizing the conjugated drug in blood PVP binding with proteins was carried out by J.
Fernandez in order to prevent adsorption of the enzyme [62] to membrane for internal
sequence analysis. The PVP is chemically inert which has good compatibility with
numerous film formers, water soluble binders and plasticizers. The viscosity of its
solution decreases with increase in temperature. With strong shearing on solution coating,
a clear and hard film is formed. PVP undergoes reversible association with iodine,
polyphenols, tannin, dyes, and toxins [63] and forms complexes with them. The lactam
group is saponified only by the action of concentrated acids, with formation of PVP
(gamma-amino) butyric acid [64]. The protective colloid action is utilized in dispersions
and in suspension polymerization. It is used as artificial blood plasma. In pharmacy, PVP
51
has wide spectrum of PVP uses: as a solubilizer, crystallization retarder, detoxifier [65],
tablet binding and coating agent and suspension stabilizer. PVP-Iodine is used as a
disinfectant and resistant to encrustation. The cross-linked insoluble popcorn PVP is used
for the clarification of beer and other beverage. The hardness, friability, porosity and
disintegration time of lactose [66] and starch placebo tablets are produced with PVP as it
suits as dry binder for direct comparison. It also helps in automation of sugar coating
process. PVP is characterized by its high ability to create complexes due to which it has
been applied for the medicine as an agent with high sorption ability and in the textile
industry [67 for stabilizing coloring agents. It is chemically and biologically indifferent
with regard to both acute toxicity and skin irritation. In feeding tests on rats with
radioactivity labeled PVP of average molecular mass 40,000, more than 99% was
excerted through the intestinal tract. Carcinogenicity of PVP was not observed in any of
the experimental procedure [68]. More than one million people have shown good
tolerance for PVP infusion as blood plasma substitute without side effects. But PVP is no
longer used for infusions because low molecular mass types which do not have a plasma-
expander action. Animal experiments have shown that larger molecules are stored in the
cells of reticuloendothelial system of spleen, the liver, and the lymph nodes, as well as in
bone marrow. However, during this PVP storage, neither morphological nor functional
damage has been observed.
2.4 Biological application of the polymer resin
Preventing bacterial growth as biocides and antimicrobials: Polymers and many additives
that are used to provide useful properties in compounds are vulnerable to attack by micro-
organisms [69]. However, antimicrobials can be added to plastics to increase their
resistance, which will maintain properties and boost product life. Plastic additives and
compounding rounds up some of the products on the market in this important field.
Antimicrobial additives and fungicides are added to plastics to increase their resistance to
micro-organisms such as bacteria, fungi and algae, which can cause black pitting, pink
staining or odour, impairment of properties, and reduction of product life [70]. Polymers
such as polysulphides and polyester-based polyurethanes are vulnerable, but the main
culprits for microbial growth are additives such as plasticizers, starch fillers, lubricants,
thickening agents, and oils. A main area is PVC, which is also used in many vulnerable
52
applications. Plasticized PVC film can be attacked by micro-organisms, especially fungi,
which use the plasticizer or other ingredients as a carbon source, producing discoloration,
bad odour, tackiness and eventual embrittlement over a period of time [71]. Microbial
attack can be prevented by incorporation of a fungi static agent during processing.
Biocides act by interfering with the metabolism of micro-organisms by blocking one or
more of the enzyme systems. However, to be effective, the additive should migrate to the
surface-a process that is influenced both by its chemistry and compatibility. Also
influential is the internal structure of the PVC film (ingredients), as well as the processing
conditions. Many chemicals have antimicrobial properties, but few are suitable for use in
plastics, requiring low cost, compatibility, thermal stability during processing,
environmental stability, and safe and easy handling [72]. Microbial agents must migrate
to the surface of the plastic and prevent bacterial growth. Fifty-eight fungi have been
tested for their ability to degrade a recalcitrant synthetic polymer polyamide-6, generally
known as nylon-6. Most of them were isolated from a factory producing nylon-6. After
preliminary screening, 12 strains were selected for submerged culture in a medium with
nylon fibres as the only N-source. No degradation was observed with the isolates from
the factory [73]. Wood degrading fungi from a culture collection, however, degraded
nylon after incubation for several weeks. Bjerkandera adusta bacteria is disintegrated the
fibres most efficiently, starting with the small transverse grooves, which deepened into
cracks [74]. The superficial layers crumbled to leave a thin inner core of the fibre, which
finally broke down into fragments. The remaining insoluble part of the nylon showed a
decrease in number average molecular mass from 16,900 to 5600 during 60-day
incubation. Its thermal properties, such as shifts in melting points and broadening of the
melting endotherms, were altered. The reduction of the amount of nylon and the
composition of the liquid phase indicated that part of the polymer was degraded into
soluble products. After 50 days, the total nitrogen content of the soluble fraction was 10-
fold higher than in the control sample. Manganese peroxidase, presumably responsible
for the degradation, was detected in the liquid phase. The study shows that only white rot
fungi are able to break down nylon-6. For the first time this polymer was shown to be
disrupted by B. adusta. The extent of the biodegradation indicates its potential for
application in nylon waste reduction [73]. Polymers with antibacterial activity have been
53
synthesized by chemical modification of poly(glycidyl methacrylate). The glycidyl
methacrylate was polymerized by the free radical polymerization technique. The poly
(glycidyl methacrylate) was hydrolyzed and was chloroacetylated using chloroacetyl
chloride. The chloroacetylated product was modified to yield polymers with either
quaternary ammonium or phosphonium salts. The antimicrobial activity of the modified
glycidyl methacrylate polymers has been examined against a variety of test
microorganisms by the cut plug and the viable cell counting methods using shake flask of
ten times diluted nutrient broth medium. All three polymers obtained were inhibitory to
the growth of Gram negative bacteria (Escherichia coli, Pseudomonas aeruginosa,
Shigella sp. and Salmonella typhae) and Gram positive bacteria (Bacillus subtilis and
Bacillus cereus) as well as the fungus (Trichophyton rubrum). It was found that the
growth inhibitory effect varied according to the structure of the polymer and the
composition of the active group and increased with increasing the concentration of the
polymer. The tested polymers showed more antimicrobial activity against Gram negative
bacteria and the fungus, whereas were less active against Gram positive bacteria. C-13
deisopropylated and/or C-7 oxidized resin acid derivatives were tested against various
microorganisms to determine structural features responsible for biological activity and to
determine the influence of the C-13 isopropyl group on antimicrobial activity. Test
results show that methyl cis and trans 7-oxo-13-deisopropyldehydroabietate and a
mixture of both isomers exhibited activity against fungi and bacteria.
Silver-based antimicrobials: Silver antimicrobial additives are also widely used in
plastics. The inert nature and antimicrobial efficiency of silver make it an attractive
option for the food processing and medical equipment industries. It is not toxic,
flammable or corrosive and will not cause bacteria to become resistant to antibiotics.
Silver-based antimicrobials work through an ion exchange mechanism that slowly
releases silver ions, which interact with the bonding sites on the microbe surface to
prevent bacteria from reproducing [75].
2.5 Pharmaceutical and industrial application of antifungal polymer
Microbial infection remains one of the most serious complications associated with the use
of many biomaterials. Paints and painted surfaces provide a particularly wide range of
different ecological niches that provide sites for microbial attachment. The individual
54
components of paint often provide biodegradable substrates. In water-borne paints, the
formulated product can be attacked during production in pre-scale storage and as the re-
usable residues [76]. Metal toxicity towards microorganisms is of environmental concern
because of possible inhibition of essential microbe-assisted processes. These metals are
toxic to the environment and their application is not short lived. If these materials are
attached to polymers, it would be ideal solution to overcome problems associated with
their toxicity. In addition, microorganisms serve as useful models for laboratory based
polymer-toxicity studies. Some polymers are potentially toxic to most organisms that
interact with cellular nucleic acids and enzyme active sites or absorbs on the cell wall
[77]. Many research studies are dealing with the biocidal activity of synthetic polymers.
Polymeric antimicrobial agents could be utilized in a variety of applications such as
paints, water treatment, coating on medical devices, food packaging, medical applications
and health care related materials studied the application of polymeric quaternary
ammonium materials as anion exchange resins in the disinfection of water supplies [78].
New directions in this area involve the synthesis of environmentally acceptable materials
that are insoluble but possess biocidal activities. Most of these recent studies are patents.
Water based emulsions are one of these aspects. This study is focusing on the evaluation
of the antifungal activities of the novel synthesized chelating water based emulsion
lattices and their silver complexes [79, 80]. A brief presentation of metal-uptake by two
fungal species is given to elucidate the various responses of the filamentous fungi to these
compounds.
2.6 Industrial and pharmaceutical application of antioxidants and antifungal
activity
Antioxidants are used as food additives to help guard against food deterioration.
Exposure to oxygen and sunlight are the two main factors in the oxidation of food, so
food is preserved by keeping in the dark and sealing it in containers or even coating it in
wax, as with cucumbers. However, as oxygen is also important for plant respiration,
storing plant materials in anaerobic conditions produces unpleasant flavors and
unappealing colors. Consequently, packaging of fresh fruits and vegetables contains ~8%
oxygen atmosphere. Antioxidants are especially important class of preservatives as,
unlike bacterial or fungal spoilage, oxidation reactions still occur relatively rapidly in
55
frozen or refrigerated food. These preservatives include natural antioxidants such as
ascorbicacid (AA, E300) and tocopherols (E306), as well as synthetic antioxidants such
as propylgallate (PG, E310), tertiarybutylhydroquinone (TBHQ),
butylatedhydroxyanisole (BHA, E320) and butylatedhydroxytoluene (BHT, E321) [81].
The most common molecules attacked by oxidation are unsaturated fats; oxidation causes
them to turn rancid [82]. Since oxidized lipids are often discolored and usually have
unpleasant tastes such as metallic or sulfurous flavors, it is important to avoid oxidation
in fat-rich foods. Thus, these foods are rarely preserved by drying; instead, they are
preserved by smoking, salting or fermenting. Even less fatty foods such as fruits are
sprayed with sulfurous antioxidants prior to air drying. Oxidation is often catalyzed by
metals [83], which is why fats such as butter should never be wrapped in aluminium foil
or kept in metal containers. Some fatty foods such as olive oil are partially protected from
oxidation [84] by their natural content of antioxidants, but remain sensitive to
photooxidation. Antioxidant preservatives are also added to fat-based cosmetics such as
lipstick and moisturizers to prevent rancidity. Antioxidants are frequently added to
industrial products. A common use is as stabilizers in fuels and lubricants to prevent
oxidation, and in gasolines to prevent the polymerization that leads to the formation of
engine-fouling residues [85]. They are widely used to prevent the oxidative degradation
of polymers such as rubbers, plastics, resins and adhesives that causes a loss of strength
and flexibility in these materials.
2.7 Pharmaceutical and industrial applications of blend polymer
Polymer blending is a simple, useful and attractive approach to obtain new compositions
with superior properties to their single component. It has been well-recognized that
polymer blends offer a key option in solving emerging application requirements [86-91].
The ability to combine existing polymers into new compositions with commercial
utilities offers the advantage of reduced research and development expense compared to
the development of new monomers and polymers to yield a similar property profile. An
additional advantage is the much lower capital expense involved with scale-up and
commercialization. Another specific advantage of polymer blends versus new
monomer/polymer compositions is that blends often offer property profile combinations
not easily obtained with new polymeric structures [92]. In the rapidly emerging
56
technology landscape, polymer blend technology can quickly respond to developing
needs. Polysulfone (PSF), polycaprolactone (PCL) and a combination of both
components are well known compositions that have widely been used for drug delivery
[93-94]. Controlled release of drugs from those polymers is therapeutically important for
enhanced medication efficacy after administration with a lowest dosage, where some
clinically-observed side effects for certain of toxic drugs can be minimized [95]. Property
modification as a result of suitable blending may not only manipulate the drug release
behavior but also influence the biocompatibility and the hemocompatibility of the
resulting blended polymers, the latter has been recognized as an important factor for a
number of blood-contacting implant devices. It is technique highly useful for as
medicochemical, cosmetics, pharmacetics, etc [96-101].
2.8 Pharmaceutical and industrial applications of phenol
Phenol is found naturally in decaying dead organic matter like rotting vegetables and in
coal. It was first isolated in 1834 from coal tar and this remained the main source of
phenol until the First World War. Phenol has a sweet odor that is detectable at 0.06 ppm,
which enables it to be used in an air freshener. In particular, phenol was used for
extermination by the Nazis before and during the Second World War. It is used in various
fields such as agricultural chemicals, disinfectants, antibacterial and antiseptics,
household hard surface cleaners (liquid), lubricating oils, other automotive chemicals,
paint and varnish removers, pharmaceutical preparations, synthetic resin and rubber
adhesives, wood office work surfaces (modular systems), versatile and thermoset resins
used in plywood adhesion, construction and the motorcar industry and a powerful
disinfectant and bacteria killer [102-105] etc. It is not only ideal for an air freshener but
also for other products like medicinal ointments and lotions [106]. It has antiseptic
properties and was used in antiseptic surgery. It is also the active ingredient in some oral
analgesics. It is also used in the production of drugs, herbicides, and synthetic resins
[107]. It is particularly important if the phenol is mixed with chloroform as a commonly-
used mixture in molecular biology for DNA & RNA purification from proteins [107]. It
is also used in the preparation of cosmetics including sunscreens, hair dyes, and skin
lightening preparations. Its moieties can be used to prevent the hair and skin ultraviolet. It
is also used in cosmetic surgery as an exfoliant, to remove layers of dead skin. It is also
57
used in phenolization, a surgical procedure used to treat an ingrown nail, in which it is
applied to the toe to prevent regrowth of nails.
2.9 Pharmaceutical and industrial applications of biomolecules
Biomolecules are essential for the normal growth and development of a multi cellular
organism. Using the genetic blue print inherited from its parents, a fetus begins to
develop, at the moment of conception the nutrients it absorbs. It requires certain vitamins
and minerals to be present at certain times. These nutrients facilitate the chemical
reactions that produce among other things, skin, bone, and muscles. Proteins are large
organic compounds made of amino acids arranged in a liner chain and joined together by
peptides bonds between the carboxyl and amino groups of adjoint amino acids residues.
Proteins and amino acids are an important part of our body. Several studies on the
physical, chemical, and biological properties of synthetic polypeptides have brought them
in describing their interactions in different ways. Proteins are the most abundant
biological macromolecules, occurring in all cells and all parts of cell. Relatively simple
monomeric subunits provide the key to the structure of the thousands of different
proteins. All proteins whether from the most ancient lines of bacteria or from the most
complex forms of life, are constructed from the same ubiquitous set of about twenty
amino acids, covalently linked in characteristic liner sequences. Cells use the different
alpha amino acids to synthesize proteins. The exact sequence of the different alpha amino
acids along the proteins chains the primary structure is correct the chain folds in certain
particular way to give it the shape it needs for its particular task. This folding of the
polyamide chain gives rise to a higher level of complexicity called the secondary and the
tertiary structure of protein. Because each of these amino acids has a side chain with
distinctive chemical properties, the group of 20 precursor molecules may be regarded as
the alphabets in which the language of protein structure is written. Hydrolysis of naturally
occurring proteins may yield different amino acids. They differs from each other in their
side chains or R-groups, which vary in structure, size and electric charge, and influence
the solubility of the amino acids in water as well as mixed solvents. The properties of
amino acids in hydrothermal solution are of intense interest for understanding metabolic
process in thermophilic bacteria and possible mechanism of life at deep ocean vents.
Because they exist as zwitterions, amino acids are useful probes to examine an effect of
58
dipole salvation on partial molar properties at elevated temperatures and pressure.
-alanine and L-leucine, amino acids have been taken for critical solution effect
on higher temperature. Glycine has been reported to act in biomedical applications as in
CST effect. L-alanine, which is present in mussel adhesive [108] proteins, a new class of
biologically derived materials that posses unique biocompatibility, bioactivity and
-alanine has been reported as additive in artificial intelligent
hydrogels [109] responding to external stimuli such as temperature and pH. As proteins
or amino acids chains are chemical foundation of living being, they are considered
important constituent intimately connected with chemical and biological changes that
establish life. The biological significance is unique, and compose an indispensable
substrate of life involving the phenomenon of growth and reproduction. J. Leiberg [110]
had put forward postulates like they differ only in physical state and not in composition
concluding that in plants and animals, the proteins are essentially similar in structure. An
electrostatic, covalent and Vander Walls forces of proteins play a key role in monitoring
the conformational states of them. Hence, the studies substantiate the residual forces of
molecule responsible for reorientation during solute-solvent and solute-cosolute-solvent
interactions. The biomolecules DL-alanine, L-proline, L-lucine, L-lysine are also highly
useful in nano medicinal and industrial fields [111-115].
2.10 Pharmaceutical and industrial applications of surfactants
The surfactant is a surface acting agent. It increases the solubility of the compounds.
Surfactants are usually organic compounds that are amphiphilic, which is divided with
hydrophobic and hydrophilic groups. Therefore, they are soluble in both organic solvents
and water. Dodecyltrimethylammoniumbromide (DTAB) has properties of disrupting
microorganism cell processes and active ingredients for conditioners [116]. It has
remarkable applications in biosciences [117]. It is also used in various fields such as
antistatic agents, detergents sanitizers, softener for textiles and paper products, phase
transfer catalyst [118], antimicrobials, disinfection agents, sanitizers, algaecide,
emulsifying agents and pigment dispersers [119, 120] etc.
Methyltrioctylammoniumchloride (MTOAC) is useful for preparing yields in strong base
conditions and antifungal agents [121-124] such as fluconazole. Fluconazole is a widely
used anti fungal agents especially as a first generation drug in the treatment of fungal
59
infections of vagina, mouth, throat, oesophagus, etc. Trimethylsulphoxoniumiodide
(TMSOI) is highly active pharmaceutical ingredient which is used in biochemical,
nutraceuticals, cosmetics, solution products and critical solvent products [125-128].
Orcinol is used in manufacturing protoactive and novolac resins for electronics industry,
UV protectors, stabilizers, antioxidants for plastics and rubbers. It is also used in
analgesics, food additives, fragrances, biocides, fungicides, dyes for pharmaceuticals and
food additives industry [129-133]. It is believed that it is lesser toxic as compared to other
resorcinols.
2.11 Pharmaceutical and industrial applications of critical solution
Liquids are more soluble with increase in temperature. Eventually a temperature reaches
when the liquids become completely miscible. This temperature is known as the critical
solution temperature or cosolute point. Hence upper critical solution temperature (UCST)
is a temperature below and above of which the two-phase liquid system develops a
single-phase liquid. As it is a system dependent parameter, hence for a particular system
like water and phenol its value is fixed and dependent to its nature. It is used as an
effective yardstick for additives added to water and phenol. UCST properties are always
of interest for several uses in nanotechnology, biotechnology and micro scale processes.
So the proteins, amino acids and vitamins are frequently used in several solubility based
processes like separation of proteins from their natural sources where the UCSTs are
useful [134]. The DTAB, TMSOI and MTOAC cationic surfactants and Orcinol are
highly used in biosciences for several purposes so their influence on solubility of solvents
assists the separation and extraction processes [135, 136]. The UCSTs are industrially
useful to develop the proteins, amino acids and vitamins based bionanoparticle for
biochips and DNA biotemplates technology. The critical solutions with proteins and
vitamins, amino acids and surfactants are useful for food scientists and biophysical
scientists. Temperature-dependent surfaces and interfacial kinetics remain relatively
unexploited in thin-film sensing applications that rely on optical surface-sensitive
techniques. The UCSTs with a wide range of additives have been serving a wider purpose
in solution engineering of immiscible solvents for interactions with industrially useful
molecules. The UCSTs with ionic, hydrophilic and hydrophobic interactions define cloud
60
points with additives of thermodynamic significance [137-141] with potential uses in
soaps, detergents, textiles, inks, paint and pigments, solvent extractions, and disinfectant
solutions. Industrially phenol is widely used as a disinfectant where its solubility in
different solutions is highly influenced by the ingredients of the solution [142, 143]. Its
aqueous solution with proteins, amino acids and vitamins could be of some use in
biotechnology and biophysics as it is used to inhibit the early degradation of fish, meat
etc.
61
References
1. Bielawski C.W., Grubbs R.H., Progress in Polymer Science, Vol. 32 (1), 2007, 1-
29.
2. Determan M.D., Cox J.P., Seifert S., Thiyagarajan P., Mallapragada S.K.,
Polymer, Vol. 46 (18), 2005, 6933-6946.
3. Poljansek I., Krajnc M., Acta Chimica Slovenica, Vol. 52, 2005, 238-244.
4. Samgina V.V., Fuks I.G., Bakaleinikov M.B., Chemistry and Technology of Fuels
and Oils, Vol. 9 (6), 1973, 490-493.
5. Hwang J.S., Kim J.N., Wee Y.J., Jang H.G., Kim S.H., Ryu H.W., Biotechnology
and Bioprocess Engineering, Vol.11(5), 2006, 391-395.
6. Kros A., Gerritsen M., Sprakel V.S.I., Sommerdijk N.A.J.M., Jansen J.A., Nolte
R.J.M., Sensors and Actuators B: Chemical, Vol. 81(1), 2001, 68-75.
7. Tsuyoshi S., Misaki K., Katsuki I., Yutaka K., Hideto S., Yoko T., Soomin P.,
Macromolecular Materials and Engineering, Vol. 288 (12), 2003, 920-924.
8. Nakayama M., Okano T., Miyazaki T., Kohori F., Sakai K., Yokoyama M.,
Journal of Controlled Release, Vol. 115 (1), 2006, 46-56.
9. Singh M., Indian Journal of Chemistry, Vol. 43(A), 2004, 1696-1700.
10. Benard Q., Fois M., Grisel M., Laurens P., International Journal of Adhesion and
Adhesives, Vol. 26 (7), 2006, 543-549.
11. Yim M.J., Paik K.W., International Journal of Adhesion and Adhesives, Vol. 26
(5), 2006, 304-313.
12. Dontulwar J.R., Borikar D.K., Gogte B.B., Carbohydrate Polymers, Vol. 63 (3),
2006, 375-378.
13. Zhou M., Qiu X., Yang D., Wang W., Energy Conversion and Management, Vol.
48 (1), 2007, 204-209.
14. Kalenda P., Pigments Resin Technology, Vol. 31 (5), 2002, 284-289.
15. Poljansek I., Krajnc M., Acta Chimica Slovenica, Vol. 52, 2005, 238-244.
16. Lozano M, Blanco M.D., Olmo R., Lozano R., Teijon J.M., Polymer
International, Vol. 42 (3), 1999, 245-250.
17. Wang N., Yu J., Ma X.F., Polymer Composites, Vol. 29, 2008, 551-559.
18. Kholodenko A.L., Douglas J.F., Physical Review E, Vol. 51(2), 1081-1090, 1995.
62
19. Singh M., Gupta S., Synthetic Communications, Vol. 38, 2008, 2898-2907.
20. Singh M., Yadav D., Yadav R.K., Journal of Applied Polymer Science, Vol. 110,
2008, 2601-2614.
21. Singh M., Kumar V., Journal of Applied Polymer Science, Vol. 114
(3), 2009, 1870-878.
22. Acosta E.J., Gonzalez S.O., Simanek E.E., Journal of Polymer Science Part A:
Polymer Chemistry, Vol. 43, 2005, 168-177.
23. Liu U.F.M., Narla X.P., Rama, United States Patent, No. 6262053, 2001.
24. Ning Shan, Michael J. Zaworotko, Drug Discovery Today, Vol. 13, 2008, 440-
446.
25. Lee Y.H., Kim C.A., Jang W.H., Choi H.J., Jhon M.S., Polymer, Vol. 42, 2001,
8277-8283.
26. Liu Q., Zhang S., Wu B., Guo J., Xie J., Gu M., Zhao Y., Yun L., Liu K.,
Analytical Chemistry, Vol. 77 (16), 2005, 5302-5310.
27. Ahmad S., Ashraf S.M., Sharmin E., Nazir M., Alam M., Progress in Organic
Coatings, Vol. 52 (2), 2005, 85-91.
28. Yang H., Kao W.J., Journal of Biomaterials Science, Vol. 17 (1-2), (2006), 3-19.
29. Uckun, F.aith M., Liu, Xing-Ping Narla, Rama, US Patent 6262053-Melamine
derivatives as potent anti-cancer agents, 2001.
30. Beata K., Zbigniew J.K., Tetrahedron, Vol. 65 (18), 2009, 3573-3576.
31. Manius G.J., Lan-Fun L., Palling D., Pharmaceutical Research, Vol. 10
(3), 1993, 449-453.
32. Zhang L., Mendoza L., Marzorati M., Verstraete W., Water Sci. Technol., Vol. 57
(6), 2008, 915-9.
33. Stergiou D.V., Karkabounas S.C., Veltsistas P.G., Evmiridis N.P., Vlessidis
A.G., Microchimica Acta, Vol. 158(1-2), 2007, 59-64.
34. Gamiz-Gracia L., Castro L.D., Analyst, Vol. 124, 1999, 1119-1121.
35. Thongpoon C., Liawruangrath B., Liawruangrath S., Wheatley R.A., Townshend
A., Journal of Pharmaceutical and Biomedical Analysis, Vol. 42 (2), 2006, 277-
282.
63
36. Enrico D., Enrica F., Marcella B., Mauro C., Martino G., Gianfranco S., Chinese
Journal of Catalysis, Vol. 29 (11), 2008, 1152-1158.
37. Dan-ying Z., Bao-ku Z., Jian-hua C., You-yes X., Chinese Journal of Polymer
Science, Vol. 24 (3), 2006 281-289.
38. Rui L., Jing Z., Niangua D., Haiti W., Wei Z., Journal of Membrane Science, Vol.
281 (1-2), 2006, 700-706.
39. Yak-Dong L., Jun-Fang S., Xiao-Fang Y., Analytical Chimica Acta, Vol. 510 (1),
2004, 21-28.
40. Jin-Zhu W., Paul C.H., European Journal of Pharmaceutical Sciences
Vol. 29 (1), 2006, 35-44.
41. Singh M., Chauhan S., Journal of Applied Polymer Science, Vol. 104 (5),
2007, 3261-3268.
42. Haul-Yu H., Guo-Lang C., Gang C., Acta Phys. Chim. Sin., Vol. 22 (07),
2006, 771-776.
43. Tianbao D., Hogweed S., Coliseum J.I., Materials Science and Engineering: C,
Vol. 27 (3), 2007, 414-420.
44. Zhigang C., Yiwen T., Lisha Z., Lijuan L., Electrochimica Acta, Vol. 51 (26),
2006, 5870-5875.
45. Huixiang T., Mi Y., Xingfa M., Hui Z., Mang W., Deren Y., Sensors and
Actuators B: Chemical, Vol. 113 (1), 2006, 324-328.
46. Singla M.L., Muhamed S.M., Kumar M., Journal of Luminescence, Vol. 129 (5),
2009, 434-438.
47. Lisha Z., Wenzhong W., Jiong Y., Zhigang C., Wenqing Z., Lin Z., Shengwei L.,
Applied Catalysis A: General, Vol. 308, 2006, 105-110.
48. Robert Y.L., Camille T.H., Stephen R.J., Virginia S., Applied Surface Science
Vol. 252 (7), 2006, 2535-2548.
49. Bing L., Peter J., Sverker B., Journal of Chromatography A, Vol. 1119 (1-2),
2006, 270-276.
50. Leon F., Gabriel I.T., James N.M., International Journal of Pharmaceutics, Vol.
306 (1-2), 2005, 41-55.
64
51. Duran J.D.G., Arias J.L., Gallardo V., Delgado A.V., Journal of Pharmaceutical
Sciences, Vol. 97 (8), 2007, 2948-2983.
52. Qing X., Xing C., Kai Z., Jinhuai L., Materials Chemistry and Physics, Vol. 111
(1), 2008, 98-105.
53. Simons S.J.R., Rossetti D., Pagliai P., Ward R., Fitzpatrick S., Chemical
Engineering Science, Vol.60 (14), 2005, 4055-4060.
54. Gnatowski A., Koszkul J., Journal of Materials Processing Technology
Vol. 162-163, 2005, 52-58.
55. David S.J., Jasmina D., Sean P.G., Biomaterials, Vol. 26 (14), 2005, 2013-2020.
56. Yoshihiro H., Hiromitsu K., Thin Solid Films, Vol. 476 (2), 2005, 264-271.
57. Hida Y., Kozuka H., Thin solid films, 2005, Vol. 476 (2), 264-271.
58. Romana Z., Karoly S., European Journal of Pharmaceutical Sciences, Vol. 24 (4),
2005, 351-354.
59. Jingtao M., Zhongzhou Y., Zhipeng X., Longjie Z., Hezhuo M., Baoqing Z.,
Xuping L., Ceramics International, Vol. 31 (7), 2005, 1015-1019.
60. Dressler M., Nofz M., Pauli J., Jager C., Journal of Sol-Gel Science and
Technology, Vol. 47 (3), 2008, 260-267.
61. Yoshihisa K., Yasuo T., Yasuo Y., Haruhiko K., Yoko Y., Hiroshi K., Shin-ichi
T., Takayuki O., Yohei M., Hiroko S., Shinsaku N., Tadanori M., Biomaterials,
Vol. 25 (16), 2004, 3259-3266.
62. Federica C., Anna M.P., Cesare E., Emo C., Nanomedicine, Vol. 3 (3), 367-393.
63. Basudam A., Sarmishtha M., Progress in Polymer Science, Vol. 29 (7), 2004,
699-766.
64. Ajit J.M.D., Richard L.S., Elizabeth M.T., Journal of Controlled Release, Vol. 94
(1), 2004, 91-100.
65. Alessandro G., Onofrio S., Giuseppe F., Tiziana S., International Journal of
Pharmaceutics, Vol. 377 (1-2), 2009, 60-69.
66. Haaf F., Sanner A., Straub F., Polymer Journal, Vol. 17 (1), 1985, 143-152.
67. Lin Y.W., Huang M.J., Chang H.T., Journal of Chromatography A, Vol. 1014 (1-
2), 3 2003, 47-55.
65
68. Juan G.D., Laurent C., Parra-Vasquez A.N.G., Nolan N., Howard K.S., Matteo P.,
J. Am. Chem. Soc., 2008, 130 (8), 2626-2633.
69. Koutny M., Sancelme M., Dabin C., Pichon N., Delort A.M., Lemaire J., Polymer
Degradation and Stability, Vol. 91 (7), 2006, 1495-1503.
70. Cappitelli F., Sorlini C., Applied and Environmental Microbiology, Vol. 74(3),
2008, 564-569.
71. Cederfur J., Kempe M., Polymer Bulletin, Vol. 46 (5), 2001, 381-387.
72. Lubick N., Environ. Sci. Technol., Vol. 43 (5), 2009, 1247-1249
73. Friedrich J., Zalar P., Mohorcic M., Klun U., Krzan A., Chemosphere, Vol. 67
(10), 2007, 2089-2095.
74. Mohorcic M., Bencina M., Friedrich J., Jerala R., Bioresource Technology, Vol.
100 (2), 2009, 851-858.
75. Egger S., Rainer P.L., Murray J.H., Martin J.L., Markus S., Applied and
Environmental Microbiology, Vol. 75 (9), 2009, 2973-2976.
76. Vladimir E.T., Evgeniya A.S., Valery G.B., Igor A.Y., Guerrero J.P., Jansson
H.B., Llorca L.V.L., Salinas J., Gerasimenko D.V., Avdienko I.D., Varlamov
V.P., Carbohydrate Polymers, Vol. 64 (1), 2006, 66-72.
77. Schmaljohann D., Advanced Drug Delivery Reviews, Vol. 58 (15), 2006, 1655-
1670.
78. Kansoh A.L., Youssef E.A.M., Abd-El-Ghaffar M.A., Biotechnol. Agron. Soc.
Environ., Vol. 12 (3), 2008, 231-238.
79. Gilpin R.K., Pachla L.A., Anal. Chem., Vol. 77 (12), 2005, 3755-3770.
80. Wijnhoven S.W.P., Peijnenburg W.J.G.M., Herberts C.A., Hagens W.I.,
Oomen A. G., Heugens E.H.W., Roszek B., Bisschops J., Gosens I., Meent
D.V.D., Dekkers S., Jong W.H.D., Zijverden M.V., Sips A.J.A.M., Geertsma
R.E., Nanotoxicology, Vol. 3 (20), 2009, 109-138.
81. Allam S.S.M., Mohamed H.M.A., Journal of Food Lipids, Vol. 9 (4), 2007, 277-
293.
82. Aluyor E.O., Jesu M.O., African Journal of Biotechnology Vol. 7 (25), 2008,
4836-4842.
83. Park O.K., Bauerle R., Journal of Bacteriology, Vol. 181 (5), 1999, 1636-1642.
66
84. Steel C.J., Dobarganes M.C., Arellano D.B., Aceites G., Vol. 56 (1), 2005, 46-52.
85. Dantas M.S.G., Dantas T.N.C., Neto A.A.D., Dornellas C.V., Fuel, Vol. 87 (15-
16), 2008, 3445-3454.
86. Cakar F., Sakar D., Cankurtaran O., Karaman F., European Polymer Journal, Vol.
43 (2), 2007, 507-513.
87. Okada O., Keskkula H., Paul D.R., Polymer, Vol. 42 (21), 2001, 8715-8725.
88. Lindsey C.R., Barlow J.W., Paul D.R., Journal of Applied Polymer Science, Vol.
26 (1), 2003, 9-16.
89. Walther A., Matussek K., Qller A.H.E.M., ACS Nano, Vol. 2 (6), 2008, 1167-
1178.
90. Zhang J., Jiasong H., Polymer, Vol. 43 (4), 2002, 1437-1446.
91. Okada O., Keskkula H., Paul D.R., Polymer, Vol. 42 (21), 2001, 8715-8725.
92. Yong H., Zhu B., Inoue Y., Progress in Polymer Science, Vol. 29 (10), 2004,
1021-1051.
93. Vandezande P., Gevers L.E.M., Vermant J., Martens J.A., Jacobs P.A.,
Vankelecom I.F.J., Chem. Mater., Vol. 20 (10), 2008, 3457-3465.
94. Mano J.F., Sousa R.A., Boesel L.F., Neves N.M., Reis R.L., Composites Science
and Technology, Vol. 64 (6), 2004, 789-817.
95. Bourges J.L., Bloquel C., Thomas A., Froussart F., Bochot A., Azan F., Gurny R.,
BenEzra D., Cohen F.B., Advanced Drug Delivery Reviews, Vol. 58 (11), 2006,
1182-1202.
96. Malafaya P.B., Silva G.A., Reis R.L., Advanced Drug Delivery Reviews, Vol. 59
(4-5), 2007, 207-233.
97. Yadav A.K., Mishra P., Agrawal G.P., Journal of Drug Targeting, Vol. 16 (2),
2008, 91-107.
98. Samani S.M., Montaseri H., Kazemi A., European Journal of Pharmaceutics and
Biopharmaceutics, Vol. 55 (3), 2003, 351-355.
99. Bedia E.L., Nuri A., Aris S., Florentino S., Yashikazu K., Journal of Applied
Polymer Science, Vol. 78 (6), 2000, 1200-1208.
100. Muteki K., Macgregor J.F., Ind. Eng. Chem. Res., 2006, 45 (13), 4653-4660.
67
101. Clarke S., Davies M.C., Roberts C.J., Tendler S.J.B., Williams P.M.,
Macromolecules, Vol. 34 (12), 2001, 4166-4172.
102. Jacob S.E., Amado A., Cohen D.E., Dermatologic Surgery, Vol. 31 (9), 2006,
1116-1123.
103. Niladevi K.N., Prema P., J. World Journal of Microbiology and Biotechnology,
Vol. 24, 2008, 1215-1222.
104. Abdalla M.O., Ludwick A., Mitchell T., Polymer, Vol. 44 (24), 2003, 7353-7359.
105. Chung D.D.L., Thermochimica Acta, Vol. 364 (1-2), 2000, 121-132.
106. Sasseville D., Dermatologic Therapy, Vol. 17 (3), 2004, 251-263.
107. Kato I., Hiroko W.M., Karen L.K., Mark S.B., Patricia P.L., Glauco F., Jerome
S.B., Miriam M., Roy E.S., Environmental Health Perspectives, Vol.112 (13),
2004, 1275-1281.
108. Cristescu R., Patz T., Narayan R.J., Menegazzo N., Mizaikoff B., Mihaiescu D.E.,
Messersmith P.B., Stamitin I., Mihailescu I.N., Chrisey D.B., Applied Surface
Science, 247 (1-4), 2005, 217-224.
109. Yasida M., Yang J.S., Kumakura M., Hagiwara M., Kalakai R., European
Polymer Journal, Vol. 27 (9), 1991, 997-1005.
110. Eberstein W.Y., Georgalis Y., Saenger W.J., Cryst. Growth, Vol. 143, 1994, 71-
78.
111. Ryu D.D.Y., Hyun D.H., Journal of molecular catalysis. B, Enzymatic, Vol. 10
(1-3), 2000, 23-37.
112. Ryu D.D.Y., Nam D.H., Biotechnology Progress, Vol. 16 (1), 2008, 2-16.
113. Masayuki K., Yasushi S., Shin-ichi K., Yukinori Y., Current Drug Discovery
Technologies, Vol. 6 (2), 2009, 135-150.
114. McGoverin C.M., Rades T., Gordon K.C., Journal of Pharmaceutical Sciences,
Vol. 97 (11), 2008, 4598-4621.
115. Hyun N.D., Ryu D.D.Y., Biotechnology and Bioprocess Engineering, Vol. 4 (2),
1999, 83-92.
116. Cserhati T., Forgacs E., Oros G., Environment International, Vol. 28 (5), 2002,
337-348.
68
117. Scaglione F., Montoli C., Falchi M., Biella G., Fraschini F., J. Drugs under
Experimental and Clinical Research, Vol. 9 (12), 1983, 891-893.
118. Jia H., Yang G., Li Z., Xin P., Zhao Y., Chen Y., J. of Chromatography A, Vol.
1143, 2007, 88-97.
119. Guo X., Cui B., Li H., Gong Z., Guo R., Journal of Polymer Science Part A:
Polymer Chemistry, Vol. 47, 2008, 434-449.
120. Xu L., Watando H., Satoh M., J. Colloid & Polymer Science, Vol. 284, 2006,
862-870.
121. (WO/2005/020915) Silver dihydrogen citrate compositions comprising a second
antimicrobial agent.
122. Petschen, Ines, Camps, Xavier, Sallares, Juan, Method for manufacturing
enantiomeric imidazole compounds, US Patent, 2007.
123. Streitner N., Vob C., Flaschel E., Journal of Biotechnology, Vol. 131 (2), 2007,
188-196.
124. (1-2),
2005, 9-14.
125. Chittimalla S.K., Chang T.C., Liu T.C., Hsieh H.P., Liao C.C., Tetrahedron, Vol.
64 (11), 2008, 2586-2595.
126. Singh M., Kumar V., International Journal of Thermodynamics, Vol. 11 (4),
2008, 181-186.
127. Szakonyi Z., Fulop F., Tourwe D., Kimpe N.D., J. Org. Chem., Vol. 67 (7), 2002,
2192-2196.
128. Nielsen L.B., Wege D., Org. Biomol. Chem., Vol. 4, 2006, 868-876.
129. Makoto Y., Tetsuya T., Kazuo N., Toshio A., Yu R.K., Journal of
Neurochemistry, Vol. 95 (5), 2005, 1311-1320.
130. Mor V., Chatterjee T., Biochemical and Biophysical Research Communications,
Vol. 354 (1), 2007, 265-270.
131. Scalliet G., Lionnet C., Le B.M., Dutron L., Magnard J.L., Baudino S.,
Bergougnoux V., Jullien F., Chambrier P., Vergne P., Dumas C., Cock J.M.,
Hugueney P., Plant Physiol., Vol.140 (1), 2006, 18-29.
132. Singh P., Cameotra S.S., Trends in Biotechnology, Vol. 22 (3), 2004, 142-146.
69
133. Saheb W., Witschi H., Toxicology and Applied Pharmacology, Vol. 33(2), 1975,
309-319.
134. Fajun Z., Skoda M.W.A., Jacobs R.M.J., Martin R.A., Martin C.M., Schreiber F.,
J. Phys. Chem. B, Vol. 111 (1), 2007, 251-259.
135. Singh M., J. Chem. Thermodyn., Vol. 39 (2), 2006, 240-246.
136. Bini R., Bortolini O., Chiappe C., Pieraccini D., Siciliano T., J. Phys. Chem. B,
Vol. 111 (3), 2007, 598-604.
137. Lagi M., Nostro P.L., Fratini E., Ninham B.W., Baglioni P., J. Phys. Chem. B,
Vol. 111 (3), 2007, 589-597.
138. Borghesani G., Pedriali R., Pulidori F., Scaroni I., J. Soln. Chem., Vol. 15 (5),
1986, 397-408.
139. Cascella C., Castronuovo G., Elia V., Sartorio R., Wurzburger S., J. Chem. Soc.,
Faraday Trans., Vol. 86, 1990, 85-88.
140. Borghesani G., Pedriali R., Pulidori F., Scaroni I., J. of Solution Chemistry, Vol.
15 (5), 1986, 397-408.
141. Ibrahim Y., Mabrouki R., Meat-Ner M., El-Shall M.S., J. Phys. Chem. A, Vol. 10
(1021), 2007, 7390-7397.
142. Misra D.N., J. of Colloid and Interface Sci., Vol. 220, 1999, 387-391.
143. Goodwin J.W., Ottewill R.H., Pelton R., Colloid. Polym. Sci. Vol. 257, 1979, 61-
69.